Related
Hello community!
I own 2 Vibrants, both rooted with no issues. I'm no stranger to flashing through Odin, I've flashed many of the Vibrants in my workplace back to the stock 2.1 (seems to fix most of the issues short of GPS problems, even though it's supposed to be the same), so download mode is nothing new to me.
Recently a few of the people who've come to me with Vibrants have shown how they can't get in to recovery or download mode without using ADB, the hardware keys just don't seem to work for it. I've tried myself and was able to confirm this. We were still able to root them with no issues using one click root. I prefer to manually flash the update.zip myself, but whatever does the job. I've just received a replacement for one of the Vibrants (menu button went out), and noticed I can not get in to recovery/download mode. Naturally I rooted, installed terminal, then rebooted in to download mode, started a flash with Odin.
It hung on cache.rfs. I waited... and waited.. and it mocked me in it's frozen status. So now I'm at the phone+!+computer screen, which I've been at several times on my main Vibrant, but the key's still do not work for download mode. To clarify, I've tried each of the following methods to enter in to download mode, several times. It won't work. I'm in the process of trying different button combination's to see if there is another way to get in. Anyone have any thoughts or suggestions?
Edit: Included working steps so people don't have to search the thread
Provided by rhcp0112345:
Try this.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up AND volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
Originally Posted by stepinmyworld
"have your usb in, press down both the volume up/down toggle and the power button.... hold them until the screen goes black and as soon as it does, let go only the power button and it should appear there again
however, i found out that you need to take out the battery and get into download mode freshly again...."
Hello,
If the above does not work for you.
Can you supply a full dump of the phone? Perhaps I/others can take a look at it.
Thanks!
I have tried that. I have tried almost every combination I can think of. I have tried holding both volume rockers then inserting the battery while plugged in to USB, holding the power through 1 and 2 cycles, I have even tried 3 and 4 cycles as well. I have tried just vol down, just vol up, both with the same results. I have purposefully bricked my main Vibrant to test this out and make sure I wasn't losing my mind. I was able to get in to download mode several ways, none of which work on this new device.
@rhcp0112345 - How do I grab a full dump of the phone? I'll be honest, I've never spent very long in phone+!+computer before tonight. I've never been stuck here long enough to see how to connect via computer. At this moment, plugging the phone into the pc gives me no prompts that something has been plugged in, the phone isn't seen by adb (big shock) or Odin. I'm at a loss myself.
Well,
First thing.
Can you please dump like so:
Code:
adb shell
su
busybox ls -al /dev/block/
Post that here.
Also,
Code:
adb shell
su
dd if="/dev/block/bml0!c" of=/sdcard/bml0.backup
Please 7zip the bml0.backup file and upload it someplace and PM me the info. Dont post it public.
Thanks!
I'll be happy to do that with the next device I have this issue with, but I can't boot the phone, therefore I can't connect via ADB (been trying, if I could do adb, I could just simply 'adb reboot download' to get in to download mode). I'm thinking at this point I will have to exchange the phone, as I can't get past the phone+!+computer screen no matter what I try.
I was running into this problem too. I re-extracted the files and tried again and it worked. I also tried it without loading the .pit into odin, not sure which of two or both did it. Not sure if its the right way, but that did it after hangin on the cache numerous times.
Sent from my SGH-T959 using XDA App
Follow the unbrick method.
You pull the battery and some other stuff.
To get it past that.
I think its volume up? + power?
Yeah, removing the .pit file seems to fix the lock up issue in Odin, but unfortunately, I'm not even getting to the download screen, so I can't get Odin to find the phone. I'm sure once I get to download mode I can get it running, but I'm unable to get download mode on this one device.
Try this.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up AND volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
rhcp0112345 said:
Follow the unbrick method.
You pull the battery and some other stuff.
To get it past that.
I think its volume up? + power?
Click to expand...
Click to collapse
If you mean this solution to fix any brick, I have tried that method, it doesn't work on this new device. I originally used this thread when I was messing with my first Vibrant, and it worked beautifully, but it doesn't work on the new vibrant.
So I've pretty much given up on trying to figure this out. I've tried every method possible, all work on both my non-replacement vibrants, but nothing works on the replacement one. Going to have it replaced again and have a new one ordered out. When that one gets here, I will test download/recovery modes, if I have any issues, I'll pull the dump file and post it here, maybe someone can figure out what's going on. On the back of the device, the IMEI sticker has manufacture dates (year.month), looks like the replacement was a 10.7 just like my original Vibrant, so it's not a manufacturer date type issue, it's got to be something changed in the software side of things. It's almost as though the volume rocker keys do not work for recovery/download mode, I get the exact same thing as if I'm just pressing the power button. When I did get in to recovery (before getting to it's current state), the volume keys worked fine for selection though. I can confirm that there is no new information on tmob's side about how to do a hard reset using the hardware buttons (ie, recovery mode) as of this posting.
Did you try with the phone OFF..
1. Have ODIN running
2. Hold Volume Down + Up
3. Plug in USB (WHILE HOLDING VOLUMES buttons in)
Should go directly into DOWNLOAD mode
I did try that as well. Works beautifully on both my old Vibrants, but not on this new one.
Sent from my SGH-T959 using XDA App
johnny12times said:
I did try that as well. Works beautifully on both my old Vibrants, but not on this new one.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Drats!!! Oh well, time to go back to T-Mobile
johnny12times said:
I did try that as well. Works beautifully on both my old Vibrants, but not on this new one.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
@ Johnny12times: Dude u'r right. I've played around with a few different vibrants and they could all go into "download mode" - but when receiving a replacement unit (within the last 2 days), nothing works to go into download mode. Something has definitely changed - not sure what.
Good luck bro - hope it all works out.
I received my Vibrant last Thursday (8/19). I have never been able to boot into recovery mode using the buttons. Needed to root by using one-click.
Ive also tried every button combo and am still unable to get recovery or download. I received the phone last fri (8/20). Its so frustrating knowing that so many other people can get manual recovery. Im sending it back tomorrow for replacement, but who knows if that one will even work? I hope someone figures out why so many vibrants are unable to do this. Good luck!
Well my new one should be here within the next day or so, as soon as it arrives I'll check it and pull a dump file. I'm not savvy enough to figure out how to fix it, but at least smart enough to put it here for the people that can.
How about this:
1. Remove SD and SIM card
2. Remove battery
3. plug the phone into USB
4. hold down vol-up and vol-down
5. pop the battery back in while holding vol buttons
Hi guys. I'm totally new to the android/smart phone world btw. Anyways, I recently got my Samsung Galaxy S2... first thing I noticed, my touch screen wasn't working. I popped the battery in and out and then it started working as it should.
My phone was working fine this morning, then all of a sudden out of no where, the touch screen stopped working again. I've tried turning on/off the phone multiple times. I've taken out the battery and even my SIM card nothing... i'm worried.
Has this happened to anyone else? Is there a fix? Do i have to go through Samsung? I hope not. Incase anyone asks, I did not root my phone.
Any help/feedback would be appreciated.
When the touchscreen stops working... were you charging the phone at that time?
The first time i turned on my phone, was actually by accident and it was charging.
However, just earlier now, it was not. it was just sitting on my computer desk. The home button, lock button and touch capacitive buttons work.... but i can't get past the lock screen
you could try a factory reset to see if its software related, but it sounds like hardware. I would definitely Return the phone .
I guess I can't do a factory reset, since I can't get into any of the menus... man this sucks. I spent $900 *gulp*
To do a factory reset,
1. Turn the POWER OFF, pull the battery out and put it back again.
2. Simultaneously press and hold the Volume Up, Home and Power button
3. If the Samsung Symbol appears, release the Power button
4. A Boot Menu will then show, Use the volume up/down to choose wipe data/factory reset.
touch screen not needed this way.
oo that's interesting... I tried it. and it didn't get to a boot menu. maybe I was doing it wrong. I tried a few different ways, but no success. It turns out I have warranty with the store. They're going to replace it for me Thanks for the feedback guys. Awesome forums.
Something similar happened to me yesterday. When I had the in-box USB cable attached to a BoxWave VersaCharger (combined AC/DC charger), and the VersaCharger was plugged into 120V AC, the touchscreen would stop working. As soon as I unplugged the USB cable from the SGS2, or plugged the VersaCharger into a 12V DC lighter socket, the touchscreen would work fine.
I've got the same problem as the OP... I had my phone charging overnight and this morning when I first went to use the phone I could not unlock the screen. I could wake the screen via the home button, and see I had a missed call etc but it just wasn't responding to touch. BTW I can't remember if when I first tried to unlock the phone if it was charging or not but really this shouldn't matter.... oh and btw, I'm not rooted or anything either! Naturally I rebooted the phone but still the same problem....so I tried a battery pull and still the same problem. Just now I did a factory reset but the touch screen still isn't working! I guess this is a hardware problem so I'm going to get it fixed under warranty by Samsung! Gutted that I will likely be without my phone for a week or 2!
EDIT, UPDATE...
Well, I was just on my way to the repair shop Samsung warranty had told me to take it too, and I took my sim card out to put in my old Hero (the only thing I hadn't tried!) and I couldn't believe it but the touch screen started working fine again! Weird, but that is now my advice if anyone else has a problem with their touch screen not working - oh and I took the sim out whilst the phone was still turned on. Crisis averted!
UPDATE 2
Sadly this has happened about 4 times to me now and I'm just waiting for the inevitable next time. Each time doing a factory reset then taking the sim card out seems to bring the screen back to life (though last time not immediately) but I shouldn't have to put up with this. Problem is, I don't want to send off a seemingly perfectly working phone to get repaired as I fear they will struggle to notice the problem, never mind fix it! I'm hoping a new firmware comes out soon, in the hope that it may resolve my issues...
Me as well ...
I have had this happen to me twice now (Touchscreen not responding).
The first time I had just installed a game and thought it must have been related to that. Pulled the battery and no joy, left it for a while and it came back to life...
Second time I was surfing the web and it stopped responding, pulled the battery and left it for maybe a minute but no joy .... pulled the battery again and left it for probably 20min and it came back to life. When it came back up I noticed the livewallpaper had been turned off and my widgets were gone from the homescreen.
What I did notice when it wasn't working was it had "safe mode" displayed at the bottom left of the screen
Have the Same Problem
Have the same problem i Mine and was super exicedat first it worked fine and after charging the touchscreen stopped working i pulled the battery out and put it back in but no luckso im gonna return mine to the shop hope they replace it
Moral:AT FIRST SUPER EXICTED BUT NOW SUPER ANGRY
Same issue - Is there ANY way to save my data before I send it in for repair/replace?
Hi all,
As of this morning, I have exactly the same issue as the OP. Screen doesn't react to touch, with the exception of the capacitive buttons. I found a dude on YouTube that had the same issue: youtu.be/0oIdllWiV4I
The last thing I did with the phone before it started misbehaving was to answer a call. The phone was on the charger when the call came in - I can't recall whether I unplugged it before answering, or after, or at all during the call. Not sure it has any relevance anyway, only mention it because I've seen reports of people's screens no longer reacting to touch when the phone is plugged in to a charger (apparently it even states in the manual that this may happen).
Anyway, whilst all my contacts, SMS, photos etc are backed up to the cloud, the same can't be said for my app data. Before I lose hours and hours of progress in various games, or all my settings in numerous other apps, etc, can anyone think of any way to get access to the memory of the phone, bearing in mind the following:
I can't connect to Kies to pull a back-up because bluetooth is currently enabled on the phone and when one connects the USB cable, it says "Activating USB mode will deactivate Bluetooth. Continue?" but I can't click the Yes button
I can't connect in USB mass storage mode because I can't navigate to the settings menu entry to enable it
I can't turn Bluetooth off in order to get Kies working, becuase I can't get to the settings menu or pull down the notification bar to reach the power control.
I can't use Voice input to control the device (on the off chance there was a "bluetooth off" voice command) because (presumably with the most recent firmware I flashed via Kies a few weeks back) for some reason Vlingo is no longer the app on the double-home button action. Instead it calls Samsung Voice and wants to walk me through a first use tutorial, but I can't click the next/skip buttons
I installed via Android Market push the app belonging to www_remoteaccessphone_com as it promises to be able to remotely switch bluetooth off, but the website says I haven't installed the app yet, presumably because alrhough I was able to install it without touching the phone, it probably needs to be run at least once to set it up, and I obviously can't do that
I can't start Kies Air to try and get my data that way (starting it would require using the touch screen)
Kies via bluetooth isn't supported on Android
Needless to say, the data I'm trying to retrieve is on the internal memory, not the SD card. As you can see I've been trying all sorts of creative things, but I'm fairly sure I'm screwed. Any bright ideas I haven't thought of?
blaubeer said:
Hi all,
As of this morning, I have exactly the same issue as the OP. Screen doesn't react to touch, with the exception of the capacitive buttons. I found a dude on YouTube that had the same issue: youtu.be/0oIdllWiV4I
The last thing I did with the phone before it started misbehaving was to answer a call. The phone was on the charger when the call came in - I can't recall whether I unplugged it before answering, or after, or at all during the call. Not sure it has any relevance anyway, only mention it because I've seen reports of people's screens no longer reacting to touch when the phone is plugged in to a charger (apparently it even states in the manual that this may happen).
Anyway, whilst all my contacts, SMS, photos etc are backed up to the cloud, the same can't be said for my app data. Before I lose hours and hours of progress in various games, or all my settings in numerous other apps, etc, can anyone think of any way to get access to the memory of the phone, bearing in mind the following:
I can't connect to Kies to pull a back-up because bluetooth is currently enabled on the phone and when one connects the USB cable, it says "Activating USB mode will deactivate Bluetooth. Continue?" but I can't click the Yes button
I can't connect in USB mass storage mode because I can't navigate to the settings menu entry to enable it
I can't turn Bluetooth off in order to get Kies working, becuase I can't get to the settings menu or pull down the notification bar to reach the power control.
I can't use Voice input to control the device (on the off chance there was a "bluetooth off" voice command) because (presumably with the most recent firmware I flashed via Kies a few weeks back) for some reason Vlingo is no longer the app on the double-home button action. Instead it calls Samsung Voice and wants to walk me through a first use tutorial, but I can't click the next/skip buttons
I installed via Android Market push the app belonging to www_remoteaccessphone_com as it promises to be able to remotely switch bluetooth off, but the website says I haven't installed the app yet, presumably because alrhough I was able to install it without touching the phone, it probably needs to be run at least once to set it up, and I obviously can't do that
I can't start Kies Air to try and get my data that way (starting it would require using the touch screen)
Kies via bluetooth isn't supported on Android
Needless to say, the data I'm trying to retrieve is on the internal memory, not the SD card. As you can see I've been trying all sorts of creative things, but I'm fairly sure I'm screwed. Any bright ideas I haven't thought of?
Click to expand...
Click to collapse
flash it with CF-root, boot into CWM recovery, do a nandroid backup after that, use CWM recovery again to mount USB storage, connect to your PC and pull everything off.
Nitrile said:
flash it with CF-root, boot into CWM recovery, do a nandroid backup after that, use CWM recovery again to mount USB storage, connect to your PC and pull everything off.
Click to expand...
Click to collapse
Thanks for the quick advice. I guess I'll need to use my girlfriend's phone to download CF-root and then transfer the SD card to my device. Quick question before I proceed though - is it possible to remove all traces of such tampering, since I've already made out with Samsung that I'm sending it in for repair, and I'm not sure they will honour the warranty if they see it has been rooted etc.
blaubeer said:
Thanks for the quick advice. I guess I'll need to use my girlfriend's phone to download CF-root and then transfer the SD card to my device. Quick question before I proceed though - is it possible to remove all traces of such tampering, since I've already made out with Samsung that I'm sending it in for repair, and I'm not sure they will honour the warranty if they see it has been rooted etc.
Click to expand...
Click to collapse
get a USB jig off ebay or amazon to reset the flash counter. should not cost more than 5 or 6 euros, shipped.
anyways you need to flash CF-root through ODIN if you are coming from stock. instructions are all in chainfire's cf-root thread.
Nandroid Restore
So I successfully rooted, used CWM to do a Nandroid backup, mounted the sd_card and saved the contents (including the nandroid backup) to my PC, reflashed the stock rom & kernel, usb-jigged it to get the counter back to zero/original and sent the phone in for repair. My efforts paid off as they repaired it without question under warranty. I just received the phone back and today set about restoring my backup:
Copied the sd_card contents I'd saved to my HDD back onto the phone
Re-roooted it with Cf-mod.
Used CWM to restore the backup I took before sending it in
It restored boot/system/data/cache successfully
selected reboot now in CWM
The result is that it is still missing all my apps. It only seems to have the "data" like my camera shots and SMS messages, system settings like whether bluetooth is on or off, the volume level, Wifi networks etc. So something was restored. But there is no Google Account configured, the lock screen picture is the default not the one I had beforehand, and as I said, all the apps - the main reason I did this whole thing as my personal data is all backed up to the cloud on a regular basis anyway - have not been restored. Am I confused? I thought a nandroid backup took a complete snapshot of everything, apps included.
Finding out the list of Apps I had in order to reinstall them is not an issue - I have a list of everything I had installed saved on AppBrain. But if I reinstall the apps, all the settings (or progress in the games) within those freshly installed apps will be back to square one, not where I left them, right? Or should I reinstall the apps and then restore the data partition over the top again?
Are you guys using any type of screen protectors, cause if you are, that may be the issue s their have been reports that the screen becomes unresponsive with certain screen protectors when connected to a charger.
However, if you are not using a screen protector, then I would suggest getting the unit replaced as you should not have to do anything, root or otherwise, to get the touchscreen working on a touchscreen phone
achillies400 said:
Are you guys using any type of screen protectors, cause if you are, that may be the issue s their have been reports that the screen becomes unresponsive with certain screen protectors when connected to a charger.
However, if you are not using a screen protector, then I would suggest getting the unit replaced as you should not have to do anything, root or otherwise, to get the touchscreen working on a touchscreen phone
Click to expand...
Click to collapse
Nope, no screen protector or any kind of case for that matter. Anyway, that isn't my issue anymore. The touch-sensitive unit was defective, the phone was repaired under warranty. My issue now is getting my apps & settings back. I have meanwhile read elsewhere that Nandroid doesn't back up the apps - pretty deceptive "backs up everything!" "it is like time travel" etc comments around here then.
Anyway, I reinstalled all the apps I had previously, and thought by reapplying the data partition from the nandroid backup it might then bring back the settings for the reinstalled apps. Instead all it did was remove all those apps again - now I am really confused. How come the restore DOESN'T bring back the apps I used to have, but DOES remove the ones I subsequently install. Does Nandroid touch the apps or doesn't it?
Touch screen not working
So i am having a very peculiar problem related to the GT-I9100 Touch Screen.
I bought the phone from Saudi Arabia and I live in Bangladesh at the moment. So for now I don't have warranty.
I bought it on 4th of this month. It had 2.3.3. So I updated it to 2.3.5. I did not use the phone much before that so I don't know if this problem was there before.
So here is the problem.
First time I noticed it when i pulled the phone from my pocket and could not unlock the pattern. First I thought I forgot the pattern. After sometime I noticed that i could not touch the buttons. I was dragging my finger over the points but there was no connecting line. I restarted the set. But it still did not work. After sometime I took the battery out. And after that it started normally and unlocked. And the touchscreen is totally fine.
I tested it using *#0*#. And every single point in the screen registers touch.
After that this happened couple of times. First couple of days I thought it was a pattern unlock problem. But i tried PIN and Password even using no unlock. It happened in every case.
So after couple of days it totally stopped happening.
But from yesterday it is happening again. And today it happened 3 times.
So today as I had no unlock protocol i tried tapping Home twice. As this brings on the voice command menu. And for the first time i was in the phone without touching the screen.And first i noticed the Menu and Back Soft keys works.And the touchscreen still does not work. And i noticed some thing weird. Always some thing in the screen is Selected. In Menu the + Icon is selected. In first screen the Map icon is selected. Also in Recent Apps the first App is selected. So after a lot of reboots it is back to normal again. Now i see something interesting. In the Battery Usage Graph i can see some really sharp drops. 3 times. Looks like when this happens phones charge takes a nose dive.
So here is the Gist.
Info related the Problem:
1. Usually happens when the phone is my pant pocket for sometime. It does not happen if it is sitting on the table.
2. Touchscreen gets totally disabled.
3. I have no idea why this happens.The exact reason behind it.
4. Battery Charge takes a nose dive when this happens. See the attached images.
5. I still don't know how to bring it back. Sometimes a simple reboot works. Sometimes I have to pull the battery. And sometimes it works on its own.
6. Every other function of the phone works. Like music playback using my UE 200vi music keys using PowerAMP, Siri(Android version), Call can be received using headset.
Battery nose Dive:
dl.dropbox.com/u/30943431/SC20111115-203017.png
dl.dropbox.com/u/30943431/SC20111116-202913.png
Also the selection
dl.dropbox.com/u/30943431/SC20111116-202146.png
So this is the thing. My biggest problem right now is, I don't know why it happens and I don't know how to bring it back from this situation. If I knew I could make sure I don't get it again or I would just fix it every-time. As when this happens I cant make calls or anything which requires the touchscreen.
So guys help me if you can by giving ideas. As i will not go back to KSA in 6 months. So buying a $550 phone unlocked was a total waste. As i cant use it here.
Thanks a million in advance.
---------- Post added at 09:29 PM ---------- Previous post was at 09:13 PM ----------
Sorry for this. But looks like i cant post outside links before i have 8 posts. So i removed the "ht tp : //" part of the links. Copy paste in browser address bar and it will open fine.
And also the next time it happens i will do a video to shou you guys.
Having the same problem while charging touch screen doesn't work
Stock charger and usb cable
i was on CM7 but that happend so i flashed stock but no luck
I will write more observations
I've done a quick search of this forum and [ALARMINGLY] can't find a solution (or any references) to a continualy cycling reboot on my daughter's day-old Sony Tablet S.
What's happening is, the system boots, I see the unlock screen for a few seonds and then it reboots again!! No time to do anything.
The power button (in combination with either of the volume buttons) doesn't do anything when the boot animation is being displayed. And the reset button (in the tiny hole) simply turns the tablet off, but the cycling reboots start again when powered back on.
Just so you know, I have owned and used the Morotola Xoom since August 2011, so do have some experience with Android Honeycomb, but nothing like this. Oh, and I have not attempted to root either machine.
Here's what I believe is the cause: I was copying a file off a network share (using a third party file manager), but it was VERY slow. The transfer mustn't've finished when I turned the tablet off (completely) for the night.
Therefore, I assume it is trying to resume the transfer, but there is a problem (possibly the WiFi connection is slow to connect). Nevertheless, I would have thought Andorid was more robust than to simply reboot... an error message would be a bit more "professional" and much more welcome than a cycling reboot that does not allow me to do a F%^&$#G thing about it!!
PLEASE HELP or point me to a forum that may be able to.
Thanks in advance.
Wow. That tablet is toast. Something must have been corrupted when you turned it off.
My girlfriend had an HTC Sensation 4G that had similar problems the day she bought it. HTC and our cell provider gave us the run around denying responsibility. We rooted it and flashed a new ROM which completely fixed it though. In your case for the Tablet S this solution is impossible as the tablet hasn't been rooted yet.
Return it to the store asap and tell them it's not working properly!
Have you tried the reset button on the side underneath the volume button. Just stick a pin in thhere and hopefully voila.
Let us know if that works.
Sent from my Sony Tablet S using Tapatalk
Cycling reboot - FIXED!
mightyfo said:
Have you tried the reset button on the side underneath the volume button. Just stick a pin in thhere and hopefully voila.
Click to expand...
Click to collapse
motoscoddie said:
And the reset button (in the tiny hole) simply turns the tablet off, but the cycling reboots start again when powered back on.
Click to expand...
Click to collapse
Yeah, mightyfo, I did. Thanks for your reply, though.
Anyway, I have attempted a few more "fixes". Among them was to delete the partial/currupted files from the SD card, without result. Then, for some reason, I turned off my WiFi access point, and, bugger me, the tablet booted! I turned the WiFi back on to be certain it was responsible for the problem and, yes, the reboot cycling started again.
Obviously, I turned off the WAP again, booted the tablet and killed the saved connection. Once I turned the WAP back on, I re-established the connection and the tablet has behaved ever since!
Just so you know, I did have the latest System update (v3.2.x) when all this was going on...
Makes me wonder if it is an Andorid issue, or something Sony have done while tinkering with Andorid. I just hope my findings can help someone else in the future.
Sounds like you need to do a system reboot.
Comprehensive explanation of the problem
Please take a look at the following very thorough explanation of the underlying cause of the reboot problem:
[Can't post links] Search for "android stops renewing lease" in Google and select the Princeton link (should be top of list).
My fix was to turn off the WiFi AP (to stop the reboots), delete ("forget") the connection and then set a static IP outside my DHCP range.
Hope this helps someone else...
Not sure If this should be here or not. I've tried my best to search for anything similar.
I have a Sony Ericsson Neo V MT11I and I unlocked it using a program, with my USB Cable.
The unlock cost me £13 and it worked fine. I checked the phone, and It was making calls and working fine.
A few hours later, it was off, so I put in the charger and nothing. No screen or activity. The green light next to the power button comes on and If I connect it to my computer, the computer detects it, then doesn't. (I hear the new device done every minute or so). When it detects then detects its unconnected the green light flashes once.)
It was working fine after I unlocked it, but this seems to of happened hours after I unlocked it.
Thanks for any help!
Hm, sounds to me like your phone entered some sort of bootloop, it can't even go to that image which you see when you charge phone(turned off).
Maybe that's why it founds it, then it disappear, and then it founds it again, and so on.
Can you please try 2 things.
1)hold back key and connect cable to phone (of course, other side is in PC)
2)hold menu key(that's the right one, some people confuse it with home key ) and connect cable(of course, other side is in PC)
Report what happens then. To be more safe, can you please re-insert battery between 1 and 2 (and also before 1) )
Hi Buddy,
While pressing the Menu key, and connecting it, the light remains off, until I release the button. Now I've done this, there is no sound on the computer. Even If I connect it normally without pressing any key.
Thanks,
You didn't answered on my entire question.
Plus, how did you unlocked it? And by unlock, you mean SIM unlock(able to use any SIM card)?
I did that and until I let go of the menu key the light didn't come on, now it lights up upon plugin, but I hear no activity on my computer.
I used wotanserver . com/en/sony-ericsson to sim unlock it, and sorry If I was not clear!
Thanks again.
back key, back key, you didn't answer me on that part
anw, try flashing it with wotan.
Sorry for the late reply. I flashed it, and it's now working fine. I would like to thank you for your help, I'd buy you a pint If I could.
I installed the NFC Ring Unlock application from McLear on the EZ2 tablet, which seemed to function well with my NFC ring.
I did one thing differently, because I don't like to give my Google master password to a 3-party app , I used an app password specifically for the NFC ring, which I considered to be one-time and didn't write it down
Then I had to fly and put the device in flight mode and powered it off some time later.
Now I get the NFC Ring Unlock screen in flight mode when I power up the device, but I can't get the unlock screen to work (NFC is also switched off in flight mode, didn't realise that and the Google authentication is also not working) and I can't get out of flight mode!
What I tried already:
Resetting the device by voulume-up/power, red button in SD-card and PC-companion connection.
Trying to hit the "normal" unlock screen which appears for a sub-second period.
Contact McLear, but they are flooded at the moment, because of the roll-out of their new products.
But neither of this works because they all depend on unlocking the device first.
Any advice?
If your device is unlocked and you have USB debugging enabled, you should be able to deinstall the App with ADB (Adcvanced Debug Bridge).
I guess that with the locked original Sony Bootloader, this doesn't work, though.
You could do a remote wipe with play device management:
https://www.google.com/android/devicemanager?hl=da&u=0
If Sony's software detect it when you connect it to computer, you might also have some options there. I am using Mac and only see repair device ,under the Xperia menu, as a potential solution.
Hey Svan, damn it sucks you are getting stuck by this! Sorry!
1. Did you try posting on the NFC Ring forum?
RE "3-party app" our app never stores your details, we use the Google provided Google Auth libraries to handle the authentication process. I can personally guarantee and promise at no point do we store or use your username/pass, we just get a success/failure callback from them and act accordingly.
2. Is it possible you can use your Google Auth or is your work-around preventing you from doing this?
We're actually just beta testing an updated version of the app that forces users to enter a pin code to handle circumstances such as this. Flight mode and two-form factor auth have been an issue for us so we're taking pro-active steps to address it ASAP This doesn't help you though ;(
3. As BabelHuber asked, do you have debug mode available? If so a simple adb uninstall of the app will get you moving again.
Sorry about the delay through support, I just took another team member on today to help with the backlog, he starts tomorrow so hopefully things will move faster!
Source: I'm the inventor of the NFC Ring
Found a solution
I had a the exact same problem, and luckily I found a solution just in the moment I had already decided to factory reset.
I have the stock rom/bootloader/etc installed, no root.
Well anyway, factory resetting the phone is not an easy task either, so this is what I did to get to the factory reset option in the boot loader:
I pressed power for a loooong time, then the phone shutdown, I pressed power and vol-down for a looong time.
Some kind of boot menu appeared, I chose recovery.
At first I was stuck with a red triangle with an "!" over a lieing android. I found that pressing and holding power for 1 second then, while still pressing power, pressing "vol up" for 1 second and releasing both at once, presented me a special menu, wich contains the factory reset and option ... and also a mysterious "wipe cache" option, which sparked an idea of how I might circumvent the factory reset...
I remebered, that after the last OTA update the phone was so busy after reboot, that the NFC Unlock app was loaded after a long delay, while I was already able to interact with the phone.
So I though what the heck, before factory resetting the device I might as will try wiping that damn cache and see wether that caused the delay.
After wiping the cache, I booted and Android went through all those apps, and then showed the launcher/home screen without the widgets loaded etc, for just long enough to switch off the airplane mode, before the unlock app was loaded and immediately locked the screen again.
It might have helped that I disabled the SIM Card PIN check, i don't know.
Only this time I could unlock it normally :silly:
I hope this helps