Related
Newest Release!
PLEASE READ THIS WHOLE POST BEFORE YOU GET 2 WORK WITH IT!!!! USE AT OWN RISK!!!!
EXEC:\Extended_ROM\Set_Button_Lock.exe
CAB: \Extended_ROM\AboutDiamond.CAB
CAB: \Extended_ROM\AltTab.cab
CAB: \Extended_ROM\Blackberry.cab
CAB: \Extended_ROM\BL_GraphiteLabel_kb_skin.cab
CAB: \Extended_ROM\Caller_ID.cab
CAB: \Extended_ROM\Camera.cab
CAB: \Extended_ROM\ClearType_Landscape.cab
CAB: \Extended_ROM\ClearType_Tuner.cab
CAB: \Extended_ROM\DiamondSettings.cab
CAB: \Extended_ROM\Explorer.cab
CAB: \Extended_ROM\GPRSMonitor_WWE.sa.CAB
CAB: \Extended_ROM\IintelliPad_TMO_WWE_B12.CAB
CAB: \Extended_ROM\IntelliDialer.cab
CAB: \Extended_ROM\IntelliDialer_Skin.cab
CAB: \Extended_ROM\IntelliPad_Skin.cab
CAB: \Extended_ROM\Midi_Ringtone.cab
CAB: \Extended_ROM\MMS_Composer.cab
CAB: \Extended_ROM\PocketPlus.arm.cab
CAB: \Extended_ROM\PVideo_MMS.cab
CAB: \Extended_ROM\RegEdit.cab
CAB: \Extended_ROM\Reset.cab
CAB: \Extended_ROM\Running_Programs.cab
CAB: \Extended_ROM\Tray_Launch.cab
CAB: \Extended_ROM\Version_BT.Handsfree.cab
CAB: \Extended_ROM\WiFi_Tools.cab
CAB: \Extended_ROM\Rotate_Screen.cab
CAB: \Extended_ROM\WLAN_SDIO_V1_Driver.CAB
Change your country id if you like: 0x20040305
http://forum.xda-developers.com/viewtopic.php?t=12101
INSTALLATION:
Please login or create an account so you can download the Attached file!
1. Download the file below.
2. Unzip it to a local folder (its a self extracting archive)
3. Put phone in BOOTMODE (Press Power,Softreset and the Round Button all at the same time. Your phone will show: Serial v1.0x put it in the cradle)
4. Run the "HimaUpgradeUt.exe"
5. Follow the instructions on the screen.
6. After upgrade you wil need to setup your phone regional settings etc.
7. Once you finished that the autoinstaller will start, you will get some messages with version differences but just tap OK.
8. And when its completed preform a SOFT Reset
9. And your done!
IMPORTANT!
RESET THE PHONE AFTER THE SETUP IS COMPLETED(THE AUTO INSTALL).
Don't restore a full backup, becouse this will overwrite the enhancements!
Example:
If you make a full back-up on version 1.0 and restore it at the 1.2 version you will end up with the 1.0 version. So keep that in mind. Contact & Appointment back-up is allowed this wont destroy anything
YOU CAN CONTACT ME WITH YAHOO MESSENGER BUT ONLY FOR SUGGESTIONS, HELPING ON THE PROJECT AND OTHER OFF TOPIC/FORUM STUFF!! REMEMBER: IM NOT A SERVICEDESK!! BEFORE YOU ASK ME SOMETHING SEARCH FORUM FIRST!!
YAHOO:
OMEGA2MAD
GOOD LUCK!!
Secure your phone check this out!
http://wiki.xda-developers.com/index.php?pagename=IIWPO
How to install *.CAB files on my phone?!!
1. Put your phone in the cradle.
2. Open Active Sync
3. Click File->Explore (A screen will pop-up and you will see the files that are on the "My Documents" directory of your phone)
4. Copy the *.CAB file and Paste it in the "My Docments" directory of your phone.
5. Take your phone out of the cradle.
6. Start Explorer on your Phone
7. Browse to the "My Documents" directory
8. Tap the *.CAB file and it will be installed.
9. Follow the directions on the screen(If you get a version error just ignore it)
Thats all!!!
TROUBLESHOOTING:
The Album Issue:
hi,
I have upgraded my pocket pc to the diamond 1.1/1.2 ROM version. but when I now try to open pictures stored on my storage card or even pictures I just made, it says "cannot find image (or one of its components). make sure the path and filename are correct and all the required libraries are available"
what can I do to solve this problem?
thx
Click to expand...
Click to collapse
Solution:
1. Start the Album program Tap: Tools->Option then tap the Associations tab.
2. Untap all checkboxes then tap OK then close Album
3. Start Album again and check the boxes and close Album
It will work now..
I hope 2 have it solved permanently in version 1.3!!
The GPRS-Disconnect Issue:
johndope said:
hey m8 how about a disconnect button for the gprs setting?
Click to expand...
Click to collapse
Solution:
To disconnect the GPRS hold down the red hang up button for 5 sec.
I hope 2 have it solved permanently in version 1.3!!
Sorry for the inconvenience..
Can you also make it for the caller id Qtek
or when you finish,point me to what to change...
thanx
sounds very good
that is where lots of mda2 users from t-mobile nl are waiting for..
hope to see it here soon.. :lol:
..
Its the first rom i build but its not 2 hard if you read the forum.
i already have it on my phone and it works quite good.
im gonna build it so its perfect but if you want you can suggest me good progs for the rom. i will post the progs already in my rom later on.
OMEGA_T-Diamond 1.0SE ROM
thx!!
LOOKING FOR THE ROM SCROLL BACK UP!!
looks good for a start!
did you think on.. powerpoint viewer, pdf viewer, microsoft reader, and word and excel... or are these allready in it?
gr roland 8)
Pocket word/excel are in it already but pdf not yet but that can be done
Finished?
Please when you are finisched.
let me know.
I'm would like to have the 2003 SE for holland.
with kind regards
Martin.
Orange variant?
Kan ik na installatie ook de operator aanpassen? Of moet dit er gelijk bij ingebakken worden?
Hoor 't graag!
:shock:
Orange
Ehm ik weet het niet zeker want het staat er niet op maar ik heb zelf ook een O2 verzie op mijn telefoon gehad en dat werkte perfect!
En mocht het nu niet werken kan je altijd weer de originele terug zetten van de Orange die ze op de site hebben staan. (Als downgrading kan dan dit is terug te vinden in het forum)
Ik hoop je genoeg geinformeert te hebben.
OMEGA_ReD
is there allready a rom for download?
hello,
i was wondering if there is all ready a rom ready for download?
gr
roland
that would be wonderfull
great
Lots of people are waiting for this !!
Can I make the caller ID Qtek?
Can I make the operator KPN?
Thanks, Peter.
Can't you make a list of features u want to put into this? and maybe a request list or something.....
Sounds very nice, i'm looking forward to this!!
Maybe some fax software like KSE fax? In win2003 it's included ( i had to buy it for my qtek2020)
I am waiting for the files to try.... can't wait
good luck...
Kan iemand even de nederlandse GPRS instellingen posten ben ze kwijt
zalk die probeere in de volgende verzie in te bouwen. dat wordt dus de verzie na degenie die hier onder staat.
I SUGGEST YOU TRY THE NEWEST VERSION! SCROLL UP!
ALSO READ THIS!
http://forum.xda-developers.com/viewtopic.php?t=12101
i'm now installing it
thanks for the download, i install it now...
just because i trust the maker..
i will send him a pm after the install..
and let you all now how it goes..
bye..
roland :wink:
IT WORKS !!!!
Hello again..
it is working..
did test a lot of functions..
the only thing that isn't work is mediaplayer... it close it selve within seconds..
but i think that can be fixed..
thanks !
splashscreen..
almost forgot..sorry..
the splashscreen looks real good..
bye
Help!
I can't extract them from any ROM.
I tried but have not succeeded.
Can some one please send me in PM/Post
TX in advance :wink:
1) Dump imgfs (all OS ROM files) from a device with italian rom:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
2)Use rdmsflsh.pl to extract the contents from imgfs:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoExtractImgfs
Hi Nicola!
You have to use Resco File Explorer (not the original File Explorer) to substitute all files I've uploaded
Remember to unhide all ROM's files from Options
....It works very well!!! :wink:
Tx Daniele
I am sure it will be useful for many Italians.
Ciao
:wink:
Here
http://htchermesitalia.forumup.it/viewtopic.php?t=10&mforum=htchermesitalia
istruction in italian lang...
German:
Ist es möglich auf der Manila Startseite einen anderen Kalender (In meinem Fall PocketInformant) zu nutzen anstelle des Kalenders von Windows Mobile?
Wenn ja: Wie mach ich das?
Danke
English:
Is it able to use another Calendar on the Manila Startpage (for me: PocketInformant) instead of the Calender from Windows Mobile?
If yes: How can i do it?
Thanks, and sorry for my not so good english
Search at XDA
google XDA and you find solution. This is for alarm, change for calendar
Originally Posted by Zepiii
How to get G-Alarm instead of default alarm?
- Install VJBrisk
- Go in Program files/Vijay555/vjbrisk
- Inside this folder, there are VJBrisk.exe, make a copy of it.
- rename this copy into clock.exe
- rename old /windows/clock.exe
- place this new copy into windows/
- Go in G-alarm folder
- create a shortcut of G-alarm.exe
- rename it in clocklnk (don't forget the lnk at the end. : clocklnk.lnk)
- Put this shortcut into /windows/
This could work for other applications ! List them !
I'm using SPB TIME and works very well.
editon't even try to rename the clock.exe inside \windows, just overwrite it.
Howdy.
Quick question: Where in the .pkg update package is the information on the build and the version of the update? I sort of screwed up my tablet, I can boot into stock recovery but not much more. ADB won't work, and AFAIK nobody knows how to enter fastboot mode on this thing. Hence, I figured that the only way to reinstall the ROM is to trick recovery into installing an update package that's already installed.
The tablet is Fujitsu STYLISTIC M532.
Cheers,
-odd
Try this possibly will help:
1. Open the encrypted firmware file in the program Hex Editor Neo
2. Mark the first 13 bytes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Operations >> Bitwise XOR
4. In the resulting window, select as shown in the picture, click OK.
5. After this step, you will see what is the version of the firmware.
6. Change to a newer version and do the step 3 again.
7. Save the file and try flash it.
Or simply to change the required bytes in any hex editor (I think from the pictures you will understand)
I apologize for my English, I hope you understand me.
Thanks, I'll try that when I get home
Holy inverse nipple batman it actually worked! You just saved me two hundred euros in repairs. I owe you big time, mate. Thanks!
Ist es möglich diese fertige Datei zum Download zu bekommen, ich bin mir nicht sicher ob ich es richtig gemacht habe, da ich immer noch kein Update machen kann und gelange immer wieder auf diesen Recovery Modus, wieso hab ich gestern das Update gemacht, was ich heute nirgendwo finden kann. Danke.
Heute hab ich es mal auf Deutsch übersetzt und bin mir nicht sicher ob es funktioniert hat:
Nach dem starten Unfortunality OTACustumisation has stopped?
Danach Costomizing, please wait ...bis jetzt steht es da, wie lange dauert es?
Madonna62 said:
Ist es möglich diese fertige Datei zum Download zu bekommen, ich bin mir nicht sicher ob ich es richtig gemacht habe, da ich immer noch kein Update machen kann und gelange immer wieder auf diesen Recovery Modus, wieso hab ich gestern das Update gemacht, was ich heute nirgendwo finden kann. Danke.
Heute hab ich es mal auf Deutsch übersetzt und bin mir nicht sicher ob es funktioniert hat:
Nach dem starten Unfortunality OTACustumisation has stopped?
Danach Costomizing, please wait ...bis jetzt steht es da, wie lange dauert es?
Click to expand...
Click to collapse
English please !
I need now the "update_cv_FFFFF.pkg" , please.
Madonna62 said:
I need now the "update_cv_FFFFF.pkg" , please.
Click to expand...
Click to collapse
This? --> http://support.ts.fujitsu.com/content/UpdateM532emea.asp?back=true&lng=COM
Beware that there are different .pkg, you need to go to Settings -> About tablet -> Build number and write here all of it, or else you can brick the tablet.
I have the CHAGALLF08705.pkg but not the update_cv_FFFFF.pkg, who can I find that? My english is not good.
Copy the file "update_cv_FFFFF.pkg" to the root directory of the MicroSD-Card.
Copy the file of the software image CHAGALLF08705 .pkg to the root directory of the MicroSD-Card.
Madonna62 said:
I have the CHAGALLF08705.pkg but not the update_cv_FFFFF.pkg, who can I find that? My english is not good.
Copy the file "update_cv_FFFFF.pkg" to the root directory of the MicroSD-Card.
Copy the file of the software image CHAGALLF08705 .pkg to the root directory of the MicroSD-Card.
Click to expand...
Click to collapse
yes, the CHAGALLF08705.pkg is the file to update the tablet. HOWEVER, YOU MUST UPDATE THE CORRECT FILE FOR THE TABLET!!!
THERE ARE 3 REGIONS OF THE GLOBE, YOU NEED TO GO TO Settings -> About tablet -> Build number AND PASTE HERE THE BUILD NUMBER!!
I cannot be responsible if you brick/damage your tablet.
it's not possible to install the CHAGALLF08705 firmware:
recovery
install ...
install sdcard
Finding update package
E: Version check not allow update
E: Cant decrypt /data/sideload/package.zip
Installation aborted.
Madonna62 said:
it's not possible to install the CHAGALLF08705 firmware:
recovery
install ...
install sdcard
Finding update package
E: Version check not allow update
E: Cant decrypt /data/sideload/package.zip
Installation aborted.
Click to expand...
Click to collapse
Have you tried the instructions from PaulMos82 in the previous page? You need to change the version in HEX from CHAGALLF08705 to CHAGALLF08805..
I think my tablet is bricked:
When I restart the tablet I have:
Unfortunately, OtaCustomization has stopped
Customizing, please wait ...
Recovery System
I have testet it but the same:
install sdcard
Finding update package
E: Version check not allow update
E: Cant decrypt /data/sideload/package.zip
Installation aborted.
I say again:
1) you need to hex edit the .pkg file (following the instructions on the 1rst post), and increasing the version number.
or...
2) I will make a .pkg file just for you. Since I could not help you to fish, here's the fish: http://rapidshare.com/files/458196214/CHAGALLF08805.pkg
good luck
Thanks, but I have the same problem:
install sdcard
Finding update package
E: Version check not allow update
E: Cant decrypt /data/sideload/package.zip
Installation aborted.
one question I have
Download the required software package via the following web link:
http://docs.ts.fujitsu.com/dl.aspx?id=a8d8bdc9-59d0-4342-9810-809b095f8882
?
but I can' download this software
1. Note: Performing the flash procedure will delete all data on the STYLISTIC M532!
2. Download the ZIP file mentioned on the previous page and extract its contents to a directory on your hard disk.
3. Download the software image of the desired SKU from http://support.ts.fujitsu.com/Download/:
6. Copy the file "update_cv_FFFFF.pkg" to the root directory of the MicroSD-Card.
7. Copy the file of the software image of the desired SKU (e.g. "CHAGALLF06005.pkg") to the root directory of the MicroSD-Card.
17. Use the Volume Up/Down keys to go to update_cv_FFFFF.pkg and the Power Button to select it.
18. After the Flash procedure you will see the Recovery menu again.
19. Now it is possible to flash the software image of the desired SKU.
I need this file update_cv_FFFFF.pkg to tested it, my last chance.
What is worksorder from Fujitsu?
try this file: --> http://forum.xda-developers.com/showpost.php?p=36191640&postcount=168
Maybe that helps -> http://forum.xda-developers.com/showpost.php?p=36593939&postcount=182
PaulMos82 said:
Try this possibly will help:
1. Open the encrypted firmware file in the program Hex Editor Neo
2. Mark the first 13 bytes.
3. Operations >> Bitwise XOR
4. In the resulting window, select as shown in the picture, click OK.
5. After this step, you will see what is the version of the firmware.
6. Change to a newer version and do the step 3 again.
7. Save the file and try flash it.
Or simply to change the required bytes in any hex editor (I think from the pictures you will understand)
I apologize for my English, I hope you understand me.
Click to expand...
Click to collapse
Hello! I'm new in this forum. I've just registered to ask for your help. Hope you can give it me and thanks in advance. I'm quite desperate now.
I think I had the same problem of the user above. I have upgraded to the newer firmware without success and the tablet only reboots in the recovery mode. I had the factory firmware installed (and I don't know which it was). Now if I try to install the new firmware I only get the "installation aborted" message after a few seconds. What should I do? Do I have to edit the new firmware such as it seems newer to the system? What number of the firmware should I enter? I'm trying to install CHAGALLF14405.pkg
EDIT: I've managed to re-install again the same pkg by editing it. The installation ends (as the first time without any error message) but android always boots into recovery mode. What should I do? Should I use an older image? I have a European model (I don't know it this information is enough).
Impatiently waiting for your reply...
mg
Installation Aborted
mrgelo said:
Hello! I'm new in this forum. I've just registered to ask for your help. Hope you can give it me and thanks in advance. I'm quite desperate now.
I think I had the same problem of the user above. I have upgraded to the newer firmware without success and the tablet only reboots in the recovery mode. I had the factory firmware installed (and I don't know which it was). Now if I try to install the new firmware I only get the "installation aborted" message after a few seconds. What should I do? Do I have to edit the new firmware such as it seems newer to the system? What number of the firmware should I enter? I'm trying to install CHAGALLF14405.pkg
EDIT: I've managed to re-install again the same pkg by editing it. The installation ends (as the first time without any error message) but android always boots into recovery mode. What should I do? Should I use an older image? I have a European model (I don't know it this information is enough).
Impatiently waiting for your reply...
mg
Click to expand...
Click to collapse
I'm getting the same "Installation Aborted" twice after Installing SDCARD. How did you get rid of it, my Firmware Version is CHAGALLFFFFFF. Does the filename has to reflect the same version as the one inputed in the Hex Editor?
choliz said:
I'm getting the same "Installation Aborted" twice after Installing SDCARD. How did you get rid of it, my Firmware Version is CHAGALLFFFFFF. Does the filename has to reflect the same version as the one inputed in the Hex Editor?
Click to expand...
Click to collapse
Maybe it has to reflect it (that was my idea): in fact I have changed the file name according to the change I've made to the firmware. I didn't get the "Installation Aborted" message but although the installation finished without any error, my devide doesn't work and loop in recovery.
So give it a try and install it again, nothing to lose....
I'm really disappointed with FS, they release some firmware that it's actually not working, and I had an unrooted machine. I'd like to have an older version of a working firmware (european version). Where can I download it? May someone share it?
I'm starting this thread by asking about direct Google TTS voices download. There are some direct links but unfortunately I'm not able to find again searching on Google, Baidu, Soso, Naver. I'm asking the direct download links because I want to download the zip files to my computer, extract them and copy them to my android device.
I was able to find the following links (these are not for Google TTS):
English (United Kingdom)
en-GB (female) -dl.google.com/dl/android/tts/v2/en-gb-x-fis-phone-hmm-r2.zvoice
en-GB (female) -dl.google.com/dl/android/tts/v2/en-gb-x-fis-diphone-usel-r2.zvoice
en-GB (male) -dl.google.com/dl/android/tts/v2/en-gb-x-rjs-phone-hmm-r2.zvoice
en-GB (male) -dl.google.com/dl/android/tts/v2/en-gb-x-rjs-diphone-usel-r2.zvoice
English (United States)
en-US (female) - dl.google.com/dl/android/tts/v2/en-us-x-sfg-phone-hmm-r2.zvoice
en-US (female) -dl.google.com/dl/android/tts/v2/en-us-x-sfg-diphone-usel-r4.zvoice
German (Standard)
de-DE (female) -dl.google.com/dl/android/tts/v2/de-de-x-nfh-phone-hmm-r2.zvoice
Portuguese (Brazil)
pt-BR (female) -.google.com/dl/android/tts/v2/pt-br-x-afs-phone-hmm-r2.zvoice
Spanish (Spain)
es-ES (female) -dl.google.com/dl/android/tts/v2/es-es-x-ana-phone-hmm-r2.zvoice
Spanish (United States)
es-US (female) -dl.google.com/dl/android/tts/v2/es-us-x-sfb-phone-hmm-r2.zvoice
French (France)
fr-FR (female) -dl.google.com/dl/android/tts/v2/fr-fr-x-vlf-phone-hmm-r2.zvoice
Italian (Italy)
it-IT (female) -dl.google.com/dl/android/tts/v2/it-it-x-kda-phone-hmm-r2.zvoice
Korean (Korea)
ko-KR (female) -dl.google.com/dl/android/tts/v2/ko-kr-x-ism-phone-hmm-r2.zvoice
Google TTS is downloading to mnt/sdcard/Android/data/com.google.android.tts/files/download_cache the .zip files (for example en-US_6.zip) that will be extracted later to data/data/com.google.android.tts/app_voices_v2.
If someone will be able to provide the direct download links or to upload the voice files from the latest Google TTS, it will be really good. Thank you
other download links but useless
dl.google.com/dl/android/tts/v3/en-gb-x-fis-phone-hmm-r4.zvoice
dl.google.com/dl/android/tts/v3/en-us-x-sfg-phone-hmm-r4.zvoice
download links...
google tts is contacting dl.google.com/dl/android/tts/v2/voices-list-r1.proto (and of course, for latest version the latest .proto file) in order to download voices. But I'm not able to decrypt this file in order to obtain the file names...
Make these links clickable.
hyperlinks
thahim said:
Make these links clickable.
Click to expand...
Click to collapse
Just put "https://" or select the link in Chrome and select "Go to.." in contextual right click menu:
https:// dl.google.com/dl/android/tts/v2/ko-kr-x-ism-phone-hmm-r2.zvoice
Because I'm new on xda-developers, I'm not able to add hyperlinks for first threads....
In Android 10 there are no voice files stored in
\data\data\com.google.android.tts\ !!!???
Although several country voices exist in the settings / apps offline!
Where does Android 10 store them?
found it out: \data\user_de\0\com.google.android.tts\files\superpacks\
hello
I tried the following :
1) I downloaded the proto file
https://dl.google.com/dl/android/tts/v3/voices-list-r1.proto
2) I found the URL for my language and downloaded the zvoice file but for V3:
https://dl.google.com/dl/android/tts/v3/fr-fr-x-vlf-phone-hmm-r3.zvoice
3)I can't find the location to put the files from the archive
\data\user_de\0\com.google.android.tts\files\superpacks\
I don't have such folder on my device. it's running Android 10 also.
someone elsewhere was saying to put in /system/tts/google but folder doesn't exists / I don't have write access
any idea ?