Nexus 6 - unicorn beetle hybrid protective bumper case review - Nexus 6 Accessories

Hi Gang,
I tried submitting this to Supcase itself on the product page of their website, but they have reCaptcha issues, I couldn't so it - So I was able to submit to them via the form for contacting them, which didn't have the same issue.
I figured that it could also be used here. Link to product (get through Amazon though, cheaper) and review I typed up:
http://www.supcase.com/google-nexus-6-unicorn-beetle-clear-bumper-protective-case.html
"New Nexus 6, and wanted a good looking case to go with it. Over at XDA Developers, the discussion drifted towards several, however the Supcase Hybrid jumped out at a lot of us besides myself.
I cannot speak to actual protection, nor do I really want to find out, however the case arrived 1 day before the phone, and my thoughts follow after 2 days of use (I have the Frosted Black):
Awesome aesthetics! - From the bevels on the front edges of the lips at the screen edge to the overall looks and integration of the outer PC ring to the TPU shell, it just looks fantastic. It doesn't, in my opinion, add any real size to the phone itself. The ridges give it some grip, and the TPU seems to be grippy enough for me (especially if you have a little sweat as you are getting used to handling this beast).
The cutouts work well, I only noticed a slight misalignment of the microphone hole on the back, that could be just due to the phone, or manufacturing, but overall it is not a deal breaker, enough of it is there to make it only noticeable as if one is writing a review, in operation no one would be able to tell (there are those who would just drill it out a bit and issue solved, I don't feel it necessary.)
Having the dimple for the Motorola symbol and the camera cutout make great reference points for using your hand holding it if not taking a pic/video, the phone is well balanced and once you have had it a couple of days you know what you can and shouldn't do with it in that regard. (I use Voice to text a lot, so I do not feel the urge to do one handed typing).
The power button and volume rocker are tight - in a good way - meaning you definitely have a solid feel to both. While others feel that the power button should have a different feel, or ridges on it to separate it from the rocker, my feeling on this is that for this phone, you only have the power and volume rocker, is it really that hard to know what you have slid your finger onto? (Realistically I would have preferred if Moto had placed the volume rocker on the other side as like my old Galaxy Nexus, that accomplished separation, plus if Supcase had made one like this for that phone, each side would lend to give leverage to the other when pressing, I'm saying those buttons are solid, and that's what you want.
I chose the frosted over the black/black, because I want to see the nexus logo, and they didn't disappoint, the phone I have is blue however the frosted areas give it a grey tone even in direct sunlight, and it complements the black outer PC ring. Outstanding.
The only negativity I can find is that on my unit after two days, the upper PC lip seems to be slightly "up" from the phone, this is, I feel, due to me having taken the case off a couple of times, my method was to push te top of the screen up and then corners over to then slide off, it may be that it should be set and forget, but this is not a deal breaker either, it has to give a bit to get onto and off the phone, but it is on, and on good, it's not going anywhere.
That's it for my review - If you want a minimal case to use with the phone that looks great, this is the one to get, as stated I cant say how well it would protect your phone, I've only dropped a phone once, and don't want to try this one, but for the cost they offer for it, you get every penny."
Marc

Nice ?

This is my favorite case so far on this phone. I use the clear one on my white N6 and it looks awesome.

Now if only someone had pics of the red one (cant find anything online). And if only someone had pictures of any color with carbon fiber skin showing through.

bob2300nx said:
Now if only someone had pics of the red one (cant find anything online). And if only someone had pictures of any color with carbon fiber skin showing through.
Click to expand...
Click to collapse
I don't have pictures of red one, but my buddy bought exactly the same case for his Note 4, red one, and... well... in reality it looks more pinkish than redish... long story short, he went back to his old case after a week because of the color.

pony182 said:
I don't have pictures of red one, but my buddy bought exactly the same case for his Note 4, red one, and... well... in reality it looks more pinkish than redish... long story short, he went back to his old case after a week because of the color.
Click to expand...
Click to collapse
Thats what I was afraid of based off of the stock pictures. Thanks

Wow that is a very nice case, as far as the slimmest case that still offers protection. You guys think there's anything else competitive? Like a silicone one that fits really well?

p3dr0maz said:
Wow that is a very nice case, as far as the slimmest case that still offers protection. You guys think there's anything else competitive? Like a silicone one that fits really well?
Click to expand...
Click to collapse
The Spigen tpu air bumper case would be what your looking for. The supcase is nicer though still.

Thx for the fast response. Those were nice but I wanted skinnier. I ordered Ringke slim gunmetal. Ok, no? It's not for major drop protection I mainly just want to minimize case scratches.
bill3508 said:
The Spigen tpu air bumper case would be what your looking for. The supcase is nicer though still.
Click to expand...
Click to collapse

For the people who want to see how this case looks with a skin -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not the best pics but give a pretty good idea what the skin looks behind the case. Hope this helps!

RW-1 said:
If you want a minimal case to use with the phone that looks great, this is the one to get
Click to expand...
Click to collapse
I saw this case and immediately ordered it. It'll get here before my N6 will . :crying:
I'm kind of a case whore though, and will probably buy several others before all is said and done. With my Nexus 5, I had 13 cases. Nice little review, thanks.

Ordered on Saturday, received it today. Love Amazon 1 day shipping (was actually free for me on Prime).
First impressions, it is a really nice premium case. It feels good in the hands, buttons are nice to press on (not as nice as Ringke Fusion but better than Spigen Ultra Hybrid). Doesn't add much bulk, plays nice with my tempered glass protector, cutouts are perfect. The dimple is properly aligned with the case. So far I'm pretty impressed and this is probably the best case in my opinion that shows off the back of the phone.
The camera cutout could be further in but is deep enough to withstand a drop if the phone was to be dropped. The phone with the case inside feel good in the hands.

zephiK said:
Ordered on Saturday, received it today. Love Amazon 1 day shipping (was actually free for me on Prime).
Click to expand...
Click to collapse
Yea same here, kind of surprising, had never seen free one day shipping before. But ordered yesterday and got it today.
So far, love it. I also ordered a ringke slim and a spigen slim armor. The ringke is easily the smallest case as it is really slim, but it also feels like a cheapish piece of plastic. The spigen was good, but a little bit hefty and the buttons on it were terrible.
This is inbetween in size. Small enough that the added bulk doesn't make the phone seem too big, but enough to feel it offers some food protection. It feels good in the hand and looks great. The buttons are a bit stuff but pretty good.
The only real downside is the small microphone? hole near the bottom of the back is slightly misaligned, as the op said.

Can you guys please compare to the ringe fusion?

Also interested in the difference in bulk between this and the fusion

Supcase feels a little thicker but I think its more that the material is harder. It definitely feels slightly bulkier than the fusion.

Just received mine. First case for my nexus as I just received it today too but damn does it feel good. Buttons feel nice and love the clear back to show off the white. Deff slim and love the way its perfectly designed for the nexus with the indent on the back.

I have the PRO SERIES an man is it good! I've had it on since a week after I got the phone. Only complaint is the camera hole is to long (all the way to the Moto symbol). But the protection is there, feel is good, grip is excellent, all cutouts are lined up great! Add the fact that our N6's are water resistant! I'm feeling safe!

Dachank said:
Also interested in the difference in bulk between this and the fusion
Click to expand...
Click to collapse
There's a difference, but it's not a bad difference. It's bulkier than the Fusion but still very much slim and easy to hold in 1 hand.
bob2300nx said:
Can you guys please compare to the ringe fusion?
Click to expand...
Click to collapse
Major comparisons:
1. Buttons on the Ringke Fusion is a lot better, it's clicky. But by no means that the Supcase buttons are bad, they're actually pretty good and nice to press but Fusion is clicky.
2. The Ringke Fusion back is prone to scratches very easily and depending on what color you get. Crystal View may become "yellowish" over time.
3. The dust covers aren't on the Supcase which is a ++++. Yeah you can cut it off but that's kinda cheap.
4. The Nexus 6 "dimple" is present on the Supcase which is really cool, makes the N6 easier to hold on.
5. Supcase has more grip and feels better in the hands. It is slightly more bulky but doesn't add much bulk when compared to a Spigen Slim Armor or something. Very easy to type with one hand and hold with excellent grip.

I love the look of this case (always have) but I'm concerned with the amount of protection it provides vs the Diztronic Ultra I ended up buying on release back at the end of Nov or beginning of Dec (whenever it came out.. Can't remember).

Related

TPU-Cases.Com Black Gloss TPU case Reviewed 8/6/11

XDA member OneStepAhead was nice enough to give away some TPU Cases to fellow Photon users!
My Review of the High Gloss Black:
Ok got this TPU case this morning, and tossed it right on...been running around with it all day. Here's a few things I'll point out for you...
1. It fits perfectly- nice and snug. Cutouts are just right. Easy to put on / take off. No "give" doesn't feel like it'll get loose on ya.
2. The volume rocker and camera button are covered with a layer, instead of a cutout. Depends on your preference here...seeing as the Photon has a unique design on these buttons. I'm fine with it, as it is keeping me from toying with the tread on them. Heh.
3. Not overly slick. Easy to put in your pocket / remove. Seems to have enough friction to prevent dropping. Some of these gloss TPU cases are like holding a wet fish, while your hands are covered in baby oil. This one's just fine. (yeah...don't ask about the baby oil please! )
4. Lightweight - doesn't add any real bulk...most TPU cases don't
5. Great packaging - most of these type of TPU cases just come shipped to you in a plastic baggie. This had said plastic baggie, with another layer of protection inside that...plus a cardboard cutout. (it's the little things that impress)
I'll say in summation, that I've had an overall pleasant experience with this TPU case...and the Rep that sent it to me. Seems like decent Customer Service in my interactions. Of course, in all honesty a TPU case doesn't offer as much protection as an OtterBox...but overall it serves it's purpose!
TPU-CASES.COM
Bandage said:
XDA member OneStepAhead was nice enough to give away some TPU Cases to fellow Photon users!
Stay Tuned for User Reviews!!
TPU-CASES.COM
Click to expand...
Click to collapse
Hey thanks for making this thread! Much appreciated
This could be a helpful thread for me to gather input from you guys on how I can improve our cases in the future. Some of the things I'd like feedback on are the fit (is it tight, are all the cutouts properly aligned?) the volume rocker (is it easy to press? this is one of TPU's weaknesses, the volume rockers can sometimes be difficult) the power button cutout (do you like it? would you rather have it be a molded button like the volume rocker?) any other colors you'd like to see? I usually have more colors then just 2 made for the more popular phones but I only did High Gloss Black and High Gloss Smoke so far for the Photon so I'm open to ideas. Thanks everyone!
TPU Cases! U know just in case u need another genuinely honest review
Sent from my Phantastic Photon 4G
Reviewed 8/6/11!!!
Any chance these will come in other colors eventually?
Sent from my Photon
Received on saturday, initial impressions atr that its nice. better than I expected. I'll have my full review on monday.
Ben
Love mine. My review is on amazon. Brief and to the point. http://www.amazon.com/gp/aw/cr/B005FN35XG/ref=aw_d_crstars_wireless
Sent from my Motorola Photon 4g
On Youtube I found a review of a TPU case where the guy throws his phone out the window of a moving truck and the case protects the phone well. I'm gonna take their word for it and really have no interest in tossing my Motorola Photon 4G out the window of anything.
When I received the case in the mail on Saturday I quickly tore the package open and put it on my phone its a tight fit and my one complaint is that it when I tried taking it off it fit so well that it pulled the battery cover partially off. Certainly not a big deal and really is more of complaint against the phone rather than the case. If the battery cover on the Photon was not so flimsy it would not matter.
The case ads minimal bulk to the phone and really makes it feel better in your hand. The texture is a high gloss shiny black (I think I would like to see them make a matte black).
There are cutouts for the camera, kickstand, power/sleep button, headphone jack & one for both the HDMI and USB ports. All are aligned perfectly and look good. They have done a good job with the volume and camera rocker, they are not hard to press but does take a little practice to make it smooth. This is a surprisingly nice case and for under $10 you really can't beat it. They are available on Amazon for under $8 plus shipping and available from www.TPU-CASES.com for under $9 with free shipping.
I believe the case for the Motorola Photon 4G from TPU-Cases is an outstanding deal.
bbelhorn said:
On Youtube I found a review of a TPU case where the guy throws his phone out the window of a moving truck and the case protects the phone well. I'm gonna take their word for it and really have no interest in tossing my Motorola Photon 4G out the window of anything.
When I received the case in the mail on Saturday I quickly tore the package open and put it on my phone its a tight fit and my one complaint is that it when I tried taking it off it fit so well that it pulled the battery cover partially off. Certainly not a big deal and really is more of complaint against the phone rather than the case. If the battery cover on the Photon was not so flimsy it would not matter.
The case ads minimal bulk to the phone and really makes it feel better in your hand. The texture is a high gloss shiny black (I think I would like to see them make a matte black).
There are cutouts for the camera, kickstand, power/sleep button, headphone jack & one for both the HDMI and USB ports. All are aligned perfectly and look good. They have done a good job with the volume and camera rocker, they are not hard to press but does take a little practice to make it smooth. This is a surprisingly nice case and for under $10 you really can't beat it. They are available on Amazon for under $8 plus shipping and available from www.TPU-CASES.com for under $9 with free shipping.
I believe the case for the Motorola Photon 4G from TPU-Cases is an outstanding deal.
Click to expand...
Click to collapse
Gotta say I do not recommend doing that, haha. TPU cases are not the Otterbox Defender. That person just got lucky, it's possible for a 1 foot drop to cause damage or a 10 foot drop to not cause damage depending on how it lands. If anyone could post some pictures of the smoke case on the phone I would be very grateful.
Just got mine today. I uploaded some "customer images" to the Amazon product page and I will follow up there with my full review in about a day or so. So far everything seems great though!
What other colors would you guys like to see done? Lots of XDA members asked me to do matte cases for the Evo 3D but those arent selling very well, not even a 1/10th as well as the high gloss cases are. So I'm reluctant to do it again, but I would be willing to do a few colors.
Got my case today, and here are my initial impressions:
Fit: Very snug, yet easy to put on. All of the "holes" lined up very nicely, including camera, speaker, hmdi/power, and audio.
One thing to notice right away is that the audio port is not covered up by the thickness of the case. When I got my Hero and a case for it, the case was nice and thick, but it was also very right around the jack. When you tried to insert a headphone 3.5mm plug, some of the plugs, especially on over the ear headphones, have a big thick base. Well on the Hero, I could not "sit" the plug all the way in. This case does NOT have this problem. The access/opening is wider than the 3.5mm receptacle and is beveled. Very nice touch.
On the left side the HMDI and power are obvious open (see the pictures below), but the volume rocker and picture button are covered. I'm not a big fan of this, but it does not hamper use of the phone, it is a preference.
The case has a nice shiny gloss to it and looks sharp. I don't know how this gloss look with stand up over time and I might have opted for a mat finish if it were available. I'd also like to see a red color in the mat, as that is my favorite color, but once again, that is preference.
For $7.90 on Amazon, it's a great value and you really can't go wrong with this case.
Here are some pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OneStepAhead said:
What other colors would you guys like to see done? Lots of XDA members asked me to do matte cases for the Evo 3D but those arent selling very well, not even a 1/10th as well as the high gloss cases are. So I'm reluctant to do it again, but I would be willing to do a few colors.
Click to expand...
Click to collapse
Personally I'd like to see blue, something like a royal blue. I ordered the black for now.
Sent from my Photon
TPU-Case
After my vacation I arrived home to find me TPU Case waiting on me. Put it on a first impression is its a great skin case. It wont provide much protection if you drop it but most cases wont unless you get an otterbox. All the holes line up perfect and it is easy to get in out of pocket. Unlike most skins where its tacky like texture to provide better grip but makes getting in and out of pocket hard. This texture is a perfect balance. All and all its well worth the few dollars that this case cost. I would however like to see the power button to be covered like the volume buttons are.
Got mine today and I really like it. As long as I didn't drop it on the face I think it provides plenty of protection and it's still thin enough for me. Still good for getting in and out of the pocket too.
Sent from my Photon
I received my TPU case yesterday and after a day with it I pretty much have the same opinions as everyone stated. It is a very nice case for such a low cost. I think I have a fan of have the volume and camera keys uncovered but to each his/her own though I do think they should all be covered (including the power button) or none at all to keep them uniform. Oh it does not work with the HD dock unless you remove the insert though I have not tested it without the insert to confirm. It offers enough protection for the average user not looking for maximum protection. Overall I am very pleased.
Added my review of the case here.
Also added quite a few images.
TS out
Just ordered the smoke case. I've had the nexus s 4G, htc evo 3d, and photon in the last 4 weeks or so (yeah I know I'm crazy). I'm sticking with the photon though. I've had these tpu cases for both the nexus and 3d and loved them. Actually made me like the phones more somehow. I really like the see through cases that show the back of the phone off. I'm thinking it'd be cool to have clear, red, royal blue and I really liked the smoke geo tpu case too.
Sent from my killer MoPho 4G using Tapatalk
OneStepAhead said:
What other colors would you guys like to see done? Lots of XDA members asked me to do matte cases for the Evo 3D but those arent selling very well, not even a 1/10th as well as the high gloss cases are. So I'm reluctant to do it again, but I would be willing to do a few colors.
Click to expand...
Click to collapse
I just got this phone for my wife and shes a big fan of purple.

Post pictures of your DNA with your case.

Surprising we don't have thread like this for DNA yet.
So its simple. Post photos of your cases, pouches, flip covers, skins with the DNA and also please do post the source / link from where you got it so it can help others to buy the same if they like it.
Cheers! Will post mine soon.
From my Note 2, right in your face....
I need people to post pics so i can get case ideas....
I'll bite.
This is the Incipio Feather Case.
I paid $23, from DayDeal.com. You can find it on Amazon and, for a little less, on eBay. I was able to drive to DayDeal and pick it up, so I saved shipping charges, and didn't have to wait (I can be very patient, as long as I don't have to wait). DayDeal has also treated me very well in the past, so I'm happy to give them my business, even if it costs me a few bucks.
Comes in Gray, Black, Hot Pink and Blue.
If you're looking for the thinnest, lightest case other then simply putting stickers on the back of your DNA, this case is probably it.
I'm not really sure how much protection it'll provide. I do have another case, which I used when I was on a recent trip skiing, but for day to day use, I really like this case! It retains the sleek look and feel of the DNA, even retaining the curved shape of the back of the DNA. Soft touch paint provides a more firm grip in your hand, something that was lacking in the similar Nillkin case I have. I purchased the smooth Nillkin case (they do have one with dots on the back, but I didn't care for how it looks), and always felt like it was about to slip out of my fingers (came close a couple of times)... the Feather case has no such problems!
If you're looking for a case which you can drop your DNA on concrete, and not flinch, this ain't it!
If you're looking to keep your DNA slim and light, while providing some additional protection, especially from scratches to the back... you may want to give this one a look.
Positives:
Soft touch paint
Ultra thin
lightweight
Displays red highlights of the DNA
Inductive charging works fine with case
Negatives:
Top and bottom edges partially exposed
Doesn't provide maximum protection
Power and volume buttons exposed
Back LED concealed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice I'm going to look for that incipio case ASAP but here's my case mate case bought from a Verizon store in NH
Pics we're taken with my retired Gnex
Sent from my HTC6435LVW using xda app-developers app
I have a couple. A standard case with a built in stand. It came with a holster, which i would never use. Purchased directly from Verizon corporate store. It has a nice design that aids in gripping the phone.
Not too much of a lip
I like how designers gave the user a little extra room past the vol up and vol dn rocker
Corner protection leaves much to be desired
Is everyone's flap chipping away like mine? I had to let a fingernail grow out just to pop this thing out
Here's how the back looks with the stand pulled out
Then there is the Otter Box, again purchased from the Verizon store.
The standard 3-piece fare
Finally, fully clothed
This is what I am bummed about.
Lot of nice looking cases, but most dont have cutout for the back notification light
Those that do have it, all look like crap.
Funkym0nkey said:
This is what I am bummed about.
Lot of nice looking cases, but most dont have cutout for the back notification light
Those that do have it, all look like crap.
Click to expand...
Click to collapse
A little quick work with a drill and that can be solved.
My Trident Aegis case has a cutout in the back for the light.
Got the Incipio dual case, ordered direct from Incipio to get the color combo. Was a little worried about grey/electric green with the employee edition red but in natural light it actually looks pretty cool. You can only see it from the back or looking up at the charging port area. I work for VZW so I'm hoping we'll starting carrying these for the DNA like we do for all the other phones so I can pick up a black/black with my discount.
It adds just a bit of bulk, the soft touch is very nice (similar to the feather the guy further up has) The power button is a lot easier now as well. The case tapers with the phone so it still has that nice feel in the hand, just a bit thicker.
Ballistic HTC Droid DNA SG MAXX
White/clear TPU case from eBay on Employee Edition DROID DNA.
Posted from my Verizon Employee Edition DROID DNA #01749.
Poetic Atmosphere Case for HTC Droid DNA
I bought the Poetic Atmosphere Case for HTC Droid DNA from Amazon for $7 and just received it today. It is a really nice case and fits the DNA perfectly. It adds almost no bulk to the DNA while providing average protection for daily use. The Poetic case also accommodates the rear LED notification light. The back of the case is transparent and a bit slippery while the sides are gray. There are raised buttons for the power and volume buttons. Pictures are available on Amazon. Here is the info from Amazon:
Made of polycarbonate and thermoplastic polyurethane
Transparent durable material
Grey borders surround the edges
Customer built-in volume control buttons
Raised knobs on each corner to protect from surface scratches.
Comparing it to the Ballistic SG Case that I'm currently using, It is a much sleeker case, but the Ballistic SG Case offers more protection at the expense of more bulk. The Ballistic SG Case seems to be squeezing the DNA a bit too tightly and might be causing the bluish splotches on the DNA screen. However, I do feel more at ease if the DNA is in the Ballistic case than the Poetic case. I'll post pictures later when I get a chance.
Just did a review of my DNA with the Incipio Faxion. Thread below.
http://forum.xda-developers.com/showthread.php?t=2087153
Incipio Faxion
Sent from my Droid DNA
Picked up a Nillkin hard case for ten bucks off eBay. Usually go for more protection, but this one's done a good job so far. I also didn't want something that put a stack of pressure on the sides of the phone:
Well worth the ten bucks, the included screen protector goes well also.
http://www.ebay.com.au/itm/Nillkin-...AU_MobilePhoneAccessories&hash=item3a7cb95a60
juzz86 said:
Picked up a Nillkin hard case for ten bucks off eBay. Usually go for more protection, but this one's done a good job so far. I also didn't want something that put a stack of pressure on the sides of the phone:
SNIP
Well worth the ten bucks, the included screen protector goes well also.
http://www.ebay.com.au/itm/Nillkin-...AU_MobilePhoneAccessories&hash=item3a7cb95a60
Click to expand...
Click to collapse
Have this case, I like its slim profile.
Seems like you placed the screen protector a tad low, no lifted edges on mine.
Verean said:
Seems like you placed the screen protector a tad low, no lifted edges on mine.
Click to expand...
Click to collapse
Yeah, in a rush
crikeycrapper said:
I bought the Poetic Atmosphere Case for HTC Droid DNA from Amazon for $7 and just received it today. It is a really nice case and fits the DNA perfectly. It adds almost no bulk to the DNA while providing average protection for daily use. The Poetic case also accommodates the rear LED notification light. The back of the case is transparent and a bit slippery while the sides are gray. There are raised buttons for the power and volume buttons. Pictures are available on Amazon. Here is the info from Amazon:
Made of polycarbonate and thermoplastic polyurethane
Transparent durable material
Grey borders surround the edges
Customer built-in volume control buttons
Raised knobs on each corner to protect from surface scratches.
Comparing it to the Ballistic SG Case that I'm currently using, It is a much sleeker case, but the Ballistic SG Case offers more protection at the expense of more bulk. The Ballistic SG Case seems to be squeezing the DNA a bit too tightly and might be causing the bluish splotches on the DNA screen. However, I do feel more at ease if the DNA is in the Ballistic case than the Poetic case. I'll post pictures later when I get a chance.
Click to expand...
Click to collapse
Had the poetic case...it's nice...but it eventually broke on me. The back of the case started to detach from the sides. I'm by no means rough with my phone so it didnt take much for it to come apart.
mmmboba said:
Had the poetic case...it's nice...but it eventually broke on me. The back of the case started to detach from the sides. I'm by no means rough with my phone so it didnt take much for it to come apart.
Click to expand...
Click to collapse
Yikes. That's not good news. Did you get a replacement? Poetic seems to be giving a 3 year warranty for it.
juzz86 said:
Picked up a Nillkin hard case for ten bucks off eBay. Usually go for more protection, but this one's done a good job so far. I also didn't want something that put a stack of pressure on the sides of the phone:
Well worth the ten bucks, the included screen protector goes well also.
http://www.ebay.com.au/itm/Nillkin-...AU_MobilePhoneAccessories&hash=item3a7cb95a60
Click to expand...
Click to collapse
What camera was used to take the pictures? really clean shots
osmosizzz said:
What camera was used to take the pictures? really clean shots
Click to expand...
Click to collapse
Canon EOS 1100D man, stock 18-55 lens :good:

Any good cases similar to UAG protection?

I have been looking for a case similar to the UAG. I still want to get it, but the camera issue will eventually bug me. The case I'm looking for has to have a clear backing and something of a hybrid like the UAG without the flash issue. Any ideas or suggestions will be appreciated.
These:
WinDroidGuy said:
These:
Click to expand...
Click to collapse
Great reviews man! I still on the fence. I like the poetic because it seems more sturdier than the supcase. On the other hand, I like the look of the supcase a little bit more. I read some reviews for the supcase and it made me cringe when I read the review about the broken device from a small drop. U never had this hard of a problem trying to figure out which case to get for my device.
KappaAce2010 said:
I read some reviews for the supcase and it made me cringe when I read the review about the broken device from a small drop.
Click to expand...
Click to collapse
Just remember, there are stupid people out there writing stupid reviews.
All great products will have their handful of horrid reviews.
KappaAce2010 said:
Great reviews man! I still on the fence. I like the poetic because it seems more sturdier than the supcase. On the other hand, I like the look of the supcase a little bit more. I read some reviews for the supcase and it made me cringe when I read the review about the broken device from a small drop. U never had this hard of a problem trying to figure out which case to get for my device.
Click to expand...
Click to collapse
I prefer the Supcase, but hate the sides since they are rough But the Poetic is best of both worlds!
kvnhmmd said:
Just remember, there are stupid people out there writing stupid reviews.
All great products will have their handful of horrid reviews.
Click to expand...
Click to collapse
Yes, like those drop tests...haha
WinDroidGuy said:
I prefer the Supcase, but hate the sides since they are rough But the Poetic is best of both worlds!
Yes, like those drop tests...haha
Click to expand...
Click to collapse
I have a feeling most people will never drop their phone much more than 5 feet to the ground, in which case, most any slim TPU case will do the job.
If you're careless and constantly throwing your phone around, get the tried and true otterbox.
For the past 5 years, I've been using nothing but TPU cases and a screen protector, after a year or two, my phones still look like new.
I use the Ringke Fusion, and have dropped my phone about 4ft to the pavement once already since it was on my lap when getting out of the car. The phone is unscathed, of course.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bigpapi19 said:
View attachment 3227652
Click to expand...
Click to collapse
Thanks guys for the advice. I went and bought the poetic case. The moko case does look really nice and probably give adequate protection. I did also see the body glove case for the n6 which looked awesome, but then didn't have a clear backing available.
Air Jacket Grip Case (Moto X)
My last phone was a 2013 Moto X which I put into an Air Jacket Grip case by Power Support. It was one of the cases available through Moto. That thing fit around my phone really snug and it was clear so it didn't add much bulk and didn't change the overall feel of the phone. Additionally the phone felt protected from falls and was definitely protected from scratches. My Moto X still looks good as new today.
Any recommendations for something similar as far as feel? I wouldn't mind something in a solid color as I'm not overly excited about having a blue phone but I definitely want that snugness.
The two cases posted by the OP seem to meet the criteria but before I buy, I would like to ask / know if anyone with a similar experience have any opinion or other options.
KappaAce2010 said:
Great reviews man! I still on the fence. I like the poetic because it seems more sturdier than the supcase. On the other hand, I like the look of the supcase a little bit more. I read some reviews for the supcase and it made me cringe when I read the review about the broken device from a small drop. U never had this hard of a problem trying to figure out which case to get for my device.
Click to expand...
Click to collapse
I have the Beetle Supcase and it is nice but I really am not too confident on how much drop protection it would offer. The corners and sides just don't seem like they would have enough cushioning to protect from a fall. But for basic protection it is nice.
fireknuckles said:
My last phone was a 2013 Moto X which I put into an Air Jacket Grip case by Power Support. It was one of the cases available through Moto. That thing fit around my phone really snug and it was clear so it didn't add much bulk and didn't change the overall feel of the phone. Additionally the phone felt protected from falls and was definitely protected from scratches. My Moto X still looks good as new today.
Any recommendations for something similar as far as feel? I wouldn't mind something in a solid color as I'm not overly excited about having a blue phone but I definitely want that snugness.
The two cases posted by the OP seem to meet the criteria but before I buy, I would like to ask / know if anyone with a similar experience have any opinion or other options.
Click to expand...
Click to collapse
I prefer the ringke fusion in smoke black. Helps flatten out the back of the phone as well to make it easier to use on a table. Also check out the dbrand skins if you don't like the midnight blue. Check out the YouTube video below to see the case and the skin. Looks amazing.
http://youtu.be/fRaASeqdn-o
I decided on the poetic case and I love it. Feels pretty good in my hands. Love the clear backing.
KappaAce2010 said:
I decided on the poetic case and I love it. Feels pretty good in my hands. Love the clear backing.
Click to expand...
Click to collapse
Pics please.
mnsportsguy1978 said:
Pics please.
Click to expand...
Click to collapse
There's a video review on the 2nd post though...
kvnhmmd said:
There's a video review on the 2nd post though...
Click to expand...
Click to collapse
I can see that, thanks.
Just FYI, even with the very best heavy duty cases, the glass can still shatter. Sometimes even from short drops. I only mention this because I have the UAG on my Galaxy Note and it fell out of my pocket as I got out of my car this morning. A very short drop of just a few feet. It impacted face down, and even with the substantial rubber lip the glass shatter was a big web. So if you see bad reviews, those are probably just bad luck, not that the case wasn't any good.
ygohome said:
Just FYI, even with the very best heavy duty cases, the glass can still shatter. Sometimes even from short drops. I only mention this because I have the UAG on my Galaxy Note and it fell out of my pocket as I got out of my car this morning. A very short drop of just a few feet. It impacted face down, and even with the substantial rubber lip the glass shatter was a big web. So if you see bad reviews, those are probably just bad luck, not that the case wasn't any good.
Click to expand...
Click to collapse
You are very correct. I've been fortunate enough to have never broken a phone, but i've seen it happen so many times.
personally, im using the Supcase Unicorn Beetle Pro, and its great! I really like the added thickness as now I dont feel like im gonna snap the phone in half. unfortunately the balt clip just broke so I ordered another of the same one to use while I wait for the warranty to go through. If you want to feel more secure with your phone, get this case lol

OnePlus 5 Spigen, Orzly & Tudia case reviews

Hi all,
Now I've had a few more cases come through the door, I thought this would be the opportune moment to start a new thread up and take any questions. I'll be adding the case reviews/thoughts as they come through!
Before I start, you can check out the reviews which were done at the start of the month on the cases that came through first here:
OnePlus 5 Official Protective Cases (Karbon, Sandstone, Ebony Wood)
OnePlus 5 Otterbox & Silicone Protective Case (w/ Orzly/OnePlus TGSP TEST)
OnePlus 5 Orzly FlexiCase & Wallet Case First Look and Review
OnePlus 5 SLEO Hard Case
Spigen Rugged Armor
I'm still awaiting Spigen to put up for sale the rest of their case line in the UK, so for now, the Rugged Armor is the only case I've managed to grab from them. It's very similar to the OnePlus 3 version in pretty much every way!
The Rugged Armor is one large TPU case, it adds a reasonable level of bulk, but also provides a reasonable level of protection. One of my favourite cases so far!
Orzly SlimStand Case
This was a case I bought effectively so I could review it for you guys, however I've found myself using it A LOT. The case itself feels premium, well designed and thing but at the same time I'm happy that it'll provide some impact protection. If it were just the case, I'd be happy- but Orzly have gone a step further and added a stand on to the back of it.
The ringstand on the back of the case, seems to be stuck on well (I've shaken it quite a fair bit) and you can rotate it so you can stand the phone up in multiple different ways. I like it, and I like it even more at the moment as they seem to be selling it for Ā£$4.99
Tudia MERGE Case
Another case that I reviewed last year on the OnePlus 3! As with Spigen & Orzly, I've got other cases on order but Tudia's shipping isn't it's strong point. It took them almost a month to get this case to me, so I'm holding out very little hope that the OMNIX I ordered will be delivered any time soon.
That being said, the case itself is sold, made of two different parts and will provide an adequate level of protection to most people. Be aware that if you've got a skin on your phone, it'll likely rip it off as you remove the case!
MY FAVOURITE: ORZLY FUSION BUMPER
I'll be adding to this post over the next month as more cases arrive!
Amazing.
Waiting spigen neo hybrid case
Enviado desde mi ONEPLUS A5000 mediante Tapatalk
I've just got the silm stand case and I'm actually loving it.
It sounds stupid but it so slim! It's like a protective skin!
The Orzly Fusion case came through today, unfortunately my video camera seems to have given up the ghost. Whilst I try and find some sort of replacement; I've grabbed some photos so you can take a look.
This is absolutely my FAVOURITE case so far. Absolutely worth the purchase in my view!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great idea for a thread! Im loving my flexicases and the slim case I have. Awaiting on my fusion bumper, but seeing as you got yours I should have it soon! Can't wait. The images look great!!
DarkExistence said:
Great idea for a thread! Im loving my flexicases and the slim case I have. Awaiting on my fusion bumper, but seeing as you got yours I should have it soon! Can't wait. The images look great!!
Click to expand...
Click to collapse
After using it for a further day, it's cemented in my mind as my favourite case so far!
niijonodhg said:
After using it for a further day, it's cemented in my mind as my favourite case so far!
Click to expand...
Click to collapse
Great to hear! Would you mind telling me exactly how grippy it is? I see little bits sticking out where your hand would usually rest. I take a lot of photos so if it's grippy that's a win win!
DarkExistence said:
Great to hear! Would you mind telling me exactly how grippy it is? I see little bits sticking out where your hand would usually rest. I take a lot of photos so if it's grippy that's a win win!
Click to expand...
Click to collapse
While I'm not Jono I could answer this.
The zones with extra grip on them are really grippy. I can basically shake my phone with minimal pressure from my hands and it will stay in place. It was a smart idea to put that extra grip where you hand would rest
A Guy Called Revive said:
While I'm not Jono I could answer this.
The zones with extra grip on them are really grippy. I can basically shake my phone with minimal pressure from my hands and it will stay in place. It was a smart idea to put that extra grip where you hand would rest
Click to expand...
Click to collapse
Thanks. How comfortable are the grippy bits? grips van go either way. While I much prefer a phone case to be grippy instead of slippy, in my experience there are different types of grip depending on how soft they are. (grippy bits made of harder plastic materials can sort of stick into your hand and get uncomfortable after a while, but the more softer rubbery types of grip tend to grip well in a way that is really comfortable). Being as you've actually used one of these, which of the two types would you say these are?
They look like the nice soft type in the photos, but I always prefer to hear from hands on experience.
Thanks.
I have the original Bumper Case but my only concern with it is the camera lens on the back. This case is so slim it doesn't raise any protection agains't lens scratches.
Looking at these videos, I like the raised protection on the camera lens of the Spigen case. Sure it is bulky but I rather that and have a good protection.
A Guy Called Revive said:
While I'm not Jono I could answer this.
The zones with extra grip on them are really grippy. I can basically shake my phone with minimal pressure from my hands and it will stay in place. It was a smart idea to put that extra grip where you hand would rest
Click to expand...
Click to collapse
Thanks! No more worrying about doing landscape photography then
AnabolicAndroidz said:
Thanks. How comfortable are the grippy bits? grips van go either way. While I much prefer a phone case to be grippy instead of slippy, in my experience there are different types of grip depending on how soft they are. (grippy bits made of harder plastic materials can sort of stick into your hand and get uncomfortable after a while, but the more softer rubbery types of grip tend to grip well in a way that is really comfortable). Being as you've actually used one of these, which of the two types would you say these are?
They look like the nice soft type in the photos, but I always prefer to hear from hands on experience.
Thanks.
Click to expand...
Click to collapse
I want to say a mixture of the two? The grippy bits are hard but feel like the rest its made of soft touch like the rest of the case. Definitely doesn't get uncomfortable in the hand.
I upgraded to the OP5 from the OnePlus 2, which endured a TON of drops thanks to it's variation of the Spigen Rugged case. I got the OP5 variation soon after buying it, hoping for a similar experience, and I'm glad to say that it's given me just that. Great case, great design and doesn't add a whole lot of weight either.
A Guy Called Revive said:
I want to say a mixture of the two? The grippy bits are hard but feel like the rest its made of soft touch like the rest of the case. Definitely doesn't get uncomfortable in the hand.
Click to expand...
Click to collapse
Yeah, that's the main thing.
On a side note, just an amusing after thought...
Anyone just catching the last sentence hearing us go on about how grippy hard and soft it is might wonder what in the hell we were talking about if they heard that out of context!! (so just for the record, we're talking about the Orzly Fusion case) ......honest!!
AnabolicAndroidz said:
Yeah, that's the main thing.
On a side note, just an amusing after thought...
Anyone just catching the last sentence hearing us go on about how grippy hard and soft it is might wonder what in the hell we were talking about if they heard that out of context!! (so just for the record, we're talking about the Orzly Fusion case) ......honest!!
Click to expand...
Click to collapse
Yeah.... *Looks around* Totally...
Honestly, just talking about the Orzly fusion case.
move along people
I JUST SAID MOVE ALONG

Spigen Tough Armor

Hey just wanted to give my two cents on the Spigen Tough Armor case.
I am a long term Spigen user and have yet to find a case from them that has disappointed, this one certainly keeps that reputation going!
For its price the quality is unbeatable, all the ports are cut accurately and generous enough to accept standard chargers and headphones. The buttons still have that awesome pixel tactile feeling as well. The only con I would give it is I wish the material of the initial layer would be a bit more rubbery to better absorb impacts, it feels closer to a hard plastic than a rubber.
With the two part construction and beefy corners protection is certainly up there with the best, keep in mind it is not minimalistic case and will add a decent amount of bulk, there are drawbacks to protection but I feel this case is a good medium ground between keeping the sleek look of the phone while maximizing durability.
ALSO; the kickstand is an awesome bonus that I never knew I can't live without. It stands the phone in the horizontal position at two different angles.
Here's the link I purchased it from (Amazon Canada, sorry)
https://www.amazon.ca/dp/B07MJ7V5PB/ref=pe_3034960_233709270_TE_item
Let me know if you've got any other questions!
Cheers
T-frizzy said:
Hey just wanted to give my two cents on the Spigen Tough Armor case.
Here's the link I purchased it from (Amazon Canada, sorry)
https://www.amazon.ca/dp/B07MJ7V5PB/ref=pe_3034960_233709270_TE_item
Let me know if you've got any other questions!
Cheers
Click to expand...
Click to collapse
Thanks. Here's the US link.
T-frizzy said:
Hey just wanted to give my two cents on the Spigen Tough Armor case.
I am a long term Spigen user and have yet to find a case from them that has disappointed, this one certainly keeps that reputation going!
For its price the quality is unbeatable, all the ports are cut accurately and generous enough to accept standard chargers and headphones. The buttons still have that awesome pixel tactile feeling as well. The only con I would give it is I wish the material of the initial layer would be a bit more rubbery to better absorb impacts, it feels closer to a hard plastic than a rubber.
With the two part construction and beefy corners protection is certainly up there with the best, keep in mind it is not minimalistic case and will add a decent amount of bulk, there are drawbacks to protection but I feel this case is a good medium ground between keeping the sleek look of the phone while maximizing durability.
ALSO; the kickstand is an awesome bonus that I never knew I can't live without. It stands the phone in the horizontal position at two different angles.
Here's the link I purchased it from (Amazon Canada, sorry)
https://www.amazon.ca/dp/B07MJ7V5PB/ref=pe_3034960_233709270_TE_item
Let me know if you've got any other questions!
Cheers
Click to expand...
Click to collapse
Plus one. I had the tough armor for my v30. I was so happy with it I bought the pixel 3a xl version. I'm happy.
Since I got the purple-ish phone I wanted a clear case. The spigen liquid crystal is really nice. I normally hate cases, but I would rather be safe than sorry lately. So, using that and the LK branded screen protectors. Both work brilliantly together to offer great protection!
frozeninferno said:
Since I got the purple-ish phone I wanted a clear case. The spigen liquid crystal is really nice. I normally hate cases, but I would rather be safe than sorry lately. So, using that and the LK branded screen protectors. Both work brilliantly together to offer great protection!
Click to expand...
Click to collapse
I just received mine this weekend--crystal clear. I really like it. I normally just use a skin to give it grip but decided to try this one even though it took about 2 wks to arrive. My son got the "rugged" version and is very happy with it. On both (and maybe any case), we get a more accurate first-time fingerprint read . I really missed the back-reader when I went to MOTO Z3 P, so looked forward to this one. Being a little smaller, it doesn't seem to read as easily as the N5X or N6P, but these cases seem to put the finger where its needed.
The Spigen liquid crystal presents a nice fit--no gaps--esp around the headphone jack as other clear covers I'd tried in the past. It's easy to get on/off but still sturdy with a cushiony feel. I'm sure this isn't a case for "droppers." We still haven't settled on a screen protector.
ritchea said:
I just received mine this weekend--crystal clear. I really like it. I normally just use a skin to give it grip but decided to try this one even though it took about 2 wks to arrive. My son got the "rugged" version and is very happy with it. On both (and maybe any case), we get a more accurate first-time fingerprint read . I really missed the back-reader when I went to MOTO Z3 P, so looked forward to this one. Being a little smaller, it doesn't seem to read as easily as the N5X or N6P, but these cases seem to put the finger where its needed.
The Spigen liquid crystal presents a nice fit--no gaps--esp around the headphone jack as other clear covers I'd tried in the past. It's easy to get on/off but still sturdy with a cushiony feel. I'm sure this isn't a case for "droppers." We still haven't settled on a screen protector.
Click to expand...
Click to collapse
Oh trust me, you can drop your phone with this and it will be very well protected. I have used the "rugged" they call on the Pixel before and even that was plenty of cushion for quite a few drops on my S8+ (for the S8+, it was not called the rugged case). Don't be too worried, all of their cases are very protective and that is why I trust them. Wife and I both use Spigen, she always has iPhones and I have Androids and we have never had issues. Fitment is always amazing and protection is great as well.
If you can, get the LK screen protectors. Got mine from Amazon. They fit nicely and do not go too far out to the edges, "case safe." It was also pretty easy to install and it comes in a pack of 3.
Edit: if you ordered from either Spigen or Amazon, these cases had to be put in stock as this is a new phone. Normally it does not take long to receive items at all. I prefer ordering through Amazon because you get the Spigen items at a huge discount.
Have this case as well. I initially got a very cheap (less than 5 bucks) case while waiting for this to become available. I've stuck with Spigen ever since my Galaxy S5 and they never disappoint. These are always tough, sleek with a non-obnoxious design, and don't ruin the ability to easily get the phone in and out of your pocket.
This case is great! It's the one I am using.
I bought 3 cases for the P3aXL.
Spigen Tough Armor
Incipio
NiuBox Armor Slim Fit Dual Layer
Spigen was very good. Didn't like the feel of the buttons.
Incipio was a POS fingerprint magnet. Sucked
NiuBox is great!.I love the buttons and the textured feel of the case! It has chrome buttons that look really nice. They really stick out a lot and are so easy to use. The fingerprint reader is angled slightly down. I like it this way. Kept this case and returned the other 2.
Case currently not installed. Waiting on a sim card from Tello.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
Got the sim card in. I love the way this case feels in my hand! Feels like there is no case on. Buttons are the best! Funny it has a 30 day warranty. We will see
Here updated pics with phone in case:
These are clickable images for high rez images:
;
This is what I purchased for mine.. Pixel 3a/ 3a XL | SpigenĀ® [Rugged Armor] Matte Black Shockproof Slim Case Cover. I personally would have purchased a Tech21, I think they are great as well.. Had one for the Note4 back in the day. But Spigen will be my first ever from them.. So far nice easy to put on and fits like a glove.. The way a case should fit.
I get the wanting a case design that you're used to - in my case. it's the SUPCASE UNICORN BEETLE PRO. I have one for the Galaxy S7 Snapdragon (that my incoming 3a XL will replace); naturally, I'll be getting one for the 3a XL. In addition to being a tank of a case at a reasonable price (even on Amazon, it's under $20USD - and that includes the clip-on belt-loop holster) the only lack is a screen-protector (which - for me - is no lack). It also can hide a color choice that you got *stuck* with. (In the case of the S7, it is an ex-Verizon Bold Gold model - complete with the Verizon logo - rather ignominious since the phone itself has T-Mobile firmware in it; therefore I went with Basic (almost "Batman") Black then - I'm sticking with the same color choice for the 3a XL - which will actually match the phone's Just Black.) The S7 is the only cell phone I've ever owned that *wasn't* black (the first cell phone I ever owned was pre-Android - a black Samsung SCH prepaid I bought at Radio Shack; the first Android phone I ever owned was a passed-down Galaxy Nexus in black) - in other words, I don't buy black phones to buck trends - in my case, buying black phones IS the trend.
I just ordered this case. Looks like it has great rubber protection just like the case I had for a Nexus 6. Dropped that N6 a quite a few time times.
https://www.amazon.com/gp/product/B07T95NS28/
.
Dixon Butz said:
I just ordered this case. Looks like it has great rubber protection just like the case I had for a Nexus 6. Dropped that N6 a quite a few time times.
https://www.amazon.com/gp/product/B07T95NS28/
.
Click to expand...
Click to collapse
It is not soft rubber. I don't like that case. Hate the volume buttons. Did not put it on.
Still my favorite! :
https://forum.xda-developers.com/showpost.php?p=79808697&postcount=10
https://www.amazon.com/gp/product/B07SH8TKF9/
.
I grabbed one as well for my 3a XL, love this case. The only con I can think of is it's hard to find the volume buttons sometimes. The power button is textured which makes it easy to feel it.
I had an Axon 7 for the past 3 years, used nothing but the cheapest cases with a kick stand. This Spigen case feels a lot more premium and looks great.

Categories

Resources