i following this step...
Long guide (for beginners)
- Download the attached ODIN file and extract the .zip file done with odin 1.85
- Download the attached XWKDD, but do NOT extract the .tar file
i saw my setting-about phone-kernel version 2.6.35.7-i9100dxkg3-cl375463rootdell147#2 ---->so i download KG3--->
CF-Root-SGS2_XX_OXA_KG3-v4.1-CWM4
- Download and extract SuperOneClick (Some say you should not be using the very latest version 1.9, but 1.5 or so) i think i'm not use it, so i not download it
- If you do not have Samsung's KIES 2.0 installed, download and install it. You need it to install the correct USB drivers, so the programs can communicate with the device. Reboot your computer after installation of KIES. done
- Make sure your device is in USB debugging mode: Settings -> Applications -> Development -> USB debugging done
- Reboot your device into download mode: Turn the device off, then power it on again by pressing and holding VolumeDown + Home + Power simultaneously. You will know when you are in download mode, it is really obvious done
- Start ODIN done
- Connect the device to your computer using USB done
- Wait a few seconds, the ODIN screen should show you that a device is now connected id:com--> 0:[com11]
- Make sure that in ODIN NOTHING is checked, except the "Auto reboot" and "F. Reset Time" checkboxes. Press the "PDA" button, and select the "XWKDD_insecure.tar" file. done
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot. device not reboot
- Wait until the device is rebooted, and while still being connected over USB, start SuperOneClick, and press ROOT.
- Reboot the device
- Done ! in odin, box in the top id:com-->FAIL(red colour)
are guys can help my problem? where is my fault?
budi5555 said:
i following this step...
Long guide (for beginners)
- Download the attached ODIN file and extract the .zip file done with odin 1.85
- Download the attached XWKDD, but do NOT extract the .tar file
i saw my setting-about phone-kernel version 2.6.35.7-i9100dxkg3-cl375463rootdell147#2 ---->so i download KG3--->
CF-Root-SGS2_XX_OXA_KG3-v4.1-CWM4
- Download and extract SuperOneClick (Some say you should not be using the very latest version 1.9, but 1.5 or so) done
- If you do not have Samsung's KIES 2.0 installed, download and install it. You need it to install the correct USB drivers, so the programs can communicate with the device. Reboot your computer after installation of KIES. done
- Make sure your device is in USB debugging mode: Settings -> Applications -> Development -> USB debugging done
- Reboot your device into download mode: Turn the device off, then power it on again by pressing and holding VolumeDown + Home + Power simultaneously. You will know when you are in download mode, it is really obvious done
- Start ODIN done
- Connect the device to your computer using USB done
- Wait a few seconds, the ODIN screen should show you that a device is now connected id:com--> 0:[com11]
- Make sure that in ODIN NOTHING is checked, except the "Auto reboot" and "F. Reset Time" checkboxes. Press the "PDA" button, and select the "XWKDD_insecure.tar" file. done
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot. device not reboot
- Wait until the device is rebooted, and while still being connected over USB, start SuperOneClick, and press ROOT.
- Reboot the device
- Done ! in odin, box in the top id:com-->FAIL(red colour)
are guys can help my problem? where is my fault?
Click to expand...
Click to collapse
Sorry you are to nOob to answer.
Google it or look hard
CF root auto roots, no need for 1 click as well, work it out from there.
are guys can help my problem? where is my fault?[/QUOTE]
Guess its your reading skills but as you dont say what method you used it is no more than a guess .
My guess is that on the first page it says this method is now obsolete and points you to this page .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
veyka said:
CF root auto roots, no need for 1 click as well, work it out from there.
Click to expand...
Click to collapse
sorry i don't use superoneclick... my mistake... i edit my post..
JJEgan said:
are guys can help my problem? where is my fault?
Guess its your reading skills but as you dont say what method you used it is no more than a guess .
My guess is that on the first page it says this method is now obsolete and points you to this page .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
i use http://forum.xda-developers.com/showthread.php?t=1056334
yesterday, i saw http://forum.xda-developers.com/showthread.php?t=1103399 too... but i think it's the same...
budi5555 said:
sorry i don't use superoneclick... my mistake... i edit my post..
i use http://forum.xda-developers.com/showthread.php?t=1056334
yesterday, i saw http://forum.xda-developers.com/showthread.php?t=1103399 too... but i think it's the same...
Click to expand...
Click to collapse
Use the CF root thread not the "And then there was root" thread.
Make sure no Kies proses are running, open task manager and kill them all or odin wont work
veyka said:
Use the CF root thread not the "And then there was root" thread.
Make sure no Kies proses are running, open task manager and kill them all or odin wont work
Click to expand...
Click to collapse
u right sir... my problem in task manager.. kies running on my PC... now, i already finish my root.... give thanks to you...
Related
everything worked great till the part where i go into the superoneclick and press root, and then get this error:
SuperOneClick v1.9.5.0
Checking drivers...
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Getting OS Version...
Pushing psneuter...
error: device not found
FAILED
A try again with debugging mode turned on .
Are you using the extinct CF Root thread ???no longer used ???
http://forum.xda-developers.com/showthread.php?t=1056334&highlight=CF+ROOT
THIS THREAD HAS BEEN SUPERCEDED BY THE CF-ROOT THREAD: http://forum.xda-developers.com/show....php?t=1103399
jje
debugging mode is on.
http://forum.xda-developers.com/show...hlight=CF+ROOT i am using this, it isn't working anymore?
http://forum.xda-developers.com/show....php?t=1103399 this works?
btw ur second link(http://forum.xda-developers.com/show....php?t=1103399) won't work
help please :S
wow really nobody can help me?
amfly said:
wow really nobody can help me?
Click to expand...
Click to collapse
Follow instructions in ChainFire's post to root the SGS2. http://forum.xda-developers.com/showthread.php?t=1103399. I bought my phone last night and rooted it immediately.
ok, i will now try the other guide, but I have one problem:
I have procceeded these stages:
- Download the attached ODIN file and extract the .zip file
- Download the attached XWKDD, but do NOT extract the .tar file
- Download and extract SuperOneClick (Some say you should not be using the very latest version 1.9, but 1.5 or so)
- If you do not have Samsung's KIES 2.0 installed, download and install it. You need it to install the correct USB drivers, so the programs can communicate with the device. Reboot your computer after installation of KIES.
- Make sure your device is in USB debugging mode: Settings -> Applications -> Development -> USB debugging
- Reboot your device into download mode: Turn the device off, then power it on again by pressing and holding VolumeDown + Home + Power simultaneously. You will know when you are in download mode, it is really obvious
- Start ODIN
- Connect the device to your computer using USB
- Wait a few seconds, the ODIN screen should show you that a device is now connected
- Make sure that in ODIN NOTHING is checked, except the "Auto reboot" and "F. Reset Time" checkboxes. Press the "PDA" button, and select the "XWKDD_insecure.tar" file.
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot.
how can i reset them?
how can i reset them?
Guessing at what them are reboot your computer and phone .
jje
This is the easiest way to root the device?
Endoran said:
This is the easiest way to root the device?
Click to expand...
Click to collapse
Bump. I'd really like to root without having to install a new kernel...is this possible? Thanks!
1
JJEgan said:
how can i reset them?
Guessing at what them are reboot your computer and phone .
jje
Click to expand...
Click to collapse
no, rebooting the decide won't reset all those steps... i think...
any other suggestions?
help please
Cmon someone
amfly said:
everything worked great till the part where i go into the superoneclick and press root, and then get this error:
SuperOneClick v1.9.5.0
Checking drivers...
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Getting OS Version...
Pushing psneuter...
error: device not found
FAILED
Click to expand...
Click to collapse
Not sure if this helps... But Ive got very same log from Superoneclick after flashing CF root XWKF3 over XWKDD_insecure kernel. I already had root in KDD, maybe thats why.
Sent from my GT-I9100 using Tapatalk
u haven't what i recently asked. anyone else? please?
Once more then .
Flash stock firmware via Odin i suggest KF2 .
Once phone has booted up follow instructions as posted Chainfires CWM and root .
http://forum.xda-developers.com/showthread.php?t=1103399
Suggest KF2 root via Odin method works out of the box for millions .
jje
Well i ma new on this and dont know what to do. I have updated my cellphone to the newest oficial from samsung mobile but i want to root it now but cant find the nesesary files to do it there is a image of the android information any help is welcome
hebyo1990 said:
Well i ma new on this and dont know what to do. I have updated my cellphone to the newest oficial from samsung mobile but i want to root it now but cant find the nesesary files to do it there is a image of the android information any help is welcome
Click to expand...
Click to collapse
Flash Siyah kernel from www.gokhanmoral.com.. the latest version is 3.5.2...... download the tar file on your pc, search for Odin (PC software), and download it.
Make sure your device has USB debugging enabled.
Reboot into download mode. To do it, turn off your phone, then hold power button + home button + volume down simultaneously. Connect your phone to your PC via cable.
On your PC, make sure kies isn't running (check from task manager and kill all services related to it), open Odin, there should be a yellow highlight which will indicate your phone has been detected. Only f.reset and auto reboot should be ticked, NOTHING ELSE. Click the PDA button and navigate to your siyah kernel .tar file.
Flash and have fun
Edit: you can find Odin attached at the end of the first post of this thread: http://forum.xda-developers.com/showthread.php?p=14283342
Just download it on your PC. No need to read that thread.
Hope all goes well.
Sent from my GT-I9100 using xda app-developers app
hebyo1990 said:
Well i ma new on this and dont know what to do. I have updated my cellphone to the newest oficial from samsung mobile but i want to root it now but cant find the nesesary files to do it there is a image of the android information any help is welcome
Click to expand...
Click to collapse
rooting guide
http://forum.xda-developers.com/showthread.php?t=1501719
Spiralzz said:
Flash Siyah kernel from www.gokhanmoral.com.. the latest version is 3.5.2...... download the tar file on your pc, search for Odin (PC software), and download it.
Make sure your device has USB debugging enabled.
Reboot into download mode. To do it, turn off your phone, then hold power button + home button + volume down simultaneously. Connect your phone to your PC via cable.
On your PC, make sure kies isn't running (check from task manager and kill all services related to it), open Odin, there should be a yellow highlight which will indicate your phone has been detected. Only f.reset and auto reboot should be ticked, NOTHING ELSE. Click the PDA button and navigate to your siyah kernel .tar file.
Flash and have fun
Edit: you can find Odin attached at the end of the first post of this thread: http://forum.xda-developers.com/showthread.php?p=14283342
Just download it on your PC. No need to read that thread.
Hope all goes well.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
neerajganga said:
rooting guide
http://forum.xda-developers.com/showthread.php?t=1501719
Click to expand...
Click to collapse
thanks both of you at final i think will instal a new rom even with the guide u gave cant install the program thanks anyway
need help to unrrot and install original software to my galaxy pocket s5300
i dont have backup to my original software
can any one help me ?
any help plzzzzzz
TRY USING ODIN AND FLASH ORIGINAL ROM
I had face with bootloop and i used ODIN to flash original rom and i needed to root again
I'm not sure about this ,so you pls ask more information with senior members
plz reply
thanks
Same issue.!
70usmus said:
need help to unrrot and install original software to my galaxy pocket s5300
i dont have backup to my original software
can any one help me ?
Click to expand...
Click to collapse
PLS ANYONE HELP i cant even use ODIN because my USB driver is not working even i download any software's for the drivers.
boohyucks said:
PLS ANYONE HELP i cant even use ODIN because my USB driver is not working even i download any software's for the drivers.
Click to expand...
Click to collapse
Drivers: Samsung Drivers
Download firmware: tsar3000 or Samsung
Download Odin: 4shared
Preparation:
Download all the above mentioned tools then extract and install USB drivers and reboot your PC, After that extract Odin and Firmware package to known place on your PC to use it in the following steps.
How to flash:
- Run Odin Flasher and check only these options: Re.Partition, Auto Reboot, F.Reset Time.
- Click PDA button and select PDA_S5300xxxxx_REV04.tar.md5
- Click PHONE button and select MODEM_S5300xxxxx_REV04.tar.md5
- Click CSC button and select GT-S5300-MULTI-CSC-Oxxxxx.tar.md5
- Put the phone into Download Mode: Volume Down + Home + Power.
- Connect the phone to your PC using the Original USB cable.
- Check that Odin flasher detects your phone's Com port number then continue to next step.
- Click Start button and watch Odin program during the update process, But do not interrupt it.
- The phone will be rebooted by Odin after all is done, Now you can disconnect it from PC.
- After your phone is fully on it is better to do Full reset by this code: *2767*3855#.
- Wait the phone to restart and then you can set it up the way you like.
Hello,
I have this device Samsung Galaxy S GT-I9000 & I would like to root it. I´ve searched through the web and also through the youtube videos of xda but didnt find any help or helpful information to it! I want to root it, please anyone who is able to help me? Please direct me to a link or to some such place I can have easy and step by step tutorial! I would like to know the advantages and disadvantages.
I want to root my device and install cyangen mode 101, the latest available anyone please help! It would be a great pleasure!
Thanks!!!!
[A] Root Galaxy S GT-i9000 (2.3.4)
nabzZz said:
Hello,
I have this device Samsung Galaxy S GT-I9000 & I would like to root it. I´ve searched through the web and also through the youtube videos of xda but didnt find any help or helpful information to it! I want to root it, please anyone who is able to help me? Please direct me to a link or to some such place I can have easy and step by step tutorial! I would like to know the advantages and disadvantages.
I want to root my device and install cyangen mode 101, the latest available anyone please help! It would be a great pleasure!
Thanks!!!!
Click to expand...
Click to collapse
Prerequisite
Make sure your mobile should possess 70 to 80% battery.
Enable USB debugging mode (Menu (app drawer) > Settings > Manage Applications > Development > USB Debugging – Check box)
Ensure that you have backed up your all important data.
Install Root Samsung Galaxy S GT-I9000 USB drivers. (Download USB Drivers or download Samsung Kies - Drivers Included)
Guide
To root Samsung Galaxy S GT-I9000, first you have to download “CF-Root“, as per your Android 2.3.4 Gingerbread Firmware Baseband Version from Below: (To check baseband version: Go to Settings > About > Baseband Version)
CF-Root - XXJVR
CF-Root - XXJVS
CF-Root - XXJVT
CF-Root - XXJVZ
CF-Root - XXJVU
CF-Root - XXJW4
After downloading CF-Root File, extract it on desktop.
Download Odin extract it on the desktop.
Switch Off your phone, take out the battery and insert it back. Now boot your phone into Download Mode by pressing and holding the Volume Down + Home button together, and then press the Power button till you see the Android Construction logo. Once again press Power/Volume Up button to confirm.
Open 'Odin.exe' and connect your phone via USB cable with your computer in download mode. If your phone is connected successfully the one of the ID:COM boxes will turn yellow.
Click on PDA button and select file “cf-root-xx_oxa_xxx-xx.x-cwm3rfs.tar”.
Please make sure that only F. Reset Time and Auto Reboot options are checked on Odin.
Now, click on the Start button on Odin to start the installation process. Installation will take a few minutes to complete so please wait for the complete process.
Finally, when the installation process is completed successfully you will see the PASS message on Odin and then your device will reboot automatically.
That’s it! You have successfully rooted and installed ClockworkMod Recovery on your device.
Happy Rooting!
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
yes!!! you can UNBrick it!!!
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
unbrick Samsung galaxy s3 mini
omkarfrozen said:
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
Click to expand...
Click to collapse
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Leon bernard said:
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Click to expand...
Click to collapse
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
will try it
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
how to access scatter loading file
Leon bernard said:
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Leon bernard said:
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Click to expand...
Click to collapse
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Leon bernard said:
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Click to expand...
Click to collapse
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
omkarfrozen said:
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
Click to expand...
Click to collapse
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Leon bernard said:
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Click to expand...
Click to collapse
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
omkarfrozen said:
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
Click to expand...
Click to collapse
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Leon bernard said:
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
Click to expand...
Click to collapse
follow this brick
Help me too
Leon bernard said:
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Click to expand...
Click to collapse
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
tebegaya said:
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
Click to expand...
Click to collapse
Hey guys am using samsung s3 mini GT I8190, i recently flashed cyanogenmode 5.1.1 on my device, it was working fine but i decided to do a nandroid back up and in the process my phone died. it cannot power on or go to downloading mode. When i connect to my laptop there is a sound that its connected but then it disconnects help please..
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Hello, i need some help. I have tried all but always shows faild...i even use a recovery.tar and the bar goes all the way to the end but when the procces its almost finish it shows FAIL.
What can i do?
I do have the firmwarew file and it does not work, thx