Hi
I have a problem with a HTC Touch HD, i bought in ebay.
It had a broken LCD screen , I have changed it and now it works.
Now the problem is that ,when I have opened it to change LCD ,i saw that there wasn't the Wifi / BT coaxial cable.
I can't find a replace part in ebay and ,generally, in Internet.
Have you some ideas about where I can find this cable?
Thank you
giorgiocol78 said:
Hi
I have a problem with a HTC Touch HD, i bought in ebay.
It had a broken LCD screen , I have changed it and now it works.
Now the problem is that ,when I have opened it to change LCD ,i saw that there wasn't the Wifi / BT coaxial cable.
I can't find a replace part in ebay and ,generally, in Internet.
Have you some ideas about where I can find this cable?
Thank you
Click to expand...
Click to collapse
try your look at http://www.htcrepairparts.com/htc-touch-hd-c-129_220.html?language=en
and at http://www.globaldirectparts.com/HTC-Replacement-Repair-Antenna-s/5700.htm
Related
hi
i have a htc touch plus or as they call it htc touch dual.digitizer issue it stoped responding so i bought new one fitted in and still the same problem .i think is a software problem i guess driver software for touch screen .if any one can help please
thanks
Touch Dual digitizer
Hi Saliml2
Not convinced it is a software issue. My digitizer on T-Mobile Touch Plus did the same thing. It stated behaving erratically and then stopped responding altogether. I replaced the digitizer (via eBay) and it work for a few days and then stopped again.
I have read around the internet and have tried several ROM updates etc (currently running a WM 6.5.5 found in other area of this forum) but this has not solved the problem.
It seem to be an alignment issue - i.e. screen alignment is outside the screen area, but there seems to be no way of getting it back. Could be a fault on the phone mainboard (?) but there doesn't seem to be any info around apart from sending it to HTC for repair (not viable as the phone value negates this)
My phone is still not working, I might try opening it up again and reseating the digitizer cable but have done this twice already.
Have you try change the flex cable?
I had one to, with the same problem, and after changing the flex everything was ok...
Good luck!
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
deepthought2471 said:
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe this is helpfull http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/
Goodluck
Flex cable, i was mean the cable between the mainboard and the lcd block, you can see it in the previous link, picture 20. Have you try it to change?
hello guys how did you manage to put the digitizer cable in place mine doesn t seem to get in place do i need something to hold the connector in place???
My 101 came with a defective LCD cable.... so me being me I popped it open and managed to get the screen working.... within a matter of a couple days it was right back to how it was.... upon re opening I realized the LCD ribbon cable was making VERY poor connection just before the LCD screen connection. I have looked for a few days now to locate a cable to no avail.... If anyone could help me out,.. or sell me a working cable that would be awesome!
ribbon
hi there i now this a long time ago but did you find the ribbon for your archos 101 as i need the same cable
regards dav
i have a galaxy tab 10.1 that was having screen problems i found out that it was the lcd flex cable if i wiggle it the screen comes on. So its defiantly that cable and not the hardware my problem is i cant find a replacement anywhere just everything else beside the lcd cable i need!
any help will be greatly appreciated.
there's 3 cables i see on the galaxy tab 10.1 the charging port the digitizer and the lcd
lost896 said:
i have a galaxy tab 10.1 that was having screen problems i found out that it was the lcd flex cable if i wiggle it the screen comes on. So its defiantly that cable and not the hardware my problem is i cant find a replacement anywhere just everything else beside the lcd cable i need!
any help will be greatly appreciated.
there's 3 cables i see on the galaxy tab 10.1 the charging port the digitizer and the lcd
Click to expand...
Click to collapse
Same situation here.
Any luck?
It seems like we found a defect right? three people with the same issue between ten days or so ...
two month ago i have replaced the charging port flex, really annoying....
martocapo said:
Same situation here.
Any luck?
It seems like we found a defect right? three people with the same issue between ten days or so ...
Click to expand...
Click to collapse
Could be a defect.
The cable it self instead on being straight is bent 90 degrees to go up and im assuming the crease finally snapped in the cable
Guys,
Check the follwing thread Link .
I am following up the same issue there.
Regards
martocapo said:
Guys,
Check the follwing thread Link .
I am following up the same issue there.
Regards
Click to expand...
Click to collapse
i have the same problem what should i do? replace the lcd flex cable? also mine is overheating too? does that has to be with the flex to ?
Hello guys,
Is there any way to test an i9300 board without a LCD screen?
I have one here but I don't have any working LCD (the one I have is totally wasted).
I wish to know if it is still working so I can buy the screen+digitalizer kit to fix it.
Any ideas?
EDIT
Haha, I just realized to put it in a USB port of my computer. It lit up the front lights (from the menu/back) and my PC found it.
This thread could be deleted.
Hi, I have a Galaxy S2. I've dropped it and screen stopped working. ( Digitizer & LCD ). I would like to use the phone to a tv screen.
Example: Connect the S2 to a TV screen and use it with a Mouse/Keyboard.
Could somebody tell me if this is possible and what method "cables" are needed.
Thanks !
Emanuel Barb said:
Hi, I have a Galaxy S2. I've dropped it and screen stopped working. ( Digitizer & LCD ). I would like to use the phone to a tv screen.
Example: Connect the S2 to a TV screen and use it with a Mouse/Keyboard.
Could somebody tell me if this is possible and what method "cables" are needed.
Thanks !
Click to expand...
Click to collapse
You will need the HDMI cable if Connecting phone to TV screen,but I am not sure is it possible that you screen is not working.
Screen Replacement Question
Hi, my plan was this:
postimg.org/image/5l53sut73/full/
I have all the cables, except the "Micro USB Splitter" which I cannot find anywhere.
Thanks