So I have recently Flashed ARCTIC ROM and it all went bad, was stuck and bootloop and forgot to flash CWM recovery, so only had access to Motorola Recovery. After lots of research and time I managed to fix my phone here is how:
PLEAS BE AWARE: This is for GSM Droid Razr XT910, if you are using a CDMA Razr, you will need a different Fastboot file.
Download this fastboot file on your pc & extract the file:
http://sbf.droid-developers.org/umts...stboot.xml.zip
Then download RSD lite from here & install it on your pc:
https://www.box.com/...6p1ll45svunalr3
Install moto drivers on your pc here it is:
https://www.box.com/...it95qz8yjunedrg
*********************
Now open the Rsd lite on pc, browse an XML file that you extracted from fastboot files and put it on rsd,
Turn of your phone, click on vol- vol+ & power buttons at the same time, now you entered to boot menu,
Select Ap fastboot (vol- to scroll & vol+ to select)
Then connect phone to the pc via usb port,
When you see "connected" in rsd lite, click on start key on rsd & be patient to flashing fastboot files, it takes about 7-8 minutes. If you get an error, it means you have the wrong fastboot file, you must have the original fastboot file you had on your phone, ie UK must flash UK fastboot, EU must flash EU version etc.
Thank you zeidof for all your help, who told me how to do this!
Newbieshwa said:
So I have recently Flashed ARCTIC ROM and it all went bad, was stuck and bootloop and forgot to flash CWM recovery, so only had access to Motorola Recovery. After lots of research and time I managed to fix my phone here is how:
PLEAS BE AWARE: This is for GSM Droid Razr XT910, if you are using a CDMA Razr, you will need a different Fastboot file.
Download this fastboot file on your pc & extract the file:
http://sbf.droid-developers.org/umts...stboot.xml.zip
Then download RSD lite from here & install it on your pc:
https://www.box.com/...6p1ll45svunalr3
Install moto drivers on your pc here it is:
https://www.box.com/...it95qz8yjunedrg
*********************
Now open the Rsd lite on pc, browse an XML file that you extracted from fastboot files and put it on rsd,
Turn of your phone, click on vol- vol+ & power buttons at the same time, now you entered to boot menu,
Select Ap fastboot (vol- to scroll & vol+ to select)
Then connect phone to the pc via usb port,
When you see "connected" in rsd lite, click on start key on rsd & be patient to flashing fastboot files, it takes about 7-8 minutes. If you get an error, it means you have the wrong fastboot file, you must have the original fastboot file you had on your phone, ie UK must flash UK fastboot, EU must flash EU version etc.
Thank you zeidof for all your help, who told me how to do this!
Click to expand...
Click to collapse
loooool, nice copy/paste
you are welcome
Sent from my XT910 using Tapatalk
Thank you very much sirs above, your post will hopefully fix my problems with my phone. I will try it, and write here.
Thanks
PS: Could you fix the links? They don't work.
It worked, that's awesome. Thank you a lot.
Is there a way to get The Arctic on to your phone without this happening? Or why did that happen to me?
Thanks for your nice guide, I am new to motirola and i wanted to flash a custom rom but how I choose correct fast boot file and CMR. boot loader unlock etc.I am from Saudi Arabia
Android version-2.3.5
B band - U_03.1C.85P
Build no.-6.5.1.73
System - 6.5.1.21.XT910.ME
dewage said:
Thanks for your nice guide, I am new to motirola and i wanted to flash a custom rom but how I choose correct fast boot file and CMR. boot loader unlock etc.I am from Saudi Arabia
Android version-2.3.5
B band - U_03.1C.85P
Build no.-6.5.1.73
System - 6.5.1.21.XT910.ME
Click to expand...
Click to collapse
i bricked my phone revcently...even i need the corect stock rom..can any one give me the link to me retail phone ie middle east????
bricked
anyone know where I can purchase the charger needed to charge my droid razr after bricking and battery dying while restoring via RSD? see picture attached
the fastboot link is not working for me
rahulwadhwani said:
the fastboot link is not working for me
Click to expand...
Click to collapse
Whatz your current rom?
Which fastboot u wanna install?
Sliced by my Razr on Tapatalk
for people looking for fastboot to use in the guide above:
http://forum.xda-developers.com/showthread.php?t=1362956
How about mac users? I think the do not need drivers right?
If you use safestrap recovery you have a better chance of not bricking your phone. It works awesome and recommend to anybody who flashes roms a lot. Im not too sure if it works for xt910, but it works awesome on my xt912.
http://forum.xda-developers.com/showthread.php?t=1391900
Sent from my DROID RAZR using XDA
zeidof said:
Whatz your current rom?
Which fastboot u wanna install?
Sliced by my Razr on Tapatalk
Click to expand...
Click to collapse
My current ROM is Cynogenmod 9.0 4.0.3 and I wanna downgrade back to 2.3.6 I don't know how to do that. I am badly stuck
I tried to download the tools and every link said 404 not found.... any help with this ?
My RSD Lite only supports .sbf, shx and hs files, no XML files that are in fastboot zip. Wrong version of RSD Lite or am I missing something?
br Zola
ZolaSlo said:
My RSD Lite only supports .sbf, shx and hs files, no XML files that are in fastboot zip. Wrong version of RSD Lite or am I missing something?
br Zola
Click to expand...
Click to collapse
Are you using RSD 5.7? 5.6+ Should work fine.
Thanks for all the stuff but: If i'm stuck at the Dual core technology screen, how can i turn my device off?
What a life saver man....thanx a lot
Syriochan said:
Thanks for all the stuff but: If i'm stuck at the Dual core technology screen, how can i turn my device off?
Click to expand...
Click to collapse
Hold the -Vol and the power button to force the device off.
now i am back to stock unrooted os. If i root my phone again will i still be able to get the forthcoming official update this month for my RAZR XT910?
Related
in this thread, i will upload flashable Radio.img for GSM Razr
********************************************
do you have fastboot package?
you have to make a folder in local disc C (c:// fastboot) & extract the fastboot package into this folder
fastboot package for Windows
fastbootpackage for Linux 64bit
fastbootpackage for Linux 32bit
Click to expand...
Click to collapse
********************************************
iNSTRUCTION:
1- download the Radio.img u want to install & put it in Fastboot folder
2- run a command & go to fastboot folder
(cd/
cd fastboot)
3- put your phone on AP Fastboot mod [turn of the phone => hold vol+ &vol- & power at the same time => choose AP fastboot (vol- to scroll & vol+ to select)]
4- connect the phone to pc via USB
5- Use the related code for each radio
6- thank me
***********************************
DOWNLOADS:
A. Radio U_03.1C83P from 6.5.1-73_23-SPU-11_SIGNEuropeAustraliaEMEA
Code:
cd/
cd fastboot
fastboot flash radio Radio.img
fastboot reboot
B. Radio U_03.1C.85P from 6.5.1-73_30-SPU-11_SIGNEuropeAustraliaEMEA
Code:
cd/
cd fastboot
fastboot flash radio Radio.img
fastboot reboot
C.RadioU_03.1C.23P from Version: 65.88.13 China retail
Code:
cd/
cd fastboot
fastboot flash radio RadioU_03.1C.23P.img
fastboot reboot
Nice work zeidof
Sent from my XT910 using Tapatalk
What is this for?
WHat does it do? DOes it work on Stock ROM? I've got Stock ROM but phone is rooted.
inheme said:
What is this for?
Click to expand...
Click to collapse
cheekrox said:
WHat does it do? DOes it work on Stock ROM? I've got Stock ROM but phone is rooted.
Click to expand...
Click to collapse
C78P radio had some issues & there was a problem with text messaging, this can solve text messaging issues, this Radio is stronger than 78P, also this Radio is from 2.3.6 OTA update,
And yes cheekrox, u can flash it on your rooted stock rom
Sent from my XT910 using Tapatalk
Your radios can be inserted into the EternityProject ROMs Thread as they, yup, they're unofficial packages, but flashing official radios.
We should only be sure that those packages are working.
op is updated
im getting horrible speed with 85P
Edit: hey buddy, i sent you a PM, please advise, TIA
thanksgiving60 said:
im getting horrible speed with 85P
Edit: hey buddy, i sent you a PM, please advise, TIA
Click to expand...
Click to collapse
Really? I on the other hand have incredible speed increase with the 85P radio. Using it with .150 update.
Sent from my XT910 using Tapatalk
ales100i said:
Really? I on the other hand have incredible speed increase with the 85P radio. Using it with .150 update.
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
sorry, i should have stated that im currently residing in asia, maybe thats why the bad speed with this European radio
Does this work with The Arctic?
I can confirm that Radio U_03.1C.85P flashed fine on 150.1 rom. Will post my results.
Teşekkürler kardeşim.
pajn said:
Does this work with The Arctic?
Click to expand...
Click to collapse
It does on my german device.
Hi there:
I when through and flash the 85P in the Latin America firmware from Brasil that is posted in the forum. The flash apparently did when through, the phone rebooted, enter the recovery mode with the little android, it changed to a triangle with an exclamation sign and later on rebooted just fine and I have signal. In the about phone, the baseband number still appears as the old one. Is that a sign that the flash does not indeed when through, or it is just a build.pro thing. Any code on the dialer to check what baseband is running on the phone??
[Q] # fastboot flash radio new_radio.img ? YES YOU CAN! :)
Is it possible to use Android SDK's tool; fastboot ?
Of course the RAZR is in AP Fastboot mode. . I am only using GNU/Linux and usually I use the fastboot tool to flash my N1's radio.
Example
Code:
# fastboot flash radio new_radio.img
Updates:
YES! I able to flash the radio with the fastboot method.
Anyway, do it at your own risk!.
Thank you.
pajn said:
Does this work with The Arctic?
Click to expand...
Click to collapse
It should be work
ellopr said:
Hi there:
I when through and flash the 85P in the Latin America firmware from Brasil that is posted in the forum. The flash apparently did when through, the phone rebooted, enter the recovery mode with the little android, it changed to a triangle with an exclamation sign and later on rebooted just fine and I have signal. In the about phone, the baseband number still appears as the old one. Is that a sign that the flash does not indeed when through, or it is just a build.pro thing. Any code on the dialer to check what baseband is running on the phone??
Click to expand...
Click to collapse
no it didn't installed, you can extract the radio.img file & apply in cmd via fastboot
bahathir said:
Is is possible to use Android SDK's tool; fastboot ?
Example
Code:
# fastboot flash radio new_radio.img
Thank you.
Click to expand...
Click to collapse
Sure, you can do that,
After unzipping the file, rename the radio file to "radio.img",
Then go on with "fastboot flash radio radio.img"
Sent from my XT910 using Tapatalk
I flashed it with fastboot but same thing happen. I got a ok sending and writing radio at cmd and the phone booted to the little android screen. The bar started to fill up, at haft of it the icon changed to a triangle with an exclamation point. After some second it rebooted and in the about I still have the same old baseband information from the Latin American Fastboot file that is here in the forums, not the new one as 85P.
zeidof said:
no it didn't installed, you can extract the radio.img file & apply in cmd via fastboot
Click to expand...
Click to collapse
Thank you.
Please add the fastboot method in your 1st post.
2nd question:
Is it possible to downgrade the firmware after installing higher version of the firmware.
Example:
If my current radio firmware version is ...78P and upgraded to 85P. Then, I want to downgrade to 73P again... is this possible?
Tips:
To make life easier, you can put the RAZR directly into AP Fastboot mode using # adb reboot bootloader while the RAZR is up running.
In my case, after the fastbott flash ... RAZR displayed the Android robot and open box, with progress bar. After few minutes, it restarted normally.
Remember to md5sum the radio.img file before flashing. The md5 value is in the .xml file.
bahathir said:
In my case, after the fastbott flash ... RAZR displayed the Android robot and open box, with progress bar. After few minutes, it restarted normally.
Remember to md5sum the radio.img file before flashing. The md5 value is in the .xml file.
Click to expand...
Click to collapse
Mine start with the open box, at like half the progress bar it changes to the triangle with the question Mark. Tgen after maybe 10 seconds it reboots
Sent from my XT910 using XDA App
I found this one click radio flasher software on a chinese forum
the program itself is in chinese but it is as straightforward as it gets
download the file
unzip
make sure you have the usb drivers installed on your pc
enter AP fastboot mode
connect your phone to your pc
enter 1 for 78P radio 2 for 83P, or 3 for 85P
hit enter
it will start the flashing process (this part will be in english)
it will reboot automatically when its done
http://www.multiupload.com/PN9XDBQBTX
Hey guys,
So I flashed the Arctic ROM, but now it is stuck on bootloop. I forgot to flash CWM Recovery so from what I have read I have to use FastBoot?
I am using a Droid Razr XT910 EU GSM version.
Any help would be so appreciated!
If I need to use Gsm Xt910 Razr Utility anyone have a mirror to current download link or mediafire link as current one is very slow and will take over 1 day to download!
Thanks again!
SOLVED
Push and hold vol down + vol up & power at the same time for 10 seconds to exit bootloop, push them again to go to boot menu,
Now you can flash your fastboot files
Sliced by my Razr on Tapatalk
Sorry for noob question. How do I flash fastboot files? Do i need to place on ext SD?
Also do you have a DL link for fastboot files for 2.3.6 EU, cant seem to find.
Many thanks!
How do I set up ADB so Droid Razr is recognized in FastBoot in RSD lite?
Sliced by my Razr on Tapatalk
Newbieshwa said:
Sorry for noob question. How do I flash fastboot files? Do i need to place on ext SD?
Also do you have a DL link for fastboot files for 2.3.6 EU, cant seem to find.
Many thanks!
Click to expand...
Click to collapse
ul find it in the Android development section.
the fastboot files u just extract onto computer in a folder of your choice, when u browse using rsd lite ul b looking for the .xml file within that folder.
adb think u can go to motorola website to download the drivers, on your phone go to settings - applications - development - then tick the USB debugging option.
hope it helps!!
Sent from my XT910 using XDA App
Okay so i fixed the battery problem on my last thread and i got the factory cable and charged it to 100 percent. So i flashed the fastboot file. It worked but it keeps getting to the droid eye and then freezes and then it restarts the boot animation. HELP! what do i do? oh and i have the verizon xt912 razr
You have matching rom and kernel? That usually causes that kind of problems.
Try reset factory defaults with recovery?
Try another suitable fastboot file?
I think that a reset to factory default ll help u.
Beeyoth said:
Okay so i fixed the battery problem on my last thread and i got the factory cable and charged it to 100 percent. So i flashed the fastboot file. It worked but it keeps getting to the droid eye and then freezes and then it restarts the boot animation. HELP! what do i do? oh and i have the verizon xt912 razr
Click to expand...
Click to collapse
HAHA
gunness1991 said:
HAHA
Click to expand...
Click to collapse
This is funny why?
Use Mattlgroff's 1.51 utility and see if that will help you.
flashman2002 said:
Use Mattlgroff's 1.51 utility and see if that will help you.
Click to expand...
Click to collapse
Great utility. Used myself many times.
http://forum.xda-developers.com/showthread.php?t=1526113
Try going into fastboot mode and flash a fastboot file acording to your residence. If you need more detail on it let me know where you stay (country) and I can assist you
Good Luck
Jeanjacq said:
Try going into fastboot mode and flash a fastboot file acording to your residence. If you need more detail on it let me know where you stay (country) and I can assist you
Good Luck
Click to expand...
Click to collapse
Hey boet,
Any luck on finding a fastboot file for Korea hey?
Been searching for months
Use RSD Lite and Razr fastboot to restore phone.
Go here: rootzwiki.com/topic/13566-droid-razr-fastboot-file/
download
2.3.6 VRZ_XT912_6.5.1-167_DHD-14_M2-5_CFC_1FF_01.xml.zip
and
RSD Lite 5.6
Extract .zip file. Follow instructions from site above to run RSD Lite with phone in AP Fastboot mode; flash .xml file.
To get into AP Fastboot mode. Hold down both Volume up and Volume down simultaneously. With both volume buttons held down press power button.
Select AP Fastboot with volume down key. Then press volume up key to select AP Fastboot.
*If you get OEM Warning when running RSD Lite. You need to extract .zip file and find .xml file. Open and remove oem lines from file and then re-run in RSD Lite and select .xml file.
*Here is another unbrick guide:
Ive been finding a solution to unbrick my xt909...,
at first Ive thought that I can flash my device with a xt910 firmware but it came out that Ive bricked my phone
flash failure/boot failure and cannot even access to recovery mode
Here's what I did:
using RSD Lite I flash the device with an empty radio.img to rid out the boot failure and again flash my device using the droid razr utility 1.7
with 6.16.211..., it came out to be successful and now I can manage to boot my device recovery mode...
but... My problem is when everytime I update my device with any 6.16.211 update.zip I get a "signature verification failed"
Help here please
19lilsaiNt68 said:
Ive been finding a solution to unbrick my xt909...,
at first Ive thought that I can flash my device with a xt910 firmware but it came out that Ive bricked my phone
flash failure/boot failure and cannot even access to recovery mode
Here's what I did:
using RSD Lite I flash the device with an empty radio.img to rid out the boot failure and again flash my device using the droid razr utility 1.7
with 6.16.211..., it came out to be successful and now I can manage to boot my device recovery mode...
but... My problem is when everytime I update my device with any 6.16.211 update.zip I get a "signature verification failed"
Help here please
Click to expand...
Click to collapse
I don't know if this is a silly question or not, but did the md5 match before trying to flash the fastboot file?
xt909 completely unbricked
pastorbennett said:
I don't know if this is a silly question or not, but did the md5 match before trying to flash the fastboot file?
Click to expand...
Click to collapse
I really dont know..., but as for now Ive managed to unbrick my xt909 by erasing my CID and flashing another boot image and rom ^^
perfectly running at ICS 4.0.4
I'll post the steps soon....
Nice :good:
Whirleyes bricked his Razr XT909 too
Maybe this would help him
here are the steps
TheBoris said:
Nice :good:
Whirleyes bricked his Razr XT909 too
Maybe this would help him
Click to expand...
Click to collapse
atleast 80% battery
droid rarz utility 1.7
rsd lite
fastboot.exe or any fastboot command line tool
and some patience :laugh:
1st - extract droid razr utility and find the mbmloader named " allow-mbmloader-flashing-mbm"
2nd - enter fastboot and flash the mbm... here's how
( fastboot.exe flash mbmloader allow-mbmloader-flashing-mbm.bin)
3rd - reboot
( fastboot.exe reboot-bootloader)
4th - erase the Contact I.D No.
(fastboot.exe erase cid) (fastboot.exe reboot-bootloader)
of course with a erased CID you'll never be able to turn on your phone into normal mode but still can gain access to fastboot
5th - download and flash the XT912 fastboot file
HTML:
http://sbf.droid-developers.org/cdma_spyder/VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml.zip
6th - just wait and have some coffee
and youre done...,
PLS READ
The only way to power up your phone is by entering BP TOOLS
ONE MORE THING
NOW YOUR XT909 can read local sim's CHEERS FOR THIS
because Im from the philippines and I use locak prepaid sim
Thanks.. It work for me too.
I have flash this file before, but I forgot to boot with bp-tools, that's why I only got black screen
I'm glad for you :thumbup:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
whirleyes said:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
Click to expand...
Click to collapse
is there any way I can flash a new CID? because I forgot to backup my CID...,
so every time I want to open up my device I always go to into BP TOOLS
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
HSD-Pilot said:
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
Click to expand...
Click to collapse
can you pls teach me how to do that?
Thanks to whirleyes for his boot manager..., now I no longer need to go to BP TOOL everytime I want to turn on my phone
can i try it to xt9010??
whirleyes said:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
Click to expand...
Click to collapse
Could you tell me how to do this?
XT909 flash XT910 fastboot file,I think It doesn't work on CDMA net,
Did your work OK?
hi,brother.may i know your prepaid sim card is what?cdma or gsm? thx
could u help me?
hi,19lilsaiNt68.
I have a KDDI IS12M cellphone just like you. And I also bricked it.
In your way,I tried to flash the file "allow-mbmloader-flashing-mbm.bin", but I got a error message said:" INFOimage bigger than partition / Failed". However, the command "fastboot flash mbm allow-mbmloader-flashing-mbm.bin " Can be executed.Then I erased my CID and I tried to flash XT912 fastboot file. In this step:"flash devtree",the screen showed the message:validation failure.
That is my biggest problem and now I don't know how to fix it. Could you help me? Thanks a lot!
Help
HSD-Pilot said:
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
Click to expand...
Click to collapse
Hi, do i need to format my CID is there no way of get a backup, i have done alot on my device that am even i tired. The fast boot also gives the same error " INFOimage bigger than partition / Failed", Can someone just walk us through.
i erased my cid and fastboot with the VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml it worked now am out of fastboot mode, but i get a boot loop. help me
wk4life said:
i erased my cid and fastboot with the VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml it worked now am out of fastboot mode, but i get a boot loop. help me
Click to expand...
Click to collapse
Are you Encode from twit?
The problem is you flashed an ICS Rom. Try that first:
Boot into stock recovery and perform a factory reset. If it boots, ok. If it doesn't boot you should flash Jelly Bean. Just grab that one from VZW at sbf.droid-developers.org.
DON'T FLASH EU JB! Otherwise you won't be able to DOWNGRADE or switch to another region rom because it has the highest secure version compared to all others.
This is VZW JB: http://sbf.droid-developers.org/cdma_spyder/cdma_spyder_9.8.2O-72_VZW-16_1ff.xml.zip
dtrail1 said:
Are you Encode from twit?
The problem is you flashed an ICS Rom. Try that first:
Boot into stock recovery and perform a factory reset. If it boots, ok. If it doesn't boot you should flash Jelly Bean. Just grab that one from VZW at sbf.droid-developers.org.
DON'T FLASH EU JB! Otherwise you won't be able to DOWNGRADE or switch to another region rom because it has the highest secure version compared to all others.
This is VZW JB: http://sbf.droid-developers.org/cdma_spyder/cdma_spyder_9.8.2O-72_VZW-16_1ff.xml.zip
Click to expand...
Click to collapse
That is what i am currently using and i am getting the boot loop back, Yeah this @EnCode_1
first let me say I do not have a RAZR and have searched. I have a friend who was rooted, tried to unroot and install the OTA JB update. He is now stuck in fastboot. His PC will recognize his phone but doesn't show as available like it should. (I have the Note 2 and mine shows under "computer" when connected). he's tried running the razr utility and it fails then says he's back on original version. He can get into bootloader but not into recovery. He says it back the to AP Fastboot screen and then it says boot failed. He was rooted but on stock. he tried to install the JB update both OTA and through his external SD card. can anyone help? does the razr not use odin?
I don't understand exactly your problem. Would you like to flash stock ROM with fastboot recovery? Then you have to
1) install latest Motorola driver package
2) install RSD lite tool
3) boot phone to fastboot recovery
4) connect USB to computer
5) download fastboot package of you choice, exctract it and choose included xml-file in RSD lite
6) start flash and wait until it's finished
he's stuck in a repeat boot. he told me it was a fastboot but I didn't clarify if that meant it was a regular repeat boot screen or if it was the fastboot recovery screen. I didn't realize how different the razr was from my samsung phones. sorry if I am not making sense. He's in SC and I'm in AR so I am only going on what he is telling me.
I assume that he stucks in fastboot recovery.
The only chance to get the device working again is to flash ICS stock ROM with RSD lite.
AcidAngel21 said:
I assume that he stucks in fastboot recovery.
The only chance to get the device working again is to flash ICS stock ROM with RSD lite.
Click to expand...
Click to collapse
can you point me to where I can tell him how to do this? and with links to install please too thank you!
Try this: http://www.droidrzr.com/index.php/t...inux-all-in-one/page__pid__227369#entry227369
http://forum.xda-developers.com/showthread.php?t=2155576
Check out 2nd video.
I would also post links to fastboot files, motorola driver package and RSD-Lite, but unfortunately I'm not allowed to do with <10 posts
By the way, are you XT910 (GSM) or XT912 (CDMA) user?
Would you like to flash ICS or JB?
Note that for JB no fastboot files exits up to now. JB can not be flashed with RSD-Lite.