Why is it that the EVO and EVO 3D just @#$%^&% love to turn themselves on and unlock themselves in my pockets? Isn't the proximity sensor supposed to let the OS know the thing is in my damned pocket?
For some reason it seems to like my Levi's more than any other pockets. When I wear dress slacks it's not quite too quick to wake and play.
I'm becoming severely tired of being reminded that I didn't put the phone in my pocket screen-side out by the fact that my leg is about 150-degrees, only to pull the phone out of my pocket and find that I'm about 40 over par in a game of golf.
What the hell?!?!?!?
Sounds like a defect.... Try makei.g sure the power button is face up? If u have volume buttons set to wake ur screen unset them?
Sent from my PG8610000 using Xparent Red Tapatalk
A defect that both of my EVO 4Gs and my EVO 3D have?
Basically if anything presses the power button or wakes the screen when it's facing my leg, the simple fact that there's a capacitive transfer between my leg and the screen through a few layers of cloth can cause it to slide unlocked. (try unlocking it with your finger through your shirt, for example, it works just fine.)
If I put more security on the lock, it stays locked, but that's beside the point. The phone/OS should KNOW it's in a pocket and disallow that action altogether.
Well it doesn't... Touch screens work on heat, and the proximity sensor only seems to shut the screen off in q phone call.
I have never really had this problem(it happens once in a blue) that's y I thought it may be defective, it sounds like your best bet is the lock, that said I always have my phone in a otter box, dunno if it helps...
Sent from my PG8610000 using Xparent Red Tapatalk
Just put a passcode on it, it's not too much of a problem then. Of course, you'd lose a little battery life but not so much as when you find out you're half way through Tiger Woods' new game.
paallday said:
Well it doesn't... Touch screens work on heat, and the proximity sensor only seems to shut the screen off in q phone call.
I have never really had this problem(it happens once in a blue) that's y I thought it may be defective, it sounds like your best bet is the lock, that said I always have my phone in a otter box, dunno if it helps...
Sent from my PG8610000 using Xparent Red Tapatalk
Click to expand...
Click to collapse
Touch screens to not work on heat. A capacitive screen only needs a conductive surface to work. Just an FYI.
Actually its both heat is for fine tuneing and
Conductivity is big movement, try useing a nickel it will follow the motion well but be choppy now heat said nickel n chop is gone
Ps pennys don't work at all what's up with that
Sent from my PG8610000 using Xparent Red Tapatalk
Install leedroid tweaks, set you screen button to something like the camera button, never complain again.
paallday said:
Then y dosent a penny??? It is heat fyi
Sent from my PG8610000 using Xparent Red Tapatalk
Click to expand...
Click to collapse
Read up on Capacitive touch screens and then come back.
paallday said:
Actually its both heat is for fine tuneing and
Conductivity is big movement, try useing a nickel it will follow the motion well but be choppy now heat said nickel n chop is gone
Ps pennys don't work at all what's up with that
Sent from my PG8610000 using Xparent Red Tapatalk
Click to expand...
Click to collapse
Really??? I would love to see any kind of technical sheet showing that a capacitive screen uses heat in any way shape or form to do anything. If I am wrong, I will not edit my post to change what I said (like you did) but will post a public apology to you stating that I was wrong.
---------- Post added at 05:08 PM ---------- Previous post was at 05:05 PM ----------
Also, I have the same issue that the OP has, once in a while, I will take my phone out of my front pocket of my khakis and I will have 5 apps open and a call open to my wife or something of that nature. I have learned to face the screen out instead of in which seems to help (if I remember to actually do it).
I edited it because I first tried it with a penny and it did not work at all then I tried it with a quarter and it worked and was very choppy like it was wasnt touching it properly then I heated the quarter and it worked fine. I don't no y this did this but it did...
I was wrong at first, because o thought it was all heat, and I did say that, but I was also posting what I had figured out, that's all.
Sent from my PG8610000 using Xparent Red Tapatalk
paallday said:
I edited it because I first tried it with a penny and it did not work at all then I tried it with a quarter and it worked and was very choppy like it was wasnt touching it properly then I heated the quarter and it worked fine. I don't no y this did this but it did...
I was wrong at first, because o thought it was all heat, and I did say that, but I was also posting what I had figured out, that's all.
Sent from my PG8610000 using Xparent Red Tapatalk
Click to expand...
Click to collapse
No biggie...I think I might try the quarter trick to see if maybe a heated quarter has better conductive properties as an experiment becuase I am really bored.
Also an heat senseing touch screen does exist and here is the spec sheet (although deffinatly an inferior technology I new I had seen it somewhere...)
http://www.gsmarena.com/samsung_e900-1508.php
Sent from my PG8610000 using Xparent Red Tapatalk
paallday said:
Also an heat senseing touch screen does exist and here is the spec sheet (although deffinatly an inferior technology I new I had seen it somewhere...)
http://www.gsmarena.com/samsung_e900-1508.php
Sent from my PG8610000 using Xparent Red Tapatalk
Click to expand...
Click to collapse
Ummmmmmm.... Not even a touch screen.
Sent from my PG86100 using xda premium
I prefer to keep mine on a holster. Alot of folks put there phone in there back pocket and forget and sit down on it and there ass bone smashs the glass lol.
Anyway's pocket carry shouldn't be turning ur phone on lmao.
I would try another rom or kernel if no luck and you try a stock kernel and rom and still have issues take the sucker back to sprint.
Just put a otterbox commuter case on it. Its a 2 part case soft rubber skin and a hardshell over it. You gotta put a little more effort in pressing the buttons, it never comes on in my pocket, I even got the volume buttons set to wake.
xeper said:
Why is it that the EVO and EVO 3D just @#$%^&% love to turn themselves on and unlock themselves in my pockets? Isn't the proximity sensor supposed to let the OS know the thing is in my damned pocket?
For some reason it seems to like my Levi's more than any other pockets. When I wear dress slacks it's not quite too quick to wake and play.
I'm becoming severely tired of being reminded that I didn't put the phone in my pocket screen-side out by the fact that my leg is about 150-degrees, only to pull the phone out of my pocket and find that I'm about 40 over par in a game of golf.
What the hell?!?!?!?
Click to expand...
Click to collapse
+1 NICE!! EXACT SAME THING happens to me! If I put the lock pattern on it, it stays locked but then the emergency calling gets activated! LOL!
I've never had this happen.. and I purposefully make sure to face the screen of my phone towards my leg, as I managed to break a screen with it facing out and something poked into it. had it been facing my leg it would've been fine.
Did u read????? cuz it deffinatly has a heat senseing touch pad such is the exact thingy wanted to c....
Sent from my PG86100 using Xparent Red Tapatalk
paallday said:
Did u read????? cuz it deffinatly has a heat senseing touch pad such is the exact thingy wanted to c....
Sent from my PG86100 using Xparent Red Tapatalk
Click to expand...
Click to collapse
Yeah, I am going to just stop arguing with you as you are a little out of your league on this one and it is way off topic from the OP. If you want to continue our debate on this, I am more than willing if you create a new thread.
Related
Anyone else having light leak out at the bottom of the phone where the glass and plastic meet?
Sent from my PG86100 using XDA Premium App
I have the same thing with mine. I had the same deal with the 4G so I'm use to it.
Sent from my PG86100 using XDA App
yes, there are a few threads already about this issue. some people are saying it is just the reflection of the bright ass lights on the heptic buttons bouncing off the lip of the case but i don't think it is. if i put something in between the buttons and the bottom of the phone i still see it. it doesn't bother me one bit. u have to be really anal to have this be a big issue.
Yea, I didn't think much of it. Didn't notice it till tonight. Sorry about the repost didnt see a main thread about it. = / I think I kinda like it tho, it rounds out the bottom of the phone. Is sorta a dock for the buttons. =}
Sent from my 3vo!
sand1303 said:
yes, there are a few threads already about this issue. some people are saying it is just the reflection of the bright ass lights on the heptic buttons bouncing off the lip of the case but i don't think it is. if i put something in between the buttons and the bottom of the phone i still see it. it doesn't bother me one bit. u have to be really anal to have this be a big issue.
Click to expand...
Click to collapse
Not really a issue for me its due to the bright ass keys I know what light leakage is I had it once on a refurbished EVO in the past. Happy the 3d no issue for me also the tpu case seems to work really well with it .
Stops that funky ass rattle u would get when typing on the on screen keyboard due to the camera button . First time I heard it was hoping it wasn't my glass on the screen coming apart had that happen on the EVO glue wasnt that good.
Tries looking this up but nothing. My phone has been pretty good since I picked up a new one Friday. Today its extremly humid in Georgia, to the point u step outside and instantly sweat...my lock screen has frozen up twice in the last 2 hours, can this be from the high humidity? I have to do a battery pull to reboot it and its fine.
Sent from my PG86100 using XDA App
phyba said:
Tries looking this up but nothing. My phone has been pretty good since I picked up a new one Friday. Today its extremly humid in Georgia, to the point u step outside and instantly sweat...my lock screen has frozen up twice in the last 2 hours, can this be from the high humidity? I have to do a battery pull to reboot it and its fine.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Sound like your cpu is overheating. Humidity shouldn't really be a factor.
Also, you could try deleting /data/dalvik-cache and rebooting.
U could be right...its about 100 degrees out. The "feels like" temp says 105... Had the phone in my pocket and it did feel pretty warm to the touch.
Sent from my PG86100 using XDA App
I live in jacksonville,fl where its even more humid. Never had a problem
Sent from my 3rd Dimension of Evolution
Well I work for FedEx and had my phone in my pocket so I think sweat could of played a part.
Sent from my PG86100 using XDA App
phyba said:
Well I work for FedEx and had my phone in my pocket so I think sweat could of played a part.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Ya anything wet like wet hands sweaty hands will make your screen lock up at times not bad just wipe it off hit the power button again and your good to go not a big deal just don't drop it in the can while pinchin a loaf or your **** outta luck...
What I have noticed with my phone is if I get sweat on it, like if I hold it up to my sweaty face during a call, I can't interact with the touch screen until I clean the sweat off of it.
Take this with a grain of salt though... My current 3d is getting replaced due to other "issues".
ballr4lyf said:
What I have noticed with my phone is if I get sweat on it, like if I hold it up to my sweaty face during a call, I can't interact with the touch screen until I clean the sweat off of it.
Take this with a grain of salt though... My current 3d is getting replaced due to other "issues".
Click to expand...
Click to collapse
No issues for me even after updates love the phone also sweat water piss anything with steam will cause the touch screen to **** up wipe and your all good. D:
phyba said:
Well I work for FedEx and had my phone in my pocket so I think sweat could of played a part.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
When you said "lock up", did you mean it was completely unresponsive and frozen, or was it just the touchscreen that wasn't working (and it would still display animations, change the clock etc)?
Because if it's just the touchscreen, then the other fellas here are right - liquids on the touchscreen kind of disable it until you wipe.
Yeah, it's sweat. All my touchscreen devices completely freak out, do random things or mostly just become completely unresponsive whenever I'm at the gym and I go to change the song or something...it's definitely sweat. wipe it off and don't worry.
I am in Houston, we have high humidity as well, temps in high 90's and fells like in the low 100's. A lot of my work is done outside and my phone stays in my front pocket of my shirt, sweaty, hot, humid. No issues as of yet, but I am now worried about it, thanks j/k
High humidity and screen protectors have always been bad combinations for me.
Sent from my PG86100 using XDA App
I'm also in Georgia. Haven't had this happen to me, although today truly did suck. Just gotta get that out there.
Sent from my PG86100 using XDA App
nabbed said:
When you said "lock up", did you mean it was completely unresponsive and frozen, or was it just the touchscreen that wasn't working (and it would still display animations, change the clock etc)?
Because if it's just the touchscreen, then the other fellas here are right - liquids on the touchscreen kind of disable it until you wipe.
Click to expand...
Click to collapse
Yea, the weather animation still played, I just couldn't unlock the phone.
Sent from my PG86100 using XDA App
So I am using my phone at night and I noticed some light bleeding. Not the usual one everyone talks about but at the very bottom of the screen where the Home button is. I can see light being emitted across the base of the screen where it meets the surrounding.
When I press the screen in on that section it goes away. So upon closer inspection I can see that the screen is slightly raised at that section and I can press down on it and it will be level but slowly raise back up causing the light bleeding.
Great. Anyway I bought this phone second hand. Do you think HTC will honor the warranty if I send it in to fix the screen?
Sent from my HTC_Amaze_4G using Tapatalk
After reading this I noticed I have this too. Im not sending mine since it doesn't bother me at all but if yours is really bad you should send it back. I don't see why they wouldn't make a warranty exchange.
Try and snap a picture, it'd help a lot more people see what the problem looks like
Goten310 said:
So I am using my phone at night and I noticed some light bleeding. Not the usual one everyone talks about but at the very bottom of the screen where the Home button is. I can see light being emitted across the base of the screen where it meets the surrounding.
When I press the screen in on that section it goes away. So upon closer inspection I can see that the screen is slightly raised at that section and I can press down on it and it will be level but slowly raise back up causing the light bleeding.
Great. Anyway I bought this phone second hand. Do you think HTC will honor the warranty if I send it in to fix the screen?
Sent from my HTC_Amaze_4G using Tapatalk
Click to expand...
Click to collapse
its normal, i have it too, so does my dad's amaze, both new phones
Hmmmm seems like another common issue. Ill try to take some pics today to show everyone what I am talking about. It amazes me, no pun intended, that I switched back to HTC from Samsung for better build quality and so far I've had so many issues already compared to the Vibrant I had before this phone.
Sent from my HTC_Amaze_4G using Tapatalk
I have the same issue, doesn't bother me though.
Sent from my HTC Amaze 4G
I also have it, Atleast i think its a light bleed, ive also thought that maybe its the light from the display just reflecting off the lifted edges/bezle??? Doesnt bother me much either anymore.
Noticed this the first day I have got the Amaze. Went back to the store, check the demo model, another new one sealed in box does the same thing, we are SOL
If I have the light enabled on the soft keys, I can see it.
Since day 1 it has been there but now it's creeping up the sides...as if the glass might simply 'pop' out one day, that's something I can reinstall.
Another vote for "visible".
thats really weird. I have a telus amaze and no problems here :/ just the normal screen bleed because of the light of the buttons.
Pics with and without the soft keys enabled, taken with my wife's amaze...which is also showing separation.
Always thought it was just a part of the design.
Sent from my HTC_Amaze_4G using XDA
I am trying to learn to appreciate it as a pretty glow during scroll menus in portrait LOL, that is what I thought it was at first HAHA!
I learned that most Amaze 4G has this issue, so I was like:
Waiting for someone's screen to just pop off now lol
Sent from my HTC_Amaze_4G using Tapatalk
Goten310 said:
Waiting for someone's screen to just pop off now lol
Sent from my HTC_Amaze_4G using Tapatalk
Click to expand...
Click to collapse
The gap has quickly moved from the bottom, up the sides.
After yeas of consistent use my HD2 case was bowed in on the sides, probably from the "stress" of 5 beautiful children...that includes twins.
lol.
The Amaze cases don't seem vulberable to such forces of massive rage grip, so hopefully no pop.
Both phones were complimentary due to a tmobile blunder, so no insurance (ocd kept my HD2 pristine, these should be fine) I'll do the 3m tape thing I've read so much about on the Sensation forums.
Now THERE'S a poorly built phone...kripes.
---------- Post added at 10:04 AM ---------- Previous post was at 10:00 AM ----------
morrislee said:
I am trying to learn to appreciate it as a pretty glow during scroll menus in portrait LOL, that is what I thought it was at first HAHA!
I learned that most Amaze 4G has this issue, so I was like:
Click to expand...
Click to collapse
but you're not forever alone, more of a trolololololol.
however it is your pretty glow, win/win!
Screen bleed is normal in the sense that it is common, but I for one do not consider it acceptable. It is not inevitable, and you can get a screen that doesn't have it.
I just tell myself that these screens are made super quickly and put in these phones super quickly, assembled by some in all likelihood poor underpaid worker.
I cut them some slack, although screen bleed absolutely bothers me. What I dislike is the lottery process. I would pay more for a screen that could guarantee no screen bleed.
Hey all, I need some help. I need a camera app or even a system tweak that will allow me to adjust the flash setting of the camera. Currently, we only have ON, OFF or AUTO. There should be an option for soft flash as well. I try taking pictures of my 5 month old niece and every photo I take of her, her eyes are closed because of the bright as hell flash we have on our phones. Any help would be appreciated.
Anyone know of any?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
How about taping a piece of white paper over the flash?
Sent from my SAMSUNG-SGH-I717 using XDA
Wow..... Next idea.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
adv1sory said:
Wow..... Next idea.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
You do realize clear tape and/or thin white paper actually does work on cameras, right? No, you wouldn't know because your an ass and dismissed an idea without even asking questions.
Sent from my SAMSUNG-SGH-I717 using XDA
Im not an ass, I just dont believe in sticking crap to my note when I'm sure there could be a software solution to the idea. NEXT!
Found this online....
HTC has an alternative API that supports this, however it's only on HTC Sense devices, and as of Gingerbread they've changed the permissions so it's only for their Flashlight app, not third party ones (unless you use root).
But on 2.2 HTC devices you can use it by writing a string to /sys/devices/platform/flashlight.0/leds/flashlight/brightness. This controls if the LED is on and how bright it is. For maximum brightness write "128\n", half brightness write "64\n". Easy to test from adb shell:
echo "128" > /sys/devices/platform/flashlight.0/leds/flashlight/brightness
And finally turn it off by writing "0\n" there.
Would Devs be able to use this info to create a system tweak to provide options for the flash intensity for the user?
adv1sory said:
Im not an ass, I just dont believe in sticking crap to my note when I'm sure there could be a software solution to the idea. NEXT!
Click to expand...
Click to collapse
The way you responded was pretty douchey, just saying. Especially since it's a valid idea. You could cut a tiny square of matte scotch tape to stick on the flash and you wouldn't even notice it on your phone.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
welchertc said:
The way you responded was pretty douchey, just saying. Especially since it's a valid idea. You could cut a tiny square of matte scotch tape to stick on the flash and you wouldn't even notice it on your phone.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Originally Posted by adv1sory
Im not an ass, I just dont believe in sticking crap to my note when I'm sure there could be a software solution to the idea. NEXT!
1-starred for ignoring fixes that you asked for, NEXT!
jwood55812 said:
1-starred for ignoring fixes that you asked for, NEXT!
Click to expand...
Click to collapse
So if I had signal issues, would you recommend I shove an antenna in my headphone jack?
adv1sory said:
So if I had signal issues, would you recommend I shove an antenna in my headphone jack?
Click to expand...
Click to collapse
Put a piece of thin tissue over the flash. This is an easy thing to do especially if you have a case on your device. Stop being a **** to people, atleast they are tryin to give you a solution to your problem. You should thank them not lash out at them.
You're right. I apologize to all that i have offended.
Now can we have a solution to this problem that doesn't require adhesive or paper or anything even close to this type of solution. Please, only software related solutions.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
In OP's defense; they did ask for software or app tweaks, not physical mods.
In defense of the other responders; using white plastic and/or cheap invisible tape IS a method used even by professional photogs to get that soft, dreamy glow. As mentioned in another post, if you have a case and are needing a semi-permanent solution, cut a small square out of a shopping bag. Use layers and different color bags to achieve the results that you're looking for.
Sent from my SAMSUNG-SGH-I717 using xda premium
The best solution is to take the picture of your niece in the day time WITHOUT Flash. Problem solved. Pictures with flash have little quality compared to daytime captures IMO.
My gf hates that I keep closing my eyes when taking pictures with flash at night. I guess I will bring sunglasses with me at all times.
-Once you go NOTE, you'd say 4 inches a Joke
Take pictures with out flash in lighted areas
then you can maybe use filters or a camera app that can give you different filters to enhance the brightness of the picture
in dark areas idk ....it is a bright flash and dont know of any apps/mods to dim the flash
and i wouldnt stick anything to my Note either
it hurts to have it in a case but i have to protect it lol
jayRokk said:
Take pictures with out flash in lighted areas
then you can maybe use filters or a camera app that can give you different filters to enhance the brightness of the picture
in dark areas idk ....it is a bright flash and dont know of any apps/mods to dim the flash
and i wouldnt stick anything to my Note either
it hurts to have it in a case but i have to protect it lol
Click to expand...
Click to collapse
And that's why I responded the way I did before. I'm OCD about keeping my phone immaculate and sticking things to it makes me cringe.
Now there has to be a solution. I prefer taking pictures with flash indoors because if not, i notice the pics turn out pixelated. (in my home atleast)
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
According one of the headlines on the main page of XDA, "Dim Capacitive Buttons on HTC Rezound Running Sense 4". A dev was able to dim the captivate buttons on the HTC Rezound and we can't figure out how to dim the flash?
adv1sory said:
According one of the headlines on the main page of XDA, "Dim Capacitive Buttons on HTC Rezound Running Sense 4". A dev was able to dim the captivate buttons on the HTC Rezound and we can't figure out how to dim the flash?
Click to expand...
Click to collapse
I don't see how they are related. You can dim the capacitive buttons on the atrix as well. I don't think there is huge demand for dimming the flash...
Sent from my SAMSUNG-SGH-I717 using XDA
Let me understand the problem
Niece is only available for pictures at night and or in dark basements...?
Solution:
Just carry a halogen flashlight with you at all times, or a candle is good too but could burn if placed too close to skin
If the flashlight is too bright for her eyes you can cut a piece of tape and cover the lense..
Now is good and your note doesn't have any glue from tape.. Problem solved, Leave a "thanks" bellow please.
NEEEEEEEEEXXXXXXTTTTTTTT!!
Send from the Noteorious BIG 5.3" Bell Canada
I dropped my Note 2 right on the face and broke the glass. The top right corner looks like a spider web with a few cracks stretching to the bottom. The display still works though . I plan to get a new glass and replace it myself. I've found quite a bit of info on how to do it.
My only question is this. When I last made a call with it the screen wouldn't come back on when I pulled it away from my face. I'm hoping it's just because of the cracks that run right across the 2 sensors at the top. Do you think it could be that or do you think maybe one of the sensors broke when it fell.
I sure don't want to have to replace the whole lcd unit. That's about $250 while the glass is about $20.
Sent from my SCH-I605 with Tweaked VZW Remix using Tapatalk 2
Hey yu... ...dirt has gotten in a few peoples proximity sensors making them not work...most people use an air compressor to clear it...broken glass.. probly a chard
Sent from my SCH-I605 using Tapatalk 2
lukegman said:
Hey yu... ...dirt has gotten in a few peoples proximity sensors making them not work...most people use an air compressor to clear it...broken glass.. probly a chard
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Hey thanks Luke. It's good to see you again. I'm actually using my Charge again for calls and texts. I find I've gotten really spoiled by my Note. The old phone feels clunky and slow.
Thanks for the good info. I'll definitely look for that when I take the busted screen off. It'll take a few days to get the parts. Wish me luck. I think I'm gonna need it. It looks like a hard job.
Sent from my SCH-I605 with Tweaked VZW Remix using Tapatalk 2
Another question. I'd like to be able to make the display stay on when I'm holding it up to my ear. Does anyone know a way to do that? I'd really like to use my Note even though the screen is broken. I don't like my Charge any more because it's too small.
Sent from my SCH-I605 with Tweaked VZW Remix using Tapatalk 2
stueycaster said:
Another question. I'd like to be able to make the display stay on when I'm holding it up to my ear. Does anyone know a way to do that? I'd really like to use my Note even though the screen is broken. I don't like my Charge any more because it's too small.
Sent from my SCH-I605 with Tweaked VZW Remix using Tapatalk 2
Click to expand...
Click to collapse
Open the phone to the dialer. Hit the menu touch button then call settings. Un check auto off during call. The setting even says turn off proximity sensor.
BoostedB18C said:
Open the phone to the dialer. Hit the menu touch button then call settings. Un check auto off during call. The setting even says turn off proximity sensor.
Click to expand...
Click to collapse
Thanks. I can't believe I never noticed that. Now I can use it til I can fix the screen. Just waiting for parts.
Sent from my SCH-I605 with Tweaked VZW Remix using Tapatalk 2
small crack with resolution prob.
I have a small crack in upper right of screen & now my sharp color is gone. It is now very dull almost like I used a photo app & added an overlay to it. Need some advice
Well I got my parts and got the tools I needed to fix my screen. The problem was I got the wrong type plastic razor blades. I got scraper blades instead. I tried it anyway and ended ripping my LCD screen. Now it's costed an extra $ 200+ for a LCD Digitizer assembly. Hopefully the next day delivery will still work even though yesterday was a holiday and the post offices were closed.
Anyway, what I'm leading up to is don't try this if everything isn't kosher. It's a tricky job.
Update: I found out they won't even ship it til Monday. I guess I don't get it back this weekend. I really don't like my old Charge after using my Note all these months.