So I purchase the app yesterday and so far is working great is a good concept for those that like ASOP roms but dont want to give up the 3D feature...
How does it work?
gflam said:
If i told you that i'd have to kill you...
Nah it basically just makes imgs on your sdcard and creates file systems on it then the rom is extracted to the imgs and the boot.img of the rom is edited to tell what to mount. That's the basic idea but it's obviously a lot more complicated then that.
Click to expand...
Click to collapse
My two questions are:
Who is using it?
What roms are you running?
My personal setup:
Phone Rom: Miui 2.1.6
Slot 1: Olympus Deodex
Slot 2: Supra Rom 2.2
Slot 3:
Slot 4:
Now Thanks to this great app I need a bigger sdcard. 16gb not enough anymore..
https://market.android.com/details?id=com.drx2.bootmanager&hl=en
Current Version..
What's in this version:
V3.2
Changed 4 sd slots to infinite slots!
Galaxy Nexus Support
License Check extended to a week
ROMs do not need market installed for boot manager to run (requires updating boot manager in all slots)
Hide su toasts (superuser elite only)
Fix for force close when setting screen shot in MIUI rom's
Thunderbolt defaulted to force large boot.img
Fixed unsupported device using a key
Sms and Call Log synced between ROMs (you choose what ones too also requries updating boot manager in all slots)
I'm using it ha my evo 3d has this setup
Phone ROM: MIUI
Slot 1: Cyanogenmod
Slot 2: Infected Eternity ROM (Daily driver)
Thanks for the download glad you're enjoying the app
One of the few apps I've purchased. Working great.
Phone:ICS alpha 7 (kush's)
Slot 1: fresh
Slot 2: miui
Slot 3: Warm three point two
Sent from my PG86100 using XDA App
Phone Rom: Clean Rom 3.0 with ICS Spark theme
Slot 1: ICS Port by Joelz
I put this app up there with other must haves like Rom Manager, Root Explorer, and wireless Tether.
PhoneRom: FreEVO
Slot1: ICS port from Joel Z
Slot2: SenselessROM
Slot3: MIUI
Slot4: ICS port from kushdeck
Well very glad you guys all like the app we've worked hard on it been working on another app for the past two months hoping to have it out next week
If you like boot manager please rate and comment in the market it would be much appreciated
Just wondering if I can use this app after rooting with the HTC method for 1.5? Sure hope so, it sounds pretty sweet!
Sent from my PG86100 using xda premium
Will boot manager work well with a class 4 sd card?
ssjgoku24 said:
One of the few apps I've purchased. Working great.
Phone:ICS alpha 7 (kush's)
Slot 1: fresh
Slot 2: miui
Slot 3: Warm three point two
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
How did you get
Warm two pint two wirking i traid but i get a error creating the boot image??
gflam said:
Well very glad you guys all like the app we've worked hard on it been working on another app for the past two months hoping to have it out next week
If you like boot manager please rate and comment in the market it would be much appreciated
Click to expand...
Click to collapse
honestly you guys are doing a great job but I got a question why when i try to change the rom display picture it force close also i try installing warm two pint tree and get a error with the boot image
bagelicious said:
Just wondering if I can use this app after rooting with the HTC method for 1.5? Sure hope so, it sounds pretty sweet!
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I think you need S-off someone correct me if im wrong!!!
Sent from my HTC EVO 3D using Tapatalk
DarkManX4lf said:
Will boot manager work well with a class 4 sd card?
Click to expand...
Click to collapse
I'm using the stock class 4 card & it works well
Phone ROM: ViperROM
Slot 1: Deck's ICS
Slot 2: freEVO
Shooter McGavin
1107963 said:
How did you get
honestly you guys are doing a great job but I got a question why when i try to change the rom display picture it force close also i try installing warm two pint tree and get a error with the boot image
Click to expand...
Click to collapse
Gonna say you're using miui when you go to switch the image we've already found that miui gallery handles things different/weirdly it's been fixed for a while now and is in the next update we've just been wrapped up in this other app we're working on. We plan to release next week and then we'll be working on a tool box for Sourcery ROM which is coming soon to the gnex and i originally did with eagle1967 on the droid1. Anyway hopefully we'll have the fix out for miui gallery very soon just been really busy for now just boot to another rom that isn't miui and change the image there.
Also let me know if it's not miui gallery although i'd be surprised if it wasn't
=========================
As for the class 4 card i only run sd roms lately and i'm using a class 2 card and heck if i can run one of these roms on a class 2 card and not complain about speed you should be golden on a class 4 the only thing that matters is finding your sd booster speed once found you should be able to run smoothly on any card
Ok so bootmanager and the roms have been working well on my 32gb class 4 card, but I ran into an issue. I have
Phone Rom: CleanRom 3.0 Preview 1
Rom 1: MIUI (latest version since this post)
Rom 2: decks ICS 1-6-07
When I boot into Decks ICS, I cannot boot back into another rom with BootManager it just keeps saying "Unfortunately, Boot Manager has stopped".....How do I boot back into the phone rom ?
DarkManX4lf said:
Ok so bootmanager and the roms have been working well on my 32gb class 4 card, but I ran into an issue. I have
Phone Rom: CleanRom 3.0 Preview 1
Rom 1: MIUI (latest version since this post)
Rom 2: decks ICS 1-6-07
When I boot into Decks ICS, I cannot boot back into another rom with RomManager it just keeps saying "Unfortunately, Boot Manager has stopped".....How do I boot back into the phone rom ?
Click to expand...
Click to collapse
Use boot manager to boot between Roms not rommanager
Sent from my PG86100 using XDA App
flintman said:
Use boot manager to boot between Roms not rommanager
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Sorry thats what I meant to say, I am using BootManager to boot between roms. I am currently in Decks ICS rom and trying to boot into the phone rom with BootManager and it give me the error....i'll fix my original post.
DarkManX4lf said:
Sorry thats what I meant to say, I am using BootManager to boot between roms. I am currently in Decks ICS rom and trying to boot into the phone rom with BootManager and it give me the error....i'll fix my original post.
Click to expand...
Click to collapse
the developer show a way to go back using recovery
Sent from my HTC EVO 3D using Tapatalk
DarkManX4lf said:
Sorry thats what I meant to say, I am using BootManager to boot between roms. I am currently in Decks ICS rom and trying to boot into the phone rom with BootManager and it give me the error....i'll fix my original post.
Click to expand...
Click to collapse
Use to happen to me, not anymore though. When it did, I would just reinstall it, problem solved.
My setup:
PhoneRom: CleanROM DE 2.0
Slot 1: Cyanogen 7.1
Slot 2:Evervolv ICS p6
Slot 3:Mikrunny 1.02 (Has not booted, something wrong with sense 3.5?)
Slot 4: CleanROM De 1.3, from awhile ago, haven't chosen what to replace it with
1107963 said:
the developer show a way to go back using recovery
Sent from my HTC EVO 3D using Tapatalk
Click to expand...
Click to collapse
Where did you see this?
DarkManX4lf said:
Where did you see this?
Click to expand...
Click to collapse
in the market video like at the end of the video he show you how to go back to the phone rom if boot manager doesnt do it for you...
Sent from my HTC EVO 3D using Tapatalk
DarkManX4lf said:
Where did you see this?
Click to expand...
Click to collapse
Just go into recovery, install zip, go to boot manager folder, choose phone ROM, then flash the .zip inside it
Shooter McGavin
piscesjoey said:
Just go into recovery, install zip, go to boot manager folder, choose phone ROM, then flash the .zip inside it
Shooter McGavin
Click to expand...
Click to collapse
Yes exactly please read the manual or at least watch the tutorial video it'll save everyone time ha but anyway yea uninstall and reinstall the app in that slot that should fix that
Related
This is my attempt at a ROM for the Amaze. I never claim to be a Devloper. I am learning as i go. If the devs have some advise hit me up.
It is for unlocked boot loader and you have to have CWM/TWRP recovery installed.
this my personal ROM and i dont use all this stuff so i removed it just sharing with you guys/gals
Introducing
EyesofCrack V2.5.1
Disclaimer
As with all ROMS I am not responsible if you break, brick, blow up, melt or anything else that may happen to your phone
Features - Based on HTC TMO 1.36.351.6 Thanks xboarder56 for the base of QuickSense
Senseless 2.3.4
Still has some of the sense framwork so the Sense contact, and dialer still work
Improved Music Sound (Beats audio Hack)
Rooted
BusyBox
Improved battery life
Improved Ram
Debloated
Fast
Init.d Support
Zip Alligned on boot
Sdcard tweaks
Adfree base
Speed & RAM Scripts
288mb
nano
Custom boot animation support
Stock Htc boot animation
Sense 3.0/Sense 3.5
Multi Laungue
Yes alot of these are the same as xboarder56 quicksense that because it was the base of my ROM
To install
boot into recovery
full wipe is required
chose install from SD card
pick the EOCR251.zip and wait till its done
reboot and enjoy
Code:
[B]Change Log[/B]
11/3
fixed contact crash
updated adfree host file
Changed to Zeam Launcher (smaller footprint)
removed OTA check in files (so the phone does not go and check for updates all the time)
removed even more sense items to lower the total size down to 193MB
some smaller stuff i cant remember again
10/31
Updated base OS to 1.36
added multilingual
WIFI calling working (make sure you set everything up on your account)
removed more bloat
added a adfree host file
Beat audio hack
updated to Superuser 3.0.5
updated market to 3.20
updated maps to 5.11
updated street view to 1.7 something
apps to data for easy removal
updated gps fix (thanks crypted)
max tabs in browser up to 10
build.prop tweaks (thanks Mike1986 for the ideas off your roms)
10/24
first release
You can use UOT kitchen to change the theme on it
Special thanks
Xboarder for his scripts to allow it to install and for CWM and his base quicksense and help with fixing the contact issue
Mike1986 and Melvin for their great ROMS that I use their ideas on my ROMS
*Patrics83* | Dude360 | craacK for the ROM cleaner script that I aquired some locations of items to remove
Rest of the great devs on this great XDA site.
Plesae hang with me this is my first attempt and I know I have made mistakes. Suggestions would be greatly appreciated, and i will see what i can do to impliment them
Download
HERE 2.5.1
193 MB
MD5: 8fcfa74ac5d083d5068ae48f85459516
SHA-1: afd7539e5f87ce38b5b05e4b250fc9c4a5aa6e9b
As always please thank or donate if you like and would like to help support
Suggestions are always welcome
Enjoy
reserve
for updates and such
another just in case
you i need it and such
nice job man
Great job man , installing now & will post a review tommorrow .
Uhh i see my name i see my name :-D:-D:-D:-D
Sent from my SGH-T989 using xda premium
crackeyes - will try this later today. i especially would like to see how a streamlined ROM with some tweaks would run and if it would improve battery llife. I am getting less then 1/2 the life of OC'd G2X at 1500 on CM7 and Miui plus stock is slower then hell.
Question - just how did you get s=off? I went the boot loader/perm root path, and have not seen an s=off thread.
gaww said:
crackeyes - will try this later today. i especially would like to see how a streamlined ROM with some tweaks would run and if it would improve battery llife. I am getting less then 1/2 the life of OC'd G2X at 1500 on CM7 and Miui plus stock is slower then hell.
Question - just how did you get s=off? I went the boot loader/perm root path, and have not seen an s=off thread.
Click to expand...
Click to collapse
Mine came s off I know I'm lucky
Sent from my HTC_Amaze_4G using XDA App
crackeyes said:
Mine came s off I know I'm lucky
Sent from my HTC_Amaze_4G using XDA App
Click to expand...
Click to collapse
You are right nest door in Knoxville - want to swap?
gaww said:
You are right nest door in Knoxville - want to swap?
Click to expand...
Click to collapse
Naw I'm good I'll keep it until the next best phone comes out
Sent from my HTC_Amaze_4G using XDA App
Nice first try, but by basing it on 1.35 it seems to have carried over the problems I had with 1.35 (the one posted not the one on my device). That was no WIFi, hot spot, Bluetooth work at all.
I found it is faster then the stock, and it looks like it has good potential. I am going to nandroid it and hopefully you will release a latter one that has these fixed.
Minor request - really liked an alternative lock screen layout on the stock ROM - anyway to bring these over?
gaww said:
Nice first try, but by basing it on 1.35 it seems to have carried over the problems I had with 1.35 (the one posted not the one on my device). That was no WIFi, hot spot, Bluetooth work at all.
I found it is faster then the stock, and it looks like it has good potential. I am going to nandroid it and hopefully you will release a latter one that has these fixed.
Minor request - really liked an alternative lock screen layout on the stock ROM - anyway to bring these over?
Click to expand...
Click to collapse
Weird My wifi works, my bluetooth works for music and calls and have not tried hotspot. Sounds like you may have a weird hardware issue. Im not saying my rom is perfect but it seems like every OM you try other than stock it is giving you these errors
As for the lockscreens I suggest Widget Locker it has many different themes for it and different lock styles. Its like 3 bucks
I will look into these issues and see if anyone else is having them
it might be due to another issue that has been brought up in another thread. it has been stated that possibly the boot.img are not flashing when a ROM is flashed and that the one on board remains. That could explain why I cannot get a 1.35's to work - I may still have the 1.36 bootimg on.
I asked the poster who said this lack of flashing could be the result of NOT having s=off (the required permissions are not there) but got no response. It had also been stated earlier that unlocked boot loader and perm root would not allow kernels to be flashed (the y are primarily a boot.img) - so this may support the s=off issues.
If this is the case, we need to get s=off, or maybe have ROMs including kernels packaged so they will flash as an update in hboot like Xboarder's earlier rescue ROM.
Lucky you - how did you get an s=off shipped anyway.
gaww said:
it might be due to another issue that has been brought up in another thread. it has been stated that possibly the boot.img are not flashing when a ROM is flashed and that the one on board remains. That could explain why I cannot get a 1.35's to work - I may still have the 1.36 bootimg on.
I asked the poster who said this lack of flashing could be the result of NOT having s=off (the required permissions are not there) but got no response. It had also been stated earlier that unlocked boot loader and perm root would not allow kernels to be flashed (the y are primarily a boot.img) - so this may support the s=off issues.
If this is the case, we need to get s=off, or maybe have ROMs including kernels packaged so they will flash as an update in hboot like Xboarder's earlier rescue ROM.
Lucky you - how did you get an s=off shipped anyway.
Click to expand...
Click to collapse
That is a good theroy and very understandable. as for the s-off it is luck of the draw i guess, I have had a sensation, and amaze with ship off
This rom runs pretty darn good except for the wifi issue. From reading the install procedure, did you actually make this to flash straight over the stock rom or are we supposed to wipe like usual before we install this? I wiped everything than installed and wifi doesn't work at all. I'm just curious as if this could be why.
Sent from my HTC_Amaze_4G using xda premium
epeets said:
This rom runs pretty darn good except for the wifi issue. From reading the install procedure, did you actually make this to flash straight over the stock rom or are we supposed to wipe like usual before we install this? I wiped everything than installed and wifi doesn't work at all. I'm just curious as if this could be why.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
I had same issues coming from 1.36. They are trying to figure it out in other thread.
Sent from my HTC_Amaze_4G using xda premium
epeets said:
This rom runs pretty darn good except for the wifi issue. From reading the install procedure, did you actually make this to flash straight over the stock rom or are we supposed to wipe like usual before we install this? I wiped everything than installed and wifi doesn't work at all. I'm just curious as if this could be why.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Thanks, and it seems to be the fact that you are not s-off it is stopping the boot.img to install and thats where all the kernals for the wifi and stuff is
Ya crack use my boot Ingram from my rom it will work and the wifi modules
Sent from my HTC_Amaze_4G using xda premium
New build up
there is a new version up
Nice job man
Sent from my HTC Amaze 4G using xda premium
Simplistic ROM
About Simpistic
Simpistic is a ROM that was designed to use the least RAM possible! Meaning that it's a clean, fast, stable and super lite ROM! With no bloatware.
ROM is De-Odexed and based on the newest ICS leak (3.10.605.13)
For flashing, please read the 2nd post! (It's important!)
Click to expand...
Click to collapse
Features
No VZW or HTC Bloatware!
Performance improvements
Based on 3.10.605.13
Superlite (425MB) and smooth
Sony Bravia Engine (Makes images look better)
Stock ICS Launcher, MMS, Lockscreen and Contacts
Zipaligned
Wifi Tether
Click to expand...
Click to collapse
Place PH98IMG.zip in your SDCard and flash it! Then flash the ROM.
Download
Newest Release Version: RC1.1 *Uploaded!*
http://www.androidfilehost.com/main/Rezound_Developers/blind37/
Click to expand...
Click to collapse
Thanks to all who helped
dsixda for the kitchen, joelZ9614 for his base, and for everyone else who helped!
Click to expand...
Click to collapse
I would be more than glad to help anyone with anything. Feel free to ask any question and I will get back to you as soon as possible!
If you like my work, please consider clicking the thanks button!
If you want more quality ROMs from me, please consider donating through PayPal as I am developing without owning the HTC Rezound
https://www.paypal.com/cgi-bin/webs...=PP-DonationsBF:btn_donateCC_LG.gif:NonHosted
The ROM is installed at your own risk, as I take no risk if your phone breaks, or even if dragons pop up from your phone and eat you xP.(But nothing bad should happen )
Flashing
You must flash PH98IMG.zip before you boot into the ROM (I prefer you flash the PH98IMG.zip before flashing the ROM, but it doesn't matter as long as you are going to flash it).
Click to expand...
Click to collapse
Installation
*Assuming you have flashed PH98IMG.zip already*
Put ROM on SD Card
Reboot into recovery
Wipe data/Factory reset(This is important!)
Flash ROM
Reboot
Enjoy!
Click to expand...
Click to collapse
Changelog
*RC1.1*
Removed Swype for now.
Removed more HTC Bloatware.
Other minor fixes.
Click to expand...
Click to collapse
*RC1*
-Initial ROM Release.
Click to expand...
Click to collapse
Reserved for later!
Is this a fully de-sensed rom except for what is needed to keep the phone runnin? Thanks!
I'm working on making it a completely pure ICS ROM (Meaning that it will be a De-Sensed ROM!)
zetsumeikuro said:
Is this a fully de-sensed rom except for what is needed to keep the phone runnin? Thanks!
Click to expand...
Click to collapse
Any.major bugs or broken features
Sent from my ADR6425LVW using xda premium
I am new at flashing roms on HTC.. so bear with this question if stupid. Any reason , I can't take out boot image out of PH98IMG and flash in bootloader then place rom on SD card and flash ?
Just trying to avoid Main ver issues in the future, plus I like to manually flash the kernels in fastboot . Seems to work out better for me .
Normally, I remove boot.img , flash rom.. reboot to bootloader then fastboot flash the boot.img and reboot phone.
It has worked great for me so far and I have avoided any main version issues so I can swap between ICS and GB if needed.
To my knowledge, there are no problems with the ROM, but if you found anything, please report back so I can fix it as soon as possible!
phillybizzle said:
Any.major bugs or broken features
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
mjh68 said:
I am new at flashing roms on HTC.. so bear with this question if stupid. Any reason , I can't take out boot image out of PH98IMG and flash in bootloader then place rom on SD card and flash ?
Just trying to avoid Main ver issues in the future, plus I like to manually flash the kernels in fastboot . Seems to work out better for me .
Normally, I remove boot.img , flash rom.. reboot to bootloader then fastboot flash the boot.img and reboot phone.
It has worked great for me so far and I have avoided any main version issues so I can swap between ICS and GB if needed.
Click to expand...
Click to collapse
There is no Boot.img in this ROM, that's why you need to flash the PH98IMG.zip
And yes, you can use Fastboot if you like to, it should be the same.
Screenshots Anyone?
Viper
Viper32 said:
Screenshots Anyone?
Viper
Click to expand...
Click to collapse
+1 I'd like to see some images before I try it out.
Deathbyfugu said:
+1 I'd like to see some images before I try it out.
Click to expand...
Click to collapse
As I said in the original post, I don't own the device, so I can't really provide any pictures. But it should almost be like a stock ICS ROM (Stock launcher, lockscreen, etc..) If you could provide me some screenshots that would be awesome
At work now, but I will be flashing this later. Report back what I find.
Sent from my ADR6425LVW using XDA App
To everyone, I wouldn't bother flashing until fixed. When the phone boots up after flashing this ROM, it constantly pops up that Swype has stopped working. It also asks for your country which you can't even select.
But with the Swype error, you can't type anything to set anything up. I went into settings and Swype was greyed out so I couldn't turn it off or activate any other keyboard.
I had to revert to my previous ROM because I couldn't do anything with this one. The ROM itself looks promising from what I saw, but it's not usable in its current state.
Hopefully it's fixed soon!
WizeGuyDezignz said:
To everyone, I wouldn't bother flashing until fixed. When the phone boots up after flashing this ROM, it constantly pops up that Swype has stopped working. It also asks for your country which you can't even select.
But with the Swype error, you can't type anything to set anything up. I went into settings and Swype was greyed out so I couldn't turn it off or activate any other keyboard.
I had to revert to my previous ROM because I couldn't do anything with this one. The ROM itself looks promising from what I saw, but it's not usable in its current state.
Hopefully it's fixed soon!
Click to expand...
Click to collapse
Wow, really? I will fix it in a bit and upload a new build.
See, that's why I need feedback from you guys
ms7p said:
Wow, really? I will fix it in a bit and upload a new build.
See, that's why I need feedback from you guys
Click to expand...
Click to collapse
Yes, sorry to report that. I even wiped and flashed again to make sure, and the same problems popped up.
The first thing it asks when you unlock the screen is to choose your country. There is a drop down box but when you click on it, there is nothing in there and it gives an error.
Then the Swype error pops up like very 5 seconds and you can't get any keyboard to pop up to type anything.
As I said, the ROM looks great though! I'm looking forward to the update and see how it runs! Thanks!!
WizeGuyDezignz said:
Yes, sorry to report that. I even wiped and flashed again to make sure, and the same problems popped up.
The first thing it asks when you unlock the screen is to choose your country. There is a drop down box but when you click on it, there is nothing in there and it gives an error.
Then the Swype error pops up like very 5 seconds and you can't get any keyboard to pop up to type anything.
As I said, the ROM looks great though! I'm looking forward to the update and see how it runs! Thanks!!
Click to expand...
Click to collapse
For the country issue: did you try just hitting home a few times to skip setup?
Sent from my ADR6425LVW using xda premium
zeroxg4 said:
For the country issue: did you try just hitting home a few times to skip setup?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Yes, I hit home a few times to skip it but the Swype error issue completely cripples this ROM. It pops up around every 5 seconds and you can't get a keyboard to pop up at all. Even after going into keyboard settings there is nothing in there as an alternative to do anything with the ROM.
WizeGuyDezignz said:
To everyone, I wouldn't bother flashing until fixed. When the phone boots up after flashing this ROM, it constantly pops up that Swype has stopped working. It also asks for your country which you can't even select.
But with the Swype error, you can't type anything to set anything up. I went into settings and Swype was greyed out so I couldn't turn it off or activate any other keyboard.
I had to revert to my previous ROM because I couldn't do anything with this one. The ROM itself looks promising from what I saw, but it's not usable in its current state.
Hopefully it's fixed soon!
Click to expand...
Click to collapse
+1 This is exactly what happened to me. But it looks very promising! Good job for not having the device. Thanks....and thats why we backup lol
Works on Alpha 2!
Currently being worked on for latest nightly.
THIS IS NOT MY WORK. Just sharing something I found. The site says it should work on all tablets running ICS with CWM.
I've yet to try it due to lack of free time with my TP, but I figured maybe someone else could figure out if it works, since I'm busy.
http://brobot175.co.uk/MetroUI/Setup2TP.html
Edit: his thread in "Android themes" http://forum.xda-developers.com/showthread.php?t=1583360
this looks interesting. when I have some time I will back up my rom and try this out.
Wow. Will try this in a bit. Looks awesome
Does NOT work! Installation gets aborted in cwm. Tried 7 times
Sent from my Galaxy Note on At&t
Orange_furball said:
Wow. Will try this in a bit. Looks awesome
Does NOT work! Installation gets aborted in cwm. Tried 7 times
Sent from my Galaxy Note on At&t
Click to expand...
Click to collapse
Thanks for confirming. I'll note that in the OP. What rom were you on specifically?
~ E.R.A.
Cyanogenmod 9 Alpha 2
Sent from my HP TouchPad CM9
WOW, very good.
Looks like Omnimo Rainmeter
I tried this a couple days back, I believe I'm the person you are referring to by saying it wasnt working on the Touchpad. I asked the dev and he is looking into it.
I'm trying to fix the installer and I will look into it later today.
I also set up my homescreens, but the thing is that the icons don't align properly and they end up looking bad. I tried it in ADW Ex too as the dev says it works best, but it still didn't work.
Doesn't work with the newest nightly.
Sent from my cm_tenderloin using xda premium
hi guys the villain themer thingy doesnt work so im going into making a zip for each tab
dont understand what is the most used or how anything work on the touchpad forum so could one of you send me the most used roms SystemUI.apk and Framework-res.apk at my email [email protected]
you guys can use CWM right?
BroBot175 said:
hi guys the villain themer thingy doesnt work so im going into making a zip for each tab
dont understand what is the most used or how anything work on the touchpad forum so could one of you send me the most used roms SystemUI.apk and Framework-res.apk at my email [email protected]
you guys can use CWM right?
Click to expand...
Click to collapse
Im running cm9 a2 and I'll get them to you. How do I get the files? And yes, we can use cwm
Sent from my HP TouchPad CM9
Found the files. Emailing them now. Thanks
So this does work...I just installed it on my touchpad and I was running it with no problem. If you go to the dev's website it tells you to flash your rom again, which wont make you loose any apps, and then flash the first package on the website setup. It will flash and work....now the only problem I have is actually putting the widgets on the homescreen. When I try to move them next to each other horizontally, they overlap :/ But the process on the website does work ^_^
Got this in a PM:
boricuab said:
I'm unable to post on the development thread but I'm here just to let you know that the metro UI theme does work you just have to follow the instruction on the guys website it took me a couple trys but indeed does work. http://i1048.photobucket.com/albums/s375/Bryan_Hollins/Screenshot_2012-04-08-00-06-49.png
Click to expand...
Click to collapse
~ E.R.A.
I got that too. But after trying a few times and reflashing it still didn't work
Sent from my Galaxy Note on At&t
I can't install the file. It says error in zip.
Sent from my cm_tenderloin using xda premium
alex1301 said:
I can't install the file. It says error in zip.
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
Same here,
im using nightlies.
It's working. You have to re-install the nightly without any addon before you flash the theme.
Sent from my cm_tenderloin using xda premium
Hmm...I'm using a nightly build. I'd have to check which one I'm specifically using when I get home, but I got the error during the initial flash. I then re-flashed the CM9 nightly rom....and then the first zip package for the MetroUI setup. I didn't restart or anything...I did the ROM flash and then the zip flash. I'll take some screen shots as soon as I get home today.
won't work on AOKP milestone 4 and cherrykang, works on the cm9 nightly.
edit: i have managed to work it all out. ADW Ex launcher has a few limitations in that it won't align the tiles perfectly, anybody know how to sort that?
I have a video of the cwm failure. I reflash cm9 then immediately flash the metro Ui then It aborts.
Sent from my Galaxy Note on At&t
Alright I know it has been a long time since this thread has been edited but now I have a working JoyOS Rom for us!
I present JoyOS!
Pictures: Coming Soon
Features:
IOS Look
Awesome CM7 Performance
Super Smooth
Lots Of Ram Availible
Only 100.6MB Rom
Known Bugs:
Keyboard too small - How to fix - Download a keyboard out market
Settings Are in half - You'll see what I mean
The icons go a lil off the dock bar but you can download something like espier launcher
Lockscreen is small - How to fix - Reboot tablet
When holding N button it will show running apps but whatever you are on will look like messed up lines except the running apps thing.
Download Link:
Here - 100.6MB
I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR NOOK TABLET THIS HAS BEEN UNTESTED ON NOOK TABLET 8GB! YOU HAVE BEEN WARNED!
Credits:
succulent - CM7 - Here
JoyOS - JoyOS
Change Log:
9/1/12
*Got The Rom Working
9/2/12
*Slimmed Down Rom To 100.6MB
*Took Out The Recovery That It Automatically Over Rights So You Can Keep Your Recovery
Change Log:
1. Rom Was Created
Could anyone ADB Logcat for me? That would be awesome! Thanks a lot!! I plan on having this Rom done in at least 2 weeks. Thank you for helping!! My laptop wont ADB Logcat and I should be getting a new one since this one is already broke so when i get ADB on the new one ill Logcat for there and on out
Never mind, the Rom doesn't charge so when it's dead it'll shut itself off and what you have to do is when it boots hurry up and put it in recovery and restore your rom!
i would but i dont know how...if its simple enough...i will learn how to do it
Alright thank you!!
so i need the sdk right
is this right
http://forums.miui.us/showthread.php?113-How-To-Install-ADB-and-Logcat
respond at [email protected]
if you can
sent u a gtlak invitation
You could've at least credit using my forum name.
Use the kernel from the new build 2012628 or don't use it at all. Previous build is no good. :silly:
It's fantastic, thanks man.
From the JoyOS porting guide by blindndumb:
Copy libsqlite.so and libsqlite_jni.so from JoyOS ROM to Base ROM , else you will get acore process ROM to Base ROM , else you will get acore process error and continuous FCs
Thank you!
succulent said:
You could've at least credit using my forum name.
Use the kernel from the new build 2012628 or don't use it at all. Previous build is no good. :silly:
Click to expand...
Click to collapse
I'm so so sorry, I didn't know you had a XDA account
estallings15 said:
From the JoyOS porting guide by blindndumb:
Copy libsqlite.so and libsqlite_jni.so from JoyOS ROM to Base ROM , else you will get acore process ROM to Base ROM , else you will get acore process error and continuous FCs
Click to expand...
Click to collapse
I tried porting it his way but didn't get a boot.
megaghostgamer said:
I tried porting it his way but didn't get a boot.
Click to expand...
Click to collapse
Does copying just those two libs from JoyOS over to your current port (the one that boots) cause a bootloop?
Sent from my Glacier using xda app-developers app
Kinda got my nook bricked by messing around with a rom and im having troubles unbricking it so its going to be a while before i start porting again =(
Sent from my PG06100 using xda premium
megaghostgamer said:
Kinda got my nook bricked by messing around with a rom and im having troubles unbricking it so its going to be a while before i start porting again =(
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
:-(
Hope you're able to breathe life back into her.
Sent from my Glacier using xda app-developers app
There are a few threads here about unbricking. The recovery SD makes it pretty easy too(as long as it works) good luck.
Yeah, I'm having troubles unbricking i keep getting to the screen where it says please contact nook if this happens again I do have a recovery on the SD card but, when I put the recovery on my SD card it on gives me 50MB left
Thats because that is the size of the image.
You'll need to expand the size of the card using gparted in linux.
We are the developers of AvatarROM .
We have upgraded the ROM to JB (4.2.2). Would anyone be interested to do a beta test.
Instructions:
If it's the first time flashing avatarrom or coming from another ROM
Before Flash Avatar ROM you need to install https://www.box.com/s/963cd9d1cf216e4e16e0 via CWM reboot recovery, and then install the ROM
Download link
Amazon S3
Gapps (4.2.2)
Feature request page - https://avatarrom.uservoice.com/forums/193652-avatarrom-feature-request
Reserved
The link is not working ! Can you tell us is everything is working in this ROM ??? And do we need ext4 partition ?
That is a link.
http://s3.avatarrom.com/Unofficial/2.12b/avatar-2.12b-0-20130531_UNOFFICIAL-passion.zip
I'm trying now, thank you Avatar Developers!
no a2sd.... no phone signal....WPA doesnt work....network autodetection doesnt work...with gapps it requires 330/6/100 and u hav to use m2sd...but i dont recommend using this rom now
@bippi79 we really need something like a2sd...
@arnab
You can use mini gapps like that
http://goo.im/devs/BaNkS/GApps/GApps 4.2.2 Minimal.zip
http://forum.xda-developers.com/showthread.php?t=2012857
It is only 8mb. I tried 250\10 without problem.
What is the sebaastin.zip?
I have been trying out Avatar on SGS2 and I am impressed especially by the themeing features and look to use the weebo also.
craagz said:
What is the sebaastin.zip?
Click to expand...
Click to collapse
its a custom hboot.zip which changes ur hboot partition. before doing that u need to install BLACKROSE. it would be better if the OP(BIPPI79) adds this hboot requirement details in the first post
Sent from my Nexus One using Tapatalk
fancyfree said:
The link is not working ! Can you tell us is everything is working in this ROM ??? And do we need ext4 partition ?
Click to expand...
Click to collapse
You can check now
So, after installing this and realizing my hboot was incorrect, I attempted to reflash to the slimrom I had before. Now, I'm stuck in a boot loop. I believe it has to do with the sebaastin.zip. How do I undo what that zip changed?
superGOAT said:
So, after installing this and realizing my hboot was incorrect, I attempted to reflash to the slimrom I had before. Now, I'm stuck in a boot loop. I believe it has to do with the sebaastin.zip. How do I undo what that zip changed?
Click to expand...
Click to collapse
flash the correct hboot for slim rom. wipe all first
Sent from my Nexus One using Tapatalk
Thanks for bringing new roms to the N1 :good:
Gonna test it, hopefully i will be able to install App2SD. Will report tomorrow or the day after to put my troughs :laugh:
Beware...it doesn't have that script...n ya BTW USB debugging is also broken....blackrose doesn't detect ADb means repartition doesn't work.
Sent from my Nexus One using xda app-developers app
[ROM][JB] Beta Testing for AvatarROM
almost all things doesnt work, is really really beta for the moment, thanks Avatar team!
n1newbie said:
its a custom hboot.zip which changes ur hboot partition. before doing that u need to install BLACKROSE. it would be better if the OP(BIPPI79) adds this hboot requirement details in the first post
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
What does it change it to? I know I can just try it, but with the things that don't work I'd rather just know what something will be changed to before I change it. I'm on Oxygen GB right now, but thinking of trying a 4.2 ROM.
bobbyphoenix said:
What does it change it to? I know I can just try it, but with the things that don't work I'd rather just know what something will be changed to before I change it. I'm on Oxygen GB right now, but thinking of trying a 4.2 ROM.
Click to expand...
Click to collapse
Its the zip from the hboot collection post for the old sebaastin ROM. I believe its 250/10.
Sent from my Nexus One using xda premium
question
what does it work? and what doesnt it work? add on post number one @bippi79 thanks!
I couldnt pass home screen, touch didnt work for me, i count press the "accept" button of the home screen tutorial.
xavys said:
I couldnt pass home screen, touch didnt work for me, i count press the "accept" button of the home screen tutorial.
Click to expand...
Click to collapse
check your hboot, thanks:good: