My GT 10.1 is rooted but how do I update it to touchwiz? would the update harm my tablet?can someone pls tell me how to get the touchwiz update on a rooted galaxy tab 10.1 without breaking it, thank you
Would like to know as well. Seems like noone knows the answer..
Sent from my ADR6350 using XDA Premium App
do you have clockwork recovery installed?
use that to flash the new docrambone rom in the dev forum
krbernier said:
do you have clockwork recovery installed?
use that to flash the new docrambone rom in the dev forum
Click to expand...
Click to collapse
thanks, but can you please list out the steps, just don't want to brick my tablet and i'm sure there's a lot of peeps here that would like to know how to complete this update, be our HERO please and thanks.
gtabby said:
thanks, but can you please list out the steps, just don't want to brick my tablet and i'm sure there's a lot of peeps here that would like to know how to complete this update, be our HERO please and thanks.
Click to expand...
Click to collapse
Download the rooted stock or deodex version, copy to root of ur tab. Open rom manager, select install rom. After that it's pretty much self explanatory.
Sent from my GT-I9000 using XDA Premium App
go read this: http://forum.xda-developers.com/showthread.php?t=1171089
follow the steps to install clockwork recovery
then use it to install this rom http://forum.xda-developers.com/showthread.php?t=1198921
krbernier said:
go read this: http://forum.xda-developers.com/showthread.php?t=1171089
follow the steps to install clockwork recovery
then use it to install this rom http://forum.xda-developers.com/showthread.php?t=1198921
Click to expand...
Click to collapse
thanks.. i'll read up and try it out..
i assume since it is rooted that you already have clockwork recovery installed.
hold power and vol down to boot into recovery
select wipe cache/factory restore
select install from zip
select the rom i showed you
reboot!
you must put the rom in the root of your tab first
use androzip to move it there
krbernier said:
i assume since it is rooted that you already have clockwork recovery installed.
hold power and vol down to boot into recovery
select wipe cache/factory restore
select install from zip
select the rom i showed you
reboot!
you must put the rom in the root of your tab first
use androzip to move it there
Click to expand...
Click to collapse
sorry but still a newbie here and i might get annoying to some peeps here but just very cautious on how this would work. so i'm going to ask question
factory restore - does this mean i'm going a clean up and unrooting my device? from the steps above? is the end product going to have the touchwiz update or is this the touchwiz update with a email sync problem? where does the touchwiz update happen? i didn't see that step above?
lastly.. is there a video i watch to see this in action.
galaxytabhacks.com is a bit slow on updating their video's on how to update a rooted GT 10.1 with touchwiz update...
thank you all for the current post and i'm sure that there are many users here that will appreciate this information.. (for all you do please post and cheer on the peeps that helped us out).
how did you root your device?
if you follow those directions you will have the latest tw rom rooted
krbernier said:
how did you root your device?
Click to expand...
Click to collapse
i followed the steps (video) from site link galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way
basically follow those same steps.
boot into clockwork recovery
make a backup
do a wipe/factory reset
install zip from sdcard
select the docrambone rom i linked
install
reboot
you are now on the latest tw rom with root...easy!
krbernier said:
basically follow those same steps.
boot into clockwork recovery
make a backup
do a wipe/factory reset
install zip from sdcard
select the docrambone rom i linked
install
reboot
you are now on the latest tw rom with root...easy!
Click to expand...
Click to collapse
almost confident
ok.. so go to clockwork recovery - i know how with that two options (icons by pressing those buttons)
make a backup - don't know how?
factory reset - i'll read up
install zip from sdcard - done it before
install - if i find it i'll select install
reboot - hopefully
so how does the backup work - any steps.. where can i find that option. thanks again for all these information..
in the main clockword recovery menu select back up and restore ...select backup
these are all in the main menu of cwr... dont worry about the wipe/factory restore just select it and do it.....make sure you put the new rom in the root of your tab first. just like you did with the root.zip when you rooted
put the new rom zip in your tab
boot into cwr
make a back up
do a wipe/factory restore
select install from zip
select choose zip
select the rom zip you downloaded and put in the root of your tab
install
reboot
this is from the first link i gave you
Here is the clockwork mod menu
- Reboot system now (self explanatory )
- Apply update from SDcard. (when you connect your device to your computer it will show up as tablet. The SDcard that cwm refers to is simply your device storage. Always make sure to copy install.zips to the root directory of your tablet storage.) You use this when applying an update for a specific ROM if that is what the ROM developer says.
- Wipe Data/ Factory Reset You should always do this before you install a new ROM or if you are having minor issues with your device.
- Wipe cache partition Think of this as the lite version of whats above . If you do above though it doesn't hurt to do this too.
- Install zip from SDcard Use this to install new ROMs.
- Back up and Restore
- Mounts and Storage use this to connect your device to your computer when in recovery mode. It is also possible to transfer files to your device while in this mode.
- Advanced What you are interested in here is something called dalvik cache, you want to wipe this too before installing any new ROM
- Power off
this is the main menu of clockwork recovery
backupand restore...wipedata/factory reset...install zip reboot are all on this menu
krbernier said:
this is from the first link i gave you
Here is the clockwork mod menu
- Reboot system now (self explanatory )
- Apply update from SDcard. (when you connect your device to your computer it will show up as tablet. The SDcard that cwm refers to is simply your device storage. Always make sure to copy install.zips to the root directory of your tablet storage.) You use this when applying an update for a specific ROM if that is what the ROM developer says.
- Wipe Data/ Factory Reset You should always do this before you install a new ROM or if you are having minor issues with your device.
- Wipe cache partition Think of this as the lite version of whats above . If you do above though it doesn't hurt to do this too.
- Install zip from SDcard Use this to install new ROMs.
- Back up and Restore
- Mounts and Storage use this to connect your device to your computer when in recovery mode. It is also possible to transfer files to your device while in this mode.
- Advanced What you are interested in here is something called dalvik cache, you want to wipe this too before installing any new ROM
- Power off
this is the main menu of clockwork recovery
backupand restore...wipedata/factory reset...install zip reboot are all on this menu
Click to expand...
Click to collapse
ok.. almost ready.. can never be ready with these stuff but will try will all these information.. thanks.. you are a HERO for many of us this weekend.. i'll send an update tonight during and after the process .. hopefully if i encounter a problem i can still depend on your knowledge.. thank you.
Need some help as well.
My io tab went into that infinity loop so I flash it by fast boot, but then accidentally rooted it? i guess, as I see the superuser icon.
How do I get it back to stock. I have no backup with it at all....and don't know what is happening.
I just want a normal machine that can update to touchwiz officially. thanks
krbernier, thanks for the help!
Related
Hi,
I have a samsung vibrant T959 with Eclair 2.1 in it. I haven't updated my OS yet , but rooted it using one click. Then to update my OS to Cynogen, I downloaded ROM manager (not premium as it doesnt support 2.1 ver). Then I tried to backup my current ROM using the option Backup Current ROM,but it just goes to recovery mode and has the option to reboot , delete casche etc. Then i just select the reboot option, nothing happens.. What is the problem? What more needs to be done. Is this problem due to the oldy 2.1 eclair I have? Please help. I m dying to update the OS..
Heres how to make a nandroid backup... Boot into recovery and go down and select something called "Backups & Restore" then go abd make a "Backup".
As a reference here's my guide to flash CyanogenMod 7/Miui... http://forum.xda-developers.com/showthread.php?t=1307637
Sent from my SGH-T959 (Samsung Vibrant)
Your guide doesnt mention anything about Rom manager at all. I have gone through a lot of guides and it mentions as :
1) Root it ( which i have done)
2) Titatanium backup (for apps backup ..done)
3) Install Rom manager (done)
4) Update to latest clockwork (clicked the first button and updated)
5)Backup current Rom .. I am stuck here.. as when i click it , it pops out a textbox for name of the backup.. then i set it.. then it reboots ... nothing is backed up.. Can anybody help me in this process??? Please..
OK, although I prefer making a nandroid backup by these steps...
1). Booting into recovery.
2). Go to backup and restore.
3). Then select backup.
...If you really want to do it through Rom Manager then you can try these steps and tell me how they work for you. Since it appears that your recovery may be messed up...
1). Load up Rom Manager.
2). Go into Settings.
3). Go down the menu and check off Erase Recovery.
4). In the Rom Manager main menu select Flash Alternative Recovery.
5). After that Flash ClockworkMod Recovery again, that first button.
6). Reboot.
7.) Try making a backup again.
...Lastly, Rom Manager isn't necessary to flash a rom or to make a backup of your current rom. The backup feature in the CWR menu does the exact same thing just to make that clear. Now when it comes to flashing Miui/CM7, I again refer you to my guide if you get stuck...
Hope everything works out for you & welcome to xda-developers!
I didnt find the options you mentioned for ROM manager. So I am going for Nandroid backup.
I needed to confirm on the following steps:
1) I m skipping steps 2 and 3 ( FLASH BACK TO STOCK (2.1 Eclair) and Download mode)
2) I downloaded your 2.3.9 MIUI link and ODIN .
3) Do I need to follow step 6 abt Get CWR ? Overstock Kernel ? Is it that only after installing this , I would be able to make a bakup of current ROM? I have already flashed clockworkmod recovery which shows 2.5.1.2 in ROM manager. So i though this step would not be necessary.
And when i tried to go to recovery mode, there were only the same four options ,
a)reboot b)reinstall packages c)delete cache etc.. So i googled for this problem and i saw in xda wiki which said to select reinsall packages. So is it correct?? I really dont want my phone to brick... So i may be questioning too much..
techbishesh said:
And when i tried to go to recovery mode, there were only the same four options ,
a)reboot b)reinstall packages c)delete cache etc.. So i googled for this problem and i saw in xda wiki which said to select reinsall packages. So is it correct?? I really dont want my phone to brick... So i may be questioning too much..
Click to expand...
Click to collapse
This is stock recovery. If you are using Rom Manager, make sure it is installed correctly. There is a link in my signature that you can download the custom recovery. Download it, put it on ther insteranl sd card and label it update.zip Make sure it is the only thing labeled that.
Boot into recovery, scroll down to Reinstall Packages and hit it. It will cycle through. Scroll down to Reinstall Packages again and hit it again. It will cycle through again and your stock (blue) recovery will change to custom (green) recovery. From here you can flash your ROM.
Before you go further and we explain something that is not needed, what ROM are you trying to flash?
I have been trying to flash MIUI.us_vibrantmtd_2.3.9_Eng_Deo_ZipA_Signed.zip. Currently I have eclair in my vibrant
Ok i downloaded update.zip, clockwork mod from your signature.. I put it in SD card. Clicked reinstall two times and now I have in green color mode.
1) Here again, theres a option for apply sdcard:update.zip.. do i need this?? I dont need to select it right?
Now I need to
Please confirm the steps below to flash
First i should select backup and restore then after the backup is done , i need to follow the steps below.
1)wipe cache partition
2)advanced- wipe dalvik cache
3)wipe data factory reset
4)install zip from sdcard
Am I correct?
Ok then. It should work for you hopefully.
BTW make sure you are flashing a Vibrant ROM. Iknow it says Vibrantmtd in the .zip but just make sure (there are different versions of the Vibrant out there-ATT [Captivate], TMo [Vibrant model # SGH-T959], Verizon [Fascinate], TMo4g [Vibrant 4g model # SGH-T959v]). I did a quick search and I could not find a 2.3.9 ROM in the dev section. I don't use MIUI so I may not be looking in the right place.
If your recovery goes from blue to green then you should be able to start at Step 7 in N00b_IN_N33D's guide. Good luck and happy flashing.
Edit:::
1) Here again, theres a option for apply sdcard:update.zip.. do i need this?? I dont need to select it right?
Click to expand...
Click to collapse
No
Please confirm the steps below to flash
1)wipe cache partition
2)advanced- wipe dalvik cache
3)wipe data factory reset
4)install zip from sdcard
Am I correct?
Click to expand...
Click to collapse
Yes but check your ROM OP to make sure.
My model is Vibrant model # SGH-T959 .. how do i know if the 2.3.9 supports mine or not.. Couldnt find any info in google (I m too eager to update my OS so not googling much )
My backup is complete and I am about to follow the other steps. So when i install the zip file, if I get any errors, I can always restore my previous ROM .. right?
Yes you can always restore your back up, although not sure why you would want to restore 2.1 stock eclair since you know how to Odin back to stock anyways.
Again, since I do not use MIUI, I am unsure about what ROMs there are and like i said, I just used the simple search bar and couldn't find anything 2.3.9 in our forums. I can suggest anything from 360 productions, as they are supported well and the Devs are on here a fair amount of time.
Maybe before you get flash-fantastic, you should think about what you want out of your ROM and then read some of the OPs. There are plenty of 2.2s with everything working, a fair amount of 2.3.Xs with all the theming that comes with MIUI but also battery drain and memory leaks. And then there are 6+ flavors of ICS (4.0.3) ROMs that you can choose from (I have a guide on installing these if you need it).
OPs on all will tell you what works and doesn't and also the features of that ROM. If you really want MIUI, I suggest you PM N00B_IN_N33D and get his input.
Installation is complete , kinda seems a bit slow.. but what amuses me is I did not have to do the following steps mentioned by noob :
It should start flashing and then enter a bootloop (Vibrant [Splash Screen] > Galaxy S Cyanogen(MOD) > CWR > Repeat). After it does this loop a few times do a battery pull.
Reboot into recovery, which will now be blue (Hold both volume buttons and power. Release power once the Vibrant logo is up).
Go to “install zip from sd card”, select zip from sd... Go and find the MIUI ROM you put on the sd card and flash it again.
This time it should successively install.
Go to "advanced", and select "Fix Permissions". Once it has finished fixing permissions go down and hit "++Go Back++"
Reboot your device.
Do not touch the phone for 5-10 minutes after it has booted... Do Absolutely Nothing! This helps clear any possible bugs.
Is it required??
And then there are 6+ flavors of ICS (4.0.3) ROMs that you can choose from (I have a guide on installing these if you need it).
could you provide me the links to it. Thanks
techbishesh said:
Reboot your device.
Do not touch the phone for 5-10 minutes after it has booted... Do Absolutely Nothing! This helps clear any possible bugs.
[/I]
Is it required??
Click to expand...
Click to collapse
I assume you are talking about this. It is not required but is always a good idea to do. It lets the ROM settle down and any RAM tweaks initiated, different system scripts to finish running,... What is 5-10 minutes if it will save you all kinds of trouble in the future.
And then there are 6+ flavors of ICS (4.0.3) ROMs that you can choose from (I have a guide on installing these if you need it).
could you provide me the links to it. Thanks
Click to expand...
Click to collapse
Sure. You can go here and read all about them. Note that some of these are advanced, experimental, Beta/RC status. So you will want to read them and do some searches before you ask your questions b/c you'll get flamed for sure if you don't.
I successfully performed Unknownforce's hboot downgrade and rooted using Revolutionary. I want to start trying out ROMs but a friend told me I should back some stuff up first.
My first problem is I wanted to take a screenshot of my apps menu just in case I lost them but I wasn't able to do it like I used to with the POWER + HOME buttons.
My second problem is Titanium Backup. Apparently I have to run this in root, but I thought my phone was rooted already? Do I have to run it in a rooted ROM? If so, what's the best way to backup my current ROM and configuration?
I'm so lost. Can someone post a quick and dirty guide to doing these things? It might be easier if I understand the concept and flow of what I should be doing.
Thanks.
jpquach87 said:
I successfully performed Unknownforce's hboot downgrade and rooted using Revolutionary. I want to start trying out ROMs but a friend told me I should back some stuff up first.
My first problem is I wanted to take a screenshot of my apps menu just in case I lost them but I wasn't able to do it like I used to with the POWER + HOME buttons.
My second problem is Titanium Backup. Apparently I have to run this in root, but I thought my phone was rooted already? Do I have to run it in a rooted ROM? If so, what's the best way to backup my current ROM and configuration?
I'm so lost. Can someone post a quick and dirty guide to doing these things? It might be easier if I understand the concept and flow of what I should be doing.
Thanks.
Click to expand...
Click to collapse
If you are rooted, you should have superuser, check your app drawer. Get titanium backup from the market and backup the apps you want or you can just do a full system backup with TWRP (team win recovery). There are many good roms out there. I'm partial to Meanrom. Head over to the EVO 3d developer thread and click on the roll up sticky thread for all the links that can guide you through this.
jhuff83 said:
If you are rooted, you should have superuser, check your app drawer. Get titanium backup from the market and backup the apps you want or you can just do a full system backup with TWRP (team win recovery). There are many good roms out there. I'm partial to Meanrom. Head over to the EVO 3d developer thread and click on the roll up sticky thread for all the links that can guide you through this.
Click to expand...
Click to collapse
How do I tell if I'm a superuser? What exactly am I checking for in my app drawer? Sorry for the newbie questions.
jpquach87 said:
How do I tell if I'm a superuser? What exactly am I checking for in my app drawer? Sorry for the newbie questions.
Click to expand...
Click to collapse
If you used rev then at the end of the process did you choose install the clockwork mod recovery???
#Root-Hack_Mod*Always\
jpquach87 said:
How do I tell if I'm a superuser? What exactly am I checking for in my app drawer? Sorry for the newbie questions.
Click to expand...
Click to collapse
Super user is an app. It gives permission for other apps to have root privileges, such as titanium backup.
If you do not have superuser in your app drawer then most likely your not rooted. Flash this zip from recovery and you'll be rooted.http://db.tt/4MQNcpdb. Revolutionary does not give you root, it just gives you s-off. I am going to assume that you flashed a recovery during the revolutionary process so I will not go into that.
I am not responsible for anything you do to your phone. DISCLAIMER: If you choose to follow these direction and use the zip from above I am not at all responsible for anything that may happen to your phone or sdcard.
1. Go into menu/setting/power and make sure fastboot is unchecked. Fastboot will prevent your phone from booting into bootloader unless you do a battery pull.
2. Power phone off.
3. Boot into bootloader. Do this by holding volume down and power button until phone boots into bootloader. Make sure you hold volume down button first.
4. Once booted into bootloader select bootloader then select recovery. This will reboot phone into recovery. (Navigate bootloader and recovery by using volume buttons and make selection using power button)
5. Once in recovery select "install zip from sdcard"
6. The superuser zip will be in your download folder if you downloaded it directly from phone, select that folder then select the super user zip from the link I provided.
7. Select "yes install zip from sdcard"
8. Once the zip is flashed select "go back" then select "reboot phone".
9. Your phone will boot up like normal. Check in your app drawer for the super user app, if its there your golded. One more note, you can make a backup of your entire setup from recovery. Just select backup/restore and select backup.
ALWAYS MAKE A BACKUP BEFORE FLASHING ANY ROMS OR MODS.
After you have made your backup I would suggest that you update your firmware first then look into flashing what ever rom you choose. Go to this link http://forum.xda-developers.com/showthread.php?t=1443592 and look under other firmware bits and you will see xHausx latest everything. That will give you all the firmware, newest prl, radio, and other updates. It will look like this
Firmware w/o hBoot, System, Boot and Recovery partitions. (Must be S-OFF)
http://dev-host.org/svsae25h2v0n/PG86IMG-2.17.651.5_Firmware_Only.zip
MD5:25442C4C8EDDD628391FA6E3CD9924B0
Once you download it check the md5 and verify that it matches up with the one given under the zip file. IF IT DOES NOT MATCH UP DO NOT FLASH IT, COULD BRICK YOUR PHONE. Redownload it and check it again.If it matches up place it on the root of your sdcard and rename it PG86IMG.zip. make sure it is typed exactly like you see it or the bootloader wont see it. Once that is done boot back into bootloader and you might have to select bootloader. It will find the PG86IMG and ask you if you want to update it. You will have to press volume up to select yes. Once your updated make sure you either rename that zip file or place it into a folder so that the bootloader can't see and prompt to update again. You wont be able to get into recovery from bootloader if it still sees a zip file with the name of PG86IMG.
Sent from my PG86100 using xda premium
Great info, thanks
laie1472 said:
If you used rev then at the end of the process did you choose install the clockwork mod recovery???
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
I did install the clockworkmod.
Just wish I could get temp root without a boot loop, so I could run Titanium backup before I downgrade!
Robert542 said:
If you do not have superuser in your app drawer then most likely your not rooted. Flash this zip from recovery and you'll be rooted.http://db.tt/4MQNcpdb. Revolutionary does not give you root, it just gives you s-off. I am going to assume that you flashed a recovery during the revolutionary process so I will not go into that.
I am not responsible for anything you do to your phone. DISCLAIMER: If you choose to follow these direction and use the zip from above I am not at all responsible for anything that may happen to your phone or sdcard.
1. Go into menu/setting/power and make sure fastboot is unchecked. Fastboot will prevent your phone from booting into bootloader unless you do a battery pull.
2. Power phone off.
3. Boot into bootloader. Do this by holding volume down and power button until phone boots into bootloader. Make sure you hold volume down button first.
4. Once booted into bootloader select bootloader then select recovery. This will reboot phone into recovery. (Navigate bootloader and recovery by using volume buttons and make selection using power button)
5. Once in recovery select "install zip from sdcard"
6. The superuser zip will be in your download folder if you downloaded it directly from phone, select that folder then select the super user zip from the link I provided.
7. Select "yes install zip from sdcard"
8. Once the zip is flashed select "go back" then select "reboot phone".
9. Your phone will boot up like normal. Check in your app drawer for the super user app, if its there your golded. One more note, you can make a backup of your entire setup from recovery. Just select backup/restore and select backup.
ALWAYS MAKE A BACKUP BEFORE FLASHING ANY ROMS OR MODS.
After you have made your backup I would suggest that you update your firmware first then look into flashing what ever rom you choose. Go to this link http://forum.xda-developers.com/showthread.php?t=1443592 and look under other firmware bits and you will see xHausx latest everything. That will give you all the firmware, newest prl, radio, and other updates. It will look like this
Firmware w/o hBoot, System, Boot and Recovery partitions. (Must be S-OFF)
http://dev-host.org/svsae25h2v0n/PG86IMG-2.17.651.5_Firmware_Only.zip
MD5:25442C4C8EDDD628391FA6E3CD9924B0
Once you download it check the md5 and verify that it matches up with the one given under the zip file. IF IT DOES NOT MATCH UP DO NOT FLASH IT, COULD BRICK YOUR PHONE. Redownload it and check it again.If it matches up place it on the root of your sdcard and rename it PG86IMG.zip. make sure it is typed exactly like you see it or the bootloader wont see it. Once that is done boot back into bootloader and you might have to select bootloader. It will find the PG86IMG and ask you if you want to update it. You will have to press volume up to select yes. Once your updated make sure you either rename that zip file or place it into a folder so that the bootloader can't see and prompt to update again. You wont be able to get into recovery from bootloader if it still sees a zip file with the name of PG86IMG.
This will be flashed from bootloader.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Thanks for all your help. I successfully performed all the steps you mentioned but when I boot up and check the 'Software number' it still says I am on 1.13.651.7. Is that how it's supposed to be?
Also, can anyone help me with the screenshot function? It seems I've lost the ability to take screenshots all of a sudden.
Yes you are still on the old software because of the hboot rollback. That is why it shows an older software number and also why you have lost the screenshot function. You only updated the radio and firmware at this point. You should now be able to use titanium backup to backup all you apps. If you want to save the positing of the app on your home screens use the desktop backup feature also in titanium.
Once that's done your ready to flash a rom. I suggest cleanrom to start out. Go here to find it http://www.scottsroms.com/downloads.php?do=file&id=98 this will be flashed from recovery. Once your apps are backed up make sure you sync your contacts with your Google account because flashing a rom the right way WILL erase all user data. It will not effect firmware or radio though.
1. Reboot into recovery
2. Wipe data/factory reset
3. Wipe cache
4. Go into advanced menu and wipe dalvich cache.
5. Install zip from sdcard. Should also be in your download folder if you downloaded it directly from phone. Choose the cleanrom zip or what ever one you chose and your good to go.
I don't remember if clean rom has titanium backup included in the rom or not. If not once your Google account is set back up just download it again and restore all the apps that you backed up.
Sent from my PG86100 using xda premium
Boot into recovery and do a nand back up incase something go's wrong when that's done by now you should have titanium back up installed and back up any apps that you want to keep and then find a ROM that may like and flash it but for you flash the ROM read the post first to find out what's working and what's Knott working and base your desission off that and if you fell thats the right ROM for you try it out and before you flash any Rom's download a super wipe tool I highly recommend it and wipe every thing as normal factory reset wipe dalvic cache scroll down to advance click on it and scroll down to dalvic wipe battery star's wipe and then go back to your download folder and you will install the super wipe tool when thats done your ready to flash your new ROM go back to the download folder and flash the ROM don't install any them's until you've had a full boot and that way you will know what's working and what isn't working. Good luck
sent from Evo 3D GSM s-off using Xda premium
Hey all,
I'm happy with my Tab 10.1 but it can be sluggish and so I decided to root it and install some kind of rom.
For rooting I found this guide on here which seems pretty simpel and useful.
But now comes the real question how do I proceed after this to instal a rom. Which one do I choose?
Is CM10 stable enough for me to try it, or should I go for stock 4.0.4?
And is there a proper guide on how to instal this?
Thanks :laugh:
LollieLaurie said:
Hey all,
I'm happy with my Tab 10.1 but it can be sluggish and so I decided to root it and install some kind of rom.
For rooting I found this guide on here which seems pretty simpel and useful.
But now comes the real question how do I proceed after this to instal a rom. Which one do I choose?
Is CM10 stable enough for me to try it, or should I go for stock 4.0.4?
And is there a proper guide on how to instal this?
Thanks :laugh:
Click to expand...
Click to collapse
I haven't try CM9 but CM10 is running soooo smooth.. http://droidbasement.com/db-blog/
Hope this helps!
jesongaudan said:
I haven't try CM9 but CM10 is running soooo smooth.. http://droidbasement.com/db-blog/
Hope this helps!
Click to expand...
Click to collapse
Okay, I think I'll try CM10, so I guess I should use this one: http://droidbasement.com/db-blog/?p=2749
I guess I'll find a tutorial on youtube on how to instal this with odin.
LollieLaurie said:
Okay, I think I'll try CM10, so I guess I should use this one: http://droidbasement.com/db-blog/?p=2749
I guess I'll find a tutorial on youtube on how to instal this with odin.
Click to expand...
Click to collapse
It's easier to install CWM and flash it there :good:
Yezariael said:
It's easier to install CWM and flash it there :good:
Click to expand...
Click to collapse
Great and how does this work?
LollieLaurie said:
Great and how does this work?
Click to expand...
Click to collapse
I use this tutorial http://androidroot.org/watch_video.php?v=73M6O5DMYGON
Error while trying to flash to JellyBean
About a week ago I flashed my P7510 (Wi-Fi) with this rom cm-10-20120728-EXPERIMENTAL-p3, I had all kind of issues, screen rotation, on the lock screen stating its charging while the battery stated its discharging even connect to the wall, etc.
I was able to go back to the backup I took before I flashed the tab, but now every time I try to flash the tab to a newer rom I get the following error:
Assert Failed: Getprop (“Ro.product.device”) = =”p4wifi”
Getprop (“Ro.product.device”) = =”p4wifi”
E: error in /SDCARD/ 31-07-12-13-30-jellybean-alpha-p4wifi-sig
Status 7
Installation aborted.
After doing a wipe of the cache and data I also get the following error:
E: unknown volume for path [/sd-ext]
Can anyone help me?
Thanks in advace.
2pacus said:
About a week ago I flashed my P7510 (Wi-Fi) with this rom cm-10-20120728-EXPERIMENTAL-p3, I had all kind of issues, screen rotation, on the lock screen stating its charging while the battery stated its discharging even connect to the wall, etc.
I was able to go back to the backup I took before I flashed the tab, but now every time I try to flash the tab to a newer rom I get the following error:
Assert Failed: Getprop (“Ro.product.device”) = =”p4wifi”
Getprop (“Ro.product.device”) = =”p4wifi”
E: error in /SDCARD/ 31-07-12-13-30-jellybean-alpha-p4wifi-sig
Status 7
Installation aborted.
After doing a wipe of the cache and data I also get the following error:
E: unknown volume for path [/sd-ext]
Can anyone help me?
Thanks in advace.
Click to expand...
Click to collapse
Are you flashing with Odin or CMW recovery ?
Can you send the content of build.prop in /system folder ?
Admin_root said:
Are you flashing with Odin or CMW recovery ?
Can you send the content of build.prop in /system folder ?
Click to expand...
Click to collapse
I am in the process of pulling my data (15 gig of movies) for a factory reset.
I used odin to root and I am using cmw 6 to install the rom.
2pacus said:
I am in the process of pulling my data (15 gig of movies) for a factory reset.
I used odin to root and I am using cmw 6 to install the rom.
Click to expand...
Click to collapse
OK Keep me informed
Admin_root said:
OK Keep me informed
Click to expand...
Click to collapse
I went with the UK ICS rom, seems to be working fine.
Otherwise you can follow this I RECOMMAND YOU CM9 MORE STABLE THAN CM10:
- Make a new download of the ROM from pershoot droidbasement
- Download the last CWM (recovery file)
- Download Gapps from goo.im
> Copy ROM and Gapps on the Tablet
> Flash the CWM with Odin 1.85 and USB cable (In PDA field)
> Boot in recovery mod (YOU SHOULD MAKE A FULL WIPE / FACTORY at this Step if you have backup of your datas otherwise tablet should freeze at boot animation)
> Choose install zip from sdcard
> Select the zip ROM and confirm the update
> Choose again install zip from sdcard
> Select the gapps zip and confirm update
> Return to the first menu of CWM and reboot system
Enjoy !
Sent from my GT-P7500 using XDA Premium HD app
Admin_root said:
Otherwise you can follow this I RECOMMAND YOU CM9 MORE STABLE THAN CM10:
- Make a new download of the ROM from pershoot droidbasement
- Download the last CWM (recovery file)
- Download Gapps from goo.im
> Copy ROM and Gapps on the Tablet
> Flash the CWM with Odin 1.85 and USB cable (In PDA field)
> Boot in recovery mod (YOU SHOULD MAKE A FULL WIPE / FACTORY at this Step if you have backup of your datas otherwise tablet should freeze at boot animation)
> Choose install zip from sdcard
> Select the zip ROM and confirm the update
> Choose again install zip from sdcard
> Select the gapps zip and confirm update
> Return to the first menu of CWM and reboot system
Enjoy !
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks, but I kinda like the UK ICS for now, may be in a week or two of fooling around with it, I'll try Jelly bean again.
Yes i understand stock ics is good too
But as i say at the begining of my post i recommand cm9 for a best user experience
See you later ...
Sent from my GT-P7500 using XDA Premium HD app
LollieLaurie said:
Hey all,
I'm happy with my Tab 10.1 but it can be sluggish and so I decided to root it and install some kind of rom.
For rooting I found this guide on here which seems pretty simpel and useful.
But now comes the real question how do I proceed after this to instal a rom. Which one do I choose?
Is CM10 stable enough for me to try it, or should I go for stock 4.0.4?
And is there a proper guide on how to instal this?
Thanks :laugh:
Click to expand...
Click to collapse
Which ROM you choose really is up to you - that's the beautiful thing about Android. Really, the sky's the limit! Well...what's available is the limit but you know what I'm saying
Do your research on the threads under Android Development - all the ROMs that are available for HC, ICS, JB, etc. Think about what YOU want out of your tablet...are you wanting to be on the cutting edge of development where you want an experimental JB that may have some bugs in it, or do you want something super stable and creamy smooth like a custom HC? Or, do you just want to speed up your stock ROM with a custom kernel?
There's SO much on here to explore. It's taken me two weeks just to get to a point where I'm comfortable flashing! I'm running CM10 right now but have been through a couple of other ROMs. Task650's Galaxy Task 14 is a great ROM too.
It's always a good idea to take a Nandroid backup once you go any further...for example I have a Nandroid backup of my unrooted image so to get back to stock I can just restore to that.
Basically when you're ready you just download the ROM of your choosing to your tab (and any required supplementary files - READ THE INSTRUCTIONS ON EACH THREAD VERY CAREFULLY). Reboot into recovery, take a backup, and follow the instructions given by the developer TO THE LETTER for installing the ROM. I highly recommend doing a full wipe of your device (cache partition, data/factory reset, Dalvik cache) before installing any new ROM to ensure you don't run into any issues.
You have all the support you need on this forum to resolve any issue you may have - just make sure you search the threads DILIGENTLY before asking questions, and post questions in the appropriate place - you should be fine!! GOOD LUCK AND HAVE FUN!!!
I completely agree with you ... very good post!
I said CM9 because the tablet is recent and it was nice to see the result with this rom ...
Sent from my GT-P7500 using XDA Premium HD app
djmatt604 said:
Which ROM you choose really is up to you - that's the beautiful thing about Android. Really, the sky's the limit! Well...what's available is the limit but you know what I'm saying
Do your research on the threads under Android Development - all the ROMs that are available for HC, ICS, JB, etc. Think about what YOU want out of your tablet...are you wanting to be on the cutting edge of development where you want an experimental JB that may have some bugs in it, or do you want something super stable and creamy smooth like a custom HC? Or, do you just want to speed up your stock ROM with a custom kernel?
There's SO much on here to explore. It's taken me two weeks just to get to a point where I'm comfortable flashing! I'm running CM10 right now but have been through a couple of other ROMs. Task650's Galaxy Task 14 is a great ROM too.
It's always a good idea to take a Nandroid backup once you go any further...for example I have a Nandroid backup of my unrooted image so to get back to stock I can just restore to that.
Basically when you're ready you just download the ROM of your choosing to your tab (and any required supplementary files - READ THE INSTRUCTIONS ON EACH THREAD VERY CAREFULLY). Reboot into recovery, take a backup, and follow the instructions given by the developer TO THE LETTER for installing the ROM. I highly recommend doing a full wipe of your device (cache partition, data/factory reset, Dalvik cache) before installing any new ROM to ensure you don't run into any issues.
You have all the support you need on this forum to resolve any issue you may have - just make sure you search the threads DILIGENTLY before asking questions, and post questions in the appropriate place - you should be fine!! GOOD LUCK AND HAVE FUN!!!
Click to expand...
Click to collapse
+1
I really wanna be sure what I do:
So if I root the device through this guide: http://forum.xda-developers.com/showthread.php?t=1239185
and afterwards I use this: http://forum.xda-developers.com/showthread.php?t=1787399
I hope I don't screw up the tablet
Admin_root said:
Otherwise you can follow this I RECOMMAND YOU CM9 MORE STABLE THAN CM10:
- Make a new download of the ROM from pershoot droidbasement
- Download the last CWM (recovery file)
- Download Gapps from goo.im
> Copy ROM and Gapps on the Tablet
> Flash the CWM with Odin 1.85 and USB cable (In PDA field)
> Boot in recovery mod (YOU SHOULD MAKE A FULL WIPE / FACTORY at this Step if you have backup of your datas otherwise tablet should freeze at boot animation)
> Choose install zip from sdcard
> Select the zip ROM and confirm the update
> Choose again install zip from sdcard
> Select the gapps zip and confirm update
> Return to the first menu of CWM and reboot system
Enjoy !
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Yes you can also follow this with cm9 or cm10, if you take the recovery file in the same folder than the rom (you should test cm9 first because more stable ... but it's my advice)
Sent with my GT-P7500 CM10
Please some one help me out with this issue
phone is not booting up normally after i tried to flash it using MAD team custom ROM and CM 7
i have attacthced the log file in CWM recovery folder on sd card please some one give me a hand this is my only phone and i dont want t to die
c4gopal said:
Please some one help me out with this issue
phone is not booting up normally after i tried to flash it using MAD team custom ROM and CM 7
i have attacthced the log file in CWM recovery folder on sd card please some one give me a hand this is my only phone and i dont want t to die
Click to expand...
Click to collapse
Install Odin on your PC, get the samsung drivers by installing Kies.
Hold down volume down key, middle of d-pad and power buttons all together while phone is off.
Put a different Rom .zip on your sd card using a PC.
Use Odin to flash clockworkmod to the phone, when fiinshed the phone will boot into cwm.
Use cwm to install the zip you put on the sd.
Reboot into the stable ROM.
GT-I5503 -FLASHED USING CUSTOM ROM -NOT WORKING help!!
brianmillar9 said:
Install Odin on your PC, get the samsung drivers by installing Kies.
Hold down volume down key, middle of d-pad and power buttons all together while phone is off.
Put a different Rom .zip on your sd card using a PC.
Use Odin to flash clockworkmod to the phone, when fiinshed the phone will boot into cwm.
Use cwm to install the zip you put on the sd.
Reboot into the stable ROM.
Click to expand...
Click to collapse
Thank you So much for your response.
I tried to flash using the Europa v 1.0 OPS file so it kinda advanced the things a little bit now i am seeing more steps after amss download on odin while flashing that Stock ROM!
It re boots the phone but not installing the rom - it fails telling
unable to format space f " data " something like this
I am still trying to fix ths up and i will also follow your instructions but i have few questions
1. which version of ODIN do u want me to use
2.shud i use a stock ROm or a CustoM rom ??
3.wich version of CWm shud i flash to the phone
Please respond in the same way you did I really appreciate your help Friend :good:
c4gopal said:
Thank you So much for your response.
I tried to flash using the Europa v 1.0 OPS file so it kinda advanced the things a little bit now i am seeing more steps after amss download on odin while flashing that Stock ROM!
It re boots the phone but not installing the rom - it fails telling
unable to format space f " data " something like this
I am still trying to fix ths up and i will also follow your instructions but i have few questions
1. which version of ODIN do u want me to use
2.shud i use a stock ROm or a CustoM rom ??
3.wich version of CWm shud i flash to the phone
Please respond in the same way you did I really appreciate your help Friend :good:
Click to expand...
Click to collapse
I use Odin Multi Downloader v4.34
The data partition not formating would be a cause for concern, if I was you I would try formating it with ClockWorkMod by doing a data wipe/factory reset.
If it was me I would use my computer to put CyanogenMod 7.2 .zip file on the SD (its stable and handy for getting things working)
Most stock ROMS won't flash through CWM.
So to summerise I would try this:
Go into download mode.
Link up with Odin and select your OPS file (make sure GTI5500 OR 5503 appears at top and not the word Android)
Select "One Package" in Odin options
Download a .zip of Clockworkmod for galaxy 5
select it as the One Package and don't touch the other boxes...
let clockworkmod flash into the phone and let it boot into it
now try the data wipe in clockworkmod
install the cyanogenmod zip from the sd and reboot
good luck
I've attached my Clockworkmod Zip file. I use it at least once a week so its good
[[[FIXED!!!]]] GT-I5503 -FLASHED USING CUSTOM ROM -NOT WORKING help!!
brianmillar9 said:
I use Odin Multi Downloader v4.34
The data partition not formating would be a cause for concern, if I was you I would try formating it with ClockWorkMod by doing a data wipe/factory reset.
If it was me I would use my computer to put CyanogenMod 7.2 .zip file on the SD (its stable and handy for getting things working)
Most stock ROMS won't flash through CWM.
So to summerise I would try this:
Go into download mode.
Link up with Odin and select your OPS file (make sure GTI5500 OR 5503 appears at top and not the word Android)
Select "One Package" in Odin options
Download a .zip of Clockworkmod for galaxy 5
select it as the One Package and don't touch the other boxes...
let clockworkmod flash into the phone and let it boot into it
now try the data wipe in clockworkmod
install the cyanogenmod zip from the sd and reboot
good luck
I've attached my Clockworkmod Zip file. I use it at least once a week so its good
Click to expand...
Click to collapse
c4gopal said:
See I am including the log file from the CWM folder on sd card this is wat it says : see if u can find out whats the issue from ths log please
Click to expand...
Click to collapse
IT GOT FIXED!!!!! FINALLY THANK YOU FOR YUR SUPPORT A LOT
Here's wat i did
1. i was using the wrong TASS ops File it was the same but name was too long i editied it ti EUROPAv1.0.ops ( <--------Very important )
2.Initially i flashed the stock ROM then the stuck point broke odin downloader continued after amss download and also automatically rebooted the phne
3. samsung recovered from boot loop but still gave an error telling cant format the space F: "data" when i rebooted normally it advanced till that shiny samsung logo after the animation while booting up phone never booted
4. then i tried to load recovery CWm mod to odin ..it was giving that famous error not able to mount sd-ext emmc failed
5. i DID data wipe and cache wipe din work ,i went to advanced> format /data >format /cache> format/system , > format/sd ext and i mounted all of these again using same menu
6. I Flashe MAD team CM 10 based cust ROm using CWM and rebooted without installing G apps ( which for me seems like a twist cause earlier i had flashed gapps every time i flashed the rom so this time i chose not to may be for a gud caus ** INSTINCT ** )
7. IT WORKED !!! phone started to boot with CYANOGEN LOGO i started dancing > everythings fine
8. I took a BACKUP!! which shudve been done in step 0 other wise which this story wud not be here today!! BACKUP IS VERY VERY IMP!!! :good::good::good::good::good::good:
THANK YOU very very much my friend :good::good::good::good:
c4gopal said:
IT GOT FIXED!!!!! FINALLY THANK YOU FOR YUR SUPPORT A LOT
Here's wat i did
1. i was using the wrong TASS ops File it was the same but name was too long i editied it ti EUROPAv1.0.ops ( <--------Very important )
2.Initially i flashed the stock ROM then the stuck point broke odin downloader continued after amss download and also automatically rebooted the phne
3. samsung recovered from boot loop but still gave an error telling cant format the space F: "data" when i rebooted normally it advanced till that shiny samsung logo after the animation while booting up phone never booted
4. then i tried to load recovery CWm mod to odin ..it was giving that famous error not able to mount sd-ext emmc failed
5. i DID data wipe and cache wipe din work ,i went to advanced> format /data >format /cache> format/system , > format/sd ext and i mounted all of these again using same menu
6. I Flashe MAD team CM 10 based cust ROm using CWM and rebooted without installing G apps ( which for me seems like a twist cause earlier i had flashed gapps every time i flashed the rom so this time i chose not to may be for a gud caus ** INSTINCT ** )
7. IT WORKED !!! phone started to boot with CYANOGEN LOGO i started dancing > everythings fine
8. I took a BACKUP!! which shudve been done in step 0 other wise which this story wud not be here today!! BACKUP IS VERY VERY IMP!!! :good::good::good::good::good::good:
THANK YOU very very much my friend :good::good::good::good:
Click to expand...
Click to collapse
Haha Wonderful
Your welcome, I did a dance too the first time I booted CyanogenMod after a brick
brianmillar9 said:
I use Odin Multi Downloader v4.34
The data partition not formating would be a cause for concern, if I was you I would try formating it with ClockWorkMod by doing a data wipe/factory reset.
If it was me I would use my computer to put CyanogenMod 7.2 .zip file on the SD (its stable and handy for getting things working)
Most stock ROMS won't flash through CWM.
So to summerise I would try this:
Go into download mode.
Link up with Odin and select your OPS file (make sure GTI5500 OR 5503 appears at top and not the word Android)
Select "One Package" in Odin options
Download a .zip of Clockworkmod for galaxy 5
select it as the One Package and don't touch the other boxes...
let clockworkmod flash into the phone and let it boot into it
now try the data wipe in clockworkmod
install the cyanogenmod zip from the sd and reboot
good luck
I've attached my Clockworkmod Zip file. I use it at least once a week so its good
Click to expand...
Click to collapse
Do u falsh it thru ODIN!! ?? coz i found out that thers no way to boot this i5503 into recovery mode using those 3-key combinations like other phones
c4gopal said:
Do u falsh it thru ODIN!! ?? coz i found out that thers no way to boot this i5503 into recovery mode using those 3-key combinations like other phones
Click to expand...
Click to collapse
Yep! There is no key combo for recovery on Galaxy5, if I need to boot recovery and cannot load the rom I just put it in download mode and use odin to reflash clockworkmod, then when its finished it auto boots into cwm and I do whatever I need to
Hello all i downloaded framaroot and installed it. It says Suscess pls reboot... Ok i turned off and on again but no Superuser app. Then i watched this thread: http://forum.xda-developers.com/galaxy-s2/orig-development/30-10-2012-k-la-lp-t1103399 then i looked for my Kernel Version but no of this matched to my kernel: [email protected] #2. Is my phone now rootet or not? I tried to install Supersu but ist says it inst installed the binary. So i Need help please.
a.kami said:
Hello all i downloaded framaroot and installed it. It says Suscess pls reboot... Ok i turned off and on again but no Superuser app. Then i watched this thread: http://forum.xda-developers.com/galaxy-s2/orig-development/30-10-2012-k-la-lp-t1103399 then i looked for my Kernel Version but no of this matched to my kernel: [email protected] #2. Is my phone now rootet or not? I tried to install Supersu but ist says it inst installed the binary. So i Need help please.
Click to expand...
Click to collapse
Install Apps like Titanium backup which needs root privilege at start when you open and further you can verify if your device is rooted !!
Okay i installed Titanium Backup and it seems i dont have root. It failed it says. So how i can root my phone with this kernel : [email protected] #2 ?
a.kami said:
Okay i installed Titanium Backup and it seems i dont have root. It failed it says. So how i can root my phone with this kernel : [email protected] #2 ?
Click to expand...
Click to collapse
Try framaroot again and see if it works. There was a Q&A part explaining your scenario where "Framaroot say Success but SuperSU is not installed after reboot".
Update: After using the search function, I found the CF- auto root designed for your firmware: http://download.chainfire.eu/24/CF-Root/SGS2/CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.zip
Instructions - ODIN (long)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached CF-Root-xxx-vX.X.zip
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select CF-Root-xxx-vX.X.tar
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
- Done (if it took you more than 30 seconds, you need practise!)
Thanks. I downloaded the CF-Auto root. And it works. My next question is: Can i "install" Cyagonenmod or something? For a newer Android Version. Or should i dont do it?
a.kami said:
Thanks. I downloaded the CF-Auto root. And it works. My next question is: Can i "install" Cyagonenmod or something? For a newer Android Version. Or should i dont do it?
Click to expand...
Click to collapse
You will have to install a kernel with a custom recovery (such as philz kernel). Then you will be able to install custom roms.
gsstudios said:
You will have to install a kernel with a custom recovery (such as philz kernel). Then you will be able to install custom roms.
Click to expand...
Click to collapse
Okay. But which should i install and is there a tutorial? I'm a beginner in this so i Need help ^^
EDIT: With custom recovery you mean CWM? If it is so then it's installed with that CF-Auto root data.
a.kami said:
Okay. But which should i install and is there a tutorial? I'm a beginner in this so i Need help ^^
EDIT: With custom recovery you mean CWM? If it is so then it's installed with that CF-Auto root data.
Click to expand...
Click to collapse
Yes, cwm is a custom recovery. The included cwm on cf auto-root is quite old and won't allow you to install kitkat and some jelly bean roms. You can always try
gsstudios said:
Yes, cwm is a custom recovery. The included cwm on cf auto-root is quite old and won't allow you to install kitkat and some jelly bean roms. You can always try
Click to expand...
Click to collapse
Ok when it is that old what can i do too get kitkat(4.4) or something?
a.kami said:
Ok when it is that old what can i do too get kitkat(4.4) or something?
Click to expand...
Click to collapse
The easiest way to get kitkat rom and get new recovery is to use cyanogenmod installer. Then it would be much easier to install other roms of your choice.
OK does it work with dat cf auto root? And is there a link and tutorial?
a.kami said:
OK does it work with dat cf auto root? And is there a link and tutorial?
Click to expand...
Click to collapse
Lol. To get cyanogenmod installer, go to get.cm on your phone's browser then follow on screen instructions, that's it. The installer actually doesn't need any root as it will install root anyway (in this case, you will keep root). Be sure to backup! Happy flashing
gsstudios said:
Lol. To get cyanogenmod installer, go to get.cm on your phone's browser then follow on screen instructions, that's it. The installer actually doesn't need any root as it will install root anyway (in this case, you will keep root). Be sure to backup! Happy flashing
Click to expand...
Click to collapse
I installed it. But then the installer want to download "operating System" and after 5 min or something it says : Download failed. We were unable to download CyanogenMod for your device. Please check your Network Connection and try again.
a.kami said:
I installed it. But then the installer want to download "operating System" and after 5 min or something it says : Download failed. We were unable to download CyanogenMod for your device. Please check your Network Connection and try again.
Click to expand...
Click to collapse
Must be a problem with the firewall. I can teach you the manual way then, but it is definitely harder. Don't worry, I will guide you through;
I guess you are on gingerbread so follow my guide carefully:
Recovery navigation:
Up and down - Volume button
Select - Power key
1. Download the latest snapshot of cyanogenmod 11 onto your phone's storage here: https://download.cyanogenmod.org/get/jenkins/90770/cm-11-20141115-SNAPSHOT-M12-i9100.zip
2. (Optional) Download the compatible gapps file onto your phone's storage here: http://itvends.com/gapps/gapps-kk-20140105-signed.zip
3. Download the latest philz recovery onto your phone's storage here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9100/philz_touch_6.48.4-i9100.zip
4. Reboot your phone into recovery (turn off phone, then press power button, up and home button all together until you see the samsung logo)
5. You should now see the recovery, select flash a zip
6. Select Internal sd card or ext sd card (if these are not on the menu, sd card 0 = internal sd card, etc)
7. Select philz recovery zip
8. Confirm to flash
9. Return to main menu
10. Go to advanced
11. Select reboot to recovery. Your phone should reboot back into the new recovery
12. Once back into the new recovery, select factory reset. Your phone will now delete all of your apps!
13. Then select wipe cache partition.
14. Then go to advanced, then select wipe dalvik cache.
15. Go back to the main menu
16. Select Flash a zip
17. Select the storage location that you used for your downloads
18. Locate and select the cyanogenmod .zip file and confirm to flash
19 (Optional)Select gapps .zip file and confirm to flash
20. Return to main menu
21. Select reboot device
The first boot may take long so be patient. If it doesn't bootloop, you have successfully flashed a rom onto your device!
Ok just a question does it work with may CF-Auto root? It has the CWM 4.0.0.2 . So i'm just carefull cause i dont want to brick my phone ^^
BIG EDIT Okay i just flashed it. And it works . Thanks for the help really .