Related
(STEP 1 GOLDCARD)
Finaly i done it all phew i had a really long day learning yesterday from the start i was on the tmobile latest rom RUU_Hero_TMobile_UK_2.73.110.26_release_signed_NoDriver.exe
I figured out the goldcard soulotion http://forum.xda-developers.com/showthread.php?t=572683
Great video guide here http://theunlockr.com/2009/10/18/how-to-downgrade-your-htc-hero-so-it-can-be-rooted/
01. Download QMAT 5.06 here http://revskills.de/downloads/qmat_506.zip
It’s a demo version so will only run for 10 minutes.
02. Format your SD card to FAT32. Please keep in mind some brands of SD cards do not work. Note sd card must be in phone here
03. Use adb to run this command: adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid
04. Copy the SD card cid code displayed after the adb command.
05. Start Qmat and Click on Cyptoanalysis Tools > Crypto Toolbox.
06. Look at the bottom, there is a text box (beside the “Reverse String” button) enter the SD card cid code you got earlier.
Click on the “Reverse String” button, the result is reversed…
Example: 532600bd227d9c0347329407514d5402
07. Copy the reversed SD card cid code.
08. Go to QMAT goldcard site here http://revskills.de/pages/goldcard.html to generate your goldcard (yes it says for G1 but works for our Hero too).
09. Enter your email. For the correct SD card cid code, you need to replace the first 2 characters to 00.
Example: From “532600bd227d9c0347329407514d5402” to “002600bd227d9c0347329407514d5402”
10. Click Continue and you will receive the goldcard.img in .zip format in your email.
11. Go to your email, download the zip file and save it to a directory and unzip it to goldcard.img
12. Download HxD Hex Editor from here http://download.cnet.com/HxD-Hex-Editor/30....html?tag=mncol
13. Install and launch HxD Hex Editor program. Note SD Card has to be in your pc or reader here at this point NOTE ALSO (run the editor as administrator in order for it to appear)
14. Go to Extra tab > Open Disk. Under Physical disk, select Removable Disk (Must be your SD card), uncheck “Open as Readonly), click OK.
15. Go to Extra again, Open Disk Image, open up goldcard.img which you’ve saved/unzipped earlier.
Now, you should have two tabs, one is your removable disk, the other is goldcard.img. Press OK when prompted for “Sector Size” 512 (Hard disks/Floppy disks), click OK.
16. Click on goldcard.img tab. Go to Edit tab > Select All, edit tab again > copy.
17. Click on the “removable disk” tab. Select offset 00000000 till offset 00000170 (including the 00000170 line), click on Edit tab and then Paste Write.
18. Click on File > Save. now you can exit the program.
19. Reboot your phone with this SD Card (now GoldCard) inside
20. Use the Official HTC RUU to downgrade to 2.73.405.5 here ftp://xda:[email protected]/Hero...ed_NoDriver.exe
from which you can fastboot boot and/or root your phone with flashrec Here http://forum.xda-developers.com/showthread.php?t=559613 (Please see guide below for this)
Done.
(STEP 2 recovery)
You need to install this recovery first with flashrec instructions below
You can use flashrec to flash the patched recovery, from where you can do all the usual stuff (and even put the old hboot back on if you want!)
Notice:
flashrec is using an exploit that isn't patched yet in the current kernel used by HTC, however if/when HTC patches this, flashrec will stop working.
So for now it's ok but a next version might have patched this, so keep this in mind !
Quick Howto:
1. On your phone, goto Settings, Applications, and make sure Unknown source is checked ON.
2. On your phone, goto Settings, SD card and phone storage, and click Unmount SD card.
3. Then click Format SD card (it should automatically remount after this).
4. Plug the phone into the compuer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
5. Download this APK and recovery image and save it to your computer:
flashrec-20090815.apk
Cyanogen’s / Modaco Hero Recovery Image
Update: updated flashrec here
6. Extract the cm-hero-recovery.img out of the MoDaCoPatchedRecovery-1.0.zip and put it somewhere on your computer.
7. Save both the cm-hero-recovery.img and the flashrec-20090815.apk to your computer, then copy them both to your SD card
(do NOT put them inside any folders on the SD card, just put them in the root of the SD card itself).
8. Unplug the phone from the computer once they are downloaded to the SD card.
9. Goto the Market and download Linda File Manager or any file manager program if you do not already have one.
10. Open the file manager and goto SDCard and then find the flashrec-20090815.apk file and click on it.
If asked, tell it to use Package Installer to open it. It should automatically install the apk.
11. Open the FlashRec program and click on Backup Recovery Image and wait for it to finish.
12. Once done, click on the empty text box in the FlashRec program and type:
sdcard/cm-hero-recovery.img
Then click on the Flash Custom Recovery Image button and wait for it to finish.
13. Turn off the phone and turn it on into Recovery mode by holding down Home and Power to turn it on
(keep holding until the recovery screen comes up has a bunch of text on a black background).
As long as that screen comes up, you have done it correctly and can now go and load other ROM/hboot/whatever.
THIS IS OPTIONAL RECOVERY BELOW BETTER OPTIONS BUT YOU NEED THE ABOVE RECOVERY FIRST
I then flashed the new recovery-RA-HERO-v1.2.3 Great Video guide here http://theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted/
http://forum.xda-developers.com/showthread.php?t=561124
There are several ways to install a custom recovery, choose the one that suits you most
via adb -> Requires a custom recovery (with test-keys) like Cyanogen's v1.4 or my previous recovery
Code:
Copy recovery-RA-HERO-v1.2.3.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
Connect your Hero via usb to your pc/mac/...
adb shell
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-HERO-v1.2.3.img
(STEP 3 INSTALL CUSTOM ROM)
Then i installed the cool modaco custom rom v2.8 to my phone http://android.modaco.com/content/htc-hero...com/292018/xda/
Great Video guide here http://theunlockr.com/2009/08/27/how-to-load-a-custom-rom-on-your-htc-hero/
Also dont forget to upgrade your radio here http://android.modaco.com/content/htc-hero...ate-zip-format/
Download the latest one normally on the top to install rename the zip to Update put on root of SD card and boot into recovery and install update.zip option easy as that.
STEP 4 PARTITION SD CARD)
Then finaly i partioned my sd card using the recovery imiage with thease commands directly from the phone in recovery.
I ran the following commands in this order from recvoery mode:
- Wipe data + cache (factory reset)
- Wipe ext partition on SD-card
- Wipe Dalvik-cache on SD-card (NOT on /data !) [email protected] ALWAYS WORK
- Partition SD-card : 500MB Ext2, 32MB Swap, remaining Fat32
- Convert ext2 to ext3
- Installed ROM
ANOTHER GREAT GUIDE HERE FOR WINDOWS TERMINAL USERS http://androidandme.com/2009/08/news/how-to-manually-partition-your-sd-card-for-android-apps2sd/
what a nice day and now i have a super hero
PS ANY QUESTIONS I WOULD BE GLAD TO HELP WITH ANY PROBLEMS THATS WHAT I AM HERE FOR THANKS.
Mods if you think this is usefull for noobs then you may sticky if you want thanks to all.
If anyone wants to add anything or finds something wrong with the guide please let me know so i can edit it thanks to all that made this possible.
hi, i got an error 170 when trying to do step 20 in section 1(downgrade rom)!
GaRd3NiA said:
hi, i got an error 170 when trying to do step 20 in section 1(downgrade rom)!
Click to expand...
Click to collapse
you could have not done the steps corectly my advice is to start again from the start.
What is the point of this gold card process? Noobish question i am sure just i have a rooted phone already so will this give me anything additonal guys? Ta
MojUk said:
What is the point of this gold card process? Noobish question i am sure just i have a rooted phone already so will this give me anything additonal guys? Ta
Click to expand...
Click to collapse
the point of this is for users that upgraded to the new rom and can't downgrade back and updated there hboots u need the goldcard the rest is all optional hence the road to freedom for your hero.
need help
hi. is this procedure it will work with Htc Hero from Hong Kong? i was trying several procedures founded on google, but no one worked.
QMAT 5.06 link has changed
https://ssl.webpack.de/revskills.de/pages/download.html
HTC Hero problems after gold card procedeure
jutley said:
(STEP 1 GOLDCARD)
Finaly i done it all phew i had a really long day learning yesterday from the start i was on the tmobile latest rom RUU_Hero_TMobile_UK_2.73.110.26_release_signed_NoDriver.exe
I figured out the goldcard soulotion http://forum.xda-developers.com/showthread.php?t=572683
Great video guide here http://theunlockr.com/2009/10/18/how-to-downgrade-your-htc-hero-so-it-can-be-rooted/
01. Download QMAT 5.06 here http://revskills.de/downloads/qmat_506.zip
It’s a demo version so will only run for 10 minutes.
02. Format your SD card to FAT32. Please keep in mind some brands of SD cards do not work. Note sd card must be in phone here
03. Use adb to run this command: adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid
04. Copy the SD card cid code displayed after the adb command.
05. Start Qmat and Click on Cyptoanalysis Tools > Crypto Toolbox.
06. Look at the bottom, there is a text box (beside the “Reverse String” button) enter the SD card cid code you got earlier.
Click on the “Reverse String” button, the result is reversed…
Example: 532600bd227d9c0347329407514d5402
07. Copy the reversed SD card cid code.
08. Go to QMAT goldcard site here http://revskills.de/pages/goldcard.html to generate your goldcard (yes it says for G1 but works for our Hero too).
09. Enter your email. For the correct SD card cid code, you need to replace the first 2 characters to 00.
Example: From “532600bd227d9c0347329407514d5402” to “002600bd227d9c0347329407514d5402”
10. Click Continue and you will receive the goldcard.img in .zip format in your email.
11. Go to your email, download the zip file and save it to a directory and unzip it to goldcard.img
12. Download HxD Hex Editor from here http://download.cnet.com/HxD-Hex-Editor/30....html?tag=mncol
13. Install and launch HxD Hex Editor program. Note SD Card has to be in your pc or reader here at this point NOTE ALSO (run the editor as administrator in order for it to appear)
14. Go to Extra tab > Open Disk. Under Physical disk, select Removable Disk (Must be your SD card), uncheck “Open as Readonly), click OK.
15. Go to Extra again, Open Disk Image, open up goldcard.img which you’ve saved/unzipped earlier.
Now, you should have two tabs, one is your removable disk, the other is goldcard.img. Press OK when prompted for “Sector Size” 512 (Hard disks/Floppy disks), click OK.
16. Click on goldcard.img tab. Go to Edit tab > Select All, edit tab again > copy.
17. Click on the “removable disk” tab. Select offset 00000000 till offset 00000170 (including the 00000170 line), click on Edit tab and then Paste Write.
18. Click on File > Save. now you can exit the program.
19. Reboot your phone with this SD Card (now GoldCard) inside
20. Use the Official HTC RUU to downgrade to 2.73.405.5 here ftp://xda:[email protected]/Hero...ed_NoDriver.exe
from which you can fastboot boot and/or root your phone with flashrec Here http://forum.xda-developers.com/showthread.php?t=559613 (Please see guide below for this)
Done.
(STEP 2 recovery)
You need to install this recovery first with flashrec instructions below
You can use flashrec to flash the patched recovery, from where you can do all the usual stuff (and even put the old hboot back on if you want!)
Notice:
flashrec is using an exploit that isn't patched yet in the current kernel used by HTC, however if/when HTC patches this, flashrec will stop working.
So for now it's ok but a next version might have patched this, so keep this in mind !
Quick Howto:
1. On your phone, goto Settings, Applications, and make sure Unknown source is checked ON.
2. On your phone, goto Settings, SD card and phone storage, and click Unmount SD card.
3. Then click Format SD card (it should automatically remount after this).
4. Plug the phone into the compuer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
5. Download this APK and recovery image and save it to your computer:
flashrec-20090815.apk
Cyanogen’s / Modaco Hero Recovery Image
Update: updated flashrec here
6. Extract the cm-hero-recovery.img out of the MoDaCoPatchedRecovery-1.0.zip and put it somewhere on your computer.
7. Save both the cm-hero-recovery.img and the flashrec-20090815.apk to your computer, then copy them both to your SD card
(do NOT put them inside any folders on the SD card, just put them in the root of the SD card itself).
8. Unplug the phone from the computer once they are downloaded to the SD card.
9. Goto the Market and download Linda File Manager or any file manager program if you do not already have one.
10. Open the file manager and goto SDCard and then find the flashrec-20090815.apk file and click on it.
If asked, tell it to use Package Installer to open it. It should automatically install the apk.
11. Open the FlashRec program and click on Backup Recovery Image and wait for it to finish.
12. Once done, click on the empty text box in the FlashRec program and type:
sdcard/cm-hero-recovery.img
Then click on the Flash Custom Recovery Image button and wait for it to finish.
13. Turn off the phone and turn it on into Recovery mode by holding down Home and Power to turn it on
(keep holding until the recovery screen comes up has a bunch of text on a black background).
As long as that screen comes up, you have done it correctly and can now go and load other ROM/hboot/whatever.
THIS IS OPTIONAL RECOVERY BELOW BETTER OPTIONS BUT YOU NEED THE ABOVE RECOVERY FIRST
I then flashed the new recovery-RA-HERO-v1.2.3 Great Video guide here http://theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted/
http://forum.xda-developers.com/showthread.php?t=561124
There are several ways to install a custom recovery, choose the one that suits you most
via adb -> Requires a custom recovery (with test-keys) like Cyanogen's v1.4 or my previous recovery
Code:
Copy recovery-RA-HERO-v1.2.3.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
Connect your Hero via usb to your pc/mac/...
adb shell
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-HERO-v1.2.3.img
(STEP 3 INSTALL CUSTOM ROM)
Then i installed the cool modaco custom rom v2.8 to my phone http://android.modaco.com/content/htc-hero...com/292018/xda/
Great Video guide here http://theunlockr.com/2009/08/27/how-to-load-a-custom-rom-on-your-htc-hero/
Also dont forget to upgrade your radio here http://android.modaco.com/content/htc-hero...ate-zip-format/
Download the latest one normally on the top to install rename the zip to Update put on root of SD card and boot into recovery and install update.zip option easy as that.
STEP 4 PARTITION SD CARD)
Then finaly i partioned my sd card using the recovery imiage with thease commands directly from the phone in recovery.
I ran the following commands in this order from recvoery mode:
- Wipe data + cache (factory reset)
- Wipe ext partition on SD-card
- Wipe Dalvik-cache on SD-card (NOT on /data !) [email protected] ALWAYS WORK
- Partition SD-card : 500MB Ext2, 32MB Swap, remaining Fat32
- Convert ext2 to ext3
- Installed ROM
ANOTHER GREAT GUIDE HERE FOR WINDOWS TERMINAL USERS http://androidandme.com/2009/08/news/how-to-manually-partition-your-sd-card-for-android-apps2sd/
what a nice day and now i have a super hero
PS ANY QUESTIONS I WOULD BE GLAD TO HELP WITH ANY PROBLEMS THATS WHAT I AM HERE FOR THANKS.
Mods if you think this is usefull for noobs then you may sticky if you want thanks to all.
Click to expand...
Click to collapse
hi, was following your procedure in order to crezte the Gold Card. Everything goes perfect up to step 20. After I used to flash with RUU_Hero_HTC_WWE_2.73.405.6_WWE_release_signed_NoDriver.exe; big mistake. after flashing I can't put phone in recovery mode, it showing a triangle with a exclamation mark in the center, also GPS is not existing at all, 3 G network not present. My phone has been bought from Hong Kong.
I was trying to follow the steps to recovery but useless; flashrec-20090815.apk is not working, even the new versions. If someone can help me with some advices, i'm really desperate. thanks
help please!!!!
Hi all. after I create the gold card, see link http://forum.xda-developers.com/showthread...187#post5036187, I RUU my Htc Hero from Hong Kong with SEA: (South East Asia)
RUU_Hero_HTC_Asia_SEA_WWE_2.73.728.5_release_signe d_NoDriver.exe and I'd seen there is no GPS, Market and 3G, than I'd applied another RUU RUU_Hero_HTC_WWE_2.73.405.66_WWE_test_signed_NoDri ver.exe and this time I have Market, but still no GPS and 3G. I tried different RUU from http://forum.xda-developers.com/showthread.php?t=559622, but no one working, not even the previous two. I tried to use flashrec-20090815.apk in order to flash, but no working. even the new version of flashrec not working. I tried to put in recovery mode holding POWER + HOME button, but after boot is showing a triangle with exclamation mark in the middle. Same is happening if I try to go in recovery mode from ADB (command adb shell reboot recovery). Is somebody so kind to explain me what to do in order to restore my phone at least how it was before, please? My skills in android development are 0. thanks
help please!!!!
so, nobody wants to help me ? i'm really desperate ...........
finally, I made again the gold card, after I re flash with RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe, and works. Than I used flashrec-1.1.3-20091107-2.apk and recovery-RA-hero-v1.5.2.img and I created Backup.img. Tried to put in recovery mode by pressing in the same time Power and Home and I got the following screen:
"reboot system now [Home+Back]
apply sdcard:update.zip [Alt+S]
wipe data/factory reset [Alt+W]"
"E:Can't open /cache/recovery/command"
BTW, GPS and 3G still missing from menu. Trying to update with 2.8-update-hero-modacocustomrom-core-chinese-signed.zip or with 3.0-update-hero-modacocustomrom-core-signed.zip, I got this :
" -- Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:No signature (663 files)
E:Verification failed
Installation aborted."
Phone hanging, freezing.... HELPPPPPP please!!!!!!!!
I forgot to mention these details:
Original version
phone type is EBI132A
Firmware version: 1,5
baseband version 63.18.55.06EU_6.35.06.18
Kernel Version:**2.6.27 - 44690c1a
Build no: 2.73.721.9 **146733 CL#62020
Soft Version 1.0.0.A 6288
Actual version
Firmware version: 1,5
baseband version 63.18.55.06EU_6.35.06.18
Kernel Version:**2.6.27 - 8dd6deee [email protected])
Build no: 2.73.405.5**146733 CL#61267
Soft Version 1.0.0.A 6288
this is what I got:
What else i can do?
Is there anyone here in this forum who has been complimentary to this guide? I ask because I am an organizer of the recognition awards for Achievement in Technical Writing & Guides (to help people use their phones)... And the Android forums are new, and thus there has been very little response to the intention to recognize those who have contributed knowledge, apps, themes, guides to the community.
thank you. see my sig.
ovigt71 said:
I forgot to mention these details:
Original version
phone type is EBI132A
Firmware version: 1,5
baseband version 63.18.55.06EU_6.35.06.18
Kernel Version:**2.6.27 - 44690c1a
Build no: 2.73.721.9 **146733 CL#62020
Soft Version 1.0.0.A 6288
Actual version
Firmware version: 1,5
baseband version 63.18.55.06EU_6.35.06.18
Kernel Version:**2.6.27 - 8dd6deee [email protected])
Build no: 2.73.405.5**146733 CL#61267
Soft Version 1.0.0.A 6288
Click to expand...
Click to collapse
Hi, I have the exact same hero as you do (same system etc..). Didn't work with the "RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed_NoDriver.exe"
so am now about to try it with this one:
RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe
but after reading you post I am a lil weary...
is you hero still not working 100%??
Thx
1. Bricked my rooted G2 with 2.1 rom by interrupting the radio update process
2. Got it back within 5 days repaired in warranty FOC! mainboard replaced.
3. Flashrec backup recovery did not work, so had to go into goldcard method. (2.73.110.26 CL#69351)
4. Update succesfull. I thank you very much for your efforts Even the ugly static G2 T-Mobile screen now says HERO
5. Linda File Manager + FlashREC
6. Backup recovery -> Backup complete
THANKS
I got a Customer Id Error when I try to install either
RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed _NoDriver.exe
or
RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoD river.exe
I thought the purpose of the GoldCard was to help bypass the ID checking?
bob_harris said:
I thought the purpose of the GoldCard was to help bypass the ID checking?
Click to expand...
Click to collapse
It is - the point is that the creation of a goldcard is not an exact science. If your goldcard is not correct, for any reason, it won't work.
There have been many accounts on these forums of people having to try 3 or 4 times (usually using different SD cards) before getting a goldcard that works.
Regards,
Dave
foxmeister said:
It is - the point is that the creation of a goldcard is not an exact science. If your goldcard is not correct, for any reason, it won't work.
There have been many accounts on these forums of people having to try 3 or 4 times (usually using different SD cards) before getting a goldcard that works.
Regards,
Dave
Click to expand...
Click to collapse
I got it working on the second attempt. In the tutorial I was reading it advice I use a separate sd card reader when creating the gold card.
On my second attempt I just left the card in the phone the whole time and mounted it through the phone when I needed to perform hex editing on it.
Lovely job, now to choose what custom ROM I shall flash.
Hi,
Please guide me on the procedure to upgrade samsung galaxy5 OS from 2.2 to ICS.
thanks a ton
Regards
Install this:
http://depositfiles.com/files/n0dcxce3t on your computer
switch on USB-Debuging(you'll find it in the settings under development)
connect to your PC
Start SuperOneClick(click root), reboot yout Smartphone after the application did his job.
Install this: ROM Manager click on install recovery.
Download the latest version, extract the rar, but not the zip and put it on your sd-card
Make a factory reset, and install the zip from your sd card in the recovery.
hit Thanks
First backup your phone's data.
Navigate to Settings > Applications > Development > USB debugging. Now tick the check box here.
Proceed to next page. We have summed up a detailed tutorial on how to apply this alpha version of ICS Android 4.0.3 Firmware.
Hi,
I'm new to this forum and a beginner to learn about android devices. I have a Gionee E3 android device (Asian version - English) with Android 4.2.1 on it. Unfortunately I have forgot the pattern lock and to make matter worse the following problems are also included -
1) No root - the device is not rooted
2) No USB Debugging
3) No custom recovery (I guess, only (stock recovery), Android system Recovery is displayed when tried pressing volume + and power key combination )
4) No wi-fi or mobile data could be enabled as the lock won't allow even to slide the screen from the top to get quick access to these things.
5) Windows Xp on my pc
I have tried the following -
1) ADB method to delete the gesture.key, but as the device is not rooted, failed with this attempt with several errors.
2) Tried from Cygwin, but the SU command gave error - -bash: su: command not found
3) Tried Aroma file manager zip file from Android system recovery ----> apply update from SD card, returned error - Installation aborted. Tried to resolve by fixing the updater script file through Notepad++ with different versions of Aromafm but nothing works.
4) Tried with several pattern cracking software .zip files through Android system recovery ----> apply update from SD card, still getting error - Installation aborted.
Kindly help me to recover my data intact.
Don't want to root the device and there may be the risk of wiping the data off.
I have also tried to backup from Android system recovery ----> backup user data and 300 MB of data has been backup on SD card. Does this include SMS and phone contacts too with whatsapp data also?
Thanks in advance and sorry for long description, just wanted to make sure you guys know all the things I have tried. Your help will be greatly appreciated.
Sam
Hi everyone, I recently bought a Xiaomi Mi box3c and was very disappointed with custom rom and the interface that it came with on it. So surfing the web there are a few tutorials on how to change it and I tried a few but they are not that great either, till finally someone patched the stock android TV Lean back Launcher for it, it took some tinkering but I got it working, this may not be the best way but this is how I did it form the start. This is not my work, I just followed instructions and I have gathered them here. As I am lazy Im not gonna provide pictures for every step but it’s pretty straight forward.
For using some the apps during the process you will need usb mouse cause not every apps supports Mibox remote configuration
As I am a new poster I am not allowed to post any links so change every dot word to an actual . for the links.
1. Turning on the Box and Changing to English
1.1 Download this apk provided by Xiaomi veterans on forum, it’s a shortcut to the stock android setting
drive dot google dot com/open?id=0B16bkj0QSkYnc0k2UUFTU05vSHM 1.2 copy the apk to a normal usb flash drive and connect to mibox and install the apk
1.3 Run it and now you can change the language as in any android device.
2. Downgrading Firmware
All of the root options available for this device are for the older firmware so you need to downgrade the device. (it’s much easier than it sounds.)
2.1 Download the original firmware for MDZ-16-AA from this link: (both are the same thing)
yadi dot sk/d/Yvr1jYflm6GZR androidfilehost dot com/?fid=745425885120695554 2.2 Extract the contents of the downloaded zip file to a formatted usb tick (Fat32). (There should be two files: xiaomi_update and update.zip)
2.3 Put the USB flash drive in your Mi Box and boot in recovery
(How to boot into recovery: Unplug power > press and "hold back + ok" button while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. for some devices its "home + menu" button instead of the previous one.
2.4 the flashing should start and finish automatically. don’t connect the device to WIFI after this step until you have disabled the intelligent update.
(Credits to passerby on xiaomi.eu forums for the guide)
3. Rooting the device
I tried almost all of the rooting apps, none of them worked for me but I have seen people insisting that permroot works for them so I put the link for that, using it is pretty straight forward, download, install on device and try to root with it.
but in case that doesn’t work Kingoroot Windows app will definitely work. this is how to root with kingoroot. For this method you need a USB type A --> USB type A cable.
3.1 First download the kingoroot desktop app from their website
3.2 Install the app on your windows desktop
3.3 Go to your mibox device setting (mibox setting not android stock from part 1) and in Security setting and Enable USB/ADB debugging, device will restart for this setting to change.
3.4 connect your mibox to your desktop and wait for the device to be installed and recognized by windows. (If you are using windows 10 it will detect the device by itself)
3.5 Run the kingoroot app on the windows and let it detect the device, as soon as it detects the device root option will appear, click on root option it and wait
3.6 Kingoroot will try to install an app on your mibox, allow it and then this will continue and finish the rooting process.
3.7 Disable USB/ADB debugging, so you can connect USB Flash drives to the device again.
3.8 Check for the root stastus with rootchecker.
(Credits to passerby on xiaomi.eu forums for the guide)
4. How to flash TWRP to device
4.1 download the TWRP App from this link:
dl dot twrp dot me/twrpapp/me.twrp.twrpapp-18.apk 4.2 Download the android ROM and TWRP image together from this link:
goo dot gl/q5DGED password : Mibox2015 4.3 open the zip file and copy this image file to your USB Flash drive
MDZ-16-AA-AndroidTV-V1\TWRP-RECOVERY\twrp-mdz-16-aa.img
4.4 Connect the USB flash drive to the box and copy the image to device storage
4.3 Install the TWRP app on the device using the USB flash drive
4.4 Run it and select first two boxes.
4.5 Go to flash TWRP option and wait for app to ask permission from SU, grant permission.
4.6 Select TWRP flash and select flash from image. Select the image that you copied to device storage.
4.7 Boot into recovery (by this time you have root access and it’s better to boot to recovery with one of the reboot apps ex. Quick Reboot)
(Now you have TWRP, but the problem is every time you reboot the box, the stock rom overwrites the TWRP files and it goes back to Default recovery, to solve this we need to replace the Rom itself too)
5. Replacing the Rom
5.1 While still in TWRP page, make a small boot backup just so TWRP makes a folder in storage of your device.
5.2 Reboot the device from TWRP (reboot system)
5.3 Now using a File manager (I used X-plore) copy the Rom folder to the same backup folder that was created by TWRP in your storage.
Copy This folder:
MDZ-16-AA-AndroidTV-V1\TWRP\BACKUPS\11608V180037788\2014-12-31--18-01-42_6.9.7.949
To this folder: (Which is already should be there created by TWRP)
Internal Storage\TWRP\Backups\ (your device’s Serial number)\
5.4 Repeat steps 4.6 & 4.7 again to Flash TWRP again, after booting to TWRP go to restore and select file (2014-12-31--18-01-) to restore, swipe to restore and wait for 10-15 minutes
5.5 After restore is done don’t reboot, go back to TWRP main page, go to Wipe then advanced wipe, select Dalvik, Cache and Data to be wiped. After wipe is done reboot system
5.6 When android system boot is complete, go to setting down below and change the language to English and its done.
I hope it helps
Someone posted a tutorial on YouTube, the title of video is "MIBOX 3 MDZ-16-aa ROOT + Install Android TV English".
@[email protected], did you get Netflix to work on it?
dummyaccount said:
Someone posted a tutorial on YouTube, the title of video is "MIBOX 3 MDZ-16-aa ROOT + Install Android TV English".
@[email protected], did you get Netflix to work on it?
Click to expand...
Click to collapse
I tried all the steps.
No google play videos, no voice search and most of all no netflix.
=(
I hate the ****ing Chinese that sold me MDZ-16-aa saying it was the international version.
dont work password androidtv rom....... is Mibox2015?
mdz 16-AA
I faced the same issue.Wrong password.
Thanx for your post [email protected] I am going to use this method for my Mi box3.
As I am going to root any device for the first time, what precautions should I take
that I don't brick it?
Does the Microphone and and Ok button on Remote work normally after rooting by your method ?
Thx in advance....
[email protected] said:
Hi everyone, I recently bought a Xiaomi Mi box3c and was very disappointed with custom rom and the interface that it came with on it. So surfing the web there are a few tutorials on how to change it and I tried a few but they are not that great either, till finally someone patched the stock android TV Lean back Launcher for it, it took some tinkering but I got it working, this may not be the best way but this is how I did it form the start. This is not my work, I just followed instructions and I have gathered them here. As I am lazy Im not gonna provide pictures for every step but it’s pretty straight forward.
For using some the apps during the process you will need usb mouse cause not every apps supports Mibox remote configuration
As I am a new poster I am not allowed to post any links so change every dot word to an actual . for the links.
1. Turning on the Box and Changing to English
1.1 Download this apk provided by Xiaomi veterans on forum, it’s a shortcut to the stock android setting
drive dot google dot com/open?id=0B16bkj0QSkYnc0k2UUFTU05vSHM 1.2 copy the apk to a normal usb flash drive and connect to mibox and install the apk
1.3 Run it and now you can change the language as in any android device.
2. Downgrading Firmware
All of the root options available for this device are for the older firmware so you need to downgrade the device. (it’s much easier than it sounds.)
2.1 Download the original firmware for MDZ-16-AA from this link: (both are the same thing)
yadi dot sk/d/Yvr1jYflm6GZR androidfilehost dot com/?fid=745425885120695554 2.2 Extract the contents of the downloaded zip file to a formatted usb tick (Fat32). (There should be two files: xiaomi_update and update.zip)
2.3 Put the USB flash drive in your Mi Box and boot in recovery
(How to boot into recovery: Unplug power > press and "hold back + ok" button while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. for some devices its "home + menu" button instead of the previous one.
2.4 the flashing should start and finish automatically. don’t connect the device to WIFI after this step until you have disabled the intelligent update.
(Credits to passerby on xiaomi.eu forums for the guide)
3. Rooting the device
I tried almost all of the rooting apps, none of them worked for me but I have seen people insisting that permroot works for them so I put the link for that, using it is pretty straight forward, download, install on device and try to root with it.
but in case that doesn’t work Kingoroot Windows app will definitely work. this is how to root with kingoroot. For this method you need a USB type A --> USB type A cable.
3.1 First download the kingoroot desktop app from their website
3.2 Install the app on your windows desktop
3.3 Go to your mibox device setting (mibox setting not android stock from part 1) and in Security setting and Enable USB/ADB debugging, device will restart for this setting to change.
3.4 connect your mibox to your desktop and wait for the device to be installed and recognized by windows. (If you are using windows 10 it will detect the device by itself)
3.5 Run the kingoroot app on the windows and let it detect the device, as soon as it detects the device root option will appear, click on root option it and wait
3.6 Kingoroot will try to install an app on your mibox, allow it and then this will continue and finish the rooting process.
3.7 Disable USB/ADB debugging, so you can connect USB Flash drives to the device again.
3.8 Check for the root stastus with rootchecker.
(Credits to passerby on xiaomi.eu forums for the guide)
4. How to flash TWRP to device
4.1 download the TWRP App from this link:
dl dot twrp dot me/twrpapp/me.twrp.twrpapp-18.apk 4.2 Download the android ROM and TWRP image together from this link:
goo dot gl/q5DGED password : Mibox2015 4.3 open the zip file and copy this image file to your USB Flash drive
MDZ-16-AA-AndroidTV-V1\TWRP-RECOVERY\twrp-mdz-16-aa.img
4.4 Connect the USB flash drive to the box and copy the image to device storage
4.3 Install the TWRP app on the device using the USB flash drive
4.4 Run it and select first two boxes.
4.5 Go to flash TWRP option and wait for app to ask permission from SU, grant permission.
4.6 Select TWRP flash and select flash from image. Select the image that you copied to device storage.
4.7 Boot into recovery (by this time you have root access and it’s better to boot to recovery with one of the reboot apps ex. Quick Reboot)
(Now you have TWRP, but the problem is every time you reboot the box, the stock rom overwrites the TWRP files and it goes back to Default recovery, to solve this we need to replace the Rom itself too)
5. Replacing the Rom
5.1 While still in TWRP page, make a small boot backup just so TWRP makes a folder in storage of your device.
5.2 Reboot the device from TWRP (reboot system)
5.3 Now using a File manager (I used X-plore) copy the Rom folder to the same backup folder that was created by TWRP in your storage.
Copy This folder:
MDZ-16-AA-AndroidTV-V1\TWRP\BACKUPS\11608V180037788\2014-12-31--18-01-42_6.9.7.949
To this folder: (Which is already should be there created by TWRP)
Internal Storage\TWRP\Backups\ (your device’s Serial number)\
5.4 Repeat steps 4.6 & 4.7 again to Flash TWRP again, after booting to TWRP go to restore and select file (2014-12-31--18-01-) to restore, swipe to restore and wait for 10-15 minutes
5.5 After restore is done don’t reboot, go back to TWRP main page, go to Wipe then advanced wipe, select Dalvik, Cache and Data to be wiped. After wipe is done reboot system
5.6 When android system boot is complete, go to setting down below and change the language to English and its done.
I hope it helps
Click to expand...
Click to collapse
I tried to downgrade my MDZ-16-AA device with the MiBOX3_jurassicpark_gitv_1.3.106.386 file ... but it brings it down only to 1. 3. 114 and not to 1. 3. 106.
Secondly I do not get "ADB Debugging" option. Hence I cannot connect my Mi Box to my laptop.
Can anyone help ?
the correct password is : '@'mibox2015
the quotes are only to avoid mention to xda user "mibo" in xda forum...u don't have to write it in...
mibox v1.5.1
I've troubles to root my mibox, I've the 1.5.1 version.
Can you help me, please ?
Mi box 3C v 1.5.1
Can it possible to do the same for version 1.5.1?
I have Mi box 3C v 1.5.1 and I can't even boot into recovery yet.
Add widevine drm in MDZ-16-AA
To complete your notice, I found a way to launch MyCanal and molotov.tv (not tested for netflix yet).
As you know these apps requires widevine drm.
First download
extractor 4.0 and Xiomi 3S official rom
Then extract update.zip and add in root folder of extractor: system.new.dat + system.transfert.list.file_context
Use Extractor.bat to uncompact system.new
On folder go on system\vendor and copy paste lib folder on USB key.
Does anybody know how to go to recovery mode?
HOLD Back + OK and Home + Option doesn't work for my MDZ-16-AA
the system has been automatically updated yesterday.. :crying:
Thank you so much, I got it installed.
Step 1 can be hard because of the chinese language therefor I used this link:
https://www dot cnx-software dot com/2016/04/12/how-to-change-language-to-english-and-install-apps-remotely-on-xiaomi-mi-box-3-enhanced/
at step 2 I made the mistake that I extracted the update.zip aswell. while I needed to keep it zipped.
I used the app RUFUS to make the usbdrive a FAT32 drive.
at step 3 Kingoroot worked for me, although I needed to restart several times to make the ADB debugging connection work.
at step 4 sending the TWRP files, was a bit of a hurdle. It wwas not possible for me to copt them from the USB stick with ES file manager to the device. I needed to use the USB cable to my computer (ADB off) password: "@mibox2015"
At point 5 I was not able to use my remote or keyboard, I needed to turn off ADB!
At the end allot works, but there is still some bugs:
- MIUI still present. eg. when connecting an usb stick you get a chinese menu. and you are able to get into the old system menu
- unable to get NETFLIX to work
- allot of bloatware, apps I can not disable or delete.
- im unable to disable search by microphone in the UI, which is not supported by the remote of the 16-AA
- im unable to edit the tiles in the homescreen to eg. hide the supersu, market etc. and to put PLEX of KODI more in front
Thanks!!!!
I have rooted my mibox 3c and installed TWRP app
I copied img to device and flash drive, but I can't choose any img in TWRP app...
any method to replace custom recovery?? THX
weiabroad said:
I have rooted my mibox 3c and installed TWRP app
I copied img to device and flash drive, but I can't choose any img in TWRP app...
any method to replace custom recovery?? THX
Click to expand...
Click to collapse
Go through each step carefully, if stuck be clear about what you have done
Sent from my A0001 using Tapatalk
Arquivo converter ROM chinesa para global 3C-16AA
Olá, gostaria dos arquivos para converter a ROM 3C-16AA, você tem whats para contato?
Hey,
Im' trying to get mycanal to work on my mibox MDZ-16-AA.
I copied the lib folder on my usb stick.
it's still not working, isn't any steps missing ?
Thanks.
Secure Check failed error while downgrading
I Got "secure check failed." error while downgrading. What did i do wrong ?
[email protected] said:
Hi everyone, I recently bought a Xiaomi Mi box3c and was very disappointed with custom rom and the interface that it came with on it. So surfing the web there are a few tutorials on how to change it and I tried a few but they are not that great either, till finally someone patched the stock android TV Lean back Launcher for it, it took some tinkering but I got it working, this may not be the best way but this is how I did it form the start. This is not my work, I just followed instructions and I have gathered them here. As I am lazy Im not gonna provide pictures for every step but it’s pretty straight forward.
For using some the apps during the process you will need usb mouse cause not every apps supports Mibox remote configuration
As I am a new poster I am not allowed to post any links so change every dot word to an actual . for the links.
1. Turning on the Box and Changing to English
1.1 Download this apk provided by Xiaomi veterans on forum, it’s a shortcut to the stock android setting
drive dot google dot com/open?id=0B16bkj0QSkYnc0k2UUFTU05vSHM 1.2 copy the apk to a normal usb flash drive and connect to mibox and install the apk
1.3 Run it and now you can change the language as in any android device.
2. Downgrading Firmware
All of the root options available for this device are for the older firmware so you need to downgrade the device. (it’s much easier than it sounds.)
2.1 Download the original firmware for MDZ-16-AA from this link: (both are the same thing)
yadi dot sk/d/Yvr1jYflm6GZR androidfilehost dot com/?fid=745425885120695554 2.2 Extract the contents of the downloaded zip file to a formatted usb tick (Fat32). (There should be two files: xiaomi_update and update.zip)
2.3 Put the USB flash drive in your Mi Box and boot in recovery
(How to boot into recovery: Unplug power > press and "hold back + ok" button while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. for some devices its "home + menu" button instead of the previous one.
2.4 the flashing should start and finish automatically. don’t connect the device to WIFI after this step until you have disabled the intelligent update.
(Credits to passerby on xiaomi.eu forums for the guide)
3. Rooting the device
I tried almost all of the rooting apps, none of them worked for me but I have seen people insisting that permroot works for them so I put the link for that, using it is pretty straight forward, download, install on device and try to root with it.
but in case that doesn’t work Kingoroot Windows app will definitely work. this is how to root with kingoroot. For this method you need a USB type A --> USB type A cable.
3.1 First download the kingoroot desktop app from their website
3.2 Install the app on your windows desktop
3.3 Go to your mibox device setting (mibox setting not android stock from part 1) and in Security setting and Enable USB/ADB debugging, device will restart for this setting to change.
3.4 connect your mibox to your desktop and wait for the device to be installed and recognized by windows. (If you are using windows 10 it will detect the device by itself)
3.5 Run the kingoroot app on the windows and let it detect the device, as soon as it detects the device root option will appear, click on root option it and wait
3.6 Kingoroot will try to install an app on your mibox, allow it and then this will continue and finish the rooting process.
3.7 Disable USB/ADB debugging, so you can connect USB Flash drives to the device again.
3.8 Check for the root stastus with rootchecker.
(Credits to passerby on xiaomi.eu forums for the guide)
4. How to flash TWRP to device
4.1 download the TWRP App from this link:
dl dot twrp dot me/twrpapp/me.twrp.twrpapp-18.apk 4.2 Download the android ROM and TWRP image together from this link:
goo dot gl/q5DGED password : Mibox2015 4.3 open the zip file and copy this image file to your USB Flash drive
MDZ-16-AA-AndroidTV-V1\TWRP-RECOVERY\twrp-mdz-16-aa.img
4.4 Connect the USB flash drive to the box and copy the image to device storage
4.3 Install the TWRP app on the device using the USB flash drive
4.4 Run it and select first two boxes.
4.5 Go to flash TWRP option and wait for app to ask permission from SU, grant permission.
4.6 Select TWRP flash and select flash from image. Select the image that you copied to device storage.
4.7 Boot into recovery (by this time you have root access and it’s better to boot to recovery with one of the reboot apps ex. Quick Reboot)
(Now you have TWRP, but the problem is every time you reboot the box, the stock rom overwrites the TWRP files and it goes back to Default recovery, to solve this we need to replace the Rom itself too)
5. Replacing the Rom
5.1 While still in TWRP page, make a small boot backup just so TWRP makes a folder in storage of your device.
5.2 Reboot the device from TWRP (reboot system)
5.3 Now using a File manager (I used X-plore) copy the Rom folder to the same backup folder that was created by TWRP in your storage.
Copy This folder:
MDZ-16-AA-AndroidTV-V1\TWRP\BACKUPS\11608V180037788\2014-12-31--18-01-42_6.9.7.949
To this folder: (Which is already should be there created by TWRP)
Internal Storage\TWRP\Backups\ (your device’s Serial number)\
5.4 Repeat steps 4.6 & 4.7 again to Flash TWRP again, after booting to TWRP go to restore and select file (2014-12-31--18-01-) to restore, swipe to restore and wait for 10-15 minutes
5.5 After restore is done don’t reboot, go back to TWRP main page, go to Wipe then advanced wipe, select Dalvik, Cache and Data to be wiped. After wipe is done reboot system
5.6 When android system boot is complete, go to setting down below and change the language to English and its done.
I hope it helps
Click to expand...
Click to collapse
I successfully rooted my mibox 3c (MDZ-16-AA) and installed TWRP app and Android TV.
Now I want to go back to the Xiaomi Original Firmware (1.5.25). I tried to use TWRP and the Update.zip, but it did not work. How can I do it? Many thanks!
---------- Post added at 09:59 AM ---------- Previous post was at 09:53 AM ----------
I read from a Chinese forum that the 1.4.32 can also be rooted. As far as I know the Android TV is based on the 1.3.106. Does it make any sense to root the MDZ-16-AA with the firmware 1.4.32 and install the Android TV then?
How I can install twrp and flash gsi rom on Doogee N20?
I found this but I'm doesnt know Russian: pda.ru/forum/index.php?showtopic=955032&st=1220#entry89836105 (I cant post URL because I'm new user, so I delete the "4" from "4pda")
Sorry for my bad English.
צבי זלצברג said:
How I can install twrp and flash gsi rom on Doogee N20?
I found this but I'm doesnt know Russian: pda.ru/forum/index.php?showtopic=955032&st=1220#entry89836105 (I cant post URL because I'm new user, so I delete the "4" from "4pda")
Click to expand...
Click to collapse
That's the Google translation:
A little instruction on how to get RooT. And so, everything that you do, as always, is at your own peril and risk! All data is erased when unlocked! Make BACKUP !!! Is always!!!! I. Unlocking Boorloder-a (required for flashing the phone and everything connected with it): 1. Go to settings -> system -> About phone -> Build number (7 clicks) (Congratulations !!!! You are a developer!) < - About phone -> For developers: Enable USB debugging and OEM unlocking. 2. We connect the phone to the computer and install the ADB usb driver (on the Internet), a connection request should appear on the phone, you need to allow it. 3. Extract files from the N20_utils.rar archive (10.87 MB) (preferably not very far, the root of the disk or the created folder N20 will be there). Go to the Unlocked Bootloader folder and run the bat file, the phone will reboot and display the request "unlock? Yes / no" rocker up - yes / rocker down - no. Naturally, you need to press the volume up, otherwise there were so many actions)) 4. Congratulations! Now, with each reboot, you will have an Orange state (5-second inscription), and the ability to do whatever you want with your phone. II. We sew! 1. For the lazy (who value their time). Download the SP Flash tool (Internet), from the N20_utils.rar archive (10.87 MB) select MT6763_Android_scatter and boot_magisk_20 files for the boot partition, lk_pached for lk, etc. you can even twrp instead of native recovery. Turn off the phone, connect it to the computer and click Download in the SP Flash programs. After the OK circle appears, disconnect and reconnect the cable (easier than a forced reboot). We turn on the phone and put the magisk manager (internet). Congratulations!!! You have a root and no Orange State label! 2. Who wants more and himself: phone to computer -> go to the Unlocked Bootloader folder -> run CMD -> write "fastboot flash recovery" put a space and move the TWRP file with the mouse to the window (fast path to the file) and press ENTER -> reboot the phone to fastboot. Congratulations!!! you have TWRP. Boot into TWRP, skip the encrypted DATE message, go to formatting and format the DATE. Go to mount and connect MTP. A phone will appear on my computer, we drop the files DisableForceEncryption_Treble (disable date encryption), orange_state_disabler_v0.3 (remove orange_state) and magisk.zip (internet) into the memory section. In TWRP, click install all this and rejoice! 3. Who has nothing to do at all: go to the forum thread Development and porting of GSI firmware (Post bullik01 # 71222655) and try what catches your eye. Not all are loaded, but .... (although we do not seem to have an A / B structure, but only "arm64 A / B" were launched) PS: look for additional information here on the forum and for brotherly devices UMiDIGI A5 Pro - Firmware ( Post Xakep1993 # 86772223) Attached files recovery-TWRP_3.3-20191015-1714.img (22.81 MB) DisableForceEncryption_Treble.zip (4.24 MB)
jwoegerbauer said:
That's the Google translation:
A little instruction on how to get RooT. And so, everything that you do, as always, is at your own peril and risk! All data is erased when unlocked! Make BACKUP !!! Is always!!!! I. Unlocking Boorloder-a (required for flashing the phone and everything connected with it): 1. Go to settings -> system -> About phone -> Build number (7 clicks) (Congratulations !!!! You are a developer!) < - About phone -> For developers: Enable USB debugging and OEM unlocking. 2. We connect the phone to the computer and install the ADB usb driver (on the Internet), a connection request should appear on the phone, you need to allow it. 3. Extract files from the N20_utils.rar archive (10.87 MB) (preferably not very far, the root of the disk or the created folder N20 will be there). Go to the Unlocked Bootloader folder and run the bat file, the phone will reboot and display the request "unlock? Yes / no" rocker up - yes / rocker down - no. Naturally, you need to press the volume up, otherwise there were so many actions)) 4. Congratulations! Now, with each reboot, you will have an Orange state (5-second inscription), and the ability to do whatever you want with your phone. II. We sew! 1. For the lazy (who value their time). Download the SP Flash tool (Internet), from the N20_utils.rar archive (10.87 MB) select MT6763_Android_scatter and boot_magisk_20 files for the boot partition, lk_pached for lk, etc. you can even twrp instead of native recovery. Turn off the phone, connect it to the computer and click Download in the SP Flash programs. After the OK circle appears, disconnect and reconnect the cable (easier than a forced reboot). We turn on the phone and put the magisk manager (internet). Congratulations!!! You have a root and no Orange State label! 2. Who wants more and himself: phone to computer -> go to the Unlocked Bootloader folder -> run CMD -> write "fastboot flash recovery" put a space and move the TWRP file with the mouse to the window (fast path to the file) and press ENTER -> reboot the phone to fastboot. Congratulations!!! you have TWRP. Boot into TWRP, skip the encrypted DATE message, go to formatting and format the DATE. Go to mount and connect MTP. A phone will appear on my computer, we drop the files DisableForceEncryption_Treble (disable date encryption), orange_state_disabler_v0.3 (remove orange_state) and magisk.zip (internet) into the memory section. In TWRP, click install all this and rejoice! 3. Who has nothing to do at all: go to the forum thread Development and porting of GSI firmware (Post bullik01 # 71222655) and try what catches your eye. Not all are loaded, but .... (although we do not seem to have an A / B structure, but only "arm64 A / B" were launched) PS: look for additional information here on the forum and for brotherly devices UMiDIGI A5 Pro - Firmware ( Post Xakep1993 # 86772223) Attached files recovery-TWRP_3.3-20191015-1714.img (22.81 MB) DisableForceEncryption_Treble.zip (4.24 MB)
Click to expand...
Click to collapse
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Good day
Had the same problem, (English not so good but I know you'll understand). What I did was just installing Corvus OS rom, the 11th version. It's been quite a while since i installed it.
Tried Lineage 18.1 and adding the smallest gapps available, but everytime i get code error 1. I guess it was the twrp 3.3 version i used cause some roms requer the latest TWRP versions. The lineage is installing just right nd can reboot to system with no hiccups.
None of Android 12 gsi versions has ever been able to installed. Cause when i try to install, i get the error of "file too large for the target partition. Tried everything from the net to increase the system partition to at-least 3gig. No success.....
Is anyone who can help to install android 12 even beta version will be ok for my N20 Doogee??
Thanx
flairepathos.info said:
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Click to expand...
Click to collapse
The file is in the forum. But to make your life easier here are the link.
https://drive.google.com/drive/folders/18B-srDVia_H4aDt7uvCDUxg2e4R5kVVY?usp=sharing The file is of type .exe and that extracts when you run on the pc, the problem is that I was suspicious about the virus so I threw the file in the total virus (if you don't know what it is, just search) and 6 programs pointed it out as malware but many others didn't find anything including karpersky and bit defender, there to make sure the files were there i renown they from .exe to .zip and I looked and the files really were there but as I don't want to take the risk I didn't extract and I didn't even try anything. The file that fix the encryption are inside doogee n20.exe, the guy said it will be in .exe and when you run it extracts the file in the C folder of the computer I recommend you to rename it from .exe to .zip because if the file have a virus you can screw your pc when running
Da-Judges said:
Good day
Had the same problem, (English not so good but I know you'll understand). What I did was just installing Corvus OS rom, the 11th version. It's been quite a while since i installed it.
Tried Lineage 18.1 and adding the smallest gapps available, but everytime i get code error 1. I guess it was the twrp 3.3 version i used cause some roms requer the latest TWRP versions. The lineage is installing just right nd can reboot to system with no hiccups.
None of Android 12 gsi versions has ever been able to installed. Cause when i try to install, i get the error of "file too large for the target partition. Tried everything from the net to increase the system partition to at-least 3gig. No success.....
Is anyone who can help to install android 12 even beta version will be ok for my N20 Doogee??
Thanx
Click to expand...
Click to collapse
you can use the pixel experience lite https://github.com/ponces/treble_build_pe/releases ( remenber the lite version, because is 2,5 gig) i try and instal in my phone and worked but i cant access my storage so i search and here are the solution https://forum.xda-developers.com/t/...loop-after-any-custom-rom-doogee-n20.4357313/ i dont try it but if you want here are the solution
flairepathos.info said:
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Click to expand...
Click to collapse
Hi, did you find N20_utils?