I just recently got my 3vo and i need a case for it, never been a big fan of the otterboxes (just seem too bulky). I need a case that looks good and gives some protection.. i have a 2 year old that loves to play with my phone.. But im not sure what to get.. I dont work in construction or take my phone on any extreme sports, but i do forget my phone on my lap in the car all the time and go to get out and boom it hits the ground.. so i do need some protection..
So far this is the one im likeing
http://www.seidioonline.com/product-p/csk3hev3d-wh.htm
If you have a Best Buy near you, you can go there an try on some cases. They carry the one you posted too.
I had that case for my Evo 4G and I liked it a lot. Very nice case. The ones at Best Buy are named Pt, but they are made ny Seidio for Best Buy. Same exact case, just a different name stamped on it.
Sent from my PG86100 using XDA Premium App
The casemate tough case is pretty nice. It's not super big like the defender but its not slim either. But it looks nice, fits great and protects well. I got mine off ebay for about 22 bucks new. Well worth it. I also have the seidio active but prefer the tough case and haven't taken it off for the last 2 weeks or so except to clean it.
Sent from my PG86100 using XDA App
I'm still waiting for the Ballistic Case for the Evo 3D to make its appearance on their website; waiting on the HC version.
The CaseMate's look pretty good as well. I've seen good reviews for the Tough Case that they make.
However, SLM is correct. Go try out the Platinum cases at Best Buy before you take the plunge with the Seidio case. It costs $34.99 at Best Buy for the same Seidio one you're interested in.
I'll tell you from experience that I have the Platinum case (a.k.a. a rebranded version of the Seido Active case), and it's pretty sweet! Rumor has it that Best Buy will also be getting the Seidio 1900 mAh batteries as well, but they'll too be rebranded as Platinum. The case I got is excellent and slimmer than the Otterbox cases. It comes in two pieces. You have a silicone sleeve with a felt-like interior that wraps around the phone, and then you have a strong plastic skeleton that wraps around the sleeve. Although the case is great, there are a few things that I don't like about it. For one, if you keep your phone in your pocket like me, you'll start to notice pocket lint collect around the edges of the case. Also, it's sometimes hard to press buttons around the edges of the phone. For example, I use Swype, and when I have to manually type in a word instead of swiping, it can be difficult pressing letters such as P or A. I'll accidentally hit the O or S keys. But it does offer damn good protection. I've gotten so accustomed to the case that it's just weird to hold the phone without it. The case also protects the dual cameras in the back. I have no clue why HTC decided to have the cameras stick out, but this case offers protection for them. As far as my pocket lint issue goes, I think I might invest in a holster for the phone. I'm not sure if Best Buy sells the Platinum branded holster that is compatible with the Active case, but I'll look sometime this week and let you know. I use my phone as my primary music player, whether it's mp3s stored on the phone, FM radio, or Internet radio, and I think that having it on my hip instead of my pocket will be a little bit more convenient for me.
As far as cases go, I've only seen the Platinum case with the black skeleton being sold at Best Buy. Seido sells their Active case with different colored skeletons, but the sleeve still remains black. I'm kinda disappointed Best Buy didn't sell the burgundy skeleton. I think it would've looked nice on this phone (I'm a fan of dark red colors.). If you want something more rugged, Seido sells on their website the Surface case (a hard two piece plastic shell available with or without a kickstand) and the Convert case. If you plan on drunkenly abusing your phone or chunking your phone at the wall after a pissed off conversation, I recommend the Convert case. It's like a combination of the Active and Surface cases. The inner layer is the Surface case, and then it's wrapped with a silicone sleeve and skeleton like the Active case. It also has a detachable cover for the rear cameras. To top it all off, the Convert case comes with a precision-cut screen guard. I don't really need all that thickness and protection, but I would put money down that the Convert case holds up to its name. If you plan on getting an extended battery though, make sure you get an extended case since the regular cases won't fit with the extended battery door.
Anyway, I hope this helps. Good luck shopping for the right case!
I bought a silicon case with the wave. Protects camera, wich had to be protected since it sticks out. Also protects the other buttons and seems to fit well...
Its only 1,50 dollar so thats not a bad deal.
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Only one downside, almost every 3vo owner has it
Red Body Glove case
I have the Body Glove case in red, and I like it a lot. It is a nice looking case.
I have no issues with mine unlike some others, but check out the pictures here:
http://forum.xda-developers.com/showthread.php?t=1141005
The available colors are Red, Blue, Gray, Silver, and maybe White too.
Thank for the info guys im going to head to beat buy today and check it out..
butterbuns said:
Thank for the info guys im going to head to beat buy today and check it out..
Click to expand...
Click to collapse
Sounds good, let us know what you decide. Bhambalek said they only have the black skeleton shell at his Best Buy. My local Best Buy only had them in white. Maybe yours will have both so you'll have options. Good luck!
Sent from my PG86100 using XDA Premium App
Just unpacked and put on my Seidio Active with holster, got the saphire blue from Versio Mobile on Amazon, 34.49 shipped.
Very nice case, fits very snug, like the inner skin and outer skeleton, holster is very solid. Only complaint, that the camera glass is not protected; probably order a carbon skin so I can throw some protection on that glass. Had a TPU on her since day one and glad I upgraded to this one.
Delano.888 said:
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Click to expand...
Click to collapse
I also like and recommend the TPU Skin Cover Phone Case for HTC Evo 3D http://www.amazon.com/TPU-Cases-Flexible-Sprint-Retail-Packaging/dp/B0053NWDO0
I have the Sedio Surface case and am happy with it. Decent protection and it has a kickstand also.
I posted a review on sprintusers, but dont know the policy here about linking to other forums.
i picked up the PT Cruiser case yesterday, i was able to get the black and white one that i liked.. Now i first off the bat i really like the look and feel of the case, but i dont like how the phone fits in the rubber sleeve, its not a real snug fit. So i can see pocket lint and other things easily able to get inbetween the phone and the rubber side, but other then that i like it so far.. Its still a lil early to make a final decision on the case..
But again thanks for everyones responces, i have to say this site really does rock!!
one word: otterbox defender. Ok so that was 2 words.
I have four requirements:
(1) Decent protection all around except for screen.
(2) Protection for the camera.
(3) Must lie flat and not wobble when typing w/phone on table.
(4) Must not make the phone significantly fatter (otterbox is OUT).
Anyone have any suggestions? I actually like the gel case from Sprint but it doesn't protect the camera.
Mike
i like seidio case the best
i've tried all sorts of cases and I keep coming back to my casemate tough case, can't go wrong with that one. It's not that bulky and offers just the right amount of protection without having your phone inside a vault like the defender.
Seidio Active or Platinum Cruiser. I had the Seidio on my Evo 4G for a year. Get the holster from Seidio to prevent the lint issue and clip it inside of your pocket. Something that nobody mentioned is that the rubber bezel allows you to set the phone face down without the screen contacting. That also makes it slip resistant and prevents an unattended ringing phone from vibrating off of the desk. Not too much bulk either.
Sent from my 3vo using XDA Premium App
Related
Currently have xperia x10(hence the forum =), but my case is bothering me greatly. I have a stupid silicon one i bought online, it offers great protection, but makes the phone unattractive and comes off wayyyy to easily. Anybody have any suggestions on a new one? I'm thinking of the otterbox or the incipio one. I'm looking for an attractive case that has somewhat decent protection. Any suggestions?
I have a smoke clear case made of TPU that I got on eBay for just a few dollars (U.S.D.). It's not bulky like the hard plastic or rubberized plastic cases are and it's not sticky like the silicone cases can be. The case itself is bendable and 'rubbery,' but smooth. I think it offers great protection for the price. I've been using it since last year with no problems.
I got mine from an eBay seller named 'dcmugen88.' There are other cases for the X10 that are made of TPU, but the smoke clear one he sells has no designs on it and I like that.
He's selling one now for $3.49 (U.S.D.) and free shipping:
http://cgi.ebay.com/BLACK-Soft-TPU-...622195?pt=PDA_Accessories&hash=item3a5aed92b3
Oh...my girlfriend has an HTC EVO 4G with a TPU case too. She recently dropped the phone into water accidentally, and the TPU case kept almost all the water out of the protected areas. Her phone still works perfectly.
I did not like the silicone case, I wonder anyone took his leather case?
I am looking to get the otterbox commuter case but they want $50+ for shipping also... which is too much IMO.... if anybody knows of any sites please let me know....
Sent from my X10i TripNMiUI-IRIS
krusell orbit flex
aval1392 said:
Currently have xperia x10(hence the forum =), but my case is bothering me greatly. I have a stupid silicon one i bought online, it offers great protection, but makes the phone unattractive and comes off wayyyy to easily. Anybody have any suggestions on a new one? I'm thinking of the otterbox or the incipio one. I'm looking for an attractive case that has somewhat decent protection. Any suggestions?
Click to expand...
Click to collapse
i use krusell leather case for the x10 and i would recommend it greatly ... the clip system is just great ...especially if you use your x10 as navigation device in your car or for sports on your arm/bike ...
it offers great protection too for normalday use ..
http://www.krusellcases.com/uk/p_krusell_zoom.aspx?i=197423
http://www.krusell.se/de/products/multidapt
Hi
I purchased a Capdase Alumor Metal Case from mobilefun.co.uk, its a really good fit and feels sturdy, I am very happy with it.
I got one of the silicone cases of of amazon and it is muck, terrible fit.
there arent good cases for x10 out there....
I have used many cases. I am still searching for "thee" case.
So far I have used the silicon, and gel/cases and they are bleh.
I did try a leather case, the Melkco Jacka type case.
http://www.melkco.com/scripts/main/viewitem-SESE10LCJT1BKIT-SE10.html
I really like this case, BUT, and this is a bit BUT, it's poor design.l The phone fits/snaps into place perfectly, however, its a "from the bottom" flip case. The cover, when you flip it over, at the bottom presses the home button. This turns your phone screen on. At this point the cover is now pressing on the home button the entire time the cover is closed. The screen does time out in 5 seconds, however, while in your pocket, it constantly bumps and activate the screen with he slightest touch. Draining battery.
I am about to order this case. So far I have been told it's probably the best case there is for an x10. It's an Incipio case. http://www.myincipio.com/Sony-Erics...on-Xperia-X10-EDGE-Hard-Shell-Slider-Case.asp
What I really want is a Seidio case. Too bad they don't make them for the x10. I have one for my atrix and it;s the best case I have ever had.
http://www.seidioonline.com/product-p/csk3mtatr-bl.htm
Just wanted to see if anyone has any of the Case Mate series cases for the Evo 3d? I was thinking about getting the Tough case, but from a video review on youtube, the case apparently has a random port on the bottom...
http://www.youtube.com/watch?v=mskLfmXEh0Y
Where I have found them online:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28094#section10
http://www.wirelessground.com/htc-e...3d-case-mate-tough-case-black&channelid=FROOG
Currently have the Defender, but DAMN its bulky
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
mattfmartin said:
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Please fill me in lol
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
HTCRALEIGHFAN said:
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Maybe I will have to reconsider, I would still like to see some more people weigh in. I have the OB Defender right now, and its excellent protection wise just a bit bulky...
The convert from seidio/BB is pretty awesome two good cases plus a nice clip. This is until I can get the ballistic case
Sent from my PG86100 using Tapatalk
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, no interference with function or sensitivity at all.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
I have the casemate "barely there" case on my OG Evo. I have been using it since shortly after launch and it has been just the right amount of protection without adding a lot of bulk. I keep my phone in a pocket with nothing else so that case helps with day to day wear and more importantly it makes it so the camera glass doesn't touch the table when the phone is laying on its back.
I am thinking of picking up an Evo 3d for my girlfriend in order to replace her dying palm Pre but she is pretty rough on phones. She drops hers a lot and throws it in her purse with keys and change and stuff. The thought of getting her a "glass slab" style phone frightens me. I will probably pick up a barely-there case for the Evo 3d if I get it for her. It's weird that they don't list them on their site but that mobilecity site seems to have them in a few colors for $15. That's a good price IMO and my last one came with a free screen protector. Hopefully that will be enough to protect her phone.
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
po96od said:
The case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other. I don't know why those are there, but they don't do any harm.
Click to expand...
Click to collapse
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
minieod said:
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
Click to expand...
Click to collapse
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
#Winning# said:
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
Click to expand...
Click to collapse
hey sorry, my PM notifications are not working i guess
i am going to take some pics of mine now and post here
(note: these pics were taken on an Evo3D)
http://imgur.com/a/cCdel
neodorian said:
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
Click to expand...
Click to collapse
get the 3d on her plan...swap the 3d to your number, and your evo to hers....at that time you both have two new activated phones...both are now eligible for the TEP
also, now you will have a 3d
minieod, nice pics. I was meaning to post some, but you were way more completist about it than I would've been.
The mystery hole at the bottom is for a lanyard.
i wish it would come with a holster
Phreddo said:
The mystery hole at the bottom is for a lanyard.
Click to expand...
Click to collapse
lol
no...its the microphone...when your mouth makes noise, that noise goes into that hole
po96od said:
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, since the TPU case I was initially using basically disabled it.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
Click to expand...
Click to collapse
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
mrazzino said:
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
Click to expand...
Click to collapse
eep - its on amazon for $30 + free shipping (which is free returns)
Anyone know if either the tough case or the barely there case will fit into the belt holster for the Seido Surface case(aka the plaitunum case at Best Buy)?
I'm currently using a TPU case in the Platinum holster because I like the added camera area coverage of the TPU case. I just hate the camera button covering of the TPU case.
The Case Mate cases look great but I really need a belt clip with them.
the wifes casemate shipped yesterday and will be here this weekend ill toss up pics
Sent from my PC36100 using XDA Premium App
My Atrix has become a scratch magnet so i need to get a good case and I cant decide which one to get
so which case should i get?
I need a case that will completely protect my phone from scratches and falls, yet also allow me to use a dock, and not be to heavy at the same time
so far these are the ones that i think will work just need anyone's advice as to which one to get...
http://www.amazon.com/Black-Hybrid-...30E8/ref=sr_1_3?ie=UTF8&qid=1317828950&sr=8-3
http://www.ebay.com/itm/OTTERBOX-IM...ccessories&hash=item1c1e676cf5#ht_1524wt_1139
http://www.ebay.com/itm/5-Accessory...ccessories&hash=item2eb819cfb9#ht_3190wt_1139
If anyone knows of a better case to get could you please post a link...preferably to ebay or amazon
Thank you to anyone who is willing to help
I got this one at Radio Shack and so far I like it. Seems to give the phone a little protection and does not add too much to the phone. It was only about $9.00.
Incipio MT-106 Feather Case for Motorola Atrix 4G - Matte Black
I have the speck case. Very durable and even dropped my phone from about five feet high landing on the corner of the case on the edge of my metal bedframe. The case has a little dent where that happened but nothing happened to the phone. Doesnt fit very well in the dock but is extremely easy to take on and off.
you should think about getting a new back cover (i believe they come in green or blue) and then just putting a high quality screen protector on your phone. the scratch issue is gone, the phone still fits in the dock, and the screen is decently protected.
this may help:
http://www.ebay.com/itm/Back-Batter...main_0&var=&hash=item6d703bcec9#ht_6493wt_850
I would recommend the Seidio Active case from www.seidioonline.com if you dont like bulk but want decent protection. I own that case in Sapphire Blue and love it. I'm currently using my Ballistic HC series case, which is the BEST protection you can possibly get for the Atrix. Beats the otterbox defender hands down.
http://www.amazon.com/Seidio-CSK3MT..._1_6?s=wireless&ie=UTF8&qid=1317856016&sr=1-6
here's the active case
it looks pretty cool i just ordered mine!
i'm probably going to order me a case from Trident, this one looks so cool!
http://tridentcase.com/product_62_81.html
#1for trident or a cheep alturative is a bodyglove for less than 20$
Sent from my MB860 using xda premium
I USE THIS ONE ALL BLACK http://www.amazon.com/Black-Hybrid-R...7828950&sr=8-3
I'm definitely gonna buy a new back cover - http://cnn.cn/shop/motorola-mb860-atrix-blue-silicone-case-p-11666.html and most probably also the seido case - http://www.amazon.com/Seidio-CSK3MT..._1_5?s=wireless&ie=UTF8&qid=1317897936&sr=1-5
just a couple of more questions:
Will the seido case work with the docking station?
Which screen protector should i get as well?
Personally I just bought an oem battery door from ebay and it fits perfect, with less creaking than my old one. Plus I purchased a tpu case from ebay also, I always go with these tpu cases as they are lightweight and protect from major falls. Dropped my inc-s which had one from about 4 feet onto concrete and not a single mark was left on the phone. Hope this helps.
Sorry if I sounds like an idiot, kinda new to posting
I still prefer the old flip leather case I used with my HTCs with windows mobile. Good times...
e07015 said:
I got this one at Radio Shack and so far I like it. Seems to give the phone a little protection and does not add too much to the phone. It was only about $9.00.
Incipio MT-106 Feather Case for Motorola Atrix 4G - Matte Black
Click to expand...
Click to collapse
To be honest, I love the aesthetics of this case; however, I dislike it very much right now.
I recently dropped my phone as I was getting out of my car. It's not a high car. I saw the phone hit the ground, the case flew off, and then my phone hit the ground again.
Now, my once pristine phone has deep scratches on all 4 corners.
Sad times.
Sent from my MB860 using XDA App
New dilemma
Ok now after all of my case searching these are the two choices that i have:
An Incipio Feather Case and Zagg Screen Protector
or
An Incipio SILICRYLIC-Hard-Shell-Case-with-Silicone-Core
Which one should i get now?
btw i couldnt get what i said i was getting before cause they do not deliver to Pakistan but Incipio and Zagg do from their official websites
get the Otterbox Commuter
Dont really like the Otterbox commuter...what about the two cases that i stated before? Which one of those should i get?
Pwersonally, I would go for the 'Clear Protector' instead of Zagg... I have tried both and found the 'clear' a smarter fit.
As for the cover, it is up to you. Trial and erorr no doubt. I have the mesh cover which fits well (http://www.ebay.co.uk/itm/new-Hard-..._MobilePhonesCasesPouches&hash=item53e8938ff1) and provides protection.
I prefer Martin Fields than Zagg. They seem comparable in protection but Martin Fields has no orange peel yet has anti glare and also A LOT easier to 'install' on your phone.
I just got my atrix but i dont like the plastic cover. I had desire to this point and i am looking for a case which has that kind of feel like desire.
I would really appreciate any help
Has anyone tried this case? What are your opinions on it. The only thing I feel is lacking is a kickstand to angle your tablet towards you, like the journal/portfolio type cases do.anyone haves solution for this? Or know of a case similar to the aegis that will do what I'm describing?
http://www.goodandevo.net/2011/09/review-trident-aegis-case-for-the-htc-evo-view-4g.html
I've. Read that review. Its one thing to read a review written after one day's use and another to hear the opinion of someone who's been using it for a while.
But I'm still looking for a similar kind of case with a kick stand.
I have one and I really like it. I love the detachable stylus holder. I can remove it when I want to game or otherwise use the tablet in landscape mode. It does offer good protection.
How much bulk does it add? Does it collect a lot of dust?
I ordered one and I should be getting it today or tomorrow. I'll update this thread with a quick opinion soon.
Sent from my HTC Sensation 4G using xda premium
I posted a long reply with a link to a picture I took of the case and when I posted, told me I can't post links yet and nuked my whole reply..
(Ok, had some food and time to retype my post)
I've been using one for about a month now, I tried a few of the protective "hard use" cases out there hunting for the most protection I could find for my View but had no luck till I found the Aegis.
Overall its been great, I'm ultimately waiting for the Defender from Otterbox to come out as I need the most protection I can get for my device but this will do nicely till then for the most part.
They did a good job of of making the case fit the Evo View tightly, making for a pretty svelte case for the amount of protection it gives.
One small thing about the fit, the bottom lip of the silicon part catches on things sometimes and has developed a tiny bit of sag because of it but it's nothing major. I can't post links yet but if you look at the pic I posted at umf dot net/View/View_Aegis.jpg you can see the slight sag in the rubber part along the bottom edge of the screen (hope the pictures not too blurry)
As far as smudges, its held up pretty well on the rubber parts, some smudging but most of it "rubs" out with my finger if I really wanted to clean it. The hard plastic parts of course look pretty much new but then again I put the device
inside a small Maxpedition pouch before throwing into my pack so I don't exactly "abuse" the case.
So all in all, while its not Defender or Ballistic HC level of protection, for the minimal bulk it adds it's still a very sturdy case and works great for "around town" I still plan to purchase a Defender case for "in the field" type activities (hopefully Pelican or Otterbox will come up with a water/crush proof case to fit 7" tablets into for more "extreme" activities) but I am very satisfied with the Aegis as well and will continue to use it whenever I don't need that ultra level of protection (or bulk) that the Defender will provide.
Hope this helps!
m00nelph said:
(Ok, had some food and time to retype my post)
I've been using one for about a month now, I tried a few of the protective "hard use" cases out there hunting for the most protection I could find for my View but had no luck till I found the Aegis.
Overall its been great, I'm ultimately waiting for the Defender from Otterbox to come out as I need the most protection I can get for my device but this will do nicely till then for the most part.
They did a good job of of making the case fit the Evo View tightly, making for a pretty svelte case for the amount of protection it gives.
One small thing about the fit, the bottom lip of the silicon part catches on things sometimes and has developed a tiny bit of sag because of it but it's nothing major. I can't post links yet but if you look at the pic I posted at umf dot net/View/View_Aegis.jpg you can see the slight sag in the rubber part along the bottom edge of the screen (hope the pictures not too blurry)
As far as smudges, its held up pretty well on the rubber parts, some smudging but most of it "rubs" out with my finger if I really wanted to clean it. The hard plastic parts of course look pretty much new but then again I put the device
inside a small Maxpedition pouch before throwing into my pack so I don't exactly "abuse" the case.
So all in all, while its not Defender or Ballistic HC level of protection, for the minimal bulk it adds it's still a very sturdy case and works great for "around town" I still plan to purchase a Defender case for "in the field" type activities (hopefully Pelican or Otterbox will come up with a water/crush proof case to fit 7" tablets into for more "extreme" activities) but I am very satisfied with the Aegis as well and will continue to use it whenever I don't need that ultra level of protection (or bulk) that the Defender will provide.
Hope this helps!
Click to expand...
Click to collapse
Thanks a lot! I acutally ordered mine a few days ago, and I expect it to come tomorrow. I'm replacing this leather folio case for the Aegis. One thing I will really miss is the flap that covers the screen as well as the ability to have the tablet angled up like a stand. Its very convenient when I'm reading at a desk or watching a movie.
Yea I guess that's the main reason I still kinda baby the View while in the Aegis case, the screen feels vulnerable. A hard plastic cover that snapped on the front that also somehow snapped on the back and provided a kickstand would pretty much cover all the bases.
I just ordered one, should be here tomorrow. Got tired of waiting for Otterbox to get their **** together. Would love to see Ballistic make a case for it, but they probably wouldn't see a return on the investment of case design and manufacture for this tablet.
Got it!! It's a little fiddley around the volume and power buttons, but once you get that worked out, it's not a bad case!
yea I posted on both Otter and Ballistics Fb pages and at first both said no, was happy to see Otter decide to make a defender but yea, a Ballistic HC style case is what I would really like so I can just toss it in my pack without a second thought.
I have a Trident case and it is OK...not as heavy duty as a Kraken case or even a Cyclops but my 5 year old stood on it and has tossed it around a bit on the carpet and it has been fine. Was I upset? Yes! The case is more for protecting against scratches and light bumps....not for a little rockstar in the making!
I own the aegis case and it's nice. Keeps my device safe and i paid $25 for it from Amazon. Looking forward to a defender series but in no hurry now
Sent from my Nexus S 4G using XDA App
I was hoping for a Cyclops series Trident case but since Aegis is all they offer I grabbed it from amazon for $25 and I'm pretty happy with it.
It was a bit of a pain to get the hard plastic shell over the silicone case (I entered hboot several times) but since I've had it on, I really like it. I just wish they didn't leave that bit of an exposed area if you don't use the stylus mount.
I was between the army green, red or cyan blue, and went with the cyan blue. I like the contrast, and it looks great.
Good
thanks but plz learn me
Hey guys,
Been using my DNA for the past year without a case and finally cracked the screen. Needless to say, after I repair it I'll be getting a case.
My issue is, most of the cases I see for the DNA are either downright ugly, or add a lot of bulk to the phone. I love how slim it is without a case, but obviously, with my clumsy hands should get one for protection purposes.
So, what cases are you guys using?
I currently have a generic wannabe case. It's got a plastic snap on cover, then a rubber casing around that. It's similar to what I'm getting. I had a Seidio case for my Thunderbolt, and was pleased to find they make the same thing for the DNA. They call it "Dilex" now. But you can get it on Ebay for 10 bucks less than Amazon as the "Active" case. It has a two-piece plastic cover, then a rubber cover, then an exoskeleton. AND it has a kickstand. I loved my Tbolt kickstand. I had my Tbolt for 3 years and it stayed in outstanding condition using the Seidio. I'm definitely a repeat customer.
Here's Seidio's page about the case:
http://www.seidioonline.com/seidio-htc-droid-dna-dilex-s/8532.htm
On Amazon, the price varies from like 28 bucks to 35 depending on color.
http://www.amazon.com/Seidio-CSK3HTDDAK-GR-DILEX-Metal-Kickstand/dp/B00B1N08MA
Here it is on Ebay:
http://www.ebay.com/itm/Seidio-Acti...t=US_Cell_Phone_PDA_Cases&hash=item485093fbbf
If you find a difference between the "Dilex", and "Active", feel free to educate me. I haven't found a difference yet. I just figured Active was the old name.
tstorm004 said:
Hey guys,
Been using my DNA for the past year without a case and finally cracked the screen. Needless to say, after I repair it I'll be getting a case.
My issue is, most of the cases I see for the DNA are either downright ugly, or add a lot of bulk to the phone. I love how slim it is without a case, but obviously, with my clumsy hands should get one for protection purposes.
So, what cases are you guys using?
Click to expand...
Click to collapse
mdphoenix said:
I currently have a generic wannabe case. It's got a plastic snap on cover, then a rubber casing around that. It's similar to what I'm getting. I had a Seidio case for my Thunderbolt, and was pleased to find they make the same thing for the DNA. They call it "Dilex" now. But you can get it on Ebay for 10 bucks less than Amazon as the "Active" case. It has a two-piece plastic cover, then a rubber cover, then an exoskeleton. AND it has a kickstand. I loved my Tbolt kickstand. I had my Tbolt for 3 years and it stayed in outstanding condition using the Seidio. I'm definitely a repeat customer.
Here's Seidio's page about the case:
http://www.seidioonline.com/seidio-htc-droid-dna-dilex-s/8532.htm
On Amazon, the price varies from like 28 bucks to 35 depending on color.
http://www.amazon.com/Seidio-CSK3HTDDAK-GR-DILEX-Metal-Kickstand/dp/B00B1N08MA
Here it is on Ebay:
http://www.ebay.com/itm/Seidio-Acti...t=US_Cell_Phone_PDA_Cases&hash=item485093fbbf
If you find a difference between the "Dilex", and "Active", feel free to educate me. I haven't found a difference yet. I just figured Active was the old name.
Click to expand...
Click to collapse
I have a red Seidio Active (silver kickstand) that I've had since the 3rd day after I got my DNA and it's great. My only complaint is it does feel a little thick and I only use the kickstand as a novelty. It can't reach the wireless charger when propped up and I don't need to charge it other than overnight when I'm sleeping. I had a UAG on my Galaxy S3 and I desperately wish they had a version for the DNA as it offered the same protection but wasn't quite as bulky. The Seidio is top quality though.
Otterbox commuter series, I've been using them for 4 years now and no broken phones or no cracked anythings
Hard thin shell on the outside with a nice durable silicon/rubber on the inside (better IMO that the defender series cases) cost is around 35-40$ however if it breaks (which is extremely unlikely) just take a pic of the broken case and they send you a new one no charge AFAIK
Never needed to get a replacement as these are solid quality cases can't go wrong with otterbox
Sent from my HTC6435LVW using XDA Premium HD app
I have been using the diztronic case for over a year and it doesn't add a lot of bulk its basically a tpu case but has a matte finish. I like it and I tried the otter box defender case but it was so bulky I went back. I think its one of the better cases if you want something without bulk but I would think the screen would crack if the phone took a direct hit on the screen. Though I haven't had any cracks with it after a year and I drop my phone every now and then.
Sent from my Nexus 7 using XDA Premium 4 mobile app
This is not much help, but hopefully you can go another year "naked". I have no case on my phone and love it. My wife has an S4 with a case (I forget the brand, but it has the rubber and then the hard plastic over it), and I think her phone is bulky.
Coming from a Droid 2, 3, and 4, most anything smaller that a 2x4 is small but the DNA has spoiled me.
I have cracked screens with and without a case. Currently naked and love it!
I use an Incipio Dual Pro. I love it.
I use the seido surface. Its raised a little bit above the screen which makes me a little less worried if I drop it, although it's still not as protected as it would be with something like an otterbox. It doesn't add any bulk to the phone, and doesn't ruin the shape of the phone so it looks almost the same as it does with the case off. I would just use the phone naked but it just feels like it's going to slip right out of my hand when I do that.
Sent from my Droid DNA using Tapatalk
I'm using the Seidio Surface too, I love the case, slim, doesn't add bulk, I have drop it a few times and screen still intact, plus the case has a polycarbonate feel, feel great on hand.
I use a otterbox defender and it is kind of bulky; but I am a metal roof salesman and use my phone extensively for work; pictures, pitch guage, ect... If my phone gets dropped on, or off, a roof it's chances of breaking are very high. I like the belt clip as well.
I use the Sedio Dilex with the built in kickstand. I miss my Thunderbolt, hahaha. Seriously solid case. :good:
FYI, you might find better/more info in the Accessories Forum..
Personally I am using the BodyGlove Dropsuit. It is inexpensive, thin, and seems to protect pretty well. I have dropped my DNA a few times, even once right on the corner on hard tile, and I don't have a scratch..
http://forum.xda-developers.com/showthread.php?t=2321473
max protection
I use a otterbox defender and it is kind of bulky; but I am a metal roof salesman and use my phone extensively for work; pictures, pitch guage, ect... If my phone gets dropped on, or off, a roof it's chances of breaking are very high. I like the belt clip as well. My last phone fell two stories to concrete and because of the otterbox defender it suffered no damage. If your job is not so dangerous I recommend the commuter series by otterbox. It is much slimmer and provides protection very well.
I use the imak snap on hard plastic case, open top and bottom.. A phone this sleek and sexy shouldn't be hidden under a huge monster truck tire , otterbox-type case.... Eww
I had the worst for about 8hrs
Skinomi TechSkin
I didn't read the fine print, all it was is a 15$slippery sticker.. I think I'm gonna get the seido a few are mentioning.. just got a warranty replacement, the ear piece was blown, I figure it's someone here's old one
Æaa\../
Got myself a Ballistic from Amazon, it's not bad
I've used seidio surface, and a low cost s-line case. I now use the body glove DropSuit. :good:
I was using seidio surface, now rocking a diztronic and love it
Sent from my HTC6435LVW using xda app-developers app
I use a Otterbox commuter, but now I switched to nothing since I really hate the feel of the bulkiness