Works on Alpha 2!
Currently being worked on for latest nightly.
THIS IS NOT MY WORK. Just sharing something I found. The site says it should work on all tablets running ICS with CWM.
I've yet to try it due to lack of free time with my TP, but I figured maybe someone else could figure out if it works, since I'm busy.
http://brobot175.co.uk/MetroUI/Setup2TP.html
Edit: his thread in "Android themes" http://forum.xda-developers.com/showthread.php?t=1583360
this looks interesting. when I have some time I will back up my rom and try this out.
Wow. Will try this in a bit. Looks awesome
Does NOT work! Installation gets aborted in cwm. Tried 7 times
Sent from my Galaxy Note on At&t
Orange_furball said:
Wow. Will try this in a bit. Looks awesome
Does NOT work! Installation gets aborted in cwm. Tried 7 times
Sent from my Galaxy Note on At&t
Click to expand...
Click to collapse
Thanks for confirming. I'll note that in the OP. What rom were you on specifically?
~ E.R.A.
Cyanogenmod 9 Alpha 2
Sent from my HP TouchPad CM9
WOW, very good.
Looks like Omnimo Rainmeter
I tried this a couple days back, I believe I'm the person you are referring to by saying it wasnt working on the Touchpad. I asked the dev and he is looking into it.
I'm trying to fix the installer and I will look into it later today.
I also set up my homescreens, but the thing is that the icons don't align properly and they end up looking bad. I tried it in ADW Ex too as the dev says it works best, but it still didn't work.
Doesn't work with the newest nightly.
Sent from my cm_tenderloin using xda premium
hi guys the villain themer thingy doesnt work so im going into making a zip for each tab
dont understand what is the most used or how anything work on the touchpad forum so could one of you send me the most used roms SystemUI.apk and Framework-res.apk at my email [email protected]
you guys can use CWM right?
BroBot175 said:
hi guys the villain themer thingy doesnt work so im going into making a zip for each tab
dont understand what is the most used or how anything work on the touchpad forum so could one of you send me the most used roms SystemUI.apk and Framework-res.apk at my email [email protected]
you guys can use CWM right?
Click to expand...
Click to collapse
Im running cm9 a2 and I'll get them to you. How do I get the files? And yes, we can use cwm
Sent from my HP TouchPad CM9
Found the files. Emailing them now. Thanks
So this does work...I just installed it on my touchpad and I was running it with no problem. If you go to the dev's website it tells you to flash your rom again, which wont make you loose any apps, and then flash the first package on the website setup. It will flash and work....now the only problem I have is actually putting the widgets on the homescreen. When I try to move them next to each other horizontally, they overlap :/ But the process on the website does work ^_^
Got this in a PM:
boricuab said:
I'm unable to post on the development thread but I'm here just to let you know that the metro UI theme does work you just have to follow the instruction on the guys website it took me a couple trys but indeed does work. http://i1048.photobucket.com/albums/s375/Bryan_Hollins/Screenshot_2012-04-08-00-06-49.png
Click to expand...
Click to collapse
~ E.R.A.
I got that too. But after trying a few times and reflashing it still didn't work
Sent from my Galaxy Note on At&t
I can't install the file. It says error in zip.
Sent from my cm_tenderloin using xda premium
alex1301 said:
I can't install the file. It says error in zip.
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
Same here,
im using nightlies.
It's working. You have to re-install the nightly without any addon before you flash the theme.
Sent from my cm_tenderloin using xda premium
Hmm...I'm using a nightly build. I'd have to check which one I'm specifically using when I get home, but I got the error during the initial flash. I then re-flashed the CM9 nightly rom....and then the first zip package for the MetroUI setup. I didn't restart or anything...I did the ROM flash and then the zip flash. I'll take some screen shots as soon as I get home today.
won't work on AOKP milestone 4 and cherrykang, works on the cm9 nightly.
edit: i have managed to work it all out. ADW Ex launcher has a few limitations in that it won't align the tiles perfectly, anybody know how to sort that?
I have a video of the cwm failure. I reflash cm9 then immediately flash the metro Ui then It aborts.
Sent from my Galaxy Note on At&t
Related
There are quite a few ICS Preview ROMs out there in the development subforum. But which one is the best by far? Please give me a link.
Roman's IMO, as it is constantly updated, Links are on the Development section.
Misledz said:
Roman's IMO, as it is constantly updated, Links are on the Development section.
Click to expand...
Click to collapse
Agree. The rest are just builds. Romann's is tweaked. Use the milestone 4 (not build 28) cause it changes your tab's MAC address.
i went to the development section and looked for any thread started by roman. i did not find any, can you give what's the thread name itself or a link? i see many kang there but i dunno if that is it.
Sent from my GT-P7510 using Tapatalk
It's in the first page, in his post, Why is that so hard to read?
DOWNLOADS
Find the latest releases here
Find milestone-4 here
Click to expand...
Click to collapse
http://forum.aokp.co/page/releases
You click on a build, and find your device name. Ignorance is bliss.
Hi, thanks for the information. I flashed the milestone-4 ROM as instructed. But I was stucked at the initial setup step, where it says 'Turning on Wi-Fi...'. I tried to hit the Skip button. But nothing happened. It seemed that the whole system was stucked. It's been like that for hours. Now what should I do?
Sent from my Milestone using Tapatalk
jerminhu said:
Hi, thanks for the information. I flashed the milestone-4 ROM as instructed. But I was stucked at the initial setup step, where it says 'Turning on Wi-Fi...'. I tried to hit the Skip button. But nothing happened. It seemed that the whole system was stucked. It's been like that for hours. Now what should I do?
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
For me aokp gave me glitches in the screscreen the 3/25 cm9 nightly build is running way nicer not all the from control ..
I think you can give it a soft reboot to fix it. Hopefully it shouldn't bootloop
boot into CWM, do a factory reset, clear cache.
Then go to the advanced menu and select "fix permissions". That can help a lot of bugs. If that still doesn't work, I would re-download and flash the rom again. I'm running AOKP CM9 milestone 4 on two different devices just fine.
Thank you guys. I did a hard reset and everything was OK after that.
I just flashed the AOKP Build 28 ICS ROM and so far I really like it compared to the Task V14 ROM that I previously had which random reboots.
What is the difference between roman's AOKP and KANG rom from seraphimserapis?
I'm using Kang and would love to know this also.
Sent from my Samsung Galaxy Tab 10.1 using XDA Premium HD App.
best ice creame.
does camera work?
galaxy tab p7500
sudhirkoli said:
does camera work?
galaxy tab p7500
Click to expand...
Click to collapse
I can't tell if this guy is trolling, or just a complete idiot.
Best ICS ROM
Dear,
I am completely newbie for this forum, I have Galaxy Tab 10.1 (3g), I flashed with latest Cyanogenmod 4.0.3 and stuck with camera functionality.
I do not know, whether this suggested ROM works with all functionality.
Very sorry if, I posted at wrong place.
For the love of Jesus and all mankind, learn to read before you post.
It clearly says in the OP, CAMERA DOES NOT WORK, has reading become an optional skill now?
ok i get it now. aokp means android open kang project. the poster's name is romanbb and not roman. also, in this thread nothing was said in the op that camera does not work. the op is asking what is the best ics rom. anyways when i got time i will try this aokp. thanks again.
Sent from my GT-P7510 using Tapatalk
Bast ICS
Thanks for info, and kind support.
I'm running pershoots and get random closes on flaps and a couple other apps. Also the browser will randomly stop loading pages and needs to be closed then reopened to get working again.
It installed very well but reading the aokp thread there seems to be a fair number of problems with installs that are keeping me from trying it. Are those people just dummies who don't bother tp do full wipes or do things randomly go wrong?
Alright I know it has been a long time since this thread has been edited but now I have a working JoyOS Rom for us!
I present JoyOS!
Pictures: Coming Soon
Features:
IOS Look
Awesome CM7 Performance
Super Smooth
Lots Of Ram Availible
Only 100.6MB Rom
Known Bugs:
Keyboard too small - How to fix - Download a keyboard out market
Settings Are in half - You'll see what I mean
The icons go a lil off the dock bar but you can download something like espier launcher
Lockscreen is small - How to fix - Reboot tablet
When holding N button it will show running apps but whatever you are on will look like messed up lines except the running apps thing.
Download Link:
Here - 100.6MB
I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR NOOK TABLET THIS HAS BEEN UNTESTED ON NOOK TABLET 8GB! YOU HAVE BEEN WARNED!
Credits:
succulent - CM7 - Here
JoyOS - JoyOS
Change Log:
9/1/12
*Got The Rom Working
9/2/12
*Slimmed Down Rom To 100.6MB
*Took Out The Recovery That It Automatically Over Rights So You Can Keep Your Recovery
Change Log:
1. Rom Was Created
Could anyone ADB Logcat for me? That would be awesome! Thanks a lot!! I plan on having this Rom done in at least 2 weeks. Thank you for helping!! My laptop wont ADB Logcat and I should be getting a new one since this one is already broke so when i get ADB on the new one ill Logcat for there and on out
Never mind, the Rom doesn't charge so when it's dead it'll shut itself off and what you have to do is when it boots hurry up and put it in recovery and restore your rom!
i would but i dont know how...if its simple enough...i will learn how to do it
Alright thank you!!
so i need the sdk right
is this right
http://forums.miui.us/showthread.php?113-How-To-Install-ADB-and-Logcat
respond at [email protected]
if you can
sent u a gtlak invitation
You could've at least credit using my forum name.
Use the kernel from the new build 2012628 or don't use it at all. Previous build is no good. :silly:
It's fantastic, thanks man.
From the JoyOS porting guide by blindndumb:
Copy libsqlite.so and libsqlite_jni.so from JoyOS ROM to Base ROM , else you will get acore process ROM to Base ROM , else you will get acore process error and continuous FCs
Thank you!
succulent said:
You could've at least credit using my forum name.
Use the kernel from the new build 2012628 or don't use it at all. Previous build is no good. :silly:
Click to expand...
Click to collapse
I'm so so sorry, I didn't know you had a XDA account
estallings15 said:
From the JoyOS porting guide by blindndumb:
Copy libsqlite.so and libsqlite_jni.so from JoyOS ROM to Base ROM , else you will get acore process ROM to Base ROM , else you will get acore process error and continuous FCs
Click to expand...
Click to collapse
I tried porting it his way but didn't get a boot.
megaghostgamer said:
I tried porting it his way but didn't get a boot.
Click to expand...
Click to collapse
Does copying just those two libs from JoyOS over to your current port (the one that boots) cause a bootloop?
Sent from my Glacier using xda app-developers app
Kinda got my nook bricked by messing around with a rom and im having troubles unbricking it so its going to be a while before i start porting again =(
Sent from my PG06100 using xda premium
megaghostgamer said:
Kinda got my nook bricked by messing around with a rom and im having troubles unbricking it so its going to be a while before i start porting again =(
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
:-(
Hope you're able to breathe life back into her.
Sent from my Glacier using xda app-developers app
There are a few threads here about unbricking. The recovery SD makes it pretty easy too(as long as it works) good luck.
Yeah, I'm having troubles unbricking i keep getting to the screen where it says please contact nook if this happens again I do have a recovery on the SD card but, when I put the recovery on my SD card it on gives me 50MB left
Thats because that is the size of the image.
You'll need to expand the size of the card using gparted in linux.
I'm on the Super Clean Milestone 2 ROM that i like.. but it hasnt been updated in months. I'm looking for a similar ROM but less buggy. Any suggestions? Not looking for all those dark-themed ROMS i saw on development..
Thanks!
30secs said:
I'm on the Super Clean Milestone 2 ROM that i like.. but it hasnt been updated in months. I'm looking for a similar ROM but less buggy. Any suggestions? Not looking for all those dark-themed ROMS i saw on development..
Thanks!
Click to expand...
Click to collapse
AOKP build40... there is a plethora of themes to choose from in the market if you dont like dark themed roms.
30secs said:
I'm on the Super Clean Milestone 2 ROM that i like.. but it hasnt been updated in months. I'm looking for a similar ROM but less buggy. Any suggestions? Not looking for all those dark-themed ROMS i saw on development..
Thanks!
Click to expand...
Click to collapse
If you want a stock like experience then GeeWiz is probably what you want. If you want cutting edge then AOKP is probably the best non-Touchwiz Rom.
Sent from my SCH-I500 using xda app-developers app
pretty much what droidstyle and scarfman4 said.
Thanks guys! I'm going to install AOKP based on your recommendations.
I saw there's a "devil" version.. whats that? and what are the optional gapps? anything i must have for the fascinate?
UPDATE: I've tried flashing to AKOP but i keep getting a status 7 error. Please help!! i don't know how to fix this..
Follow section 4 in Droidstyle's guide in fassy general. Follow it completely.
Sent from my SCH-I500 using xda app-developers app
noobchef said:
Follow section 4 in Droidstyle's guide in fassy general. Follow it completely.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Thanks! found it.. will begin the process
Update: followed the instructions and i'm on the new rom!!
However... i dont see a files browser or he play store?!
30secs said:
Thanks! found it.. will begin the process
Update: followed the instructions and i'm on the new rom!!
However... i dont see a files browser or he play store?!
Click to expand...
Click to collapse
Hmmm, sound like somebody didn't follow instructions and flash Gapps
Make sure you're on CWM fixed for CM7
MAKE A NANDROID
wipe data/factory reset in recovery
flash ROM if you're on ICS, if not flash this THS build 2 first
flash Gapps
reboot
Jay Evans said:
Hmmm, sound like somebody didn't follow instructions and flash Gapps
Make sure you're on CWM fixed for CM7
MAKE A NANDROID
wipe data/factory reset in recovery
flash ROM if you're on ICS, if not flash this THS build 2 first
flash Gapps
reboot
Click to expand...
Click to collapse
Yeah sorry... i'm a little rusty and not sure where to get the gapps from... visited half a dozen sites looking for them but no luck...
You can get them from goo manager which is on the play store.
Sent from my SCH-I500 using xda premium
bobloblaw1 said:
You can get them from goo manager which is on the play store.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
I googled it and installed the app (it says installed) through my computer.
but... i don't have play store on my phone or any google apps to sync my google account. can someone please do me a favor and tell me what i need to do to start getting my phone going? i've been with a blank OS all day...
What's the first step i need to do to start getting play store/google account going on my phone? im clueless..... couldn't find a single app to start going..
Last time I checked, Droidstyle's Guide had all the files you'd need, including Gapps. Perhaps give it another read.
jawman27 said:
Last time I checked, Droidstyle's Guide had all the files you'd need, including Gapps. Perhaps give it another read.
Click to expand...
Click to collapse
Was able to get gapps from google. everything works now. thanks!
You should try THS's ICS rom, it's very close to being brought on with full cm9 support and they are constantly updating it.
http://rootzwiki.com/topic/16630-romicsimm76d-teamhacksungs-ics-port-for-fascinate-build-14-062712/
We are the developers of AvatarROM .
We have upgraded the ROM to JB (4.2.2). Would anyone be interested to do a beta test.
Instructions:
If it's the first time flashing avatarrom or coming from another ROM
Before Flash Avatar ROM you need to install https://www.box.com/s/963cd9d1cf216e4e16e0 via CWM reboot recovery, and then install the ROM
Download link
Amazon S3
Gapps (4.2.2)
Feature request page - https://avatarrom.uservoice.com/forums/193652-avatarrom-feature-request
Reserved
The link is not working ! Can you tell us is everything is working in this ROM ??? And do we need ext4 partition ?
That is a link.
http://s3.avatarrom.com/Unofficial/2.12b/avatar-2.12b-0-20130531_UNOFFICIAL-passion.zip
I'm trying now, thank you Avatar Developers!
no a2sd.... no phone signal....WPA doesnt work....network autodetection doesnt work...with gapps it requires 330/6/100 and u hav to use m2sd...but i dont recommend using this rom now
@bippi79 we really need something like a2sd...
@arnab
You can use mini gapps like that
http://goo.im/devs/BaNkS/GApps/GApps 4.2.2 Minimal.zip
http://forum.xda-developers.com/showthread.php?t=2012857
It is only 8mb. I tried 250\10 without problem.
What is the sebaastin.zip?
I have been trying out Avatar on SGS2 and I am impressed especially by the themeing features and look to use the weebo also.
craagz said:
What is the sebaastin.zip?
Click to expand...
Click to collapse
its a custom hboot.zip which changes ur hboot partition. before doing that u need to install BLACKROSE. it would be better if the OP(BIPPI79) adds this hboot requirement details in the first post
Sent from my Nexus One using Tapatalk
fancyfree said:
The link is not working ! Can you tell us is everything is working in this ROM ??? And do we need ext4 partition ?
Click to expand...
Click to collapse
You can check now
So, after installing this and realizing my hboot was incorrect, I attempted to reflash to the slimrom I had before. Now, I'm stuck in a boot loop. I believe it has to do with the sebaastin.zip. How do I undo what that zip changed?
superGOAT said:
So, after installing this and realizing my hboot was incorrect, I attempted to reflash to the slimrom I had before. Now, I'm stuck in a boot loop. I believe it has to do with the sebaastin.zip. How do I undo what that zip changed?
Click to expand...
Click to collapse
flash the correct hboot for slim rom. wipe all first
Sent from my Nexus One using Tapatalk
Thanks for bringing new roms to the N1 :good:
Gonna test it, hopefully i will be able to install App2SD. Will report tomorrow or the day after to put my troughs :laugh:
Beware...it doesn't have that script...n ya BTW USB debugging is also broken....blackrose doesn't detect ADb means repartition doesn't work.
Sent from my Nexus One using xda app-developers app
[ROM][JB] Beta Testing for AvatarROM
almost all things doesnt work, is really really beta for the moment, thanks Avatar team!
n1newbie said:
its a custom hboot.zip which changes ur hboot partition. before doing that u need to install BLACKROSE. it would be better if the OP(BIPPI79) adds this hboot requirement details in the first post
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
What does it change it to? I know I can just try it, but with the things that don't work I'd rather just know what something will be changed to before I change it. I'm on Oxygen GB right now, but thinking of trying a 4.2 ROM.
bobbyphoenix said:
What does it change it to? I know I can just try it, but with the things that don't work I'd rather just know what something will be changed to before I change it. I'm on Oxygen GB right now, but thinking of trying a 4.2 ROM.
Click to expand...
Click to collapse
Its the zip from the hboot collection post for the old sebaastin ROM. I believe its 250/10.
Sent from my Nexus One using xda premium
question
what does it work? and what doesnt it work? add on post number one @bippi79 thanks!
I couldnt pass home screen, touch didnt work for me, i count press the "accept" button of the home screen tutorial.
xavys said:
I couldnt pass home screen, touch didnt work for me, i count press the "accept" button of the home screen tutorial.
Click to expand...
Click to collapse
check your hboot, thanks:good:
Touchwiz 4.3
This is Stock WITHOUT any added Note3 features
Download Link
R.A.H.TW_4.3_11-27-13-1908.zip - 1.09 GB
First Boot can take a while be patient.
Known TWRP issue ( and possible CWM ) attempting to preform a restore of TW4.3 may cause bootloop
Bugs
WiFi bug (see wifi patch section)
Signal bar does not show accurate signal (if any)
Possible root lost on first boot (see Root section)
WIFI PATCH FIX
Here's how to get Wifi working. Do this after installing the ROM. Thanks to seanzscreams for the fix and stvn1337 for posting the info. What this fix does is adds the paramaters needed for Wifi to work on TouchWiz 4.3 based ROMs while still allowing us to flash to other ROMs outside of the TouchWiz 4.3 stuff. Be forwarded that these steps do need to be followed pretty much dot on especially when it comes to apply the patch. Deviating on that part might cause some major issues including bricking your device. I will not be held liable if that were to happen or will XDA. You've been pretty well warned. Don't worry this is a pretty easy patch to apply so don't worry too much about it. Smile, eat a Kit Kat, and just do what I tell you. In no time you'll have working Wifi on this ROM.
FILES
4.3param_tz.zip - 690.83 KB
INSTRUCTONS
1 - Download Odin3 and the WiFi Fix files.
2 - Extract Odin3 and the WiFi Fix files. For the WiFi fix you just need to extract 4.3param_tz.zip so the 4.3param_tz.tar file is ready for us with Odin3.
3 - Download and install Samsung drivers if you don't have them already.
4 - Turn off Note 2. After turned off press Volume Down + Home Button + Power to boot into the bootloader.
5 - Plug Note 2 into PC with Odin3 running.
6 - Once your PC has detected and installed drivers your Note 2 should show up in Odin3.
7 - Load the Wifi fix file (should be named 4.3param_tz.tar) into the PDA option in Odin3.
8 - Hit the Start button. It'll only take seconds for the file to do its magic then your Note 2 will reboot into recovery.
9 - Reboot out of recovery.
10 - ????
11 - Wifi should work now!
12 - ????????
13 - PROFIT!
Click to expand...
Click to collapse
Lost root?
Flash SuperSU from this thread
[2013.11.26] SuperSU v1.80 by Chainfire
Features And Mods
Wanam Xposed
Credit
wesamothman for the base and passing ideas back and forth
lacoursiere also for passing ideas back and forth
stvn1337 for finding the sec-ril from Spint Note2
Nice!!!!
Sent from my SCH-I605 using xda app-developers app
Sweet...if u need help let me know...I'm willing to do what I can to help even test...
Nice I'll keep an eye on this thread.
Why haven't people been working on 4.3? I wish I knew how to
Sent from my SCH-I605 using xda app-developers app
m0j09987 said:
Why haven't people been working on 4.3? I wish I knew how to
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
What does your comment mean?...
4.3 aosp is out...
4.3 TW JUST LEAKED WITHIN 24hrs ago...
And I guess im NOT working on 4.3??? Wtf man
No offense bro. U stated that your not working on it and its for Dev. That's all I'm saying . I mean if you got it then by all mean mad props to u and looking forward to using your work.
Sent from my SCH-I605 using xda app-developers app
m0j09987 said:
No offense bro. U stated that your not working on it and its for Dev. That's all I'm saying . I mean if you got it then by all mean mad props to u and looking forward to using your work.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Please tell me where I said im not working on it? You know cause the port was done all by itself...
I mean no disrespect but its comments like yours why less and less people release crap, why not just get it working for myself and thats it... why do other people need to use devs hard work and not give a hoot. Then make threads about where did all the TW devs go? I havent seen what I deem as enough updates or some other ungrateful soundsing posts
Gentleman please stay OT and inline. No disrespect allowed.
Thank you for your cooperation.
EFM
runandhide05 I just want to say thanks for all the hard work you have shared with us so far on bringing the Touchwiz 4.3 leak to our Verizon Note 2.
AngryManMLS said:
runandhide05 I just want to say thanks for all the hard work you have shared with us so far on bringing the Touchwiz 4.3 leak to our Verizon Note 2.
Click to expand...
Click to collapse
Thanks for the initial push, whether it becomes anything or not. You're helping to keep the note 2 alive.
Runandhide. I'm sorry about what I said. I didn't mean it the way you took it. I thank you for what u got to our phone.
Sent from my SCH-I605 using xda app-developers app
can't wait to try this. I'm tempted to flash and make a nan so when it's in alpha/beta stage i can just flash that over it lol
OP, thanks for making this available to DEVs. So sorry that some people just don't get it or appreciate it!
Nice!! Thanks for giving me/us hope on seeing a TW 4.3 ROM before Big Red gets around to releasing one :beer:
Sent from my SCH-I605 using xda app-developers app
@runandhide05
Thank you man. Really appreciate what you're doing.
Dave
This is good news. Thanks for sharing.
Sent from my SCH-I605 using Tapatalk 4
@runandhide05 I am in the same boat as you I have everything working except data/signal.. I have ported from n7100 before but the process seems to be different in this case..4.3. I am still trying to get it corrected with different methods. Can you tell me what you have done so far so we can compare? I started with stock base 4.3 N7100.. Added our csc files, build.prop edits for cdma and a couple lib files and our modem. When I boot it boots fine.. In mobile networks I have option to select cdma/lte but still no signal.. We our missing something that i cant seem to find. Some files that we usually port over have been changed or are non existant in 4.3... and btw what kernel are you using I think this maybe the source of our problem..I can only seem to flash it and get it to boot with the 4.3 stock kernel and I am not skilled or have enough knowledge to know whether kernels have anything to do with lte capabilities.. I would assume so.. And if thats the case we will have to wait for the n7105 leak to get kernel source..
lacoursiere18 said:
@runandhide05 I am in the same boat as you I have everything working except data/signal.. I have ported from n7100 before but the process seems to be different in this case..4.3. I am still trying to get it corrected with different methods. Can you tell me what you have done so far so we can compare? I started with stock base 4.3 N7100.. Added our csc files, build.prop edits for cdma and a couple lib files and our modem. When I boot it boots fine.. In mobile networks I have option to select cdma/lte but still no signal.. We our missing something that i cant seem to find. Some files that we usually port over have been changed or are non existant in 4.3... and btw what kernel are you using I think this maybe the source of our problem..I can only seem to flash it and get it to boot with the 4.3 stock kernel and I am not skilled or have enough knowledge to know whether kernels have anything to do with lte capabilities.. I would assume so.. And if thats the case we will have to wait for the n7105 leak to get kernel source..
Click to expand...
Click to collapse
Its looking like we will need to wait for a n7105 for the lte.
Using stock kernel. All others fail to boot.
runandhide05 said:
Its looking like we will need to wait for a n7105 for the lte.
Using stock kernel. All others fail to boot.
Click to expand...
Click to collapse
I do have a friend that I have developed a rom with said that he got it booted and signal.. SO let me talk to him today and maybe we can crack this thing.. I was thinking maybe n7105 saber kernel..I will try and let you know.. I have wifi working as well as gps..