USB internet stick and the Prime - Asus Eee Pad Transformer Prime

My father-in-law just got his Prime and he`s wondering if there is a way to make his USB internet stick work with the Prime by plugging it directly into the USB on the keyboard dock. The internet stick is made by ZTE and the model is ZTE MF668. I don`t think that it would work but I`m pretty new to Android so I wanted to make sure that I was right. Any ideas?
Thanks
Jeff

Jeff1192 said:
My father-in-law just got his Prime and he`s wondering if there is a way to make his USB internet stick work with the Prime by plugging it directly into the USB on the keyboard dock. The internet stick is made by ZTE and the model is ZTE MF668. I don`t think that it would work but I`m pretty new to Android so I wanted to make sure that I was right. Any ideas?
Thanks
Jeff
Click to expand...
Click to collapse
I think its more like to work than not. USB host support is pretty ubiquitous
TF201 | XDA Premium

I doubt it due to the lack of driver support. It'd be similar to not being able to connect a printer to the USB port.

I think it might. But if he has both why doesn't he just try it.

He has tried it and didn`t seem to get anything coming in. But I guess he was wondering if there was a setting that could be changed or an app that could be downloaded I guess.
Jeff

The ZTE MF668 requires OS-specific drivers to work, so unless the company that made it (ZTE? Huawei?) has made some Android drivers (don't look, cuz they haven't) it is unlikely that you will be able to get it to work.

Ok thanks for letting me know for sure. It`s pretty much what i thought but being so new to Android I wanted to make sure.

Related

[Q] USB to Ethernet Adapter

Has anyone tried to use one. Heard the Viewsonic G Tablet can do some. Needing a solution to cable it. Thanks.
Sent from my Desire HD using XDA App
I guess in theory, one of the ones mentioned in this article might work.
In one of my rooms the wifi coverage is very low - so it is tempting to try to get one of them to test.
tried a sabrent one, no luck
dude2k5 said:
tried a sabrent one, no luck
Click to expand...
Click to collapse
Need one that is supported by linux or drivers will for sure be the doom. The question is only wht support has actually been included by Asus.
This thread looked interesting to me, thanks OP.
I have tested some of these before in another project. I found differences in even what was supposed to be the same models, weird stuff. I did find a few models that worked on LINUX, but I will have to dig around to find them.
A good test might be to find a model that quasi *auto detects* and operates on a specific version of LINUX, as a prerequisite, and then test on the dock.
The amount of OS/configuration modifications to *auto detect* should me minimal or none.
Hmm, youll probably need to compile the drivers as modules and manually insert them before it might work. But its worth a shot to just try one first
I should have my hands on the Apple adapter on Tuesday.
Sent from my Desire HD using XDA App
HTCinToronto said:
Has anyone tried to use one. Heard the Viewsonic G Tablet can do some. Needing a solution to cable it. Thanks.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
i got mine working, just follow the instructions from the link below
http://forum.xda-developers.com/showthread.php?p=14747728
It's working! I connected my n900 via usb and set it to network mode.
did netcfg usb1 dhcp and got the address from dhcp.
I wonder why they didn't include ifconfig in android :S
Also, I suspect you can use usb0 (client mode port) to connect to your pc.
Confirm: Connect to LAN using USB to RJ45 on Asus Transformer?
Hi,
I just want to confirm with the previous post that you were able to connect to the internet via LAN using a USB to RJ-45 purchased from amazon. (Search for "USB 2.0 to RJ-45 Ethernet Adapter" on amazon.) Did you connect using the USB port on the dock or on the tablet itself? Thanks!
bambooman said:
Hi,
I just want to confirm with the previous post that you were able to connect to the internet via LAN using a USB to RJ-45 purchased from amazon. (Search for "USB 2.0 to RJ-45 Ethernet Adapter" on amazon.) Did you connect using the USB port on the dock or on the tablet itself? Thanks!
Click to expand...
Click to collapse
Sorry second part of the first sentence confuses me a little. Are you referring to me? I connected to my phone that has usb network mode. And I attached it to a usb port on the dock.
So I picked up the Apple USB-to-ethernet adapter (MC704ZM/A), plugged it in and no response from my Transformer. Did you guys do anything special to get yours working?
Sent from my Desire HD using XDA App
I can confirm that I tried a USB to ethernet adapter (chip seems to be ASIX ax88x72A) and it did not work on my TF. The adapter came with a driver CD and it did include drivers for android. I'm attaching them here in the hope that someone who knows what to do with these files can help.
The driver files can also be found on Asix's website. Google "asix ax88x72A android". Sorry, this board doesn't allow new members to post external links.
I really hope Google or Asus can fix this missing rather fundamental functionality in a future SW update. I don't want to carry a router around and a lot of hotels only have wired internet!
Found Android Drivers
mesquita1 said:
I can confirm that I tried a USB to ethernet adapter (chip seems to be ASIX ax88x72A) and it did not work on my TF. The adapter came with a driver CD and it did include drivers for android. I'm attaching them here in the hope that someone who knows what to do with these files can help.
The driver files can also be found on Asix's website. Google "asix ax88x72A android". Sorry, this board doesn't allow new members to post external links.
I really hope Google or Asus can fix this missing rather fundamental functionality in a future SW update. I don't want to carry a router around and a lot of hotels only have wired internet!
Click to expand...
Click to collapse
Here are some additional drivers from the manufacturer. They clam it includes Android 4.x.x Good luck
http://www.asix.com.tw/FrootAttach/driver/AX88772C_772B_772A_760_772_178_LINUX_Driver_v4.6.0_Source.tar.bz2

ICS - 3g dongle support

Wondering if anyone here has been able to use a 3g dongle using otg cable and y-cable? Does ICS have any drivers built in?
Thanks
Bump anyone?
What is an otg cable and y cable?
Otg. Cable is basically micro USB to USB cable and y cable is required in order to provide power to the device you'really using.
I'm pretty good at figuring out bad lingo but I'm not quite sure what you're trying to accomplish. Are you trying to get 3g on your touch pad or power the 3g dongle like a hotspot? I'm assuming the micro USB to USB plugs into the touchpad and part of the USB "Y" cable and the dongle into another part of the "Y" but what does the y cable plug into? Being detailed and descriptive goes a long way to getting answers on the interwebs.
Sent from my SGH-T989 using Tapatalk
Figured the people that would know if it works/how to get it to work would already know what the cables are seeing as its the same equipment required to hookup any USB device, be it a keyboard, USB flash drive or external hdd to the touchpad.
Basically I want to use the 3g dongle to get internet on the TP. To do this would require external power to the dongle as the TP doesn't have a powered USB host. Most likely require drivers as well.
wouldnt tethering to a cell phone that already has a nice data plan be much better than a franken-dongle setup?
haxin said:
wouldnt tethering to a cell phone that already has a nice data plan be much better than a franken-dongle setup?
Click to expand...
Click to collapse
At least in the US, tablet device plans tend to be cheaper than tethering plans and carriers are starting to crack down on such practices. Its a valid request.
Not really sure if its possible on the touchpad, but I know some other devices are capable of it like the Archos G9 series and some Chinese tablets so I would not be surprised if it were.
Jotokun said:
At least in the US, tablet device plans tend to be cheaper than tethering plans and carriers are starting to crack down on such practices. Its a valid request.
Not really sure if its possible on the touchpad, but I know some other devices are capable of it like the Archos G9 series and some Chinese tablets so I would not be surprised if it were.
Click to expand...
Click to collapse
I think most US carriers would be unhappy if you used a 3G USB Modem with a tablet plan since the modem could be used with a laptop too. Pretty sure it would be against ToS to do so.
In any case, if that's the route someone wants to go, then wouldn't some sort of 3G Wifi hotspot still be better than a "franken-dongle"?
gmkelly001 said:
I think most US carriers would be unhappy if you used a 3G USB Modem with a tablet plan since the modem could be used with a laptop too. Pretty sure it would be against ToS to do so.
In any case, if that's the route someone wants to go, then wouldn't some sort of 3G Wifi hotspot still be better than a "franken-dongle"?
Click to expand...
Click to collapse
Good point on both accounts. A mifi type device would probably be the way to go, less cables, more universal usage, etc. Only downsides being that its pricier than a 3G dongle and the battery life would not be as good, but it would be guaranteed to work.
Jotokun said:
Good point on both accounts. A mifi type device would probably be the way to go, less cables, more universal usage, etc. Only downsides being that its pricier than a 3G dongle and the battery life would not be as good, but it would be guaranteed to work.
Click to expand...
Click to collapse
Yeah, i tether via wifi to my android phone all the time, i also use it as an external gps receiver for my touchpad. It just seems much easier, i'm already paying for the data plan why the hell should i pay some ripoff carrier another 30 bucks a month for data on my tablet. This would however be nice to see if an external dongle will work.
all valid points. I currently tether to my phone as required, however work has issued me with a 3g/4g(LTE) usb dongle that i would like to be able to use (in addition to all the other 3g dongles i have lying around).
I've seen the wifi adapters on ebay that you can just plug the usb dongles into, but to avoid shelling out extra $$ i thought i'd see if there was any in-built or easily implemented support for usb dongles.
Having seen the cheap chinese/ebay tablets running GB with usb dongle support i figured surely there must be drivers out there that could be adapted to work with ICS.
ba114 said:
all valid points. I currently tether to my phone as required, however work has issued me with a 3g/4g(LTE) usb dongle that i would like to be able to use (in addition to all the other 3g dongles i have lying around).
I've seen the wifi adapters on ebay that you can just plug the usb dongles into, but to avoid shelling out extra $$ i thought i'd see if there was any in-built or easily implemented support for usb dongles.
Having seen the cheap chinese/ebay tablets running GB with usb dongle support i figured surely there must be drivers out there that could be adapted to work with ICS.
Click to expand...
Click to collapse
Looks like someone did it with a wired dongle for the Touchpad...
http://forum.xda-developers.com/showthread.php?t=1552102
So maybe someone could do the same for a 3G dongle?
And it also looks like there's a way to a 3G dongle working with an Asus Transformer on Honeycomb...
http://forum.xda-developers.com/showthread.php?t=1151097
although it takes quite a few steps and doesn't work on ICS yet.
I also found this...
http://it-depot.net/pages/3G_Setup
But the guide doesn't mention what tablet or version of ICS this should work on. On my Touchpad running CM9 nightlies I don't have a Mobile Networks options. Between the vagueness of the guide and CM9 being an alpha, it's kinda hard to figure out what the issue might be.
I guess your original question was, has someone made this possible for a Touchpad already? And it seems to me that the answer is no, but it eventually might be done. It looks like you're not alone in wanting to get a 3G USB modem to work on an android tablet, if that gives any hope.
Thanks gmkelly.
I'd seen those links before and tried to find that mobile networks option. From what i can tell, it looks like ICS might actually have some drivers built it, but whether they are in CM9 is a different question.
I also kept a close eye on the wired lan adapter thread posted yesterday (?). If a wired adapter can be implemented, maybe it wouldnt be too much effort on getting the wireless 3g implemented...
Forget US carrier restrictions. This feature would be an absolute godsend in a country like Nigeria where a 3G dongle is pretty much the best way to get online in most places.
The only issue I see with this is that a lot of 3G dongles are only Windows / Mac compliant. Meaning that they hate linux or anything that isn't Winbl0wz XP (or 7) or Mac OS X 10.5+. And Android definitely doesn't fall under that category. Just like consoles (which I have seen people try and use the dongles for, too).
However, if you CAN get them to work, you'll be a hero in the tablet community.
3g dongle works with hp touchpad now. Check Josh's PPPWidget forum. I am using a ZTE MF110 with it on CM9 and get better performance than on a win7 machine.

USB device not recognized

I did a search and found that no one has posted this problem on this forum - I'm the only one ??
My prime use to hooked up with my PC with no problems. At some point recently (I'm thinking the recent ICS update) my PC & Prime had a parting of ways. Now I plug in the Prime and get 'USB device not recognized'.
Downloaded and ran Asus Sync hoping that a driver vanished but no luck.
I'm running Windows 7 (64 bit). Has anyone else noticed the same problem and if so - how did you fix it ?
Thanks
I have three computers, and none of them even recognize my prime anymore, not even in Device Manager. This started after I got it back from RMA.
I, myself, am not particularly concerned about it, since I'm just waiting for the Infinity to come out; the Prime I will just pass on to a family member. If the Infinity was going to be released in the far flung future, I'd send it back.
NewbieKeepItSimple said:
I did a search and found that no one has posted this problem on this forum - I'm the only one ??
My prime use to hooked up with my PC with no problems. At some point recently (I'm thinking the recent ICS update) my PC & Prime had a parting of ways. Now I plug in the Prime and get 'USB device not recognized'.
Downloaded and ran Asus Sync hoping that a driver vanished but no luck.
I'm running Windows 7 (64 bit). Has anyone else noticed the same problem and if so - how did you fix it ?
Thanks
Click to expand...
Click to collapse
Hey I just have experienced the same issue after upgrading to ics, bt it got solved after installing the USB storage mod, check it on nexus one's themes and apps sec, I hope that will help u
Sent from my HTC Nexus One using XDA
AC DC said:
Hey I just have experienced the same issue after upgrading to ics, bt it got solved after installing the USB storage mod, check it on nexus one's themes and apps sec, I hope that will help u
Sent from my HTC Nexus One using XDA
Click to expand...
Click to collapse
Link: http://forum.xda-developers.com/showthread.php?t=1389375
Did you try this for the Prime ? I did not see the Prime on the supported list.
Thanks
I Have the problem as well...thought it was the cable but half happy to see it probably isnt
hey everyone, and I'm so happy to see this thread, but have you guys had similar issues to Mines?
Hello Everyone, I'll try to short and to the point. I've been searching xda/google/androidcentral on and off since maybe early Februrary and still nothing, maybe someone has some awesome insight.
So my computer won't detect my TP anymore for file transfer. It did maybe the first month or so though.
Here's what I've tried so far, with no luck.
- Different Computers - Different Cables - New Asus Brand OEM USB Cable - Aftermarket USB Cable - Different USB Ports (Front and Back of Computer) - USB Debugging Mode - Uninstalled Drivers on my PC to try and get table to re-install it. - Factory Reset (multiple times with and without auto-backup) - Connecting From KeyboardDock to Computer
I convinced my cousin to buy a TP and Dock the other week so I also got to try some extra stuff.
- I plugged His TP with His USB cable to His PC and it connected fine.
- I plugged His TP with His USB cable to MY PC and it connected fine.
- I plugged MY TP with His USB cable to His PC and it wouldn't detect.
- I plugged MY TP with His USB cable to MY PC and it wouldn't detect.
I also tried his TP with my USB cables (both oem and aftermarket) on my PC and it connected fine.
Here's Some additional Info, that may be helpful.
I was previously able to connect to my HDMI ports on my TV via micro HDMI, but that does not work anymore either.
I've seen a few people mention serial numbers, so here's some Info, not sure if it's the correct info.
My TP - TF201-B1-CG - S/N starts with a "B" His TP - TF201-B1-GR - S/N starts with a "C"
I thank you all for your time and any insight is much appreciated.
Called ASUS support - I'm the first that they have ever heard that problem. They suggested a factory reset but first I must back the data up. Never done a factory reset, I hope Voodoo will keep the root.
When I finally try it - I'll let you know what happens.
Cool thanks NewbieKeepItSimple, I hope we get this sorted ou!
Hey everyone, I have some more interesting info regarding the USB issue. I didn't want to suspect this as a problem, but yea it looks like it may be an actual bad port on the TFP itself.
My reasoning is that I got my free GPS dongle in the mail today and it won't work. Anyone else test this yet?
Another Question, as far as RMAs go, do we HAVE to call in? Anyone know for sure? I know there's forums, but trying to kill 2 birds with 1 stone.
softbox said:
Hey everyone, I have some more interesting info regarding the USB issue. I didn't want to suspect this as a problem, but yea it looks like it may be an actual bad port on the TFP itself.
My reasoning is that I got my free GPS dongle in the mail today and it won't work. Anyone else test this yet?
Another Question, as far as RMAs go, do we HAVE to call in? Anyone know for sure? I know there's forums, but trying to kill 2 birds with 1 stone.
Click to expand...
Click to collapse
But you guys are charging fine? Just not connecting to the PC's? Have you had a good look at the connectors both on the cable and the Prime, nothing obvious? You all have uninstalled and re-installed the drivers right? Or maybe tried the universal naked driver utility?
buxtahuda said:
But you guys are charging fine? Just not connecting to the PC's? Have you had a good look at the connectors both on the cable and the Prime, nothing obvious? You all have uninstalled and re-installed the drivers right? Or maybe tried the universal naked driver utility?
Click to expand...
Click to collapse
Yep, charges fine. I couldn't see anything obviously wrong with cables and connectors.
As far as trying universal naked driver, I'm pretty sure drivers aren't the issue since I tried a whole different TFP with the same computers and cables (stated above) and it connected and installed the drivers correctly.
softbox said:
Yep, charges fine. I couldn't see anything obviously wrong with cables and connectors.
As far as trying universal naked driver, I'm pretty sure drivers aren't the issue since I tried a whole different TFP with the same computers and cables (stated above) and it connected and installed the drivers correctly.
Click to expand...
Click to collapse
My Prime was sync'd at work with my contacts and I put movies on from my home PC. Now neither PC can communicate with the Prime.
There is somethings with the Prime and USB ports that seem a little goofy. I have a USB memory on my keychain that I use for my work files. One of the things I wanted to do with the Prime is access and work on my files during business trips. The work USB memory is 4GB Fat 32 but the Prime can't see it even though all other computers can see it. Plug in an older 2GB memory - the Prime can see it. Plug in my Apple iPhone - the Prime can see it. Plug in some other USB memories no problem but my work USB is invisible.
I really can't see any reason for the Prime to suddenly become invisible to computers but I will try the factory reset once I get my memory 64GB SDcard next week.
NewbieKeepItSimple said:
My Prime was sync'd at work with my contacts and I put movies on from my home PC. Now neither PC can communicate with the Prime.
There is somethings with the Prime and USB ports that seem a little goofy. I have a USB memory on my keychain that I use for my work files. One of the things I wanted to do with the Prime is access and work on my files during business trips. The work USB memory is 4GB Fat 32 but the Prime can't see it even though all other computers can see it. Plug in an older 2GB memory - the Prime can see it. Plug in my Apple iPhone - the Prime can see it. Plug in some other USB memories no problem but my work USB is invisible.
I really can't see any reason for the Prime to suddenly become invisible to computers but I will try the factory reset once I get my memory 64GB SDcard next week.
Click to expand...
Click to collapse
that's so frustrating. factors reset didn't work for me but I'm wishing luck to you.
Ok.. something to try before going directly to wiping your Prime...
First, try plugging it into a different USB port. This will cause the PC to try and load a new driver.
If that fails, click Start, right click on Computer and select Manage. Look for an entry called "Portable Devices" and under that "Transformer Prime TF201".
If you don't have that at all, then the system has failed to identify the device entirely.. try it with another PC (take it to a Best Buy and plug it in.. ). If it fails there, then something has changed in your Prime. If you've flashed the ROM, it's possible that's the problem.
If you DO see the entry, but the PC isn't recognising it - right click on the entry for the Prime and select 'Uninstall'. On the dialogue box that pops up, check "Delete the driver software for this device" and let it do its thing.
Unplug the Prime, then plug it back in. It should download a new driver for the Prime. Hopefully this will fix the problem.
I've never heard of an Android device's ADB USB port failing - it's entirely possible of course - but we have five here.. which is pretty amazing.
softbox said:
that's so frustrating. factors reset didn't work for me but I'm wishing luck to you.
Click to expand...
Click to collapse
I'm not holding out much hope either but who knows. The ASUS is rooted but I haven't flashed anything. Another tack I tried is using the just the tablet then keyboard connection but both give the same results.
If I'm connecting to two different spots that on the Prime (dock/Tablet) and there are two different interfacing chip sets involved. Maybe it is a software bug that is screwing up how the Prime addresses the USB (protocol).
NewbieKeepItSimple said:
I'm not holding out much hope either but who knows. The ASUS is rooted but I haven't flashed anything. Another tack I tried is using the just the tablet then keyboard connection but both give the same results.
If I'm connecting to two different spots that on the Prime (dock/Tablet) and there are two different interfacing chip sets involved. Maybe it is a software bug that is screwing up how the Prime addresses the USB (protocol).
Click to expand...
Click to collapse
yea i'm not rooted either. and same goes for me, neither of my tablet connect or my connection through the dock works =\
NewbieKeepItSimple said:
If I'm connecting to two different spots that on the Prime (dock/Tablet) and there are two different interfacing chip sets involved. Maybe it is a software bug that is screwing up how the Prime addresses the USB (protocol).
Click to expand...
Click to collapse
hmm even if it was 2 different chip sets it'd still have to go through the main one. it'd be great if it was software based issue
don't mean to self bump but wanna see if there's more like us.
Mine was doing the same thing, now im stuck in the clockwork mod bootloop and cant communicate with my device to unbrick it.
htcdesirezgeorge said:
Mine was doing the same thing, now im stuck in the clockwork mod bootloop and cant communicate with my device to unbrick it.
Click to expand...
Click to collapse
that sounds so much more worse than mines

[Q] USB to Ethernet

How hard would it be to get something like this to work with the Rezound?
I know with the Galaxy Nexus you can plug a microUSB to USB adapter in and use flash drives and external hard drives if you're using the right kernel.
I'm wanting something like this because it would be nice to plug into the network at work and ping printers and stuff like that with my phone instead of finding a computer and logging in.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812196235
Not in Gingerbread
USB host mode is only supported in Honeycomb or above, so this won't be possible without ICS on this phone.
I'm not sure if anyone has made an ICS kernel that supports USB host mode.
Also, in addition to compatible software, the phone also needs compatible hardware, which the Rezound might not have.
If you don't have wireless access buy an airport express.
wlmeng11 said:
USB host mode is only supported in Honeycomb or above, so this won't be possible without ICS on this phone.
I'm not sure if anyone has made an ICS kernel that supports USB host mode.
Also, in addition to compatible software, the phone also needs compatible hardware, which the Rezound might not have.
Click to expand...
Click to collapse
Thanks for your input
GrayTheWolf said:
If you don't have wireless access buy an airport express.
Click to expand...
Click to collapse
And this would defeat the purpose completely.
circa881 said:
Thanks for your input
Click to expand...
Click to collapse
Apparently Chainfire tested a bunch of devices and listed the Rezound as incompatible.
http://usbhost.chainfire.eu/
He tested both Gingerbread and ICS, and none of them worked.
(Although those are all probably stock or modified Sense kernels, so maybe there's hope for AOSP? )
circa881 said:
And this would defeat the purpose completely.
Click to expand...
Click to collapse
How?
He said USB to Ethernet. Apparently he only has a hard wire connection. So, buy an airport express to make that hardwire wireless.
GrayTheWolf said:
How?
He said USB to Ethernet. Apparently he only has a hard wire connection. So, buy an airport express to make that hardwire wireless.
Click to expand...
Click to collapse
It doesn't totally defeat the purpose, but considerably complicates things. I'd sooner carry a laptop than break out a wireless router, fire it up, make sure it won't interfere with anything on the wired or wireless side (could be tough to do if you have to log in wireless), then ping/ssh/<your-protocol-here> through that device to get to the device I'm looking for.
With a USB dongle, plug it into the phone, into the wall, and do what you need to do.
Yeah the USB thing would be nice.
You are over complicating the router. Most routers are plug and play nowadays so Ethernet into existing network, and power is all you need with wireless freedom.
It would be even more to carry with me and more money than I'm willing to spend. I was just curious to know how hard it would be to plug my phone straight into the network so I can ping printers or telnet into stuff at work
circa881 said:
It would be even more to carry with me and more money than I'm willing to spend. I was just curious to know how hard it would be to plug my phone straight into the network so I can ping printers or telnet into stuff at work
Click to expand...
Click to collapse
Ethernet word be nice, but it doesn't exist. I was just providing an alternative.
I would be careful about plugging things into the work network. Some IT managers are rather...protective of their domains and set up extensive security, to the point where the particular port you plug into may shut down if it recognizes an unauthorized device. I work for the Marine Corps, and aside from the fact it's a punishable offense to connect an unauthorized device to the Navy/Marine Corps Intranet (and attached information systems), the switches will immediately disable a port with an unrecognized device connected.

[Q] change usb settings??

Hello,
I bought an external keyboard that connects via the mini usb port. It didn't work, but found a suggestion:
When I first connected my adapter that came with my tablet to the keyboard adapter I was very disappointed that nothing happened. I tried several different browser pages, but nothing happened. I read reviews on here and noticed on about that someone mentioned they changed their USB settings and their keyboard finally started working. So, I immediately went to my Settings, Advanced Settings, and then USB BUS MODE and changed it from DEVICE mode to HOST mode and VOILA - the keyboard immediately started functioning
Click to expand...
Click to collapse
I tried to find where to change the usb settings to host but couldn't find the area. Is there anywhere I can find this? I am using the AOPK Rom. Thanks for any help!
OTG not in any of the Nook Tablet yet
OTG is not implemented yet on the stock nor current cm10 roms based on what I have asked in this forum for Nook Tablet. I know you can do this with the new nooks that have monochrome display. May I ask where did you read this article?
bulsatar said:
Hello,
I bought an external keyboard that connects via the mini usb port. It didn't work, but found a suggestion:
I tried to find where to change the usb settings to host but couldn't find the area. Is there anywhere I can find this? I am using the AOPK Rom. Thanks for any help!
Click to expand...
Click to collapse
yep, it was in a review of the product on amazon. here is a link to the product:look at couple reviews down. I am happy to wait just want to make sure that I will be able to use it soon
bulsatar said:
yep, it was in a review of the product on amazon. here is a link to the product:look at couple reviews down. I am happy to wait just want to make sure that I will be able to use it soon
Click to expand...
Click to collapse
Were you reading the review for the Nook Color with working usb otg? It does work for that tablet, not the NT though.
Sent from my AT100 using xda premium
I wasn't looking specifically for how to get it working on the tablet, just looking in general for how to do it in android. Hopefully they implement the otg soon
I just downloaded the new cm10 (snappy and no more reboot/sdcard lost errors!!) but there wasn't anything about the type of usb connection in that one either...
Am I not going to be able to use this keyboard? Will I have to break down and buy a price blue tooth one????
bulsatar said:
I just downloaded the new cm10 (snappy and no more reboot/sdcard lost errors!!) but there wasn't anything about the type of usb connection in that one either...
Am I not going to be able to use this keyboard? Will I have to break down and buy a price blue tooth one????
Click to expand...
Click to collapse
At this time the NT does not have usb otg on any ROM, it may in the future, but if and when is not known at this time. The NT will never have bluetooth, Never. It has been well documented why, do a search and read. So a BT keyboard will never work. Is it really that hard to type with your thumbs?
Sent from my AT100 using xda premium
It isn't really a matter of difficulty, it is a matter of duration. I didn't want a full laptop and I like the android os so wanted to try a tablet with a keyboard for my mobile computing needs. I am do a good amount of typing (chapters for novels and such) and prefer a keyboard. I was using my phone before and it was a lot slower than what I can do with a keyboard and got tiring after an hour or so. It isn't detrimental that I can't use a keyboard, just desired.
bulsatar said:
It isn't really a matter of difficulty, it is a matter of duration. I didn't want a full laptop and I like the android os so wanted to try a tablet with a keyboard for my mobile computing needs. I am do a good amount of typing (chapters for novels and such) and prefer a keyboard. I was using my phone before and it was a lot slower than what I can do with a keyboard and got tiring after an hour or so. It isn't detrimental that I can't use a keyboard, just desired.
Click to expand...
Click to collapse
I bought a Toshiba Thrive 32gb off craigslist for $200. I am now running CM10. I bought it for those exact reasons. It has full sized usb, full sized hdmi, micro usb, full sized sd card expandable to 128 gb, bluetooth capable, gps, 10.1" screen. I use a mouse through usb, bluetooth keyboard, and I hook it up to my TV or
computer monitor and is performs really well as a portable computer with little cost involved.
Sent from my AT100 using xda premium
lol, after spending 150 on the tablet I think that I am going to skip buying another, however I have started looking at other virtual keyboard options and will be trying out a few to see if they can fill the gap until/if they activate the usb otg. Thanks for the info and I will reply if I find a keyboard that I like enough to be useable as a touch typer!!

Categories

Resources