This is a Custom CWM-Based Recovery 5.0.2.7 for HTC FlyerCredits and special thanks to Koush and everyone else involved in Cyanogenmod project!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
for more screenshots check attachments
[ info ]
This Recovery will reside on the /recovery partition of the device and will give you lots more features than any existing recoveries for this device...
[ credits / special thanks ]
Koush - for the brilliant work & coding on CWM recovery
Team Revolutionary - for the initial CWM4 recovery... i have used the recovery.fstab and HTC charger from their recovery-ramdisk
Napstar - my teammate (Team UtterChaos) for his work on implementing touch based interface
sztupy - for his work on SteamMOD recovery (the core touch interface is based on his work)
[ Requirements ]
S-OFF device
HoneyComb version
WiFi Flyer only????
CWM4 Recovery (by Team Revolutionary)
[ features ]
now featuring Touch based navigation interface!
features derived from CWM5
ability to backup & restore to/from internal SDCARD
ability to flash custom update.zip from internal SDCARD
faster .TAR backups (backups created using this new recovery MAY NOT BE COMPATIBLE with older CWM4)
my additions
changes to graphics (ported some graphics from CWM5.5 ICS edition)
revamped layout for recovery menu (to improve navigation) [renamed few options and changed their order]
changed "wipe data/factory reset" option to just "factory reset", and detailed the partitions which will be wiped
added reboot options
reboot into system
reboot into recovery
reboot into fastboot mode
some modification in "Partition SDCard" section:
put up a confirmation to warn the user that this option will wipe sdcard
added ability to select filesystem when creating new layout
add confirmation to "backup" option in Nandroid menu... it used to keep getting pressed by mistake and start making backups immediately... now it will ask u before starting backup
removed tons of "NO"s from some menus...
[ WARNING ]
THIS RECOVERY IS STILL IN TESTING... MAKE SURE THAT U HAVE UR COMPLETE DATA BACKED-UP (INCLUDING SDCARD DATA)...
and incase this doest work correctly make sure that u can restore to factory condition...
"Partition SDCard" option in CWM5 WILL WIPE UR EXTERNAL SDCARD!!!
I have only tested it to work on my WIFI Flyer... please check if it works for the 3G version... if 3G version uses a different partition table THEN DO NOT USE IT ON 3G VERSION!
[ how to install this recovery ]
download the recovery package (its an update.zip)
place the downloaded package on external SDCARD
reboot into recovery and flash this package
thats it! new recovery will now be installed
[ how to get back to Team Revolutionary's CWM4 Recovery ]
download the Team Revolutionary's CWM4 Recovery package (its an update.zip)
place the downloaded package on external SDCARD
reboot into recovery and flash this package
thats it! old recovery will now be installed
[ donations ]
if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc
PAYPAL DONATION LINK
[ download links ]
[FLYER][HC] CWM-Based Touch Edition Recovery 5.0.2.7 by DooMLoRD (v02)
MD5HASH: c05da93ec4744eaffcc6f440691c8790
[Flyer][GB] CWM-Based Touch Edition Recovery 5.0.2.7 by DooMLoRD (v02)
MD5HASH: 91bf21aa8ddb4fc8504b8103942c957f
[FLYER] CWM-Based Recovery 5.0.2.7 by DooMLoRD (v01) < OLD NON-TOUCH >
MD5HASH: 68470906ea654d6c9cff88930d5e7480
Team Revolutionary's CWM4 Recovery
KINDLY DO NOT MIRROR MY FILES
please do intensive testing and let me know!
enjoy!!!
reserved for later
i need people to test this recovery out and give me feedback asap.. because i am working on a TouchEdition recovery which will be based on this...
so do let me know how this works out!
DooMLoRD, can you confirm that you have off-mode charging working properly? Having a recovery that doesn't is not a good situation to get into in a device with no removable battery.
globatron said:
DooMLoRD, can you confirm that you have off-mode charging working properly? Having a recovery that doesn't is not a good situation to get into in a device with no removable battery.
Click to expand...
Click to collapse
the necessary files for that are already in place...
may be someone can help test that...
additionally: is the partition layout on GB different? and waht abt the 3G version?
Reserved for me at the moment
Will give it a try and post here + stuff from other posts
Thanks a lot... Great idea
Sent from my HTC Flyer P510e using xda premium
EDIT:
OK just chose to install your zip in CWM - successful
Phone is rebooting... to android, not back to recovery - booting since 5 minutes
(no bootloop - HTC quietly brilliant logo visible)
EDIT2:
pressed power - powered down (vibrated once) booting again
Coolexe´s rom with your kernel just successfully started
will reboot soon to bootloeader check your stuff
EDIT3:
got into your recovery... old backups still there
Rebooted from recovery to Androd without problems now
just the first boot after installing your recovery was a hangup solved by pressing power button untill manual reboot
ALL OK
HTC Flyr 32GB 3G
globatron said:
DooMLoRD, can you confirm that you have off-mode charging working properly? Having a recovery that doesn't is not a good situation to get into in a device with no removable battery.
Click to expand...
Click to collapse
i think its charging:
i just need the recovery.img from GB (wifi/3g) & HC (3g) versions to add support for them...
I have a 3G Flyer running HC; how might one find the partition layout information you need?
Dunno if this is any help:
Code:
# mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
/dev/block/mmcblk0p25 /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p29 /data ext4 rw,nosuid,nodev,noatime,barrier=1,nodelalloc,data=ordered 0 0
/dev/block/mmcblk0p30 /cache ext4 rw,nosuid,nodev,noatime,barrier=1,nodelalloc,data=ordered 0 0
/dev/block/mmcblk0p31 /devlog ext4 rw,nosuid,nodev,noatime,barrier=1,nodelalloc,data=ordered 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/data/d /data/d debugfs rw,relatime 0 0
htcfs /data/htcfs fuse.htcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
DxDrmServerIpc /data/DxDrm/fuse fuse.DxDrmServerIpc rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
/dev/block/vold/179:33 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0202,dmask=0202,
allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:33 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0202,dmask=
0202,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
/dev/block/vold/179:65 /mnt/sdcard/ext_sd vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmas
k=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/dm-0 /mnt/asec/com.robotinvader.knightmare-2 vfat ro,dirsync,nosuid,nodev,relatime,uid=1000,fmask=0222,dmask=
0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/dm-1 /mnt/asec/mainwood.android.rushhourfree-1 vfat ro,dirsync,nosuid,nodev,relatime,uid=1000,fmask=0222,dmas
k=0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
fdisk -l shows exactly nothing; /proc/mtd is empty. :S
DooMLoRD said:
the necessary files for that are already in place...
may be someone can help test that...
additionally: is the partition layout on GB different? and waht abt the 3G version?
Click to expand...
Click to collapse
On the GB (2.23.405), 3G device it didn`t start, i got a white screen.
---------- Post added at 07:46 PM ---------- Previous post was at 07:42 PM ----------
DooMLoRD said:
i think its charging:
i just need the recovery.img from GB (wifi/3g) & HC (3g) versions to add support for them...
Click to expand...
Click to collapse
Here is the recovery that works with GB (http://www.multiupload.com/0X989UZK3J )
porcupineadvocate said:
I have a 3G Flyer running HC; how might one find the partition layout information you need?
Click to expand...
Click to collapse
i need the recovery.img which works for ur device...
mohamed_moscow said:
On the GB (2.23.405), 3G device it didn`t start, i got a white screen.
---------- Post added at 07:46 PM ---------- Previous post was at 07:42 PM ----------
Here is the recovery that works with GB (http://www.multiupload.com/0X989UZK3J )
Click to expand...
Click to collapse
the version u quoted is for 3G GB version of flyer right?
DooMLoRD said:
i need the recovery.img which works for ur device...
the version u quoted is for 3G GB version of flyer right?
Click to expand...
Click to collapse
yes. that is for GB 3G/Wifi version.
mohamed_moscow said:
yes. that is for GB 3G/Wifi version.
Click to expand...
Click to collapse
so there is a common recovery for 3g/wifi versions in GB?
yes, i think so.
DooMLoRD said:
so there is a common recovery for 3g/wifi versions in GB?
Click to expand...
Click to collapse
Yes, layout is the same, sizes may differ, but that doesn't matter so log as the partitions reside at the same device path.
---------- Post added at 07:59 PM ---------- Previous post was at 07:57 PM ----------
additionally: is the partition layout on GB different? and waht abt the 3G version?
Click to expand...
Click to collapse
The partitions are the same layout but the kernel offsets are different, you'll need a GB kernel for GB and HC for HC.
ok so from what i see, comparing the 3G-GB with WIFI-HC versions of CWM4 recovery from Team Revolutionary, is that the ramdisk (recovery.fstab i.e. partition table info) is the same on both these versions...
so i think..
3G/WIFI versions use same partition table
to have GB/HC versions i just need corresponding zImage
can someone confirm this?
if the above is true then the version i have posted in 1st post (HC-WIFI version) will work on HC-3G too...
DooMLoRD said:
i think its charging:
i just need the recovery.img from GB (wifi/3g) & HC (3g) versions to add support for them...
Click to expand...
Click to collapse
Sorry, I wasn't very clear on what I said earlier. I meant off-mode charging. Device powered off and charger plugged in. The recovery is used to handle this charging mode. The use case which is of particular concern is what happens if the battery goes completely flat. I'd suggest the test is to be charged about 50% power off and plug into wall charger for 30 minutes or so and then check the charge level. I can't test it myself right now because I'm working on other things on my flyer.
globatron said:
Yes, layout is the same, sizes may differ, but that doesn't matter so log as the partitions reside at the same device path.
---------- Post added at 07:59 PM ---------- Previous post was at 07:57 PM ----------
The partitions are the same layout but the kernel offsets are different, you'll need a GB kernel for GB and HC for HC.
Click to expand...
Click to collapse
oh ok...
i use the offset: 0x14400000 for the HC recovery/kernel
whats the offset for GB?
globatron said:
Sorry, I wasn't very clear on what I said earlier. I meant off-mode charging. device powered off and charger plugged in. The recovery is used to handle this charging mode.
Click to expand...
Click to collapse
that isnt directly related to recovery...
that should be taken care by bootloader or main kernel...
ALL OK
Flyer 32GB 3G Honeycomb
more details in post 6 -LINK
DooMLoRD said:
oh ok...
i use the offset: 0x14400000 for the HC recovery/kernel
whats the offset for GB?
Click to expand...
Click to collapse
0x4400000 ( same without the 1 )
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
DooMLoRD said:
that isnt directly related to recovery...
that should be taken care by bootloader or main kernel...
Click to expand...
Click to collapse
Nope, it's recovery on HTC devices, we had loads of problems with pyramid and a few others when revolutionary was first released.
globatron said:
0x4400000 ( same without the 1 )
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
Nope, it's recovery on HTC devices, we had loads of problems with pyramid and a few others when revolutionary was first released.
Click to expand...
Click to collapse
okay i will post test GB kernel with new recovery
and if its related to recovery then its already working... please verify it urself when u get time
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is created for developers and developing of UrukDroid ONLY.
UrukDroid is alternative Android distribution, based on original Archos OS for Archos GEN8 tablets.
Please do not write here questions about installing UrukDroid on tablet - you can do it in default post - here.
All post violating above rule will be deleted.
This thread is created for:
manage people and dividing work
plan new releases
plan new features
help between developers
gain knowledge, materials
feature proposals by users
Things we are currently working on:
Sauron: memory I/O tuning
cheefy: backup script
Sauron: upgrade/install scripts
chulri: dvb support
What informations are we looking for:
How to prevent Android from going sleep on system level?
Format of bootlogo and initlogo.rle on Gen8 (we are aware of rgb2565 converter etc., but with no luck on Archos yet - I've tried different bit settings 4/8/16/24 and resolutions 200x480, 800x480 - Sauron)
Repository for binary and source releases is currently available here.
Links to other materials that can be usefull in future
Things to do
check ADB over USB problem - and fix
give a better look at mounting disk from Archos over USB (does not work)
prepare and maintain FAQ
check how we can use QUI/QUID (can be checked rescue initramfs) to write messages on boot time
dalvik cheap/stack tuning - memory tuning
backport And. 2.3/3.0 features
Proposed new features by users
dvb-t support (http://forum.xda-developers.com/showthread.php?t=871391)
For future use...
For future use...
Developers
Hey, I would like to help, I have an A70, PM back with something I could do, Im not an android expert but I have some linux and development knowledge, and I'm willing to learn and help as muchs as I can.
Thanks!
Well after reading up on some more Motorola ROMs it seems they modified the dalvik heap size.
Did some quick googling on that, turns out other ROMs do it too, perhaps we could play around with it as well.
The maximum events per second for the windowmanager should help with smoother scrolling ~ also something the motorola ROMs adopted.
Source: http://forum.xda-developers.com/showthread.php?t=815595
as posted on the original Uruk thread
Perhaps the camera can be hacked up a bit as well ~ although I haven't looked into any of this as I'm to busy at the moment !
As for extra tools, tcpdump and vim instead of vi might be helpful for some.
Removing the Telephony.apk and Phone.apk by default in Uruk would be an easy performance addition, Nook users can vouch for an increase in battery life. People have also started mentioning the lack of a
I've had questions on IPv6 support for Google Goggles too although I don't know if this is worth it.
Also could you post the exact location on those bootlogo files so more people can look into it^^.
I won't be as active now as I have exams coming up though I'll do whatever I can to help.
Hi Guys,
I'm not a developer by any means and am just learning Linux, and about the Android frameworks. I'll gladly help in any way possible, but for now I can only research and post what I find for you to look at. That being said, here are a few sources for changing heap sizes in the build.prop.
General Dalvik heap discussion - http://groups.google.com/group/android-platform/browse_thread/thread/ef329096b0dcca94?pli=1
More details from Cyanogen (I found this most helpful and is probably most relevant to what you guys are doing) - http://ryanolson.wordpress.com/2010...ory-per-vm-heap-can-effect-your-rom-cyanogen/
Increasing helps window transitions but takes away RAM - http://www.droidforums.net/forum/droid-hacks/105712-change-dalvik-heap-size.html
3G USB dongles support
I'm planing to start trying to make Huawei 3G dongles work in a next couple of days. Have some expirience with them on linux, along with some expirience in administering linux machines. I'll post results as soon I have some.
xnatex21 or escoriaa - anyone of You (or both ) is willing to create and maintain FAQ (if it's not you could like - no problem - it should be fun ).
Tzbob - how can we merge changes of your OC version kernel? I can probably do it if you don't have time - but you should provide me source + .config file.
I don't get "Also could you post the exact location on those bootlogo files so more people can look into it^^." - you mean source of the image I use, or source of materials how to create Android Logo?
Apps: I'll add tcpdump and vim - no problem, and remove telephony stuff (I wonder why Archos put them anyway). I've added in 0.4 Google Apps (market etc.).
Speed: I'm now playing not with memory managers, IO managers and task managers (kernel stuff).
I do not like especially Java (it's like appendix (Vermiform appendix) to me - everyone have it, but why... ) - so as I wrote in my thread - someone should check current dalvik settings and try to change them (It's mostly in /init.rc script - so changing should be easy).
DVB-T: that's what I looked, it's quite enough to compile in modules (what I've already done) but requires some settings, I'll probably try to play with it when my USB OTG cable will arrive - but if someone is willing play with it earlier
And one more thing - is there any UI/GFX tool on Android that allows to build configuration interface (reads some GUI/menu definitions, and sets some text file/database switches) - we can do it on browser, but I'm not sure if it's best way.
I wanted also to ask you - does the installation procedure should be easier - or it's easy enough? I can make it a bit simpler, and try to work on some scripting. The easiest way would be to make images (I already have them) - that can be installed on SD card in one step, but it would make installation to be a fresh Archos (no copied app from /data) - how to you think?
As I posted in the original thread, i should be able to help with the backup script, unfortunately just on a bash basis.
The configuration UI could be integrated in the standard config menu of android as they do in the cm mod. as mentioned above i don't speak any java but i can find the apk which is responsible.
The copying of the data to data.new could be automated after first boot by putting a startup script, which does that and erases itself after finishing. how do you think about that?
How about integrating the smartass governor of nadlabak? i might ask him about changes to make and chance to get it running.
I think i will try to integrate some gingerbread features like keyboard,themes and if possible launcher to my urukdroid. but it is up to you if you want to integrate that generally... (edit keyboard works already fine)
i'm very willing to help here!
as mentioned i'm kind of a linux pro digging into android for some weeks now
I'd like to help where possible
I've listed in second post, things that need to be addressed by someone. So feel free to choose one (or more ).
cheefy: do you have any idea how to do this backups? I know it can be done by tar - but it seams a bit lame. It will allow to get back in time - but perhaps we can use some linux tools or even some rsync stuff to do it incrementally.
nenadr: those 3d dongles will require some some ppp stuff - this what's inside Android already is enought, or I should add some wvdial or something (I guess I can add some serial USB modems to - be default in kernel).
$aur0n said:
dvb-t support (http://forum.xda-developers.com/show...ighlight=dvb-t)
Click to expand...
Click to collapse
broken link
dvb-t support -> http://forum.xda-developers.com/showthread.php?t=871391
I've cut/past from user proposal so ... - changed.
Anyway - want take care of it?
I can compile all/some dvb modules by default (i've seen you've made some backporting of newer mods). I can also help porting some C programs from Linux side - can't help with java - I'm kind of allergic to it
for the backup things: tar itself has an update option for incremental archives. i will check the speed these days. do you have something like a script yet?
for backporting 2.3 stuff: i have a working GB-Keyboard here, the Launcher is working too, but it has just a 4by4 Grid and so the Archos-Widgets including the energy-widget dont work. I was not able yet to modify it to a 5by5 grid.
@$aur0n maybe it's best to wait until I've done at least v0.6 or even v0.7 (see Roadmap) before integrating it into urukdroid.
I'll develop the dvb thing with regard to the simple tmpfs-root-trick of dogmaphobia because it's way easier to install and test but this should be compatible with urukdroid.
and I'm definitly the man to talk to with regard to the dvb-t project
of course you can build modules for urukdroid, but I think the standard modules I've built should be compatible.
you can find the linux.config and the kernel patches for mc44s803 driver in my svn repository: archos-gen8-dvb/trunk/sources
more backporting patches will follow.
also prebuilt modules and firmwares can be found there:
- archos-gen8-dvb/trunk/package/mod
- archos-gen8-dvb/trunk/package/fw
cheefy said:
for the backup things: tar itself has an update option for incremental archives. i will check the speed these days. do you have something like a script yet?
Click to expand...
Click to collapse
Nope - i haven't created any backup script yet - just I've been using tar.
for backporting 2.3 stuff: i have a working GB-Keyboard here, the Launcher is working too, but it has just a 4by4 Grid and so the Archos-Widgets including the energy-widget dont work. I was not able yet to modify it to a 5by5 grid.
Click to expand...
Click to collapse
Keyboard is working - I don't know if there is need to put it be default since it's in market for free.
And we have plenty better launchers (Zeam, Pro and xda) - i'm not sure if it's needed.
$aur0n said:
nenadr: those 3d dongles will require some some ppp stuff - this what's inside Android already is enought, or I should add some wvdial or something (I guess I can add some serial USB modems to - be default in kernel).
Click to expand...
Click to collapse
@$aur0n: I still didn't managed to find time to play with 3G modems, but from what I know ppp that is already in, should be sufficient; usbserial.ko seems to be there also, wvdial would be nice but it is not essential, but what is crucial for most 3G USB dongles to work is "usbmodeswitch" package, since most of USB 3G dongles are presented to system as usb composite devices, usualy with one CD cdrive (from image on dongle), one mmc card reader on dongle, and several usb-serial channels. When one plugs such device on linux without usbmodeswitch, it gets detected as mass storage device only, and with usbmodeswitch package it gets redetected again as one or more usbserial devices.
Anyway I hope I'll have more time during the end of the week (and weekend), to dig deeper into the issue.
Here is the link to the archos gen8 buildroot git:
http://gitorious.org/archos-buildroots/gen8
There is also some information and the source-files of the boot-splash-screen:
http://gitorious.org/archos-buildroots/gen8/trees/master/initramfs
and the information how it's displayed:
Code:
# Show a nice boot image
104
case "$PRODUCT_NAME" in
105
A28)
106
BOOT_IMAGE=$BOOT_IMAGE_BASE-240x320
107
;;
...
gunzip -c $BOOT_IMAGE > /dev/fb0
# Enabling LCD
enable_backlight
so the bootimage is gunzipped and then directly pushed to the framebuffer.
hope this helps!
(maybe the easiest solution to create a own splash screen would be displaying a animation and capture in the meantime the framebuffer?)
Oh the gb_launcher is pretty snappy and fast, but i understand that. THe keyboard from the market did not work for me so i had to paste some stuff form my milestone to make it working.
but now back to the real things. can you give me a short explanation how to compile a kernel module? ive never done that and i want to try the interactive governor which is said to be much more responsive and quite intelligent, as it does not check the cpu load, but the workqueue.
greetz
Hi,
I'll try to help you make 70HT Urukable !
Used linux from years and have some dev knowledge.
Here is HT's df -h and mount :
Code:
$ export PATH=/data/local/bin:$PATH
$df -h
Filesystem Size Used Available Use% Mounted on
/dev/mmcblk0p2 118.2M 81.3M 30.8M 72% /mnt/system
/dev/loop0 75.5M 75.5M 0 100% /
tmpfs 119.4M 0 119.4M 0% /dev
tmpfs 119.4M 0 119.4M 0% /mnt/asec
tmpfs 119.4M 36.0k 119.4M 0% /tmp
/dev/block/mmcblk0p1 31.8M 8.9M 22.8M 28% /mnt/rawfs
/dev/block/mmcblk0p2 118.2M 81.3M 30.8M 72% /mnt/system
/dev/block/mmcblk0p3 29.6M 3.2M 24.8M 11% /cache
/dev/block/mmcblk0p4 1.6G 144.4M 1.4G 9% /data
tmpfs 119.4M 4.0k 119.4M 0% /dev/shm
/dev/block/vold/8:1 232.8G 95.9G 136.9G 41% /mnt/storage
df: /mnt/secure/asec: Permission denied
$ mount
rootfs on / type rootfs (rw)
/dev/mmcblk0p2 on /mnt/system type ext3 (rw,noexec,noatime,errors=continue,data=ordered)
/dev/loop0 on / type squashfs (ro,noatime)
tmpfs on /dev type tmpfs (rw,mode=755)
devpts on /dev/pts type devpts (rw,mode=600)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on /proc/bus/usb type usbfs (rw,devuid=1000,busuid=1000,listuid=1000)
debugfs on /sys/kernel/debug type debugfs (rw)
tmpfs on /mnt/asec type tmpfs (rw,mode=755,gid=1000)
tmpfs on /tmp type tmpfs (rw)
/dev/block/mmcblk0p1 on /mnt/rawfs type rawfs (rw)
/dev/block/mmcblk0p2 on /mnt/system type ext3 (rw,nosuid,noexec,noatime,errors=continue,data=ordered)
/dev/block/mmcblk0p3 on /cache type ext3 (rw,nosuid,noexec,noatime,errors=continue,data=ordered)
/dev/block/mmcblk0p4 on /data type ext3 (rw,nosuid,noatime,errors=continue,data=ordered)
none on /dev/cpuctl type cgroup (rw,cpu)
tmpfs on /dev/shm type tmpfs (rw)
/dev/block/vold/8:1 on /mnt/storage type vfat (rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1015,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,utf8,errors=remount-ro)
/dev/block/vold/8:1 on /mnt/secure/asec type vfat (rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1015,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,utf8,errors=remount-ro)
tmpfs on /mnt/storage/.android_secure type tmpfs (ro,size=0k,mode=000)
fusesmb on /mnt/storage/network/smb type fuse (rw,nosuid,nodev,user_id=0,group_id=0,allow_other,max_read=32768)
djmount on /mnt/storage/network/upnp type fuse (ro,nosuid,nodev,user_id=0,group_id=0,allow_other)
$
I am ready to resize the main partition on the hdd and add two another partitions for root and data but what size do you recommend? 1Gb and 2Gb ?
Hi all,
Here is a new beta version of the flashtool that, this time, I hope it will fix the Optimize(JIT) feature bricking phones in 0.2.6 versions
It should install the 0.1 release of xRecovery for E10 too.
FlashTool 0.2.7.1 (beta)
beta.zip to apply to the 0.2.7.1 version : better device detection
beta2.zip to apply to the 0.2.7.1 version : improved again device detection
I don't own a mini or mini pro so I couldn't test it
If some want to give me feedback, it would be great.
I hope this 0.2.7.1 will be the last before release
Thanks to all testers
bricked it on a fresh installation of 211a06, root didnt work either. did soc root and tried optimize and when it rebootet it got stuck on SE picture
PressEsc said:
bricked it on a fresh installation of 211a06, root didnt work either. did soc root and tried optimize and when it rebootet it got stuck on SE picture
Click to expand...
Click to collapse
jit v2 is optimized to arm7 phones.
x10 mini and x10 mini pro are arm v6, so you should optimize arm v7 phones with JIT v2, and arm v6 with JIT v1.
thats why phone freezes on SE logo.
bitmovel said:
jit v2 is optimized to arm7 phones.
x10 mini and x10 mini pro are arm v6, so you should optimize arm v7 phones with JIT v2, and arm v6 with JIT v1.
thats why phone freezes on SE logo.
Click to expand...
Click to collapse
But the creator of the program is working to make it for every x10 in family.
It was a test and dont work, pityfuly.
The only thing I think will be ever be useable for the mini/pro (besides flashing firmware) is the Root option as this is basically the same for X10 and e10/u20.
But trying to install the X10 version of JIT and xrecovery on the E10 or U20 is never going to work. (you will need an option to install mini/pro versions in a popup) or another button.. "Optimise mini/pro" (now its getting complicated and messy)
Remember the rule.. Keep it simple (keeping in line with the original Flashtool the main thing is that flashtool can flash firmware, decrypting is nice too.. and root is useful, everything else is too device dependant and there is other software out there to do it simply already) I for one would love a lite version.
I have so much software that does so many things but nothing really well because people want to try to do too much. Keep it simple!
Thanks to you and Bin4ry for a great "Flashing" tool.
Kiwi
kiwiBratwurst said:
But trying to install the X10 version of JIT and xrecovery on the E10 or U20 is never going to work. (you will need an option to install mini/pro versions in a popup) or another button.. "Optimise mini/pro" (now its getting complicated and messy)
Kiwi
Click to expand...
Click to collapse
Kiwi,
Xrecovery already works for all xperia family(minis, pros, x8 and x10).
Its unified version from Zidzu in Big xperia foruns.
A simple solution fot Jit thing just need a submenu that the user can tell witch phone is their.
I tried to get the latest version of xrecovery working on my mini and it caused crash and bootloop (version 3) did you get this "unified Version" working on a mini or pro? If so let me know how you managed it.
Cheers
Kiwi
Sent from my E10i using XDA App
kiwiBratwurst said:
I tried to get the latest version of xrecovery working on my mini and it caused crash and bootloop (version 3) did you get this "unified Version" working on a mini or pro? If so let me know how you managed it.
Cheers
Kiwi
Sent from my E10i using XDA App
Click to expand...
Click to collapse
xrecovery won't work on my x10 mini, when booting into recovery mode the telephone just reboots and shows the sony ericsson startup screen again.
I don't know which tool all of you guys use but the things i tried won't work at all.
kiwiBratwurst said:
I tried to get the latest version of xrecovery working on my mini and it caused crash and bootloop (version 3) did you get this "unified Version" working on a mini or pro? If so let me know how you managed it.
Cheers
Kiwi
Sent from my E10i using XDA App
Click to expand...
Click to collapse
Sorry kiwi,
I was mistaken.
Big x10 xrecovery0.3 dont work for x10 mini.
pedrocel85 said:
Sorry kiwi,
I was mistaken.
Big x10 xrecovery0.3 dont work for x10 mini.
Click to expand...
Click to collapse
It happens to the best of us.
Kiwi
Can someone do an adb shell mount command and post the result ?
the chargemon script differs from X10 to X10 mini/pro and I would like to unify it for all x10/mini/pro/X8 devices
the adb shell mount command will print all mounted FS (mtdblocks and mount points)
Androxyde said:
Can someone do an adb shell mount command and post the result ?
the chargemon script differs from X10 to X10 mini/pro and I would like to unify it for all x10/mini/pro/X8 devices
the adb shell mount command will print all mounted FS (mtdblocks and mount points)
Click to expand...
Click to collapse
Here ya go
Code:
C:\x10mini\tools>adb shell mount
* daemon not running. starting it now *
* daemon started successfully *
rootfs / rootfs ro 0 0
tmpfs /dev tmpfs rw,mode=755 0 0
devpts /dev/pts devpts rw,mode=600 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
tmpfs /sqlite_stmt_journals tmpfs rw,size=4096k 0 0
/dev/block/mtdblock0 /system yaffs2 ro 0 0
/dev/block/mtdblock3 /data yaffs2 rw,nosuid,nodev 0 0
/dev/block/mtdblock1 /cache yaffs2 rw,nosuid,nodev 0 0
DxDrmServerIpc /data/DxDrm/fuse fuse.DxDrmServerIpc rw,nosuid,nodev,user_id=0,gr
oup_id=0,allow_other 0 0
/dev/block//vold/179:2 /data/sdext2 ext2 rw,errors=continue 0 0
/dev/block//vold/179:1 /sdcard vfat rw,dirsync,nosuid,nodev,noexec,uid=1000,gid=
1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,s
hortname=mixed,utf8,errors=remount-ro 0 0
C:\x10mini\tools>adb shell mount
(I have a Fat32 main partition with an EXT2 partition for link2SD)
Hope that helps
Kiwi
Thank you very much
Another thing about xRecovery :
the charemon script replaces an existing binary that usually do the offline charging.
On X10, this binary has been renamed to charger and is called inside the chargemon script (so that this feature is not lost).
Could I have the chargemon binary from X10 mini ? (the original one before it is replaced by the chargemon script) ?
Thanks in advance.
Here we go dude, its the binary file from .24 firmware (just delete the .zip extension.. I had to give it an extension to post on here)
View attachment chargemon.zip
Good luck
Kiwi
report
Root worked properly on u20i 2.1.1.A.0.6 mini pro , installed xRecovey , rebooted into recovery mode , (remote recovery controls are not working)
I was nervous about optimization so I didn't try that 1 , maybe next time
tks for your job
i m new to try rooting..can u plz guide me through he steps. i have update my mini pro to 2.1-211A06.
ROM is discontinued for VIEW, use YNC's latest update
DextersJB
i would test it out but i gotta charge my view its been dusty since i got my N7 lol
Thank you!
first.. thank you for trying to save VIEW.. there is no much going on here. but if you can save our dying VIEW, even slight attempt is greatly appreciated.
I will test this. I am kind of new on tablet but I will test and report back to you. here we go..:good:
Dexter_nlb said:
i would like to see if i can utilize the JB on View.
for this i have changed the kernel and partitions(removed those i do not know atm).
and uploading my test image for someone to test. Download it here MD5 06096eea121b5ec534830fcf97072fc4
HC hboot is required here, GB boot is not supported.
please if someone can help and test it, it will be great.
REMEMBER to factory reset, before installing this rom
I would also like to see a "mount" output run in as shell. so i know what partitions are different, besides /system i know for now.
Click to expand...
Click to collapse
myowin said:
first.. thank you for trying to save VIEW.. there is no much going on here. but if you can save our dying VIEW, even slight attempt is greatly appreciated.
I will test this. I am kind of new on tablet but I will test and report back to you. here we go..:good:
Click to expand...
Click to collapse
it if dos not boot at first try (showing a X after 20-30 seconds)..
maybe change the /system/build.prop in the zip.
replace everything you see in th build.prop with "flyer" with "express" .
save it and copy it back into the zip and replace the original one.
in the /system/lib/hw , rename files you see with "flyer" in the name, replace that with "express" too. ie lights.express.so
flash it once more and see if it helps.
Pulled, will try in about an hour when she charges back up. Apparently I left my wifi on..seems to drain a little more in ICS.
Will report back
Dexter_nlb said:
I would also like to see a "mount" output run in as shell. so i know what partitions are different, besides /system i know for now.
Click to expand...
Click to collapse
Code:
# mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
/dev/block/mmcblk0p26 /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p30 /data ext4 rw,nosuid,nodev,noatime,barrier=1,nodelalloc,data=ordered 0 0
/dev/block/mmcblk0p31 /cache ext4 rw,nosuid,nodev,noatime,barrier=1,nodelalloc,data=ordered 0 0
/dev/block/mmcblk0p34 /devlog ext4 rw,nosuid,nodev,noatime,barrier=1,nodelalloc,data=ordered 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/data/d /data/d debugfs rw,relatime 0 0
/dev/block/vold/179:65 /mnt/sdcard2 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:36 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:36 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
and during installation:
Code:
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : FlyerJB-view
ROM Version : 1.0
ROM Author : dexter_nlb
Device : view/express-3g
Start at : Fri Jul 27 16:36:10 2012
script aborted: file_getprop: failed to stat "/tmp/aroma-data/wipe.prop": No such file or directory
file_getprop: failed to stat "/tmp/aroma-data/wipe.prop": No such file or directory
Installer Error (Status 7)
End at : Fri Jul 27 16:36:10 2012
install finished, rebooted, stuck on white HTC bootscreen.
adb detects the device
Code:
$ ./adb devices
List of devices attached
HT16THY00941 device
but can't connect
Code:
$ ./adb shell
- exec '/system/bin/sh' failed: No such file or directory (2) -
thanks,
just what i needed here.
Sounds cool. From what I have read we will lose Flash if we go to JB. Is this correct?
Stopping support for Flash by Adobe now in favor of HTML5 is sort of like closing all gas stations in favor of electric. Great idea, terrible timing. HTML5 is nowhere near ubiquitous.
** Ring up yncconsulting. I'm sure he would want to help on this.
boastt said:
and during installation:
Code:
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : FlyerJB-view
ROM Version : 1.0
ROM Author : dexter_nlb
Device : view/express-3g
Start at : Fri Jul 27 16:36:10 2012
script aborted: file_getprop: failed to stat "/tmp/aroma-data/wipe.prop": No such file or directory
file_getprop: failed to stat "/tmp/aroma-data/wipe.prop": No such file or directory
Installer Error (Status 7)
[/QUOTE]
can you replace META-INF\com\google\android\updater-script
in the zip you downloaded first with the updater-script in the zip attached to this post and try again.
the reboot is because it probably only wiped, but not unpacked anything to the partition.
Click to expand...
Click to collapse
Dexter_nlb said:
can you replace META-INF\com\google\android\updater-script
in the zip you downloaded first with the updater-script in the zip attached to this post and try again.
the reboot is because it probably only wiped, but not unpacked anything to the partition.
Click to expand...
Click to collapse
Done. Install went smooth. Theres a long delay waiting for a sim card, then the "Insert SIM card" shows up with a "skip" button.
Overall, it seems pretty solid for what it should be.
Compared to your thread for the flyer: mic doesn't work, GPS seems to not even exist on the device, using that UMS doesn' work, if scrolling in chrome is part of the 2d hardware acceleration then it feels slow
boastt said:
Done. Install went smooth. Theres a long delay waiting for a sim card, then the "Insert SIM card" shows up with a "skip" button.
Overall, it seems pretty solid for what it should be.
Compared to your thread for the flyer: mic doesn't work, GPS seems to not even exist on the device, using that UMS doesn' work, if scrolling in chrome is part of the 2d hardware acceleration then it feels slow
Click to expand...
Click to collapse
thanks for the confirmation, no matter if its good or bad.
i believe its possible to make a generic edition and let the installer detect which parts belong to which hardware.
ill look into that.
the hardware issues, probably relate to the files /system/lib/hw where light/sensor/gps is for the flyer and probably differ from the view edition.
for the mic part, i believe those files are for flyer, which needs to be view specific as well.
anyways, thanks, its good to know it can be made working on view as well.
quick search on google, shows that Chrome is not as fast as stock browser, which might be was regular chrome users experience? JB is new and not all apps are adapted? maybe thats why this keeps coming back as being a problem, but might not be a build problem, but Chrome being less compatible.
mitchellvii said:
Sounds cool. From what I have read we will lose Flash if we go to JB. Is this correct?
Stopping support for Flash by Adobe now in favor of HTML5 is sort of like closing all gas stations in favor of electric. Great idea, terrible timing. HTML5 is nowhere near ubiquitous.
** Ring up yncconsulting. I'm sure he would want to help on this.
Click to expand...
Click to collapse
You can still use flash. You just cannot download it from the market but the ICS version works just fine.
In what ways is JB significantly better than ICS or GB in order to sacrifice some functionality to run it in your opinion? Not snarking here - I really would like to know.
In my personal experience, GB on this tablet is just fine. It can be overclocked and everything works, but of course I'd love the latest and the greatest if there is some noticeable performance pop.
"Not snarking here" - ehum.
mitchellvii said:
In what ways is JB significantly better than ICS or GB in order to sacrifice some functionality to run it in your opinion? Not snarking here - I really would like to know.
In my personal experience, GB on this tablet is just fine. It can be overclocked and everything works, but of course I'd love the latest and the greatest if there is some noticeable performance pop.
Click to expand...
Click to collapse
its all just a challenge and development tests/teasers.. for some it can easily be a daily driver, for others too much is definately not working.
I do not have it for the pen, so thats no priority personally.
but media playback for me, can be important, for now i just switch to SD when im on youtube.
but generally, there is alot of difference in the drivers and how framework and JB differs, i do not want to repeat , but it is for better, if just we can make more work better.
JB/ICS is alot better experience especially comparing our less good HC adaption.
JB kills GB. i'm running JB on my nexus and it's SO quick!
thanks for your hard work here, i hope we can get something running! we sort of have an ICS rom, but JB is what ICS should have been from the start..i'm pumped!
Yeah HC was pretty lame. Its really too bad the way HTC just completely abandoned what was an expensive device at the time.
I have a pen but really don't use it much anymore anyway. 7 inch tablet is just a little too small to comfortably write on anyway. I guess for me fast internet browsing and solid Netflix are the most important things.
Sent from my SPH-D710 using Tapatalk 2
Great work. I'm interested in testing once I can flash in a normal fashion (not sure how to switch out the zip file etc.)
Sent from my PG41200 using xda app-developers app
Thanks for the development of JB on the view, been thinking of trying to port some of the roms from the flyer lately. I'm not much of a developer so the fresh thread here is greatly appreciated.
Sent from my PG86100 using xda app-developers app
Runs great so far! A few minor issues but won't take much to iron out.
I bought this tablet in Greece named Turbo X Hive IV, a brand from Plaisio Store! A very nice tablet but I cant find any proper information about rooting it besides a thread about the previous model. I managed to install Gmail and Google Play, as it only had slideme under the name "plaisio market".
The technical information are the following
Turbo X Hive IV, 10.1", 1280 x 800 pixels, IPS panel, Front camera 0.3 mp, back camera 5mp, android 4.2.2, CPU QuadCore-A31 Series at 1.2 GH, Internal storage 16GB, Ram - 1GB, Wifi, Bluetooth, Mini HDMI, Micro USB 2.0 Micro usb 2.0 host , microSD card slot, Li-Ion 6000 mah
Model M10A9
Firmware 3.2_2013704
Kernel 3.3.0 [email protected] #4
My Questions:
1. I dont know if the device is rooted, I want some guidance how to check it.
2. Another thing I want to know is why cant I find anywhere how to set different user accounts (not different gmail accounts under the same user account). Is it locked or hidden ?
3. Is there any other Cyanogenmod or other custom rom that works with this tablet ?
If anyone wants pictures of the tablet I ll upload some.
Thanks,
astonakis said:
I bought this tablet in Greece named Turbo X Hive IV, a brand from Plaisio Store! A very nice tablet but I cant find any proper information about rooting it besides a thread about the previous model. I managed to install Gmail and Google Play, as it only had slideme under the name "plaisio market".
The technical information are the following
Turbo X Hive IV, 10.1", 1280 x 800 pixels, IPS panel, Front camera 0.3 mp, back camera 5mp, android 4.2.2, CPU QuadCore-A31 Series at 1.2 GH, Internal storage 16GB, Ram - 1GB, Wifi, Bluetooth, Mini HDMI, Micro USB 2.0 Micro usb 2.0 host , microSD card slot, Li-Ion 6000 mah
Model M10A9
Firmware 3.2_2013704
Kernel 3.3.0 [email protected] #4
My Questions:
1. I dont know if the device is rooted, I want some guidance how to check it.
2. Another thing I want to know is why cant I find anywhere how to set different user accounts (not different gmail accounts under the same user account). Is it locked or hidden ?
3. Is there any other Cyanogenmod or other custom rom that works with this tablet ?
If anyone wants pictures of the tablet I ll upload some.
Thanks,
Click to expand...
Click to collapse
Do you have binary file Su or Superuser.apk installed? If not is not rooted!!!!
Mr.Mefisto said:
Do you have binary file Su or Superuser.apk installed? If not is not rooted!!!!
Click to expand...
Click to collapse
I got the same tablet for about 10 days now.
How did you manage to get play services work?
I only managed to get the old market work, can you give me the link to the app?
Rooting to a pure android would be great, any time ideas what rom would work?
Manufacturer seems to be Somy.
Same Problem
Has anyone found a solution on which ROM to install on the Turbo-X Hive IV?
(or Somy M10A9...)
I haven't found anything yet...
Same problem
Please if you find something, help!
Need rooting for Turbo X Hive IV (the device is not rooted).
That's what I get when I do system analysis:
Android System Report - 11 Ιαν 2014 11:43:49 π.μ.
#Created by Quick System Info version 1.8.6
Device: HT6
Model: HT6
Product: ht6_sm_m10k9
Brand: Android
Release: 4.2.2
Build: HT6S.SM.M10K9.MUL.B125.WXGA.1211.V3.02
Locale: el_GR
Linux version 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Dec 3 15:37:57 CST 2013
Basic Info
========================================================================================
* SD card storage
Total: 12,61GB, Free: 11,78GB
* A2SD storage
Information not available
* Internal storage
Total: 0,98GB, Free: 334MB
* System storage
Total: 739MB, Free: 262MB
* System cache
Total: 123MB, Free: 116MB
* Memory
Total: 0,95GB, Free: 221MB, Idle: 80,56MB
* Processor
ARMv7 Processor rev 2 (v7l) 1209MHz
* Network
fe80::2cb:43ff:fe71:4855%wlan0, 192.168.1.77, fe80::cb:43ff:fe71:4855%p2p0
Scaling CPU frequency:1209000
Processor : ARMv7 Processor rev 2 (v7l)
processor : 0
BogoMIPS : 2439.94
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 2
Hardware : MT8389
Revision : 0000
Serial : 0000000000000000
MemTotal: 993848 kB
MemFree: 82000 kB
Buffers: 2808 kB
Cached: 143540 kB
SwapCached: 0 kB
Active: 587688 kB
Inactive: 76532 kB
Active(anon): 514032 kB
Inactive(anon): 10068 kB
Active(file): 73656 kB
Inactive(file): 66464 kB
Unevictable: 1660 kB
Mlocked: 23484 kB
HighTotal: 524288 kB
HighFree: 22900 kB
LowTotal: 469560 kB
LowFree: 59100 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 20 kB
Writeback: 0 kB
AnonPages: 519584 kB
Mapped: 184632 kB
Shmem: 4976 kB
Slab: 32788 kB
SReclaimable: 10680 kB
SUnreclaim: 22108 kB
KernelStack: 8504 kB
PageTables: 14708 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 496924 kB
Committed_AS: 6148796 kB
VmallocTotal: 540672 kB
VmallocUsed: 183940 kB
VmallocChunk: 104452 kB
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/secure tmpfs rw,relatime,mode=700 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/[email protected] /system ext4 ro,noatime,noauto_da_alloc,commit=1,data=ordered 0 0
/[email protected] /data ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ordered 0 0
/[email protected] /cache ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ordered 0 0
/dev/block/loop0 /mnt/cd-rom iso9660 ro,relatime 0 0
/[email protected]_f /protect_f ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc,commit=1,data=ordered 0 0
/[email protected]_s /protect_s ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_alloc,commit=1,data=ordered 0 0
/dev/block/vold/179:8 /storage/sdcard0 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:8 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /storage/sdcard0/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
Rooting, Install Google play & Gmail and Multiple users
After long time, testing, modding etc I finally accomplished to Full root my Android tablet Turbo X Hive IV and install Google Play store, Gmail application and Multiple users. I wrote some posts to share them with anyone needs help (I hope it will)
For Rooting Android tablet Turbo X Hive IV guide click blog.stonebug.gr/root-android-tablet-turbo-x-hive-iv-plaisio-store-android-devices/
For Installing Google Play store and Gmail application in Android tablet Turbo X Hive IV guide click blog.stonebug.gr/install-google-play-and-gmail-android-tablet-using-turbo-x-hive-iv-tablet/
For enabling the Multi User feature on Android tablet Turbo X Hive IV and share applications guide click blog.stonebug.gr/enable-multiple-users-feature-android-4-2-using-tablet-turbo-x-hive-iv/
Rooting Turbo X Hive IV
astonakis said:
After long time, testing, modding etc I finally accomplished to Full root my Android tablet Turbo X Hive IV and install Google Play store, Gmail application and Multiple users. I wrote some posts to share them with anyone needs help (I hope it will)
For Rooting Android tablet Turbo X Hive IV guide click blog.stonebug.gr/root-android-tablet-turbo-x-hive-iv-plaisio-store-android-devices/
For Installing Google Play store and Gmail application in Android tablet Turbo X Hive IV guide click blog.stonebug.gr/install-google-play-and-gmail-android-tablet-using-turbo-x-hive-iv-tablet/
For enabling the Multi User feature on Android tablet Turbo X Hive IV and share applications guide click blog.stonebug.gr/enable-multiple-users-feature-android-4-2-using-tablet-turbo-x-hive-iv/
Click to expand...
Click to collapse
Sorry man, doesn't work...
johntziallas said:
Sorry man, doesn't work...
Click to expand...
Click to collapse
Which one did nt' work for you?
Rooting?
GPlay & Gmail ?
Multi user?
Did you follow the steps one by one ?
Do you have the 3G Hive IV ?
Tried it with 2 different Turbo X Hive IV (not 3G) tablets and it worked fine!
astonakis said:
Which one did nt' work for you?
Rooting?
GPlay & Gmail ?
Multi user?
Did you follow the steps one by one ?
Do you have the 3G Hive IV ?
Tried it with 2 different Turbo X Hive IV (not 3G) tablets and it worked fine!
Click to expand...
Click to collapse
Yes I have the 3G Hive IV
The rooting didn't work...
Any ideas?
---------- Post added at 03:14 AM ---------- Previous post was at 02:29 AM ----------
astonakis said:
Which one did nt' work for you?
Rooting?
GPlay & Gmail ?
Multi user?
Did you follow the steps one by one ?
Do you have the 3G Hive IV ?
Tried it with 2 different Turbo X Hive IV (not 3G) tablets and it worked fine!
Click to expand...
Click to collapse
When I try to run superSU I get a message saying 《There is no SU binary installed And SU cannot install it. This is a problem!》
Download Framaroot, install, run and select the first option. Reboot, run again and select the second option. Reboot and the tablet is rooted.
Visit http://forum.xda-developers.com/showthread.php?t=1893410&page=16 and follow the instructions at post #159 to install Google Services and Google Play to the Tablet.
That's it!!
vitocorl said:
Download Framaroot, install, run and select the first option. Reboot, run again and select the second option. Reboot and the tablet is rooted.
Visit http://forum.xda-developers.com/showthread.php?t=1893410&page=16 and follow the instructions at post #159 to install Google Services and Google Play to the Tablet.
That's it!!
Click to expand...
Click to collapse
Have you tried it with the specified Android tablets? Did it worked? Can you send an image proving it ?
Thanks anyway!
I have tried it, i have rooted 3 tablets in my company and i have installed Google Play on them. I cannot send you an image, since i do not have the tablets with me anymore, our sales people use them, but i can help you if you need something on the process. In fact, it is very-very easy to do it. Download and install framaroot, run it and select the only option visible. Reboot and run it again, you will have a second option, select it and reboot again-you are rooted!
Possible malfunction of framaroot
vitocorl said:
I have tried it, i have rooted 3 tablets in my company and i have installed Google Play on them. I cannot send you an image, since i do not have the tablets with me anymore, our sales people use them, but i can help you if you need something on the process. In fact, it is very-very easy to do it. Download and install framaroot, run it and select the only option visible. Reboot and run it again, you will have a second option, select it and reboot again-you are rooted!
Click to expand...
Click to collapse
Thanks for your help and time ! I tried to use framaroot but didn't work. After installation, the only visible option was "Aragorn", which I pressed but a message popped up saying that root was unsuccesful unfortunately no other options to press on main screen. Any other suggestions? I am open to anything, just help me root this disappointing product. Thanks again for your time
Reboot, run Framaroot again and then you will have the second option (boromir i think). Select Boromir and reboot again, finished!!!
Rooting TuRBOX HIVE IV 3G+GPS
vitocorl said:
Download Framaroot, install, run and select the first option. Reboot, run again and select the second option. Reboot and the tablet is rooted.
Visit http://forum.xda-developers.com/showthread.php?t=1893410&page=16 and follow the instructions at post #159 to install Google Services and Google Play to the Tablet.
That's it!!
Click to expand...
Click to collapse
THIS IS THE BEST METHOD EVER AND FAR AWAY !!!!!!!!!!!!!!!!!!!!
TOO FAST AND SECURE.
follow the steps as they discribed above.
Hello everybody,
VitoCorl... please, can you describe what you do with your HIVE IV then you root them. I buy one from plaisio, and there is no way to root them. Somebody, if know how ...PLEASE HELPPPPP.
please i need immediate help
i installed superuser on the hive iv
it worked fine for 3-4 months
but now all of a sudden its dead
no charge no boot nothing
just dead
since i have installed superuser i dont have warranty
right?
should i just take it back to the shop?
please help!
Turbo X Hive IV Bricked! Please help!!!
Hello!
I tried to install CWM recovery on TurboX Hive IV tablet and it stuck on the Allwinner A31S LOGO...
please, can anyone sent me a copy of the original stock Firmware or anything...
Does anyone knows a way to make it work again?
The technical information are the following
Turbo X Hive IV, 10.1", 1280 x 800 pixels, IPS panel, Front camera 0.3 mp, back camera 5mp, android 4.2.2, CPU QuadCore-A31 Series at 1.2 GH, Internal storage 16GB, Ram - 1GB, Wifi, Bluetooth, Mini HDMI, Micro USB 2.0 Micro usb 2.0 host , microSD card slot, Li-Ion 6000 mah
Model M10A9
Firmware 3.2_2013704
Kernel 3.3.0 [email protected] #4
Mr.Mefisto said:
Do you have binary file Su or Superuser.apk installed? If not is not rooted!!!!
Click to expand...
Click to collapse
hi .... i really want custom rom for this tablet ... any idea ?
Hello,I know that this thread is very old,but before one year, I tried to flash a custom recovery on my turbo x hive iv tablet, the
TWRP for Android One Second Generation MTK with code name seedmtk, because I thought it would work since my tablet was a mediatek device, but I falsely flashed the recovery on both boot and recovery partitions and bricked both recovery and boot modes.I want to mention though that I have partial access to fastboot mode (I have installed also mtk drivers) and it seems that I can't flash to recovery partition,but I can flash on boot, so all I want from everyone here if it's possible, is the stock boot.img of this tablet because I'm almost sure that it will boot since system partition is not broken and it was booting before I flash on boot partition without recovery or factory mode though.
Anyway,with a few words if you bored of reading this,I want the boot + recovery.img if it's possible,I know this tablet can't do many things,but I would like to fix it.
[Q&A] [v9.52] Online Nandroid / Nandroid Backup without re-booting [CWM + TWRP + 4EX
Q&A for [v9.52] Online Nandroid / Nandroid Backup without re-booting [CWM + TWRP + 4EXT]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [v9.52] Online Nandroid / Nandroid Backup without re-booting [CWM + TWRP + 4EXT]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hey everybody,
I was setting up online Nandroid on my S4Mini LTE (I9195) and everything looks good so far. Except that preload is not being backup-ed. I also installed the the required recognition script. When using TWRP via recovery I am able to backup the preload partition.
Any ideas why I cannot backup the preload partition online?
Thanks,
Sebastian
bjacke said:
Hey everybody,
I was setting up online Nandroid on my S4Mini LTE (I9195) and everything looks good so far. Except that preload is not being backup-ed. I also installed the the required recognition script. When using TWRP via recovery I am able to backup the preload partition.
Any ideas why I cannot backup the preload partition online?
Thanks,
Sebastian
Click to expand...
Click to collapse
Which recognition script did you install?
ameer1234567890 said:
Which recognition script did you install?
Click to expand...
Click to collapse
Hey,
I used "Samsung Galaxy S IV Mini LTE GT-I9195" ->serranolte. Is this the correct one?
Basti
bjacke said:
Hey,
I used "Samsung Galaxy S IV Mini LTE GT-I9195" ->serranolte. Is this the correct one?
Basti
Click to expand...
Click to collapse
Could you post the log file inside one of the backup folders?
Hey.
I've got problem. Lg l7II, sock kk rom rooted. I can't make backup on my external_SD, set in onb settings backup location external_SD, but backup still is created ie my internal memory. I know, that android kk not allow save files external micro sd card for third-party apps, but i've installed sd fix. but without result. So where is wrong?
Here's log:
Starting backup...
Running with the following commands: -o --custom kk_rooted --storage /external_sd -pd -r
Using Default Shell
##########################################
Online Nandroid Backup v9.52
* A tool to perform a nandroid backup
without booting into recovery.
* It is fully compatible with nandroid.
* Type 'onandroid --help' for usage
instructions.
* Created by Ameer Dawood
##########################################
14:30:44 Using busybox from: /data/data/com.h3r3t1c.onnandbup/files/busybox
14:30:44 Checking for root permissions...
14:30:44 Root permissions acquired!
14:30:44 Analysing battery level...
14:30:44 Sufficient battery available!
14:30:44 Checking version of BusyBox installed...
14:30:44 BusyBox version 1.20 or above installed!
14:30:44 Searching for SD card...
14:30:44 SD card found!
14:30:44 This device has a patch file installed!
14:30:44 Checking for required tools...
14:30:45 All required tools available!
14:30:45 Checking disk space...
14:30:45 SD Card Free Space: 1186 MB
14:30:45 Required Space: 1719 MB
14:30:46 Not enough disk space! Exiting...
exitcode [86]
Kura pazurem to wydrapała, a Xperia Neo V Tapatalkiem 4 wysłała
Ok, problem solved. It was mistake with backup save location. After changing to /storage/external_SD instead external sd, it working as it should.
Wysłano przy użyciu LG L7 II (P710) Tapatalkiem
Patch or No Patch - That Is the....
Help!
Folks, I have one, perhaps-challenging question, and I am hoping that there will be a fairly straightforward answer from one or more of the obviously-above-average-intelligence contributors to XDA.
I recently purchased a Foxconn house-branded phone, an 'InFocus M512'. I had only.moderate expectations - you usually get what you pay for - but, it has exceeded my expectations from almost every angle. However, it arrived already-rooted. And now that I've invested some hours (I'm embarrassed to admit how many) investigating and installing security/privacy apps and mods, and debloating it, I'm really satisfied and it's no longer the cheap throwaway I had originally purchased... and given how many changes I've already made, it's pure luck that I haven't bricked it; I'm waaaay overdue for a full NAND backup.
But, I have no recoveries for it, I have no idea how it was rooted or what magic was thrown at it before it landed in my inexperienced hands. It's KK 4.4.2 - that much I do know. And the launcher is a lightly themed MIUI, as far as I can tell.
I installed Online Nandroid, looking like my best / only option to create a recovery.
I clicked on the 'Get Device Identified' button in Nandroid, which returned a device code MC2_CN - not in the downloaded patch list, of course. So, then I clicked on the 'Request a patch from Santa Claus' button...
I'm not holding my breath, waiting for Ameer to come up with a patch for me; I'm sure he has bigger fish to fry, and this phone is just one in the sea of obscure Chinese mutations (that's an actual place, I think).
So... here it is... finally... my question:
What's my next step?
Is there one? (Oh crap, that's two questions) Have I been too wordy? (Damn, that's three... and don't answer it - you'll hurt my feelings.
Any informed advice would be hugely appreciated.
Thanks. :fingers-crossed:
Is this app currently maintained? I thought I would help out and sent in a patch weeks ago for my device (LG Realm) and never heard anything back. I also never got a response as to whether or not I can somehow load and use my own patch with the correct partition layout instead of having to download it.
????
codebot said:
Is this app currently maintained? I thought I would help out and sent in a patch weeks ago for my device (LG Realm) and never heard anything back. I also never got a response as to whether or not I can somehow load and use my own patch with the correct partition layout instead of having to download it.
????
Click to expand...
Click to collapse
It is still being maintained. The pace is, however, a bit slower.
Nandroid Backup for UBIFS
Sir regarding for NANDROID BACKUP it could be work in this UBIFS device?
ameer1234567890 said:
It is still being maintained. The pace is, however, a bit slower.
Click to expand...
Click to collapse
I'm willing to do any testing for an updated SM-N910T. Please just let me know.
Sent from my Note 4 with Tapatalk
SJMarty said:
I'm willing to do any testing for an updated SM-N910T. Please just let me know.
Sent from my Note 4 with Tapatalk
Click to expand...
Click to collapse
Yikes...has the script been abandoned? That would stink.
Does Online Nandroid Backup work for Alcatel OT 5020D?
I tried to restore some apps with a Nandroid Manager and even if the app didn't show any error, none of the restored apps worked. After trying to run them they always crashed.
Not boot found not recovery found
Hi, i tried these script for my Xperia Neo mt15i, in your site in the list of supported devices says that no need of path file for my hallon but during the backup appears this message, and i don't know what is wrong, Online Nandroid makes appslog .android_secure system data cache, but it's strange no boot, recovery, and bootloader. It's something wrong?
elasca said:
Hi, i tried these script for my Xperia Neo mt15i, in your site in the list of supported devices says that no need of path file for my hallon but during the backup appears this message, and i don't know what is wrong, Online Nandroid makes appslog .android_secure system data cache, but it's strange no boot, recovery, and bootloader. It's something wrong?
Click to expand...
Click to collapse
Can you post the log file inside backup folder?
ameer1234567890 said:
Can you post the log file inside backup folder?
Click to expand...
Click to collapse
Online Nandroid v9.52
Started at Sun May 3 00:58:58 CEST 2015
###########################
Run with options:
###########################
Busybox: BusyBox v1.21.1-jb static (2013-07-25 21:23 +0100) multi-call binary.
###########################
File System Layout:
rootfs on / type rootfs (ro,seclabel,relatime)
tmpfs on /dev type tmpfs (rw,seclabel,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,seclabel,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,seclabel,relatime)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
none on /acct type cgroup (rw,relatime,cpuacct)
tmpfs on /mnt/secure type tmpfs (rw,seclabel,relatime,mode=700)
tmpfs on /mnt/asec type tmpfs (rw,seclabel,relatime,mode=755,gid=1000)
tmpfs on /mnt/obb type tmpfs (rw,seclabel,relatime,mode=755,gid=1000)
tmpfs on /mnt/fuse type tmpfs (rw,seclabel,relatime,mode=775,gid=1000)
none on /dev/cpuctl type cgroup (rw,relatime,cpu)
/dev/block/mtdblock0 on /system type yaffs2 (ro,seclabel,relatime)
/dev/block/mtdblock3 on /data type yaffs2 (rw,seclabel,nosuid,nodev,relatime)
/dev/block/mtdblock1 on /cache type yaffs2 (rw,seclabel,nosuid,nodev,relatime)
/dev/block/vold/179:1 on /storage/sdcard0 type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
/dev/block/vold/179:1 on /mnt/secure/asec type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
tmpfs on /storage/sdcard0/.android_secure type tmpfs (ro,seclabel,relatime,size=0k,mode=000)
###########################
Device Details:
ro.product.model=MT15i
ro.product.brand=SEMC
ro.product.name=MT15i
ro.product.device=hallon
ro.product.board=mogami
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony Ericsson
###########################
Recovery:
CWM-based Recovery v6.0.4.6
###########################
Language File:
Not found!
###########################
00:58:59 Using busybox from: busybox
00:58:59 Checking for root permissions...
00:58:59 Root permissions acquired!
00:58:59 Analysing battery level...
00:58:59 Sufficient battery available!
00:58:59 Checking version of BusyBox installed...
00:58:59 BusyBox version 1.20 or above installed!
00:58:59 Searching for SD card...
00:58:59 SD card found!
00:58:59 This is an MTD based device!
00:59:00 Checking for required tools...
00:59:00 All required tools available!
00:59:01 Checking disk space...
00:59:02 SD Card Free Space: 4159 MB
00:59:02 Required Space: 839 MB
00:59:02 Necessary disk space available!
00:59:02 Detecting mountpoints to exclude...
00:59:02 Backing up to /storage/sdcard0/clockworkmod/backup/2015-05-02.22.58.59
00:59:02 /boot not found! Skipping backup of /boot!
00:59:02 Consider installing patch file for your device, for a complete nandroid!
00:59:02 /recovery not found! Skipping backup of /recovery!
00:59:03 Backing up /appslog...\c
00:59:05 Backing up /system...\c
01:04:01 Backing up /data...\c
01:11:01 Backing up /cache...\c
01:12:02 Backing up /.android_secure...\c
01:12:12 Generating md5sum...\c
01:13:04 Verifying md5sum...\c
01:13:05 Online Nandroid Backup Completed in 14 minutes 6 seconds!
###########################
Files Backed-up:
"----rwxr-x 1 1536 May 3 01:12 .android_secure.vfat.tar
----rwxr-x 1 6291456 May 3 00:59 appslog.img
----rwxr-x 1 96431808 May 3 01:12 cache.yaffs2.img
----rwxr-x 1 373038336 May 3 01:10 data.yaffs2.img
----rwxr-x 1 258 May 3 01:13 nandroid.md5
----rwxr-x 1 421466496 May 3 01:04 system.yaffs2.img"
@elasca This is common among Xperia devices. Your backup should just be fine. Your custom recovery (CWM / TWRP) would also not backup boot and recovery.
ameer1234567890 said:
@elasca This is common among Xperia devices. Your backup should just be fine. Your custom recovery (CWM / TWRP) would also not backup boot and recovery.
Click to expand...
Click to collapse
Do you know an alternative method to back up these partitions? I don't see these partitions even on terminal, it should be showed using "cat /proc/partitions" command, but only shows system, cache, appslog, data, and sdcard, no recovery, boot, bootloader, and other partitions showed in my Wolder tablet with Allwinner chipset.
I have also the question for these tablet, i can backup recovery and boot partitions manually but with nandroid appears "boot not found" and "recovery not found", are you working for a patch file for this tablets?
Thank you.
ameer1234567890 said:
@elasca This is common among Xperia devices. Your backup should just be fine. Your custom recovery (CWM / TWRP) would also not backup boot and recovery.
Click to expand...
Click to collapse
Hi ameer just wanted to thank you for still supporting the app . And for uploading the patch for my Lg tribute aka e2nas. I thought it was a dead issue ,im glad you brought it back to life!!
sent from my VM LGLS660 rooted on zv5