[DEV] S8530 open - Android Development on Bada

QBA GSM.GPRS.EDGE :"RFMD" RF3225 -1103 - F14BMTB
http://www.rfmd.com/CS/Documents/RF3225DS.pdf
Memory : "Sandisk" SDIN5D2-2G http://omapworld.com/iNAND_e_MMC_4_41_IF_data_sheet_v1_0[1].pdf
PMIC : "MAXIM" MAX8987 EWQ 1041
Update in second...
I hope now Android well porting to easly on Wave II

Atmel chipset under LCD is touch panel controller, I think it's the same as in S8500.
LCD is usually Hydis, some codename: nt35510 (dunno if its Hydis or Samsung marking)
WM8994 is the same thing as in S8500, I9000 and many more.
MAX8997 is also the same as above.
Camera CPU MC-10170 too.
Broadcomm wifi chipset also.
MoviNAND flash is different, but works exactly the same way.
Aint sure about Wifi/BT broadcomm chipset, but on my S8530 I haven't seen any driver errors and it seems to be the same as in S8500 also.
The only thing on our way to port it succesfully was lack of LCD drivers (only guessed display, now I'm sure about it), lack of skills to port these drivers. Now the barrier is that I have no development device. If anyone can find and donate/sell cheap S8530 mainboard to me, would be nice.

PMIC different
Broadcomm too
Im sure ist verry different pcb in Broadcomm
Quad Band Amplifier Triquint on S8500 and RFMD on S8530
http://www.rfmd.com/default.aspx
Understood ist maybe another entreprise but pcb circuit its same

Tigrouzen said:
PMIC different
Broadcomm too
Im sure ist verry different pcb in Broadcomm
Quad Band Amplifier Triquint on S8500 and RFMD on S8530
http://www.rfmd.com/default.aspx
Click to expand...
Click to collapse
PMIC is the same.
As I said I'm not sure about the 2 you posted.
anyway chipsets from GSM/UMTS RF block aren't important for porting, these are handled by Modem AMSS.
One of my S8530 macro photos:
http://tinypic.com/r/v6t9xy/7
//edit:
Or, maybe PMIC really differs, it's 8987 on my picture, or Im wrong...?

Rebellos said:
PMIC is the same.
As I said I'm not sure about the 2 you posted.
anyway chipsets from GSM/UMTS RF block aren't important for porting, these are handled by Modem AMSS.
One of my S8530 macro photos:
http://tinypic.com/r/v6t9xy/7
//edit:
Or, maybe PMIC really differs, it's 8987 on my picture, or Im wrong...?
Click to expand...
Click to collapse
You right its 8987 but S8500 its 8998 or its same just number differ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You're smoker

Any progress?

Gothic253 said:
Any progress?
Click to expand...
Click to collapse
We find LCD DATASHEET, now need developper make driver for.

I hope you can do it. Good luck

dev s8530 open
Hello.
I have Festival installed, but if I try to get it to say anything, I get the following error.
FreeBSD: cant open /dev/dsp
Ive searched this, and have found that some process is probably hogging the device. So, run fstat grep dsp, but nothing shows.
Any clue as to what I can do here?

BiapLorScarp said:
Hello.
I have Festival installed, but if I try to get it to say anything, I get the following error.
FreeBSD: cant open /dev/dsp
Ive searched this, and have found that some process is probably hogging the device. So, run fstat grep dsp, but nothing shows.
Any clue as to what I can do here?
Click to expand...
Click to collapse
Think you litle mistake something !!!
Stop Beer !! lol

hey dudes you are just doing an awesome work! But (just wonder) any progress with porting android on s8500? There has been a progress made (at least display is working ). So how about that? Can you find the modem drivers? Or sensors?

Related

Can the Tytn II drivers be ported onto the Niki?

Hey, I was wondering if the Tytn II drivers, which will be released in a few days, can be ported to our Nikis?
Also HTCClassAction (in http://www.htcclassaction.org/#update_20080509_1) states that the drivers will be released in a completely new wm6.1 (official) package.
If the drivers of other devices with the msm7*00 chip will be released is uncertain.
Driver Porting ... it possible! I its released, some rom cooker will very fast released a working version!
Yes, I'm very positive it can be done.
The only thing I'm worried about if the TyTN II "drivers" will indeed be drivers.. or IF it will really be provided.
this is sounding quite exciting. i wish that i had the knowledge and the brain to be able to help out with the driver porting. were there actually updated drivers released with the kasier rom or was it just tweaks to the software?
The drivers are "expected" to arrive in the following weeks. The "drivers" does not exist yet.
Keeping my fingers crossed. Love you guys
not only driver from kaiser.From other device possible for port also
Now I don't know much about this. But doesn't the Tytn II have the Qualcomm7200 400mhz processor too? Surely you can port it if the processors are the same? Please say yes?
xangma said:
Now I don't know much about this. But doesn't the Tytn II have the Qualcomm7200 400mhz processor too? Surely you can port it if the processors are the same? Please say yes?
Click to expand...
Click to collapse
We actually have the MSM7200B chipset but its not really known what the differences (if any) are between the two!
mccannmarc said:
We actually have the MSM7200B chipset but its not really known what the differences (if any) are between the two!
Click to expand...
Click to collapse
Bad news already =( Keep us updated.
Well here's the good news.
And the leaked new TyTN II ROM.
And here a link to the thread with the Dutch Rom they are talking about which seems to have some sort of hardware acceleration:
http://forum.xda-developers.com/showthread.php?t=393716&highlight=HTC_NLD_3.29.404.
New touch.dll fixing touchscreen problem...
New Kaiser ROM with improved (but not yet perfect if I've well understood htcclassaction...) graphic drivers...
The Niki is becoming a really interesting device... Just waiting for good hackers to port the drivers on it (I'm not good enough to do it myself ).
Is there anythere a list of the files that need to be ported to replace old drivers ?
In fact if we only need to replaces files and registry values, then G'reloc them I may try... (I don't think my Niki would be bricked since drivers are only part of the OS, and I might be able to reflash it entering the bootloader...)
AH MAN This is what we were waiting for! *Building party*
Antubis said:
Is there anythere a list of the files that need to be ported to replace old drivers ?
In fact if we only need to replaces files and registry values, then G'reloc them I may try... (I don't think my Niki would be bricked since drivers are only part of the OS, and I might be able to reflash it entering the bootloader...)
Click to expand...
Click to collapse
That's exactly what I was going to do. I'll take a look.
Driver of kaiser 19212 can't port for niki.I tried 2 week ago.Not luck.
ddi.dll kaiser not working in niki.It get Stuck device of Bootloader.
Other driver, can port but working bad.
We still need wait htc support niki device.Sorry for bad news for all
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So we'll keep on trying...
tom_codon said:
Driver of kaiser 19212 can't port for niki.I tried 2 week ago.Not luck.
ddi.dll kaiser not working in niki.It get Stuck device of Bootloader.
Other driver, can port but working bad.
We still need wait htc support niki device.Sorry for bad news for all
Click to expand...
Click to collapse
Yeah I just tried the ddi.dll with disptools.dll too. Didn't boot. So, we have to wait for HTC to never release their driver for us?
That is probably the saddest most dreadful news I've heard this week.
So how about the Diamond's on this ROM?
And to be specific, the holy grail (?!) of our hopes, THIS one.

[Q] Does anybody know the original name of this android tablet ?

Hy everybody,
Does anybody recognize a F20 cpu based model for this cheap tablet ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance
Rom1nux
Here is the box
Thanks a lot in advance for your help
Rom1nux
if my eyes do not deceive me, the name is on the box,
and google search seems to return exactly the same device
Hello p107r0,
I can found few commercial link about it, other link on french page is writed by me, and "official seem" supplier "MMS support" got nothing on the website (only spec)
This tablet is a "commercial announcement support" offert to client or employed...The polaroid reference MIDCF43 is a "local" reference and i think this tab is derived from a well know tablet.
If you know something about this...let me know ?
If you know what is the "sun3i" exactly is, i want to know ?
The more near i found is name "bmorn v7pro" but i cannot post link here...
I want to be sure before doing something wrong
Thanks in advance
Rom1nux
sorry, not much help from me, unable to find anything more, strangely enough most pages is in french, there's an enquiry form on on of the pages: here, if all else fails, maybe try asking there?
Thanks p107r0 for your try
If anybodyelse got information about this device, please, let me known
Rom1nux
I've seen this tablet on e-bay, size is appealing but there are definite downsides to it, it is 480x272 pixels, has wifi b/g, I believe a resistive screen, 1000 mAh battery which does not sound so hot, Android 2.3 (and that's probably the end of it), 2gb interanl, probably 256mb etc. Just found out that "reported" battery life is 160 minutes, not good as usually real life results are less. This is another example of branding cheap electronics with a recognized name, a horrible process designed to lure the buyer into a false sense of security. I'd steer clear, if you want a 4.3" device, go get an Archos (and I really would not recommend that either)
Hello zharkov,
In my country this product is giving everywhere to customer or employed, like a pen or usb key with the trade mark on it....so thanks for your opinion, but i only want to know the base code name of this device.
For information
sun3i are F20 based
sun4i are A10 based
If someone else got information about the name of this tab, let me know
Thanks in advance
Hello,
If you want some interesting information about this device :
http://forum.frandroid.com/topic/102352-polaroid-43-pc-tablet-midcf43-low-cost/
For information, the serial port seem to be is expoded...
Rom1nux
Hello All,
Big thanks to matzpx8709, tell me the existance of PMT43 device known as TOUCHLET 4.3 too.
Thanks to all other help me
Rom1nux
Hello Everybody,
You can find interesting information about this device and more generally for the allwinner F20 here : http://www.sysfwlab.com
I try to port uboot for sun3i (actually work only on sun4i(A10) or sun5i)
Please let me known if you know other clone or device where F20 is used
Regards
Rom1nux
There is a both french and english topic where two people are working on reverse-engeneering the mechanics of this tablet. They have regrouped some technical information in this thread, in addition to the previous link : http://forum.frandroid.com/topic/102352-polaroid-43-pc-tablet-midcf43-low-cost/
I do hope this will allow to offer a more optimized ROM for this economic device, as the default ROM misses the Google Play and does feel slow and a bit buggy.
Hi, how can i root this device? I tried with many apps, but no success, help me plese. Thank you

[PDF] Qualcomm complet confidentiel and privat QSC62X0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Uploadinghttps://rapidshare.com/files/2905834676/QSC62x0 Ja~.rar
QSC6240/70 complet 335 Pages technical book :
Upload : https://rapidshare.com/files/550238324/QSC6240datasheet.pdf
How did you get this ?
Thanks Tigrouzen , this is the technical document about S8500 modem, this datasheet is necessary to the modem drivers development, Be careful of this, all xda-forum could be affected.
I found this too: http://datasheet.eeworld.com.cn/pdf/182664_QUALCOMM_QSC6270.html
Pay attention to the last page of this datasheet.
Many thanks
Thanks, interesting thing.
loger2 said:
this datasheet is necessary to the modem drivers development,
Click to expand...
Click to collapse
No. It's not.
How about this :http://read.pudn.com/downloads161/sourcecode/windows/system/730186/QSC6240%20datasheet.pdf
Rebellos said:
Thanks, interesting thing.
No. It's not.
Click to expand...
Click to collapse
What kind of document could be useful BREW MP codding ?
Rebellos said:
Thanks, interesting thing.
No. It's not.
Click to expand...
Click to collapse
So how these documents will help the development?
Knowledge is power.
Devriel said:
So how these documents will help the development?
Click to expand...
Click to collapse
I'm nearly sure that they won't. There are no documents that will help.
I'm nearly sure that they won't. There are no documents that will help.
Click to expand...
Click to collapse
Complete documentations + all Tools + Source Code from Samsung S8500... :angel:
Best Regards
That would help, definietly
We need petition
To turn bada an opensource project?
I will sign it if it will exist..
Maybe think twice... :cyclops:
If Qualcomm is BIG part of S8500... Hard + Software...
How many Open Source Projects you know from Qualcomm...
After you have think again... Qualcomm stuff is in many handsets...
So they can't give you all nmandatory internal confidental stuff...
Otherwise hundrets of handsets with Qualcomm Chipset affected... from MANY manufacturers...
And btw... Qualcomm + AMSS is very very old... long tradition... "minor" changes...
So if you have full description for 1 Qualcomm Chip... you can attack also other Chips with Qualcomm...
So this is BIG BIG BIG impossible dream.
Not expect any gifts from Samsung nor from Qualcomm... :laugh:
Best Regards
+1
There's no chance to opensource the phone part. If you search, you will find that the modem/ril is closed even on the SGS for example...
Only Reverse Engineering... Reverse Engineering again Reverse Engineering... brain... much brain... time, many time, luck... many luck.
If we have no luck... also 2012 NO Modem function...
But this is NO shame. Because this is HARDEST task...
Best Regards
The problem is that on AMSS side there's very big part of code written by Samsung. Qualcomm probably even has no access to it. We have to rebuild the opposite side, working on Bada side. The secret isn't in Qualcomm documents/codes but in Samsung ones.
The secret isn't in Qualcomm documents/codes but in Samsung ones.
Click to expand...
Click to collapse
Anyone work with WinComm + QXDM ? Logging on bada site...
http://forum.xda-developers.com/showpost.php?p=12720116&postcount=5
Maybe OLDER bada Version more output...
For WinComm for sure... older Firmware deliver more infos... less Security...
Maybe XXJB6 most "AMSS output"...
Best Regards
adfree said:
Complete documentations + all Tools + Source Code from Samsung S8500... :angel:
Best Regards
Click to expand...
Click to collapse
Only if with had Wave's source code in the first place, we'd have had a fully working Android port on 2010's Christmas...
i tkink we should try to open i9000 modem files like we did on our bada .so files and the modify those modem files to adapt it for s8500..
just a thought.

[Q][SOLVED] Need Stock Rom for K968/A600 - MTK6572 Chipset

Hi All! I just got a new phone... It's a Chinese phone with no apparent brand.
Unfortunately I tried to root it and while using SP Flash Tool and MK Droid Tools I bricked it , Now i've been trying for days flashing different roms for similar phones in the hopes that one will work. One kinda worked but was the wrong resolution and I couldn't use it... I don't even remember which one it was.
Before doing this I tried to back up my images, but I am an idiot and didn't do it right. I have a scatter file and some other images from my original rom... but nothing beyond the recovery partition. Here's the list of files I have from the original phone:
MT6572_Android_scatter.txt
preloader.bin
MBR
EBR1
uboot.img (renamed to lk.img)
boot.img
factory_NONmodified_recovery.img
nvram.bin
pro_info
protect_f
protect_s
seccfg
I have also attached the scatter file in case anyone finds it useful.
If anyone can help me find the missing files or a different factory image, I'd greatly appreciate it! Below are specific details about the phone... maybe there's one that you guys know about that fits it? Also, if i try a different rom... which parts of my original rom should I still flash in, and which parts of the new rom should I flash?
Thanks alot!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's what I got, including details from the FCC
2ADBRK968 by Shenzhen Kaliho Technology Development Limited for smart mobile phone
Product: smart mobile phone, Marketed as MTK6572 solution 3.5inch cheap 3G android smart phone K968
Trade Name: KALIHO, K-CEL, K-TEN
Model Number:K968
Serial Model:A600
Screen: TFT 3.5" HVGA(480x320) Capacitive touch screen
Operation System: Android 4.4.2
Features: 3G, Bluetooth, Email, WiFi, FM Radio, MP3 Playback, QWERTY Keyboard, Touch Screen, Dual Sim Card, Auto Focus, Built in Flash
Processor: 1.3 GHz Dual-Core Processor
Chipset: MTK6572
RAM: 256MB
ROM: 2GB
Cameras: 0.3MP+0.3MP Front/Back Cameras (I actually think the back one is 2MP)
Frequencies: WCDMA 2100/850MHz (1900 Optional) and GSM 850/900/1800/1900MHz
Dual-Sim card slot
External Memory: MicroSD up to 32GB
Click to expand...
Click to collapse
FCC Page: http://fccid.net/number.php?fcc=2ADBRK968&id=477292#axzz3RxdczcMd
Product Info/sale: http://oemfone.en.alibaba.com/produ..._5inch_cheap_3G_android_smart_phone_K968.html
I think it might take a while till i get any response, so still trying myself.... I'm looking around to see if anyone has a working phone that is like mine, but until then I'll still try roms for devices similar to mine, but i have a question, maybe I should post it on a new thread?
How do i find out what's going on whie the device is booting? it gets to the splash screen, i can get to recovery as well, but I want to know what's going on during the boot process... adb logcat does nothing but say -waiting for device-
Is there another way?
Thanks again!
I wasn't sure wether I should create a new post or just reply here, so i just went with reply
After looking I was finally able to get a dump of the stock rom from someone with an identical phone, and in the spirit of openness, I'd like to share it with you guys if anyone ever needs it.
Link: http://www.mediafire.com/download/9zkfz9n7hyiy8k6/A600_MT6572_ForFlashtoolFromReadBack.zip
You can flash this rom using SP Tools. Also, the phone will not boot immediately after flashing this rom... first you need to start the phone in (bootloader?) mode by holding the vol. Down and power. Once you're there do a factory wipe... technically this should be done in recovery mode, but idk how to do it with this rom because there's no "Yes" option when recovery asks you if you're sure about a factory wipe. Maybe it's hidden with some sort of key combo? idk, do it how you prefer.
Well, thanks, if you have questions let me know

Question about MT6582 (N9006) and internal storage

Hello,
First of all i hope I'm in the right category, sorry If I'm wrong.
So, i have a question about this tablet. It has a really low internal storage that it uses (2GB) and on the other hand it has phone storage total space of (29.68GB). It's a MTK6582 from AliExpress (China) and the MTK Droid Tools says that: "MT6572 (MT6582 is Fake!)". So my question is can any partitioning be done to improve the size of internal memory or it's just simply fake? I'll attach some screenshots with this tablets information.
Thank you for reading and i hope you can help me out.
Thanks!
https://ibb.co/qJH9qCS
https://ibb.co/xq0JwD6
https://ibb.co/fYrDQdT
https://ibb.co/LrZMZs0
https://ibb.co/gVKwcPH
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone?
I tried to at least return the tablet to factory settings to speed it up a bit, then i did a wipe of EMMC and after emmc wipe the tablet boots to chinese language and a message that com.android.settings has stopped working, it's constant and i cannot do anything else... What happened to it?
Milos00 said:
I tried to at least return the tablet to factory settings to speed it up a bit, then i did a wipe of EMMC and after emmc wipe the tablet boots to chinese language and a message that com.android.settings has stopped working, it's constant and i cannot do anything else... What happened to it?
Click to expand...
Click to collapse
Try to flash original firmware again
amirizad_7436 said:
Try to flash original firmware again
Click to expand...
Click to collapse
I did backup everything with MTK Droid Tools before i thought about doing anything... Are all the files that i need in that backup? Can you direct me to a guide on how to do that, because MTK says "MT6572 (MT6582 is Fake!)- ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone! " which confuses me.
Milos00 said:
I did backup everything with MTK Droid Tools before i thought about doing anything... Are all the files that i need in that backup? Can you direct me to a guide on how to do that, because MTK says "MT6572 (MT6582 is Fake!)- ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone! " which confuses me.
Click to expand...
Click to collapse
No I don't mean backup
Download orginal firmware and flash it
I'm a bit of a newbie when it comes to these things, can you help me choose a firmware based on those pictures?
Edit: Found this, is this good? https://firmwarefile.com/samsung-galaxy-tab-n9106-clone
Mine is D101_MB_V4.0 2014-09-26 and this one is D101_MB_V3.0 2014-09-30, does the difference in version matter? Cannot seem to find the correct one.
Milos00 said:
I'm a bit of a newbie when it comes to these things, can you help me choose a firmware based on those pictures?
Edit: Found this, is this good? https://firmwarefile.com/samsung-galaxy-tab-n9106-clone
Mine is D101_MB_V4.0 2014-09-26 and this one is D101_MB_V3.0 2014-09-30, does the difference in version matter? Cannot seem to find the correct one.
Click to expand...
Click to collapse
I really don't understand sorry
But you should use the latest one
amirizad_7436 said:
I really don't understand sorry
But you should use the latest one
Click to expand...
Click to collapse
On the motherboard of the tablet that i have it says: D101_MB_V4.0 2014-09-26 but the one that i linked is for the version 3.0, should i try to do it or maybe use something else like this https://www.needrom.com/download/n9106d101-mtk6572-10-inch/ ?
I'm looking for help finding the link for D101_MB_V4.0 2014-09-26 or confirmation if the one of those two that i linked would work?
This one says in description it can be used for both D101 V2.0 & V4.0 but I'm not sure. https://www.needrom.com/download/n9106d101-mtk6572-10-inch/

Categories

Resources