I am using gingercruzt 1.3 (I use the P500) and I saw some very good characteristics of this rom:
1. Do tweak more scrip than the other rom.
2. Options undervolt your computing power to work well with the best.
3. Option "use 16 bit transparency" to help smooth over but the picture may change significantly.
So why not use this to apply to the other rom, this is fairly or that.
khoa02061986 said:
I am using gingercruzt 1.3 (I use the P500) and I saw some very good characteristics of this rom:
1. Do tweak more scrip than the other rom.
2. Options undervolt your computing power to work well with the best.
3. Option "use 16 bit transparency" to help smooth over but the picture may change significantly.
So why not use this to apply to the other rom, this is fairly or that.
Click to expand...
Click to collapse
You can't undervolt a MSM7x27 chipset...
terratrix said:
You can't undervolt a MSM7x27 chipset...
Click to expand...
Click to collapse
But the custom of Ginger Cruzt is that you, in setting, gingercruzt setting, performance.
khoa02061986 said:
But the custom of Ginger Cruzt is that you, in setting, gingercruzt setting, performance.
Click to expand...
Click to collapse
No, that do not work actually, it only works with xperia x8, as this is a xperia x8 port over, so its just aesthetics. Any undervolting in our device is impossible.
terratrix said:
No, that do not work actually, it only works with xperia x8, as this is a xperia x8 port over, so its just aesthetics. Any undervolting in our device is impossible.
Click to expand...
Click to collapse
But x8 also has a msm7227 chipset,then how does it work there??
ashishv said:
But x8 also has a msm7227 chipset,then how does it work there??
Click to expand...
Click to collapse
I think it's because P500 have a different voltage set and kernel than in xperia x8
boykioy not so nice where you can have a certain utility, when you stick with that option, the machine is less clear energy
terratrix said:
I think it's because P500 have a different voltage set and kernel than in xperia x8
Click to expand...
Click to collapse
So if someone is able to make an undervolt kernel,it might work on our phone,right?
ashishv said:
So if someone is able to make an undervolt kernel,it might work on our phone,right?
Click to expand...
Click to collapse
well, if you can apply to every rom, it will open an "era" less energy to P500 android particular and general. kekekeke
As i saw in xperia x8 forum, undervolt didn't have a great effect on battery, and undervolting in our phones(eventhough impossilble) will affect stability even at 600MHZ
terratrix said:
As i saw in xperia x8 forum, undervolt didn't have a great effect on battery, and undervolting in our phones(eventhough impossilble) will affect stability even at 600MHZ
Click to expand...
Click to collapse
how to test the "stability" it? Check with any energy?
Besides, do you think about custom "use 16 bit transparency" ?
khoa02061986 said:
Besides, do you think about custom "use 16 bit transparency" ?
Click to expand...
Click to collapse
Well, it works, because i think Optimus One does not support 32bit framebuffer...
---------- Post added at 05:04 PM ---------- Previous post was at 05:04 PM ----------
khoa02061986 said:
how to test the "stability" it? Check with any energy?
Click to expand...
Click to collapse
Stability as in your won't get any random reboots, kernel panic etc
I find the immediate use gingercrust 1.3 quite well, wait a while longer to see the problem on that something was wrong, then I will change rom
Our kernel does noot support undervolt, the settings are there in the rom but it is not supported.
Other than that, it has many many tweaks, and as a resulkt the scrolling is smoother that any available rom and the responce is very very good.
Thanks
Sent from my LG-P500 using xda premium
Related
hello guys,
its my 2nd day with blackbird(optimus net rom ported by mattof93) now and it seems really promising!
quite impressed with its performace,responsiveness..
initally it was slow,but after flashing paulo v6 touchfix kernel it became really good!
only big bug im suffering from is that usb mass storage doesnt work
however we can go to recovery and toggle usb there and use it!
other than that really small bugs expected to be fixed like autofocus,not switching on nce battery drains to 0%(remove battery and replace) !
so here im sharing a few screenshots of the rom!
i tested neocore yesterday and score was somehwere around 60-64fps (without sound) !mind its a stock modified rom..
games like asphalt 5,dungeon hunter,nfs shift,hero of sparta etc work flawlessly and quite smoothly!
most imprtant it has darktremors a2sd working really well!
have a look at it and if u like just grab it from dev thread ..
guys please vote !!poll on top of the page
some info as provided by matt on performace by kernel :
matteof93 said:
some bench's results:
Paolo's kernel
245\729 smoothass io:deadline vsync: on
antutu: 1529
neocore: 62.4 fps
Franco's kernel:
245\729 smartassv2 io:deadline vsync: on
antutu: 1552
neocore: 61.8 fps
Zacks' kernel
245\729 lightassv2 io:deadline vsync: off
antutu: 1564
neocore: 64.3 fps
Click to expand...
Click to collapse
continuation
Lol... Barack Obama in call logs
BTW how is the battery backup.
Sent from my LG-P500 using XDA App
Battery seams normal but with 3g it drains !just like any other rom
Sent from my LG-P500 using xda premium
Do u use other cm7 based roms before ? If yes whats your opinion comparing with them ?
Zacker90 said:
Do u use other cm7 based roms before ? If yes whats your opinion comparing with them ?
Click to expand...
Click to collapse
i have used almost all the available roms!!
cm7 is cm7!!thats something different cos the entire framework and sources are different!!
however with rc2 and paulo touchfix and a few app management in hand ,i feel this rom attracts me a lot!!!
however this is just rc2!!the stable release will definitely more rocking!hope sodunno when matt is goin to release but hez working on it and has promised to never stop developing on this rom!
androidusero1p500 said:
i have used almost all the available roms!!
cm7 is cm7!!thats something different cos the entire framework and sources are different!!
however with rc2 and paulo touchfix and a few app management in hand ,i feel this rom attracts me a lot!!!
however this is just rc2!!the stable release will definitely more rocking!hope sodunno when matt is goin to release but hez working on it and has promised to never stop developing on this rom!
Click to expand...
Click to collapse
Sorry for being this irritating 'questionare' but could you test asphalt 5 for me?
what's next (RC3):
rom partially deodexed
custom framework
some changes to scripts in init.d and build.prop
new kernel
androidusero1p500 could you add a survey to decide which kernel will be used by default in the RC3?
these are the options:
rome kernel by zacks (better performance)
franco kernel (best compromise between performance and stability)
paolo's kernel (the only kernel which solve the scrolling "bug")
matteof93 said:
what's next (RC3):
rom partially deodexed
custom framework
some changes to scripts in init.d and build.prop
new kernel
androidusero1p500 could you add a survey to decide which kernel will be used by default in the RC3?
these are the options:
rome kernel by zacks (better performance)
franco kernel (best compromise between performance and stability)
paolo's kernel (the only kernel which solve the scrolling "bug")
Click to expand...
Click to collapse
Finally i am willing to flash this rom
waiting for the update
Rutuj said:
Sorry for being this irritating 'questionare' but could you test asphalt 5 for me?
Click to expand...
Click to collapse
Didn't you read what i had written in the first post?
I already tested..works great;-)
Sent from my LG-P500 using xda premium
matteof93 said:
what's next (RC3):
rom partially deodexed
custom framework
some changes to scripts in init.d and build.prop
new kernel
androidusero1p500 could you add a survey to decide which kernel will be used by default in the RC3?
these are the options:
rome kernel by zacks (better performance)
franco kernel (best compromise between performance and stability)
paolo's kernel (the only kernel which solve the scrolling "bug")
Click to expand...
Click to collapse
I think no one would compromise for the scrolling bug !so obviously I'm predicting anyone would recommend paulo 's kernel
Sent from my LG-P500 using xda premium
androidusero1p500 said:
I think no one would compromise for the scrolling bug !so obviously I'm predicting anyone would recommend paulo 's kernel
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
i agree....anyway, please add this survey
matteof93 said:
i agree....anyway, please add this survey
Click to expand...
Click to collapse
Check your pm
Sent from my LG-P500 using xda premium
@androiduser01p500
What version of the rom are u using?
The firestorm or the ICS rom?
Ohh and +1 for paulos kernel in rc3
How are you getting 60 fps??
Im getting 50 at OC 480/729 smartass
Rutuj said:
How are you getting 60 fps??
Im getting 50 at OC 480/729 smartass
Click to expand...
Click to collapse
governor? io scheduler? kernel?
I'm using firestorm n was clocked @122-787 interactive /smartass(dun remmber xactly wich one i was usin).. paulo v6 touch kernel!with darktremor a2sd..
I get minimum 60-62fps ..with ram running at 200mb ..(don't prefer killing em)..
Also I'm using autokiller memory manager pro(plays with minfree also)from market ,it has an option called adanced tweaks too..could that be the reason?
Editrutuj the values i mentioned was without sound !also could you give feedback on your experience with the rom?
Sent from my LG-P500 using xda premium
androidusero1p500 said:
I'm using firestorm n was clocked @122-787 interactive /smartass(dun remmber xactly wich one i was usin).. paulo v6 touch kernel!with darktremor a2sd..
I get minimum 60-62fps ..with ram running at 200mb ..(don't prefer killing em)..
Also I'm using autokiller memory manager pro(plays with minfree also)from market ,it has an option called adanced tweaks too..could that be the reason?
Editrutuj the values i mentioned was without sound !also could you give feedback on your experience with the rom?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Ok.
Im running firestorm using paulos v6touch kernel at 480/729 smartass, OC using setcpu.
Im also using zepellinrox's v6supercharger, aggressive settings.
The neocore came upto 56~55..The gaming is superb especially HD games.
So, will autokiller memory manager mess up with v6 supercharger settings?
p.s. - Whats the ETA for rc3 ?
Rutuj said:
Ok.
Im running firestorm using paulos v6touch kernel at 480/729 smartass, OC using setcpu.
Im also using zepellinrox's v6supercharger, aggressive settings.
The neocore came upto 56~55..The gaming is superb especially HD games.
So, will autokiller memory manager mess up with v6 supercharger settings?
p.s. - Whats the ETA for rc3 ?
Click to expand...
Click to collapse
Why do you even need autokiller when you have v6supercharger.....Its the same thing
Rutuj said:
Ok.
Im running firestorm using paulos v6touch kernel at 480/729 smartass, OC using setcpu.
Im also using zepellinrox's v6supercharger, aggressive settings.
The neocore came upto 56~55..The gaming is superb especially HD games.
So, will autokiller memory manager mess up with v6 supercharger settings?
p.s. - Whats the ETA for rc3 ?
Click to expand...
Click to collapse
yeah auotkiller mm is simialr to v6 supercharger!
but i heard supercharger is something more than amm!
however you get 55-56 without sounD?
im getting constand scores above 61fps!with 122-787mhz,around 40-60 apps installed a lot of em in there and a lot of ram constanly being used!!
like when i ran neocore i had about 180-200mb free!
i have a problem don't know if it's related to my custom kernel i use inteks v15 , my neo some times randomly sets it's cpu maximum frequancy to as little as 122mhz only !!
max freq = 122mhz
min freq = 122mhz
and it happens randomly i mean RANDOM !! the device just becomes so laggy even the simplest stuff become laggy and i have to reset the maximum allowed cpu frequancy again to 1401mhz using sexperia to make the device act normal again !
hope some one can clear this up for me......
which kernel you use?
electrash said:
which kernel you use?
Click to expand...
Click to collapse
inteks v15 i first noticed this after installing launcher pro but i doubt it has anything to do with this cpu throttling problem
try to unistal that app :/
Maybe you are using 2 similiar cpu frequency changing app.
Uninstall all cpu apps and clear data all those apps.
Sent via my FXP 046 MT15i®
taaviu said:
Maybe you are using 2 similiar cpu frequency changing app.
Uninstall all cpu apps and clear data all those apps.
Sent via my FXP 046 MT15i®
Click to expand...
Click to collapse
Same here, but I think that taaviu is right. I have ROM Toolbox and CPU Tuner installed, both can set the cpu.
sdk16420 said:
Same here, but I think that taaviu is right. I have ROM Toolbox and CPU Tuner installed, both can set the cpu.
Click to expand...
Click to collapse
That's my point.
I use cm7..there is built-in already cpu setting and when I use setcpu and 2 more cpu apps, then I get terrible laggy phone.
Sent via my FXP 046 MT15i®
sdk16420 said:
Same here, but I think that taaviu is right. I have ROM Toolbox and CPU Tuner installed, both can set the cpu.
Click to expand...
Click to collapse
does your phone throttles it's max frequency to 122mhz automatically and randomly too ?
also i only got setxperia , i.e no other cpu controlling apps , i may have installed setcpu before but i deleted it long ago before i start using setxperia !!
what do you think ? what could be the cause of this maybe some one can help us more ?
thanks all !
You don't lose anything if you uninstall setxperia.
And if problem after that dissapears...
Sent via my FXP 046 MT15i®
Here this has happened to me also
So there all right uninstall all apps that change CPU. And if any use just setcpu
If it's happens just a few times then no lasting damage just the fact it may not wake up for a bit but hitting power button fast sorts that just dont set these apps to run at boot and you should have no bother sorry just seen ya post n though ad say
Peace
Sent from my MT15i using xda premium
taaviu said:
That's my point.
I use cm7..there is built-in already cpu setting and when I use setcpu and 2 more cpu apps, then I get terrible laggy phone.
Sent via my FXP 046 MT15i®
Click to expand...
Click to collapse
i use FXP047 ... do we already have a cpu controlling app? where and what? i just installed set xperia...
chacho_2me said:
i use FXP047 ... do we already have a cpu controlling app? where and what? i just installed set xperia...
Click to expand...
Click to collapse
Under cynogen settings - perfomance - cpu settings.
Sent from my MT15i using Tapatalk
taaviu said:
Under cynogen settings - perfomance - cpu settings.
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
hahaha..usually this part i dont touch..but now i did..thanks dude... hmmm.. any one here knows how to tweak it? like more power means more battery consumption? still.. i did install a game called fruit ninja..but at 1.4Ghz..still little bit lagging after few seconds of gaming...huhuhu...
chacho_2me said:
still.. i did install a game called fruit ninja..but at 1.4Ghz..still little bit lagging after few seconds of gaming...huhuhu...
Click to expand...
Click to collapse
This sounds like memory problem.
1,4Ghz is enough for playing.
What governor your using?
Sent from my MT15i using Tapatalk
i tried the ondemand and the smartass... and i still have the interactive and scarry that i still did not used.. about their differences on each governor, im not really quite sure... but hey..memory problem? hmm...so you mean to say that xperia neo should be enough to play this game? if yes..whats the problem with my phone?! huhuhu... i d have super box to free memory and cache mate forroot caches..hmmm... any way to help me dude?
@taaviu.. bdw, i did a fresh flash of fxp047.. still the same... cannot really play this game... if really memory problem..how to solve dude..any help please.. looks like if i cannot play this game..maybe other HD games .. I cannot play too?
Did you tried another HD games?
Set you cpu 500-1400 and governor ondemand and try then...
Sent from my MT15i using Tapatalk
hmmm...any hard memory game you can test for me dude?
chacho_2me said:
hmmm...any hard memory game you can test for me dude?
Click to expand...
Click to collapse
Im not big fan for games but iv tryed asphalt and nova. They played no problems even with stock.
Sent from my MT15i using Tapatalk
Please click one of the Quick Reply icons in the posts above to activate Quick Reply.
---------- Post added at 03:06 PM ---------- Previous post was at 03:05 PM ----------
ok..hope its about the app problem and not hardware..how about you try this game dude..little bit addicting..just for comparison sake... thanks dude
Hey I was wondering what would be the best Rom for gaming (Most Fps)
I am currently using Cyanogen Mod
Thanks
If you have the Optimus V, the Lewa port found in the android development section is very fast compared to IHO CM7...would probably run games better too I would imagine.
Lukesta9 said:
Hey I was wondering what would be the best Rom for gaming (Most Fps)
I am currently using Cyanogen Mod
Thanks
Click to expand...
Click to collapse
the better rom for gaming is cm7
FILCHIO said:
the better rom for gaming is cm7
Click to expand...
Click to collapse
just curious as to why you say that?
you can try lewa port for P500,2D:456 3D:506
Perfect peso2.2 with original kernel, got on neocore 71.3!!! And on quadrant standard 1350!
For me. I'm using RazrUI right now, but I've heard splendid things about PerfectPeso 2.2. to flash Francos kernel is your choice. It's optimized my system well.
Sent from DeadiKation's Optimus T. -RazrUI-
For gaming better buy a new phone
Can anyone tell me, does data2sd and similar mods improve performance in apps and games or it just boosts your quadrant score...?
Echelonex said:
Can anyone tell me, does data2sd and similar mods improve performance in apps and games or it just boosts your quadrant score...?
Click to expand...
Click to collapse
This **** only for quadrant
_RiVeRsIDe_ said:
This **** only for quadrant
Click to expand...
Click to collapse
Though so...
BTW here is Qudrant and Antutu Benchmark for PerfectPeso2.2
so far i found hybrid rom best for gaming... Gingercrust v.1.5. works smooth if u don bother abt battery life..
http://forum.xda-developers.com/showthread.php?t=1293100
Echelonex said:
Though so...
BTW here is Qudrant and Antutu Benchmark for PerfectPeso2.2
Click to expand...
Click to collapse
The only thing special about those scores is that his kernel has vsync off and he has the egl tweak, all other values are what you expect from the current nightly with ta kernel
i vote for Gingercrust v.1.5 but rom is stop !!!
Perfect peso with new adreno libs is greath for gaming
Inviato dal mio LG-P500 usando Tapatalk
I think the best ROM for gaming is the CM7 because it is smooth and you can use the "Smooth Ass" option on SetCPU. I personally love the option because I can really feel the difference when playing games and scrolling on the home screen.
study lityrem
try N2-CM7 + ta-gb kernel 1.1. I think it's best for games and very good battery life
Looking for stable rom .. somone knows ?
ATM the best rom thet i tried is Nightly foure 4.8, only the compass doesn't work, for the rest perfect
i will find out how to make a rom with finisch pieces, to easy trasnform and have performance, and to know how to fix
tks to ramblaklash for the links !!
update-cm-7.2.0-RC1-p500-signed.zip
Cyanogenmod 7.2 It Works
V6_SuperCharger_for_Android-update8.sh.txt
SUPER CHARGER V6 It Works
camera_port_from N2.zip
CAMERA PORT N2 It Works
BeatsAudiob0314.zip
BEATS AUDIO Having issues
DSPManager (process com.bel.android.dspmanager)
If somone has an idea or know something, pls share his knowledge.
Try SLIMGEN V1.5.2 Very fast and good battery.
Cyanogenmod rc1 official or oxygen
try O2....
Cyanogenmod 7.2.0 RC 1, Supercharged and Overclocked.... Including Sony Xperia Arc launcher ... Stable, Quick and Awesome.... Really loving it
Sent from my LG-P500 using Tapatalk 2
TrollROM not bad
Gtr is the best now
Sent from my LG-P500 using Tapatalk 2
sifonaru said:
Try SLIMGEN V1.5.2 Very fast and good battery.
Click to expand...
Click to collapse
I suggest SlimGen as well, even tho im only on 1.3 i love it, its beautiful!
sifonaru said:
Try SLIMGEN V1.5.2 Very fast and good battery.
Click to expand...
Click to collapse
Battery Life is important.
Il Giulione said:
Cyanogenmod rc1 official or oxygen
Click to expand...
Click to collapse
can't find it ...
watusi said:
try O2....
Click to expand...
Click to collapse
can't find it ...
ramblaklash said:
Cyanogenmod 7.2.0 RC 1, Supercharged and Overclocked.... Including Sony Xperia Arc launcher ... Stable, Quick and Awesome.... Really loving it
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
mmm gtr has already the CM 7.2 rc1.
Marvinera said:
TrollROM not bad
Click to expand...
Click to collapse
TRolololololololoooo ... Trollrom to test seems the same as the others.
acax456 said:
Gtr is the best now
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
i'll try it.
KushHacKinGz said:
I suggest SlimGen as well, even tho im only on 1.3 i love it, its beautiful!
Click to expand...
Click to collapse
to try
so at last
tks !!
i will try first GTR then i will see if it's good enough hehehe
there are only 6 roms to consider ?
SLIMGEN V1.5.2
GTR
TROLLROM
CYANOGENMOD 7.2.0 RC 1
O2
OXYGEN
Question:
Which one of this rom as less bugs ?
Are ALL the components working? (compass, gyroscope, gps, etc..)
How is the battery life?
How it is compering with nightlyfoure 4.8?
Installing GTR now.
Perfect Peso 2.3 in my opinion is pretty good. I'd recommend it for daily use. There are a few bugs that you may run into once or twice, but it's not a big deal really. Doesn't actually affect anything. Plus, performance is great!
miuiandroidfan said:
Perfect Peso 2.3 in my opinion is pretty good. I'd recommend it for daily use. There are a few bugs that you may run into once or twice, but it's not a big deal really. Doesn't actually affect anything. Plus, performance is great!
Click to expand...
Click to collapse
i was using the 2.2, i changed because it had too many bugs. 2.3 mmm i'll try it.
btw about GTR, at first boot it was the same, i changed some settings,
cpu 320-710 to 480-600
ondemand to conservative
not selected to VM48m
not active to compcache 18% (default)
disable boot animation. about boot, there is a boot sound !! it's nice, but annoing. now i need to figure out how to deactivate it the noisy boot sound...
i rebooted
suddenly the settings has changed ... to the ICS interface nice
and the clock is centred ... i don't will it centred ... btw don't care ... it's ok.
to be continue ...
Pantx said:
i was using the 2.2, i changed because it had too many bugs. 2.3 mmm i'll try it.
btw about GTR, at first boot it was the same, i changed some settings,
cpu 320-710 to 480-600
ondemand to conservative
not selected to VM48m
not active to compcache 18% (default)
disable boot animation. about boot, there is a boot sound !! it's nice, but annoing. now i need to figure out how to deactivate it the noisy boot sound...
i rebooted
suddenly the settings has changed ... to the ICS interface nice
and the clock is centred ... i don't will it centred ... btw don't care ... it's ok.
to be continue ...
Click to expand...
Click to collapse
Yeah, test it all out and choose the rom you like best . Also, PP does have ICS settings. Just reboot your phone after the first start up for it to apply. Also, PP has an annoying startup sound. It's freaking loud and might scare you lol. Just delete it at /system/media/android_audio.mp3 if you do test it out. Performance wise.... I think perfect peso beats GTR lol. But I tested 2.0 GTR only, haven't tried V3.1 or 3. yet, so yeah, just try both and stick to the one you like.
ATM, using Kssood's GB MIUI It's awesome lol.... apart from the bugs haha
I'm also looking for a stable ROM,I'll keep my eye on this thread.
btw, I also can't find O2 Rom...
geoair said:
I'm also looking for a stable ROM,I'll keep my eye on this thread.
btw, I also can't find O2 Rom...
Click to expand...
Click to collapse
O2 is oxygen rom
Sent from my LG-P500 using Tapatalk 2
tested GTR
it work fine only with his standard settings, ... it means too much battery drain
+ it has a terrible bug, when you swipe down the bar the whole system has a micro lag, thet stops the music too ...
there are scroll lags... and another fail, compass doesn't work! here too, it was the same with nightly foure 4.8 ... mmm strange btw... can only be the kernel.
I pass GTR, not for me. but nice interface.
i hope that the CM9 is soon ready for an all day use...
i'll try now SlimGen slimgen
I thought you said stable rom? looking for a stable rom? lol all cm7 and cm9 based are full off bugs! go back to stock for stability and hate all it's cap limits for your device.
recreation012 said:
I thought you said stable rom? looking for a stable rom? lol all cm7 and cm9 based are full off bugs! go back to stock for stability and hate all it's cap limits for your device.
Click to expand...
Click to collapse
so you say that ALL ROMs based on CM7 and CM9 are crap ?
and the only stable roms are the 2.3.3 ? the original stokroms ?
Pantx said:
so you say that ALL ROMs based on CM7 and CM9 are crap ?
and the only stable roms are the 2.3.3 ? the original stokroms ?
Click to expand...
Click to collapse
Crap is your word not mine, cm7.2 and cm9 do have bugs, and yes corz.. stock is much much stable, where talking stability here.
recreation012 said:
Crap is your word not mine, cm7.2 and cm9 do have bugs, and yes corz.. stock is much much stable, where talking stability here.
Click to expand...
Click to collapse
ok, then how to make a stable custom rom ? because the stantard are very very ugly and not practik.
Hello all, i have a question, i am using the Phenomenal 3.0 normal version kernel and is using SETCPU apps to manage my CPU speed. However, when i try to set the speed to 1100mhz and above, the CPU speed does not go up to 1100mhz and above, instead it always stay at 1000mhz.
Has anyone experinece this before? if yes, has anyone any steps to resolve this?
Could it be the undervolt issue that is preventing me for going up to 1100mhz?
Thanks.
Looking at the thread it doesn't look like the kernel has overclock capabilities,
slaphead20 said:
Looking at the thread it doesn't look like the kernel has overclock capabilities,
Click to expand...
Click to collapse
I am not trying to overclock, just trying to go to 1400mhz at times but i just cant go past 1000mhz, only when i restart the phone, then it will go to 1400 at times...
seem like i have solve the problem by untick the cpu power saving under the power saving option. However, it seem like the SetCPU apps is useless as i am unable to control the CPU anymore.. is that true? or are there any apps that can overcome this issue?
mrlow81 said:
Hello all, i have a question, i am using the Phenomenal 3.0 normal version kernel and is using SETCPU apps to manage my CPU speed. However, when i try to set the speed to 1100mhz and above, the CPU speed does not go up to 1100mhz and above, instead it always stay at 1000mhz.
Has anyone experinece this before? if yes, has anyone any steps to resolve this?
Could it be the undervolt issue that is preventing me for going up to 1100mhz?
Thanks.
Click to expand...
Click to collapse
Have you tried using other apps, instead of SetCPU, or are you running two CPU-manipulation apps at once?
Try clearing SetCPU's data/cache and try again
I personally use AnTuTu CPU Master, but that is a personal choice, I guess
familyguy59 said:
Have you tried using other apps, instead of SetCPU, or are you running two CPU-manipulation apps at once?
Try clearing SetCPU's data/cache and try again
I personally use AnTuTu CPU Master, but that is a personal choice, I guess
Click to expand...
Click to collapse
I have SETCPU and system tuner pro... does these 2 apps cause the issue that i have?
Phenomenal kernel is a ready to use kernel. You cannot change any settings here in this kernel. It's not like any other kernel wherein gives you the ability to configure the cpu and gpu. Setcpu will only work with other kernels such as SiyahKernel. This will give you the ability to set the cpu and gpu freq and voltage. The power saving mode limits the power of your cpu, thus disabling it will increase cpu freq
Sent from my GT-I9300 using xda app-developers app
BelJanss said:
Phenomenal kernel is a ready to use kernel. You cannot change any settings here in this kernel. It's not like any other kernel wherein gives you the ability to configure the cpu and gpu. Setcpu will only work with other kernels such as SiyahKernel. This will give you the ability to set the cpu and gpu freq and voltage. The power saving mode limits the power of your cpu, thus disabling it will increase cpu freq
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hi, thanks for the info and advise, so can i ask if i revert back to Stock Kernel, i should be able to control my CPU speed?
mrlow81 said:
Hi, thanks for the info and advise, so can i ask if i revert back to Stock Kernel, i should be able to control my CPU speed?
Click to expand...
Click to collapse
No u need a kernel with cpu freq altering capability integrated. Siyah kernel has this I know
Sent from my GT-I9300 using xda app-developers app
I use Tegrak Overclock on stock rooted ROMs. It goes to 1.6Ghz. Works perfectly.
mrlow81 said:
Hi, thanks for the info and advise, so can i ask if i revert back to Stock Kernel, i should be able to control my CPU speed?
Click to expand...
Click to collapse
Nope. Stock kernel will not allow you to change it. If you're on stock ics rom, i would suggest you use siyah kernel v1.5.2. I'm once a user of it. If you need a guide in underclocking and undervolting, you can find the best guide here posted by bala_gamer. You can also settings in his signature which you can use.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 06:40 PM ---------- Previous post was at 06:37 PM ----------
Here's the link
http://forum.xda-developers.com/showthread.php?t=1827635
Sent from my GT-I9300 using xda app-developers app
BelJanss said:
Nope. Stock kernel will not allow you to change it. If you're on stock ics rom, i would suggest you use siyah kernel v1.5.2. I'm once a user of it. If you need a guide in underclocking and undervolting, you can find the best guide here posted by bala_gamer. You can also settings in his signature which you can use.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 06:40 PM ---------- Previous post was at 06:37 PM ----------
Here's the link
http://forum.xda-developers.com/showthread.php?t=1827635
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Read my post above. With Tegrak you can overclock stock rooted ROMs.
Baldilocks said:
Read my post above. With Tegrak you can overclock stock rooted ROMs.
Click to expand...
Click to collapse
Yes sir I know. But I just want to give other options. So that he can choose which is good for him. He can overclock upto 1800mhz in siyah kernel. But afaik, he is more on overclocking with undervolting to have performance and battery life.
Sent from my GT-I9300 using xda app-developers app
Thank you all for your good advise... now i know why i cant set my CPU speed due to kernel.
Will look into trying other kernel if i really like to control my CPU.
Baldilocks said:
Read my post above. With Tegrak you can overclock stock rooted ROMs.
Click to expand...
Click to collapse
Pal, i believe you have tired this apps, is this apps dangerous and diffcult to use?
mrlow81 said:
Pal, i believe you have tired this apps, is this apps dangerous and diffcult to use?
Click to expand...
Click to collapse
Nope. Pretty straightforward and it's been around for a while now. Used it with my Galaxy S II as well.
BelJanss said:
Yes sir I know. But I just want to give other options. So that he can choose which is good for him. He can overclock upto 1800mhz in siyah kernel. But afaik, he is more on overclocking with undervolting to have performance and battery life.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
And you are very right!!!!! Doesnt matter what app you use u cant overclock on stock kernel!!!! Stock kernel doesnt have the provision for that. And if members who send links read those links properly before they send them they will realise that you need a kernel that supports overclocking like siyah!!!!!!!!!!!! Stock kernel doesnt.
art_arev said:
And you are very right!!!!! Doesnt matter what app you use u cant overclock on stock kernel!!!! Stock kernel doesnt have the provision for that. And if members who send links read those links properly before they send them they will realise that you need a kernel that supports overclocking like siyah!!!!!!!!!!!! Stock kernel doesnt.
Click to expand...
Click to collapse
You need to actually go look at the Tegrak app before you start typing....