XDA member OneStepAhead was nice enough to give away some TPU Cases to fellow Photon users!
My Review of the High Gloss Black:
Ok got this TPU case this morning, and tossed it right on...been running around with it all day. Here's a few things I'll point out for you...
1. It fits perfectly- nice and snug. Cutouts are just right. Easy to put on / take off. No "give" doesn't feel like it'll get loose on ya.
2. The volume rocker and camera button are covered with a layer, instead of a cutout. Depends on your preference here...seeing as the Photon has a unique design on these buttons. I'm fine with it, as it is keeping me from toying with the tread on them. Heh.
3. Not overly slick. Easy to put in your pocket / remove. Seems to have enough friction to prevent dropping. Some of these gloss TPU cases are like holding a wet fish, while your hands are covered in baby oil. This one's just fine. (yeah...don't ask about the baby oil please! )
4. Lightweight - doesn't add any real bulk...most TPU cases don't
5. Great packaging - most of these type of TPU cases just come shipped to you in a plastic baggie. This had said plastic baggie, with another layer of protection inside that...plus a cardboard cutout. (it's the little things that impress)
I'll say in summation, that I've had an overall pleasant experience with this TPU case...and the Rep that sent it to me. Seems like decent Customer Service in my interactions. Of course, in all honesty a TPU case doesn't offer as much protection as an OtterBox...but overall it serves it's purpose!
TPU-CASES.COM
Bandage said:
XDA member OneStepAhead was nice enough to give away some TPU Cases to fellow Photon users!
Stay Tuned for User Reviews!!
TPU-CASES.COM
Click to expand...
Click to collapse
Hey thanks for making this thread! Much appreciated
This could be a helpful thread for me to gather input from you guys on how I can improve our cases in the future. Some of the things I'd like feedback on are the fit (is it tight, are all the cutouts properly aligned?) the volume rocker (is it easy to press? this is one of TPU's weaknesses, the volume rockers can sometimes be difficult) the power button cutout (do you like it? would you rather have it be a molded button like the volume rocker?) any other colors you'd like to see? I usually have more colors then just 2 made for the more popular phones but I only did High Gloss Black and High Gloss Smoke so far for the Photon so I'm open to ideas. Thanks everyone!
TPU Cases! U know just in case u need another genuinely honest review
Sent from my Phantastic Photon 4G
Reviewed 8/6/11!!!
Any chance these will come in other colors eventually?
Sent from my Photon
Received on saturday, initial impressions atr that its nice. better than I expected. I'll have my full review on monday.
Ben
Love mine. My review is on amazon. Brief and to the point. http://www.amazon.com/gp/aw/cr/B005FN35XG/ref=aw_d_crstars_wireless
Sent from my Motorola Photon 4g
On Youtube I found a review of a TPU case where the guy throws his phone out the window of a moving truck and the case protects the phone well. I'm gonna take their word for it and really have no interest in tossing my Motorola Photon 4G out the window of anything.
When I received the case in the mail on Saturday I quickly tore the package open and put it on my phone its a tight fit and my one complaint is that it when I tried taking it off it fit so well that it pulled the battery cover partially off. Certainly not a big deal and really is more of complaint against the phone rather than the case. If the battery cover on the Photon was not so flimsy it would not matter.
The case ads minimal bulk to the phone and really makes it feel better in your hand. The texture is a high gloss shiny black (I think I would like to see them make a matte black).
There are cutouts for the camera, kickstand, power/sleep button, headphone jack & one for both the HDMI and USB ports. All are aligned perfectly and look good. They have done a good job with the volume and camera rocker, they are not hard to press but does take a little practice to make it smooth. This is a surprisingly nice case and for under $10 you really can't beat it. They are available on Amazon for under $8 plus shipping and available from www.TPU-CASES.com for under $9 with free shipping.
I believe the case for the Motorola Photon 4G from TPU-Cases is an outstanding deal.
bbelhorn said:
On Youtube I found a review of a TPU case where the guy throws his phone out the window of a moving truck and the case protects the phone well. I'm gonna take their word for it and really have no interest in tossing my Motorola Photon 4G out the window of anything.
When I received the case in the mail on Saturday I quickly tore the package open and put it on my phone its a tight fit and my one complaint is that it when I tried taking it off it fit so well that it pulled the battery cover partially off. Certainly not a big deal and really is more of complaint against the phone rather than the case. If the battery cover on the Photon was not so flimsy it would not matter.
The case ads minimal bulk to the phone and really makes it feel better in your hand. The texture is a high gloss shiny black (I think I would like to see them make a matte black).
There are cutouts for the camera, kickstand, power/sleep button, headphone jack & one for both the HDMI and USB ports. All are aligned perfectly and look good. They have done a good job with the volume and camera rocker, they are not hard to press but does take a little practice to make it smooth. This is a surprisingly nice case and for under $10 you really can't beat it. They are available on Amazon for under $8 plus shipping and available from www.TPU-CASES.com for under $9 with free shipping.
I believe the case for the Motorola Photon 4G from TPU-Cases is an outstanding deal.
Click to expand...
Click to collapse
Gotta say I do not recommend doing that, haha. TPU cases are not the Otterbox Defender. That person just got lucky, it's possible for a 1 foot drop to cause damage or a 10 foot drop to not cause damage depending on how it lands. If anyone could post some pictures of the smoke case on the phone I would be very grateful.
Just got mine today. I uploaded some "customer images" to the Amazon product page and I will follow up there with my full review in about a day or so. So far everything seems great though!
What other colors would you guys like to see done? Lots of XDA members asked me to do matte cases for the Evo 3D but those arent selling very well, not even a 1/10th as well as the high gloss cases are. So I'm reluctant to do it again, but I would be willing to do a few colors.
Got my case today, and here are my initial impressions:
Fit: Very snug, yet easy to put on. All of the "holes" lined up very nicely, including camera, speaker, hmdi/power, and audio.
One thing to notice right away is that the audio port is not covered up by the thickness of the case. When I got my Hero and a case for it, the case was nice and thick, but it was also very right around the jack. When you tried to insert a headphone 3.5mm plug, some of the plugs, especially on over the ear headphones, have a big thick base. Well on the Hero, I could not "sit" the plug all the way in. This case does NOT have this problem. The access/opening is wider than the 3.5mm receptacle and is beveled. Very nice touch.
On the left side the HMDI and power are obvious open (see the pictures below), but the volume rocker and picture button are covered. I'm not a big fan of this, but it does not hamper use of the phone, it is a preference.
The case has a nice shiny gloss to it and looks sharp. I don't know how this gloss look with stand up over time and I might have opted for a mat finish if it were available. I'd also like to see a red color in the mat, as that is my favorite color, but once again, that is preference.
For $7.90 on Amazon, it's a great value and you really can't go wrong with this case.
Here are some pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OneStepAhead said:
What other colors would you guys like to see done? Lots of XDA members asked me to do matte cases for the Evo 3D but those arent selling very well, not even a 1/10th as well as the high gloss cases are. So I'm reluctant to do it again, but I would be willing to do a few colors.
Click to expand...
Click to collapse
Personally I'd like to see blue, something like a royal blue. I ordered the black for now.
Sent from my Photon
TPU-Case
After my vacation I arrived home to find me TPU Case waiting on me. Put it on a first impression is its a great skin case. It wont provide much protection if you drop it but most cases wont unless you get an otterbox. All the holes line up perfect and it is easy to get in out of pocket. Unlike most skins where its tacky like texture to provide better grip but makes getting in and out of pocket hard. This texture is a perfect balance. All and all its well worth the few dollars that this case cost. I would however like to see the power button to be covered like the volume buttons are.
Got mine today and I really like it. As long as I didn't drop it on the face I think it provides plenty of protection and it's still thin enough for me. Still good for getting in and out of the pocket too.
Sent from my Photon
I received my TPU case yesterday and after a day with it I pretty much have the same opinions as everyone stated. It is a very nice case for such a low cost. I think I have a fan of have the volume and camera keys uncovered but to each his/her own though I do think they should all be covered (including the power button) or none at all to keep them uniform. Oh it does not work with the HD dock unless you remove the insert though I have not tested it without the insert to confirm. It offers enough protection for the average user not looking for maximum protection. Overall I am very pleased.
Added my review of the case here.
Also added quite a few images.
TS out
Just ordered the smoke case. I've had the nexus s 4G, htc evo 3d, and photon in the last 4 weeks or so (yeah I know I'm crazy). I'm sticking with the photon though. I've had these tpu cases for both the nexus and 3d and loved them. Actually made me like the phones more somehow. I really like the see through cases that show the back of the phone off. I'm thinking it'd be cool to have clear, red, royal blue and I really liked the smoke geo tpu case too.
Sent from my killer MoPho 4G using Tapatalk
OneStepAhead said:
What other colors would you guys like to see done? Lots of XDA members asked me to do matte cases for the Evo 3D but those arent selling very well, not even a 1/10th as well as the high gloss cases are. So I'm reluctant to do it again, but I would be willing to do a few colors.
Click to expand...
Click to collapse
I just got this phone for my wife and shes a big fan of purple.
Related
Set the stage: I'm not a case fanatic. I used my OG Epic naked for almost 2 years. I do like the style of the EVO LTE and don't feel the need to cover it up. However, coming from the junk-in-the-trunk OG Epic, this thing is THIN and LIGHT. I wanted a case just to add a little bulk, make me a little more comfortable that I won't drop my new baby. And if I do, she'll be a little better protected. I'll probably take the case off in 6 months when its no longer my new baby.
The day before we got our nasty blue silicone case, I ordered two online because I couldn't decide.
UPDATE 5/31 I contacted Diztronic regarding the bulge in the Matte Black case, and got a response quickly. Clay from Diztronic has been extremely helpful and dedicated to making me a happy customer. He has sent a replacement, and I will be sure to update this post with an image of the new case. He assures me that a properly molded case should not look like that, so I trust that maybe a few were bad but most fit properly. I would urge anyone with a concern to contact them. I do not work for them, I honestly knew nothing about them before a few days ago, but now I am a loyal customer simply based on the customer service I've received. I will be recommending them to friends!
First, the Diztronic Matte Black (http://tpu-cases.com/index.php?main_page=product_info&cPath=48_66&products_id=259), $9.99
Saw mention of this elsewhere, but there is a bulge/gap below the kickstand that bugs me, and will probably be a dirt magnet:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Two things about this picture. 1) I was surprised to see the (extremely minor) defect near on the seam on the right side. But 2), I was surprised that the top half of my Matte Black case is shiny!!
The cutout of the bottom microphone, while it doesn't actually cover the hole, seems a bit off:
Flimsy section above the volume rockers:
PROs:
Subtle bump around the camera will protect the lens.
Matte doesn't attract fingerprints.
Subjectively good looks.
Cutouts for all buttons prevent sticking.
Good company & support from what I hear
CONs:
Bulge near kickstand (See update!)
Kind of awkward to push the buttons through the cutouts
Flimsy section near volume rockers
Matte black bottom, shiny top? Little strange (subjective).
Little less grippy than the shiny one.
Second, the el cheapo eBay "Candy" (shiny) black TPU case. There are a number, from a number of different sellers at slightly different prices, but I'd guess they're all the same. The one I got is: http://www.ebay.com/itm/GLOSSY-BLACK-HARD-GEL-SKIN-CASE-COVER-HTC-EVO-4G-LTE-SPRINT-PHONE-ACCESSORY-/270982902775?pt=PDA_Accessories&hash=item3f17d6f3f7#ht_1432wt_1396 ($6.95)
Shiny!
This image is grainy, that's just an artifact of the camera. The case is shiny all over. This one shows the covered-up power button.
Covered-up volume and camera buttons:
PROs:
Covered buttons will provide a little more protection from dust/moisture
Subjectively good looks.
Provides a little more of a rubbery-grippy texture, but doesn't stick to the inside of pockets like silicone.
CONs:
Potential for sticking buttons (Haven't experienced yet)
Two-stage camera button doesn't seem to work
Fingerprint magnet (subject to preference)
As with most things, this is definitely subject to personal preference. I prefer the cheapo shiny one, for a couple reasons. Most of all, I (personally) like the look. I kind of like having to wipe the fingerprint magnet on my pants all the time (really! ). I'm going to use the shiny to start off with. I'll update this thread if I find a reason to switch.
Word to the wise: When removing a TPU case, take it off from the bottom first. Otherwise you will probably inadvertently rip off the top half phone cover for the SD card.
Glad I'm not the only one that had the bulge on the back of the case. I've taken the case off and tried to reposition it over and over again and nothing will fix it.
It bugs me so much that I'm just counting it as a $10 loss and won't be using the case...which is a shame because if it fit properly it would be great.
If mine had that bulge, I'd definitely return it.
Sent from my EVO using Tapatalk 2
funcrusher said:
If mine had that bulge, I'd definitely return it.
Click to expand...
Click to collapse
Surprisingly, I hadn't thought of that. Thanks, I just opened a ticket with them.
bohiti said:
Surprisingly, I hadn't thought of that. Thanks, I just opened a ticket with them.
Click to expand...
Click to collapse
Yeah, I'm going to do the same today.
Got my diztronic TPU case yesterday. There is no bulge below or above kickstand that I can see. I am not a fan of the cutouts, as I inadvertently restarted my phone a couple of times trying to press the power button through the cutouts. The volume cutouts aren't smooth either, and I must say, the phone is less comfortable to hold in hands than the free case Sprint sent out with the phone.
I'm having the re-boot problem when using the diz tpu case. I think what causes it is that the case is so tight at the top, it squeezes the back cover into the power button causing it to stick.
I suppose you could notch the back cover a little bit at the button, but I'm not willing to do that for a case.
I have no re-boot issues when using the ugly sprint case, or with no case at all.
Sorry to hear your having problems with our case. The Diztronic case in your picture is either defective or damaged, our cases don't bulge by the kickstand like that. I have received no reports of that at all so it must be an isolated incident. In the future please contact us if there is a problem as Im not checking XDA as often as I used to. The case is indeed only matte on the back, which is why we call them "Matte Back" cases. It's my feeling that the glossy lip matches the front of the phone. We never have customers return defective cases and do our best to address any issues you guys have, so please email me if there is an issue so I can fix it. It's my opinion that our EVO LTE case is our best case to date, it should be 100% perfect and I've yet to receive even one return request at this point. The case should not affect the power button and hasn't on any of the cases I've tested. I've only received one report of that so far. When contacting us please go through the support ticketing system as XDA messages are not checked as often. Thanks guys!
Sent from my EVO 4G LTE using xda premium
edit: Regarding picture two, all molded TPU cases that I've seen have these, while I don't work in a factory I believe they are known as flash marks from the molding process.
ottodawg said:
I'm having the re-boot problem when using the diz tpu case. I think what causes it is that the case is so tight at the top, it squeezes the back cover into the power button causing it to stick.
I suppose you could notch the back cover a little bit at the button, but I'm not willing to do that for a case.
I have no re-boot issues when using the ugly sprint case, or with no case at all.
Click to expand...
Click to collapse
The case must be defective unless you have some sort if skin on your phone tightening it up. Please contact us for a replacement.
Sent from my EVO using xda premium
OneStepAhead said:
Sorry to hear your having problems with our case. The Diztronic case in your picture is either defective or damaged, our cases don't bulge by the kickstand like that. I have received no reports of that at all so it must be an isolated incident. In the future please contact us if there is a problem as Im not checking XDA as often as I used to. The case is indeed only matte on the back, which is why we call them "Matte Back" cases. It's my feeling that the glossy lip matches the front of the phone. We never have customers return defective cases and do our best to address any issues you guys have, so please email me if there is an issue so I can fix it. It's my opinion that our EVO LTE case is our best case to date, it should be 100% perfect and I've yet to receive even one return request at this point. The case should not affect the power button and hasn't on any of the cases I've tested. I've only received one report of that so far. When contacting us please go through the support ticketing system as XDA messages are not checked as often. Thanks guys!
Sent from my EVO 4G LTE using xda premium
edit: Regarding picture two, all molded TPU cases that I've seen have these, while I don't work in a factory I believe they are known as flash marks from the molding process.
Click to expand...
Click to collapse
Thanks for your reply, I certainly appreciate that your company has people who frequent these forums. I certainly didn't expect an official corporate response or resolution here, we're just talking amongst ourselves regarding our experiences. I did open a support case this morning and have no doubt I will be treated well.
Thanks again!
ya mine has a bulge as well.
I just got my case in the mail today and here my dislikes. I normally like cases with the cut outs but with this phone I'm not liking it. I'm sure the thinness of the phone has something to do with it. The volume and power button just don't feel good to me. The thin rubber strip that runs along the screen just feels too thin and will eventually stretch. But other then that the case looks and feels good. Overall I might keep a eye out for a similar case but without the cut out. BTW the camera cut out feels and looks good.
I've updated the OP with my experiences with Diztronic support. In a word, they're fantastic. Sent a new case in response to the "bulge" concern and really went out of his way to make sure I am satisfied.
BTW my case had no bulge and fits great. It would be nice if they made 2 version one with the cut outs and the other with the buttons covered.
I have the Translucent Black and I love the cutouts. I have had the Diz TPU with covers on my S4GT and EVO 3D and I ended cutting them out because of the added pressure it took to press the buttons. I have the Platinum/ Seidio and it has covers and it is impossible to take a smooth picture because of the added pressure it takes to press the button. I love the cutouts and the Diz TPU. I don't work for them either. lol I have not had the Mat finish but the Black Translucent freaking rocks! IMO
***Edit from original***
As chikoo pointed out in post 12, there is no hole for the secondary mic on top of phone near headset jack (5 tiny pin holes). I did not realize this on my original review. I did end up drilling a small hole to account for this as stated in post 13.
*************************
Just bought my Diztronic case from Amazon for $12.50. I had one of these for my Lumia 900 and loved it, so naturally I bought on for the 920 as well. I've owned everything from Otterboxes, to Casemates, to cheap silicone cases. Cases are very particular to the user, so I'll try to keep this as objective as possible. This case is for the person who wants scratch protection, light drop protection, minimal bulk, and a raised front edge so the glass doesn't touch if laid front face down on a table.
DIZTRONIC TPU Case on Amazon
Pros:
1. Perfectly snug fit. Feels like it is part of the phone. Doesn't feel loose at all.
2. Pleasant matte texture. It really feels nice in your hand. Provides a soft grip without being excessive.
3. Can no longer feel heat of phone. The is a BIG plus. The 920 can really get warm sometimes, but that is pretty much a non-factor now.
4. Light weight and minimum bulk. The effectively adds nothing to the heft of the 920.
5. Power button opening is great reference for no-look operation. Works perfectly too, even for my big fingers. I really like how it is recessed.
6. Value priced.
7. No fingerprints. It is really a dark gray color (slightly lighter than phone case). Looks great imo. The pictures below show it slightly lighter than actual due to the flash though. Overall, looks sharp.
8. Full access to all ports with all adapters.
9. Wireless charging still works!
Cons:
1. Very slight visual gap on front on top and bottom of gorilla glass. Not a factor for me because I have a black phone and black case. But this could potentially cause be a negative if you have different color case than phone. They do come in black, cyan, red and yellow though. The sides don't have this gap. I imagine they may have done this to provide enough space to slide the phone in when installing.
2. Volume button and camera button are less pronounced than without case. Not really a negative or a positive, but I put it on the con side because it is slightly more difficult to feel. They are raised, but less obvious than without case. The operation is perfect, but I'm less sure of when I'm on the volume up or down.
3. The 4 corners actually had a mold seam, even though the website said it doesn't. It was an ever so slight edge on all 4 corners. The only reason I noticed it is because the rest of the phone is so soft. No problem though, I took some 1000 grit sandpaper and smoothed it out. Very nice now.
The pictures show the case slightly lighter than real life due to camera flash, but it is a shade lighter than the phone case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Website description:
Matte Back Black Flexible TPU Case by Diztronic
Slip your Nokia Lumia 920 into this custom fit Matte Back Black TPU Case by Diztronic and experience the peace of mind of knowing your investment is well protected. Flexible, yet stronger and more durable than silicone, TPU offers excellent shock absorption and abrasion resistance while maintaining a thin form factor. The raised wrap-around edges make for a "lay-on-the-table" design that helps protect the glass screen from damage. Easy to install and remove, and definitely affordable--why not build a changeable wardrobe for your phone?
This case fits the following models:
Nokia Lumia 920 (All Carriers)
This case will not fit the older Lumia 900 model.
Features:
Made of Durable, Flexible TPU Material
Matte Back Prevents Fingerprints - High Gloss TPU Frames the Display
New Matte Back Rev2 Design! No Bothersome Molding Seam!
Solid Protection from Drops and Scratches Protects Your Investment
Shields Phone From Damaging UV Light
Excellent Impact & Abrasion Resistance
Stronger, Tougher Case Solution than Silicone
Lay-On-The-Table Design Helps Protect Glass Screen from Damage when Placed Face Down
Ultra Thin - Only 1.44mm!
Precise Cutouts Gives Full Access to all Ports
DIZTRONIC Website
Thanks for the post I've had issues finding a good case just ordered the red one
I think you will like it... I know I do. I was very nit-picky with the review, but I highly recommend it if it suits your needs. No regrets for me.
Thank you
smuook said:
I think you will like it... I know I do. I was very nit-picky with the review, but I highly recommend it if it suits your needs. No regrets for me.
Click to expand...
Click to collapse
Thanks for the recommendation. Just order one black and one red.
I am also a big fan of their cases, Had one for my Galaxy Nexus and it was great. I will probably still get an Otterbox Commuter when that comes out as well to switch between them depending on what I am doing.
got mine in the mail today. i ordered one after reading your review. thanks for taking the time out to write this up. its a great case
maz0 said:
got mine in the mail today. i ordered one after reading your review. thanks for taking the time out to write this up. its a great case
Click to expand...
Click to collapse
You are welcome.
Is this similar in quality to the included Nokia case that comes with the Lumia 800?
I had a diztronic TPU case for my HTC Vivid. It fit like a glove and made the phone look/feel even better.
wheresmybeaver said:
Is this similar in quality to the included Nokia case that comes with the Lumia 800?
Click to expand...
Click to collapse
Don't know.
Great Review
smuook said:
I think you will like it... I know I do. I was very nit-picky with the review, but I highly recommend it if it suits your needs. No regrets for me.
Click to expand...
Click to collapse
thank you , i just ordered the red one.
ps : great review and really deep through for personl experience
I ordered and got one. Beautiful construction. But I am returning it because it has no opening for the secondary microphone that is near the earplug.
Wow, you are right. Didn't even know it was there. I guess it must be for noise reduction or something. Anywho, decided to use my dremel on low speed and make my own hole. Thanks for pointing this out.
smuook said:
Wow, you are right. Didn't even know it was there. I guess it must be for noise reduction or something. Anywho, decided to use my dremel on low speed and make my own hole. Thanks for pointing this out.
Click to expand...
Click to collapse
what tip did you use?
I have the Kawasaki version of a dremel tool. It comes with drill bits and I used the 1/8" bit. You have to take your time and line it up. It will end up very close to the headphone jack hole. I got it pretty darn close to lining up with the mic (good enough for me). I probably could have been a little closer to the other hole, but I was afraid to get too close. I recommend starting it by hand. Just twist the bit in for a few minutes to get it started where you want it. Then I used the tool on the slowest speed and finished it off. I am actually pretty pleased with the way it turned out... looks like it was made that way to me.
Note: I hope this is obviously, but I drilled it with the case off the phone. I lined it up as best I could and marked it first.
I should not be on xda if I drill the case with phone inside it... ?
Sent from my Lumia 920 using Board Express
I contacted Diztronic about this and here's the reply:
A Diztronic customer support staff member has replied to your support request, #4532 with the following response:
Yes, I just became aware of it last night as well. We already pulled the cases from our website and eBay. The problem is Amazon is still sitting on a bunch of inventory at their warehouse, and to have it destroyed id quite costly. They charge $1.50 a piece just to discard inventory! Considering it's taken over 3 weeks for anyone to notice this, I have to wonder how much a problem it really is. It doesn't appear to be negatively effecting the sound quality in a noticeable manner, or at least no ones reported that. I'll probably end up discounting what inventory is left at the Amazon warehouse and put up a disclaimer about the noise cancellation hole.
Since the Lumia 920 has really tanked for us, I don't see us making a 2nd revision. We will extend our return policy on the Lumia 920 cases for any customer who would like to return them due to this issue. My apologies for the inconvenience, the noise cancellation mic wasn't on the dummy phone we acquired. From what I've seen, many other manufacturers missed this hole as well.
Click to expand...
Click to collapse
That is sad. This is a fantastic case in all other ways. The dremel idea worked for me.
Sent from my Lumia 920 using Board Express
Surprising we don't have thread like this for DNA yet.
So its simple. Post photos of your cases, pouches, flip covers, skins with the DNA and also please do post the source / link from where you got it so it can help others to buy the same if they like it.
Cheers! Will post mine soon.
From my Note 2, right in your face....
I need people to post pics so i can get case ideas....
I'll bite.
This is the Incipio Feather Case.
I paid $23, from DayDeal.com. You can find it on Amazon and, for a little less, on eBay. I was able to drive to DayDeal and pick it up, so I saved shipping charges, and didn't have to wait (I can be very patient, as long as I don't have to wait). DayDeal has also treated me very well in the past, so I'm happy to give them my business, even if it costs me a few bucks.
Comes in Gray, Black, Hot Pink and Blue.
If you're looking for the thinnest, lightest case other then simply putting stickers on the back of your DNA, this case is probably it.
I'm not really sure how much protection it'll provide. I do have another case, which I used when I was on a recent trip skiing, but for day to day use, I really like this case! It retains the sleek look and feel of the DNA, even retaining the curved shape of the back of the DNA. Soft touch paint provides a more firm grip in your hand, something that was lacking in the similar Nillkin case I have. I purchased the smooth Nillkin case (they do have one with dots on the back, but I didn't care for how it looks), and always felt like it was about to slip out of my fingers (came close a couple of times)... the Feather case has no such problems!
If you're looking for a case which you can drop your DNA on concrete, and not flinch, this ain't it!
If you're looking to keep your DNA slim and light, while providing some additional protection, especially from scratches to the back... you may want to give this one a look.
Positives:
Soft touch paint
Ultra thin
lightweight
Displays red highlights of the DNA
Inductive charging works fine with case
Negatives:
Top and bottom edges partially exposed
Doesn't provide maximum protection
Power and volume buttons exposed
Back LED concealed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice I'm going to look for that incipio case ASAP but here's my case mate case bought from a Verizon store in NH
Pics we're taken with my retired Gnex
Sent from my HTC6435LVW using xda app-developers app
I have a couple. A standard case with a built in stand. It came with a holster, which i would never use. Purchased directly from Verizon corporate store. It has a nice design that aids in gripping the phone.
Not too much of a lip
I like how designers gave the user a little extra room past the vol up and vol dn rocker
Corner protection leaves much to be desired
Is everyone's flap chipping away like mine? I had to let a fingernail grow out just to pop this thing out
Here's how the back looks with the stand pulled out
Then there is the Otter Box, again purchased from the Verizon store.
The standard 3-piece fare
Finally, fully clothed
This is what I am bummed about.
Lot of nice looking cases, but most dont have cutout for the back notification light
Those that do have it, all look like crap.
Funkym0nkey said:
This is what I am bummed about.
Lot of nice looking cases, but most dont have cutout for the back notification light
Those that do have it, all look like crap.
Click to expand...
Click to collapse
A little quick work with a drill and that can be solved.
My Trident Aegis case has a cutout in the back for the light.
Got the Incipio dual case, ordered direct from Incipio to get the color combo. Was a little worried about grey/electric green with the employee edition red but in natural light it actually looks pretty cool. You can only see it from the back or looking up at the charging port area. I work for VZW so I'm hoping we'll starting carrying these for the DNA like we do for all the other phones so I can pick up a black/black with my discount.
It adds just a bit of bulk, the soft touch is very nice (similar to the feather the guy further up has) The power button is a lot easier now as well. The case tapers with the phone so it still has that nice feel in the hand, just a bit thicker.
Ballistic HTC Droid DNA SG MAXX
White/clear TPU case from eBay on Employee Edition DROID DNA.
Posted from my Verizon Employee Edition DROID DNA #01749.
Poetic Atmosphere Case for HTC Droid DNA
I bought the Poetic Atmosphere Case for HTC Droid DNA from Amazon for $7 and just received it today. It is a really nice case and fits the DNA perfectly. It adds almost no bulk to the DNA while providing average protection for daily use. The Poetic case also accommodates the rear LED notification light. The back of the case is transparent and a bit slippery while the sides are gray. There are raised buttons for the power and volume buttons. Pictures are available on Amazon. Here is the info from Amazon:
Made of polycarbonate and thermoplastic polyurethane
Transparent durable material
Grey borders surround the edges
Customer built-in volume control buttons
Raised knobs on each corner to protect from surface scratches.
Comparing it to the Ballistic SG Case that I'm currently using, It is a much sleeker case, but the Ballistic SG Case offers more protection at the expense of more bulk. The Ballistic SG Case seems to be squeezing the DNA a bit too tightly and might be causing the bluish splotches on the DNA screen. However, I do feel more at ease if the DNA is in the Ballistic case than the Poetic case. I'll post pictures later when I get a chance.
Just did a review of my DNA with the Incipio Faxion. Thread below.
http://forum.xda-developers.com/showthread.php?t=2087153
Incipio Faxion
Sent from my Droid DNA
Picked up a Nillkin hard case for ten bucks off eBay. Usually go for more protection, but this one's done a good job so far. I also didn't want something that put a stack of pressure on the sides of the phone:
Well worth the ten bucks, the included screen protector goes well also.
http://www.ebay.com.au/itm/Nillkin-...AU_MobilePhoneAccessories&hash=item3a7cb95a60
juzz86 said:
Picked up a Nillkin hard case for ten bucks off eBay. Usually go for more protection, but this one's done a good job so far. I also didn't want something that put a stack of pressure on the sides of the phone:
SNIP
Well worth the ten bucks, the included screen protector goes well also.
http://www.ebay.com.au/itm/Nillkin-...AU_MobilePhoneAccessories&hash=item3a7cb95a60
Click to expand...
Click to collapse
Have this case, I like its slim profile.
Seems like you placed the screen protector a tad low, no lifted edges on mine.
Verean said:
Seems like you placed the screen protector a tad low, no lifted edges on mine.
Click to expand...
Click to collapse
Yeah, in a rush
crikeycrapper said:
I bought the Poetic Atmosphere Case for HTC Droid DNA from Amazon for $7 and just received it today. It is a really nice case and fits the DNA perfectly. It adds almost no bulk to the DNA while providing average protection for daily use. The Poetic case also accommodates the rear LED notification light. The back of the case is transparent and a bit slippery while the sides are gray. There are raised buttons for the power and volume buttons. Pictures are available on Amazon. Here is the info from Amazon:
Made of polycarbonate and thermoplastic polyurethane
Transparent durable material
Grey borders surround the edges
Customer built-in volume control buttons
Raised knobs on each corner to protect from surface scratches.
Comparing it to the Ballistic SG Case that I'm currently using, It is a much sleeker case, but the Ballistic SG Case offers more protection at the expense of more bulk. The Ballistic SG Case seems to be squeezing the DNA a bit too tightly and might be causing the bluish splotches on the DNA screen. However, I do feel more at ease if the DNA is in the Ballistic case than the Poetic case. I'll post pictures later when I get a chance.
Click to expand...
Click to collapse
Had the poetic case...it's nice...but it eventually broke on me. The back of the case started to detach from the sides. I'm by no means rough with my phone so it didnt take much for it to come apart.
mmmboba said:
Had the poetic case...it's nice...but it eventually broke on me. The back of the case started to detach from the sides. I'm by no means rough with my phone so it didnt take much for it to come apart.
Click to expand...
Click to collapse
Yikes. That's not good news. Did you get a replacement? Poetic seems to be giving a 3 year warranty for it.
juzz86 said:
Picked up a Nillkin hard case for ten bucks off eBay. Usually go for more protection, but this one's done a good job so far. I also didn't want something that put a stack of pressure on the sides of the phone:
Well worth the ten bucks, the included screen protector goes well also.
http://www.ebay.com.au/itm/Nillkin-...AU_MobilePhoneAccessories&hash=item3a7cb95a60
Click to expand...
Click to collapse
What camera was used to take the pictures? really clean shots
osmosizzz said:
What camera was used to take the pictures? really clean shots
Click to expand...
Click to collapse
Canon EOS 1100D man, stock 18-55 lens :good:
Ahhhhh Relief. I FINALLY have a case for my note 3. I was dreading every day knowing I had no case yet for my baby not it has some armor and I feel much better.
Bonus? this armor is amazing. I have to say kudo's to UAG they keep improving the cases. they take the customer issues and feedback and they incorporate it into future designs.
lets have a look at this beauty before we continue.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On my screen this is a very good representation of the actual color of the case. Some of my other pictures come out a little "more" orange (which I would have liked) but its still orange enough to keep me happy (I prefer Retina Burning colors
They selected a very good orange for this case. not too "outlandish" but still pleasingly bright and orange.
They have improved several key area's of the case. More ribbing inside to more firmly meld with the shape of the phone. The buttons tended to be a little mushy. We the customer learned if we "sliced" it a little along each button it freed them up nicely. they have fully incorporated this concept in the new case and the buttons are now like "butter"
I am not joking when I say the buttons feel "better" with the UAG case on than they do naked" its easier to find them and they for some strange reason seem to "press" better. its very strange. I have never had a case "improve" on the function of the phone this way before. My guess is samsung just make them too small and slipper and the case design of the UAG corrects this.
if button depression is a sticking point for you then you will NOT be displeased with the UAG.
I also love that they went back to the original design. I did NOT like the new design for the Note II case. it was ugly enough to me that I never even bought one for my Note II so very happy to see the return of this design.
Some more interior shots of the cut outs and buttons and patterning.
The UAG is a medium duty design case with some features that push it upwards to inbetween medium duty and heavy duty.
Some of these are the ridges on the backside which also act to protect the case itself from marring when you set it down.
its a two part "melded" construction. the black is TPU which is a "stiff" rubber like compound (thermo plastic) this provides your "shock" protection (dropping it) and then it has a Poly Carbonate component (the orange part) that gives you rigidity and IMPACT/Penetration protection. (something hitting the phone)
the phone has as much impact protection as a "heavy duty" case but not as much "shock" protection (rubber thickness) as a heavy duty case like for example a caseology hybrid rugged or a AMS Kraken from trident or a zero shock from zero lemon. its a trade off of amount of protection and how "LARGE" you want the phone to become.
a full on HD Ruggedized case will DOUBLE the size of your phone. minimum. when your out in the woods you might need that kind of protection. if your more careful around home you don't really need that kind of protection.
there are 2 methods of typical damage to a phone. something hits the screen directly or the corner is impacted.
this is where the UAG moves to inbetween medium duty and heavy duty.
the corners on the UAG case are not form fitting. they are "larger" than the stock corners to provide extra shock protection at this critical point of impact. I have no doubt you could drop this phone from 6ft onto a corner and not worry about any damage to the phone. (No I won't be testing that on my $550 phone
Last Interior shot
Another welcome improvement is more frontal encasement. its quite difficult to install and even more difficult to remove the phone from this case.
Mind you this is a good thing. the harder it is to install and remove is a very good indicator of how well designed the case is to retain the phone.
the front opening is smaller now. so the phone does not FIT through the front. you need to distort the case quite a bit to shoe horn the phone into it. VERY welcome upgrade! this case will NOT release this phone easily on its own.
the phone is also more recessed into the case! big big improvement. this is important for when you set the phone down on its face (to protect the face) if its too close to the surface you set it down onto things can scratch or impact the screen.
they have thickened this up so you now have a bit over 2mm of screen depression distance. In this picture you can see its thicker than a nickle which is 1.95mm
Of course same as before and one of the larger benefits of a case is it depresses the camera lens nicely. preventing it from touch anything when the phone is set down or put inside anything and also reducing the chances if you putting your finger on it when you grab/extract/slide the phone putting finger prints on it marring your videos.
this portion of the case is around 3mm thick and you end up with a bit over 2mm of depth protection (the camera lens led unit of the Note 3 protrudes out of the phone about 1 mm)
Lets do a walk around of the outside of the case.
At the bottom you have very nice clean cutouts for the Speaker and Microphone access holes. excellent precision cuts here.
The Stylus cut out is also precise and nicely spacious giving you easy unrestricted access to remove the stylus.
The USB jack cut out is also very nice and more spacious than before! this is fantastic so if you have a "larger" than typical plug you won't have a problem with the case cut out interfering with insertion of the plug.
My skinny mSD OTG adapter fits fine. I don't have my Meenova adapter handy I will update this review once I have it although I do not anticipate a fitment issue.
at the top we have headphone and microphone cut outs. the headphone jack looks to be large enough to encompass "big head" plugs without a problem and the other cut out is your IR Emitter.
On the sides we have the volume rocker
and opposite the power button
I like the new hex pattern sides. while I did not have a grip problem with the old design IT WAS a wee slippery feeling. Now it feels very nice. no slip concerns.
Close up of the back of the phone with design and UAG logo details
They even thought to increase the spacing for the proximity and light sensors to prevent interference and false readings
And how it fits in the hand (of note I have VERY large hands) I can completely cover the phone with my hand.
This case is more difficult to install and remove than the original. this is a good thing. more secure. its quite easy once you know how
Start by inserting one long side of the phone
than using your thumb push the bottom opposing corner of the phone into the case pulling the case down and pushing the phone "up" at the same time till it snaps into place
work UP the remaining side snapping it into place until its all in. You can do this one handed (see video below)
Removal is a little trickier. Push one corner off then work your way down to the other corner and pull the phone out. (again see video you can do this one handed)
Some video's of the case and a video of installation and removal of the case
Install and Remove the UAG Note III Case
https://www.youtube.com/watch?v=wTOy1pGHiIs
Walk around of the case in 4k!
https://www.youtube.com/watch?v=JcCRp0vN1w4
Nice review bro. I just ordered the Scout. Did the miss the hole on the bottom right of phone. Not sure if it's a mic or what but I do know they had a batch go out b4 they realized.
My Note3 is locked but my XDm45 is loaded.
---------- Post added at 08:40 PM ---------- Previous post was at 08:36 PM ----------
Haha. Never mind you answered that in video.
My Note3 is locked but my XDm45 is loaded.
They have always had the slits under the power and volume keys. Or at least on the s3,s4. If they don't have it it's cuz they're fakes.
Sent from my SM-N900T using xda app-developers app
nope. no slits on the multiple S3 case I had. I added them myself with an exacto knife and I bought them direct from UAG not third party. Their was a whole thread here on XDA about it and that thread is where I got the idea from to use an xacto blade to slide the slit.
they offered to send a replacement immediately but I said no worries as it was a super easy fix. I did order early so maybe it was a bad batch or early batch or something.
I'm just until opposite of you. I really like their Note 2 case which gave you the ability to change the color combination. Since they did away with that design for their Note 3 case I haven't even given it a second look, until looking at your pics. I still don't like their Note 3 case. Also, it looks bulkier than their Note 2 case, is it? I just think the Note 3 looks too nice to bury in a case like this, my opinion of course. I never drop my phones anyway, so my clear Diztronic TPU covers my needs while still allowing my go see my phone. I'm also still shocked that UAG covered the temp sensor hole, and even called it a "mystery hole"!! Really UAG, a mystery hole?!?! Must suck not having access to the internet!! Lolol
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
not me. hated the note II design also hated I could not get it in orange. only black and white my two most disliked phone colors. now if the OUTSIDE was orange (instead of the nearly invisible tiny insert) I might have gotten it even though I don't like the design.
man was I excited when I heard they were so rapidly coming out with a Note II case (I waited so long for the S3 case) that when it popped up my first instant reaction was ..... YUCK ..... but ahhh I guess I could deal with it in orange and then I found out NO ORANGE !! only white and black.. Double Yuck hehehe
the case is very slim. it adds very little bulk to the phone in either case.
I really love the industrial rugged military like design of the S3 and this Note 3 case. I guess I am just partial to that kind of styling.
I can see people liking the Note II case. a lot of people did like it! so your not alone!
meh. the temp/hygro hole was irrelevant. I actually wish I got one without the hole. it won't effect the readings from the sensor and is just one more hole for dirt to get into. I might even fill that hole in.
YO UAG !! how about some CLEAR loving for the Note 3
freaking teasing me with that clear case then only releasing it for the icrap !! no fair
clear would be pretty slick. using vinyl skins you could "change up" often with the same case!
I see the hole in the second last pic. Thanks!
Excellent write up! Thank you @nerys71 for the extra inspiration to get my own.
Sent from above.
no problem. I really love their cases.
Oh I so dream of a UAG case for the Zero Lemon battery
when you hold our device in landscape mode where is your home button? left or right side of the screen?
i got this case too and absolutely love it. however i did notice a small detail today that UAG probably didnt consider. Most users hold the device in landscape mode with the home button on the right side... in doing so the UAG logo on the rear is upside down. looks like the brand is GEN... It should have probably been designed so that its right side up when in landscape mode.
as I said most users hold it this way, some might use the home button on the left tho...
hmmm poll anyone? lol
I'd say you are on the wrong side of the phone if you are looking at the uag logo
Sent from my SM-N900V using Tapatalk
nyjumpman said:
I'd say you are on the wrong side of the phone if you are looking at the uag logo
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
ha, so that's why my touchscreen wasnt working correctly and looked a little orange....
it was just an observation
I really like orange and how this case looks. However I pretty much require a holster or something of the sort.
Sent from my SM-N900T using Tapatalk
should not be hard to find/mod/make a holster for it. IE maybe a slip grip?
Hi Gang,
I tried submitting this to Supcase itself on the product page of their website, but they have reCaptcha issues, I couldn't so it - So I was able to submit to them via the form for contacting them, which didn't have the same issue.
I figured that it could also be used here. Link to product (get through Amazon though, cheaper) and review I typed up:
http://www.supcase.com/google-nexus-6-unicorn-beetle-clear-bumper-protective-case.html
"New Nexus 6, and wanted a good looking case to go with it. Over at XDA Developers, the discussion drifted towards several, however the Supcase Hybrid jumped out at a lot of us besides myself.
I cannot speak to actual protection, nor do I really want to find out, however the case arrived 1 day before the phone, and my thoughts follow after 2 days of use (I have the Frosted Black):
Awesome aesthetics! - From the bevels on the front edges of the lips at the screen edge to the overall looks and integration of the outer PC ring to the TPU shell, it just looks fantastic. It doesn't, in my opinion, add any real size to the phone itself. The ridges give it some grip, and the TPU seems to be grippy enough for me (especially if you have a little sweat as you are getting used to handling this beast).
The cutouts work well, I only noticed a slight misalignment of the microphone hole on the back, that could be just due to the phone, or manufacturing, but overall it is not a deal breaker, enough of it is there to make it only noticeable as if one is writing a review, in operation no one would be able to tell (there are those who would just drill it out a bit and issue solved, I don't feel it necessary.)
Having the dimple for the Motorola symbol and the camera cutout make great reference points for using your hand holding it if not taking a pic/video, the phone is well balanced and once you have had it a couple of days you know what you can and shouldn't do with it in that regard. (I use Voice to text a lot, so I do not feel the urge to do one handed typing).
The power button and volume rocker are tight - in a good way - meaning you definitely have a solid feel to both. While others feel that the power button should have a different feel, or ridges on it to separate it from the rocker, my feeling on this is that for this phone, you only have the power and volume rocker, is it really that hard to know what you have slid your finger onto? (Realistically I would have preferred if Moto had placed the volume rocker on the other side as like my old Galaxy Nexus, that accomplished separation, plus if Supcase had made one like this for that phone, each side would lend to give leverage to the other when pressing, I'm saying those buttons are solid, and that's what you want.
I chose the frosted over the black/black, because I want to see the nexus logo, and they didn't disappoint, the phone I have is blue however the frosted areas give it a grey tone even in direct sunlight, and it complements the black outer PC ring. Outstanding.
The only negativity I can find is that on my unit after two days, the upper PC lip seems to be slightly "up" from the phone, this is, I feel, due to me having taken the case off a couple of times, my method was to push te top of the screen up and then corners over to then slide off, it may be that it should be set and forget, but this is not a deal breaker either, it has to give a bit to get onto and off the phone, but it is on, and on good, it's not going anywhere.
That's it for my review - If you want a minimal case to use with the phone that looks great, this is the one to get, as stated I cant say how well it would protect your phone, I've only dropped a phone once, and don't want to try this one, but for the cost they offer for it, you get every penny."
Marc
Nice ?
This is my favorite case so far on this phone. I use the clear one on my white N6 and it looks awesome.
Now if only someone had pics of the red one (cant find anything online). And if only someone had pictures of any color with carbon fiber skin showing through.
bob2300nx said:
Now if only someone had pics of the red one (cant find anything online). And if only someone had pictures of any color with carbon fiber skin showing through.
Click to expand...
Click to collapse
I don't have pictures of red one, but my buddy bought exactly the same case for his Note 4, red one, and... well... in reality it looks more pinkish than redish... long story short, he went back to his old case after a week because of the color.
pony182 said:
I don't have pictures of red one, but my buddy bought exactly the same case for his Note 4, red one, and... well... in reality it looks more pinkish than redish... long story short, he went back to his old case after a week because of the color.
Click to expand...
Click to collapse
Thats what I was afraid of based off of the stock pictures. Thanks
Wow that is a very nice case, as far as the slimmest case that still offers protection. You guys think there's anything else competitive? Like a silicone one that fits really well?
p3dr0maz said:
Wow that is a very nice case, as far as the slimmest case that still offers protection. You guys think there's anything else competitive? Like a silicone one that fits really well?
Click to expand...
Click to collapse
The Spigen tpu air bumper case would be what your looking for. The supcase is nicer though still.
Thx for the fast response. Those were nice but I wanted skinnier. I ordered Ringke slim gunmetal. Ok, no? It's not for major drop protection I mainly just want to minimize case scratches.
bill3508 said:
The Spigen tpu air bumper case would be what your looking for. The supcase is nicer though still.
Click to expand...
Click to collapse
For the people who want to see how this case looks with a skin -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not the best pics but give a pretty good idea what the skin looks behind the case. Hope this helps!
RW-1 said:
If you want a minimal case to use with the phone that looks great, this is the one to get
Click to expand...
Click to collapse
I saw this case and immediately ordered it. It'll get here before my N6 will . :crying:
I'm kind of a case whore though, and will probably buy several others before all is said and done. With my Nexus 5, I had 13 cases. Nice little review, thanks.
Ordered on Saturday, received it today. Love Amazon 1 day shipping (was actually free for me on Prime).
First impressions, it is a really nice premium case. It feels good in the hands, buttons are nice to press on (not as nice as Ringke Fusion but better than Spigen Ultra Hybrid). Doesn't add much bulk, plays nice with my tempered glass protector, cutouts are perfect. The dimple is properly aligned with the case. So far I'm pretty impressed and this is probably the best case in my opinion that shows off the back of the phone.
The camera cutout could be further in but is deep enough to withstand a drop if the phone was to be dropped. The phone with the case inside feel good in the hands.
zephiK said:
Ordered on Saturday, received it today. Love Amazon 1 day shipping (was actually free for me on Prime).
Click to expand...
Click to collapse
Yea same here, kind of surprising, had never seen free one day shipping before. But ordered yesterday and got it today.
So far, love it. I also ordered a ringke slim and a spigen slim armor. The ringke is easily the smallest case as it is really slim, but it also feels like a cheapish piece of plastic. The spigen was good, but a little bit hefty and the buttons on it were terrible.
This is inbetween in size. Small enough that the added bulk doesn't make the phone seem too big, but enough to feel it offers some food protection. It feels good in the hand and looks great. The buttons are a bit stuff but pretty good.
The only real downside is the small microphone? hole near the bottom of the back is slightly misaligned, as the op said.
Can you guys please compare to the ringe fusion?
Also interested in the difference in bulk between this and the fusion
Supcase feels a little thicker but I think its more that the material is harder. It definitely feels slightly bulkier than the fusion.
Just received mine. First case for my nexus as I just received it today too but damn does it feel good. Buttons feel nice and love the clear back to show off the white. Deff slim and love the way its perfectly designed for the nexus with the indent on the back.
I have the PRO SERIES an man is it good! I've had it on since a week after I got the phone. Only complaint is the camera hole is to long (all the way to the Moto symbol). But the protection is there, feel is good, grip is excellent, all cutouts are lined up great! Add the fact that our N6's are water resistant! I'm feeling safe!
Dachank said:
Also interested in the difference in bulk between this and the fusion
Click to expand...
Click to collapse
There's a difference, but it's not a bad difference. It's bulkier than the Fusion but still very much slim and easy to hold in 1 hand.
bob2300nx said:
Can you guys please compare to the ringe fusion?
Click to expand...
Click to collapse
Major comparisons:
1. Buttons on the Ringke Fusion is a lot better, it's clicky. But by no means that the Supcase buttons are bad, they're actually pretty good and nice to press but Fusion is clicky.
2. The Ringke Fusion back is prone to scratches very easily and depending on what color you get. Crystal View may become "yellowish" over time.
3. The dust covers aren't on the Supcase which is a ++++. Yeah you can cut it off but that's kinda cheap.
4. The Nexus 6 "dimple" is present on the Supcase which is really cool, makes the N6 easier to hold on.
5. Supcase has more grip and feels better in the hands. It is slightly more bulky but doesn't add much bulk when compared to a Spigen Slim Armor or something. Very easy to type with one hand and hold with excellent grip.
I love the look of this case (always have) but I'm concerned with the amount of protection it provides vs the Diztronic Ultra I ended up buying on release back at the end of Nov or beginning of Dec (whenever it came out.. Can't remember).