Related
What is the main diference between 7.1.0 & 7.0.3 versions by jerpelea? I could not find any thread or post about this. I'am very happy user of CM7.0.3 k012 with no issuses at all. I've been watching development of that ROM since very early stage. Sorry for my poor english.
an update of CM..., more options and in my opinion a little faster.... still experimental
Sent from my X10 using XDA App
yohorange said:
an update of CM..., more options and in my opinion a little faster.... still experimental
Sent from my X10 using XDA App
Click to expand...
Click to collapse
Ok I'll give it a shot.
What options are new?
Here's the changelog, it's provided in every new build.
cm7-022 final
-fixed deepsleep (use new provided baseband)
cm7-021 final
-updated kernel k11
-fixed small bugs
-latest cm7 patches
cm7-020c
-disabled menukey unlock
-added usb teter
-added power profiles
cm7-020b
-fixed a litle more bugs
-reverted sensors to compatibility mode (proximity works)
-set default clock to 998 for better battery
-Added SpareParts
kernel-010
-kernel 2.6.29.6
-a lil more free ram
-removed UV for 998Mhz (seems to be the cause reboots)
-Fix FrameCap (Thank Z)
-addded all mtd partitions (Thank Z)
cm7-020a
-enabled screenlights
-added LiveWallpaperPicker (download wallpapers from market)
kernel-009
-in call volume boost
kernel-008
-compiled with new gcc 4.4.3
-changed SLAB alocator to SLOB
-enabled swap support
-added Tiny RCU
-added UV/OC
-FPS cap removed (still limited by GB)
-fixed iptables
cm7-020
-removed nano
-removed bash (using standard sh)
-fixed Dalvik crash
-fixed Droidwall
-new google apps integrated in rom
-fixed libv8 that was crashing libwebcore
kernel-007
-fixed kgsl for 1% performance gain
-fixed iptables for droidwall
-increased GPY mem from 2 to 5 mb
-removed overclock
-removed undervolt
-Replace the implementation of the fsync(), fdatasync() and sync_file_range() with no-op.
-writeback: change default dirty memory settings
-use CFS scheduler
-added cpu compiler optimisation
-moved android console at lower address
-reclaimed 1mb unused shared ram
cm7-019
-rebuilt from stable tree 7.0.3
-compiled new WIFI optimised module
-rebuilt entire device tree
-fixed vibrator
-Added SeTorch App Fork
-fixed reboot loop on battery power
-fixed webcore (hopefuly will stop wlods)
cm7-018
-fixed keyboard
-fixed WLOD (at least i hope)
-new initrd
-various fixes
-removed themes for now
cm7-017
-updated to latest 7.0.2 CM Sources
-fixed notification light on time
cm7-016a
-fixed camera app
-fixed apps2sd
-fixed wifi passwords
-fixed camera a lil more
kernel-006
-increased charging curent to 500mA (USB Recomended current)
-fixed missing modules
-reboot on battery less then 10%
-fixed OC/UV
cm7-016
-added SVG to browser
-added kernel k005
-added new wifi module
-reverted wpa_supplicant to se version
-stock CM7 ADW Launcher
-stock CM7 wallpapers
-updated to latest google maps
-WIFI
kernel-005
-various fixes
-memory relocation according to standard 8k memory map
-removed smi
-removed kgsl
-removed partialy fps cap (gb seems not to be affected)
kernel-003
-started from scratch
-Wlan fixed (use included wifi.ko)
-gps fix
-undervolt
-overclock
-cpu cahe fix
-removed cdrom
kernel-002- Q8650BSDCAALZA2140
-new usb modes (for tether)
-added APM
-removed FB Console
-enabled all freq in freq table for better scalling
-increased scaling speed between freq for better response
-new initrd
-cpu voltage tweaks
-increased freq granulatiry (128khz steps)
-added zottd cache fix (will boost performance on emulators)
cm7-015
-camera fix (less errors)
-flashlight fix
-widget fix
-latest final CM7 sources
-added browser
kernel-002
-gps fix
-lcd backlight resume fix
kernel-001
-tun/tap
-dmmod
-dmcrypt
-1.1 ghz frequency
-undervolt
-ondemand cpu scaller (default)
-camera debug messages
-netfilter
small progress on v14 alpha
-some small camera fixes
-custom kernel with 1.1Ghz Clock (default kernel)
-on demand spuscaller
-all addon modules included into kernel
-new wifi module compiled from source
-fixed BUG usb safe to remove
-fixes lots os crashes in su apps
-SDCard performance tweak
-silent bootloader (no more mesages)
-reduced kernel boot time
-added wifi
-removed browser
-added firefox
-default kernel se kenrel
cm7RC4-013
-fixed gralloc
-reverted to standard audio policy
-added missing copybit (camera fix)
-updated to lastes rc4 wich has lots of fixes
-added Spareparts
-wifi mac
CM7-012a
fixed all reported bugs
CM7-012
-possible wlod fix
-performace tweak
-various fixes
-new wifi module (enable wifi at first boot)
CM7-011
-system crash no longer needed on first boot
-reverted sensors to precompiled so that we have proximity working
-reverted precompiled su
-modified audiopolicy and now we should not have lower ringer volume
-added custom kernel and set it at optional
CM7-010a
-corrected missing keylayout
-removed noads patch (lets see if it fixes wlods)
-added auto permision checking at boot
-moved gapps to separate file (lets see if it fixes wlods)
CM7-010
-wifi-added atheros sources
-corected inital ringtone
-patched lights module notification lights for RGB
-initial sensor source(we are no longer using se precompiled sensors)/ light and proximity dont work for now
-corrected axes for akmd in sensor
-added our beloved lv5219lg lightsensor in liblights and removed it from libsensors (nice setup !)
-busybox compiled from source
-camera is kind of working (image not usable yet) thanks bojojo2020
-patched buton lights (we dont have an lightsensor in sensors)
CM7-009
-audio and video streaming
CM7-008a
-bt from source
-wifi from source
-usb mount
CM7-008
-moved to CM7 RC2
-libcamera built from source (thanks acerliqiuid team)
-reverted prelink close to standard
-new omx from passion GRI40
-new stagefrighthw from GRI40
-some progress on camera (no error / no image)
-readded CMStats (fix FC in settings )
-added missing wallpaper in launcher (fix FC on select)
-added bladewififix
-updated Gapps to 20110307
-wifi fixes (reduced wifi errors)
-ramdisk cleanup
-download cache moved to /cache/download
-recovery moved to /system/recovery this way you can install any busybox version (thanks Androxyde)
CM7-007
-speedup renedering
-patched prelink again
-odexed everithing to speedup
-little more work on camera
-removed pv support (opencore is removed from GB)
-recompiled modules
-added tunnel module for openvpn
-fixed browser crash
-removed launcher wallpapers
CM7-006
-wifi will autoreconect
-fixed gralloc
-if backlights is not starting when you press power goto settings and enable auto backlight
-omx partialy fixed
CM7-005
-updated cm to 2.3.3
-fixed build tree (no more reboots)
-SETorch (Fork from Torch)
-SECmparts (Fork form CMParts)
-rebuilt xRecovery (smaller/cleanner)
-rebuilt kernel modules
-rebuilt wifi module
CM7-004
-updated gmail to 2.3.4.1
-fixed reboots
-rild now is again compiled from source
-patched prelink again
CM7-003
-cleanup time(removed all hardlinks)
-fully integrated in cyanogen build tree
-testing video codecks one by one to debug them
-removed all included apps (you find them in app folder)
-added new musc3
-removed tethering from settings
-disabled all animation (default)
-corected prelink map
-initial changes for hardware encoder (for camera)
-added omx tests (for video debuging)
-completely removed PV
CM7-002
-fixed missing SetupWizard
-fixed CMParts
CM7-001
-first port including all 1-17 aosp fixes
-added offline charging
-corrected gralloc
-removed ADW Launcher
-disabled all animations (enable them from settings)
And for j002......
CM7.1.0 RC0 J002
-standard DPI 240 ( breaks some apps)
-fixed WLOD
-increased speed
CM7.1.0 RC0 J001
-applied all X10 fixes
-kernel k011
-lowered DPI to 210
kernel-010
-kernel 2.6.29.6
-a lil more free ram
-removed UV for 998Mhz (seems to be the cause reboots)
-Fix FrameCap (Thank Z)
-addded all mtd partitions (Thank Z)
-in call volume boost
-compiled with new gcc 4.4.3
-changed SLAB alocator to SLOB
-enabled swap support
-added Tiny RCU
-FPS cap removed (still limited by GB)
-fixed iptables
-fixed kgsl for 1% performance gain
-fixed iptables for droidwall
-increased GPY mem from 2 to 5 mb
-Replace the implementation of the fsync(), fdatasync() and sync_file_range() with no-op.
-writeback: change default dirty memory settings
-use CFS scheduler
-added cpu compiler optimisation
-moved android console at lower address
-reclaimed 1mb unused shared ram
-increased charging curent to 400mA
-fixed missing modules
-reboot on battery less then 10%
-various fixes
-memory relocation according to standard 8k memory map
-removed smi
-removed kgsl
-removed partialy fps cap (gb seems not to be affected)
-Wlan fixed (use included wifi.ko)
-gps fix
-undervolt
-cpu cahe fix
Bet you wished you hadn't asked now.
If I'm not mistaken, CM7.0.3 is 2.3.3 and CM7.1.0 is 2.3.4....
tot31 said:
If I'm not mistaken, CM7.0.3 is 2.3.3 and CM7.1.0 is 2.3.4....
Click to expand...
Click to collapse
It is my friend.
Sent from my X10 using XDA Premium App
There is
smartgardens said:
Here's the changelog, it's provided in every new build.
cm7-022 final
-fixed deepsleep (use new provided baseband)
cm7-021 final
-updated kernel k11
-fixed small bugs
-latest cm7 patches
.....
Bet you wished you hadn't asked now.
Click to expand...
Click to collapse
There is nothing about 7.1.0 this is changelog for 7.0.3
Thank you tot31 & smartgardens. I didn't know that.
edit: I didn't seen that you also posted that changelog smartgarden LOL . Even in changelog in 7.1.0 there is not much informations about changes made in cyanogenmod 7. I was looking for changes in look and feel of ROM. I flashed 7.1.0 but i had some dificulties so I downgraded till it's more stable.
I really respect you smartgardens. Your post are allways helpful and understable even for me. You are one of the gurus of CM7 & X10.
maarky said:
I really respect you smartgardens. Your post are allways helpful and understable even for me. You are one of the gurus of CM7 & X10.
Click to expand...
Click to collapse
Thanks for the kind words buddy.
This is the rom you want for stability, follow the correct install process and you will be ok (Cyanogen CM7.0.3 J022 K011/K012 Gingerbread 2.3.3 FINAL)
If you want 2.3.4 then flash j003, i am testing now and the only problems so far are you have to connect to wifi using static ip which is easy and my phone rebooted when my battery level got to 9%, if you can live with those 2 small issues then go for it, both builds are fast.
Thanks very much. I don't have any known issues with j022 and using k012/128.
I'll j003 but it will not become my daily ROM. I use lot of wifi APs (I don't have data plan) at school also in restaurants and other places. Wifi is my only conection to the internet so it would be dificult for me to every time I need conection fill the static IP. And of course every restaurant or fast food thet has free wifi has diferent range of IPs.
Android 2.3.4 (Gingerbread) Kernel Version 2.6.35.7
Build No: GRJ22
New Feature
1. Support voice and video chat using Google Talk
Improvements included with Android 2.3.3 update
1. Improved and extended support for NFC – this allows applications to interact with more types of tags and access them in new ways. The new APIs have included wider range of tag technologies and allow limited peer to peer communication.
Also it has a feature for developers to request Android Market to not to show their applications to users if the device does not support NFC. In Android 2.3 when an application is called by a user and if the device does not support NFC it returns a null object.
2. Support for Bluetooth non-secure socket connections – this allows applications to communicate even with devices that is not having UI for authentication.
3. New bitmap region decoder added for applications to clip part of an image and features.
4. Unified interface for media – to retrieve frame and metadata from input media file.
5. New fields for specifying AMR-WB and ACC formats.
6. New constants added for speech recognition API – this supports developers to show in their application a different view for voice search results.
Improvements included with Android 2.3.2 &2.3.1 update
1. Supports Google map 5.0
2. Bug fixes on SMS application
Features from Android 2.3
User Features:
1. New user interface has a simple and attractive theme in black background, which is designed to give a vivid look while being power efficient too. Menu and settings are changed for ease of navigation.
2. Redesigned soft keyboard is optimized for quicker and accurate text input and editing. And the word being edited and dictionary suggestion is vivid and easy to read.
3. Multi touch key cording to input number and symbols without changing input mode.
4. Selection of word and copy/paste made easy.
5. Improved power management through application control.
6. Provide user awareness on power consumption. Users can view how the battery is used and which consume more.
7. Internet calling – supports SIP calls to other users with SIP account
8. Support Near-field communication (NFC) – high frequency high speech data transfer within a short range (10 cm). This will be useful feature in m commerce.
9. A new download manager facility that supports easy storage and retrieval of downloads.
10. Support for multiple cameras
For Developers
1. Concurrent garbage collector to minimize application pauses and support increased responsiveness game like applications.
2. Touch and keyboard events handled better which minimizes the CPU utilization and Improve responsiveness, this feature is beneficial for 3D games and CPU intensive applications.
3. Use updated third party video drivers for faster 3D graphic performance
4. Native input and sensor events
5. New sensors including gyroscope is added for improved 3D motion processing
6. Provide Open API for audio controls and effects from native code.
7. Interface to manage graphic context.
8. Native access to activity lifecycle and window management.
9. Native access to assets and storage
10. Android NDk provide robust native development environment.
11. Near Field Communication
12. SIP based internet calling
13. New audio effects API to create rich audio environment by adding reverb, equalization, headphone virtualization, and bass boost
14. Built in support for video formats VP8, WebM, and audio formats AAC, AMR-WB
15. Support multiple camera
16. Support for extra large screen
If you have found any bugs or issues with the latest beta please report them here instead of the DEV thread please leave that clear for the DEV's to work.
Working:
boot
GSM (phone/messages/GPRS/EDGE/3G)
Wifi
Bluetooth
HW acceleration (full)
Sound
Headphones
GPS
All sensors (proximity, roration etc)
CyanogenMod settings (not all, it's not fully merged by CyanogenMod team, not my fault)
Market (now you can download all apps available for Gio with GB)
Fixed animations (now it looks so good)
Facebook sync
Buttons backlight
GMail fully works
Browser fully works
ICS keyboard
Games - works as smoothly as on Gingerbread
YouTube
Deep sleep
Wifi signal indicator
Native Android mass storage
Without flickering
Almost working HW video acceleration
Smooth YT (LQ right now)
If you're using MIUI4 or any other modification of my ROM, please, don't report any issues. I won't help you!
CHANGELOG:
-----beta6
Android updated to 4.0.4
Clean CyanogenMod - we're using only CM9 sources with our device sources!
Super smooth system
Smooth windows animations
New phone lock animation
Hardware acceleration on most video formats (not all)
Smooth videos on YouTube (LQ only right now)
Fully working deep sleep (all the time when BT is disabled)
GSM fully works (signal indicator/mobile data/phone calls/messages etc.)
Updated GoogleApps
Temporary removed CRT screen-off animation (will be back in beta7)
-----beta5
Flickering is gone
Working native mass storage (no need for annoying UMS app again)
Updated CM sources
New kernel, updated to 2.6.35.7perf-CL945787
Smoother than Gingerbread
Really good system performance
Improved GPU performance
Removed UMS app
-----beta4 - Macław and Mikegapinski build
Deep sleep working - happy battery ;-)
Wifi indicator fixed
Fixed BT issues
Bluetooth headsets support
BLN support for all devices
Updated kernel [Macław]
Reduced flicker, but still exists
Soooo smooth
Added working GalaxyICS app - you can update your CM9 directly from your device
Of course updated CM9 sources
-----Nigthly 02-03-2012 - Macław and Mikegapinski build
From user view:
Base video acceleration - BUT STILL NOT FULL
Really improved performance
Small battery life improve
Added a lot of Qualcomm hardware libraries, which making CM9 stable and smooth
Still flickering, but you won't see it in everyday use
Updates in my famous libaudio
From developer view:
Rebuilded device sources
Cleaned config sources (no more use external hardware sources, small fixes on framework, nothing else!)
Included base video acceleration - but videos is still laggy
New, rewrited libgralloc
Removed unsused libcopybit
Finally with enabled QCOM_HARDWARE flag
Compiled with all of QCom stuff
Clean base Android sources - only needed changes in GalaxyICS config
-----Beta 3
Working GalaxyICS app - news about project and updates directly from your phone!
Added CM9 bootanimation
Fixed all apps, which using webcore (Facebook, Gallery etc.)
Fixed wrong text at wrong place
Fixed some issues in Phone.apk
Fixed user-agent in default Android browser
Latest CM9 sources - CM Settings, like percent battery indicator, finally working
Readded CM9 Music Player
Performance boost
-----Beta 2
Improved battery live
Working browser with full GPU acceleration and saving pages functionality
Working Gallery
Working GMail
Fixed CPU sleep when screen is off
Less flickering
-----Beta 1
Full HW Acceleration - smooth Trebuchet
YouTube fixed (temporary laggy)
Backlight works
New libaudio, rewritted from begining [Macław]
Some changes in framework
Updated sources
All headsets works
Temporary GMail and stock browser doesn't work propertly (graphic glitches, will be fixed)
-----Alpha 3
Fixed ICS keyboard
GMail fully works
Browser fully works
Performance boosts
Flickering is almost gone!
Merged with ICS-ACE project
New kernel [marcin1147]
Updated CM9 sources
Removed unused apps
----- Alpha 2
Fixed animations! Now it's working better than GM9
Market fixed, now you can download all apps available for Gio with GB
Calendar fixed
SetupWizard is working
BLN support
performance improved
Superuser binaries and app updated
Included Google Apps
----- Alpha 1
first CM9 for Gio release, based on original CM9 sources
GO HERE
thanks couldnt post the link due to being a new member
I'm waiting for the youtube works in all formats! hopefully be resolved soon, but that's what I use at night ^. ^ after what the camera does not use much but if they come together! Welcome them! Maclaw great!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you're a developer and wish to port this ROM to another device or just want to use it as a base, I ask that you PM me first!
Although this is based on the AOKP source, I've spend countless hours applying fixes, tweaks and a handful of modifications that were not included in AOKP's source. If and when you are
granted permission to use this ROM either as a base or to port it to another device, I except general developer courtesy and my name along with everyone found under credits/thanks in your credits/thanks section.
9/10 times you will be granted permission to use the ROM for whatever you wish, I just ask that a PM be sent to me prior to posting the ROM and that you follow through on the conditions of using the ROM
Like all my threads, I want to give credit and thank you for those that help me along the way and make these ROMs/MODs and everything I do possible!
Tomzefi (For donating his EVO 3D to me and being a cool dude)
Google and HTC | AOKP Team | Cyanogen | Preludedrew | Agrabren | MikeC84 | Tommytomatoe
iBlowpot | DigitalKarma | qnhoang81 | couga6442 | rohan32 | dastin1015 | NYCHitman1 | Hippie459MN | ramjet73
- All of Team D.I.R.T and everyone that supports us!
* If you feel that your name should be in the OP for one reason or another, please PM and I'll get you up there if I forgot you
Kernel Source to agrabren's kernel (v1.0 - v1.5): https://github.com/agrabren/android_kernel_htc_shooter
Kernel Source to MikeC84's kernel (v1.6 - v1.8): https://github.com/MikeC84/android_kernel_htc_shooter
Kernel Source to JMZtaylor's kernel (v1.9): https://github.com/jmztaylor/kernel_htc_shooter
Kernel Source to Evervolv kernel (v2.0 til v2.1): https://github.com/Evervolv/android_kernel_htc_shooter
Kernel Source to bigwillyg's kernel (v2.2): https://bitbucket.org/bigwillyg/buttered_toast_shooter/src
Kernel Source to DIRT-MOD kernel (v2.3 til whenever): https://github.com/TeamDirt/android_kernel_htc_shooter
- Wipe EVERYTHING
- Download the ROM using WiFi
- Move the ROM zip to the sdcard
- Flash it and ENJOY
Make sure you're NOT using the 1.58 HBOOT
(this will cause reboots and other issues)
(In order of importance)
- No 3D
Code:
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.0[/SIZE][/B][/COLOR]
- Got it to boot
- Fixed a few things i.e SU, Browser, Proximity Sensor, etc.
- Removed a few apps that I considered blotware
- Removed the majority of NFC stuff
- Removed Video files inside system/media
- Updated Hosts (Ad-Free experience)
- Edited framework to make Own number for voicemail
- Landscape Lockscreen MOD applied
- Basically that's it......this is the first release so there'll be more fixes to come
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.1[/SIZE][/B][/COLOR]
- Lockscreen battery percent in ROM Control
- More optimization and tweaks to increase speed (should notice compare to previous version)
- "About AOKP" option added in case you want to show your support
- Lockscreen weather is now available with beautiful lockscreen icons
- More options under sound for Face down audio mode
- A bit more organized in ROM Control...menus moved around a bit
- Added OI File Manager
- Fixed headphone jack bug
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.2[/SIZE][/B][/COLOR]
- Fixed USB Mount issue
- Fixed Roaming Indicator (it now shows your connection/network i.e sprint or roaming)
- More options/fixes under ROM Control to include the following.....
* Navigation Bar now works and can toggle On-Screen buttons on/off on the go
* Button glow animation for Navigation Bar
* Navigation Bar color change/glow color change
* Change lockscreen wallpaper
* Statusbar Toggle indiciator color change for enabled and disabled
* Statusbar Toggle indiciator alpha
* Brightness location for Statusbar Toggles
* Option to reset Statusbar Toggles
* Performance tab in ROM Control (SetCPU style options)
* Phone Call Silence options in Sound Settings
* Less Frequent Notification Sounds Options in Sound Settings
* Disable boot animation in General User Interface
* Option to change notification background in General User Interface
- New icons for ROM Control and a little bit smoother
- Updated Nova Launcher to latest v1.3 Beta 5
- Removed Landscape Lockscreen MOD (will provide flashable zip for those that want it)
- Removed DSP Manager (Kept on FCing in certain situation...will include when I can fix it)
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.3[/SIZE][/B][/COLOR]
- Fixed reported left side headphone bug
- Fixed FCing of DSP Manager so it back :)
- Optimized the ROM some what and reduced the total size to 99MBs
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.4[/SIZE][/B][/COLOR]
- Edited CdmaSMSDispatcher to possibly fix MMS issue (untested so you guys tell me)
- Remove LED Options in ROM Control (they don't apply to our phone)
- Removed Flash/LED option in toggles until fixed (caused reboots and other issues)
- Removed ProTekk O'Clock from Clock options (don't think anyone will miss that)
- Removed DSPManager from app drawer and moved it to Settings under Themes
- Added Data toggle
- Added Update App
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.5[/SIZE][/B][/COLOR]
- Ability to change carrier label
- Ability to change lockscreen text
- Ability to change clock color
- Should notice an improvement in Multi-Touch and just overall speed
- Decreased ROM size and now is down to 89.3 MB
- New Swag Papers
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.6[/SIZE][/B][/COLOR]
- The latest AOKP fixes/additions to include the following.....
[I]* Lockscreen targets with AOKP icons
* ADB over network
* IME switcher/toggler
* Ability to add weather panel above toggles or above carrier name
* Lockscreen Calendar Options
* Safe headset volume toggle (to prevent from blowing your speaker up)[/I]
- Baked in latest MAC Kernel
- Fixed DSPManager....hopefully this is the last time I have to deal with that
- Some more stuff I'm sure, can't remember right this minute......
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.7[/SIZE][/B][/COLOR]
- Fixed reported ringtone/notifications select in settings/sound
- Fixed reported hardware keys not vibrating on touch
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.8[/SIZE][/B][/COLOR]
- More Options in ROM Control to include the following
* Kill All button in recents
* Hold back to kill feature
* Power Menu options (add screenshot, navigation bar or airplane)
* Signal customize options
- Removed Lockscreen targets for now (caused issues)
- Added new CM10 Quick Message MMS app (have to enable it in MMS settings)
- Updated Apps that needed updating (Launchers, Update app, etc)
- New Team D.I.R.T boot animation (HUGE THANKS TO iBlowpot)
- Moved quick links to the bottom of settings (Think it looks better there)
- Fixed low sound/vibrate on touch issue (should notice the difference)
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v1.9[/SIZE][/B][/COLOR]
- MORE OPTIONS UNDER ROM CONTROL
* Hardware keys, change options of hardware buttons and action overflow option
* Lockscreen Targets (they're back)
* LCD Density Control (120 dpi to 240 dpi)
* Tablet UI (when enabled it will enable to 320 dpi, just use the LCD Density Control to set about 160 dpi)
- Renamed AOKP about to Show Your Support
- Added Team D.I.R.T to "Show Your Support" section (just twitter accounts no donation links)
- Added Team D.I.R.T IRC channel (we're usually on at night time...hahahaha)
- Fixed DSPManager
- Added Animation Manager (change Window and Keyboard transition/animation)
- Updated apps like supersu and updater app
- Added Launcher option in Settings (works only with Trebuchet for now)
- Added a few options to some menus
- Removed NOVA Launcher and STOCK AOKP launcher
- Included some performance and battery saving tweaks (build.prop and init.d)
- Included new kernel by JMZtaylor
***** Please note that some apps MAY NOT work 100 percent with tablet UI *****
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.0[/SIZE][/B][/COLOR]
- Fixed Google NOW
- Fixed MMS (confirmed working on Sprint by Dego41 and shinigami13.....also works on Boost Mobile, please see post #2)
- Fixed WiFi Tethering
- Added latest Nova Launcher and Apex Launcher in the /data/app folder so you can uninstall if you wish
- Started working on WiMax again (WIP)
- More ROM Control features to include the following
* Allow 180 degree rotation
* Vibrations (YEAH I KNOW.....but is kind of cool)
* Allow Lockscreen rotation (no more flashable mods)
* Add alternative Lockscreen music layout
* WiFi tether toggle
* More signal options i.e alt signal layout
* New deskclock that includes stopwatch & countdown
* More things that Team KANG added in their latest build
- Removed Screen Candy in settings/display
- Removed hardware tab in ROM Control
- Fixed Data usage (able to actually set mobile data limits if you want that)
- Made some more changes to menus in settings and other apps
- Changed kernel to latest Evervolv Kernel (I KNOW, it seems like every other update BUT I'm testing new ones to see which one is best)
- Most likely I forgot something but if I remember, I'll update this list.......ENJOY!!!
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.1[/SIZE][/B][/COLOR]
- Fixed network error and that other bs with Google NOW (should work with no issues)
- Tweaked settings and some other menus (Nothing major)
- Added Aroma Installer (BIG THANKS to [URL="http://forum.xda-developers.com/member.php?u=2268691"]thedawn2009[/URL]) to give you more options to include
* Launcher options (Apex, Nova or Trebuchet)
* Option to add commonly used apps such as Titanium backup, Chrome, YouTube and ROM Toolbox (all free versions)
* Latest GAPPS option
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.2[/SIZE][/B][/COLOR]
- Got rid of the whole porting thing and decide to built the ROM from source :laugh:
- Synced with latest AOKP Sources as of 04:39AM CST 19-OCT-2012
- Fixed a lot of the issues i.e themes not working, certain apps not installing, etc
- Incorporated JB Camera fix (HUGE THANKS to Agrabren and all involved)
- More options added to Aroma Installer (THANKS to theDawn2009)
- New Custom AOKP boot animation (THANKS to iBlowpot)
- Cherry picked the following piece of code
* CM Advanced Phone Settings
* On click action to notification clock and date
- More stuff (can't think of all that was done in the last few days)
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.3[/SIZE][/B][/COLOR]
- Sycned with latest AOKP sources
- Included latest kernel by thedawn2009
- Fixed FFC upside down bug
- Fixed Browser/webkit bug
- Fixed some glitches with graphics
- Added in Update App (Thanks Goo.im)
- Added Android 4.2 Keyboard/Desk Clock & Camera
- Added CM10 new File Manager
- Some other stuff I'm sure......
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.4[/SIZE][/B][/COLOR]
- Added options to control scroll friction and velocity in ROM Control
- Added increasing ringtone volume option in Settings
- Added CM Advanced Phone Settings
- Added CM CircleBatteries added to battery options
- Fixed a typo in settings (amazingly enough, nobody caught it)
- AOKP didn't merge anything today so nothing from them.....YET
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.5[/SIZE][/B][/COLOR]
- Added Honeycomb style battery in RC
- Added Gummy style battery in RC
- Added option to show WiFi network name in RC
- Added Statusbar Transparency in RC
- Added Hardware keys in Settings
- Added Button Light notification and Button actions in Settings
- Removed AOKP Statistics (honestly, it was annoying)
- Removed (for now) options to control scroll friction and velocity in ROM Control
- Added more options to Advanced Settings in Phone
- Fixed LCD Density issue
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.6[/SIZE][/B][/COLOR]
- Fixed webkit bug.....AGAIN (guess it broke when I synced with AOKP)
- Allow copy/paste in Google Talk
- Apply build.prop edit to fully remove bootanimation in RC
- Optimized launcher2 for more speed
- PNGOUT launcher2 images
- Camcorder fixed (Thanks Jsparta26)
- Edited LCD Density values in RC for our device
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.7[/SIZE][/B][/COLOR]
- Synced with latest AOKP sources to include things such as
* Circle lockscreen
* Cog Circle Battery
* Fix volume track skip control with 3rd party applications
* NavRing: Long press actions
* ROMControl Widget Fixes
* Much More
- Added Vertical CRT-off Animation (Thanks Evilisto)
- Added Mms auto-retrieval
- More advanced settings in Phone
- Added Center Lockscreen MOD in ROMControl
- Fixed YouTube (please see note)
- I'm pretty sure there's more BUT I can't remember....OH WELL :)
**NOTE**
As a result of Jsparta26's Camcorder fix that fixed the camcorder, things such as youtube and I believe Netflix were broken.
I conducted a quick poll to see which one we should have....camcorder or youtube and youtube won due to the fact that
there is a work around for the camcorder by using [URL="https://play.google.com/store/apps/details?id=com.androidillusion.videocamillusion&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5hbmRyb2lkaWxsdXNpb24udmlkZW9jYW1pbGx1c2lvbiJd"]Videocam Illusion[/url]
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.8[/SIZE][/B][/COLOR]
- Fixed Camcorder issue (Thanks dastin1015 for the tip)
- Synced with latest AOKP sources (few minor things were merged, nothing noticeable)
- Removed Goo Manager (will look for an alternative updater app)
- Removed Vertical CRT-off Animation (Will bring it back when I'm able to make a toggle for it)
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v2.9[/SIZE][/B][/COLOR]
- Synced latest AOKP sources
- Fixed Video playback (Camcorder still works BUT freezes if you try to focus after recording)
- Fix/Update Cog Circle battery
- Removed Center Clock MOD (will bring it back when I get it working 100 percent with transparent lockscreen)
- Added in transparent lockscreen mod and made a toggle for it in ROM Control (still a WIP)
- Added CM's quiet hours in Settings
**When enabling the transparent lockscreen toggle, it will reboot the first time so please don't report that it reboots**
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v3.0[/SIZE][/B][/COLOR]
- Started compiling the ROM with latest Linaro Toolchain release 4.7
- Fixed brightness slider for tablet ui
- Update NovaLauncher and SuperSU
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v3.1[/SIZE][/B][/COLOR]
- All apps that needed updating, got updated (Nova Launcher, Terminal, etc..)
- Built and added in Evervolv Widgets (BIG THANKS to Preludedrew for letting me use them)
- Fixed and added in the center lockscreen mod (works flawlessly now with transparent lockscreen)
- Optimized the ROM with Linaro (please read what Linaro does and all that stuff in the second post of this thread aka FAQs)
- Added in DSPManager and new Apollo music player
- Added in Primo Launcher (Thanks for the tip ognimnella)
- Synced with latest AOKP sources
- Removed Hardware keys and added in Soft Key Options in RC
- Added in WiFi Tether Toggle
- Removed Quiet Hours (found out that it was already in Settings/sound....no need to have it in two places)
- I'm sure I'm forgetting something else....if I figure it out later, I'll add it back in :)
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v3.2[/SIZE][/B][/COLOR]
- Lots of kernel modifications (Thanks to MikeC84)
- Remapped DSPManager to Settings/Sound
- Added native syncing of Facebook (No need for HaxSync or any 3rd party apps)
- Upped the ROM optimization level to -Ofast
- Added Fast Charge toggle (still a WIP....may not even work)
- Added MikeC84 to "Show Your Support" tab in RC
- Changed weather icons (Looks better now IMO)
- Fixed CMFileManager RW issue
- Updated Hosts file for an ad-free experience
- Updated Primo Launcher to the latest version
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v3.3[/SIZE][/B][/COLOR]
- Unfortunately due to things out of my control, Primo Launcher had to be removed
- Removed DSPManager
- Removed Fast Charge toggle until I can fix it
- Added in AWESOME Beats, IMO is better (YMMV and be careful not to blow out your speaker)
- That's about it......ENJOY!!
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v3.4[/SIZE][/B][/COLOR]
- Added bootloader option in power menu
- Added six batteries to be toggled on/off in RC under Battery
- Added stationary lock button to the right of settings in pulldown to reduce wear on the actual hardware button
- Added missing info in settings/About AOKP/Hardware info
- Added new Team D.I.R.T member in RC (MazWoz)
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v3.5[/SIZE][/B][/COLOR]
- Added some 7 more batteries into ROM Control
- Fixed Wimax/4G (see note #1 below)
- Added an "Automatically Connect" option for WiFi networks
- Added more launchers (Apex and Trebuchet aka CM Launcher)
- Added Launch tools in developer options
- Added new Team D.I.R.T member in RC (Lloir)
- Added some build.prop tweaks to improve network speeds ([COLOR="Red"][I]Thanks Jsparta26[/I][/COLOR])
- Made some edits to the ramdisk to improve performance (see note #2 below)
- Updated Dirt Papers with no wallpaper option & more wallpapers
[B][SIZE="3"]**NOTE #1[/SIZE][/B]
OK, well wimax works! "Jump for joy" BUT this doesn't mean is flawless! What
this means is that althought it works, 4G icon doesn't show up! I've tried to fix
this on my own and to be honest, I couldn't. I then push pride aside and talked
to a few knowledgeable developers out there and what we came up with is that
this is an issue that's going to be present for a while! Is not something that's
easily fixed! We will work on it as a group and hopefully put this issue behind us!
Like all things, it just takes times! :good: Just know that the speedtests done
yesterday by the testers do confirm that wimax does indeed work!
[url]https://dl.dropbox.com/u/43588545/Screenshot_2012-12-15-18-59-50.png[/url]
[B][SIZE="3"]**NOTE #2[/SIZE][/B]
You won't see the improvements in benchmarks. Actually you may see a decrease
in benchmarks because of the tweaks made but I honestly don't care about that!
As long as the actual performance is up to my standard, I could care less what
AnTuTu or any benchmark says AND I believe you should feel the same way too :good:
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v3.5.1[/SIZE][/B][/COLOR] ***Incremental Update***
- Fix Gummy style battery in RC/SystemUI to show during charging
[COLOR="Red"][B][SIZE="3"]Team D.I.R.T Unofficial AOKP v3.5.2[/SIZE][/B][/COLOR] ***Incremental Update***
- Possibly made flashing an Incremental update easier and noob proof ([B][COLOR="Red"]Thanks ramjet73[/COLOR][/B])
- Added "Rainbow" battery as requested by Shadow89
- Fixed settings in Trebuchet launcher
http://teamdirt.me/showthread.php?2-ROM-Team-D-I-R-T-LINARO-OPTIMIZED-JB-4-1-2
STEP BY STEP TUTORIAL ON HOW TO FLASH AN INCREMENTAL UPDATE
BIG THANKS TO incarceration for this!!
Signature Support Banners
To use it just go into your USER CP, Edit Signature and place this in the edit box
HTML:
[CENTER][IMG]http://i.imgur.com/1AMJq.jpg[/IMG][/CENTER]
To use it just go into your USER CP, Edit Signature and place this in the edit box
HTML:
[CENTER][IMG]http://i.imgur.com/bRqFf.jpg[/IMG][/CENTER]
IF YOU DON'T READ ANYTHING....PLEASE READ THIS!!
PLEASE be respectful and REMEMBER that this is FREE! I do NOT work for you! I have NOT and WILL NOT ask for donations for any of this! If you wish to donate, that's on you and that's just that....is a donation! YOU WILL NOT get an early copy of ANY ROM and I will not post your name/username anywhere....just not my style! Also please don't ask for ETA's or expect updates based on other things i.e someone fixed this or whatever the case may be!
ENJOY!!!
Team D.I.R.T wallpaper app (DIRT Papers)
Code:
v1.0
- Initial Release
V1.1
- Added more wallpapers
- Added a no wallpaper option
- Changed default icon
Don't like the stock green smiley images in Jellybean??
Well THANKS to Hippie459MN, you can change that :good:
http://d-h.st/QwE (Only works for the v3.5 update)
Stock messaging app in v3.5 with ICS smilies: http://d-h.st/LyW
HOW TO GET MMS GOING FOR BOOST MOBILE
1. Use the Voice Dailer and say "Open APNs"
2. Click on "Open APNs"
3. Click on the default Sprint Access Point tab
4. Put in the following settings....
Name = Sprint
APN = Boost_Mobile
Proxy =
Port =
Username =
Password =
Server =
MMSC = http://mm.myboostmobile.com
MMS proxy =
MMS port =
MCC = 310
MNC = 120
Authentication type = PAP or CHAP
APN type =
APN protocol = IPv4
APN roaming protocol = IPv4
APN enable/disable (greyed out) = Apn enabled
Bearer = Unspecified
5. Save the settings by hitting menu and save
6. Select your modified Access Point
7. REBOOT and ENJOY MMS through the native MMS app
HOW TO GET MMS GOING FOR Cricket (THANKS to sniper849)
Original post can be found here http://forum.xda-developers.com/showpost.php?p=35605892&postcount=2822
1. Use the Voice Dailer and say "Open APNs"
2. Click on "Open APNs"
3. Click on the default Sprint Access Point tab
4. Put in the following settings....
Name-Cricket
APN-wap.cricket.com
Proxy-wap.cricket.com
Port-8080
User Name-Your phone [email protected]
Password-cricket
Server-leave blank
MMSC-http://mms.mycricket.com/servlets/mms
MMS Port-8080
MCC-310
MNC-016
APN Type-*
APN Protocol-IPv4
APN Roaming Protocol-IPv4
Bearer-unspecified
5. Save the settings by hitting menu and save
6. Select your modified Access Point
7. After changing the APN replaced the stock Mms.apk with this one below and push to /system/app
8. Reboot and ENJOY!!
https://www.dropbox.com/s/ae8d1s5erxf5428/Mms.apk (Just the Mms.apk)
http://goo.im/devs/Mazda/Shooter/Misc/CricketMMS.zip (Flashable zip)
Planned MODS for AOKP
- Transparent Lockscreen
- Different Battery MODs
- Sense 4.0 Recents
- Much More
Motorola Launcher and Clock Widget from the Razr M
MD5: 606cafd912e3335032c39e268fc751c9
Full credit to olm3ca for the RAZR M System Dump :good:
Q - Do I have to wipe before flashing??
A - YES, even if you're coming from a previous version of this ROM.
Q - I flashed (Insert kernel name) and now I'm having an issue, what should I do?
A - You can do one of two things. First one is to wipe everything and flash the ROM again and stick with the stock kernel. Everything was tested on the stock kernel and aside from what's under known issues, everything works as it should. The other thing is to find the developer of the kernel and report the bug/issue to them. Not trying to sound nasty or be rude BUT I can't and won't provide support for every kernel.
Q - I flashed the ROM and now I have an issue, what should I do?
A - Don't freak out! Pull a logcat and paste it on to pastebin and provide me a link in the thread to it. Along with the logcat, please provide me with as much information as possible. Things that you would think could help me fix this issue.....i.e what kernel you're running, what happened, what did you prior to the bug/issue.
Q - How do I pull a logcat?
A - Check out this thread http://forum.xda-developers.com/showthread.php?t=1726238
Q - I see (Insert developer name) has fixed this or has added this feature, are you going to do the same?
A - NO! No disrespect to that developer but I have not and will not keep up with what other developers are doing.
Q - I hate Google Voice and want to use Sprint VVM, where can I find it?
A - http://epicaokp.blogspot.com/2012/05/aokpcm9-fixed-sprint-visual-voicemail.html
Q - Does this ROM support USB OTG?
A - YES but not with the stock kernel. You'll have to flash the ButteredToast kernel.
Check this post for a more detail explanation of how to get things going for USB OTG on this ROM.... http://forum.xda-developers.com/showpost.php?p=34198005&postcount=1902
Q - I heard this ROM has that really nice circle lockscreen thing BUT I just have the stock lockscreen.....did I do something wrong?
A- NO! Just go into Settings/Security/Screen lock and select Circles
Q - Is it OK to ask for ETA's?
A - Unlike other developers (no disrespect to them) I have no issues with people asking for ETA's but PLEASE keep in mind this. I'm horrible at keeping deadlines when I give out ETA's for fixes or features or updates. LIFE tends to hit when you least excepted and with that said, I hate to do it because it pisses people off to be told Monday and the update doesn't come til Thursday. So with that said, you can ask for ETA's but is very likely that I will ignore this
Q - Does the WiFi Tether from the playstore work with this ROM?
A - Yes it does! Using the configs below it works just fine. FYI, the native WiFi tethering works as well
Device-Profile: Generic ICS/JB (wlan0)
Setup-Method: Auto
Routing fix: Enabled
Q - I've tried everything and I still can't get this ROM to flash, what can I do?
A - Pay close attention to the video below...........
Q - WHAT IN THE WORLD is Linaro?
A - I could go on and on about what Linaro is and bore the masses with facts and this and that BUT I won't!
Basically, linaro is just improvements done to the kernel and the ROM. These improvements are done by optimizing the GNU compiler collection (GCC) toolchain, the kernel, ARM power management, graphics and multimedia interfaces.
Q - What is Linaro going to do to this ROM?
A - Well it will do a few things to the ROM but one thing it won't do is, it won't increase the performance by 200 percent like you first heard when Linaro came out! It will indeed make things snappier. You will notice apps opening up a bit faster and in some cases, it will make a few of them run smoother. You will also see an increase in benchmarks (useless but fun to show off...lol) compare to a ROM not optimized by linaro by overclocking your EVO 3D but I would recommend you not do this as this will also cause your battery to drain.
Q - I'm having issues with the camcorder, what can I do to get it work?
A - Well although is working for the majority of the users using this ROM including myself, there's a select few that have issues with the camcorder. One way to temp fix this issue until I can get to the root of the problem is to lower your video quality from the default 720p to 480p. Make sure you clear your cache for the gallery before doing this and is been known to start working afterwards
Q - How do I flash a splash screen?
A - Download the splash screen and place it onto the root of your sdcard (not inside any folder) and reboot into the bootloader. Once in the bootloader, it will prompt you to flash the splash screen.....folder the on screen instructions and that's it
Q - I'm getting a 941 error from the Google Playstore. What is this and how can I fix it?
A - Unfortunately this issue is common and it is something that Google is working on fixing. Please check this thread http://forum.xda-developers.com/showpost.php?p=25448410&postcount=1 for a temp solution
Q - I keep on losing internal space when I use Wimax, what can I do to fix this?
A - Thanks to ramjet73, here's a fix http://forum.xda-developers.com/showpost.php?p=35588309&postcount=2792
HUGE thanks to Agrabren and CyanogenMod
What is a kernel?
In computing, the kernel is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level. The kernel's responsibilities include managing the system's resources (the communication between hardware and software components).
Click to expand...
Click to collapse
Code:
#include
/*
* Your warranty is now likely void.
*
* I am not responsible for bricked devices, dead SD cards,
* spontaneous combustion, or any other host of cosmic penalties
* which may befall you, your family, or your phone.
*
*/
• Patched up to Linux 3.0.63
• Linaro -O3 optimized
• Linaro Topology drivers
• Ziggy's CK1 patchset
• Snapdragon and Linaro optimizations
• Optimized CRC32 algorithm
• Updated zcache and zram
• Google snappy zram compression /decompression - default
• Updated LZO zram compression / decompression
• USB Fast Charge v3.1
• Sweep2Wake with user sysfs - YOU pick start and end points!
• Set default speeds min @ 192 MHz [email protected] 1512 GHz
• CPU OC up to 1.944 GHz
• L2 Cache up to 1566 MHz
• CPU supported unaligned access
• Ziggy's Vdd table interface
• GPU OC 2D @ 266 MHz 3D @ 320MHz with MHzx8 bandwidth
• Glitch free GPU frequency changing
• SLQB Memory Allocator - default
• SLUB optimizations
• Kernel based mpdecision with advanced screen off profile
• Kernel based thermal managment with 3 phase throttling sysfs
• vfp neon optimization
• aosp WiFi - bcmdhd
• Dynamic sync control
• Disable GENTLE_FAIR_SLEEPERS
• Lower vfs cache pressure and made configurable
• Lower display panel voltages with fix from Anryl
• Lowmemkiller and fugeswap
• Lower camera flash to 5%
• USB OTG
• USB headset detection
• Enable dynamic LED brightness
• AC charging for unknown chargers
• Prevent aliased request from starving I/O
• Optimized ARM RWSEM algorithm
• Use glibc version of lib: script
• Use glibc version of lib: memcopy
• Use git implementation of SHA-1
• Optimized AES and SHA1 routines
• Generic xchg-based implementation for ARMv6+
• Increase min /max readahead buffers
Governors
• Smartass v2 w/sysfs
• LagFree w/sysfs
• BadAss with GPU control
I/O Schedulers
• Noop
• Deadline - Tweaked for better performance on android
• Simple (SIO) - Tweaked for better performance on android
• BFQ v6
• Zen
• ROW v4 backported to 3.0 - Confirmed working!!
• Boot to recovery
• Wipe cache
• Flash kernel
• Done
Code:
v3.6
• Patched Linux to 3.0.63
• BFQ v6
• [URL="http://teamdirt.me/showthread.php?5-Kernel-aosp-MAC-v3-5-2-4-3-0-62-Linaro-O3-USB-FC-S2W-SLQB-CK1"]Download[/URL]
• https://github.com/DIRT-ROM/android_kernel_htc_shooter/commits/jellybean
• Herver - For the inspiration to make something as good as Baked Snacks.
• Agrabren - For all the QUALITY bases, probably wouldnt have this here today without him!
• Coolexe - For the high quality rom I use for testing and for help along the way.
• Cjoliver - For providing us with all the extra tweaks and latest linux patches.
• Dodava - For kernel based thermal management
• Dropzeroc - For making astounding roms.
• Mazda - For making some really nice graphics for my thread :good:
• Team D.I.R.T. - For being awesome and inviting me into the crew. Also for the base to this.
• Chad G - For porting sweep2wake to atmel touchscreens, GPU OC and help with some -O3 errors.
• Chad0989 - For making an amazing mod, USB Fast Charge.
• showp1984 - For sweep2wake, badass governor, kernel based mpdecision and just being a badass when it comes to android kernels!
• faux123 - For all the stuff I used from his kernels.
• ryrzy - Also for some stuff I used from his kernel.
• yank555 - For keeping us updated with USB Fast Charge.
If you get blank screen on wake up set default min cpu to 380
Code:
[B]Coming soon[/B]
Linux 3.0.65
xz compression ([URL="https://bitbucket.org/MikeC84/android_kernel_htc_msm8960/commits/f598c0d6431df411ae153e411911298a0fc8ff79"]source[/URL])
Linaro funroll loop opti
[B]2/11/2013 - v3.6[/B]
• [URL="http://teamdirt.me/showthread.php?5-Kernel-aosp-MAC-v3-6-2-11-3-0-63-Linaro-O3-USB-FC-S2W-SLQB-CK1"]Download[/URL]
• Patched up to Linux 3.0.63
• BFQ v6
[B]2/4/2013 - v3.5[/B]
• [url]http://d-h.st/tLB[/url]
• Patched Linux to 3.0.62
• ROW v4 IO scheduler
• Backport ROW to 3.0 - (faux123)
• Update BFQ to v5r1
• Update Linaro toolchain
[B]1/5/2013 - v3.2[/B]
[URL="http://d-h.st/zep"]http://d-h.st/zep[/URL]
• Wheatley governor
• Zen I/O Scheduler
• Update BFQ to v5
• Patch linux to 3.0.57
• Update updater script
[B]11/17/2012 - v3.0[/B]
• [url]http://d-h.st/gc0[/url]
• Patched up to Linux 3.0.53
• Update zcache and zram - (faux123)
• Add Google snappy compression / decompression and set to default
• Patched up to 3.0.51 - (Coolexe, cjoliver)
• Topology drivers - [url]http://patches.linaro.org/project/linux-arm-kernel/[/url]
• Optimized CRC32 algorithm
• Advanced screen off profile for mpdecision - (cjoliver)
• CPU Alignment fix
• Badass Governor with GPU control - showp1984
• Update Linaro toolchain - [url]http://releases.linaro.org/[/url]
• Disable ROW IO Scheduler
• Adjust vfs cache pressure
• Enabled USB OTG - Yes, I forgot about this :eek:
• Other minor tweaks and fixes
• Expose kblock_scheduled_delayed_work()
• task_times() explosion avoidance for tasks with > 2^32 accrued ticks
• sched,rt: fix isolated CPUs leaving root_task_group indefinitely throttled
• sweep2wake -> naming fix
• Linaro -O3 Optimized
• Fix -O3 compile errors (me - Chad G - Agrabren - Showp1984)
• Implement ck1 patchset - (Ziggy)
• Add -Ofast Linaro flag to config
• Ziggy's sysfs vdd interface - You can now see voltages in Antutu CPU master
• Ziggy's LagFree
• Ziggy's Smartass v2
• Update LZO zram - Now as fast as Google's snappy zram but with better compression - (faux123)
• zram - default back to LZO
• Remove Google snappy zram in favor of LZO - Better compression
• Removed a bunch of governors for battery testing (SavagedZen, Lionheart, Intellidemand, Scary, Lulzactive, Wheatley, Pegasusq, Lazy)
• Add ROW I/O Scheduler - Unstable WIP - (faux123)
• Optimized AES and SHA1 routines - (David McCullough)
• MHzx8 bandwidth - (Coolexe)
• 3-phase throttling with sysfs added to thermal managment - (Coolexe)
• User configurable sweep2wake coordinates - (cjoliver)
• Fix thermal management (me - faux123)
• Tweak deadline io scheduler for better performance on Android - (faux123)
• Sched fixes - (faux123)
• Generic xchg-based implementation for ARMv6+ - (faux123)
• Dynamic sync control
• Fix bug due to buffer overrun
• Fix Max speed on boot up
• Lower display panel voltages - Help with battery life
• Everything else from 1.0.0
• Snapdragon and Linaro optimizations
• Google's snappy zram compression / decompression
• USB Fast Charge v3.1 - (yank555)
• Sweep2Wake 3 button (menu, back, search) - (Coolexe)
• Set default speeds min @ 192 MHz [email protected] 1516 MHz
• CPU OC up to 1.944 MHz
• L2 Cache up to 1566 MHz
• CPU based alignment handling
• Vdd table interface
• GPU OC 2D @ 266 MHz 3D @ 320MHz (Chad G)
• Glitch free GPU frequency changing
• SLQB Memory Allocator - default
• SLUB optimizations
• Kernel based mpdecision - (Coolexe)
• Kernel based thermal managment - (Dodava)
• vfp neon optimization
• Disable GENTLE_FAIR_SLEEPERS
• Lower vfs cache pressure and made configurable
• Tweaked audio buffers for Beats
• Lowmemkiller and fugeswap
• Lower camera flash to 5%
• USB OTG
• USB headset detection
• Enable dynamic LED brightness
• AC charging for unknown chargers
• Prevent aliased request from starving I/O
• Optimized ARM RWSEM algorithm
• Use glibc version of lib: script
• Use glibc version of lib: memcopy
• Use git implementation of SHA-1
• Increase min /max readahead buffers
• Add optimization levels to config
USB Fast Charge
/sys/kernel/fast_charge/force_fast_charge == 1 to enable this feature // 0 to disable this feature (default)
from your pc:
adb shell
echo 1 > /sys/kernel/fast_charge/force_fast_charge
exit
from a terminal app on your device:
echo 1 > /sys/kernel/fast_charge/force_fast_charge
or to create a script:
just add echo 1 > /sys/kernel/fast_charge/force_fast_charge to the script
Check out Chad's app that let's you control fast charge.
https://play.google.com/store/apps/details?id=com.incredicontrol
Sweep2Wake
http://www.youtube.com/watch?v=jri2BMQHHrs
echo 0 > /sys/android_touch/sweep2wake
This will disable the sweep2wake.
Other options are.
0 for disabled.
1 for enabled.
2 for enabled with backlight.
cm9 - Working great
Sense 3.6 - takes screen shot when swiping to sleep
Sense 4 - takes screen shot when swiping to sleep
Miui Sense - Doesn't work great
Configurations:
Start button -> /sys/android_touch/sweep2wake_startbutton -> HOME, MENU, BACK
End button -> /sys/android_touch/sweep2wake_endbutton -> SEARCH, BACK, MENU
If u want ur s2w start from MENU button then
echo MENU > /sys/android_touch/sweep2wake_startbutton
and s2w end at SEARCH button then
echo SEARCH > /sys/android_touch/sweep2wake_endbutton
CPU OC
Not all phones can handle 1.9! You may experience reboots if set too high, just lower until no more reboots, every phone is different...
Over clocking the CPU may drain the battery faster than if you were are at stock clock speed.
Underclock for better battery life...
Governor Info
Look here for governor tweaks
Ziggy's Lagfree
Lagfree is similar to ondemand. Main difference is it's optimization to become more battery friendly. Frequency is gracefully decreased and increased, unlike ondemand which jumps to 100% too often. Lagfree does not skip any frequency step while scaling up or down. Remember that if there's a requirement for sudden burst of power, lagfree can not satisfy that since it has to raise cpu through each higher frequency step from current. Some users report that video playback using lagfree stutters a little. Sysfs included.
SmartassV2
Version 2 of the original smartass governor from Erasmux. Another favorite for many. The governor aims for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery. Sysfs included.
BadAss
Badass removes all of this "fast peaking" to the max frequency. On a typical system the cpu won't go above 918Mhz and therefore stay cool and will use less power. To trigger a frequency increase, the system must run a bit @ 918Mhz with high load, then the frequency is bumped to 1188Mhz. If that is still not enough the governor gives you full throttle. (this transition should not take longer than 1-2 seconds, depending on the load your system is experiencing)
Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1188Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.
I/O Scheduler Info
Noop
Inserts all the incoming I/O requests to a First In First Out queue and implements request merging. Best used with storage devices that does not depend on mechanical movement to access data (yes, like our flash drives). Advantage here is that flash drives does not require reordering of multiple I/O requests unlike in normal hard drives.
Advantages:
Serves I/O requests with least number of cpu cycles. (Battery friendly?)
Best for flash drives since there is no seeking penalty.
Good throughput on db systems.
Disadvantages:
Reduction in number of cpu cycles used is proportional to drop in performance.
Deadline
Goal is to minimize I/O latency or starvation of a request. The same is achieved by round robin policy to be fair among multiple I/O requests. Five queues are aggressively used to reorder incoming requests.
Advantages:
Nearly a real time scheduler.
Excels in reducing latency of any given single I/O.
Best scheduler for database access and queries.
Bandwidth requirement of a process - what percentage of CPU it needs, is easily calculated.
Like noop, a good scheduler for solid state/flash drives.
Disadvantages:
When system is overloaded, set of processes that may miss deadline is largely unpredictable.
CFQ
Completely Fair Queuing scheduler maintains a scalable per-process I/O queue and attempts to distribute the available I/O bandwidth equally among all I/O requests. Each per-process queue contains synchronous requests from processes. Time slice allocated for each queue depends on the priority of the 'parent' process. V2 of CFQ has some fixes which solves process' i/o starvation and some small backward seeks in the hope of improving responsiveness.
Advantages:
Considered to deliver a balanced i/o performance.
Easiest to tune.
Excels on multiprocessor systems.
Best database system performance after deadline.
Disadvantages:
Some users report media scanning takes longest to complete using CFQ. This could be because of the property that since the bandwidth is equally distributed to all i/o operations during boot-up, media scanning is not given any special priority.
Jitter (worst-case-delay) exhibited can sometimes be high, because of the number of tasks competing for the disk.
BFQ
Instead of time slices allocation by CFQ, BFQ assigns budgets. Disk is granted to an active process until it's budget (number of sectors) expires. BFQ assigns high budgets to non-read tasks. Budget assigned to a process varies over time as a function of it's behavior.
Advantages:
Believed to be very good for usb data transfer rate.
Believed to be the best scheduler for HD video recording and video streaming. (because of less jitter as compared to CFQ and others)
Considered an accurate i/o scheduler.
Achieves about 30% more throughput than CFQ on most workloads.
Disadvantages:
Not the best scheduler for benchmarking.
Higher budget assigned to a process can affect interactivity and increased latency.
SIO
Simple I/O scheduler aims to keep minimum overhead to achieve low latency to serve I/O requests. No priority quesues concepts, but only basic merging. Sio is a mix between noop & deadline. No reordering or sorting of requests.
Advantages:
Simple, so reliable.
Minimized starvation of requests.
Disadvantages:
Slow random-read speeds on flash drives, compared to other schedulers.
Sequential-read speeds on flash drives also not so good.
3d CDMA forum is officially D . I . R .T . y. This guy is a monster
sent from another Galaxy
Thanks Mazda. Looks like ima have to downgrade to 1.40 to flash this then . Oh well its not that big of a deal.
glad to see you over here mazda..flashing now sir
Sent from my GT-P7510 using Tapatalk 2
Me gusta...
Sent from my PG86100 using Tapatalk 2
Johnny424 said:
glad to see you over here mazda..flashing now sir
Sent from my GT-P7510 using Tapatalk 2
Click to expand...
Click to collapse
Yes SIR!! I'm glad to be here! Hopefully I can contribute as much as I have in the EVO4G section
This is excellent news. I haven't tried AOKP myself yet, but considering Agraben is out now and there really isn't a solid and currently developed alternative to his build of AOSP on our phones, I'm totally keeping my eye on this thread! Totally jumping to this rom soon.
Mazda said:
Yes SIR!! I'm glad to be here! Hopefully I can contribute as much as I have in the EVO4G section
Click to expand...
Click to collapse
i have no doubt about that bro..:thumbup:
Sent from my GT-P7510 using Tapatalk 2
This is dope, glad to see new devs show our section some much needed love.
Sent from my PG86100 using xda app-developers app
Good job on this Rom
AMAZING!!!!!!!!!! Thank u kind sir.:beer:
Sent from my PG86100 using xda app-developers app
the wro the Rom, are the softwar are the software buttons standard or can they be removed.
Good to see you here in the Evo 3D section, I used some of your ROMs on my Evo 4G
airs0ft3r said:
the wro the Rom, are the softwar are the software buttons standard or can they be removed.
Click to expand...
Click to collapse
The On-Screen buttons are set on by default. The reason I did this was because in ROM Control, the Navigation bar toggle didn't work. You would set it on, reboot and come back and NOTHING
I will put together a flashable zip for those that want it removed until AOKP fixes that in upcoming releases :good:
DarkRazorZ said:
Good to see you here in the Evo 3D section, I used some of your ROMs on my Evo 4G
Click to expand...
Click to collapse
Thanks man!
How smooth is it? I'm coming from Paranoid Android and love it, but got spoiled with almost everything working. I'd love to try this, so I'm curious as to how well it runs. I could do with out camera for awhile!
Great work! Sounds very promising!
vestaviajag said:
How smooth is it? I'm coming from Paranoid Android and love it, but got spoiled with almost everything working. I'd love to try this, so I'm curious as to how well it runs. I could do with out camera for awhile!
Great work! Sounds very promising!
Click to expand...
Click to collapse
That's a hard question to answer! That's mainly based on opinion. I can tell you is super smooth while someone tells you it lags like crazy.
Just make a Nandroid of your setup and flash this, if you like it then stay....if you don't, go back to your daily
Let me know, how you like if you decide to try it out
Hello!
This is development thread of PAC-man (all-in-one) 4.3 by MaclawStudio.
Credits:
Macław
marcin1147
You can get it from http://maclaw.pl/.
Download is directly provided from our servers - it's fast, stable and fully resumable!
If you appreciate our work, please, use thanks button!
XDA:DevDB Information
PAC-man 4.3.1, a ROM for the Samsung Galaxy S III Mini
Contributors
New Macław, marcin1147
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
Based On: PAC-man
Version Information
Status: Stable
Current Stable Version: 20140227
Stable Release Date: 2014-02-27
Created 2013-12-03
Last Updated 2014-03-02
Features / Issues
Features
2D/3D HW Acceleration
GPS and A-GPS – fast fix getting
Glonass navigation
compass
audio (both speakers/headphones/microphone)
sensors
Wi-fi
bluetooth
all native tethers (Wifi/BT/USB)
native Wifi tether
camera (normal/panorama/camcorder)
Google Play
PAC functionallity
CPU sleep mode
App2sd support
SIM Toolkit
MTP
ADB
no flicker
full hardware video acceleration (720p)
YouTube HQ
Wifi direct
3.0.101 kernel
BLN (backlight notifications) support
offline charging
SELinux (temporary disabled)
64GB+ sdcard native support (exFAT)
auto EFS backup
New BT/GPS/Wifi/offline charging/audio/sensors drivers – no longer buggy Samsung’s ones!
built using Linaro toolchain
no 1GHz bug
also flashable via Odin
Issues
None!
Changelog
20140227
PAC sources update
audio: autodetect for 44.1/48KHz
RIL: remove some uneeded AOSP stuff
better power managment
better memory managment (we have enough RAM to use it)
better apps running in background management
even more AOSP-like OMX implementation
AOSP-like RIL
small stability improvements
reduced spam in logs
less /data partition usage by system
better FM signal (but still needs SpiritFM to work)
better BT signal range
Odin package also updated
20140220
PAC-man sources update
stable release
small UI improvements
tethering via 802.11n support
OS X USB tethering support
bugfixes in changes from last week
STE libs from source [part #3]
faster MTP file transfer
STE libs from source [part #4]
toolchain update
bugfixes for PowerAMP with activated Direct Volume Control
correct HW acceleration by GPU [testing]
experimental fix for 1GHz bug
big overall RIL improvements
Odin package also updated
20140214
PAC sources update
huge display improvements – much faster UI (wipe dalvik is recommended!)
device cleanup
faster offline charging
BT: faster file transmission
bugfixes in liblight (screen/buttons backlight)
reduced delays in Phone app
reduced delays in receiving messages in stock app
improvements in exFat support
Odin package also updated
20140209
PAC sources update
AOSP RIL support (5/5)
audio from sources [testing] (2/3)
huge cleanup
switching from STE blobs to sources [part #1]
battery improvements
switching from STE blobs to sources [part #2]
support for 48KHz audio (in/out)
[testing] huge microphone quality improvements
switching from STE blobs to sources [part #3]
resolved minor bugs in changes from last days
switching from STE blobs to sources [part #4]
RIL: signal stability & national roaming improvements
toolchain update
RIL: faster network searching
AOSP OMX/Camera: better buffers freeing
in-call audio quality resolved (issue were only for some networks)
battery stats are more accurate
faster boot
RIL: overall cleanup
BT: transfer rate improvements
Wifi: lower battery consumption due to autoscan disable when connected
GPS improvements
Odin package also updated
20140126
PAC sources update
natively RIL patches instead of using java class (better RIL stability and less battery usage – WIP)
AOSP-like OMX/Camera implementation
AOSP RIL support (1/5)
removed all unused java classes
AOSP RIL support (3/5)
fixed some bugs in multimedia fix
AOSP RIL support (4/5)
audio from sources [testing] (1/3)
Odin package also updated
20140120
PAC sources update
stable release
phone (Dialer app) is working very fast now
small tweaks for stability
added command line bluetooth tools for debbugging
huge UI smoothness improvements
video playing improvements
huge device cleanup
resolved all issues with 2g/3g toggling
preparing for OTA (WIP)
Odin package also updated
20140116
PAC sources update
stable release
removed unused part of camera implementation to make it faster
stability improvements
removed unused by us BT stuff (next part of FM implementation)
small audio improvements
minor bug fixes
Odin package also updated
20140111
PAC sources update
improved battery life
improved stability
less energy consumption by the screen
fully fixed camera preview in every app
fully fixed video playing in all apps
faster shutdown
Odin package also updated
20140105
PAC sources update
faster focus getting in camera
(testing) better battery life when playing multimedia files
rewritten RIL class
resolved some bugs in battery improvements from last days
bugfixed in new RIL
big optimization p. #4 (last)
less CPU usage on audio playing (testing)
changes for native FM radio support (WIP)
added missing codec in OMX implementation
new RIL is stable now
removed no needed codecs from OMX implementation
boot should be even faster
changes in BT for native FM radio support (WIP)
trying to fix YT video quality
Odin package also updated
20131227
PAC sources update
faster transmission via Bluetooth
(testing) faster BT tethering
removed unneeded changes for OMXes (should be faster now)
faster camera preview
SD card R/W speed improvement
faster boot
updates in buffers
more videoapps are working correctly now
lower battery comsumption by wireless devices (wifi/bt/gsm)
better DivX support
Odin package also updated
20131217
CM sources update
big optimization p. #1-3
(testing) Wifi range improvements
(testing) longer battery life with Wifi on
Odin package also updated
20131212
WE HAVE RESOLVED ALL DISPLAY ISSUES!
no flickering/tearing at all – just like on stock ROM
fluid UI
enabled tripple buffering
Odin package also updated
20131209
completely remade OMX implementation from a scratch – finally there shouldn’t be any issues related with them
huge performance boost
Odin package also updated
20131204
fixed volume levels
RIL improvements (signal range & stability)
better headset quality (testing)
Odin package also updated
20131203
first release
Downloads
All releases and Google Apps are available for download from:
http://maclaw.pl
Download is directly provided from our servers - it's fast, stable and fully resumable!
Sources: http://opensource.maclaw.pl/
Kernel sources: http://get.maclaw.pl/?id=754
woow ))
Sent from my GT-I8190 using Tapatalk
maclaw rules!
downloading.... and i will report
Simply awesome mac:laugh:
Everything works great for me except for theme chooser
it says
unfortunatly themes provider has stopped blame tyler
eswarvf said:
Everything works great for me except for theme chooser
it says
unfortunatly themes provider has stopped blame tyler
Click to expand...
Click to collapse
Are you using any theme from your old rom? Did you a full wipe? Or clear the data from "themes provider" app & try again.
How can I desactivate all the transition animations?
Feyerabend said:
How can I desactivate all the transition animations?
Click to expand...
Click to collapse
On developer options (windon animation scale, etc.) I think.
Downloading
Sent from my GT-I8190 using XDA Premium 4 mobile app
everything works phenomenally, thanx maclaw and rest dev
Sent from my GT-I8190 using Tapatalk
TabletUI
For me, in TabletUI, I have no navigation bar, in PhabletUI I have no QuickSettings panel... All other stuff works great, buttery smooth
EDIT: QuickSettings found, but it's not displayed correctly...
Is halo include? Thanks btw
Enviado desde mi GT-I8190 mediante Tapatalk
alonsoch said:
Is halo include? Thanks btw
Enviado desde mi GT-I8190 mediante Tapatalk
Click to expand...
Click to collapse
Yes it is
Sent from my GT-I8190 using XDA Premium 4 mobile app
Wow,i am so amazed. Thanks Mac!
Sent from my GT-I8190 using XDA Premium 4 mobile app
thejester123 said:
Yes it is
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks my friend...!! if im runing cm 10.2 y just need make wipe cache and dalvik cache? and how is working the rom?
alonsoch said:
thanks my friend...!! if im runing cm 10.2 y just need make wipe cache and dalvik cache? and how is working the rom?
Click to expand...
Click to collapse
As always, you don't need a full. But don't report bugs if you don't do it
DarkCyanogenMod is a Rom CyanogenMod Based and is free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
DarkCyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
[CENTER][SIZE="4"][B]Features:[/B][/SIZE]
CyanogenMod Based for Stability and Speed
Audio DSP from OmniRom
[B][WIP][/B]Multi-Window Ported from OmniRom
Full Kitkat Colors (Black and White)
Swap Memories
Enable - Disable Partial Features on Low Ram Devices
Trds 3.0 Ported from PAC-man/Slim Rom
Scrolling Cache Improve Option
No Intrusive InCallUI
Background InCallUI
Battery Saver Mode 3G/2G when Display is off and Data is On
Status Bar Network Speed
Lockscreen Blur Ported from PA
Flip to Mute/Reject Call
Direct Call
AppBar or Sidebar
WIP Active Display (If you have pocket mode enable you will be use more battery because the proximity sensor is working all the time)
New Switch ON/OFF Buttons
Dark Calendar App
Sjow AM/PM on clock Thanks to @Madridii
DarkCM platlogo and DCM wallpapers thanks to @Racun
[B]
[WIP] LockScreen Notifications By AOSPAL
Audio Theme Support
Blur Settings
Disable Widget Frames
QuickSettings (Flip Tiles and Tiles per Row)
Notifications Style
WakeLock Blocker
Long press back to kill configurable timeout
Volume Steps (Now you can calibrate the sound for every session like Alarm, Music , etc.)
First Translations Made By @qurshot (Turkish) and @käsebr0t (German) Languages Only for now
Advanced Settings into Settings By @CastagnaIT
[/B]
[B]More Others Features will be coming (Remember the ROM is still WIP State)[/B][/CENTER]
What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
USB/Wifi tethering
Contributors
davidteri91, DevConnection_Team, Madridii, CyanogenMod, Racun,nAa,LX
Based on LX cm11 so thx goes to them .
Download ROM
Download PA Gapps
OmniROM Sound Packs
Sypher's Sound for Audio Theme Support (Like OmniROM Sound Packs)
If you want help us to translate you can translate THIS at your language
Changelog
Code:
[COLOR="red"][B]DCM 4.1[/B][/COLOR]
Remove Blur (Cause Keyguard issues)
SlimPIE
Allow legacy widgets at Lockscreen
Archidroid Optimizations V3 (Compiled with Pure LINARO Toolchain)
Circle SideBar
App PEEK detection Support Like in PA Rom
Inline with CM sources
Probably last 4.4.2 Rom (I am merging the 4.4.3_r1.1 changes from AOSP)
[COLOR="red"][B]DCM 4.0[/B][/COLOR]
Fast Charge Tile
Music Tile
Floating windows (Halo, Long Press from Notification Bar, Long Press from SlimRecents, Long Press from Recent)
Google Recent UI
Reworked Settings Options Inline with CM
Warning Battery Low Option Like PA
Works for HOVER (Not implemented yet I can't release it we need wait PA team)
Blur Lockscreen (Without Radius at the moment)
APP System Remover
Peek Wake timeout Option (Only for Supported Devices)
Clock Font Style
Clock Color Style
Clock Options reworked
Smart Pull-Down - Any Notification
Navring last app toggle
Driving Mode
Breathing missedcall/sms/voicemail
ENJOY
ScreenShots
Moderator Edit: Don't Quote the whole OP
As this is the Ion kernel based build
I it Stable????
Coconut90 said:
As this is the Ion kernel based build
I it Stable????
Click to expand...
Click to collapse
I don't have the device but on my anzu it is very stable with ION kernel and as this device is pretty the same I gauss it will work great.
but for that I need you and others to test it.
As its based on ION kernel so it do have audio bug too ?? is it resolved in this rom or its still present ?
gmp009 said:
As its based on ION kernel so it do have audio bug too ?? is it resolved in this rom or its still present ?
Click to expand...
Click to collapse
this based on cm11 build that build from source and I don't really know what works or not , try it and if it's working for you report back here.
Waiting for coconut.........
Dual Speaker FIX (+ Working xLoud)
Since this ROM is built from CM sources, the audio issue will be there...
So...whenever the build is uploaded!
@afi1982 : Pin this post to the OP/FAQ for coconut users...
To ALL coconut users,
A Fix for the "only ONE speaker working" problem in the latest nightlies (ION based)...
Here's the link:
http://forum.xda-developers.com/showpost.php?p=52258649&postcount=3555
PS: Don't forget to hit thanks!
BRAiNCHiLD95 said:
Since this ROM is built from CM sources, the audio issue will be there...
So...whenever the build is uploaded!
@afi1982 : Pin this post to the OP/FAQ for coconut users...
To ALL coconut users,
A Fix for the "only ONE speaker working" problem in the latest nightlies (ION based)...
Here's the link:
http://forum.xda-developers.com/show...postcount=3555
PS: Don't forget to hit thanks!
Click to expand...
Click to collapse
correct the link
Oops!
gmp009 said:
correct the link
Click to expand...
Click to collapse
Oops! My bad!
Corrected it..Thanks! :good: :highfive:
Is this for coconut??
Because no coconut build..??
Sent from my Xperia Live with Walkman using XDA Premium 4 mobile app
I see that there is LTE option. Does this rom add it to our phones??
Just kidding, I know impossible. Will try when release for coconut, but from screens looks like cm with a little more func.
lsander said:
I see that there is LTE option. Does this rom add it to our phones??
Just kidding, I know impossible. Will try when release for coconut, but from screens looks like cm with a little more func.
Click to expand...
Click to collapse
It's a WIP so let me know what you want to see on this rom
Some news at next build
Still no coconut build
And what the means new build??? :what:
Old builds only not there
Sent from my WT19i using XDA Premium 4 mobile app
Coconut90 said:
Still no coconut build
And what the means new build??? :what:
Old builds only not there
Sent from my WT19i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
it will be out later this week and all MDPI devices will get it.
welcome peek
coconut
haida
hallon
iyokan
mango
satsuma
smultron
urushi
zeus
all are going to get DarkCm11 build Today.
I will start with coconut and then everyone will get just like the list order