i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
KevandLynds said:
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not actually true. It just needs to be a working micro USB cable. I use a generic micro USB cable (originally for a BlackBerry, I think) for all my flashing. Works fine.
this doesnt work guys, iv tried 3 different usb cables. nothing is happening it just wont connect. is it a way of installing a usb driver for my phone so it will reckonise my phone??
please help some one need help
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
blackgf said:
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
Click to expand...
Click to collapse
Yes i tried all that with no luck i just cant get my phone connected to my laptoo if i could I
could unbrick
Check for Windoze updates if you're unable to get your PC & phone to recognise each other after trying the obvious (different USB ports, different cables, different versions of Odin, making sure Kies/its processes aren't running in Task Manager on PC. Try *all* of these).
This has solved the issue for a few people over the last week or so. Failing that, uninstall Kies from your PC, reboot, redownload it, reinstall it, reboot & try again.
If that doesn't work, try a different PC.
Bratcher123 said:
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
Click to expand...
Click to collapse
This method not required to connect your mobile to PC.
Just need external sdcard and ics based recovery
If you are ics recovery version , we can come from this issue.
1, download any ics ROM ( stock based ) and copy to your external sdcard.
2, root the mobile using this way
http://forum.xda-developers.com/showthread.php?t=1501719
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel
3, as per the above guide once you flashed cwm.zip , you will get cwm based recovery screen.
4, wipe system and cache
5, install the custom ROM from external sdcard
I believe this method will work for you.
All the best
Sent from my GT-I9100 using XDA
sendhiloo7 said:
I believe this method will work for you.
Click to expand...
Click to collapse
I believe it won't since he bricked his device and can't even start the phone.
Do what MistahBungle said + make sure that you install Kies first so that you have the proper drivers for Odin.
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
That's nice.
Now have you tried the other suggestions that have been made ? If your phone & PC can't/won't recognise each other, you need to fix that first. Forget about CW not working. It's not relevant. You're not going to fix this without an Odin flash and making that happen should be your focus/priority.
Bratcher123 said:
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
Click to expand...
Click to collapse
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Might be. Try the (many) suggestions on the first page. Any one of those could be/resolve the problem. In addition to those suggestions, you can also try uninstalling Kies on your PC, rebooting, re-downloading it, reinstalling it, rebooting & then seeing if your PC & phone recognise each other.
But definitely try those other suggestions first.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
trell959 said:
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
Click to expand...
Click to collapse
I use Siyah, and have no such problems.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
grungysquash said:
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
Click to expand...
Click to collapse
That doesnt help as Odin doesnt recognise the phone in Download mode.
crunchie-uk said:
That doesnt help as Odin doesnt recognise the phone in Download mode.
Click to expand...
Click to collapse
+1 10char.....
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
AntAust1513 said:
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Well I thought of that, but none of us can get into recovery at all.
Sent from my SGH-I897 using XDA
Related
Hi guys,
I have a problem that's fairly common but I can't get it right
I can't install new drivers for my SGS2, my pc/laptop don't recognize it anymore.
I have flashed an ICS rom before so I also tried the Nexus S drivers, no success.
I have tried to work with Android SDK manager but since my laptop can't find my phone, it won't find it as an adb device.
I managed to get back on 2.3.3 via CWM manager but my USB jig also doesn't work anymore.
I have tried everything regarding Kies and new drivers so I'm pretty much out of hope... Anyone with suggestions?
You could use mobile odin, also if you flash back to ics you can reset counter with triangleaway and then flash back to gb
Sent from my sgs2 running cm9 using xda app
Makrilli said:
You could use mobile odin, also if you flash back to ics you can reset counter with triangleaway and then flash back to gb
Sent from my sgs2 running cm9 using xda app
Click to expand...
Click to collapse
Problem is that I can't flash back the old bootloader..
I think the logical step would be to try another PC, given you've tried everything else & nothing has worked.
You could also maybe try Heimdall (search for it on here).
Also, if you haven't tried different USB cables (in particular the one that came with the phone), give that a shot. Also make sure you're connecting the phone to a powered/mainboard USB port & not a hub port. Also, try toggling USB debugging in your phone settings.
That's about all I got. Try these things if you haven't already, but definitely try another PC.
MistahBungle said:
I think the logical step would be to try another PC, given you've tried everything else & nothing has worked.
You could also maybe try Heimdall (search for it on here).
Also, if you haven't tried different USB cables (in particular the one that came with the phone), give that a shot. Also make sure you're connecting the phone to a powered/mainboard USB port & not a hub port. Also, try toggling USB debugging in your phone settings.
That's about all I got. Try these things if you haven't already, but definitely try another PC.
Click to expand...
Click to collapse
I have tried different ports with different cables, different pc also won't install the drivers.
Usb debugging on/off doesn't work either.
Going to try heimdall today but it has something to do with my phone since I flashed so many files before with my pc and with my laptop.
Will post after I tried.
Yeah it sounds like a phone issue given you have been able to flash firmware with that PC previously. Good luck with Heimdall, fingers crossed for you.
Gepstra said:
I have tried different ports with different cables, different pc also won't install the drivers.
Usb debugging on/off doesn't work either.
Going to try heimdall today but it has something to do with my phone since I flashed so many files before with my pc and with my laptop.
Will post after I tried.
Click to expand...
Click to collapse
MistahBungle said:
Yeah it sounds like a phone issue given you have been able to flash firmware with that PC previously. Good luck with Heimdall, fingers crossed for you.
Click to expand...
Click to collapse
Nope, heimdall can't recognize my phone either.
Running out of ideas here.
I guess there isn't an option to flash the old bootloader other than Odin huh?
Unfortunately Mobile Odin can't flash bootloaders yet, so Odin (and probably Heimdall) are your only options. Either way you're going to need USB.
Gepstra said:
I guess there isn't an option to flash the old bootloader other than Odin huh?
Click to expand...
Click to collapse
hmm okay, well thanks for the help anyways.
Maybe I will send it to mobiletechvideos.com for repair.
MistahBungle said:
Unfortunately Mobile Odin can't flash bootloaders yet, so Odin (and probably Heimdall) are your only options. Either way you're going to need USB.
Click to expand...
Click to collapse
My PC recently stopped working properly it connects but always fails flashing via Odin, I managed to set up Odin etc on GF laptop so at least I can use Odin if needed. Could you not try restoring your PC to earlier date and see if that works or uninstall everything to do with phone, kies, Odin adb etc and do a fresh install of everything
Sent from my GT-I9100 using Tapatalk
seanicca said:
My PC recently stopped working properly it connects but always fails flashing via Odin, I managed to set up Odin etc on GF laptop so at least I can use Odin if needed. Could you not try restoring your PC to earlier date and see if that works or uninstall everything to do with phone, kies, Odin adb etc and do a fresh install of everything
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
My phone doesn't connect at all.
I have tried uninstalling everything including drivers and such via USBDeview.
The problem lies with the phone itself I think, not my pc.
I think I have found the problem.
I think my USB port from my phone is broken.
I will try to reset my binary counter with Triangleaway, then flash back original firmware without root and then send it for repair to the Vodafone shop!
Hope this works
Makrilli said:
You could use mobile odin, also if you flash back to ics you can reset counter with triangleaway and then flash back to gb
Sent from my sgs2 running cm9 using xda app
Click to expand...
Click to collapse
This was the right solution, thanks man!
I have the same problem. I came from CM9 and now I cannot connect my phone to the PC. I am using CheckRom V6.
Do you think it has to do with the bootloader? Or might the usb port be broken as well?
Schindler33 said:
I have the same problem. I came from CM9 and now I cannot connect my phone to the PC. I am using CheckRom V6.
Do you think it has to do with the bootloader? Or might the usb port be broken as well?
Click to expand...
Click to collapse
Yeah I think that it has to do with the bootloader, but a broken usb port is also a common problem.
I still have warranty so I will just let Vodafone repair it.
If my pc still doesn't recognize it after that, then I'm screwed.
Gepstra said:
Yeah I think that it has to do with the bootloader, but a broken usb port is also a common problem.
I still have warranty so I will just let Vodafone repair it.
If my pc still doesn't recognize it after that, then I'm screwed.
Click to expand...
Click to collapse
Ok but if it is a bootloader problem, we should not be the only ones having that problem.
I do not think I can send my phone to repair, since I am abroad for another few months.
Schindler33 said:
Ok but if it is a bootloader problem, we should not be the only ones having that problem.
I do not think I can send my phone to repair, since I am abroad for another few months.
Click to expand...
Click to collapse
Correct, I have searched the whole internet and there are some others with the same problem with the bootloader, but they can connect their phone and install the drivers I guess. I have tried everything regarding new drivers and such so I reckon that my usb port is broken.
Gepstra said:
Correct, I have searched the whole internet and there are some others with the same problem with the bootloader, but they can connect their phone and install the drivers I guess. I have tried everything regarding new drivers and such so I reckon that my usb port is broken.
Click to expand...
Click to collapse
Ok. So i think mine is broken aswell. I tried everything with the drivers, but my pc just says: USB device not recognized. Have you tried cleaning the port?
Schindler33 said:
Ok. So i think mine is broken aswell. I tried everything with the drivers, but my pc just says: USB device not recognized. Have you tried cleaning the port?
Click to expand...
Click to collapse
No I haven't tried cleaning it, do you know how to do that?
And yes my pc says exactly the same.
Hi guys,
need a hand here, yesterday I plugged my S2 to my PC but it wouldn't show up. I've done this many times before. I was getting the message saying 'usb device not recognized'. I then flashed the new ICS resurrection rom by moving it to my SD Card through an adapter. I thought maybe the usb problem would go away.
As my luck would have it the flash went badly it seems because i'm now getting the kernel panic message on my device. I can't get it to recovery mode but I can get it to download mode BUT Pc doesn't recognize the device still...
Could this maybe be a damaged port on my device?
Is it maybe a driver problem?
Any help would be much appreciated....
Anyone have any advice?
pdscoelho said:
Is it maybe a driver problem?
Click to expand...
Click to collapse
Did you install the usb drivers that are included in kies? They're in the kies\usb driver directory.
peachpuff said:
Did you install the usb drivers that are included in kies? They're in the kies\usb driver directory.
Click to expand...
Click to collapse
I plugged in a galaxy TAB and used KIES through my web browser to transfer items to the TAB. Does this interfere with the SGSII? I haven't used KIES with the SII
Instructions are to install Kies and connect the phone with the Samsung cable and drivers are found .It does not mention install another device and it will work so its a guess as to driver conflict due to Kies looking for the TAB .
Could be port on PC not a mainboard port USB on phone dirty or custom rom buggered phone .
I would flash stock GB rom via Odin .
jje
JJEgan said:
Instructions are to install Kies and connect the phone with the Samsung cable and drivers are found .It does not mention install another device and it will work so its a guess as to driver conflict due to Kies looking for the TAB .
Could be port on PC not a mainboard port USB on phone dirty or custom rom buggered phone .
I would flash stock GB rom via Odin .
jje
Click to expand...
Click to collapse
I can only get my phone into download mode, when I connect and open up odin it isn't picking up the device.....so how can I flash anything to it?
Hi
never had that problem :|......Try instal CWM whit ROm manager(market) and u can go in Recovery Mode
OP, try this.
Ekibyo22 said:
never had that problem :|......Try instal CWM whit ROm manager(market) and u can go in Recovery Mode
Click to expand...
Click to collapse
I can't get the s2 into anything except download mode....I tried flashing a new rom to see if the usb problem would go away but something went wrong with the flash. I get the kernel panic error message. So no way of installing recovery or anything else...I have to fix it through odin but not getting it to see my device....
pdscoelho said:
I can't get the s2 into anything except download mode....I tried flashing a new rom to see if the usb problem would go away but something went wrong with the flash. I get the kernel panic error message. So no way of installing recovery or anything else...I have to fix it through odin but not getting it to see my device....
Click to expand...
Click to collapse
Sorry, missed that you can't get to anything BUT download mode.
Try flashing an older Gingerbread firmware wipe package then.
EDIT: specifically using mobile Odin, since your computer isn't detecting your phone via USB... not even sure if that works, but what do you have to lose at this point?
ctomgee said:
Sorry, missed that you can't get to anything BUT download mode.
Try flashing an older Gingerbread firmware wipe package then.
EDIT: specifically using mobile Odin, since your computer isn't detecting your phone via USB... not even sure if that works, but what do you have to lose at this point?
Click to expand...
Click to collapse
Never heard of mobile Odin, but i've found it on the market. How can I get this to my device? it doesn't load up anything except the kernel panic message or download mode with the key combo.....
pdscoelho said:
Never heard of mobile Odin, but i've found it on the market. How can I get this to my device? it doesn't load up anything except the kernel panic message or download mode with the key combo.....
Click to expand...
Click to collapse
Download the apk to your computer, and email it to yourself? Or via wifi file copy?
EDIT: I'm a dork, right, your phone doesn't boot. Um... I'm not sure now... have to think about it.
I'm going to have to get a new usb port in my S2, I just hope it works after that. Found a few guys that can do it for about $40-$60. LI'll let everyone know how it goes....
pdscoelho said:
I'm going to have to get a new usb port in my S2, I just hope it works after that. Found a few guys that can do it for about $40-$60. LI'll let everyone know how it goes....
Click to expand...
Click to collapse
Good luck, dude.
I resolved the problem! Thanks for the input guys
Ok ,so heres my problem:
My S3 (i9300) wont connect to my computer which is running windows 7. I plug it in, and there is no sound for a device connected, no confirmation, and all the gs3 does is charge. it doesnt even show the little usb symbol at the top on the status bar. i've also tried two different cables, two computers, and ive cleaned the usb port on the phone.
This is all pretty recent as well. it used to connect fine on stock and the same on cm9, but one day when i plugged it in, it said unrecognized device, and from then on, the computer doesnt even know its connected anymore. i restored back to my original stock backup that had worked fine before, but still no progress. Kies has been uninstalled and reinstalled multiple times and so have the drivers for samsung phones..
Download, extract and install, then try again
Sent from my GT-I9300 using xda premium
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
http://db.tt/TSzlg0lI
Sent from my GT-I9300 using xda premium
Nope, no luck
Sent from my GT-I9300 using xda app-developers app
Does anyone else have any input or ideas? I'd really like to solve this...
Sent from my GT-I9300 using xda app-developers app
SPLucas26 said:
Does anyone else have any input or ideas? I'd really like to solve this...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
going to be a driver issue if it charges, install KIES first as that provides the necessary samsung drivers too. If this doesnt work then uninstall the USB controller you phone is connected to, unplug the phone and reboot. Leave the phone out and install KIES again.The try again.
Could be your cable too though, have you swap tested anything yet, does a different cable work or does the cable work ok in another PC?
da.trute said:
going to be a driver issue if it charges, install KIES first as that provides the necessary samsung drivers too. If this doesnt work then uninstall the USB controller you phone is connected to, unplug the phone and reboot. Leave the phone out and install KIES again.The try again.
Could be your cable too though, have you swap tested anything yet, does a different cable work or does the cable work ok in another PC?
Click to expand...
Click to collapse
I'm reinstalling KIES right now and ill try it with two different usb cables. If neither work, then ill try uninstalling the usb controller as you said and then go through the process once more. ill get back to you on it all when I'm done.
I have a few no-brand, cheap microUSB cables that allow only for charging the phones: they don't let me get a data connection between the phone (or whatever) and the PC.
Other USB cables work ok, so I know the problem is not with the phone.
You don't need (and shouldn't) install KIES only because of the drivers.
The only drivers you should install from the only trusted source are these:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
I had the same problem.
I tried EVERYTHING. I did tons of research and tried them all, nothing worked.
I fixed my problem by sending my phone in and getting it fixed. I think they replaced the hardware.
Your phone is likely having a hardware issue, get it sent in, this is the only way.
Simonetti2011 said:
I have a few no-brand, cheap microUSB cables that allow only for charging the phones: they don't let me get a data connection between the phone (or whatever) and the PC.
Other USB cables work ok, so I know the problem is not with the phone.
You don't need (and shouldn't) install KIES only because of the drivers.
The only drivers you should install from the only trusted source are these:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Click to expand...
Click to collapse
since this option is really quick to try, ill do that right now.
As for the cable I'm using, the one that I've been trying the most is the one that would work before i started having these issues. The other cable that i have is the one that came with my phone.
leeznon said:
I had the same problem.
I tried EVERYTHING. I did tons of research and tried them all, nothing worked.
I fixed my problem by sending my phone in and getting it fixed. I think they replaced the hardware.
Your phone is likely having a hardware issue, get it sent in, this is the only way.
Click to expand...
Click to collapse
The only problems with that are: 1) My phone is rooted and 2) That might take a while... what im bascially trying to do now is get it to work with my pc so that i have the possibility of unrooting and putting my music on it directly through the cable, rather than removing my microsd and having to put that into an sd adapter.
I'm having the same issue with my AT&T version. I have CM10 installed. I flash back to stock via Odin and I can get it to work, but as soon as I flash back to CM10 after rooting it won't connect.
mmurphmsu said:
I'm having the same issue with my AT&T version. I have CM10 installed. I flash back to stock via Odin and I can get it to work, but as soon as I flash back to CM10 after rooting it won't connect.
Click to expand...
Click to collapse
Did you flash back to the stock that the phone came with? I'm currently on a nandroid backup of my stock software that's rooted and I know as a fact did work at one point in time, but for some reason just refuses to connect to my pc.
SPLucas26 said:
Did you flash back to the stock that the phone came with? I'm currently on a nandroid backup of my stock software that's rooted and I know as a fact did work at one point in time, but for some reason just refuses to connect to my pc.
Click to expand...
Click to collapse
No I am flashing to a stock rooted touchwiz and I can connect to my phone when its done. When it reboots it goes into a loop so I have to reboot it and wipe data/factory reset, then reboot. When it comes back on it still won't connect, so then I reflash stock root again using Odin and it comes back with USB connection working. I think some files are getting corrupt on the phone when flashing to CM10.
I had the same problem before, I used a different charger and it worked.. idk what it was
Well right now I am on Stock TW that is rooted and I can get into my phone via Windows Explorer. But if I was to put Clock work Mod back on it seems to not want to connect anymore. So it seems CWM is doing something weird.
I'm gonna install TWRP instead of CWM and see if that makes a difference.
mmurphmsu said:
No I am flashing to a stock rooted touchwiz and I can connect to my phone when its done. When it reboots it goes into a loop so I have to reboot it and wipe data/factory reset, then reboot. When it comes back on it still won't connect, so then I reflash stock root again using Odin and it comes back with USB connection working. I think some files are getting corrupt on the phone when flashing to CM10.
Click to expand...
Click to collapse
I think that this could be what's happening. When I restore to my rooted touchwiz, all I do is restore and that's it. Could you explain exactly what you do to get it working again? I'm a bit of a noob so I just need it explained a little simpler.
SPLucas26 said:
I think that this could be what's happening. When I restore to my rooted touchwiz, all I do is restore and that's it. Could you explain exactly what you do to get it working again? I'm a bit of a noob so I just need it explained a little simpler.
Click to expand...
Click to collapse
Look for the rooted image for your phone for stock. Put your phone in download mode and use Odin to reflash it back to stock not a restore. Use this site for help: http://galaxys3root.com/category/galaxy-s3-unroot/
Its worked for me every time. You may have to flash it twice with Odin to get it to work, that's what I usually have to do.
mmurphmsu said:
Look for the rooted image for your phone for stock. Put your phone in download mode and use Odin to reflash it back to stock not a restore. Use this site for help: http://galaxys3root.com/category/galaxy-s3-unroot/
Its worked for me every time. You may have to flash it twice with Odin to get it to work, that's what I usually have to do.
Click to expand...
Click to collapse
My issue ended up being an app I had installed, Triangle Away. I uninstalled and rebooted and had my USB connection back.
Well, so far, all I've gotten it a "usb cable connected" notification when trying yet another cable. Although i got this notfication, i still couldnt see any of the files on it from my pc, so it basically wasn't really connected. Im not sure what to do from here.
My ultimate goal would be to be able to unroot it so that if i needed to send it in or whatever, then i could without worry. As a side question, is there anyway to unroot it without a pc?
how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app
I have an unrooted Samsung S3, i just received yesterday the notification of the jelly bean 4.3 update (originally ran on 4.1.2) so i went for it OTA via wifi, long story short, after download was finished and the phone automatically rebooted itself, it got stuck on samsung logo, i have waited for hours beside it (since i have modest experience about this) and finally nothing happened, so i started researching the issue, i have tried wipe data/factory resetting (didn't work) along with wipe cache partition, and no use, i have tried kies emergency firmware upgrade and initialization, but it can't see the phone in Download mode, i tried flashing the phone with Odin307 but it also cannot see my phone in Download mode, and i have heard that if the phones usb debugging was active, the phone would be seen, but i never used it, my phone was stock all the way, please help me get my phone working again.
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
andrewwright said:
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
Click to expand...
Click to collapse
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
herculese911 said:
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
Click to expand...
Click to collapse
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Brownpanda said:
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Click to expand...
Click to collapse
before the update, the charging port worked just fine, the phone was recognized in windows in device manager, and inside KIES, now both of them can't see it, so how could it be faulty?
and for the record guys, i'm not lazy, i never post a thread until i have exhausted all other researching methods
boomboomer said:
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
no its not, showing GT-I9300
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Try ODIN v1.85. It always worked fine for me, other versions don't.
Here is a compatibility list for what is worth it.
Brownpanda said:
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
Click to expand...
Click to collapse
Can you get into recovery still??
boomboomer said:
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
herculese911 said:
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
Click to expand...
Click to collapse
Thanks for sharing your experience
Hey, i have the same issue.
Can you please link me to the recovery from external sd??
Thanks.
Shahar.