[Guide] Hard Reset wp7 ROM - TG01 Windows Phone 7 Development

shut down your phone, then hold VOL + & VOL - and press power on button.
you u will see some options on screen with black background.
press vol- to move untill youu see "cold boot?" and (warm) press Vol +.to
change it to (cold) press vol - to the menue end.
phone will reboot and reset your files to factory stand

I used that to improve signal stringht on Nokser primary ROM. It worked but not so good

Damn miro, it's called HARD RESET not soft, soft is just normal reboot

aeroflyluby said:
Damn miro, it's called HARD RESET not soft, soft is just normal reboot
Click to expand...
Click to collapse
ok RESET your phone- the same function as in the settings/about ...

Related

How to a hard reset on thc s740?

hi
my htc s740 is dead...
How to a hard reset with the keyboard?
when I press power button the ppc it blocks at written "windows mobile 6.1", if I attend some minute, it exits to me outside a shielded white screen whit this word: "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings.
if I press SEND key it does not succeed nothing
while off, press and hold vol down and center nav key, then power button.
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
great!!is ok! thanks.....
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
hey m8!
Thanks for the solution. i had hardtime doing it thou!!! if you encounter problems. press and hold vol down and center nav key BUT when it comes to power; just dot it. anyway maybe it's just me who did the stupid thing of holding power (well it works for the diamond so i thought...)
anyway thanks goes to ombre33
HTS Rose
R.0.24.30.24
G.12.23.30.06W
D.1.14.00.00
Peace
V
Does not work for me...
My Rose Keyb is not responding, I changed something in the registry and now I can no longer use both Keyb, I remove the battery, try the hard reset button stuff does not work, any ideas ?
sorry edit
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
thnx! it works!
Strange.
Very strange! After doing the procedures, the rose ask to do the reboot and stop in logo of HTC. I had never happened me in any pda.
Now what i do?
You have to wait about 4-5 minutes then Rose will reboot again and will install the additional software.
1. From the Home screen, press the Start button.
2. Press More
3. Select Accessories
4. Select Clear Storage
5. You will be prompted to enter a code, enter 1234
I had the same probleem, my HTC S740 freezes after reboot with the HTC logo screen. I tried the follwoing and it worked:
- press and hold vol down and the navigation key
- pres and release directly the power botton
- a messege will apear, press the navigation key.
- the device will reset to factory settings
- a messege appear asking to press vol up to restart
- device will restart and begin reinstalling the software, reboot after then.
May i ask what are the applications (that came installed with the phone) that are gone with the hard resetting ?
Thanks
HTC s740 backup before reset
hi...i would like to know if there is anything one can do to back the information up before resetting the Phone as i have crucial Data i cant affort to loose. PLS HELP!?
There are few backup softwares which can backup almost everything on your phone, and you can easily recover it after hard reset. I personally use Sprite Backup, which is probably the best one.

Hard resetting?

there is nothing in the wiki or anywhere that explains how to hard reset (unles i just missed it somewhere)
Not sure if they apply to the CDMA but here are the ones from the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners
I use a variation of those on my GSM RAPH, try #1 to see if it works for your CDMA RAPH:
1) Hard Reset
- Turn off
- Press & hold Action
- Press & hold Volume Down
- Turn on
- Wait for TriColor Bootloader and release buttons
- Follow onscreen instructions
2) Bootloader for Flashing new NBH
- Turn off
- Press & hold Volume Down
- Turn on
- Wait for TriColor Bootloader and release button
- Start ROM Flash utility on PC. If flashing a RAPHIMG.NBH on SDCard, flash begins automatically.
HTH,
For my sprint tp, I've found the easiest way is with the device turned off, I press the vol. down then the center of dpad while holding both then press the on/off button holding all three untill the onscreen instructions appear.
this thing will NOT hard reset, its about to go HARD against the wall LOL
I get a window that says
"warning"
power will be turned off,
and you may lose data if
you have not saved them.
Do you want to continue?
if i hit yes it just rebbots, and obviously if i hit no it does nothing
just cleared storage and will try after to hard reset.
NOPE still not working, im holding the vol down and the enter key then pressing the power button on top and holding all three down and i still get the same message.
even tried it with vol down/dpad/power and noada zip zilch zero
Tregrad said:
this thing will NOT hard reset, its about to go HARD against the wall LOL
I get a window that says
"warning"
power will be turned off,
and you may lose data if
you have not saved them.
Do you want to continue?
if i hit yes it just rebbots, and obviously if i hit no it does nothing
just cleared storage and will try after to hard reset.
NOPE still not working, im holding the vol down and the enter key then pressing the power button on top and holding all three down and i still get the same message.
even tried it with vol down/dpad/power and noada zip zilch zero
Click to expand...
Click to collapse
Do you happen to have a Verizon Touch Pro, if so the only way to Hard Reset is to do Clear Storage under Settings, System.

[Q] How to hard reset(clean boot) for ACER E110? Help me please! Thank you!

I try like this! but I can't...
Acer Liquid E hard reset
Turn off your phone, then press and hold the Power until you feel your smartphone vibrate and/or you see the Acer logo screen. Press and hold the Volume up and Volume down buttons. Use the Volume up button to select Clean boot:YES. Press the camera button to confirm.
Help me please!
Thank you very much!
I test this with a E110 but not working.
When you hold vol up and the left send key together and power up phone and hold volup and send key you see the Android system recovery utility.
Now you can select reboot system,apply sdcard:update.zip and wipe data/factory reset.
Press and hold camera botton and power on your handset
Howto reset acer e110
HOWTO:
1.turn off
2.press left button + volume up (hold down)
3.press power button
.......and wait.......
4.select reset and wipe
5.reboot
Finish.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
any guide to flash this model my phone is stuck in boot mode only ..
i found my solution
gsmgoeroe26 said:
I test this with a E110 but not working.
When you hold vol up and the left send key together and power up phone and hold volup and send key you see the Android system recovery utility.
Now you can select reboot system,apply sdcard:update.zip and wipe data/factory reset.
Click to expand...
Click to collapse
thank u so much i used this and now my acer unlocked yahoo,:good: this is working dear :good:
Use a some codes to Hard reset
1:- *2767*3855#
2:- *#*#7780#*#*
100% done by wipe data
lizz said:
HOWTO:
1.turn off
2.press left button + volume up (hold down)
3.press power button
.......and wait.......
4.select reset and wipe
5.reboot
Finish.
Click to expand...
Click to collapse
thanxxxxxxxxxxxxxxxx bro its 100% working for me...
my set is ok now from stuck on logo problem.

i need help please

Just got a 2nd hand legend, I cleared the data (hard reset?) without a storage card in it.
now stuck in GERMAN. I have tried to hard reset by useing volume buttons and power key but this does not appear to work!
sara7 said:
Just got a 2nd hand legend, I cleared the data (hard reset?) without a storage card in it.
now stuck in GERMAN. I have tried to hard reset by useing volume buttons and power key but this does not appear to work!
Click to expand...
Click to collapse
How to go in Recovery, Fastboot mode and Bootloader mode.
=====================================================================
1) Bootloader Mode:
While your devices is powerd off, press "Power" + "Vol. Down"
until Bootloader screen appears.
-----------------------------------------------------------------------------
1.5) How to use buttons in Bootloader,Recovery and Fastboot mode:
"Volume Up" : go to previous item
"Volume Down": go to next item
"Power" : to select item
-----------------------------------------------------------------------------
2) Fastboot Mode
While in bootloader mode,
press power button and you are in fastboot mode
-----------------------------------------------------------------------------
3) Recovery Mode
While in bootloader mode, press "Vol. Down" and after
press "Power" button and after that you are in a screen
with a phone and an alert press "Vol. Up" + "Power" to go in recovery
sara7 said:
Just got a 2nd hand legend, I cleared the data (hard reset?) without a storage card in it.
now stuck in GERMAN. I have tried to hard reset by useing volume buttons and power key but this does not appear to work!
Click to expand...
Click to collapse
Remove and then reinsert the battery.

please help to hard reset sharp aquos s2

hello,
i forgot my pattern. and i dont see where to recovery it .
i always use Fingers to unlock my phone
please help.
Here is instruction , but you will lose all data .
http://www.hardreset.info/devices/sharp/sharp-aquos-crystal-2/hardreset/first-method/
Teddy Lo said:
Here is instruction , but you will lose all data .
http://www.hardreset.info/devices/sharp/sharp-aquos-crystal-2/hardreset/first-method/
Click to expand...
Click to collapse
does not work on my aquos s2, not crystal 2. thanks anyway
This is for your device what I found on the Russian site .
1. First turn off the device
2. For a few seconds, hold down the Volume (+) + Turn on
3. When we see the Android image or the Sharp logo on the display, we stop clicking on the buttons
4. Press the Enable button to enter Recovery
5. In the menu, select wipe data / factory reset using the Volume Control buttons and confirm by pressing the Power key . 6. Then in the menu, select Yes - delete all user data by pressing the Volume Control keys and confirm the selection by pressing the Power key 7.
Teddy Lo said:
This is for your device what I found on the Russian site .
1. First turn off the device
2. For a few seconds, hold down the Volume (+) + Turn on
3. When we see the Android image or the Sharp logo on the display, we stop clicking on the buttons
4. Press the Enable button to enter Recovery
5. In the menu, select wipe data / factory reset using the Volume Control buttons and confirm by pressing the Power key . 6. Then in the menu, select Yes - delete all user data by pressing the Volume Control keys and confirm the selection by pressing the Power key 7.
Click to expand...
Click to collapse
you are right when my phone connect to my Pc
Thanks alot.
I have the same problem but can not doing the hard reset like the way you show here
It turned on the phone again after i press any button when seeing the logo, even trying to connect to pc
Please show me the other way
Thank you so much
UyenNguyen said:
I have the same problem but can not doing the hard reset like the way you show here
It turned on the phone again after i press any button when seeing the logo, even trying to connect to pc
Please show me the other way
Thank you so much
Click to expand...
Click to collapse
press both volume + and power button. ultil android logo appear

Categories

Resources