How to turn to 3g/hsda only, no edge on ICS 4.0.3 - Vibrant Q&A, Help & Troubleshooting

At first, I used 2.3 honey comp ROM for my vibrant. I had an option that use HSDA/3g only, then the icon never turned to E, only 3g and H appears.
A few days ago, I updated my vibrant to 4.0.3, I couldn't find the previous option any where, and the icon keep changing between E/3g/H.
In addition, when i use rom 2.3 and turn on Mobile Ap: It worked great like a charm.
When I changed to 4.0.3, the speed of mobile AP is really slow and not stable.
Any helps are appriciated.

kalentjne said:
At first, I used 2.3 honey comp ROM for my vibrant. I had an option that use HSDA/3g only, then the icon never turned to E, only 3g and H appears.
A few days ago, I updated my vibrant to 4.0.3, I couldn't find the previous option any where, and the icon keep changing between E/3g/H.
In addition, when i use rom 2.3 and turn on Mobile Ap: It worked great like a charm.
When I changed to 4.0.3, the speed of mobile AP is really slow and not stable.
Any helps are appriciated.
Click to expand...
Click to collapse
Seems to me that when you switched the roms the modems changed ( as usually happens). Did you notice what is your new modem under baseband. If you remember the baseband version which you used on your 2.3 honey, you could flash it here and it might solve your data problem.
usually different modems have different sensitivity to the different signal strengths. in case of a weaker signal strength a particular modem might switch from 3g whereas a different modem might stick to 3g at a lower signal strength too.

kunalbhuta said:
Seems to me that when you switched the roms the modems changed ( as usually happens). Did you notice what is your new modem under baseband. If you remember the baseband version which you used on your 2.3 honey, you could flash it here and it might solve your data problem.
usually different modems have different sensitivity to the different signal strengths. in case of a weaker signal strength a particular modem might switch from 3g whereas a different modem might stick to 3g at a lower signal strength too.
Click to expand...
Click to collapse
i did a research and learn that ICS 4.0 does not allow the user to swich WCDMA only.
Is it ok if If install modem kernel of a 2.3 ROM into a 4.0.3 Rom. IF so, How can I do it? please give me the tutorial link!

kalentjne said:
i did a research and learn that ICS 4.0 does not allow the user to swich WCDMA only.
Is it ok if If install modem kernel of a 2.3 ROM into a 4.0.3 Rom. IF so, How can I do it? please give me the tutorial link!
Click to expand...
Click to collapse
I don't know which is your current rom...i'm on miui v4 right now and if i go in Settings>More>Mobile networks>Network type selection i can switch between 3G and 2G...so i can choose only 3G network.Regarding the modems,if you're an ICS rom you can flash only ICS modems...here is the link http://bit.ly/GFMk0R

My current ROM is Euphoria r.c2.

nope might not work
kalentjne said:
i did a research and learn that ICS 4.0 does not allow the user to swich WCDMA only.
Is it ok if If install modem kernel of a 2.3 ROM into a 4.0.3 Rom. IF so, How can I do it? please give me the tutorial link!
Click to expand...
Click to collapse
I have not tried that. In the link below you will find the modems which are ics compatible.
http://forum.xda-developers.com/showthread.php?t=1158783&highlight=bootloaders
All you have to do is download your choice of modem ( depending on your location) and put it on your SD card. For convenience sake put it in the phone sd card directly and not in any folder. then
1) reboot into recovery
2) select install zip from sdcard/ internal sdcard
3) choose zip file of the modem
4) yes
let it do its thing. Then reboot and check in the settings under baseband.
PS: since the rom that you are using now does not give you the option to select 3g only, even the new modem will switch to E in areas of very weak 3g reception. Just FYI.

kunalbhuta said:
I have not tried that. In the link below you will find the modems which are ics compatible.
http://forum.xda-developers.com/showthread.php?t=1158783&highlight=bootloaders
All you have to do is download your choice of modem ( depending on your location) and put it on your SD card. For convenience sake put it in the phone sd card directly and not in any folder. then
1) reboot into recovery
2) select install zip from sdcard/ internal sdcard
3) choose zip file of the modem
4) yes
let it do its thing. Then reboot and check in the settings under baseband.
PS: since the rom that you are using now does not give you the option to select 3g only, even the new modem will switch to E in areas of very weak 3g reception. Just FYI.
Click to expand...
Click to collapse
what im looking for is the option "Network Preference" on 2.2 and 2.3, on any ICS Rom, it disappears then. I downloaded an app from market called 3g only but it is not strong enough, the gsm still change to E icon.
Anymore way to get WCDMA only?

kalentjne said:
what im looking for is the option "Network Preference" on 2.2 and 2.3, on any ICS Rom, it disappears then. I downloaded an app from market called 3g only but it is not strong enough, the gsm still change to E icon.
Anymore way to get WCDMA only?
Click to expand...
Click to collapse
In that case you can try miui 4 as mikka06 suggested above.

1. open dialer
2. dial *#*#4636#*#*
3. click phone info
4. scroll down
5. change preference
6. you're welcome

kunalbhuta said:
In that case you can try miui 4 as mikka06 suggested above.
Click to expand...
Click to collapse
It's laggy.
I flashed back to 2.3 cyanogen mod 7.2 already. Now enjoy the WCDMA only zzz,
But i'm still looking for an ICS rom that has that suck option.

xtone said:
1. open dialer
2. dial *#*#4636#*#*
3. click phone info
4. scroll down
5. change preference
6. you're welcome
Click to expand...
Click to collapse
This secret code does does does not work on ICS ROm, man.

are you sure? works fine on mine.
Sent from my SGH-T959 using XDA

Sorry I forgot to scroll down xD.
But ICS still has bug with wifi AP and consumes battery with rocket-fire speed.

I dunno what you're doing but my tethers work fine, both wireless and USB. lol
Sent from my SGH-T959 using XDA

kalentjne said:
It's laggy.
I flashed back to 2.3 cyanogen mod 7.2 already. Now enjoy the WCDMA only zzz,
But i'm still looking for an ICS rom that has that suck option.
Click to expand...
Click to collapse
Why is laggy or which are your issues? I'm on miui v4 for one week and believe me is not laggy at all
Sent from my SGH-T959 using XDA

mikka06 said:
Why is laggy or which are your issues? I'm on miui v4 for one week and believe me is not laggy at all
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
I just dont like to use MIUI 4. I flashed it for 30 mins and then kicked it out of my phone. Cyanogenmod 7 brings me a smoother UI and long battery life.
Just wait a few week for the ICS Rom bugs fixed and then i'll try. I'd love to use ICS, it has such an really amazing UI.

kalentjne said:
It's laggy.
I flashed back to 2.3 cyanogen mod 7.2 already. Now enjoy the WCDMA only zzz,
But i'm still looking for an ICS rom that has that suck option.
Click to expand...
Click to collapse
One more suggestion.
If you install Doc's Master ICS v5, in that there is an inbuilt app called as galaxy S settings in the app drawer, wherein under radio you can select HSPDA only (3g only). Although I am not quite sure if it works because i don't have 3G on my plan. However the ICS rom works great otherwise and probably might solve your AP issue too. (Fingers crossed)

Great Tip
Thanks a lot, i was going mad with the phone keep going back to 2g.

Apparently, someone had an app to do the switching, but I couldn't download it because the attachment is gone or something.
http://forum.cyanogenmod.com/topic/19319-hspa-only/#entry166612

Related

S5830L Noob questions.

Hello, im new here and new at android devices.
I have a S5830L from Personal(ARGENTINA).
The first time i upgraded to 2.3.4 i lost my 3g capabilities. Later, trying others files i finally recover my 3g.
My current setup is: PDA: KP7 PHONE:KP7 CSC:KP7.
Im interested in trying CyanogenAce or CyanogenMod7. I will have the same 4g problems? Its recommended to try the Betas or i must wait to some final version?
Thanks
Lost 3g capabilities LOL? ur kidding me xD, anyway
if you wanna install Cyano Ace Flash to KPB 2.3.3 http://hotfile.com/dl/116307445/a37322f/S5830XXKPB.rar.html
After that install ClockWorkMod which is here http://forum.xda-developers.com/showthread.php?t=1168417
Copy it to the sd root , reboot phone get into recovery mode by pressing Home + Power Button Update from zip and select Clockworkmod
Download the RC2 Cyano Ace zip and the RC 2.1 update , into the sd card make 2 folder called ¨Update¨ and ¨Cyano¨, copy the RC2 Installer into Cyano, Copy the RC 2.1 update into Update Folder.
After doing that reboot phone again, get into recovery mode the clockworkmod will appear , go to the install from zip menu and select the Cyano Folder and install the rc2, after that is done, select again install from zip and select the rc 2.1 update in the update folder, reboot and happy cyano, u need to wait a little to boot because it takes a lil to boot at first time.
Remember to add your Apn settings to have 3g...
You are right - when I was using russian 2.3.4 there was 3G bug and it doesnt work to...
I am testing CyanoAce for a two days and everything is working normaly for this time... Its good to make bigger sd-ext while preparing sd card and move dalvik cache to it... look at my gallery there are some pics of benchmarks testing cyanoace
And its good to make a battery formating in cwm after instaling this rom... ( perhaps batery must be at 100 % before this! )
Its faster than 2.3.4
Sent from my GT-S5830 using XDA App
kurama72 said:
Remember to add your Apn settings to have 3g...
Click to expand...
Click to collapse
Can you explain this to me?
Thanks.
I recommend using the following app available in the Market
APN Backup & Restore
Backup your APN before flashing a custom rom when everything's working. Tell me how it goes.
AlterJack said:
I recommend using the following app available in the Market
Backup your APN before flashing a custom rom when everything's working. Tell me how it goes.
Click to expand...
Click to collapse
Thanks man.
quick question: whar re the primary differences in cyanogenmod7 and cyanoace?
bubamacko said:
Thanks man.
quick question: whar re the primary differences in cyanogenmod7 and cyanoace?
Click to expand...
Click to collapse
Well, as far as I know (and feel free to correct me if I'm wrong), CyanoAce (I guess you're referring to BehradGH and Grif07's versions) and CyanogenMod7 differ one from another on some parts of the ROM as kernel and such; but they're supposed to be the same if not an exact copy of an original version of CM7. Did that helped you?
AlterJack said:
Well, as far as I know (and feel free to correct me if I'm wrong), CyanoAce (I guess you're referring to BehradGH and Grif07's versions) and CyanogenMod7 differ one from another on some parts of the ROM as kernel and such; but they're supposed to be the same if not an exact copy of an original version of CM7. Did that helped you?
Click to expand...
Click to collapse
Cool man, thanks.
The main issue im having is the battery duration, this will help ?
You and everybody else. That depends on your usage, your 3G network strength signal and your availability to connect to WiFi every time it's possible since WiFi wastes less battery than 3G/2G.
I will try that then. My phone is rooted, this will change anything when flashing to cyanoace?
I wrote it before - do you wipe battery setings in cwm after porting cyanoace rom? Its better to fo it... but battery must be at this moment on 100% level... Than it maebe will keep a longer time using your device...
Sent from my GT-S5830 using XDA App
I suggest reading a little bit the stickies on the General and Development forums. You'll find a lot of info to help you.
Sent from my GT-S5830 using XDA App
Hi, I also have the Galaxy ACE S-5830L and want to install CyanogenMod 7.1 2.3.7 RC 2.2; now I understand than I need to flash with KPB firmware, but the 3G network will work good after installing CyanogenMod? if not, can I use the modem from KP7 with CyanogenMod?
I'm from Bolivia, my Carrier is TIGO.
Thanks in advance.
As far as I know, based on my experience, you can flash any ROM you get your sweet hands on, the signal will work, the 3g depends, you can dial *#2263# and select the frequency your carrier uses, but if that doesn't work you must flash (via odin) the unbranded modem for Latinamerica.
Tanks for the answer, I'm starting to download all the stuff needed to flash my phone.
Sent from my GT-S5830L using XDA App
EDIT:
Now with CyanogenMod 7.1 RC2.2 working very well on my Ace, not needed to flash KPB, with my original modem firmware it works with 3G Network.

My phone can't find any wireless network?

Since I installed Cyanogen ROM 7.1, my 5500 can't find any wireless network.None of them are listed on my phone!?(like there's no wireless signal around). Tried with different fixes, different ROM-s.. When I was on stock ROM everything was OK.When I go to settings-turn on wireless it says 'Activity Wi-Fi settings (in application settings) is not responding'. and have force close and wait choice.Also in advanced settings says MAC and IP address Unavailable. Any suggestion? Thanks!
What Baseband are you using?
Go to Settings > About Phone and go to the 'Baseband Version' section.
Try finding your baseband on this website, and see if it is recommended for Cyanogenmod:
http://www.madteam.co/forum/development/basebands/
If it is not there or is considered BAD, then download an OK one from your region. (Being from Europe, I am using the I5500NEJP2, which just so happens to be from my own Irish network provider)
I've just changed it from I5500LUYJPE to I5500NEJP2 and still nothing!
Still can't see any wireless signal around..
Try reflashing, or going back to stock just to see if the wifi still actually works
Sent from my GT-I5500 using Tapatalk
Can you help me with the 'back to stock' link? Should I do it with Odin..?
Yeah, flash the file with odin. There's 2 files you hace to flash, but I can't remember where the other one is
Sent from my GT-I5500 using Tapatalk
There's wireless when i'm on stock rom?!
This is crazy
what version of cyanogen were you using?
CyanogenMod - 7.1.0-MADTEAM
kernel version2.6.32.9
Last thing on my mind is to change kernel..maybe..
big thanks for help!
dvla said:
CyanogenMod - 7.1.0-MADTEAM
kernel version2.6.32.9
Last thing on my mind is to change kernel..maybe..
big thanks for help!
Click to expand...
Click to collapse
I'm running the same kernel and everything is ok for me.
All I can tell you is to reinstall Cyanogenmod and the hotfix again. But be sure to do a data wipe first, and clear your dalvik cache by going into 'Advanced'. Then install the rom.
dvla said:
CyanogenMod - 7.1.0-MADTEAM
kernel version2.6.32.9
Last thing on my mind is to change kernel..maybe..
big thanks for help!
Click to expand...
Click to collapse
a have the same cm kernel and galaxy5.. also same prob. is this issue fixed? how?? thanks!

no 2g after flashing adfad666's cm 7.2 with telus p500

im guessing i cant get 2g because telus's 2g was cdma? im on the old .32 baseband and flashed that version of cm7. does anyone know where i can get just the radio or baseband for telus to flash over this rom?
this is my pay and go phone so i dont need 3g data and 2g gives me better reception and battery life so i want to be able to leave my optimus on 2g all the time.
EDIT: i just tried flashing P500-v10E-baseband.7z from this thread and have the same results
u had to change the rom, not the baseband....
ccdreadcc said:
u had to change the rom, not the baseband....
Click to expand...
Click to collapse
From what I gathered in the abandoned thread for AdFad666's rom, future builds may only exclusively support the new baseband.
Of course, I could be wrong, since it seems like the A-series and F-series are still being updated.
In any case:
neotekz said:
i just tried flashing P500-v10E-baseband.7z from this thread and have the same results
Click to expand...
Click to collapse
OP, did you confirm that you're on the correct baseband?
You can either throw the phone back on LGMDP (it'll display a version in the window) or hop down to a rom that has the LG hidden menu.
Also, what happened to the backup that was made when you flashed to v20G?

[Q] How to enable AMR-WB on ICS?

Does anyone know how to enable AMR-WB on Stock ICS Firmware (LPQ)? In Gingerbread it was possible to change the status in the service menu *#*#197328640#*#* -> 5 (Audio) -> 7 (AMR-WB). On ICS it is just possible to see the that it is OFF but I can't change ist to ON.
I've got essentially the same problem.
I'm entering the service number, and getting the menu, but when I press on 5 for Audio, the screen appears to refresh but not change, and when I got to WB-AMR status everything is OFF.
I have a workmate with the same ROM on his phone (We're both using the stock XEU ROM, unrooted for the time being), and his settings are all turned ON.
He's unable to change his status to OFF though.
The key factor appears to be that my WB-AMR was most likely OFF before I upgraded and his was definitely ON before the upgrade.
Any idea what can be done to get it turned on?
I've got the same problem on mine. Doesn't matter which ICS rom I try using. Anyone got a workaround or a solution? This is really frustrating!
Don't know if this will help anyone, but VK rom lets me turn AMR WB on, and it works!
http://forum.xda-developers.com/showthread.php?t=1559009
First ICS rom I've tried that has this working, so I guess I'll be sticking with it.
Edit: After flashing a new modem I can no longer enable AMR WB. If I flash Gingerbread then restore any ICS backup however, I can access the AMR WB setting. Weird.
p3anut said:
Don't know if this will help anyone, but VK rom lets me turn AMR WB on, and it works!
http://forum.xda-developers.com/showthread.php?t=1559009
First ICS rom I've tried that has this working, so I guess I'll be sticking with it.
Edit: After flashing a new modem I can no longer enable AMR WB. If I flash Gingerbread then restore any ICS backup however, I can access the AMR WB setting. Weird.
Click to expand...
Click to collapse
What was your previous modem? KI3? Doesn't work on LPX
KL1 according to the phone. You have to flash a GB rom first (I used checkrom from memory), set AMR to enabled, wipe, then flash an ICS rom.
p3anut said:
KL1 according to the phone. You have to flash a GB rom first (I used checkrom from memory), set AMR to enabled, wipe, then flash an ICS rom.
Click to expand...
Click to collapse
I'm wondering if it does some sort of auto detect in ICS now? I know Telstra support AMR.
I hadn't seen it work until the other day when I flashed Checkrom (GB), so I'm pretty sure it has something to do with that. I had no issues before the last few ICS releases with Telstra's HD Voice. Either way, it's pretty annoying. I wonder if Telstra's ICS rom works with it? They advertise the phone as having HD voice, so you'd hope so.
As far as I'm aware it should be this ROM Telstra rolled out for ICS ->
I9100TDVLP4/I9100TTELLP2/I9100TDVLP3/I9100TDVLP4
meno69 said:
As far as I'm aware it should be this ROM Telstra rolled out for ICS ->
I9100TDVLP4/I9100TTELLP2/I9100TDVLP3/I9100TDVLP4
Click to expand...
Click to collapse
Has anyone tried these to see if AMR WB works?
p3anut said:
Has anyone tried these to see if AMR WB works?
Click to expand...
Click to collapse
I'm not on the Telstra network right now and I can't find a rooted copy of this rom to try. I'm wondering if just have the modem and CSC would work...
I'd tried a few Telstra modems without any luck, regardless of rom (apart from the Telstra ones). The only way I've got the audio menu to work is flashing a GB rom first, then going to an ICS one.
p3anut said:
I'd tried a few Telstra modems without any luck, regardless of rom (apart from the Telstra ones). The only way I've got the audio menu to work is flashing a GB rom first, then going to an ICS one.
Click to expand...
Click to collapse
I just tried XXLPB and it appears to let me enable wb-amr - haven't been able to test it works though by calling another phone with it enabled.
It was strange because I tried the LD3 modem that came with stock Bell Canada firmware it had a slightly different service menu but wouldn't let me enable it. So I look at other countries with WB-AMR enabled carriers and tried Orange's latest modem.
http://dl.dropbox.com/u/24125120/radio-cm-9-SGS2-LPB-signed.zip
meno69 said:
I just tried XXLPB and it appears to let me enable wb-amr - haven't been able to test it works though by calling another phone with it enabled.
It was strange because I tried the LD3 modem that came with stock Bell Canada firmware it had a slightly different service menu but wouldn't let me enable it. So I look at other countries with WB-AMR enabled carriers and tried Orange's latest modem.
http://dl.dropbox.com/u/24125120/radio-cm-9-SGS2-LPB-signed.zip
Click to expand...
Click to collapse
It's weird, I flashed the latest CM9 yesterday and am running the LPX modem, lo and behold WBAMR is on and working. No idea what changed it, but it's on when I check in the service menu and I can definitely hear that it's on when I call my partner. I still can't press audio in the service menu to change it though.
p3anut said:
It's weird, I flashed the latest CM9 yesterday and am running the LPX modem, lo and behold WBAMR is on and working. No idea what changed it, but it's on when I check in the service menu and I can definitely hear that it's on when I call my partner. I still can't press audio in the service menu to change it though.
Click to expand...
Click to collapse
I've never got service mode to work with CM9? How did you get to it?
It could have something to do with this commit? https://github.com/CyanogenMod/andr...mmit/ae1cbf3a6be031aacc33f1f8f090b9e5e53e27ed
FYI: On WanamLite with LPB I can edit it and change the value.
meno69 said:
I've never got service mode to work with CM9? How did you get to it?
It could have something to do with this commit? https://github.com/CyanogenMod/andr...mmit/ae1cbf3a6be031aacc33f1f8f090b9e5e53e27ed
FYI: On WanamLite with LPB I can edit it and change the value.
Click to expand...
Click to collapse
Works fine with the normal keys, does yours show as on?
That commit does look like it should have sorted it though.

problem with internet what should i do ?

i had the LPJ karnel with the Resurrection V1.0 remix ics
then i have decided to update the ROM to Resurrection V2.6 remix ics
and also installd the CM9 Karnal whit the ROM (tried to install it with siyha to)
and evry thing works perfect exept that the internet (3g) does not work only the WI-FI works
please help
Are your internet connection settings correctly set?
System settings / wireless... / more / mobile... / APN?
Sent from my GT-I9100 using Tapatalk 2
yea, the internet connection setting is just the same as they were before...
i think that what heppend is that when i changed the ROM a new modem file was installed and maybe it doesnt fit
but i dont realy know and i have never installed or touched moddem files...
See that helpful chap geko95gek,he knows all about modems.
Sent from my GT-I9100
chiko2490 said:
yea, the internet connection setting is just the same as they were before...
i think that what heppend is that when i changed the ROM a new modem file was installed and maybe it doesnt fit
but i dont realy know and i have never installed or touched moddem files...
Click to expand...
Click to collapse
flashing a modem thro CWM recovery in no way harm ur phone, so please try a cpl of modem and see the one that wrks well for u.
u can even try the one that was there earlier before flashing v2.6 rr rom and see
link for modem zip file below
Modem Collection
Modems can be flashed in recovery mode easily. Search in this forum and theres a thread dedicated to I9100 modems with lots to choose from. Each user has their own preferred modem so its down to flashing and observing any improvements in signal and data strength.
Sent from my GT-I9100 using xda app-developers app
how do i know which moddem to choose ?
and how do i install it ?
THANKS !
Read thread see if any users from your region recommend a particular modem. Or just flash a selection and use a signal strength monitor app to find best for your area. Takes a while but well worth it
Sent from my GT-I9100 using xda app-developers app
First try wipe cache also, from stock recovery
Sent from my GT-I9100 using Tapatalk 2
chiko2490 said:
how do i know which moddem to choose ?
and how do i install it ?
THANKS !
Click to expand...
Click to collapse
Did you bother reading what I posted.I knew nothing about modems for that rom until I spoke to that chap I mentioned.He'll advise you the range of modems to install and the preferred method of flashing(ie pc rather than phone).
THANKS for evry one first of all...
i have tried to flush a lot of modems used in my area and yet i see no change soo im
not sure that the modem is the problem... and im still having the same problem with the internet conection (3g)
also ive contected the that chap and im still wating for an ansawer from him ...

Categories

Resources