Hey, guys, a few Questions about Cyanogend
1. I've installed Cyanogend 7.1.1, can i still install a custom kernel like this one?
2. Which is the best CPU Control Tool for my Xperia Neo?
3. Do you have Tips for better battery lifetime?
f.e profile tools with CPU Control, etc?
Thanks,
renes2 said:
Hey, guys, a few Questions about Cyanogend
1. I've installed Cyanogend 7.1.1, can i still install a custom kernel like this one?
2. Which is the best CPU Control Tool for my Xperia Neo?
3. Do you have Tips for better battery lifetime?
f.e profile tools with CPU Control, etc?
Thanks,
Click to expand...
Click to collapse
1. Problably No...but anyway you dont need custom kernel for CM7
2. SetCpu. SetXperia 1.20
3.screen off profiles, smartass, incredi control.
Regards!
Taavi
Sent from my MT15i using Tapatalk
Big Thanks, but waht is incredi. Control?
renes2 said:
Big Thanks, but waht is incredi. Control?
Click to expand...
Click to collapse
With incredi control you can change cpu voltages. "EXTREME CAUTION" with this, but if you do all right you saves you battery a lot
And you find this app in market "incredi control"
And in setxperia is this builtin.
Sent from my MT15i using Tapatalk
Ah, okay.
My problem, is, that i have with
368Mhz, 210mA
122Mhz, -170mA
-_-
Its too much, i've installed cyanogen 7.1, Any ideas?
EDIT: or do someone have the Voltages?
f.E.
XXX mV @ 122Mhz
XXX mV @ 244Mhz etc?
Related
Hi All,
All the features are incorporated in the MiniCM6 v 1.0.1 found here
Hit Thanks if you like my post
facing too much reboot after this update check for bugs
thnx
sachith024 said:
Hi All,
I just integrated doixanh modules into a update.zip file. I claim no credit.
MultiTouch v005
UnderVolt v001
MDDI v001
OverClock 249/748 (no module)
Xrec installable
Hit Thanks if you like my post
Click to expand...
Click to collapse
check wifi folder it may be the problem
sachith024 said:
Hi All,
I just integrated doixanh modules into a update.zip file. I claim no credit.
MultiTouch v005
UnderVolt v001
MDDI v001
OverClock 249/748 (no module)
Xrec installable
Hit Thanks if you like my post
Click to expand...
Click to collapse
This is fixed version
working fine for me
its with the default over-clocking(710)
thnx
abhi98228 said:
This is fixed version
working fine for me
its with the default over-clocking(710)
thnx
Click to expand...
Click to collapse
Works very well for me your fixed version.Thank you !
Since installing this my battery life has literally more than doubled so for that alone you have my thanks, wouldn't of installed the seperate modules but you have made it easy, good work
Sent from my X10mini using XDA App
Hi,
Thanks for the collection of updates. I for one, have also experienced the rebooting bugs.
I think the undervolting of the phone makes it reboot. I have especially experienced the rebooting when the phone tries to reconnect to wifi after being idle for some time. Maybe it draws too much current for the idle condition to supply enough power, and therefore reboots the phone?
Regards,
mfas
nice nice only why undervolt AND overclock the overclock module is already undervolted
owain94 said:
nice nice only why undervolt AND overclock the overclock module is already undervolted
Click to expand...
Click to collapse
nice nice only why undervolt AND overclock the overclock module is already undervolted
Nice work, that was my first idea with tweaks, but... i dont have a mini so i cannot test...
owain94 said:
nice nice only why undervolt AND overclock the overclock module is already undervolted
Click to expand...
Click to collapse
the overclock module is not included in this.
overclock applied through hw_config.sh
echo freq > /sys/devices/system/cpu/cpu0/cpufreq/scaling_<min or max>_freq
again... borrowed from D4rKn3sSyS...thanks to him
mfas said:
Hi,
Thanks for the collection of updates. I for one, have also experienced the rebooting bugs.
I think the undervolting of the phone makes it reboot. I have especially experienced the rebooting when the phone tries to reconnect to wifi after being idle for some time. Maybe it draws too much current for the idle condition to supply enough power, and therefore reboots the phone?
Regards,
mfas
Click to expand...
Click to collapse
not sure y its happening... one of my friend is also facing problem with v1
use abhi's or v2 .zip and let me know if it works for you.
will do some more experiments and update if required
Thank you for this compilation, just a few questions though, I want to clarify something..
1. Just want to ask if what I did was right: renamed zip file to update.zip and installed via xrec, correct?
2. How can I test all modules if it worked?
Thanks and regards,
Xaeons
Xaeons said:
Thank you for this compilation, just a few questions though, I want to clarify something..
1. Just want to ask if what I did was right: renamed zip file to update.zip and installed via xrec, correct?
2. How can I test all modules if it worked?
Thanks and regards,
Xaeons
Click to expand...
Click to collapse
1. UV- battery life increases
2. MDDI lag... its hardly noticable
3. MT- download multi touch visualizer from market and test it
4. OC- install set cpu and check the max n min freq...
Thanks satchith, I'll test it on the ff days..
Though when I tried Quadrant Advanced, back then my average was between 900-1000, now its 1100-1200..
hello guys,
i noticed that when i install the existing module the brightnes of the phone lowers ,do you know anything about that?
thank you
mitsos16x said:
hello guys,
i noticed that when i install the existing module the brightnes of the phone lowers ,do you know anything about that?
thank you
Click to expand...
Click to collapse
Thanks for ur feedback, brightness issue fixed. Please test and let me know
Hello!
This Files Works On Stock SE ROM?
dark_zhero said:
This Files Works On Stock SE ROM?
Click to expand...
Click to collapse
HTML:
echo freq > /sys/devices/system/cpu/cpu0/cpufreq/scaling_<min or max>_freq
Works well
Is ther ny update in MDDI or Undervolt????
I'm using the InParisv4 Rom. Is anyone using SetCPU with this? If so, what overclock setting is working for you?
If you want to overclock, you need an overclockable kernel. Paris v4 uses the stock kernel. Flash Pershoot's kernel and you'll be able to overclock to 1.4ghz.
Don't forget the "thanks" button if this helps you.
Thank you! I already flashed Pershoot's kernel over that ROM. Was just afraid to overclock too high and then cause performance issues with my tab. But I will go on ahead and overclock to 1.4. Thanks slack.. will click the 'thanks' button right now! And please.. if anyone is aware of a reason why I should NOT do this, please advise
Please use the Q&A Forum for questions Thanks
Moving to Q&A
My tab runs perfectly stable at 1.4 ghz. If you have trouble just clock back down.
Sent from my DROID2 using XDA App
Thanks FillTheVoid... so just to be sure, do I just set the Min and Max to 1.4ghz?
seanmack said:
Thanks FillTheVoid... so just to be sure, do I just set the Min and Max to 1.4ghz?
Click to expand...
Click to collapse
set the max to 1.4 but leave the min on the lowest setting.
I just installed In Paris v4 ROM into my tab, and flashed pershoot's kernel. However when I go into SetCPU, the max is still only 1.0Mhz. Could I have used the wrong kernel? I used the TW UX one.
mrhazey said:
I just installed In Paris v4 ROM into my tab, and flashed pershoot's kernel. However when I go into SetCPU, the max is still only 1.0Mhz. Could I have used the wrong kernel? I used the TW UX one.
Click to expand...
Click to collapse
Did setcpu ask for SU permissions? If not, go and open up superuser quickly and try again.
Don't forget to click thanks if this helped you!
DaAwesome1 said:
Did setcpu ask for SU permissions? If not, go and open up superuser quickly and try again.
Don't forget to click thanks if this helped you!
Click to expand...
Click to collapse
It was set for permissions. I just reinstalled SetCPU and then it worked right away, weird. Thanks though!
Is setcpu free? If so where can I find it?
its a paid app, but its free for xda members. just search for setcpu 2.2.4 and it should come up.
edit: found it for you:
http://forum.xda-developers.com/showthread.php?t=505419
Thank you for that Jager555
I prefer interactive cpu governor over ondemand.
My SGA is on GB 2.3.6 (Russian ROM) and I have installed No-Frills CPU, but I am not able to use it to full potential. The Developer says I need some custom Kernels for this.
Which Kernels are these? Is it ok to use diff kernels?
what do u mean by "full potential"?
afaik for changing cpu scaling freq, cpu governor or changing disk io scheduler, u can do it even on stock kernel. maybe the selection is a little bit less, but it'll definitely works.
i dont know if cpufrills can also change cpu voltage, even so we dont have any kernel that support cpu voltage changing yet.
You might have seen No-Frills cpu, but few users are getting more governors than me using some diff kernel.
anyways, I want some other way, so that my cpu cuts down frequency really down when phone is locked, and jump up accoring to requirement. (Just like Cool'n quiet in AMD)
then u might wanna install cfroot kernel. it contain smartassv2 and interactiveX that do have automatic cpu down scaling when screen off.
but u can also set up profile to do it manually on other governors using setcpu.
What about the kernel by squadzone supposedly optimised for gingercruzt but it works for cm7 and has 6 IO schedulers, but cf-root is best for stock
Sent from my GT-S5830 using xda premium
My phone is already rooted and got busybox. So if I use cfroot, what would the affect on previous root and busybox? How do I backup current kernel if I need to go back.
animal_he said:
My phone is already rooted and got busybox. So if I use cfroot, what would the affect on previous root and busybox? How do I backup current kernel if I need to go back.
Click to expand...
Click to collapse
no, it wont affect root as it also give root.
and just use clockworkmod recovery to create backup of ur whole rom. and if u just wanna restore kernel use the advance restore to restore just the kernel itself
an0nym0us_ said:
then u might wanna install cfroot kernel. it contain smartassv2 and interactiveX that do have automatic cpu down scaling when screen off.
but u can also set up profile to do it manually on other governors using setcpu.
Click to expand...
Click to collapse
Hey, I'm using ICS Final and I only have the InteractiveX and normal Interactive options but not the smartassV2. Where can I get it? I'm using the Smartass governor out of all of them. What is the difference between the two? (V1 & V2)
Thanx a lot for all the info mate. Can u just help me find one appropriate for my phone?
Version 2.3.6
Build number .XXKPP
SuperAce609 said:
Hey, I'm using ICS Final and I only have the InteractiveX and normal Interactive options but not the smartassV2. Where can I get it? I'm using the Smartass governor out of all of them. What is the difference between the two? (V1 & V2)
Click to expand...
Click to collapse
Install zImage-Mod v1.0 (you can find it in the Development Section).
Hi!
I have been using advanced stock kernel for few months on 4.0.2.A.0.62 running on 1.4 - 1,8 GHz.
It works very fine, good battery life.
I found in original post: Added Voltage Change support but I can't UV the phone.
Does anyone know a solution?
Thank's
farmakos said:
Hi!
I have been using advanced stock kernel for few months on 4.0.2.A.0.62 running on 1.4 - 1,8 GHz.
It works very fine, good battery life.
I found in original post: Added Voltage Change support but I can't UV the phone.
Does anyone know a solution?
Thank's
Click to expand...
Click to collapse
Use SetXperia : http://forum.xda-developers.com/showthread.php?t=1269698
Mr.HoàngVN said:
Use SetXperia : http://forum.xda-developers.com/showthread.php?t=1269698
Click to expand...
Click to collapse
I tryed SetXperia but it doesn't work properly. After setting custom voltages phone is reset several times.
I changed kernel to 10.1 and now I can do all modifications.
Thank's for response.
So, I've upgraded my Siyah Kernel to the latest version and set the CPU UNDERVOLTING to -100mV(default is -No Undervolting), governor to lulzactiveq, max frequency to 1.6(default is 1.4) and voltage control to 1325000 uV (default is 1350000)
Is this safe ? No crashes so far.
Yes there is no problem..,..
Read siyah kernels information its very helpful to you.....
If you face some sort of problems go to siyah setting and hit on default setting.....
Sent from my GT-I9300
Here is screenshots for you.....
Reset setting for default.......
Sent from my GT-I9300
rockondudu said:
Yes there is no problem..,...
If you face some sort of problems go to siyah setting and hit on default setting.....
Sent from my GT-I9300
Click to expand...
Click to collapse
I just had a freezae and needed to remove the battery to reboot it again. Advice of going one step lower to 1.5 ? or increase a few voltage @ 1.6?
is 1400000 good for 1.6?
rockondudu said:
Here is screenshots for you.....
Reset setting for default.......
Sent from my GT-I9300
Click to expand...
Click to collapse
Thanks for the screenshot
P.S : I think the problem is my rom, because its freezing, except for 1.5(stable). Rom is OMEGA 33.3
Well i rebooted my s3 , 1.6 oc and voltage control to default and uv @ -100mV. Its stable. Stay with this?