Simple mobile is a reseller of t-mobile so the phone doesnt need to be unlocked to make incoming and outgoing calls or even text messages but to access the internet and mms features the settings need to be changed.
I would like to know if anyone has the correct MMS/DATA configuration.
Mysimplemobile.com does not have the settings in their programming list, nor have i found any forums through google as pertaining to my request. If you guys could help me out it would be very much appreciated.
-thank you in advance
HTC HD7 – Internet only
Press the right arrow
Select settings
Select cellular
Select edit apn
Enter the following settings:
APN: simple
User name:blank
Password:blank
Press the check mark Your internet is configured!
This is only for internet. But once you're in there, go into the market and get HTC Connection setup and select simple mobile. It will finish the settings for you and you'll have internet and MMS.
quickbird144 said:
HTC HD7 – Internet only
Press the right arrow
Select settings
Select cellular
Select edit apn
Enter the following settings:
APN: simple
User name:blank
Password:blank
Press the check mark Your internet is configured!
This is only for internet. But once you're in there, go into the market and get HTC Connection setup and select simple mobile. It will finish the settings for you and you'll have internet and MMS.
Click to expand...
Click to collapse
I entered these settings before because i know the O.S is the same but it didnt seem to work, i will try again and try to comfirm it. Thank you regardless for your effort
ICY-HURR said:
I entered these settings before because i know the O.S is the same but it didnt seem to work, i will try again and try to comfirm it. Thank you regardless for your effort
Click to expand...
Click to collapse
That's odd. That normally worked for me. Did you try giving them a call?
I use Simple Mobile too. Just download HTC Connection app from the HTC app section in the Marketplace over WiFi. Run the app with your SIM inside the phone. It will auto select USA T-Mobile. Tap the menu (...), select Manual and scroll up to select simple mobile.
You'll be all set.
blackmamba said:
I use Simple Mobile too. Just download HTC Connection app from the HTC app section in the Marketplace over WiFi. Run the app with your SIM inside the phone. It will auto select USA T-Mobile. Tap the menu (...), select Manual and scroll up to select simple mobile.
You'll be all set.
Click to expand...
Click to collapse
That's how I got mine too work. I only seem to be getting EDGE speeds though, are you getting 3g speeds? My speed tests are showing 130-160kb/s. I've only tested at my house so far, maybe I'll try around town.
blackmamba said:
I use Simple Mobile too. Just download HTC Connection app from the HTC app section in the Marketplace over WiFi. Run the app with your SIM inside the phone. It will auto select USA T-Mobile. Tap the menu (...), select Manual and scroll up to select simple mobile.
You'll be all set.
Click to expand...
Click to collapse
Whenever I do do this is says it switches fine but when I go back to it says Tmobile. and keeps reseting itself. any advice?
i cant seem to find the dam htc connection app >_< in the market place.
does anyone have a link to download it
rxc777 said:
i cant seem to find the dam htc connection app >_< in the market place.
does anyone have a link to download it
Click to expand...
Click to collapse
Just click the HTC Apps option when you enter the market. It's in the list that pops up.
kikiodead said:
Whenever I do do this is says it switches fine but when I go back to it says Tmobile. and keeps reseting itself. any advice?
Click to expand...
Click to collapse
thats because Simple runs on T-Mobile. unforunately, you have to manually select it each time you swap your sim card.
---------- Post added at 05:37 AM ---------- Previous post was at 05:36 AM ----------
abanh said:
That's how I got mine too work. I only seem to be getting EDGE speeds though, are you getting 3g speeds? My speed tests are showing 130-160kb/s. I've only tested at my house so far, maybe I'll try around town.
Click to expand...
Click to collapse
perhaps you are in an EDGE only location.
blackmamba said:
thats because Simple runs on T-Mobile. unforunately, you have to manually select it each time you swap your sim card.
---------- Post added at 05:37 AM ---------- Previous post was at 05:36 AM ----------
perhaps you are in an EDGE only location.
Click to expand...
Click to collapse
No one gets 3G speeds on SImple Mobile unless you are on the 60$ 4G plan !
I hate to bring back an old thread, but I'm having some trouble with my unlocked radar 4g on simple mobile. I used the htc connection setup app and selected simple mobile, but it keeps switching back to t-mobile. Internet works and I can send mms, but I can't receive mms. Any ideas?
JRW160 said:
I hate to bring back an old thread, but I'm having some trouble with my unlocked radar 4g on simple mobile. I used the htc connection setup app and selected simple mobile, but it keeps switching back to t-mobile. Internet works and I can send mms, but I can't receive mms. Any ideas?
Click to expand...
Click to collapse
A big problem with putting any windows on a mvno is that your mms settings will be limited I'd there at all
I got it working. The connection setup app seems to default to tmobile, but the simple mobile settings are working.
Related
How can I change my mms settings. when I open messages and the click settings then click connection settings it shows the settings but will not let me edit them can anyone help with this thank you
I belive there is a way to edit these settings via cdma workshop but i dont know too much about that
I cant get the phone to connect to the work shop
Does anybody know if they have rooted this phone yet I read the forum about it it does seem like they have yet
Root is a work in progress.
What are you messing with your settings for? if your having issues just run *288 and let it do it. if that doesnt work use the RUU Update, and then reprogram your phone and use *288
I cant I have the Eris running on Cricket I have the phone, internet, text and the market running great but would like to have mms
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
FireSokar said:
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
Click to expand...
Click to collapse
I'll take another order of that link as well.
Who wants to BET hes talking about the MOTO Droid...
FireSokar said:
Who wants to bed hes talking about the MOTO Droid...
Click to expand...
Click to collapse
Quit trying to correct me in every forum i post in.
FireSokar said:
Quit trying to correct me in every forum i post in.
Click to expand...
Click to collapse
Talking to me? If so, I meant that as I'm confused as to whether he did mean the Droid or not.
Nice ASSumption though.
Change PRL, network settings
dial ##778 then edit settings
so some body finde out how he did to make it work on criket?
wat about using APN Backup & Restore?
deseo said:
so some body finde out how he did to make it work on criket?
Click to expand...
Click to collapse
no, as above, edit security settings in epst
uhhh, yoo hooo! guys, the htc based android phones are dirt simple to program for use on another network..
I've had my eris running full on alltel over two months now with the unl. data plan. Never looses 3G, alltels 3G coverage is wicked sweet.
Getting Voice & SMS working:
Get current .PRL file for your network(alltel, sprint, vzw, cricket, etc..), google for it. Mount your phone thru USB, drag the PRL to the root of the SD card.
Unmount
Dial##PRL
Enter SPC code
Select PRL from SD
Restart Phone
Activate phone with your carrier, lie about what phone it is, i told alltel i'm a Samsung Delve, a phone they have.
They'll tell you to *228 it, this will work perfectly after you've programmed the PRL described above.
Hang up with them.
Getting data to work:
Dial ##PST send.
Enter SPC code
Go to security...
Google for those settings for your carrier and enter all that is asked for in that menu screen.
Do nothing else, restart the phone.
Now, setting up MMS on the Eris is a pain, I still can't get it.
When going to Messages, Settings, Connection settings, ... i am not allowed to edit those settings, they're stuck at vzw values.
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
stevey500 said:
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
Click to expand...
Click to collapse
It's probably just allowing you to input settings but unable to save them due to lack of permissions. Looks like MMS is screwed until root gets here :\
how do you get web working on crickets network ive change the settings from the security but still no luck.
Whilst using the root for my xperia x10 I ran into a problem, I couldn't use data on apps other than my browser(couldn't download anything either) but the only way to fix this is to go to Settings>Wireless Controls> Mobile Networks>Access Point Names... from there delete GoRogers, then press you options button and select New APN, put in Name- Rogers, Apn- rogers-core-appl1.apn, then save and you 3g access will be once more. Hope I helped, have a cheeky day
EDIT: I forgot to mention that this is only on the rogers network, sorry..
Edit: if core-rogers-appl1.apn didnt work call rogers to refresh network.
http://www.xperiax10root.com/rogers-apn-settings
for full info
Well my way is much simpler and covers every thing you need to do you cheeky basterd lol I joke but it is faster n simpler
Sent from my X10i using XDA App
egyptshun said:
Well my way is much simpler and covers every thing you need to do you cheeky basterd lol I joke but it is faster n simpler
Click to expand...
Click to collapse
Sure it's faster, but without entering your MMS settings, I'm guessing you aren't able to send MMS messages (e.g. picture texts)?
egyptshun said:
Well my way is much simpler and covers every thing you need to do you cheeky basterd lol I joke but it is faster n simpler
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Faster, simpler and incomplete. You're missing the MMS settings.
Just in case someone looks in here and doesn't look anywhere else, these are the settings:
Code:
Rogers Internet
rogers-core-appl1.apn
not set
not set
not set
not set
not set
http://mms.gprs.rogers.com
10.128.1.69
80
302
720
not set
my way.
After rooted to Build Number R2BA023, my 3G was not working.
So here is what i did ... by common sense (NO DISRESPECTED TO ANYONE).
Restart the x10i > goto into setting > Wirless controls > Network operators > Select automatically > then Auto internet settings > choose your operator (ie vodafone contract, PAYG etc).
Then my 3g is working .... easy, no fucing about with setting or inputting stuffs.
Oh yes, I am on vodafone contract with UK network. Dont know if this will work in different region.
Let us know.
viet2viet said:
After rooted to Build Number R2BA023, my 3G was not working.
So here is what i did ... by common sense (NO DISRESPECTED TO ANYONE).
Restart the x10i > goto into setting > Wirless controls > Network operators > Select automatically > then Auto internet settings > choose your operator (ie vodafone contract, PAYG etc).
Then my 3g is working .... easy, no fucing about with setting or inputting stuffs.
Oh yes, I am on vodafone contract with UK network. Dont know if this will work in different region.
Let us know.
Click to expand...
Click to collapse
Glad to hear you got yours working Not sure if you noticed though, this post pertains to Rogers and the x10a in Canada. Sometimes the option to automatically get the settings fails due to the fact we're using a generic ROM.
im on 3 AUS. i went and did all those steps, but i still cannot get my 3g up..
nekkidtruth said:
Glad to hear you got yours working Not sure if you noticed though, this post pertains to Rogers and the x10a in Canada. Sometimes the option to automatically get the settings fails due to the fact we're using a generic ROM.
Click to expand...
Click to collapse
the last part is very true.
with the auto-settings my 3g was slow and either than browsing no other internet function would work. i used the settings for 3g for rogers i found on the internet and everything works, and fast and now the market works on 3g(couldn't get it to work on 3g with the auto-settings).
dam this is a good fix!
is there a difference between entering rogers-core-appl1.apn and internet.com for Rogers apn in Canada?
internet.com just allows data to work, while the core-appl1 apn allows both data and mms to work.
the auto select apn feature sets up rogers phones with the goam.com access point, not internet.com or appl1. not sure what the difference is but the goam.com only seems to allow the browser to work. might be for those plans that allow unlimited mobile web surfing for cheap price?
hondaguy said:
internet.com just allows data to work, while the core-appl1 apn allows both data and mms to work.
the auto select apn feature sets up rogers phones with the goam.com access point, not internet.com or appl1. not sure what the difference is but the goam.com only seems to allow the browser to work. might be for those plans that allow unlimited mobile web surfing for cheap price?
Click to expand...
Click to collapse
Thanks for the clarification not a clue about goam.com, my phone is set up with internet.com and media.com separately, no problem so far, just my account not showing data anymore, that scares me a little hehe
SiL3nTKiLL said:
dam this is a good fix!
Click to expand...
Click to collapse
Damnnn righttt! (Y)
Sent from my X10i using XDA App
FRiKiNFRoG said:
Thanks for the clarification not a clue about goam.com, my phone is set up with internet.com and media.com separately, no problem so far, just my account not showing data anymore, that scares me a little hehe
Click to expand...
Click to collapse
until last week i too was adding both the internet.com and media.com apn manually, but it is a lot less work just adding the combined apn, especially when flashing back and forth, and back and forth again, with different roms.
you definitely do not want to use an android device without a data account, so if you have access to data but no data plan you could be setting yourself up for a huge bill!!
I'm not sure if this is just me or what... but ever since I have rooted, rogers My Account app wont show my data usage. It says 0mb used, when clearly I've used it way more... even downloaded apps using 3g from the market. I used the internet.com apn. Also it doesn't display my data usage on the rogers site either.. it says 0mb again. I can see all my minutes that I've used for voice and my texts but data sais nothing used. Am I somehow spoofing my data usage to rogers? I'm confused.
gulpreet said:
I'm not sure if this is just me or what... but ever since I have rooted, rogers My Account app wont show my data usage. It says 0mb used, when clearly I've used it way more... even downloaded apps using 3g from the market. I used the internet.com apn. Also it doesn't display my data usage on the rogers site either.. it says 0mb again. I can see all my minutes that I've used for voice and my texts but data sais nothing used. Am I somehow spoofing my data usage to rogers? I'm confused.
Click to expand...
Click to collapse
Good question. Will have to wait until my invoice is released in order to see how and if they are calculating my bandwidth as I am having the same issue. My invoice comes out tomorrow.
Edit: If it turns out it truly is this easy to game Rogers data usage... lets just keep it our little secret.
rynoon said:
Good question. Will have to wait until my invoice is released in order to see how and if they are calculating my bandwidth as I am having the same issue. My invoice comes out tomorrow.
Edit: If it turns out it truly is this easy to game Rogers data usage... lets just keep it our little secret.
Click to expand...
Click to collapse
I'm hoping it is this easy my invoice wont be coming for some time so I couldn't check.
It seems my account data is being tracked... darn...
Android Variations: Check em out!
Wrong its the old .apn for rogers it doesn't allow data to work
Sent from my X10a using XDA App
I can't use mobile internet using Sun Cellular (I'm on plan 350), no 3g icon appears when I enable data traffic but I whenever I use a globe prepaid sim, 3g icon appears.
Tried calling SUN hotline, and they told me that I must go to the manufacturer of my phone.
I'm certain that the problem with my x10 since the same thing happened to me when using Globe prepaid sim but I replaced it and bought a new one and the 3G icon would appear.
Anybody experiencing the same problem?
do you have the correct apn settings? I'm not sure anymore what the supposed setting for sun is and if you really have to set it, i'm not in the Phil. anymore. but try putting in minternet or fbband.
Go here and download an Excel file of any phone setting and copy that to your APN... Or follow instruction on http://suncellular.com.ph/ecs_configure.php
roaringhere said:
Go here and download an Excel file of any phone setting and copy that to your APN... Or follow instruction on http://suncellular.com.ph/ecs_configure.php
Click to expand...
Click to collapse
There is not x10 mini settings here, but I also tried downloading settings for X8 since its almost the same. but having an error when downloading the settings. it show some php error on the downloaded spreadsheet.
me too
same problem here. 3g wont even show up. using my nokia phone, i always have full 3g signal. with my x8 i only see E (edge lang)?
Okay so my phone is unlocked, my data works fine, but when I send a photo it keeps telling me to try and send again, and when I receive a photo it says "get media content now", and it does nothing just repops up.
Try HTC Connection setup
blasteryui said:
Okay so my phone is unlocked, my data works fine, but when I send a photo it keeps telling me to try and send again, and when I receive a photo it says "get media content now", and it does nothing just repops up.
Click to expand...
Click to collapse
if it is not already installed on your phone download and install from the marketplace an app called connection setup. It should be in the HTC section. Run it in the manual mode and select your operator from the list. This works for me. I have an locked to tmobile Radar but am using Simple mobile and everything works as it should.
not working
kwambewright said:
if it is not already installed on your phone download and install from the marketplace an app called connection setup. It should be in the HTC section. Run it in the manual mode and select your operator from the list. This works for me. I have an locked to tmobile Radar but am using Simple mobile and everything works as it should.
Click to expand...
Click to collapse
hello i did try all that and does not work in fact the applicaction you say is not available and the only one i find is connectionset the htc is not available i guess plus i did put some apn details by going to settings - cellular - active network is on :simple mobile data connection is On data roaming is on Roam and network selection i have simple and i did edit Apn: simple user: blank pass: blank proxy the operator by simple ask to put this 216.155.165.50 proxy port:8080 i did mark done
and nothing works no even mms internet
only call and text works
;
Okay so I just wanted to help out anyone else who wanted to get their DNA flashed to PagePlus since there are no (complete / dedicated) guides for this. Also, I figure I'd save a couple of people ~$20 - $50 to pay to have their phones flashed. I'm no expert at this, but I did get voice, sms and 3G (see below) data working. I know how to get MMS working (natively) but I am only familiar on how to do it with Cyanogenmod / CM-based ROMs (I'm on ViperDNA). So here we go. (Sorry for the lack of pictures, I'm just short on time right now.)
What you'll need:
Phone Information: Know your MIN, MDN and SID. You can get this information from PagePlus.
HTC Sync. You can get it here.
CDMA Workshop 2.7. Get the full version.
HTC Diag drivers (read through for this, download below).
PagePlus PRL files (download below).
A stock DNA, or at least one running a stock ROM like this. It's needed to access Diagnostic Mode.
An unactivated Verizon 4G LTE Micro SIM card (you can get one here for $5). This is critical.
Once you have all of this ready, you can get to flashing!
Make sure you have everything prepped. Get your PagePlus account setup and activated (phone number and plan). You won't be able to add your phone to your account specifically yet, but you will put the number in service. Also, make sure you've got the SIM card with you as well. DO NOT PUT THE SIM IN THE PHONE YET.
Install HTC Sync if you haven't already. This will install the HTC Drivers for you.
Connect your phone to your computer and let all the drivers install.
Once completed, go to the phone dialer and dial ##3424#. This will put the phone in diagnostic mode. Windows will then install the HTC DIAG and HTC DIAG 9k drivers. Windows found and installed the drivers for me, so they may work for you. If the installation fails, just follow the instructions to install the DIAG drivers here. (Note: The Device Manager won't say HTC USB Modem, it'll say HTC Diagnostic Interface (COMX) & HTC Diagnostic Interface - 9k (COMX).)
Once installed, enter ##3424# on your DNA's keypad again if necessary, go to the Device Manager and check if the two HTC Diagnostic ports are listed under LPT/COM Ports without the yellow triangle. If there's no error triangle you're good to go.
Take note of the COM port that the "HTC Diagnostic Interface - 9k" diagnostic interface is on. This is what we'll be writing to.
You just got past the first hurdle. Now it's time to start actually flashing the phone.
Open up CDMA Workshop. Hopefully you'd have had this downloaded by now.
Connect to the COM port that HTC Diagnostic Interface - 9k is on. Click connect. YOU CANNOT CONNECT TO THE REGULAR (NON-9k) HTC DIAGNOSTIC INTERFACE'S PORT. This is normal.
The status bar at the bottom of the window will say "Ready..." if you are connected. Click read. If everything on the left hand side of the window populates, you're good.
Now for these next parts, I'm going to give my own experience. I had issues with the phone not responding to the write commands (it appeared) so I'd always write everything multiple times just to be safe. I'd also have to enter the SPC unlock code numerous times throughout working on the phone. It was quite annoying. Settings stuck though, which was good.
Go to the Security tab. Look for the SPC section. Enter "000000" (without quotes) into the box above the Read and SPC buttons. Then click SPC > Send. you'll then get a message saying the phone has been unlocked.
Go to the Other tab. Look under RU-IM. Click the drop down box and select "NV-only".
In the same tab go to the PRL box. "NAM1" should be selected in the drop down box. Under it click the Write button and browse to the folder with the downloaded PagePlus PRLs. I recommend choosing to write "52711.prl" as that's the one that worked for me. Write the PRL to NAM1.
Click the drop down box and select NAM2. Write the same PRL to it as well.
Switch the the NAM tab. Click the Read button at the bottom of the box. The fields should populate with data.
Overwrite the MIN field with the info PagePlus gave you. Enter your phone number into Dir_Number (the field to the right of MIN). then go down to SID and replace that number with the SID PagePlus gave you. Write the data.
Click read to ensure the data was written. Go back to the Main tab and then go to Mode > Reset. Disconnect from CDMA Workshop and reboot your phone.
Once rebooted, connect the phone to your PC again and enter DIAG Mode (##3424#). Open up CDMA workshop and connect to the appropriate COM port. Read the data and ensure everything in the NAM tab is what you entered. If it is correct, you may disconnect end get out of DIAG Mode.
Alright, here's where it gets changed up. Wifi was not working for me on the stock ROM that I flashed, so I flashed my DNA to ViperDNA after these steps (which I recommend). If wifi is working for you, you can just continue then.
Open up the Play Store and search for LTE On/Off (for the HTC Thunderbolt). Install it.
Open it up, scroll down to the radio settings and select CDMA auto (PRL). The settings may not stick at first. Just keep applying it and turn the radio on and off. (When I would select it, it would change to CDMA + EvDo/LTE and I'd have to keep toggling it and selecting CDMA auto (PRL) until it stuck).
Enter airplane mode for a minute and then disable it. Wait a minute or two. If the signal bars show up without the roaming sign, you're good. Go to Settings > Mobile Data. You should see your data mode set to CDMA (on ViperDNA at least). DO NOT EDIT THIS.
Shut your phone off. Insert your SIM card. Turn your phone on.
Open up LTE On/Off and make sure that it's still set to CDMA auto (PRL). You should be getting text messages (to check, just use Google Voice and send a text to your number). Call *22890 or *22891. It may not work. Wait a bit though as it may start auto activating for you without needing to actually open the phone app or anything (this happened for me). It'll activate the phone with Verizon Prepaid (obviously not PagePlus) BUT THIS IS NORMAL. Let the phone finish activating.
Make a call and listen to the instructions. It'll say something about your activation PIN being defaulted to the last 4 digits of your number, and to press 1 for English texting or something. Just press one.
Congratulations, your phone is flashed. You should now have voice, sms and 3G working.
If 3G isn't working for you, kick your phone into airplane mode for a bit and then disable it. Also toggle Mobile Data on and off once or twice. Eventually (within 15 minutes) 3G will start working.
Extended Notes
If for some reason the "52711.prl" list results in a roaming signal, try flashing one of the other lists included in the download. Make sure you are writing to BOTH NAM1 and NAM2.
If the HTC Diag drivers don't work for you / are not recognized, install PdaNet and then get the diagnostic drivers from there.
I am not 100% sure if this will work, so if any CM/CM-based ROM users can confirm this that'd be great. I used this same method on my Rezound to get MMS working on PagePlus. Just do this: http://forum.xda-developers.com/showpost.php?p=41981275&postcount=172.
Can I ask those of you who have flashed their DNAs to PagePlus using this guide to please report back with 3G speeds (post a picture using the SpeedTest.net app)? Thanks! I just want to make sure 3G is working as best as it possibly can. So far speeds are pretty fast for me though.
TO GET MMS WORKING ON 8SMS: http://forum.xda-developers.com/showpost.php?p=50052065&postcount=24 (Give thanks to CapnChaos for the solution!)
TO GET MMS WORKING ON THE STOCK SMS APP (for ViperDNA): http://forum.xda-developers.com/showpost.php?p=51140821&postcount=30 (Give thanks to jeanr464 for the solution!)
Credits
I would never have figured out how to do this without the guide on flashing the Rezound to PagePlus from javamaan, Yura80, watt19, AsianCajun and the other guys in that thread. Also dhaval1's reply to a thread that I randomly came by also helped. And I'd also like to thank the guys from those threads and other places here on XDA who got these files onto the forums for use!
Also, HUGE thanks to CapnChaos and jeanr464 for solving the MMS problem!
It would probably be a good idea to omit
J D A said:
omitted.
Click to expand...
Click to collapse
from your tutorial.
.torrented said:
It would probably be a good idea to omit
from your tutorial.
Click to expand...
Click to collapse
Thanks for the advice. The Rezound tutorial also stated that so I didn't think it'd be a real issue. I updated the guide though. Hopefully some people will find it of use.
I have been trying to do this for the past 3 weeks! Wow, it's a damn shame I caved and paid someone to do it, you really broke it down to a science!
JDA, can you post screen shots from dfs of of the data and mobile ip tabs? Blank out any of your numbers or other personal information.
gpz1100 said:
JDA, can you post screen shots from dfs of of the data and mobile ip tabs? Blank out any of your numbers or other personal information.
Click to expand...
Click to collapse
I never used DFS for this but here are the screenshots from those tabs.
JDA, thanks for the posting. Seems a bit different than other profiles used, but also works.
Thanks JDA, a quick question does this mean we need the stock ROM only for flashing the prl, and after that we can move to any other rom as long as it support Verizon network?
Sent from my DLX using xda app-developers app
I am curious how similar the process is for flashing to Selectel? I have seen a few people around say that a phone setup to work on page plus should work without modification on selectel but I also understand page plus is prepaid and selectel is postpaid in terms of network access so I wonder about that a little.
Sorry for the late reply, hopefully you already did this though so I'll make an update for future users:
I was wrong. You only need a ROM with the stock phone app. I'm on ViperDNA and I found I can easily enter diag mode. I stated that because with past experiences on my Rez, diag mode could not be accessed through Cyanogenmod 10.1's dialer (so I had to revert to stock).
fordry said:
I am curious how similar the process is for flashing to Selectel? I have seen a few people around say that a phone setup to work on page plus should work without modification on selectel but I also understand page plus is prepaid and selectel is postpaid in terms of network access so I wonder about that a little.
Click to expand...
Click to collapse
No difference in flashing to either...........
Viper
MMS Problem
I used this guide to flash my HTC Droid DNA to PagePlus With 3G and Talk and Text. I cannot get MMS to work for some reason. Can someone help me.Thank you in advance.
Thanks In Advance.
Talk- Works
Text- Works
3G- Stable/2.42 MBPS Lowest Speed
MMS- Not Working
Thanks for the guide.
I can't get data working and I'm having trouble getting my sim to activate. The first time I tried, it tried to activate on its own like you said, but failed (I think because I accidentally had my old phone still on and I did an esn swap). I thought maybe I just ruined that sim so I bought another blank sim. But when I put it in it just said "Preparing sim card..." and didn't try to activate.
I'm new to 4g phones, so if anybody could give me any clues how to get data working I'd appreciate it.
Give it some time to auto activate
Sent from my HTC6435LVW using XDA Premium 4 mobile app
basito723 said:
Give it some time to auto activate
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How long should it take? Do I need to re-run the initial phone setup to make it activate?
And to your question, did you try the 8sms application here with the PagePlus setttings? http://forum.xda-developers.com/showthread.php?p=41195590#post41195590
Yes I used 8sms and don't run the initial phone setup again
Sent from my HTC6435LVW using XDA Premium 4 mobile app
If that dosent work reflash it without the SIM in
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Thanks anyway
Sent from my HTC6435LVW using XDA Premium 4 mobile app
CapnChaos said:
How long should it take? Do I need to re-run the initial phone setup to make it activate?
And to your question, did you try the 8sms application here with the PagePlus setttings? http://forum.xda-developers.com/showthread.php?p=41195590#post41195590
Click to expand...
Click to collapse
I actually got 3g working without going through the activation process. I used DFS to match my settings to post #6 in this thread (replacing my phone number with the blurred out sections in the pics). I left the keys sections blank, but somehow my 3g still works. I thought the keys would be necessary and that I'd have to get them from a donor phone, but everything works without them.
How do you get MMS to work??
CapnChaos said:
I actually got 3g working without going through the activation process. I used DFS to match my settings to post #6 in this thread (replacing my phone number with the blurred out sections in the pics). I left the keys sections blank, but somehow my 3g still works. I thought the keys would be necessary and that I'd have to get them from a donor phone, but everything works without them.
Click to expand...
Click to collapse
I need help with MMS and how to edit APN-CONF.xml and where that file would be. When i send a MMS it states "invalid destination address"