Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Movisman said:
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Click to expand...
Click to collapse
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
0semaj0 said:
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
Click to expand...
Click to collapse
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Movisman said:
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Click to expand...
Click to collapse
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
0semaj0 said:
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
Click to expand...
Click to collapse
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Movisman said:
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Click to expand...
Click to collapse
Hey Movis,
What did you end up doing for your dropped phone?
I too have dropped my phone on its corner and the chrome along with the plastic is now dented.
Another one with the same problem here. I managed to create a bump on the chrome bezel.
Can I bump this post as I've also just noticed a ding in the corner of the chrome bezel was wondering if anyone had found a solution to this yet.? short of replacing the LCD/digitiser which like OPs phone are working fine. It's just cosmetic damage.
I once was in a bad mood and snapped a screen and backing/housing in half.I can't remember exactly,but I'm thinking the chrome bit may be part of the thin metal casing/housing that is glue taped onto the screen.
You separate the screen from the housing by using a hot air gun sparingly.
If you look back at a motherboard thread I was involved in,a person on here called Roger put up a great video tutorial link that may answer all your questions...
Sent from my GT-I9100
Ah cheers for the reply. Had a look at the mobo post you were involved in followed it to the link and coincidentally that's the exact video I watched last night. Very good video good detail and instructions. But its the black one he is stripping down so he makes no reference to the bezel which afaik is only used on the white ones.
Sent from my GT-I9100 using xda premium
I've not seen the chrome bit listed separately,so I guess its part of the metal top housing that the LCD is glued to.I've got a white one and its got a ding on it too.
You could email Samsung to see if you can get the part,but I think its not worth risking cracking the screen and you probably couldn't resuse / would get that stupid gluey tape stuff.
Sent from my GT-I9100
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
vyks10 said:
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
Click to expand...
Click to collapse
Hi, will the heat actually damage the screen? I saw some posts mentioning about putting it into the oven and such. It sounded very intense but if it works without damaging the screen, i might give it a try. Facing the same situation as yours. Scratches and dents all over my front chrome bezel.
Related
today my at&t tilt2 accidently fell from my hands and got heavily scratched on the chrome shell (bezel) the bezel even got few small dents & & the chrome colour came out
so i wanted to ask how can i remove this bezel,as i thought to remove it sand it & then paint it chrome again
& also suggest me is my idea good or not
no rplys? atleast tell me hw can i remove those scratches & dents
i wanna know this too since i just dropped mine today and its a fairly small chip but i still get a little crazy over it
please help us out
Sorry for bad news but to remove the bezel you'll need to fully dissassemble your TP2. You'll have to dismantle the main housing to unscrew hinges. Once you separate the upper part with LCD you'll be able to open it, and then separate the bezel from LCD and digitizer. I've done it myself couple of times but be aware that is not a 5 minute job (especially if you're new to this). You'll need tools - small philips screwdriver, small star screwdriver an special plastic prying tool (couple of them, they get broken easily, you don't have to use them but you'll most likely scratch the phone). You can get tool sets on ebay. Word of advice - if only possible try not to separate LCD and digitizer. Once you get dust and/or fingerprints between them it's a HELL of a job to get rid of them.
Check out mike channon's site for dissassembly guide.
Good luck guys!
EDIT: Personally, I would rather try to do some touch-up repairs without opening the phone if possible.
touch up repairs like what? suggest me something specific
I want to replace my screen and bezel but don't mind stripping the whole phone down if thats what is needed.
Try this link http://translate.google.co.uk/translate?u=http%3A%2F%2Fwww.pdacenter.ru%2Frazborka%2Fhtc_touch_pro2%2F&sl=ru&tl=en&hl=en&ie=UTF-8
As mentioned by pjm77 this does not look easy, and chances are if your not very careful you could mess up your phone.
By touch up I mean trying to paint the damage to make it less visible. Can't really say if that's possible in your case - judge for yourself. Dissassembling the whole phone is by all means possible, I was able to do it several times and I'm just an enthusiast. Just bear in mind that unless you're really skillfull and experienced you end up with a little damage here and there (clips broken, scratches etc.), it's time consuming and there is a risk of serious damage. In the end you may just put a lot of effort into it and be a little disappointed with the final result. But maybe not, it's up to you. Whatever your decision is - good luck!
EDIT: To be more specific I'll give you the real life example of touch-up. I had an awful, long and deep scratch on the back of my LCD (you can see that black, metal part when you slide out the keyboard). I took the masking tape and precisely shaped it in a way that only the scratch was visible (I'd say less than 0,5 of mm wide). Then I took a black paint (originally for my mother's renault) and painted the scratch. Aftrer half an hour I removed the masking tape. The repair is not perfect in any way, the scratch is still there if you know where to look. But I just never noticed it again and simply forgot about it until today.
I used a touch up pen from Staples that has metallic ink. It was a Silver Pilot Pen with Fine Point tip. Like pjm said, touch up paint isn't going to make it look perfect, but the scuffs on the chrome bezel are less noticeable. The ink is a little lighter than the chrome but makes the black cuffs disappear and is nice because you can get small marks with the fine point. I think it was $2.99.
Do anyone has video or pdf or wtever guide to give the instruction how to disassemble the flyer?(i am thinking to repair the flyer myself) Thank you
Here you go:
www.techrepublic.com/photos/crackin...3?seq=2&tag=content;siu-container#photo-frame
thx, but i have 1 more question, do u know how to remove the digitizer? is it the same way as other smartphone?(use hot gun and remove the digitizer?)
athris said:
thx, but i have 1 more question, do u know how to remove the digitizer? is it the same way as other smartphone?(use hot gun and remove the digitizer?)
Click to expand...
Click to collapse
Yes, there is a note in the techrepublic teardown about it being bonded like a smartphone. You should however be vary careful given the size of the screen more heat (not temperature) is required, and the risk of thermally cracking the underlying LCD panel is correspondingly higher.
Beware! Learn from my adventures.
So, I took apart my wife's HTC Flyer this past week to replace the screen. While the Techrepublic teardown shots are helpful, it's missing about ten steps at the end that involve actually removing the screen. I've messed around with tabletpc's and laptops before but not cell phones so wasn't really prepared for the fact that you have to pretty much take the whole Flyer apart in order to be able to get the screen off. As far as I can tell, no one else has documented taking one of these apart to replace the screen. I will write up something more involved when I get a chance but here's a couple things that I found out about the screen.
1. The part of the screen that you touch with your finger and stylus is not glass! It is a heavy plastic layer that is adhered to the glass digitizer. It is clear with the black around the edge and cutout for the HTC logo. This was the part of my screen that had chips in it. I tried to use a screen repair kit to repair the chips (which I did) but it took off the outer, darker finish in the process. So I moved to the next step, replacing the screen. I didn't know about the outer layer, otherwise that would have been much easier to replace. But, I don't think you can get that part unless you have connections with HTC.
2. The outer layer/digitizer glass comes as one part (along with the n-trig connector). I ordered mine for around $50 on ebay.
3. You will need to take the back off and much of the motherboard to be able to disconnect the n-trig connector.
4. Taking the screen off will take heat. I used a hair dryer but more heat could be better although you have to be careful of the lcd underneath. My digitizer broke while removing and ending up putting a small gouge in the lcd. I was able to fix the lcd well enough, just be careful.
5. HTC used a buttload of sticky tape to secure the glass to the lcd and case. My cheap blue pry tool quickly broke so I ended up using a plastic butter knife to separate digitizer from the case. Once off, I used Goo Be Gone to get rid of all the sticky tape from it. I'm ready to put new tape on but I'm not sure exactly what they used. Anyone have any ideas? It's a black, closed cell sticky tape that is really stringy when it comes to taking off. Most of the stuff I see for sale online seems to be really thin stuff. I picked up some Scotch Outdoor Mounting Tape by 3M that looks to be similar that I am going to experiment with. Anyone know for sure what they used?
6. I put the new digitizer on temporarily to check to see if it worked and it did (yay)! But I still need need to cut all of the tape and put it in the right spot. There are also these little plastic tabs that go on the backside of the screen. They are used to refract light from the led's to light up the outside navigation buttons. Be careful not to lose these. I did, and had to make one. We'll see how I did once I get it back together.
7. I found that there's not a lot of parts out there for these things. At least not compared to cell phones. Now that they're being discontinued, I don't know if that is going to help.
Anyway, I took a few pics along the way and will try to write something up when I get more time. I just wanted to give folks a heads-up on the screen and how it's put together. I can't imagine the View's screen is any different. So whatever they're using for the outer layer isn't Gorilla Glass. Or is it?
UPDATE:
Here are the promised photos of this disaster. I'll add the commentary tomorrow (I'm tired).
Two more comments and I can finally upload my photos.
I need to replace my LCD and Glass...anyone know where I can order these parts...I cant find them anywhere.
Hard to find parts for the Flyer/View which could be a problem. Looks like some is selling an LCD, though on eBay.
http://www.ebay.com/itm/PH-LCD-HT-2...360?pt=LH_DefaultDomain_0&hash=item27bf8f0390 from my PG41200 using Tapatalk
I purchased mine here and it works great.
http://www.ebay.com/itm/260906551668?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Much better price. What kind of tape did you use? Also did you have to replace any of the light reflacting plastic tabs that are used to light the buttons around the outside of the digitizer?
Sent from my PG41200 using Tapatalk
Will a replacement screen for the Flyer work well on a View?
I don't see why not. Except for some of the internals, they are pretty much identical hardware wise.
Okay so I am sharing my experience for everyone. I had recently broken my screen, and I needed to replace the screen. I bought a screen digitizer off of eBay, and....Destroyed the phone sub frame. The reason I am posting is because I am warning all of you, you need to buy a full display assembly online. This includes the whole new display( glass and LCD) wires and bits, and a full subframe. Unless you are superior to an Asian 12 year old working in the factory that made your phone (hint hint, wink wink, you're not) than you need to buy a full assembly, or end up like me an destroy your phone.
Sent from my Amazon Kindle Fire HD using Tapatalk HD
+1.
Unfortunately, I saw this post after doing damage to my phone. The plastic housing that the digitizer /lcd sits in is verrrryyy easy to damage around the edges when you try to separate the screen. Heating it with the heat gun to get the separation actually makes it even more fragile and prone to damage. Thankfully I was able to return digitizer/lcd and get full setup from here :
http://www.etradesupply.com/oem-htc-evo-4g-lte-lcd-screen-and-digitizer-assembly-with-front-housing-and-light-guide.html
Hopefully things will go a little better this time.
Wow, that includes the plastic frame? I replaced my screen a couple of weeks ago (glass and LCD), and the edges of the frame did get slightly chewed up. It's not too bad, but I wish I had known abut this item.
On a positive note, I suppose I can get a job in China when the economy completely collapses.
Sent from my Nexus 7 using xda app-developers app
Ya my screen got waterlogged after I got trashed and left it out in the rain. Let everything dry out and thankfully all the boards and connectors work. I ended up going the cheap route and just buying a screen and not the frame. I almost successfully got the thing apart. I do have a small chip in the frame on the left side but my case covers that. I only paid around $50 but I did give myself around $50 in headaches. Definitely spend the extra $50 and just get the whole package.
If you do decide to try and separate the screen from the frame, use a lot of heat. Not necessarily high heat, but for a good duration. Get the adhesive nice and warm. Then pry it loose through one of the holes in the housing/frame (go at it from the back) and slowly work it away from the frame. Once you get it off, heat the adhesive back up and then add some 5 minute quick epoxy to the black adhesive pads in the frame. Then use some clamps and let the epoxy cure. There is a great video I followed below. It took me a while and I will probably ride with this for a minute until it bothers the hell out of me. My gf said she can't even notice.
https://www.youtube.com/watch?v=Ae52Ug8vFwA
case screen cover plastic sheet work?
I'm just wondering how many naked phones get broke compared to well protected?
Gnexd said:
I'm just wondering how many naked phones get broke compared to well protected?
Click to expand...
Click to collapse
I have a Incipio NGP case on mine all the time and I always have a screen protector installed (usually the cheap ones from Amazon). I have never had a problem with the screen until I left my phone out in the rain. The Gorilla Glass II is decently strong but only to a certain extent. I mainly use the screen protector from scratches if I accidentally put it in the same pocket as my keys.
I was afraid of breaking mine one day, fortunately for me my volume button went out first and I have Best Buys insurance and the replace the phone with no deductible.
Seems like screen issues are pretty common on this model. I'm on my 4th Evo now because the screen kept failing on me. Based on what I read it sounds like I'd never want to have to replace this myself.
hi as many note 3 users know, the plastic side frame is easy to get damaged, i have few cracks and one line just under the main power button (not sure just facial or completely crack?)
so, how easy is to change and which one i have to buy ? - im quite noob in hardware sides.
Sure you can buy one on Ebay
I have the same problem, the silver plastic bezel is very fragile.
If you search in Ebay you can found the Bezel and some of them come with tools to turn this in a complete DIY.
Actually i found all the body for this phone in ebay, so you can turn your used and damaged note 3 into a "brand new" one.
Thanks 4 the info. Where did you find it. Could you please share the link?
Thx in advance
hey guys.here is a link for the bezel replacement Bezel On EBAY
i want to tell you that it's not that easy to change it as you need to move the lcd screen from the one bezel to the other one.
there is glue between the lcd and the bezel so you need to warm it and remove it really carefully.i did the process yesterday on my note 3 and it was a pain in the a$$ so i have to tell you to be carefull before any move you re going to do.
Any link for Indian note 3?
Sent from my SM-N900 using XDA Free mobile app
I considered doing this, as I was given a note 3 a while back, but the bezel is beat to hell and the screen had a minor crack. I should've replaced both at the same time, but the small crack turned into a large one and needed immediate attention It's covered by a case now anyway though, so it's not much of an issue anymore.
I dropped mine a while ago and put some pretty nasty scratches on the bezel.
I ended up sanding all the plastic chrome plating off down to the white plastic underneath.
covered the screen with electrical tape and ran a razor round the edge (so I could get to the front part)
It actually looks really good, I prefer it to the chrome.
I got a cheapo battery cover off ebay aswell in orange and it looks real good,
Its a tough job!!!
got my Note 3 as a gift from a friend who cracked it. I replaced the entire Display (along with frame)
and 3 days later I dropped it and got scratches in the frame.
so I decided to buy a frame and fix but its really a tough job.
so I got a bumper for 3$ and job done
I have installed one of those here http://www.ebay.com/itm/Thin-Aluminum-Metal-Bumper-Case-Cover-For-Samsung-Galaxy-Note-3-III-N9000-N9005/151251742076?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D31478%26meid%3D341538ef5e9d4d6da3228a5f902e8cf1%26pid%3D100033%26rk%3D1%26rkt%3D4%26mehot%3Dpp%26sd%3D151251742076
There are some more nicer ones our there, however this does the job well and the build quality is goodd too, my first one at 1,30 USD was not worth anything.
thanks i thought i saw same one for bit less than that, will browse ebay later.
maskerwsk said:
I dropped mine a while ago and put some pretty nasty scratches on the bezel.
I ended up sanding all the plastic chrome plating off down to the white plastic underneath.
covered the screen with electrical tape and ran a razor round the edge (so I could get to the front part)
It actually looks really good, I prefer it to the chrome.
I got a cheapo battery cover off ebay aswell in orange and it looks real good,
Click to expand...
Click to collapse
Photos plz
Up! I'm interested too.
yes i just remember i have some sand paper at home please post photo and detailed instructions... cheers
rockbastard said:
I have installed one of those here http://www.ebay.com/itm/Thin-Alumin...id=100033&rk=1&rkt=4&mehot=pp&sd=151251742076
There are some more nicer ones our there, however this does the job well and the build quality is goodd too, my first one at 1,30 USD was not worth anything.
Click to expand...
Click to collapse
Hows the reception with this frame on it? Bc in the past i bought a cheap one that folds over the original side bezel but reception dropped a lil bit.
triad88 said:
Hows the reception with this frame on it? Bc in the past i bought a cheap one that folds over the original side bezel but reception dropped a lil bit.
Click to expand...
Click to collapse
I haven't noticed any drop in reception at all
rockbastard said:
I haven't noticed any drop in reception at all
Click to expand...
Click to collapse
because you must be either living in the area where your carrier signal is real strong/good, or you dont pay attention to little details, otherwise you're lying
I have tried handful of those and other plastic metalized/mirror painted bumpers and what not and all to one had some impact, especially those which had metalized paint/metal/aluminium back cover.
Simple speed test will tell alot when wearing the cover, or just go and keep an eye on your signal strength meter. It sure as hell affects signal.
mine Note 3 is banged up pretty bad around the bezel but instead I just figured it would be more practical getting some slim neat bumpers and call it a day. not only hiding worn and tired bezel but also protecting the screen and back camera optics to some degree
some of my past purchases that proven to be good investment:
BLACK - http://www.ebay.com/itm/371686423462
BLACK - http://www.ebay.com/itm/331859225625
http://www.ebay.com/itm/271911899853
http://www.ebay.com/itm/391289113353
http://www.ebay.com/itm/151139101488
http://www.ebay.com/itm/181701505005
http://www.ebay.com/itm/182354407036
http://www.ebay.com/itm/311580942819
just thought I will share...
Mr.Ultimate said:
because you must be either living in the area where your carrier signal is real strong/good, or you dont pay attention to little details, otherwise you're lying
I have tried handful of those and other plastic metalized/mirror painted bumpers and what not and all to one had some impact, especially those which had metalized paint/metal/aluminium back cover.
Simple speed test will tell alot when wearing the cover, or just go and keep an eye on your signal strength meter. It sure as hell affects signal.
mine Note 3 is banged up pretty bad around the bezel but instead I just figured it would be more practical getting some slim neat bumpers and call it a day. not only hiding worn and tired bezel but also protecting the screen and back camera optics to some degree
some of my past purchases that proven to be good investment:
BLACK - http://www.ebay.com/itm/371686423462
BLACK - http://www.ebay.com/itm/331859225625
http://www.ebay.com/itm/271911899853
http://www.ebay.com/itm/391289113353
http://www.ebay.com/itm/151139101488
http://www.ebay.com/itm/181701505005
http://www.ebay.com/itm/182354407036
http://www.ebay.com/itm/311580942819
just thought I will share...
Click to expand...
Click to collapse
you have a lot of cases!
erwinsie said:
you have a lot of cases!
Click to expand...
Click to collapse
little too many ... beware that those wooden cases are the coolest thing your phone can get but if you do drop your phone they crack and break apart sometimes... not always though but alot alot sooner than any plastic case would and thats a heartbreaking thing because there not exactly cheap case, but hey - how often does someones phone feels and smells like real fresh quality piece of wood? I like them wooden ones very much even if they crack and put some tax on my pocket at the end of the day its almost like your personal signature of style ... besides, its always warm to touch and zero signal interference
PS: lots more were thrown out many months ago, especially all those metalized ones, no use to me nor could I offer them to anyone I knew who had note 3 due to what they are
When my display was damaged, it got repaired, not only the glass, but the whole display including the bezel, it was 1 piece.. I guess it's very hard to replace only the bezel
I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
GrandMasterPlank said:
I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
Click to expand...
Click to collapse
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
honorable said:
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
Click to expand...
Click to collapse
Thanks dude, much appreciated. I was into it until you started mentioning removing parts by heating them up then thought I'll leave it to the experts. :laugh: Honor UK have quoted me £80 as it's a pretty clean break so I'm going to give them a go and see what they say. If they do the same as they did for you, which they said they wouldn't!, then I'll go with that. Will let you know.
I'm surprised their aren't more threads on hear about replacing screens because this phone does feel fragile despite being reasonably weighty so I'd have thought there'd be loads of cracked screens out there. I dropped my old S5 a couple of times from higher up and the screen survived both times. Am now thinking a tempered glass protector might be in order for the 7 :fingers-crossed:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
honorable said:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
Click to expand...
Click to collapse
After reading reviews of the official Honor repair company, SBE Limited, and how they appear to be happy to scam people I thought I'd have a go myself. So I bought a replacement front glass and thought I'd give it a go.
Dissembling the phone is really easy, once you've got the hang of the clips holding the back on, and taking it all apart was easy. What wasn't so easy (read nigh-on impossible) is separating the front glass from the digitiser. I tried and tried and in the end the touch screen just split into a number of layers so I'll need to order the complete screen assembly. My concern is you mentioned you bought one off ebay and it wasn't as bright as the original. From this I'm guessing it wasn't an original screen? I'd like to get an original if I can. Do you have a link to the one you bought? How long did it take coming from China?
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
boroleigh said:
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
Click to expand...
Click to collapse
Thanks for the nod. Tried it but no joy. For some reason they don't support the Honor 7. Very Huawei tbh, they're left hand doesn't know what the right is doing. A bit all over the place.
honorable said:
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
Click to expand...
Click to collapse
Great stuff, have just ordered the last one they had in stock in they're in France also, so should be quicker than coming from Hong Kong. Funny thing is I hadn't seen their add before, it hadn't come up with my ebay search for 'Honor 7 replacement screen'. Without having the name I'd not have found it and paid more so thanks again! :good:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
Click to expand...
Click to collapse
Great tips, thanks again. I'll be sorting it as soon as it arrives. Will report on how I get on.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.......
Click to expand...
Click to collapse
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
GrandMasterPlank said:
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
Click to expand...
Click to collapse
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
honorable said:
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
Click to expand...
Click to collapse
The screen and housing isn't original Huawei, it's a pattern unit but tbh it looks totally identical in use, no less dim than the original screen. There's also no bleed at all. There weren't any hollows and slots to fill with card under the battery. The only hollow was at the base of the battery as it sat slightly higher up (towards the top of the phone when laid flat) in the casing so I filled that with folded card.
The only slight issue is that the screen shape (rounded corners of the glass) when looking at the phone from the front doesn't fit into the corners of the casing absolutely perfectly. Tbh only a phone nut would notice it, wouldn't be an issue to anyone else.