Ive been finding a solution to unbrick my xt909...,
at first Ive thought that I can flash my device with a xt910 firmware but it came out that Ive bricked my phone
flash failure/boot failure and cannot even access to recovery mode
Here's what I did:
using RSD Lite I flash the device with an empty radio.img to rid out the boot failure and again flash my device using the droid razr utility 1.7
with 6.16.211..., it came out to be successful and now I can manage to boot my device recovery mode...
but... My problem is when everytime I update my device with any 6.16.211 update.zip I get a "signature verification failed"
Help here please
19lilsaiNt68 said:
Ive been finding a solution to unbrick my xt909...,
at first Ive thought that I can flash my device with a xt910 firmware but it came out that Ive bricked my phone
flash failure/boot failure and cannot even access to recovery mode
Here's what I did:
using RSD Lite I flash the device with an empty radio.img to rid out the boot failure and again flash my device using the droid razr utility 1.7
with 6.16.211..., it came out to be successful and now I can manage to boot my device recovery mode...
but... My problem is when everytime I update my device with any 6.16.211 update.zip I get a "signature verification failed"
Help here please
Click to expand...
Click to collapse
I don't know if this is a silly question or not, but did the md5 match before trying to flash the fastboot file?
xt909 completely unbricked
pastorbennett said:
I don't know if this is a silly question or not, but did the md5 match before trying to flash the fastboot file?
Click to expand...
Click to collapse
I really dont know..., but as for now Ive managed to unbrick my xt909 by erasing my CID and flashing another boot image and rom ^^
perfectly running at ICS 4.0.4
I'll post the steps soon....
Nice :good:
Whirleyes bricked his Razr XT909 too
Maybe this would help him
here are the steps
TheBoris said:
Nice :good:
Whirleyes bricked his Razr XT909 too
Maybe this would help him
Click to expand...
Click to collapse
atleast 80% battery
droid rarz utility 1.7
rsd lite
fastboot.exe or any fastboot command line tool
and some patience :laugh:
1st - extract droid razr utility and find the mbmloader named " allow-mbmloader-flashing-mbm"
2nd - enter fastboot and flash the mbm... here's how
( fastboot.exe flash mbmloader allow-mbmloader-flashing-mbm.bin)
3rd - reboot
( fastboot.exe reboot-bootloader)
4th - erase the Contact I.D No.
(fastboot.exe erase cid) (fastboot.exe reboot-bootloader)
of course with a erased CID you'll never be able to turn on your phone into normal mode but still can gain access to fastboot
5th - download and flash the XT912 fastboot file
HTML:
http://sbf.droid-developers.org/cdma_spyder/VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml.zip
6th - just wait and have some coffee
and youre done...,
PLS READ​
The only way to power up your phone is by entering BP TOOLS
ONE MORE THING​
NOW YOUR XT909 can read local sim's CHEERS FOR THIS
because Im from the philippines and I use locak prepaid sim
Thanks.. It work for me too.
I have flash this file before, but I forgot to boot with bp-tools, that's why I only got black screen
I'm glad for you :thumbup:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
whirleyes said:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
Click to expand...
Click to collapse
is there any way I can flash a new CID? because I forgot to backup my CID...,
so every time I want to open up my device I always go to into BP TOOLS
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
HSD-Pilot said:
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
Click to expand...
Click to collapse
can you pls teach me how to do that?
Thanks to whirleyes for his boot manager..., now I no longer need to go to BP TOOL everytime I want to turn on my phone
can i try it to xt9010??
whirleyes said:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
Click to expand...
Click to collapse
Could you tell me how to do this?
XT909 flash XT910 fastboot file,I think It doesn't work on CDMA net,
Did your work OK?
hi,brother.may i know your prepaid sim card is what?cdma or gsm? thx
could u help me?
hi,19lilsaiNt68.
I have a KDDI IS12M cellphone just like you. And I also bricked it.
In your way,I tried to flash the file "allow-mbmloader-flashing-mbm.bin", but I got a error message said:" INFOimage bigger than partition / Failed". However, the command "fastboot flash mbm allow-mbmloader-flashing-mbm.bin " Can be executed.Then I erased my CID and I tried to flash XT912 fastboot file. In this step:"flash devtree",the screen showed the message:validation failure.
That is my biggest problem and now I don't know how to fix it. Could you help me? Thanks a lot!
Help
HSD-Pilot said:
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
Click to expand...
Click to collapse
Hi, do i need to format my CID is there no way of get a backup, i have done alot on my device that am even i tired. The fast boot also gives the same error " INFOimage bigger than partition / Failed", Can someone just walk us through.
i erased my cid and fastboot with the VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml it worked now am out of fastboot mode, but i get a boot loop. help me
wk4life said:
i erased my cid and fastboot with the VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml it worked now am out of fastboot mode, but i get a boot loop. help me
Click to expand...
Click to collapse
Are you Encode from twit?
The problem is you flashed an ICS Rom. Try that first:
Boot into stock recovery and perform a factory reset. If it boots, ok. If it doesn't boot you should flash Jelly Bean. Just grab that one from VZW at sbf.droid-developers.org.
DON'T FLASH EU JB! Otherwise you won't be able to DOWNGRADE or switch to another region rom because it has the highest secure version compared to all others.
This is VZW JB: http://sbf.droid-developers.org/cdma_spyder/cdma_spyder_9.8.2O-72_VZW-16_1ff.xml.zip
dtrail1 said:
Are you Encode from twit?
The problem is you flashed an ICS Rom. Try that first:
Boot into stock recovery and perform a factory reset. If it boots, ok. If it doesn't boot you should flash Jelly Bean. Just grab that one from VZW at sbf.droid-developers.org.
DON'T FLASH EU JB! Otherwise you won't be able to DOWNGRADE or switch to another region rom because it has the highest secure version compared to all others.
This is VZW JB: http://sbf.droid-developers.org/cdma_spyder/cdma_spyder_9.8.2O-72_VZW-16_1ff.xml.zip
Click to expand...
Click to collapse
That is what i am currently using and i am getting the boot loop back, Yeah this @EnCode_1
Related
So I have recently Flashed ARCTIC ROM and it all went bad, was stuck and bootloop and forgot to flash CWM recovery, so only had access to Motorola Recovery. After lots of research and time I managed to fix my phone here is how:
PLEAS BE AWARE: This is for GSM Droid Razr XT910, if you are using a CDMA Razr, you will need a different Fastboot file.
Download this fastboot file on your pc & extract the file:
http://sbf.droid-developers.org/umts...stboot.xml.zip
Then download RSD lite from here & install it on your pc:
https://www.box.com/...6p1ll45svunalr3
Install moto drivers on your pc here it is:
https://www.box.com/...it95qz8yjunedrg
*********************
Now open the Rsd lite on pc, browse an XML file that you extracted from fastboot files and put it on rsd,
Turn of your phone, click on vol- vol+ & power buttons at the same time, now you entered to boot menu,
Select Ap fastboot (vol- to scroll & vol+ to select)
Then connect phone to the pc via usb port,
When you see "connected" in rsd lite, click on start key on rsd & be patient to flashing fastboot files, it takes about 7-8 minutes. If you get an error, it means you have the wrong fastboot file, you must have the original fastboot file you had on your phone, ie UK must flash UK fastboot, EU must flash EU version etc.
Thank you zeidof for all your help, who told me how to do this!
Newbieshwa said:
So I have recently Flashed ARCTIC ROM and it all went bad, was stuck and bootloop and forgot to flash CWM recovery, so only had access to Motorola Recovery. After lots of research and time I managed to fix my phone here is how:
PLEAS BE AWARE: This is for GSM Droid Razr XT910, if you are using a CDMA Razr, you will need a different Fastboot file.
Download this fastboot file on your pc & extract the file:
http://sbf.droid-developers.org/umts...stboot.xml.zip
Then download RSD lite from here & install it on your pc:
https://www.box.com/...6p1ll45svunalr3
Install moto drivers on your pc here it is:
https://www.box.com/...it95qz8yjunedrg
*********************
Now open the Rsd lite on pc, browse an XML file that you extracted from fastboot files and put it on rsd,
Turn of your phone, click on vol- vol+ & power buttons at the same time, now you entered to boot menu,
Select Ap fastboot (vol- to scroll & vol+ to select)
Then connect phone to the pc via usb port,
When you see "connected" in rsd lite, click on start key on rsd & be patient to flashing fastboot files, it takes about 7-8 minutes. If you get an error, it means you have the wrong fastboot file, you must have the original fastboot file you had on your phone, ie UK must flash UK fastboot, EU must flash EU version etc.
Thank you zeidof for all your help, who told me how to do this!
Click to expand...
Click to collapse
loooool, nice copy/paste
you are welcome
Sent from my XT910 using Tapatalk
Thank you very much sirs above, your post will hopefully fix my problems with my phone. I will try it, and write here.
Thanks
PS: Could you fix the links? They don't work.
It worked, that's awesome. Thank you a lot.
Is there a way to get The Arctic on to your phone without this happening? Or why did that happen to me?
Thanks for your nice guide, I am new to motirola and i wanted to flash a custom rom but how I choose correct fast boot file and CMR. boot loader unlock etc.I am from Saudi Arabia
Android version-2.3.5
B band - U_03.1C.85P
Build no.-6.5.1.73
System - 6.5.1.21.XT910.ME
dewage said:
Thanks for your nice guide, I am new to motirola and i wanted to flash a custom rom but how I choose correct fast boot file and CMR. boot loader unlock etc.I am from Saudi Arabia
Android version-2.3.5
B band - U_03.1C.85P
Build no.-6.5.1.73
System - 6.5.1.21.XT910.ME
Click to expand...
Click to collapse
i bricked my phone revcently...even i need the corect stock rom..can any one give me the link to me retail phone ie middle east????
bricked
anyone know where I can purchase the charger needed to charge my droid razr after bricking and battery dying while restoring via RSD? see picture attached
the fastboot link is not working for me
rahulwadhwani said:
the fastboot link is not working for me
Click to expand...
Click to collapse
Whatz your current rom?
Which fastboot u wanna install?
Sliced by my Razr on Tapatalk
for people looking for fastboot to use in the guide above:
http://forum.xda-developers.com/showthread.php?t=1362956
How about mac users? I think the do not need drivers right?
If you use safestrap recovery you have a better chance of not bricking your phone. It works awesome and recommend to anybody who flashes roms a lot. Im not too sure if it works for xt910, but it works awesome on my xt912.
http://forum.xda-developers.com/showthread.php?t=1391900
Sent from my DROID RAZR using XDA
zeidof said:
Whatz your current rom?
Which fastboot u wanna install?
Sliced by my Razr on Tapatalk
Click to expand...
Click to collapse
My current ROM is Cynogenmod 9.0 4.0.3 and I wanna downgrade back to 2.3.6 I don't know how to do that. I am badly stuck
I tried to download the tools and every link said 404 not found.... any help with this ?
My RSD Lite only supports .sbf, shx and hs files, no XML files that are in fastboot zip. Wrong version of RSD Lite or am I missing something?
br Zola
ZolaSlo said:
My RSD Lite only supports .sbf, shx and hs files, no XML files that are in fastboot zip. Wrong version of RSD Lite or am I missing something?
br Zola
Click to expand...
Click to collapse
Are you using RSD 5.7? 5.6+ Should work fine.
Thanks for all the stuff but: If i'm stuck at the Dual core technology screen, how can i turn my device off?
What a life saver man....thanx a lot
Syriochan said:
Thanks for all the stuff but: If i'm stuck at the Dual core technology screen, how can i turn my device off?
Click to expand...
Click to collapse
Hold the -Vol and the power button to force the device off.
now i am back to stock unrooted os. If i root my phone again will i still be able to get the forthcoming official update this month for my RAZR XT910?
Hello guys,
Let me preface this with the fact that I have been searching this forum for the past hour and could not find anything pertinent for my situation.
I've updated to the latest GSM OTA (the Vodafone EU one) and all was great, decided to reboot my phone and got into a bootloop. I don't have a recovery to boot from and going to be short on battery soon.
The way I see it, I'm stuck with a bricked phone until the RSD package for the OTA is released. Is that correct? am I missing anything?
Can anyone point me to a relevant thread where I can catch a break?
Cheers!
tuxcomputing said:
Hello guys,
Let me preface this with the fact that I have been searching this forum for the past hour and could not find anything pertinent for my situation.
I've updated to the latest GSM OTA (the Vodafone EU one) and all was great, decided to reboot my phone and got into a bootloop. I don't have a recovery to boot from and going to be short on battery soon.
The way I see it, I'm stuck with a bricked phone until the RSD package for the OTA is released. Is that correct? am I missing anything?
Can anyone point me to a relevant thread where I can catch a break?
Cheers!
Click to expand...
Click to collapse
Fixed, please close.
How did you fixed it?
Sent from my XT910 using xda premium
Please tell us how you fixed this, i have same problem but i already screwed it up more by trying to flash back to ics after i was stuck at boot on JB vodafone. Now i have bricked phone and i wait for Fastboot files, which we dont know when will come out
Got the same problem here
Alright, here goes.
I am not responsible to whatever happens to your phones. This process is described for the Vodafone OTA.
Also, you will lose root
I'm guessing your phones are in a constant bootloop right about now. If they are, you have to make sure you still have some battery left so that on AP Fastboot it shows battery OK. If you don't, follow the guides here to get more juice or get a 'factory cable' and charge your phone.
To download:
- Fastboot from here: http://dfiles.eu/files/bih3tmg7b
- OTA kernel (here: http://d-h.st/xat )
- The whole OTA here ON YOUR SDCARD
- original ICS RSD Image here
Process:
Extract the fastboot somewhere accessible like c:/fastboot
Extract the kernel and the original ICS files on your desktop
Copy the OTA kernel (boot_3.0.8-g7198280) to your c:/fastboot folder
Copy 'system_signed' from the original ICS archive to your fastboot folder
Open the command prompt (search for cmd.exe in your programs)
Navigate to c:/fastboot (use "cd .." to excape a folder and "dir" to list the files in a folder )
Go to AP fastboot on your phpne and do the following from the command prompt:
fastboot flash boot boot_3.0.8-g7198280.img
fastboot flash system system_signed
fastboot reboot-bootloader
Now restart your phone and enter recovery the normal way volUp+volDown + power button then select Recovery, then volUp+volDown to see the menu.
Do a factory reset
Flash the OTA (that should be on your card)
Reboot
Ta-da!
If after the whole process you get a flash failure when rebooting your phone, use this guide to get rid of that: http://forum.xda-developers.com/showthread.php?t=1634223
If this helped you, please show the 'Thanks' button some love. Also, post here if you run into trouble, DO NOT PM!
tuxcomputing said:
Alright, here goes.
I am not responsible to whatever happens to your phones. This process is described for the Vodafone OTA.
Also, you will lose root
I'm guessing your phones are in a constant bootloop right about now. If they are, you have to make sure you still have some battery left so that on AP Fastboot it shows battery OK. If you don't, follow the guides here to get more juice or get a 'factory cable' and charge your phone.
To download:
- Fastboot from here: http://dfiles.eu/files/bih3tmg7b
- OTA kernel (here: http://d-h.st/xat )
- The whole OTA here ON YOUR SDCARD
- original ICS RSD Image here
Process:
Extract the fastboot somewhere accessible like c:/fastboot
Extract the kernel and the original ICS files on your desktop
Copy the OTA kernel (boot_3.0.8-g7198280) to your c:/fastboot folder
Copy 'system_signed' from the original ICS archive to your fastboot folder
Open the command prompt (search for cmd.exe in your programs)
Navigate to c:/fastboot (use "cd .." to excape a folder and "dir" to list the files in a folder )
Go to AP fastboot on your phpne and do the following from the command prompt:
fastboot flash boot boot_3.0.8-g7198280.img
fastboot flash system system_signed
fastboot reboot-bootloader
Now restart your phone and enter recovery the normal way volUp+volDown + power button then select Recovery, then volUp+volDown to see the menu.
Do a factory reset
Flash the OTA (that should be on your card)
Reboot
Ta-da!
If after the whole process you get a flash failure when rebooting your phone, use this guide to get rid of that: http://forum.xda-developers.com/showthread.php?t=1634223
If this helped you, please show the 'Thanks' button some love. Also, post here if you run into trouble, DO NOT PM!
Click to expand...
Click to collapse
I tried your method but I get a:
Preflash validating failure
when writing the system_signed to the device
pirondello said:
I tried your method but I get a:
Preflash validating failure
when writing the system_signed to the device
Click to expand...
Click to collapse
That's weird. Prolly the flash was messed up somewhere..
Try this before "fastboot flash boot boot_3.0.8-g7198280.img":
extract recovery_signed and allow-mbmloader-flashing-mbm.bin from the ICS folder and put them into the fastboot folder
do this
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot flash recovery recovery_signed
Let me know if that works
tuxcomputing said:
That's weird. Prolly the flash was messed up somewhere..
Try this before "fastboot flash boot boot_3.0.8-g7198280.img":
extract recovery_signed and allow-mbmloader-flashing-mbm.bin from the ICS folder and put them into the fastboot folder
do this
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot flash recovery recovery_signed
Let me know if that works
Click to expand...
Click to collapse
Unfortunately still the same problem, can't flash the system_signed file.
Really appreciate your help, thank you anyway!
tuxcomputing said:
That's weird. Prolly the flash was messed up somewhere..
Try this before "fastboot flash boot boot_3.0.8-g7198280.img":
extract recovery_signed and allow-mbmloader-flashing-mbm.bin from the ICS folder and put them into the fastboot folder
do this
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot flash recovery recovery_signed
Let me know if that works
Click to expand...
Click to collapse
Well i give you thumbs up and thanks for you helping hand, however it still doesnt work gives preflashvalidation failure on system_signed flashing. If you have some more ideas it would be really nicce to try, meanwhile i think we will just have to wait for fastboot files. Verizon version for xt912 got FF already maybe we will get ours in a week or so.
Use this method .. Hsd pilot again nailed it to save our asses ..
It should definatly unbrick your mobile because i tried it on same version and i am back on jellybean ..
http://forum.xda-developers.com/showthread.php?t=2194825
Hit the thx to hsd pilot on the op and me if ya think i helped ya to share link :thumbup:
Thx in advance btw
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
Edit: Always refresh before you reply
anurag.dj2u said:
Use this method .. Hsd pilot again nailed it to save our asses ..
It should definatly unbrick your mobile because i tried it on same version and i am back on jellybean ..
http://forum.xda-developers.com/showthread.php?t=2194825
Hit the thx to hsd pilot on the op and me if ya think i helped ya to share link :thumbup:
Thx in advance btw
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
Click to expand...
Click to collapse
Didn't work for me. Flashing went fine but when trying to enter recovery I get "Invalid Flash Mode (S) (Boot Failure)
HSD-Pilot said:
Edit: Always refresh before you reply
Click to expand...
Click to collapse
Sorry again :thumbdown:
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
No, you was first, i mean myself
HSD-Pilot said:
No, you was first, i mean myself
Click to expand...
Click to collapse
TeddyOFLove said:
Well i give you thumbs up and thanks for you helping hand, however it still doesnt work gives preflashvalidation failure on system_signed flashing. If you have some more ideas it would be really nicce to try, meanwhile i think we will just have to wait for fastboot files. Verizon version for xt912 got FF already maybe we will get ours in a week or so.
Click to expand...
Click to collapse
For your information, I managed to unbrick my phone. Problem seemed to be my CID.IMG. After erasing it, I could enter recovery and installl JB from ext-sdcard. Now I have to use BP Tools tools to boot, because as soon as I restore CID, the device doesn't boot.
Really strange, because my phone is actually from Europe (d/a/ch), Switzerland. Maybe it's due to the fact that I switched to the chinese JB Ota leak before updating to the EU leak.
first let me say I do not have a RAZR and have searched. I have a friend who was rooted, tried to unroot and install the OTA JB update. He is now stuck in fastboot. His PC will recognize his phone but doesn't show as available like it should. (I have the Note 2 and mine shows under "computer" when connected). he's tried running the razr utility and it fails then says he's back on original version. He can get into bootloader but not into recovery. He says it back the to AP Fastboot screen and then it says boot failed. He was rooted but on stock. he tried to install the JB update both OTA and through his external SD card. can anyone help? does the razr not use odin?
I don't understand exactly your problem. Would you like to flash stock ROM with fastboot recovery? Then you have to
1) install latest Motorola driver package
2) install RSD lite tool
3) boot phone to fastboot recovery
4) connect USB to computer
5) download fastboot package of you choice, exctract it and choose included xml-file in RSD lite
6) start flash and wait until it's finished
he's stuck in a repeat boot. he told me it was a fastboot but I didn't clarify if that meant it was a regular repeat boot screen or if it was the fastboot recovery screen. I didn't realize how different the razr was from my samsung phones. sorry if I am not making sense. He's in SC and I'm in AR so I am only going on what he is telling me.
I assume that he stucks in fastboot recovery.
The only chance to get the device working again is to flash ICS stock ROM with RSD lite.
AcidAngel21 said:
I assume that he stucks in fastboot recovery.
The only chance to get the device working again is to flash ICS stock ROM with RSD lite.
Click to expand...
Click to collapse
can you point me to where I can tell him how to do this? and with links to install please too thank you!
Try this: http://www.droidrzr.com/index.php/t...inux-all-in-one/page__pid__227369#entry227369
http://forum.xda-developers.com/showthread.php?t=2155576
Check out 2nd video.
I would also post links to fastboot files, motorola driver package and RSD-Lite, but unfortunately I'm not allowed to do with <10 posts
By the way, are you XT910 (GSM) or XT912 (CDMA) user?
Would you like to flash ICS or JB?
Note that for JB no fastboot files exits up to now. JB can not be flashed with RSD-Lite.
hello guys i know there is a lot of thread speaking about solve this problem but i guess mine need some helps from your do this is what i have ben done
phone get stuck into the moto logo
-boot loader locked i ve downloaded the 4547-fix-try2.sbf to unlocked the boot loader whit rsd lite (using rsd lite 5.7)
-get the unlocked
-downloades this 2
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf.gz
flash whit rsd lite but the 2 said the same thing failed to boot 1
any ideas
I hope you didn't flash them like this? You did remember to uncompress them?
no i already after downloaded it i uncompressed them them i loaded to rds lite to begin the process any idea to solve my problem?
luismrosa said:
no i already after downloaded it i uncompressed them them i loaded to rds lite to begin the process any idea to solve my problem?
Click to expand...
Click to collapse
1. Why didn't you just flash the unlocking sbf? Why did you have to flash a stock sbf?
2. What version of GB were you on?
Sent from my MB860 using xda app-developers app
first of all the phone was gifted to me and i don't really know what version of android was installed i just flsh the sbf according i was reading on the internet so i decide to flash it back to stock cause the phone at the first time just not boot it get stuck at moto logo , try to go to android recovery but it didnt get to it so i decide to flash a stock sbf when i flashed whit rsd lite 5.7 the phone i got the phone message failure to boot 1, before that i ve unlocked the bootloader and in order to boot whit the unlocked message in the phone and the way to to enter to the oders option like fastboot, rds, android recover , cause when i get the failure to boot 1 i couldn't to go to any of that option just rds when it say failure to boot 1 and fastboot ............ anyway it any procedure o sbf o else to get the phone back to stock o flash a custom rom that work
luismrosa said:
first of all the phone was gifted to me and i don't really know what version of android was installed i just flsh the sbf according i was reading on the internet so i decide to flash it back to stock cause the phone at the first time just not boot it get stuck at moto logo , try to go to android recovery but it didnt get to it so i decide to flash a stock sbf when i flashed whit rsd lite 5.7 the phone i got the phone message failure to boot 1, before that i ve unlocked the bootloader and in order to boot whit the unlocked message in the phone and the way to to enter to the oders option like fastboot, rds, android recover , cause when i get the failure to boot 1 i couldn't to go to any of that option just rds when it say failure to boot 1 and fastboot ............ anyway it any procedure o sbf o else to get the phone back to stock o flash a custom rom that work
Click to expand...
Click to collapse
flashing a sbf is the only way to return to stock. Fruitcake ROMs are stock ROMs that are flashed like a normal ROM. Which sbf did you flash?
Generally, failure to boot 1 puts you in rsd mode automatically. Flash the pudding sbf and then follow up with fastboot oem unlock. You should be good to go.
Sent from my MB860 using xda app-developers app
ok i ve flashed the 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf.gz when i flash the sbf whrn the phone restart i get this on the rsd lite failed flashing process.phone [0000]:error switching phone to BP past through mode [0x70BE]
BTW i have oem unlock the bootloader via fastboot when the starts it said unlocked so what next now
luismrosa said:
ok i ve flashed the 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf.gz when i flash the sbf whrn the phone restart i get this on the rsd lite failed flashing process.phone [0000]:error switching phone to BP past through mode [0x70BE]
BTW i have oem unlock the bootloader via fastboot when the starts it said unlocked so what next now
Click to expand...
Click to collapse
Off hand i don't know what that error means, but a simple google search will give you the answer. If you already are unlocked, then you can flash a custom recovery and a fruitcake ROM to get you back to stock without actually flashing the sbf.
Sent from my MB860 using xda app-developers app
i right now flashed whit rds lite 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf but i still getting the failure boot 1 them i ran the automatic to unlocked the boot loader again the phone reboot then it stay in moto logo and unlocked message nothing more it do
luismrosa said:
i right now flashed whit rds lite 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf but i still getting the failure boot 1 them i ran the automatic to unlocked the boot loader again the phone reboot then it stay in moto logo and unlocked message nothing more it do
Click to expand...
Click to collapse
Have you flashed a custom recovery via fastboot?
Sent from my MB860 using xda app-developers app
yess i try that but when i try to loaded rebooting the phone a entering to the android recovery it stay freeze dont do anything
How do you flashed recovery?
Enviado desde mi MB860
simple i ve flashed it via fastboot ive done via adb android sdk fastboot erase recovery and fastboot flash recovery name then when i try to enter to the android recovery it just stay freeze or reboot
Ok, then what recovery did you flash?
To be on the safe side, if it wasn't RomRacer's CWM, you should try with that.
ok i will try that one BTW is necessary that the battery is full charge
No, but is highly recommended
Enviado desde mi MB860
i still getting the failed to boot 1 after the sbf for att was flash after that y flash the 4547-fix-try2.sbf to unlocked the bootloader for take of the failed to boot 1 but the phone after that it reboots an stay ther freezee
luismrosa said:
i still getting the failed to boot 1 after the sbf for att was flash after that y flash the 4547-fix-try2.sbf to unlocked the bootloader for take of the failed to boot 1 but the phone after that it reboots an stay ther freezee
Click to expand...
Click to collapse
ok, the full sbf returns the phone to stock. the fix sbf opens the door to unlock the bootloader. after that you need to get into fastboot and run the command "fastboot oem unlock" without quotation marks. a code will pop up on your screen. re-enter the command, followed by the code, and hit enter.
ok after that the phone turns on whit the unlocked message but still frezze in the M logo
luismrosa said:
ok after that the phone turns on whit the unlocked message but still frezze in the M logo
Click to expand...
Click to collapse
Reaching out to everyone else on this post, but after we did the sbf and fastboot command, didn't we boot up normally? Is there something i'm missing here to help this user out?
Sent from my DROIDX using xda app-developers app
First : sorry about my bad english
Hi, i have a Motorola Droid Razr XT909 from Japan, my phone have a problem and can't boot , it only stop at fastboot screen. I try to install another rom, but i can't flash kernel boot.img
AP Fastboot Flash Mode (S) ( Flash Failure)
0A.6C
To return to normal mode - first press power key to poser down
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Click to expand...
Click to collapse
i Follow here http://forum.xda-developers.com/showthread.php?t=2483999 but i can't found my phone's rom in there, i search for this on gg and found this http://pan.baidu.com/share/link?shareid=1275147586&uk=3909257495 but it's protect by password and i can't unzip .
So:
Anyone have this password? or another link?
cugia1991 said:
found this http://pan.baidu.com/share/link?shareid=1275147586&uk=3909257495 but it's protect by password and i can't unzip .
So:
Anyone have this password? or another link?
Click to expand...
Click to collapse
Recently I had downloaded that file and unzip it normally without password and any problems.
You can read my history of flashing xt909: http://forum.xda-developers.com/showthread.php?p=50559788
Try to flash xt912 firmware. I think it can help you. And don't do like me: don't flash xt910's 4.1.2 firmware.
virusalone said:
Recently I had downloaded that file and unzip it normally without password and any problems.
You can read my history of flashing xt909: http://forum.xda-developers.com/showthread.php?p=50559788
Try to flash xt912 firmware. I think it can help you. And don't do like me: don't flash xt910's 4.1.2 firmware.
Click to expand...
Click to collapse
tks so much.
i had erase cid and flash rom xt912 :laugh:
but have to use a USB Factory Cable