[Q] T-01C Radio Band help ! - TG01 General

Sorry to post T-01C question in TG01 forum. This Android phone is from NTT Docomo , and in China we use a cracked SIM sticker ( Mr SIM ) to cheat the network so as to make phone calls. But today I accidently chose the Radio Band GSM/UMTS as USA band, now I cannot switch it back and lost and network connection. I know you guys have been using T-01C’s Android Kernel to develop TG01’s Android Rom, could anyone give me some suggestion how to get the right Radio back? When the radio is on there is only one option US band to select; if radio is off, there are more options like AU , JAPAN band etc., but no matter which one I choose, just cannot set it successfully even the system is rooted.
T-01C have been updated in May from OS 2.1 to 2.2 while Radio from 5011.1906.50 to 5014.1906.11. Now I download the 2.2 ROM from official website and try to use T01C_SWUpdater01.apk to flash, it fails because I already use the latest OS.
Could anyone help me on this? Thanks for reading!

Related

How to make SX56 work in India?

Hi All,
I have an unlocked SX56 device on which I have installed xda-dev ROM w/ WM2003SE (version 4.20.0) and is working properly here in USA on Cingular.
I recently went to India and hoped that it would automatically work there on band 900 but to my surprise it didn't. I tried a local simcard there but it always said no service.
I did some research and found out about bandswitch tool.
I copied it on to the device but when I click it shows ERROR for the current band and nothing happens when I click on either 900 or 900/1800 or 1900.
I am going to India again in few weeks and am wondering if there's something else I can do to make it work?
Thanks in advance.
-D
here is some more info about the device.
code on the back: PW10B1
ROM version: A.30.09 ENG
Radio version: M.E1.19
Protocol version: 324e4
Hey bud!
Unfortunately... you will have to get into the bootloader and manually switch bands.
It will work.
Also which service provider did you use when you were in India? and in what location?
Lemme know if you face any issues.
cheers!
Diki

Flashing the Japanese T01a radio into my TG01.

Hello my friends,
I have an unlocked TG01 from Orange and I am living in Japan. I would like to flash my radio to the Japanese Docomo 5005.1901.1.20 radio.
My device often resets upon boot and it happens at the precise time it is trying to connect to the cell tower. I see the little cell icon pop up and then my device will hang and then reboot. To correct this problem I would like to flash the Japanese radio into my device.
Is this a good idea or a bad idea? Has anyone done this before? Will my device become sim locked to the Docomo network? What is a good radio to use in Japan (Maybe the Chinese radio)? Right now I am using 5005.1600.05.
Thanks so much for everything ppl,
-Kilihari.
Kilihari said:
Hello my friends,
I have an unlocked TG01 from Orange and I am living in Japan. I would like to flash my radio to the Japanese Docomo 5005.1901.1.20 radio.
My device often resets upon boot and it happens at the precise time it is trying to connect to the cell tower. I see the little cell icon pop up and then my device will hang and then reboot. To correct this problem I would like to flash the Japanese radio into my device.
Is this a good idea or a bad idea? Has anyone done this before? Will my device become sim locked to the Docomo network? What is a good radio to use in Japan (Maybe the Chinese radio)? Right now I am using 5005.1600.05.
Thanks so much for everything ppl,
-Kilihari.
Click to expand...
Click to collapse
Somebody from this forum tried to flash 5005.1901.20 radio but something gone wrong and he bricked his device (I can't remember details)...
Actually 5005.1600.05 is the chinese radio version...
Kilihari said:
Hello my friends,
I have an unlocked TG01 from Orange and I am living in Japan. I would like to flash my radio to the Japanese Docomo 5005.1901.1.20 radio.
My device often resets upon boot and it happens at the precise time it is trying to connect to the cell tower. I see the little cell icon pop up and then my device will hang and then reboot. To correct this problem I would like to flash the Japanese radio into my device.
Is this a good idea or a bad idea? Has anyone done this before? Will my device become sim locked to the Docomo network? What is a good radio to use in Japan (Maybe the Chinese radio)? Right now I am using 5005.1600.05.
Thanks so much for everything ppl,
-Kilihari.
Click to expand...
Click to collapse
I want flash a Japanese rom too...

[Q] 2g and 3g internet connections are not working on my atrix.

i have activated my data plan with my carrier but there is only a 2g or 3g icon showing beside the signal bars with no download and upload signs and i configured my APNs and still.i was thinking about flashing a newer or another radio for my atrix..i am an international user from asia with a unlocked carrier and i have an unlocked bootloader and a rooted cell phone...so all im asking for is that if there is any relation between the radio firmware version and the not working 2g and 3g connection..should i flash a new radio ? what radio is right for me? do i have to flash a specific radio for my area or it dosent matter?.. and is there anyway i can harm my cell phone by flashing a radio???.. plz give me some links for radios and internationnal radios..
thx so much i apreciate anyone answering me and thx for help
Are you the same person who has posted this question almost identically in other threads under a different username?
yup this is me but no one helped or answered me thats why im here..so plzzzzz help me i need to know

GSM noise during phone call in GSM MODE - Baseband version ?

Hi everybody,
i read several forums regarding the gsm noise problem during a phonecall in 2g (gsm mode) with the Xperia S.
For those devices, it doesn't matter if you change the carrier or the the Simcard itself, it is still the same effect.
1) I have unrooted german Xperia S, running the newest manufacturer version 4.0.4
Carrier is T-Mobile
2) My work partner has the same phone but with carrier branding (T-Mobile) , running newest manufacturer version 4.0.4
Carrier is T-Mobile
What i alread did:
- I put my sim card in the branded 2) phone and didn't had those gsm noises in 2g mode.
- I figured out that he has also a better Wifi receiption at the exact same position then my 1) phone
- I took a look at the baseband version and saw that he has a newer one than me with his branded phone ? (Attachment)
The search function didn't brought me further so i was forced to creat this thread in the Q&A area (hopefully the right one)
I want to upgrade my baseband version to the same mentioned version.
Guess I have to root it first etc.
Anyway, is there any database with baseband versions for the Xperia s incl. tutorial etc. ?
Thanks for helping in advance

Can i convert a US version device to Europe?

Hello,
I was wondering if is possible to flash Europe's model Firmware on US model,and get the device work?
I want to do this because I am in Europe and I cannot connect to LTE networks because my oneplus X is US version. So I want to change the firmware to european version to be able to connect to band 3 - 1800Mhz networks that are not supported on US version.
If this is not possible, is there any solution to change the frequency and the band of the device?
Thank you
The firmware is the same. It's the hardware that change.
You can't do anything about that I'm afraid..
https://forums.oneplus.net/threads/oneplus-x-regional-versions.398205/
Sorry forgot to mention that it's the antenna :
https://www.reddit.com/r/oneplus/comments/4hvcrt/is_it_possible_to_switch_the_opx_from_european/
Hello, thanks for your answer.
I saw this article : https://forum.xda-developers.com/oneplus-3/how-to/guide-unlock-additional-lte-bands-t3519563
and that is why I was wondered if is possible to work on our onyx device.
I knew it was possible on some Xiaomi devices too, but I didn't know some OP could do it too...

Categories

Resources