First of all, THANK you for making progress on freeing our phones!
I have read every thread I can find on this, but I cannot find an answer to my specific problem.
I will try to make this brief.
Now onto my problem.
I am on Gingerbread 2.3.4
I tried yesterday to go to CM7
I followed the directions posted here.
I get to step 12 on the " HowTo: Perform a bootstrap (or nandroid) backup and recovery of your Motorola Droid X2" where I am tapping recovery mode and the phone reboots - but when plugged into a wall charger, I get stuck at the dreaded dual core screen.
Since this happened, I have went into my ASR and selected wipe cache, wipe partition and also did the factory data reset while the phone was booted up.
Even in this state, which should be reset to factory if I understand this correctly - when I plug into a wall outlet, it still will not boot past the dual core screen.
Any ideas?
One question I have is, how do I wipe davilik cache?
Please help!!
Reinstall dx2bsr.apk Run it. Install recovery. Set recovery mode. Flash cm7 Then wipe all 3. Then while still in cwr flash ReRecoverydx2.cm7..... see my sigy link.
skwoodwiva said:
Reinstall dx2bsr.apk Run it. Install recovery. Set recovery mode. Flash cm7 Then wipe all 3. Then while still in cwr flash ReRecoverydx2.cm7..... see my sigy link.
Click to expand...
Click to collapse
On it.
Thank you sincerely for your help! I know how noobish I am.
skwoodwiva said:
Reinstall dx2bsr.apk Run it. Install recovery. Set recovery mode. Flash cm7 Then wipe all 3. Then while still in cwr flash ReRecoverydx2.cm7..... see my sigy link.
Click to expand...
Click to collapse
Hmm.. Well, I may need more detailed instructions.
I reinstalled dx2bsr.apk.
Ran it
installed recovery
set recovery mode
Then I am stuck. I am not sure what this means "Flash cm7 Then wipe all 3. Then while still in cwr flash ReRecoverydx2.cm7"
I am able to boot into the os now, but it still sticks at the dual core screen.
I'm sorry I a$$umed you were on Blur. No?
If ON cm7 you must install the cm7 (see the OP) bsr.apk.
ejlarson249 said:
Hmm.. Well, I may need more detailed instructions.
I reinstalled dx2bsr.apk.
Ran it
installed recovery
set recovery mode
Then I am stuck. I am not sure what this means "Flash cm7 Then wipe all 3. Then while still in cwr flash ReRecoverydx2.cm7"
I am able to boot into the os now, but it still sticks at the dual core screen.
Click to expand...
Click to collapse
to wipe dalvik cache you go into advanced and then scroll down to dalvik cache and then if you want wipe battery stats. That should work out of it all. If anything, sbf back to 2.3.4, root, and then retry with the OG bootstrap and see where that takes you
No matter what I do, various combinations of putting the stock bootstrap back in, it will not reboot while plugged in. It freezes on the dual core screen.
I have done a full wipe, it still will not boot while on AC.
Ideas?
You are trying to boot What Rom???
If you have already flashed cm7 you MUST allow it to boot ( do a stock recovery wipe if needed-stuck @ m) then install cm7bsr.apk.
ejlarson249 said:
No matter what I do, various combinations of putting the stock bootstrap back in, it will not reboot while plugged in. It freezes on the dual core screen.
I have done a full wipe, it still will not boot while on AC.
Ideas?
Click to expand...
Click to collapse
are you running the bootstrap while plugged in? try untethering it, running BSR then plugging it in when your phone turns off.
What I want to accomplish is running CM7.
I am currently running 2.3.4.
This is so frustrating!
I am currently reading through the link in your sig, but that isn't clear enough either.
Sorry, I am not getting this, there is too much jargon I don't understand. LOL!
ejlarson249 said:
What I want to accomplish is running CM7.
I am currently running 2.3.4.
This is so frustrating!
I am currently reading through the link in your sig, but that isn't clear enough either.
Sorry, I am not getting this, there is too much jargon I don't understand. LOL!
Click to expand...
Click to collapse
sorry, bro, are you booting into the bootstrap (BSR) while you're plugged into the wall outlet? If you are try to run BSR while not plugged into <the wall> and then once the phone shuts off [black screen] plug it in and then see if it boots into BSR.
You can boot to blur 234.
reinstall our old bsr and get it working.
This should get you to cwr.
---------- Post added at 10:23 AM ---------- Previous post was at 10:19 AM ----------
Then flash cm7 and gapps then wipe all three than flash rerecovery.cm7
I would suggest SBFing back to stock 2.3.4 blur and then follow the steps in the OP for cm7. Seems your very setup is very screwed up at this point. Sometimes it is just easier and faster to do a quick SBF and start over. Just my two cents
Well through some combination of things, it looks like I am magically in CM7.
Thanks all!
motcher41 said:
I would suggest SBFing back to stock 2.3.4 blur and then follow the steps in the OP for cm7. Seems your very setup is very screwed up at this point. Sometimes it is just easier and faster to do a quick SBF and start over. Just my two cents
Click to expand...
Click to collapse
Btw OP, you should probably learn how to do this. (sbf'ing)
It has saved ass after ass.
thelowend said:
Btw OP, you should probably learn how to do this. (sbf'ing)
It has saved ass after ass.
Click to expand...
Click to collapse
yes, yes it has, haha
Sent from my MB870 using Tapatalk
Related
Hi, I am pretty new to this stuff, so bear with me here.
I recently rooted and installed eclipse v 0.5. Everything went well except I did not get my contacts and figured I did something wrong in the original ROM. I decided to go back to my original rom...but decided to wipe data because I thought that was the right thing to do. Now I have no idea how to restore the nandroid backup because I don't know how to get to clockwork recovery.
Help would be appreciated.
Thanks
morlakai said:
Hi, I am pretty new to this stuff, so bear with me here.
I recently rooted and installed eclipse v 0.5. Everything went well except I did not get my contacts and figured I did something wrong in the original ROM. I decided to go back to my original rom...but decided to wipe data because I thought that was the right thing to do. Now I have no idea how to restore the nandroid backup because I don't know how to get to clockwork recovery.
Help would be appreciated.
Thanks
Click to expand...
Click to collapse
Ever Think About Booting Into Recovery And Following The Same Steps Just Switch Backup To Restore. I'm Sorry But I Can't Believe You Asked This. I Mean How Did You Flash Eclipse You Must've Used The Bootstrap.
MikeJ92YJ said:
Ever Think About Booting Into Recovery And Following The Same Steps Just Switch Backup To Restore. I'm Sorry But I Can't Believe You Asked This. I Mean How Did You Flash Eclipse You Must've Used The Bootstrap.
Click to expand...
Click to collapse
agreed, u should still have bootstrap installed. are in in the os and dont know how to perform the nandroid restore or are you in the recovery and dont know where to go from there?
After you flash a rom the first time you use bootstrap you have to click install recovery
Sent from my DROID X2 using XDA App
MikeJ92YJ said:
Ever Think About Booting Into Recovery And Following The Same Steps Just Switch Backup To Restore. I'm Sorry But I Can't Believe You Asked This. I Mean How Did You Flash Eclipse You Must've Used The Bootstrap.
Click to expand...
Click to collapse
It has been my experience that after wiping data the bootstrap recovery is gone. Or I guess I shouldn't say gone but it will not boot into recovery after data wipe.
Sent from my DROID X2 using Tapatalk
Interesting Until The Atrix Port That Was The First Time I've Had To Flash The Recovery Again.
MikeJ92YJ said:
Interesting Until The Atrix Port That Was The First Time I've Had To Flash The Recovery Again.
Click to expand...
Click to collapse
weird, I had root and bootstrap still installed after wiping data/cache and dalvik cache.
That Might Have Been Read Wrong, By Flashing Recovery I Meant Pressing The Install Button. To Me That's Flashing The Recovery.
Have you tried just plugging in the phone to the wall charger. Yes wall. And wait to see if it goes to recovery mode.
If it doesn't work all I think you can do is sbf and start again.
Sent from my DROID X2 using XDA App
ok:
what do you do if said event happens where your recovery doesn't load through after the rom installs with the wipe/cache wipe
your phone boots, however your usb conditions are stuck on usb mode rather than charge mode.
the initial setup starts but is stuck in a loop of force closes that never end.
i have successfully used Roms in the past, no big deal. when **** hits the fan i use sbf; but i'm stuck in limbo where both recovery and sbf are seeming to be out of my options - unless i can change usb mode to charge mode by some strange form of buttons pressed.
electroniko said:
Have you tried just plugging in the phone to the wall charger. Yes wall. And wait to see if it goes to recovery mode.
If it doesn't work all I think you can do is sbf and start again.
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
tried the wall charger - what i had used initially to get into said recovery, i left it sit for more than 3 hours to see if maybe i was just being impatient, well its pretty much not doing anything for me
SubVirus said:
ok:
what do you do if said event happens where your recovery doesn't load through after the rom installs with the wipe/cache wipe
your phone boots, however your usb conditions are stuck on usb mode rather than charge mode.
the initial setup starts but is stuck in a loop of force closes that never end.
i have successfully used Roms in the past, no big deal. when **** hits the fan i use sbf; but i'm stuck in limbo where both recovery and sbf are seeming to be out of my options - unless i can change usb mode to charge mode by some strange form of buttons pressed.
tried the wall charger - what i had used initially to get into said recovery, i left it sit for more than 3 hours to see if maybe i was just being impatient, well its pretty much not doing anything for me
Click to expand...
Click to collapse
Unplug your phone. Hold volume up and power on until you see the m logo and rsd protocol starting.
Sent from my DROID X2 using Tapatalk
well that allows rsd to find it but - it won't just flash it and call it good. i'm getting all sorts of errors from rsd saying something about my ini
Code:
Failed flashing process. Unable to retrieve initialization value from INI file (0x7029)
i get this error before the above error (before i actually "start" it)
Code:
Chipset type 53 is not supported
restarted computer:
updated drivers:
no dice, same errors
EDIT: the problem was in the RSD version i was using, i got everything working now. thanks!
hello,
I've got a problem i'm to new to atrix rom'ing etc. not new to androids rooting, etc... by no means am i pro either.
Here's My problem. Everyone rom i try to install leaves me stuck at the motorola bootscreen with unlock in the top left corner.
The only thing that brings me back in Fruitcake 2.3.4
I am rooted
I have BL unlocked
I am move zip to sd card of the rom (here)
http://forum.xda-developers.com/showthread.php?t=1382934
and
http://forum.xda-developers.com/showthread.php?t=1374931
Boot into recovery
Wipe Data/Factory Reset
Install From zip
Choose Rom
Wipe Partition Cache
Wipe Dalvik cache
Stuck on Motorola Boot Logo w/ unlocked at tom left corner.
can anyone help me figure out what I am doing wrong?
Which recovery are you using? Try just wiping before and not after. I have not tried either of those ROMs but the CM7 Mod states to just do a wipe beforehand and not after. Maybe that might help.
sonikot said:
hello,
I've got a problem i'm to new to atrix rom'ing etc. not new to androids rooting, etc... by no means am i pro either.
Here's My problem. Everyone rom i try to install leaves me stuck at the motorola bootscreen with unlock in the top left corner.
The only thing that brings me back in Fruitcake 2.3.4
I am rooted
I have BL unlocked
I am move zip to sd card of the rom (here)
http://forum.xda-developers.com/showthread.php?t=1382934
and
http://forum.xda-developers.com/showthread.php?t=1374931
Boot into recovery
Wipe Data/Factory Reset
Install From zip
Choose Rom
Wipe Partition Cache
Wipe Dalvik cache
Stuck on Motorola Boot Logo w/ unlocked at tom left corner.
can anyone help me figure out what I am doing wrong?
Click to expand...
Click to collapse
sonikot said:
Stuck on Motorola Boot Logo w/ unlocked at tom left corner.
can anyone help me figure out what I am doing wrong?
Click to expand...
Click to collapse
How long are you letting it sit on the boot logo screen?
---------- Post added at 12:03 PM ---------- Previous post was at 12:03 PM ----------
live4nyy said:
Which recovery are you using? Try just wiping before and not after. I have not tried either of those ROMs but the CM7 Mod states to just do a wipe beforehand and not after. Maybe that might help.
Click to expand...
Click to collapse
I never had any problems wiping before and after with any ROM.
live4nyy said:
Which recovery are you using? Try just wiping before and not after. I have not tried either of those ROMs but the CM7 Mod states to just do a wipe beforehand and not after. Maybe that might help.
Click to expand...
Click to collapse
Using Rom Racer Recovery
upwards of 5 minutes, does the atrix take longer than that to boot the files?
I've heard upwards of ten minutes but any longer than that it prob didn't work.
sonikot said:
upwards of 5 minutes, does the atrix take longer than that to boot the files?
Click to expand...
Click to collapse
live4nyy said:
I've heard upwards of ten minutes but any longer than that it prob didn't work.
Click to expand...
Click to collapse
Yeah I left it for a hour when i came back still no go. but the fruitcake is only 1 minute as usual w/ roms
Bump anyone with ideas.
U could double check the phone specs make sure you have the right rom/country/phone combo also could try flash fauxs kernals they tend to work on most devices also did your touch screen seem broken or messed up could need to reflash the pds partion: ) .Img in advanced restore settings
Sent from my MB860 using xda premium
long story short ......with the new beats audio news out i flashed that and got stuck at the M logo on boot.
I pulled the battery plugged in and booted but still the same, stuck at M logo. Why is my bootstrap not working? i used it earlier today.
I also tried getting into the stock android recovery but then it just gets stuck at the android guy next to the triangle with the ! in the middle.
How do i get back into bootstrap so i can flash my nandroid backup! Thanks guys!
p.s. i have tried it numerous times hoping it would eventually work but nothing.
droid x2
2.3.4
rooted
stock rom
Did you flash the zrecovery before you rebooted?
http://forum.xda-developers.com/showthread.php?t=1426062
Might save you next time
Also if you wiped data your bootstrap will be gone.
not sure what zrecovery is?
i have the bootstrap recovery installed and have been using that for months without a hitch, just after i flashed the beats audio zip this morning (in bootstrap), i can't get it to even boot. im stuck at the M logo. and if i pull the battery and plug in, it won't even start up to bootstrap. I just want to flash my nandroid backup
i didn't wipe data, just flashed the zip. chose reboot in Bootstrap like normal and bam, stuck at M logo.....any way to force back into bootstrap? I was literally just in bootstrap 1 hr ago so i know its there....just not loading
Not that I aware of besides doing a sbf rooting again and installing bootstrap and then you can restore your nano back up.
Be sure to pull the battery for 30 sec put back and then plug in to get cwr to boot. Or Then try to access stock recov pwr on & rocker down to wipe data.
Thanks for the help!
As far as I know, the only way to get into bootstrap is through the bootstrap app itself. Which you need to be able to get into your phone to do. I do think you can get into it by rebooting while plugged in but maybe this doesnt work if you did something to mess up the startup. As was mentioned already, your only choice most likely is to SBF, root and install bootstrap again and then restore your backup.
I beg to differ. As long as charge mode was never put back to normal which is also a mistake.
jsgraphicart said:
As far as I know, the only way to get into bootstrap is through the bootstrap app itself. Which you need to be able to get into your phone to do. I do think you can get into it by rebooting while plugged in but maybe this doesnt work if you did something to mess up the startup. As was mentioned already, your only choice most likely is to SBF, root and install bootstrap again and then restore your backup.
Click to expand...
Click to collapse
if u have BSR installed and u haven't wiped data or flashed any new ROM, u can just power down/battery pull and u will boot into BSR, it hijacks charge only mode
Sent from my DROID X2 using Tapatalk
sending out an SBF, my God there are great tutorials here in General and Android Dev sections... Cwr is not part of DX2 BSR is, but you wiped and lost that. To enter stock Android Recovery you just hit power button volume down...but that won't help you now...so just SBF and root then restore your backed up material through Titanium backup.... Install BSR and NANDroid back...you did make NANDroid backups I assume, if not I suggest starting to. Good luck
Dee Ex Two - See Em Seven
viskey said:
long story short ......with the new beats audio news out i flashed that and got stuck at the M logo on boot.
I pulled the battery plugged in and booted but still the same, stuck at M logo. Why is my bootstrap not working? i used it earlier today.
I also tried getting into the stock android recovery but then it just gets stuck at the android guy next to the triangle with the ! in the middle.
How do i get back into bootstrap so i can flash my nandroid backup! Thanks guys!
p.s. i have tried it numerous times hoping it would eventually work but nothing.
droid x2
2.3.4
rooted
stock rom
Click to expand...
Click to collapse
sending out an SBF, my God there are great tutorials here in General and Android Dev sections... Cwr is not part of DX2 BSR is, but you wiped and lost that. To enter stock Android Recovery you just hit power button volume down...but that won't help you now...so just SBF and root then restore your backed up material through Titanium backup.... Install BSR and NANDroid back...you did make NANDroid backups I assume, if not I suggest starting to. Good luck
Dee Ex Two - See Em Seven
ashclepdia said:
if u have BSR installed and u haven't wiped data or flashed any new ROM, u can just power down/battery pull and u will boot into BSR, it hijacks charge only mode
Sent from my DROID X2 using Tapatalk
Click to expand...
Click to collapse
Thats what I thought. But the OP cant get that to work from what I get. Is that method still supposed to work if you cant even boot the phone?
As long as you do not wipe data BSR should be installed. If you pull battery and put it back in before you even try to boot plug it in to wall charger. This will take you straight to BSR before you ever try to boot. Then you can get back to your nano back up.
"I also tried getting into the stock android recovery but then it just gets stuck at the android guy next to the triangle with the ! in the middle."
@ the triangle Push the middle of the rocker to get to stock recovery. (both up and down at same time)
skwoodwiva said:
"I also tried getting into the stock android recovery but then it just gets stuck at the android guy next to the triangle with the ! in the middle."
@ the triangle Push the middle of the rocker to get to stock recovery. (both up and down at same time)
Click to expand...
Click to collapse
Good advice skoodwiva. Is is safe to use stock recovery? If so why do we have a special one?
Sent from my MB870 using XDA App
king..kranium said:
Good advice skoodwiva. Is is safe to use stock recovery? If so why do we have a special one?
Sent from my MB870 using XDA App
Click to expand...
Click to collapse
Stock recovery wont allow you to flash stuff to the phone or backup your ROM or stuff like that. Thats why we have a special one to do those things.
Stock is good for flashing an ota (no need to rename just make it start w/ a number so it will be first in a mess of zips at the root of your external sd)
And wiping data.
jsgraphicart said:
Thats what I thought. But the OP cant get that to work from what I get. Is that method still supposed to work if you cant even boot the phone?
Click to expand...
Click to collapse
I'm not sure...been a while since I got to M logo stuck without wiping data or doing something that trashes BSR which would make it not work...
by the way viskey
what it's this "beats" zip u flashed??
by the way viskey
what it's this "beats" zip u flashed??[/QUOTE]
I was wondering the same thing.
I was curious to see how ICS worked so I finally gave in and flashed Black Widow ROM. I followed this exact instructions:
Requirements:
•Android Version 2.3.6 (6.12.17x - 6.12.181)
•Safestrap 1.09 or Bootstrap v2 (safestrap 1.07 will not work)
•Download and move zip/s to sdcard-ext
•Reboot into Recovery
•Create a Backup! (dont say i didnt warn you)
•YOU MUST Wipe Data/Factory Reset
•Wipe Cache partition
•(in Advanced) Wipe Dalvik cache
•(in Mounts and Storages) Format System
•Install zip from sdcard
•Flash ROM (do not flash Gapps or DarkGapps)
•Reboot System now
This isn't my first time using Bootstrap. I flashed many ROMs using it on my D2. It installed and then I rebooted. Now it sits on the screen with Motorola symbol with Dual Core Technogoly. I did make a backup but I'd really like to use this ROM before reverting back. Any suggestions?
JDunc said:
I was curious to see how ICS worked so I finally gave in and flashed Black Widow ROM. I followed this exact instructions:
Requirements:
•Android Version 2.3.6 (6.12.17x - 6.12.181)
•Safestrap 1.09 or Bootstrap v2 (safestrap 1.07 will not work)
•Download and move zip/s to sdcard-ext
•Reboot into Recovery
•Create a Backup! (dont say i didnt warn you)
•YOU MUST Wipe Data/Factory Reset
•Wipe Cache partition
•(in Advanced) Wipe Dalvik cache
•(in Mounts and Storages) Format System
•Install zip from sdcard
•Flash ROM (do not flash Gapps or DarkGapps)
•Reboot System now
This isn't my first time using Bootstrap. I flashed many ROMs using it on my D2. It installed and then I rebooted. Now it sits on the screen with Motorola symbol with Dual Core Technogoly. I did make a backup but I'd really like to use this ROM before reverting back. Any suggestions?
Click to expand...
Click to collapse
If it's stuck at the M logo you'll probably have to RSDLite back to GB. Remember, that M logo can be there for up to 5 to 6 minutes on the first boot, if that's not applicable then fastboot that bad larry back! (I got to be VERY proficient at flashing back, let me know if you need help)
Is there anyway I can get my phone in working order without having to RSD back to GB? I don't understand why it didn't work when I follow the instructions and I have experience in flashing.
JDunc said:
Is there anyway I can get my phone in working order without having to RSD back to GB? I don't understand why it didn't work when I follow the instructions and I have experience in flashing.
Click to expand...
Click to collapse
I haven't really messed with Safestrap or bootstrap that much, I tend to just run one OS. The problem is that you can't even get to the start up screen for those. Simple when you think about it, right now (if i understand correctly) you're stuck at the M, which leaves you only 1 possible way out of that screen and that's to send it to recovery which will only wipe or RSD your phone.
Anyone else think of any other options that he has or experience with this ROM??
Yea I went to stock recovery to wipe data/cache just to see what happened. Of course that didn't do anything. In order to RSD, what screen do I need to be on? I assume the screen its frozen on will not be the screen I need.
JDunc said:
Yea I went to stock recovery to wipe data/cache just to see what happened. Of course that didn't do anything. In order to RSD, what screen do I need to be on? I assume the screen its frozen on will not be the screen I need.
Click to expand...
Click to collapse
You'll need to hold down both Vol buttons when you power it up then go to AP Fastboot. Do you need a link to the tutorial? You can YouTube RSDLite DROID RAZR and should get plenty. Let me know if you need any additional info.
Sent from my DROID RAZR using XDA
I think I can figure the rest out. That's all I really needed to know. Thanks!
Also MAKE SURE you're at at least 50% battery!!
Sent from my DROID RAZR using XDA
Not sure how I can check this....phone was on 66% before ROM install but screen is stuck on and I don't know how to power off phone. Battery is draining but more than likely slowly.
This was a previous post on another thread and from what I understand it works:
"Try following Steps:
Boot in AP Fastboot > Connect your Wall Charger > Press Power
If you're a lucky your RazR will pass the red M and jump into the Battery Screen.
If your system is broken, you have to order an Factory Cable. With this you can flash the correct system signed or use the modded Utility for CDMA Leaks, to get your Phone back to life."
When they say "Factory Cable" is this not just a USB cable?
Nope. Its different from what i understand. Thanks for reminding me to get one on eBay before all the ICS madness starts. Lol.
I mean you can risk it but I've never had to mess with it as I'm almost always above 70% so I'm kinda out of the loop on that problem.
Sent from my DROID RAZR using XDA
I tried what you said...Went to AP Fastboot and it only goes back to the Motorola screen. So am I completely screwed here? Thought I need that screen to RSD?
JDunc said:
I tried what you said...Went to AP Fastboot and it only goes back to the Motorola screen. So am I completely screwed here? Thought I need that screen to RSD?
Click to expand...
Click to collapse
You just need to get to the AP fastboot screen then flash it. I think you'll be okay to flash. I've seen people do it with 40%. Just make sure as soon as it boots you put that puppy on the charger.
Should take about 15-20 mins. If you're gonna do it, best to do it sooner rather than later.
Sent from my DROID RAZR using XDA
I don't even know if I can get to that AP Fastboot screen. When I try it, it does nothing and goes back to my Motorola screen. I'm about to be off work so I can see what happens when I have a laptop around.
Yeah you're gonna need the laptop. Also, when you select AP fastboot you'll want to hit the vol+ button to select it. Hitting the power button just restarts the phone. Vol+ = Enter. That's probably what you did the first time.
Sent from my DROID RAZR using XDA
Indeed it is. Maybe I can try the charger now.
Yeah, its like learning a foreign language sometimes but with only 3 physical buttons they have to make do. Lol!
Sent from my DROID RAZR using XDA
JDunc said:
Not sure how I can check this....phone was on 66% before ROM install but screen is stuck on and I don't know how to power off phone. Battery is draining but more than likely slowly.
Click to expand...
Click to collapse
Hold the power button and volume down to force a hardware reboot.
Sent from my DROID RAZR using XDA
It's actually Power button + volume up and down and yes I've done this.
Hey folks,
So the end of Q3 came with no ICS so I decided it was time to learn about modding these phones. I have modded Xboxes etc so I figured I would try to take this on.
My Phone:
AT&T MB860 bone stock with 4591 on it when I started.
I was able to unlock the phone following a tutorial on youtube. Then I tried to reflash CWM and CM7 using AUTOMATIC_UNLOCK_V4.2. Thats where things went wrong. The phone got stuck at the Dual core screen (to be honest I might not have waited 10 minutes after flashing).
So now here I am the battery is drained so I am using a cut off USB cable for power. When the phone is booting it says "unlocked" in the top left corner I can access all of the menus. When I choose recovery the phone boots into ClockWork Mod recovery. I am hoping I am half way there and the kind folks here can guide me to the finish. If not I'm open to starting from scratch whichever is going to be fastest. I'll attach a few pics for reference
Mycotopian said:
Hey folks,
So the end of Q3 came with no ICS so I decided it was time to learn about modding these phones. I have modded Xboxes etc so I figured I would try to take this on.
My Phone:
AT&T MB860 bone stock with 4591 on it when I started.
I was able to unlock the phone following a tutorial on youtube. Then I tried to reflash CWM and CM7 using AUTOMATIC_UNLOCK_V4.2. Thats where things went wrong. The phone got stuck at the Dual core screen (to be honest I might not have waited 10 minutes after flashing).
So now here I am the battery is drained so I am using a cut off USB cable for power. When the phone is booting it says "unlocked" in the top left corner I can access all of the menus. When I choose recovery the phone boots into ClockWork Mod recovery. I am hoping I am half way there and the kind folks here can guide me to the finish. If not I'm open to starting from scratch whichever is going to be fastest. I'll attach a few pics for reference
Click to expand...
Click to collapse
(I went through this today, I needed to use option 6 in automatic unlock 4.2 before I could get a Rom on my phone.) this was wrong, tried so many things I got confused, go to this thread:
[Unlocked Only][RECOVERY][2011-11-14] Custom CWM-based Recovery 5.0.2.7-atrix5 in ATRIX android development
and download one of the zipped recoveries, flash through recovery to get a modified CWM that left me install a Rom. I was stuck at the same screen as you before I did this now I'm up and running with MROM.
Your recovery is too old. Get a newer version of CWM. Try flashing this. If you can't you will have to fastboot flash a newer recovery.
Flash ROMs with CWM, not automated tools. CWM is the safest way. As soon as you get a new recovery installed create a backup. Good luck!
okay guys I'm jammed up I download the file CWM_Atrix4G_5.0.2.0 and copied it to a clean microsd. Then I went through the recovery menu
Install zip from sdcard>choose zip from sdcard>
In the next folder list I am unable to find the CWM file. Any tips on how to get the file straight onto the phones internal flash? Maybe through RSD?
Dude, you're trying to install recovery from the recovery... Doesn't really make sense, does it?
Use fastboot instead.
Avoid RSD at all costs.
ravilov said:
Dude, you're trying to install recovery from the recovery... Doesn't really make sense, does it?
Use fastboot instead.
Avoid RSD at all costs.
Click to expand...
Click to collapse
You can't do a first install of recovery from recovery. But you can update (assuming recovery is functioning - even partially).
upndwn4par said:
You can't do a first install of recovery from recovery. But you can update (assuming recovery is functioning - even partially).
Click to expand...
Click to collapse
Yeah, I know. You posted a flashable ZIP, the only one I am aware of.
I'd still recommend a standard fastboot flash though.
ravilov said:
Yeah, I know. You posted a flashable ZIP, the only one I am aware of.
I'd still recommend a standard fastboot flash though.
Click to expand...
Click to collapse
Huh? The only one? Did you search?
upndwn4par said:
Huh? The only one? Did you search?
Click to expand...
Click to collapse
No... Not really.
Hey, I said "that I'm aware of".
ravilov said:
No... Not really.
Hey, I said "that I'm aware of".
Click to expand...
Click to collapse
I have flashed recovery with fastboot exactly once - when I unlocked by bootloader. Ever since it has been flashable zips.
Okay I successfully flashed the new recovery to v5.0.2. Then I chose "apply /sdcard/update.zip" I received the "Install from sdcard complete message" I then chose "+Go Back+" then "reboot". The phone rebooted and sat at the logo with "unlocked" in the corner for a few minutes. I thought maybe I needed to clear it by pulling the battery for a few seconds, which I did. then I let it sit on my desk for 20 minutes at the logo screen.
do need to go in and clear cache? is there another file I should try to flash?
Any input would be appreciated.
Mycotopian said:
Okay I successfully flashed the new recovery to v5.0.2. Then I chose "apply /sdcard/update.zip" I received the "Install from sdcard complete message" I then chose "+Go Back+" then "reboot". The phone rebooted and sat at the logo with "unlocked" in the corner for a few minutes. I thought maybe I needed to clear it by pulling the battery for a few seconds, which I did. then I let it sit on my desk for 20 minutes at the logo screen.
do need to go in and clear cache? is there another file I should try to flash?
Any input would be appreciated.
Click to expand...
Click to collapse
You probably need to re-flash your ROM.
Wipe data, cache, Dalvik, then flash ROM.
upndwn4par said:
You probably need to re-flash your ROM.
Wipe data, cache, Dalvik, then flash ROM.
Click to expand...
Click to collapse
I ran the wipe, cache, davlik then reran the update.zip.
I am still stuck at dual core screen with unlocked the corner.
Mycotopian said:
I ran the wipe, cache, davlik then reran the update.zip.
I am still stuck at dual core screen with unlocked the corner.
Click to expand...
Click to collapse
Umm... That would just install the recovery again. You need to flash a ROM. Seems like your boot partition (aka. the kernel) is borked.
ravilov said:
Umm... That would just install the recovery again. You need to flash a ROM. Seems like your boot partition (aka. the kernel) is borked.
Click to expand...
Click to collapse
Success!
Thank you to everyone that helped.
Now that its done is there a link to outline what all my new perks and features are now that I am rooted and running?
Mycotopian said:
Success!
Thank you to everyone that helped.
Now that its done is there a link to outline what all my new perks and features are now that I am rooted and running?
Click to expand...
Click to collapse
I just installed CM7 on my Atrix last week. Don't forget to install gapps like I did. I had to install them as a zip from the recovery, but I think it's also possible to use the ROM Manager app.
Look for the Google Apps section on this thread: forum.xda-developers.com/showthread.php?t=1257574 This will have the Market (now Google Play) so you can download more apps.
After that, play with all the features! I started with Menu > Settings > CyanogenMod Settings and started playing around. Don't play with the performance settings without knowing what they do.
Also, Make a backup! Make a backup! Make a backup! It may save you when little else will.
Sent from my MB860 using xda app-developers app
Mycotopian said:
Success!
Thank you to everyone that helped.
Now that its done is there a link to outline what all my new perks and features are now that I am rooted and running?
Click to expand...
Click to collapse
Awesome! Enjoy!