Hi Guys,
I hope everyone is doing well. I need some help from you guys.
Can all of you please check the ROM you have and verify if the this programming code works? ##AKEY#.
Don't worry, it will not do anything to your phone, just cancel out of it. I need to know which ROMs are supporting this cause I need to enter an A-Key manually. It will just save me the effort of flashing various ROMs to figure out which one has it working. My current ROM SteelROM 2.2, does NOT have this... NOTHING happens when I dial in the code.
Thanks for all your help!
Virus eternity Rom
call me Mr.Chow
thizzlemania91 said:
Virus eternity Rom
call me Mr.Chow
Click to expand...
Click to collapse
Thanks for checking Mr. Chow! Are you saying that menu works on the Virus ROM? Gotta link, Sir? Thanks!
Works on mine as well.
Works on the Chogardjr3D ROM (2.3.4)
Steelrom 2.6 works, you know you can install the epst.apk that works with that dial code seperately.
thizzlemania91 said:
Virus eternity Rom
call me Mr.Chow
Click to expand...
Click to collapse
Thanks very much for your responses guys! On the Virus Enternity, when I enter the MSL/SPC code, I don't actually get a menu to enter the A-Key. Can you guys confirm this behavior?
How about the other ROMs, after the ##AKEY#, and the correct MSL/SPC, does the menu stay up to enter the actual A-Key? Thanks again for your help!
cruise350 said:
Steelrom 2.6 works, you know you can install the epst.apk that works with that dial code seperately.
Click to expand...
Click to collapse
Cruise, can you give me a link to a WORKING EPST.apk, please? Thank you, Sir.
Guys, can anyone help?
I am not even getting the popped up menu for AKEY on the Chogardjr3D ROM and the CleanROM.
ANY help on this would be VERY MUCH appreciated! The only ROM AKEY menu seemed to be working on was the Virus ROM, but as described above, it wouldn't STICK or give me a chance to enter the A-Key. That is after I entered the correct MSL/SPC.
Please help guys! Thank you!
ProFragger said:
Guys, can anyone help?
I am not even getting the popped up menu for AKEY on the Chogardjr3D ROM and the CleanROM.
ANY help on this would be VERY MUCH appreciated! The only ROM AKEY menu seemed to be working on was the Virus ROM, but as described above, it wouldn't STICK or give me a chance to enter the A-Key. That is after I entered the correct MSL/SPC.
Please help guys! Thank you!
Click to expand...
Click to collapse
Guys, just want to confirm. When the AKEY menu DOES work, it just doesn't stick long enough for me to enter the code, AFTER I enter the MSL/SPC Code.
For the folks this code works for, can you please tell me if this is happening for you? You can get your MSL via the MSL Reader from the Market, but it has to be a rooted device. Thanks for ANY HELP you guys can provide, thanks!
What are you trying to do? My stays on long enough to enter my msl code. And I have the epst apk if you still need it
call me Mr.Chow
thizzlemania91 said:
What are you trying to do? My stays on long enough to enter my msl code. And I have the epst apk if you still need it
call me Mr.Chow
Click to expand...
Click to collapse
Trying to enter the A-Key thizzlemania. My stays on long enough for the SPC and MSL as well, but then the menu doesn't come up to actually enter the A-Key and commit. Can you confirm this behavior on yours as well? Thanks!
I just tried it and its working fine here man.
call me Mr.Chow
thizzlemania91 said:
I just tried it and its working fine here man.
call me Mr.Chow
Click to expand...
Click to collapse
You mean the menu comes up fine, and you can actually enter an A-Key?
Wow! Can you confirm what Radio you have and also how to install radios on the EVO 3D ?
I have prl 21080 and pri 1.15. I don't like updating my radios cuz it seems with each update I get less download speeds. But in the dev section there's a thread with all the radios
call me Mr.Chow
thizzlemania91 said:
I have prl 21080 and pri 1.15. I don't like updating my radios cuz it seems with each update I get less download speeds. But in the dev section there's a thread with all the radios
call me Mr.Chow
Click to expand...
Click to collapse
Thanks for the confirmation thizzlemania, and you confirm that you can indeed see the menu long enough to enter an A-Key, right?
I don't think it's the PRL that would affect this kinda thing. Can you maybe share what kernel you're running?
Anyone else have any thoughts on this? Would really, really appreciate this guys!
ProFragger said:
Thanks for the confirmation thizzlemania, and you confirm that you can indeed see the menu long enough to enter an A-Key, right?
I don't think it's the PRL that would affect this kinda thing. Can you maybe share what kernel you're running?
Anyone else have any thoughts on this? Would really, really appreciate this guys!
Click to expand...
Click to collapse
i didn't change anything on the Rom bro
call me Mr.Chow
thizzlemania91 said:
i didn't change anything on the Rom bro
call me Mr.Chow
Click to expand...
Click to collapse
I see, thanks man, and the menu sticks long enough for you to enter the A-Key if you wanted, right?
Just so we're exactly the same, what Kernel are you using? Thanks again bud!
*BUMP... any other help on this guys? Would deeply appreciate it!
Bump again, guys... anyone?
Related
Hi All,
I was just getting ready to flash the new rom posted. I can't get my settings from the dialer anymore? When i put in the ##778# it just calls and gets a busy signal. I'm running the 2.1 rom now. Is there some setting that i should check to get the code to work in the dialer?
Thanks for any help.
Chris
I just called Sprint and told them I accidentally messed it up performing the upgrade on their site... They had no problems reactivating my phone.
Sirhcchris said:
Hi All,
I was just getting ready to flash the new rom posted. I can't get my settings from the dialer anymore? When i put in the ##778# it just calls and gets a busy signal. I'm running the 2.1 rom now. Is there some setting that i should check to get the code to work in the dialer?
Thanks for any help.
Chris
Click to expand...
Click to collapse
\Windows\EPST.exe or \Windows\EPST.lnk will get you to the same screen if you can't get the codes to work in the dialer.
Thanks a bunch, got em!
Hi All,
I have a quick question for you all, Have any one of you running the BAMF 1.4 remix have had troubles dialing *228? I installed this rom last night (LOVE IT! by the way) but when I dialed *228 to update my roaming capablities it quickly aborted. I rebooted it and uninstalled this "voice choice" app I use to filter #'s toin which to use google voice or not but it still aborts. Does anyone else have this issue or is it possibily my phone? Just curious.
I dont get it.
ufabre said:
Hi All,
I have a quick question for you all, Have any one of you running the BAMF 1.4 remix have had troubles dialing *228? I installed this rom last night (LOVE IT! by the way) but when I dialed *228 to update my roaming capablities it quickly aborted. I rebooted it and uninstalled this "voice choice" app I use to filter #'s toin which to use google voice or not but it still aborts. Does anyone else have this issue or is it possibily my phone? Just curious.
Click to expand...
Click to collapse
You're not supposed to be able to dial that period, unless you want to destroy your sim card. It's no longer needed (dialing *228). Search the forums for more details as to why.
yareally said:
You're not supposed to be able to dial that period, unless you want to destroy your sim card. It's no longer needed (dialing *228). Search the forums for more details as to why.
Click to expand...
Click to collapse
Interesting... I did not know that. Before posting this question, I did do a search on "*228" and "Dialing *228" and found nothing. I'll keep searching as to why *228 is no longer needed, I am now really curious ... thanks again
228 was as cdma thing. Not needed with the LTE technology
ufabre said:
Interesting... I did not know that. Before posting this question, I did do a search on "*228" and "Dialing *228" and found nothing. I'll keep searching as to why *228 is no longer needed, I am now really curious ... thanks again
Click to expand...
Click to collapse
sim cards update your prl everytime you reboot the phone, with cdma you had to dial *228 to update your prl profile.
so reboot your phone and you will have latest prl.
Thanks All, Makes sense and clear... Very appreciated!
yareally said:
You're not supposed to be able to dial that period, unless you want to destroy your sim card. It's no longer needed (dialing *228). Search the forums for more details as to why.
Click to expand...
Click to collapse
Yes this is true. I was told this by several verizon reps
ufabre said:
Interesting... I did not know that. Before posting this question, I did do a search on "*228" and "Dialing *228" and found nothing. I'll keep searching as to why *228 is no longer needed, I am now really curious ... thanks again
Click to expand...
Click to collapse
Yea it was in a verizon training...DO NOT *228 this phone or any phone with their 4g sim cards or your sim card will be destroyed...
In settings I Cant See My Phone Number!.. I Dont Know Why!! Can some One Help Me With This!!
But you can make and receive calls? Did you try using the dialer shortcuts to get to hidden phone status and network info?
Post a screen shot of your About Phone page from the phone Settings if you don't mind.
mine is also like this, and it was like that on my old htc magic too. it doesnt stop any functionality but it is odd.
just create a contact called me with your number.
kreoXDA said:
But you can make and receive calls? Did you try using the dialer shortcuts to get to hidden phone status and network info?
Post a screen shot of your About Phone page from the phone Settings if you don't
mind.
Click to expand...
Click to collapse
Yes I can Make And Receive calls...
I Dont Know Much Abt Hidden Shortcuts.. Can U Tell Me Wat Should i Do!!
And YEah This IS The Screen Shot Of The Thing
Crucio_ said:
mine is also like this, and it was like that on my old htc magic too. it doesnt stop any functionality but it is odd.
Click to expand...
Click to collapse
But Mine Wasnt Whn I Got It Brand New On 3.6.2011
joelk2 said:
just create a contact called me with your number.
Click to expand...
Click to collapse
But It Didnt Work!
Mines been like this since day one. Made me have to remember my number right away. I always thought it was odd too. Also, is it normal for your voicemail number to be different? I also get calls from tmobile asking for whom I assume to have my number before
Oops, didn't see what forum I was in. maybe someone still knows.
.
Sent from my SGH-T959V using Tapatalk
In my case, the number shows up in My phone number when i use a T-Mobile SIM...
When i use a Vodafone SIM there is no number (as mentioned in the OP)...
My Handset is original Unlocked - CSC : I9100XEUKD1
Find an old skool phone (Sony Ericsson K800) this should have a menu for your own mobile number, enter it here. This will save your number directly to your SIM and it will appear on your SGS2.
mehtaparth said:
But It Didnt Work!
Click to expand...
Click to collapse
it wont put it in settings but at least you'll always have it handy.
joelk2 said:
it wont put it in settings but at least you'll always have it handy.
Click to expand...
Click to collapse
Itz Not Dat I Dont Remember Ma Number..
It Just Felt OdD!
Hi Guys,
Someone please help. I am not able to connect to the network to make calls. Funnily 3g is working but not able to select Airtel as my network. Dont know what to do.
Regards,
Vijay.
vijaysivakula said:
Hi Guys,
Someone please help. I am not able to connect to the network to make calls. Funnily 3g is working but not able to select Airtel as my network. Dont know what to do.
Regards,
Vijay.
Click to expand...
Click to collapse
Try to Just Clean Cache And Dalvik!! If IT Still Doesnt Work Then Flash A New And Latest ROM
HI Mehta,
I did that a few times and i also flashed the latest firmware for India. i also found out that somehow the phone's imei number has changed. and i have absolutely no idea how that happened. Pls help me with any information you might have.
Regards,
Vijay.
vijaysivakula said:
HI Mehta,
I did that a few times and i also flashed the latest firmware for India. i also found out that somehow the phone's imei number has changed. and i have absolutely no idea how that happened. Pls help me with any information you might have.
Regards,
Vijay.
Click to expand...
Click to collapse
Hey man i dont think your imei no would have changed unless you have been doing something naughty
to the network issue you have you should try flashing the csc for your county, you can find them in the dev section. the csc holds carrier information and details for mms and keyboard languages and such.
when i flash my csc for the uk when my phone reboots i will get a pop up menu that will let me select my vodafone contract as my network.
Hey Crucio,
Nothing naughtier than flashing a custom rom
I have flashed the indian rom version as thats where i am. flashed the csc also that came with the stock but imei doesnt change back. Request some more information on how to change the imei or reset the phone so i can work. Holding the phone of my dreams in my hand and not able to do anything with it.
Regards,
Vijay.
Hi, I have the same problem. It is like that when you get duplicate of your sim or replacement sim. Confirmed with my network.
My sim is not a duplicate or replacement. It is working on my N8 and in another Galaxy S. Not working on my Galaxy S2.
No number in my settings either. Would of been nice to have it showing up.
I am stock and not running any dialer apps. Every time I try to call customer service, either *2 or 1-888-211-4727 I get a message that says network is busy try again later. I can make a call from my other Sprint phone but the EVO 3D won't make a call. Anyone have this happen before? Any ideas how to fix it without doing a factory reset?
Try Dialing 611, or 1-800-639-6111 Instead!
Katz916 said:
I am stock and not running any dialer apps. Every time I try to call customer service, either *2 or 1-888-211-4727 I get a message that says network is busy try again later. I can make a call from my other Sprint phone but the EVO 3D won't make a call. Anyone have this happen before? Any ideas how to fix it without doing a factory reset?
Click to expand...
Click to collapse
Update ur profile and try again...go to menu settings system updates and select update profile....
Sent From My HTC EVO 3D ROOTED
Try #2 instead, I read that that way always works, even without having Sprint Zone installed.
PMGRANDS said:
Try Dialing 611, or 1-800-639-6111 Instead!
Click to expand...
Click to collapse
This worked.
luisrod03 said:
Update ur profile and try again...go to menu settings system updates and select update profile....
Sent From My HTC EVO 3D ROOTED
Click to expand...
Click to collapse
I have tried this a few times and it does not work.
joehunni said:
Try #2 instead, I read that that way always works, even without having Sprint Zone installed.
Click to expand...
Click to collapse
This is not working for me.
Katz916 said:
This worked.
Click to expand...
Click to collapse
It Worked? Cool man, Good to here that!
PMGRANDS said:
It Worked? Cool man, Good to here that!
Click to expand...
Click to collapse
Thanks again. Now if I can get this error code 128 to go away I'll be good. I think that is why I can't use *2 or the 1-888-211-4727 number.
Katz916 said:
Thanks again. Now if I can get this error code 128 to go away I'll be good. I think that is why I can't use *2 or the 1-888-211-4727 number.
Click to expand...
Click to collapse
Check this out, Maybe it'll Help?
http://forum.xda-developers.com/showthread.php?t=1226737
PMGRANDS said:
Check this out, Maybe it'll Help?
http://forum.xda-developers.com/showthread.php?t=1226737
Click to expand...
Click to collapse
That was one of first places I went. Sprint is starting to get calls on this also. I am sure they will come out with something soon. I hope. Thanks again for your help.
Anyone know of a trick to getting AT&T Visual Voicemail to work on Unlocked T-Mobile? The app will install, but not connect during setup process.
Thank you in advance for any help you can provide.
****EDIT*** It turns out that is was an AT&T issue when they provisioned my SIMS for LTE they didn't setup my email.
Thanks everyone for the help!
chrispyutec said:
Anyone know of a trick to getting AT&T Visual Voicemail to work on Unlocked T-Mobile? The app will install, but not connect during setup process.
Thank you in advance for any help you can provide.
Click to expand...
Click to collapse
I have it working just fine. I downloaded the app from the app store and opened it up. After opening the app, I was prompted to dial my voicemail. Then entered my password. I had no new messages so I closed it out and then was prompted to enter my voicemail password in visual voicemail. Haven't had any issues. I am using an international ROM as well
slimc84 said:
I have it working just fine. I downloaded the app from the app store and opened it up. After opening the app, I was prompted to dial my voicemail. Then entered my password. I had no new messages so I closed it out and then was prompted to enter my voicemail password in visual voicemail. Haven't had any issues. I am using an international ROM as well
Click to expand...
Click to collapse
Wonder why I'm having a problem. I'm running Alliance rom from the international thread. It ask me to enter the 10 digit mail box number of the person I'm trying to reach and when I enter my phone number it says sorry can't find the mail box. A third party app works so I'm wondering if my problem might be carrier related.
Thank you for your response.
chrispyutec said:
Wonder why I'm having a problem. I'm running Alliance rom from the international thread. It ask me to enter the 10 digit mail box number of the person I'm trying to reach and when I enter my phone number it says sorry can't find the mail box. A third party app works so I'm wondering if my problem might be carrier related.
Thank you for your response.
Click to expand...
Click to collapse
Which version of Alliance are you using? I'm using V3.1 and haven't had any issues.
slimc84 said:
Which version of Alliance are you using? I'm using V3.1 and haven't had any issues.
Click to expand...
Click to collapse
i'M ON 3.1 I think it's carrier related because it does the same on other roms. Plus I had to get AT&T to provision my sim card for LTE. I'm sure they screwed something up.
chrispyutec said:
i'M ON 3.1 I think it's carrier related because it does the same on other roms. Plus I had to get AT&T to provision my sim card for LTE. I'm sure they screwed something up.
Click to expand...
Click to collapse
That's odd. I didn't have to do any of that. I purchased my phone from T-Mobile, SIM unlock through Cellunlocker.net, changed my APN settings and I was good to go. It shouldn't make a difference as I am using an unlocked T-Mobile variant and my VVM is working fine. Send me a PM around 7PM EST or so and I can see if I can get it working for you.
slimc84 said:
That's odd. I didn't have to do any of that. I purchased my phone from T-Mobile, SIM unlock through Cellunlocker.net, changed my APN settings and I was good to go. It shouldn't make a difference as I am using an unlocked T-Mobile variant and my VVM is working fine. Send me a PM around 7PM EST or so and I can see if I can get it working for you.
Click to expand...
Click to collapse
I'm using SIM unlocked T-Mobile on AT&T. I have my APN set just like my wife's AT&T S5.
slimc84 said:
That's odd. I didn't have to do any of that. I purchased my phone from T-Mobile, SIM unlock through Cellunlocker.net, changed my APN settings and I was good to go. It shouldn't make a difference as I am using an unlocked T-Mobile variant and my VVM is working fine. Send me a PM around 7PM EST or so and I can see if I can get it working for you.
Click to expand...
Click to collapse
Problem solved. It was AT&T that had something screwed up. I want to thank you so much for trying to help and offering the PM for additional direct help. People like you what makes XDA as awesome as it is!!! I hit your thanks button.
chrispyutec said:
Problem solved. It was AT&T that had something screwed up. I want to thank you so much for trying to help and offering the PM for additional direct help. People like you what makes XDA as awesome as it is!!! I hit your thanks button.
Click to expand...
Click to collapse
I'm glad that you got it taken care of. I know how frustrating it can be for a phone not to function as intended.