Has anyone tried this case? What are your opinions on it. The only thing I feel is lacking is a kickstand to angle your tablet towards you, like the journal/portfolio type cases do.anyone haves solution for this? Or know of a case similar to the aegis that will do what I'm describing?
http://www.goodandevo.net/2011/09/review-trident-aegis-case-for-the-htc-evo-view-4g.html
I've. Read that review. Its one thing to read a review written after one day's use and another to hear the opinion of someone who's been using it for a while.
But I'm still looking for a similar kind of case with a kick stand.
I have one and I really like it. I love the detachable stylus holder. I can remove it when I want to game or otherwise use the tablet in landscape mode. It does offer good protection.
How much bulk does it add? Does it collect a lot of dust?
I ordered one and I should be getting it today or tomorrow. I'll update this thread with a quick opinion soon.
Sent from my HTC Sensation 4G using xda premium
I posted a long reply with a link to a picture I took of the case and when I posted, told me I can't post links yet and nuked my whole reply..
(Ok, had some food and time to retype my post)
I've been using one for about a month now, I tried a few of the protective "hard use" cases out there hunting for the most protection I could find for my View but had no luck till I found the Aegis.
Overall its been great, I'm ultimately waiting for the Defender from Otterbox to come out as I need the most protection I can get for my device but this will do nicely till then for the most part.
They did a good job of of making the case fit the Evo View tightly, making for a pretty svelte case for the amount of protection it gives.
One small thing about the fit, the bottom lip of the silicon part catches on things sometimes and has developed a tiny bit of sag because of it but it's nothing major. I can't post links yet but if you look at the pic I posted at umf dot net/View/View_Aegis.jpg you can see the slight sag in the rubber part along the bottom edge of the screen (hope the pictures not too blurry)
As far as smudges, its held up pretty well on the rubber parts, some smudging but most of it "rubs" out with my finger if I really wanted to clean it. The hard plastic parts of course look pretty much new but then again I put the device
inside a small Maxpedition pouch before throwing into my pack so I don't exactly "abuse" the case.
So all in all, while its not Defender or Ballistic HC level of protection, for the minimal bulk it adds it's still a very sturdy case and works great for "around town" I still plan to purchase a Defender case for "in the field" type activities (hopefully Pelican or Otterbox will come up with a water/crush proof case to fit 7" tablets into for more "extreme" activities) but I am very satisfied with the Aegis as well and will continue to use it whenever I don't need that ultra level of protection (or bulk) that the Defender will provide.
Hope this helps!
m00nelph said:
(Ok, had some food and time to retype my post)
I've been using one for about a month now, I tried a few of the protective "hard use" cases out there hunting for the most protection I could find for my View but had no luck till I found the Aegis.
Overall its been great, I'm ultimately waiting for the Defender from Otterbox to come out as I need the most protection I can get for my device but this will do nicely till then for the most part.
They did a good job of of making the case fit the Evo View tightly, making for a pretty svelte case for the amount of protection it gives.
One small thing about the fit, the bottom lip of the silicon part catches on things sometimes and has developed a tiny bit of sag because of it but it's nothing major. I can't post links yet but if you look at the pic I posted at umf dot net/View/View_Aegis.jpg you can see the slight sag in the rubber part along the bottom edge of the screen (hope the pictures not too blurry)
As far as smudges, its held up pretty well on the rubber parts, some smudging but most of it "rubs" out with my finger if I really wanted to clean it. The hard plastic parts of course look pretty much new but then again I put the device
inside a small Maxpedition pouch before throwing into my pack so I don't exactly "abuse" the case.
So all in all, while its not Defender or Ballistic HC level of protection, for the minimal bulk it adds it's still a very sturdy case and works great for "around town" I still plan to purchase a Defender case for "in the field" type activities (hopefully Pelican or Otterbox will come up with a water/crush proof case to fit 7" tablets into for more "extreme" activities) but I am very satisfied with the Aegis as well and will continue to use it whenever I don't need that ultra level of protection (or bulk) that the Defender will provide.
Hope this helps!
Click to expand...
Click to collapse
Thanks a lot! I acutally ordered mine a few days ago, and I expect it to come tomorrow. I'm replacing this leather folio case for the Aegis. One thing I will really miss is the flap that covers the screen as well as the ability to have the tablet angled up like a stand. Its very convenient when I'm reading at a desk or watching a movie.
Yea I guess that's the main reason I still kinda baby the View while in the Aegis case, the screen feels vulnerable. A hard plastic cover that snapped on the front that also somehow snapped on the back and provided a kickstand would pretty much cover all the bases.
I just ordered one, should be here tomorrow. Got tired of waiting for Otterbox to get their **** together. Would love to see Ballistic make a case for it, but they probably wouldn't see a return on the investment of case design and manufacture for this tablet.
Got it!! It's a little fiddley around the volume and power buttons, but once you get that worked out, it's not a bad case!
yea I posted on both Otter and Ballistics Fb pages and at first both said no, was happy to see Otter decide to make a defender but yea, a Ballistic HC style case is what I would really like so I can just toss it in my pack without a second thought.
I have a Trident case and it is OK...not as heavy duty as a Kraken case or even a Cyclops but my 5 year old stood on it and has tossed it around a bit on the carpet and it has been fine. Was I upset? Yes! The case is more for protecting against scratches and light bumps....not for a little rockstar in the making!
I own the aegis case and it's nice. Keeps my device safe and i paid $25 for it from Amazon. Looking forward to a defender series but in no hurry now
Sent from my Nexus S 4G using XDA App
I was hoping for a Cyclops series Trident case but since Aegis is all they offer I grabbed it from amazon for $25 and I'm pretty happy with it.
It was a bit of a pain to get the hard plastic shell over the silicone case (I entered hboot several times) but since I've had it on, I really like it. I just wish they didn't leave that bit of an exposed area if you don't use the stylus mount.
I was between the army green, red or cyan blue, and went with the cyan blue. I like the contrast, and it looks great.
Good
thanks but plz learn me
Related
Just wanted to see if anyone has any of the Case Mate series cases for the Evo 3d? I was thinking about getting the Tough case, but from a video review on youtube, the case apparently has a random port on the bottom...
http://www.youtube.com/watch?v=mskLfmXEh0Y
Where I have found them online:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28094#section10
http://www.wirelessground.com/htc-e...3d-case-mate-tough-case-black&channelid=FROOG
Currently have the Defender, but DAMN its bulky
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
mattfmartin said:
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Please fill me in lol
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
HTCRALEIGHFAN said:
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Maybe I will have to reconsider, I would still like to see some more people weigh in. I have the OB Defender right now, and its excellent protection wise just a bit bulky...
The convert from seidio/BB is pretty awesome two good cases plus a nice clip. This is until I can get the ballistic case
Sent from my PG86100 using Tapatalk
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, no interference with function or sensitivity at all.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
I have the casemate "barely there" case on my OG Evo. I have been using it since shortly after launch and it has been just the right amount of protection without adding a lot of bulk. I keep my phone in a pocket with nothing else so that case helps with day to day wear and more importantly it makes it so the camera glass doesn't touch the table when the phone is laying on its back.
I am thinking of picking up an Evo 3d for my girlfriend in order to replace her dying palm Pre but she is pretty rough on phones. She drops hers a lot and throws it in her purse with keys and change and stuff. The thought of getting her a "glass slab" style phone frightens me. I will probably pick up a barely-there case for the Evo 3d if I get it for her. It's weird that they don't list them on their site but that mobilecity site seems to have them in a few colors for $15. That's a good price IMO and my last one came with a free screen protector. Hopefully that will be enough to protect her phone.
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
po96od said:
The case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other. I don't know why those are there, but they don't do any harm.
Click to expand...
Click to collapse
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
minieod said:
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
Click to expand...
Click to collapse
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
#Winning# said:
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
Click to expand...
Click to collapse
hey sorry, my PM notifications are not working i guess
i am going to take some pics of mine now and post here
(note: these pics were taken on an Evo3D)
http://imgur.com/a/cCdel
neodorian said:
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
Click to expand...
Click to collapse
get the 3d on her plan...swap the 3d to your number, and your evo to hers....at that time you both have two new activated phones...both are now eligible for the TEP
also, now you will have a 3d
minieod, nice pics. I was meaning to post some, but you were way more completist about it than I would've been.
The mystery hole at the bottom is for a lanyard.
i wish it would come with a holster
Phreddo said:
The mystery hole at the bottom is for a lanyard.
Click to expand...
Click to collapse
lol
no...its the microphone...when your mouth makes noise, that noise goes into that hole
po96od said:
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, since the TPU case I was initially using basically disabled it.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
Click to expand...
Click to collapse
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
mrazzino said:
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
Click to expand...
Click to collapse
eep - its on amazon for $30 + free shipping (which is free returns)
Anyone know if either the tough case or the barely there case will fit into the belt holster for the Seido Surface case(aka the plaitunum case at Best Buy)?
I'm currently using a TPU case in the Platinum holster because I like the added camera area coverage of the TPU case. I just hate the camera button covering of the TPU case.
The Case Mate cases look great but I really need a belt clip with them.
the wifes casemate shipped yesterday and will be here this weekend ill toss up pics
Sent from my PC36100 using XDA Premium App
So I wanted to start out this review by saying, that when I originally bought my Evo 3D, I had purchased an Otterbox case which they sell at Sprint for it as well. I am a bit neurotic when it comes to my phones and always have to have them protected. I had the Otterbox on till the day I received my Seidio Active case from the great people of Seidio to try out. To be honest, I was actually going to use the Seidio case for a week and then go back to the Otterbox, but actually I just got back from Sprint, I just returned the Otterbox.
I have to say that in my opinion this Seidio case has the Otterbox beat hands down. The grooves that the Active case has for your fingers and the material they use for the silicone underlay just feel better. I compared the Otterbox to the Active case and when it comes to size, the Otterbox in my views is bigger and bulkier, but it seems that the Seidio case more protection. The silicone on the Otterbox feels like its half the amount used on the Active case, it’s a flimsier feel then Seidio’s. Now you would think because the Seidio case is smaller, it would give you less protection, but I feel that my phone is much more protected.
Another benefit with the size of the Seidio Active case, is that it feels much better in the pocket, however with both phones there is a bit of resistance when taking it from the pocket due to the silicone, but it happens with all silicone based cases. The only real downside I have seen with the Active case when using it for the past couple of days is that the silicone attracts lent from your pocket, but can easily removed with a wipe of a cloth.
The main thing that I am happy about, and have read in other reviews of the case is the protection the case provides to the camera. I had recently bought a TPU case from online and returned it immediately after seeing that the case lined perfectly with the camera casing, leaving it open to scratches and marks.
Another big thing that is a benefit with this case, compared to the Otterbox, is that all the cut outs for the power button and charging ports line up perfectly. I noticed that on the headphone jack on my Otterbox it was cut out incorrectly leaving me to have to jam the headphone jack into place. Not with the Active case, everything lines up perfectly. The silicone is cut to an exact precision. I know that the ports don’t have a cover like the Otterbox, but I actually prefer this, its an easy access and most of the time, I am prepared for those covers to break off in time, giving the phone a cheap look.
I know that some are disappointed that the case doesn’t come with a built in screen protector like the Otterbox but not I. I love that it doesn’t, I feel that the built in protectors have a more rubbery feel to them then other protectors. I would personally recommend the Screen Guards from Seidio; they are smooth like glass and fit to a tee.
In an overall judgment I give the phone a 10/10. There is not one thing I would change about this case, I love it more then anything. It looks great and feels even better. I would highly recommend this case to anyone who is in the market for a new case. Not only are you buying a great case, you are buying it from a great company that is willing to go that extra mile and help you out when it is needed, whether it is a return or replacement, and this type of customer service just gives me that little extra push to buy Seidio then any other company.
Looks just like the Innocase Rugged( minus the inner 2-piece hard shell) that I used on my Evo 4G before going to the Ballistic HC. How much is this case and who all sells it? Hope to be getting my 3D in the next couple weeks and may just get this case to go on it. My Innocase Rugged held up great, just replaced it with the Ballistic HC based on looks....
Still torn though honestly, I like the fact that the Otterbox covers the camera area better
Sent from my PC36100 using XDA Premium App
Matty Mo said:
So I wanted to start out this review by saying, that when I originally bought my Evo 3D, I had purchased an Otterbox case which they sell at Sprint for it as well. I am a bit neurotic when it comes to my phones and always have to have them protected. I had the Otterbox on till the day I received my Seidio Active case from the great people of Seidio to try out. To be honest, I was actually going to use the Seidio case for a week and then go back to the Otterbox, but actually I just got back from Sprint, I just returned the Otterbox.
I have to say that in my opinion this Seidio case has the Otterbox beat hands down. The grooves that the Active case has for your fingers and the material they use for the silicone underlay just feel better. I compared the Otterbox to the Active case and when it comes to size, the Otterbox in my views is bigger and bulkier, but it seems that the Seidio case more protection. The silicone on the Otterbox feels like its half the amount used on the Active case, it’s a flimsier feel then Seidio’s. Now you would think because the Seidio case is smaller, it would give you less protection, but I feel that my phone is much more protected.
Another benefit with the size of the Seidio Active case, is that it feels much better in the pocket, however with both phones there is a bit of resistance when taking it from the pocket due to the silicone, but it happens with all silicone based cases. The only real downside I have seen with the Active case when using it for the past couple of days is that the silicone attracts lent from your pocket, but can easily removed with a wipe of a cloth.
The main thing that I am happy about, and have read in other reviews of the case is the protection the case provides to the camera. I had recently bought a TPU case from online and returned it immediately after seeing that the case lined perfectly with the camera casing, leaving it open to scratches and marks.
Another big thing that is a benefit with this case, compared to the Otterbox, is that all the cut outs for the power button and charging ports line up perfectly. I noticed that on the headphone jack on my Otterbox it was cut out incorrectly leaving me to have to jam the headphone jack into place. Not with the Active case, everything lines up perfectly. The silicone is cut to an exact precision. I know that the ports don’t have a cover like the Otterbox, but I actually prefer this, its an easy access and most of the time, I am prepared for those covers to break off in time, giving the phone a cheap look.
I know that some are disappointed that the case doesn’t come with a built in screen protector like the Otterbox but not I. I love that it doesn’t, I feel that the built in protectors have a more rubbery feel to them then other protectors. I would personally recommend the Screen Guards from Seidio; they are smooth like glass and fit to a tee.
In an overall judgment I give the phone a 10/10. There is not one thing I would change about this case, I love it more then anything. It looks great and feels even better. I would highly recommend this case to anyone who is in the market for a new case. Not only are you buying a great case, you are buying it from a great company that is willing to go that extra mile and help you out when it is needed, whether it is a return or replacement, and this type of customer service just gives me that little extra push to buy Seidio then any other company.
Click to expand...
Click to collapse
Looks nice man love the otter box defender keeps the ports covered . I was thinking about the convert combo looks cool tho heard bad things about the rebrand from breast buy folks said it was cheap feel and broke at times for folks camera flap was kinda gay folks were sayin it had a bad feel .
If u test the convert combo out let me know to me the otter box defender looks way and feels better then what breast buy has out sexy and smooth.
When trident and ballistic come out with the kraken and aegis from trident will be sweet and the tank from ballistic will be sweet .
Yeah, i like the port covers but on the otterbox case i had for less then a week, the port covers already started to rip before returning it which is a downside... thats why i like having no port covers, its in preparation of when it does fall off!
and just so you know, this is the Active Case, made by Seidio.
Agree 100% with OP. Returned Otterbox Defender (too bulky, hard to type) returned Otterbox Commuter (felt thin, cheap, low quality, rubber not tight)
Bought Seido rebranded as Platinum from Bestbuy same as OP (except mine is black rubber with white back.) Rubber is almost TWICE as thick as Otterbox, way tighter on phone and just feels much much better. Better grip, better weight (and +1 on appearance)
it was $37.88 at bestbuy, same price as my Otterbox commuter refund.
Totally satisfied, would recommend 100%, would buy this PT/Seido again tomorrow if I had to.
Edit...and no power slot cover which is a +1 since it eliminates the extra step pain in the a.. and seemed unnecessary anyway. Can of aerosol air blast removes and dust or lint from that port in 2 seconds
...nice upgrade from hero
I'm a Seidio fan.
The only problem I ever saw personally with the active case was the corner pieces breaking easily. I had a couple of them and experienced the same problem. Otherwise...nice case.
I just recently got my 3vo and i need a case for it, never been a big fan of the otterboxes (just seem too bulky). I need a case that looks good and gives some protection.. i have a 2 year old that loves to play with my phone.. But im not sure what to get.. I dont work in construction or take my phone on any extreme sports, but i do forget my phone on my lap in the car all the time and go to get out and boom it hits the ground.. so i do need some protection..
So far this is the one im likeing
http://www.seidioonline.com/product-p/csk3hev3d-wh.htm
If you have a Best Buy near you, you can go there an try on some cases. They carry the one you posted too.
I had that case for my Evo 4G and I liked it a lot. Very nice case. The ones at Best Buy are named Pt, but they are made ny Seidio for Best Buy. Same exact case, just a different name stamped on it.
Sent from my PG86100 using XDA Premium App
The casemate tough case is pretty nice. It's not super big like the defender but its not slim either. But it looks nice, fits great and protects well. I got mine off ebay for about 22 bucks new. Well worth it. I also have the seidio active but prefer the tough case and haven't taken it off for the last 2 weeks or so except to clean it.
Sent from my PG86100 using XDA App
I'm still waiting for the Ballistic Case for the Evo 3D to make its appearance on their website; waiting on the HC version.
The CaseMate's look pretty good as well. I've seen good reviews for the Tough Case that they make.
However, SLM is correct. Go try out the Platinum cases at Best Buy before you take the plunge with the Seidio case. It costs $34.99 at Best Buy for the same Seidio one you're interested in.
I'll tell you from experience that I have the Platinum case (a.k.a. a rebranded version of the Seido Active case), and it's pretty sweet! Rumor has it that Best Buy will also be getting the Seidio 1900 mAh batteries as well, but they'll too be rebranded as Platinum. The case I got is excellent and slimmer than the Otterbox cases. It comes in two pieces. You have a silicone sleeve with a felt-like interior that wraps around the phone, and then you have a strong plastic skeleton that wraps around the sleeve. Although the case is great, there are a few things that I don't like about it. For one, if you keep your phone in your pocket like me, you'll start to notice pocket lint collect around the edges of the case. Also, it's sometimes hard to press buttons around the edges of the phone. For example, I use Swype, and when I have to manually type in a word instead of swiping, it can be difficult pressing letters such as P or A. I'll accidentally hit the O or S keys. But it does offer damn good protection. I've gotten so accustomed to the case that it's just weird to hold the phone without it. The case also protects the dual cameras in the back. I have no clue why HTC decided to have the cameras stick out, but this case offers protection for them. As far as my pocket lint issue goes, I think I might invest in a holster for the phone. I'm not sure if Best Buy sells the Platinum branded holster that is compatible with the Active case, but I'll look sometime this week and let you know. I use my phone as my primary music player, whether it's mp3s stored on the phone, FM radio, or Internet radio, and I think that having it on my hip instead of my pocket will be a little bit more convenient for me.
As far as cases go, I've only seen the Platinum case with the black skeleton being sold at Best Buy. Seido sells their Active case with different colored skeletons, but the sleeve still remains black. I'm kinda disappointed Best Buy didn't sell the burgundy skeleton. I think it would've looked nice on this phone (I'm a fan of dark red colors.). If you want something more rugged, Seido sells on their website the Surface case (a hard two piece plastic shell available with or without a kickstand) and the Convert case. If you plan on drunkenly abusing your phone or chunking your phone at the wall after a pissed off conversation, I recommend the Convert case. It's like a combination of the Active and Surface cases. The inner layer is the Surface case, and then it's wrapped with a silicone sleeve and skeleton like the Active case. It also has a detachable cover for the rear cameras. To top it all off, the Convert case comes with a precision-cut screen guard. I don't really need all that thickness and protection, but I would put money down that the Convert case holds up to its name. If you plan on getting an extended battery though, make sure you get an extended case since the regular cases won't fit with the extended battery door.
Anyway, I hope this helps. Good luck shopping for the right case!
I bought a silicon case with the wave. Protects camera, wich had to be protected since it sticks out. Also protects the other buttons and seems to fit well...
Its only 1,50 dollar so thats not a bad deal.
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Only one downside, almost every 3vo owner has it
Red Body Glove case
I have the Body Glove case in red, and I like it a lot. It is a nice looking case.
I have no issues with mine unlike some others, but check out the pictures here:
http://forum.xda-developers.com/showthread.php?t=1141005
The available colors are Red, Blue, Gray, Silver, and maybe White too.
Thank for the info guys im going to head to beat buy today and check it out..
butterbuns said:
Thank for the info guys im going to head to beat buy today and check it out..
Click to expand...
Click to collapse
Sounds good, let us know what you decide. Bhambalek said they only have the black skeleton shell at his Best Buy. My local Best Buy only had them in white. Maybe yours will have both so you'll have options. Good luck!
Sent from my PG86100 using XDA Premium App
Just unpacked and put on my Seidio Active with holster, got the saphire blue from Versio Mobile on Amazon, 34.49 shipped.
Very nice case, fits very snug, like the inner skin and outer skeleton, holster is very solid. Only complaint, that the camera glass is not protected; probably order a carbon skin so I can throw some protection on that glass. Had a TPU on her since day one and glad I upgraded to this one.
Delano.888 said:
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Click to expand...
Click to collapse
I also like and recommend the TPU Skin Cover Phone Case for HTC Evo 3D http://www.amazon.com/TPU-Cases-Flexible-Sprint-Retail-Packaging/dp/B0053NWDO0
I have the Sedio Surface case and am happy with it. Decent protection and it has a kickstand also.
I posted a review on sprintusers, but dont know the policy here about linking to other forums.
i picked up the PT Cruiser case yesterday, i was able to get the black and white one that i liked.. Now i first off the bat i really like the look and feel of the case, but i dont like how the phone fits in the rubber sleeve, its not a real snug fit. So i can see pocket lint and other things easily able to get inbetween the phone and the rubber side, but other then that i like it so far.. Its still a lil early to make a final decision on the case..
But again thanks for everyones responces, i have to say this site really does rock!!
one word: otterbox defender. Ok so that was 2 words.
I have four requirements:
(1) Decent protection all around except for screen.
(2) Protection for the camera.
(3) Must lie flat and not wobble when typing w/phone on table.
(4) Must not make the phone significantly fatter (otterbox is OUT).
Anyone have any suggestions? I actually like the gel case from Sprint but it doesn't protect the camera.
Mike
i like seidio case the best
i've tried all sorts of cases and I keep coming back to my casemate tough case, can't go wrong with that one. It's not that bulky and offers just the right amount of protection without having your phone inside a vault like the defender.
Seidio Active or Platinum Cruiser. I had the Seidio on my Evo 4G for a year. Get the holster from Seidio to prevent the lint issue and clip it inside of your pocket. Something that nobody mentioned is that the rubber bezel allows you to set the phone face down without the screen contacting. That also makes it slip resistant and prevents an unattended ringing phone from vibrating off of the desk. Not too much bulk either.
Sent from my 3vo using XDA Premium App
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
I used the Incipio Feather for a few months. I really liked the "low-profile" but it was very fragile. I ended up cracking two of them just from taking them off to do battery pulls. As far as grip goes, it was generally nice to hold but doesn't offer that much more grip then the phone by itself. I've also used the Ballistic SG and while it was too bulky for me it had excellent grip. I was able to put it on my lap, back facing down, while driving and it never moved.
Currently I use the Speck Candyshell and it holds up pretty well. Grip can become an issue if your palms get sweaty as the exterior is all hard plastic.
Maringer said:
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
Click to expand...
Click to collapse
I had the feather. After two drops on different corners, the case had cracks. I expected as much and the case did its job. I got the Incipio silicrylic case as a replacement, which has a silicon cover AND a hard cover. It's slightly bulkier than the feather, but it still looks good and is definitely more sturdy. Case is grippy but not overly grippy where you have a tough time putting the phone in your pocket. I can remove the case without fear of cracking it, unlike the feather.
I had one of the Incipio Feather's also. It lasted about 2 months before it completely fell apart. Is is a nice case and I really liked the feel and look of it and it will fit in the car dock with a little modification. But it is not rugged enough for me to recommend. I am using a TPC case now. Does the job. Easy to remove to put in my Car Dock, LapDock or Standard Dock. It feels much better than the Atrix does by itself. But it is kinda ugly. But I have dropped it a few times and it keeps my Atrix safe.
The Seidio Active was my choice and I like it a lot. Two pieces - rubber with hard shell skeleton protects it nicely.
I can remove it (to dock) in seconds and replace it quickly too. Got it at Amazon: http://www.amazon.com/gp/product/B004WKIEF2/ref=oh_o03_s00_i01_details
That's the sapphire blue one, but they have other colors.
I'm using the otterbox commuter case. I got it off of Amazon.com for only 20 bucks on Saturday. So far it's been amazing
Sent from my MB860 using XDA App
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Of all the experiences I have read about cases and their compatibility with docks, the only one that I have heard that works is the Incipio Feather (or somehting similar) when taking in the consideration of actually not removing the case.
troycarpenter said:
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Click to expand...
Click to collapse
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Yes, I have read that people just simply remove the insert that is in the docks and it fits just fine. I have seen pics before too but can't remember where I saw them. Maybe I can try to find them.
troycarpenter said:
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Click to expand...
Click to collapse
---------- Post added at 11:29 AM ---------- Previous post was at 11:16 AM ----------
Here is a thread about a mesh cover (which is essentially the Feather but with a mesh look) and the second link is a post of someone in that thread showing the Atrix in the car dock with the case on.
Thread:
http://forum.xda-developers.com/showthread.php?t=1194096
Post with pics:
http://forum.xda-developers.com/showpost.php?p=16704009&postcount=27
Here is another thread discussing (and maybe confirming) the Feather working with docks:
http://forum.xda-developers.com/showthread.php?t=982574
The Incipio feather will fit in the car dock with the cardock insert removed, but the latch wont close. It has a ridge that comes over the face of the phone, but sits on top of the feather case. It will work if you make sure you have it inserted firmly all of the way in. I take corners pretty fast and had it fall out a couple of times. I modified mine to make the latch close pretty easily. Put it in the cardock and marked the outline with a X-acto knife. Used diagonal cutters to cut the 2 short vertical cuts. Scored the Horizontal mark with the X-acto knife and snapped the piece off with some lineman pliers. Now that these are $10 apiece I am tempted to get another one (or 2). Just was not worth the 25 bucks I paid 6 months ago.
Thanks for the various comments about cases.
I've looked at the various recommended cases and think I'll probably have to give the Incipio Feather a miss if it is as fragile as others have mentioned. I'm based in the UK so I'd have to order the case from the US (can't locate a UK seller) and this would cost me the equivalent of around US $ 45.00 which is a bit too much for something which won't last long!
Various other hard cases aren't available in the UK either (or not at decent prices) and, for me, the most important thing is to have a case lacking in bulk.
The Otterbox Commuter is the only one I get can get reasonably cheaply from within the UK (about US $ 20) but I'm not taken by the look of this.
Therefore, I think I've settled on the Seidio Surface which looks to have good reviews and will hopefully be the sort of slimline case I can deal with. I can obtain this via Amazon UK from a US seller for a mere US 36.00!
Incidentally, in the monster "Ruggedized battery cover" thread, there was mention that the Seidio Surface fits the lapdock and can be easily removed for the car dock:
http://forum.xda-developers.com/showpost.php?p=16600986&postcount=379
I don't own either dock so this isn't really of relevance to me!
I started looking for a discrete case for the same reason (battery door is way too slippery.)
There were some Chinese-made rubberized battery door replacements that seemed popular a while back. Most of the mobile accessory sites that carried them sold out, though I found and ordered one on eBay. The seller seems to have more:
http://www.ebay.com/itm/Back-Cover-...ltDomain_0&hash=item415bd6c69c#ht_2880wt_1085
I just got my yesterday. Fitment is surprisingly accurate, no misaligned cutouts or anything, and the added bulk is acceptable. Feels much better in hand now, too, when typing in landscape mode. It takes a deliberate effort to free the phone from the case, as it has a couple of tabs that clip into the retaining slots used by the factory battery door. Haven't noticed it snagging or coming loose as it goes in and out of my pocket either.
edit:
I just noticed the "dock fitment" discussion going on in this thread. I can't say anything about this case + docks since I don't own any docks.
I fashioned a case out of 3M carbon vinyl wrap. Keeps that Carbon Fibre effect on the back case whilst making it much more grippy (never dropped it since) and much more aesthetically pleasing as it gives off a 3D carbon fibre effect.
I can post pics if you like
Also worth mentioning you can pick this stuff up dead cheap off eBay - http://www.ebay.co.uk/itm/30x20cm-G...arParts_SM&hash=item4cf189dd66#ht_1792wt_1163
This sheet will give you a few attempts at it. It took me 2 to get mine the way I liked it
If you are just looking for grip without affecting aesthetics the Zagg Total protection is a great option. Clear is nearly impossible to tell it is on there. It is the same material and install as the screen protector. So no residue when removed. Make sure you read/watch the install tips from Zagg. I have been using it since April without a drop.
I have; however, decided to get a case and am trying the Seidio Active. The wife got the Incipio Silicrylic. both indeed fit in the HD/Standard Dock with the insert removed, I'm curious about whether there is enough support from the back of the dock though. As mentioned, I'm guessing the car dock will not close due to the extra couple millimeters, but will try it out and reply if it does indeed work.
Well, the Seidio Surface winged its way across the Atlantic reasonably quickly and I received it earlier this week.
It is very slightly bulkier than I expected but it is still very slimline so this isn't a problem as it still fits in my pocket easily. A little more difficult to take the phone out of my pocket than previously but again, not really a problem.
The surface of case itself isn't as 'grippy' as I expected, either, but it is a great improvement to the usual slick battery cover and I haven't juggled with it yet this week! I can now operate the phone using one hand if necessary without fear that I will lose my grip and drop it.
There are a few small imperfections on the back of the case - it would seem as though there were a few specks of dust or some other substance on the case before it was covered with the rubberised coating as a few tiny bumps can be felt. Not enough of a problem for me to bother returning it all the way to the US, however!
It is slightly tricky to take the Seidio Surface off the phone - it seems to come off easily sometimes but remain stubbornly in place at others. I think I'll need to practice taking it on and off the phone a bit more until I get the knack.
Overall, I'm reasonably impressed with the case and would give it an 8/10. It would have received a higher score had it not been so ridiculously expensive for me to buy here in the UK - Amazon.com are selling it at approximately half the price I paid!
Looks like Otterbox just needs a phone to put in their just posted case.
Can't wait!
Saw one at Radio Shack 2 days ago and bought it. Waiting for the phone to go along with it. Me thinks it will be very soon, brand new Rezounds retail are down $100.00 on Ebay from just a couple of days ago.
cman6453 said:
Looks like Otterbox just needs a phone to put in their just posted case.
Click to expand...
Click to collapse
I don't know anything about otterbox and haven't heard of it before. Is it a hard shell case that does something special? Seems a little pricy.
Senryo said:
I don't know anything about otterbox and haven't heard of it before. Is it a hard shell case that does something special? Seems a little pricy.
Click to expand...
Click to collapse
It's a hard case with a rubber skin around it. It's super durable. Highly recommended.
Sent from my vivow using Tapatalk 2
I picked up the Commuter with it today and its awesome! Fits perfect and doesn't add much bulk.
Sent from my ADR6410LVW using Tapatalk 2
Do you guys find it to big? I've been looking at this or the Ballistic case but they both seem to make the phone in to a brick.
The Commuter seems like the perfect size to me. I'll take some picture in a bit so you can see.
Sent from my ADR6410LVW using Tapatalk 2
Here are some pictures of it, and ones comparing it to my mom's Razr with a Case-mate case on it in my previous post.
I've commented on the otterbox defender series case before. I've got one on my Dinc. Yes the defender series will bulk it up, with the outer hardshell and clip but guess it depends on your lifestyle. I'm a mechanic so I need something that can withstand getting dropped or inadvertantly laid on, etc.
The defender is like a brick **** house, it just doesn't get any better protection wise. The nice thing about it, is if I take the phone all the way out to just it's core size without all the protection, and wipe it down, you wouldn't know this phone was not brand new, it's mint condition, thanks to the otterbox, and it has been dropped on the otterbox at least 5 times.
The commuter series would be a lot smaller profile if that's what you are looking for....
I'm glad to see OB has their act together on this and released a case for it, it actually took them a while to release one for the og Dinc..
ohredwood said:
I've commented on the otterbox defender series case before. I've got one on my Dinc. Yes the defender series will bulk it up, with the outer hardshell and clip but guess it depends on your lifestyle. I'm a mechanic so I need something that can withstand getting dropped or inadvertantly laid on, etc.
The defender is like a brick **** house, it just doesn't get any better protection wise. The nice thing about it, is if I take the phone all the way out to just it's core size without all the protection, and wipe it down, you wouldn't know this phone was not brand new, it's mint condition, thanks to the otterbox, and it has been dropped on the otterbox at least 5 times.
The commuter series would be a lot smaller profile if that's what you are looking for....
I'm glad to see OB has their act together on this and released a case for it, it actually took them a while to release one for the og Dinc..
Click to expand...
Click to collapse
I fele ya ottebox is the best.
.. u dropped ur inc4g 5 times already
I bought the Commuter, and the fit was horrible. The hard plastic outer shell didn't securely clamp to the soft rubber inner cover, and that inner cover did not fit the phone securely. The port covers didn't lay flat either. I bought an incipio silicrylic case and it fits much better.
Wow, I really like that Incipio case, holy cow. You have anything that can take pictures of it on the phone? Would really like to see some real world pics. How soft is the inside layer? Would it be ok sliding in and out of a pocket or would it "grab" or rip over time?
It doesn't look any different than from the website. Slides into and out of pockets just fine, and I don't think it will wear over time. The included screen protector is way better than the one OtterBox packages with their case, it covers the entire front glass panel.
A62335 said:
I bought the Commuter, and the fit was horrible. The hard plastic outer shell didn't securely clamp to the soft rubber inner cover, and that inner cover did not fit the phone securely. The port covers didn't lay flat either. I bought an incipio silicrylic case and it fits much better.
Click to expand...
Click to collapse
I agree! I just got my Otterbox case in on Saturday and the fit is really bad. I have a hard time pushing the power and volume button, the rubber over top of the front camera does not lay flat, the bottom end below the soft keys does not hug the phone(kind of protrudes out), the screen protector does not cover the whole screen, and the headphones port cover does fit very well into the hard shell.
I'm very disappointed in this case and will try and return it.
I'm not a big fan of otterbox because it's too big for me. :silly: But, if I don't find that many cases, I might have to buy this one. haha
i just got me an otter box defender, and its awesome, fits perfect, it makes the phone.has it's own screen cover too.
---------- Post added at 08:02 PM ---------- Previous post was at 07:54 PM ----------
hieu2ueih said:
I agree! I just got my Otterbox case in on Saturday and the fit is really bad. I have a hard time pushing the power and volume button, the rubber over top of the front camera does not lay flat, the bottom end below the soft keys does not hug the phone(kind of protrudes out), the screen protector does not cover the whole screen, and the headphones port cover does fit very well into the hard shell.
I'm very disappointed in this case and will try and return it.
Click to expand...
Click to collapse
boy they must have given you the wrong one, mine is nothing like you discribe
I haven't used an otterbox on the Inc4, but we've got a fleet of iPhones for our salesmen at work. Every single one is in an otterbox Defender series, and trust me when i say our salesmen are extremely hard on phones. These cases have probably saved us hundreds of dollars no question.
The point of my post however is if you get one that doesn't fit quite right though i would ask for a replacement. When i was setting up all the phones and putting them into there cases i did run into a few that just didn't sit right. Looked like a manufacturing defect to me, but i was able to get replacements. That might be the issue your running into.
Void4ever
Edit: The Defender series WILL absolutely bulk up the phone though, but if you need the protection you'll find none better. I have no exp with the Commuters personally, but from the pics the size looks good.
andybones said:
I fele ya ottebox is the best.
.. u dropped ur inc4g 5 times already
Click to expand...
Click to collapse
Naaa bud, I don't have the Inc4g yet, I've got my original Dinc sealed up in the defender series.
To the latest posters, as I mentioned in my post earlier as well, I have no experience with the commuter series OB but I did have two defender series OB's that cracked a small portion of the clip/case. I think it's a weak link in the design of the case and the snapping/unsnapping of the phone in/out of the case over time that caused this. But OB themselves, have been absolutely stellar to deal with, they looked up my purchase date, no questions, shipped out new cases to me each time.
I'd call em up tell em, and maybe they sent the wrong case, maybe you got a design flaw on yours, who knows but if some of the folks using the commuter case have posted awesome fit and look, that just don't jibe with what your reaction is to your case...
I went to radio shack to try out the otterbox commuter and the defender.
The commuter was unimpressive. The fit was loose even after much working of the acrylic over the silicone to have it get into the right place. The top part that hangs over the front facing camera is kind of flappy and I can see a lot of dust getting in there. The screen protector doesn't cover up under the loose area either. The bottom part of the case barely hangs on to the bottom of the phone, not tight at all.
The defender was completely opposite, the defender was a great fit. It felt sturdy, durable and overall just comfortable (if you like the additional bulk added). The screen protector was flush with the screen and responsive. Not nearly as nice feeling as a skinomi, but still nice.
I know this is an older post but........ I just got the defender series and it really doesn't bulk up the phone that much - frankly it is pretty small in you hand without a case. Even with this case on it still fits into the side pocket of a pair of carhartts. It is worth the money.