[KERNEL] 2.6.29.6-nAa-ics-04 [5/7/12] Custom ICS kernel + CWM Recovery - XPERIA X8 Original Android Development

Search no more. This is THE kernel for your ICS X8.
Before unlocking your bootloader, read this thread
If you brick your device, you are the sole responsible.
Preface:
If you use this kernel on a gingerbread ROM, I will laugh at your noobness
If you use this kernel on a stock ROM, it will cook you dinner
Features:
Forked from nAa-11
Built with linaro-4.7.1 toolchain
Full ICS support
CWM-Based Recovery 5.5.0.4
Genlock: backported from CAF 3.0
Socinfo and internal_power_rail ported from CAF 3.0
KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
netfilter: add xt_qtaguid table support for network statistics
netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
binder: backported from CAF 3.0
SmartassV2 bugfixes
Bluetooth tethering support
ICS ramdisk and related fixes
KSM backported from latest SE sources / fixes from CAF 3.0
FAQ:
If you have any issues, please read the FAQ thread first: http://forum.xda-developers.com/showthread.php?t=1575831
Requirements:
Unlocked bootloader --> http://forum.xda-developers.com/showthread.php?t=1254225
MiniCM9 or any ICS, source-based ROM (install this kernel first, then install the ROM)
Flashtool tested to be working with your phone, e.g. from here: http://www.multiupload.com/GYL7A7XQBT Original flashtool thread: http://forum.xda-developers.com/showthread.php?t=920746
Install:
Backup
Unlock your bootloader as described here: http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3 or here: http://forum.xda-developers.com/showthread.php?t=1254225
Download the kernel ftf file from here and move it to Flashtool\firmwares so that Flashtool can pick it up
Flash the kernel via Flashtool
Reboot and you should see the kernel boot animation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Uninstall:
Flash back to stock using Flashtool or SEUS.
Performance:
Notes:
Dualtouch (for synaptics):
If you want to enable the fake DT by dx (instead of andrej456's which is the default), you have to insert the following line in the /system/etc/hw_config.sh file:
insmod /system/lib/modules/synaptics_i2c_rmi4_dt.ko
Click to expand...
Click to collapse
If you want to remove the fake DT altogether, insert the following line in the /system/etc/hw_config.sh file:
insmod /system/lib/modules/synaptics_i2c_rmi4_no_dt.ko
Click to expand...
Click to collapse
Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
https://github.com/nobodyAtall/nAa-kernel-ics
Donate:
If you are enjoying my work please consider donating:
.
Donations are voluntary but allow me to spend more time on this project.​
Disclaimer:
I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
​

Changelog:
nAa-ics-04
Built with linaro-4.7.1 toolchain
Ramdisk improvements
Tune dirty_background_ratio and vm_dirty_ratio
A bit more ram reclaimed
Better dual touch for mimmi
nAa-ics-03
Updated recovery: CWM-Based Recovery 5.5.0.4
Latest busybox from ICS sources
Some more RAM (185MB total ram reported by ICS)
Ramdisk optimizations
yaffs2 updates
cleancache and support for ext3/4
msm_rotator updates
Binder bugfixes
kgsl impovements and tuning
genlock updates
nAa-ics-02
msm_mdp: Ported from CAF 3.0
MDP_Y_CBCR_H2V2_ADRENO ported from CAF 3.0
kgsl: power management and improvements
Pmem support for camera
New cool kernel boot animation instead of static logo
nAa-ics-01
Forked from nAa-11
Full ICS support
Genlock: backported from CAF 3.0
Socinfo and internal_power_rail ported from CAF 3.0
KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
netfilter: add xt_qtaguid table support for network statistics
netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
binder: backported from CAF 3.0
SmartassV2 bugfixes
Bluetooth tethering support
ICS ramdisk and related fixes
KSM backported from latest SE sources / fixes from CAF 3.0

Reserved for extra notes

OOO MAAA GAWWWSS!!! :O I not going somewhere important just to see this greatness unfold!!

Oh my gosh! Oh my gosh! If I can, I am going to refresh these 2 threads until midnight!
Sent From XDA Premium Using My W8!!

So excited :-O

You should give lessons on how to troll and tease people

Ok this is getting real
hope ill sleep today with fully working ics in my phone

this day will be remembered as the day, when nAa trolled us all

hahaha !! nAa you are the MASTER of masters

Oh sh*t,
ICS INCOMING !
TAKE EVASIVE MANUEVERS !!!

Nobody and the adreno drivers? This is because, the camera don't work right?

nAa you rule!

nobodyAtall said:
Notes:
If you use this kernel on a gingerbread ROM, I will laugh at your noobness
If you use this kernel on a stock ROM, it will cook you dinner
Click to expand...
Click to collapse
Still laughing on the second point... though I wish it could...
Post the links fast! Stop teasing, now you know we all are already excited

In the picture I can see that we will have more 4mb of ram with ICS kernel
188MB of ram total!

Wonderful!!!!
Are we seriously getting full ics suport... one more kick to SonyEricsson telling us froyo isnt stable for us... Lols

Limited to 8 thanks a day
but THANKS, you'll earn a beer from me
Edit

damn i already thought i can download but the words are just colored in orange....

So we poor men who have sim unlocked by omnius and can't unlock bootloader won't have any chance to have full working ICS? :-(

Yaaaaaaaaahoooooooooooooooo

Related

[KERNEL] nAa-ics-04 [5/7/12] Custom ICS kernel + CWM Recovery

Search no more. This is THE kernel for your ICS X10mini.
Before unlocking your bootloader, read this thread
If you brick your device, you are the sole responsible.
Preface:
If you use this kernel on a gingerbread ROM, I will laugh at your noobness
If you use this kernel on a stock ROM, it will cook you dinner
Features:
Forked from nAa-11
Built with linaro-4.7.1 toolchain
Full ICS support
CWM-Based Recovery 5.5.0.4
Genlock: backported from CAF 3.0
Socinfo and internal_power_rail ported from CAF 3.0
KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
netfilter: add xt_qtaguid table support for network statistics
netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
binder: backported from CAF 3.0
SmartassV2 bugfixes
Bluetooth tethering support
ICS ramdisk and related fixes
KSM backported from latest SE sources / fixes from CAF 3.0
FAQ:
If you have any issues, please read the FAQ thread first: http://forum.xda-developers.com/showthread.php?t=1575831
Requirements:
Unlocked bootloader --> http://forum.xda-developers.com/showthread.php?t=1254225
MiniCM9 or any ICS, source-based ROM (install this kernel first, then install the ROM)
Flashtool tested to be working with your phone, e.g. from here: http://www.multiupload.com/GYL7A7XQBT Original flashtool thread: http://forum.xda-developers.com/showthread.php?t=920746
Install:
Backup
Unlock your bootloader as described here: http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3 or here: http://forum.xda-developers.com/showthread.php?t=1254225
Download the kernel ftf file from here and move it to Flashtool\firmwares so that Flashtool can pick it up
Flash the kernel via Flashtool
Reboot and you should see the kernel boot animation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Uninstall:
Flash back to stock using Flashtool or SEUS.
Notes:
Dualtouch:
If you want to enable the fake DT by dx (instead of andrej456's which is the default), you have to insert the following line in the /system/etc/hw_config.sh file:
insmod /system/lib/modules/synaptics_i2c_rmi4_dt.ko
Click to expand...
Click to collapse
If you want to remove the fake DT altogether, insert the following line in the /system/etc/hw_config.sh file:
insmod /system/lib/modules/synaptics_i2c_rmi4_no_dt.ko
Click to expand...
Click to collapse
Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
https://github.com/nobodyAtall/nAa-kernel-ics
Donate:
If you are enjoying my work please consider donating:
.
Donations are voluntary but allow me to spend more time on this project.​
Disclaimer:
I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
​
Changelog:
nAa-ics-04
Built with linaro-4.7.1 toolchain
Ramdisk improvements
Tune dirty_background_ratio and vm_dirty_ratio
A bit more ram reclaimed
Better dual touch for mimmi
nAa-ics-03
Updated recovery: CWM-Based Recovery 5.5.0.4
Latest busybox from ICS sources
Some more RAM (185MB total ram reported by ICS)
Ramdisk optimizations
yaffs2 updates
cleancache and support for ext3/4
msm_rotator updates
Binder bugfixes
kgsl impovements and tuning
genlock updates
nAa-ics-02
msm_mdp: Ported from CAF 3.0
MDP_Y_CBCR_H2V2_ADRENO ported from CAF 3.0
kgsl: power management and improvements
Pmem support for camera
New cool kernel boot animation instead of static logo
nAa-ics-01
Forked from nAa-11
Full ICS support
Genlock: backported from CAF 3.0
Socinfo and internal_power_rail ported from CAF 3.0
KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
netfilter: add xt_qtaguid table support for network statistics
netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
binder: backported from CAF 3.0
SmartassV2 bugfixes
Bluetooth tethering support
ICS ramdisk and related fixes
KSM backported from latest SE sources / fixes from CAF 3.0
FAQ direct link and last Questions
Read Before Asking Please
FAQ for MiniCM9 and nAa kernel
reading may answer to lots of your questions !
for X10mini, X8 & x10miniPRO
i decided to create a new thread dedicated to Q&A about miniCM9
this thread is the place of your questions, answers, tips about miniCM9 and nAa ics kernel
so please, as usual, read FAQ, use search option or anything else before asking commonly answered questions
the FAQ will be incremented when needed
the Q&A is written as Q are asked
something else that is useful to read before asking :
Here we (nearly all? XDA members, regardless of being devs or only users [like me], me at least ) don't care about your good/bad English the important is trying to be understood and to understand the content of the threads
only ask things you can't find, or you don't understand, please if you don't understand something in any process tell us exactly where is your problem : it will optimize the answer
sometime rephrasing things can make you understand better, feel free to help us for making the most understandable sentence for anybody
BUT if you don't make the effort to read, I won't make the effort to answer (ok, you can't read everything... but read the minimum )
Chatroom for support is now available (http://minicm.ie.tc/)
clic on the red text above
register, and then enjoy ​________________________________
clic here for : FAQ
this post will be updated with the very last Questions added to FAQ about the KERNEL for quick view
4/ why flastool doesn't flash the kernel i choose? (any version)
when there are lots of kernel builds in flashtool firmware folder, flashed kernel might not be the right one,
to void this, create a folder in it, cut/paste all your previous kernel there
and only keep the one you want to flash in the firmware folder
then, start flastool and process flashing operations
reserved...........
God bless old-line xperia developers!
I think it does not work at x8. Or yes?
I have not link. Error 404 Page not found.
Please can you the link checken?
Sorry my bad english, hope you understand me, Thanks and greets from Germany
Edit: Found it now! , will tyr it now...
Many thanks dear nobody!
Sent from my E10i.
FTF link not working.... some error 404 file not found on server
EDIT: got ftf from here link fixed
waiting the rom!!!
nAa-ics-02 download link is up!
Enjoy
"If you use this kernel on a gingerbread ROM, I will laugh at your noobness
If you use this kernel on a stock ROM, it will cook you dinner"
Hahahaha
Congrats men
Sent from my SK17a using xda premium
Thanks
nobodyAtall said:
nAa-ics-02 download link is up!
Enjoy
Click to expand...
Click to collapse
Thanks trying now will report about bugs
hectorrai said:
Thanks Trying will report about bugs
Click to expand...
Click to collapse
knowing nobodyatall not think I have bugs in this kernel, jajajjaja because it is simply the best, what a shame I left my mini,
PLEASE DEVELOP FOR XPERIA NOBODYATALL MINI PRO 2, many of us have gone to that device.
ronaldvalles said:
knowing nobodyatall not think I have bugs in this kernel, jajajjaja because it is simply the best, what a shame I left my mini,
PLEASE DEVELOP FOR XPERIA NOBODYATALL MINI PRO 2, many of us have gone to that device.
Click to expand...
Click to collapse
You already have official ICS instead. :/
Tom.K said:
You already have official ICS instead. :/
Click to expand...
Click to collapse
yes but with some errors as accelerometer and battery drain, you can fix this nobodyatall,
Great
Thanks. I suscribe
ronaldvalles said:
knowing nobodyatall not think I have bugs in this kernel, jajajjaja because it is simply the best, what a shame I left my mini,
PLEASE DEVELOP FOR XPERIA NOBODYATALL MINI PRO 2, many of us have gone to that device.
Click to expand...
Click to collapse
Not bugs here but the bugs on MINI CM9
Sent from my E10i using xda premium
kernel screen is VERY VERY GOOD. LIKED it. THANKS NOBODYatALL.
xminirom said:
kernel screen is VERY VERY GOOD. LIKED it. THANKS NOBODYatALL.
Click to expand...
Click to collapse
Yeah it has got some animations ....very good than previous nAa 11 screen
Sent from my E10i using xda premium
I've got a problem on flashing this new kernel , because my device could not start in flash mode .
I have tried many times to do this (Shutt down and press back button). It's still reboot and reboot to CWM .
Does it possible about flashing kernel by flash "update.zip" procedure ? ( Help me bro @nobodyatall ) -- give me the update.zip ics kernel,plz

[KERNEL] 2.6.29.6-nAa-ics-04 [5/7/12] Custom ICS kernel + CWM Recovery

Search no more. This is THE kernel for your ICS X10minipro.
Before unlocking your bootloader, read this thread
If you brick your device, you are the sole responsible.
Preface:
If you use this kernel on a gingerbread ROM, I will laugh at your noobness
If you use this kernel on a stock ROM, it will cook you dinner
Features:
Forked from nAa-11
Built with linaro-4.7.1 toolchain
Full ICS support
CWM-Based Recovery 5.5.0.4
Genlock: backported from CAF 3.0
Socinfo and internal_power_rail ported from CAF 3.0
KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
netfilter: add xt_qtaguid table support for network statistics
netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
binder: backported from CAF 3.0
SmartassV2 bugfixes
Bluetooth tethering support
ICS ramdisk and related fixes
KSM backported from latest SE sources / fixes from CAF 3.0
FAQ:
If you have any issues, please read the FAQ thread first: http://forum.xda-developers.com/showthread.php?t=1575831
Requirements:
Unlocked bootloader --> http://forum.xda-developers.com/showthread.php?t=1254225
MiniCM9 or any ICS, source-based ROM (install this kernel first, then install the ROM)
Flashtool tested to be working with your phone, e.g. from here: http://www.multiupload.com/GYL7A7XQBT Original flashtool thread: http://forum.xda-developers.com/showthread.php?t=920746
Install:
Backup
Unlock your bootloader as described here: http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3 or here: http://forum.xda-developers.com/showthread.php?t=1254225
Download the kernel ftf file from here and move it to Flashtool\firmwares so that Flashtool can pick it up
Flash the kernel via Flashtool
Reboot and you should see the kernel boot animation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Uninstall:
Flash back to stock using Flashtool or SEUS.
Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
https://github.com/nobodyAtall/nAa-kernel-ics
Donate:
If you are enjoying my work please consider donating:
.
Donations are voluntary but allow me to spend more time on this project.​
Disclaimer:
I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
​
Changelog:
nAa-ics-04
Built with linaro-4.7.1 toolchain
Ramdisk improvements
Tune dirty_background_ratio and vm_dirty_ratio
A bit more ram reclaimed
Better dual touch for mimmi
nAa-ics-03
Updated recovery: CWM-Based Recovery 5.5.0.4
Latest busybox from ICS sources
Some more RAM (185MB total ram reported by ICS)
Ramdisk optimizations
yaffs2 updates
cleancache and support for ext3/4
msm_rotator updates
Binder bugfixes
kgsl impovements and tuning
genlock updates
nAa-ics-02
msm_mdp: Ported from CAF 3.0
MDP_Y_CBCR_H2V2_ADRENO ported from CAF 3.0
kgsl: power management and improvements
Pmem support for camera
New cool kernel boot animation instead of static logo
nAa-ics-01
Forked from nAa-11
Full ICS support
Genlock: backported from CAF 3.0
Socinfo and internal_power_rail ported from CAF 3.0
KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
netfilter: add xt_qtaguid table support for network statistics
netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
binder: backported from CAF 3.0
SmartassV2 bugfixes
Bluetooth tethering support
ICS ramdisk and related fixes
KSM backported from latest SE sources / fixes from CAF 3.0
Reserved.........
nAa-ics-02 for the mimmi is released!
Use it with MiniCM9 for best results
Enjoy!
Hopefully it will work, suprised that it was released today!
The best kernel for ICS go go go nAa your the best...........AND THANKS
Amazing nAa! You did it again. Sadly my MP will never taste ICS as. Its USB port is broken and cannot be flashed... But still, thank you for taking the time and effort to get this working
Sent from my U20i using xda premium
x10man said:
Amazing nAa! You did it again. Sadly my MP will never taste ICS as. Its USB port is broken and cannot be flashed... But still, thank you for taking the time and effort to get this working
Sent from my U20i using xda premium
Click to expand...
Click to collapse
You should look into making kernel flashing via CWM work
Thanks nAa
Wonderfull, Geart Work
FAQ direct link and last Questions
Read Before Asking Please
FAQ for MiniCM9 and nAa kernel
reading may answer to lots of your questions !
for X10mini, X8 & x10miniPRO
i decided to create a new thread dedicated to Q&A about miniCM9
this thread is the place of your questions, answers, tips about miniCM9 and nAa ics kernel
so please, as usual, read FAQ, use search option or anything else before asking commonly answered questions
the FAQ will be incremented when needed
the Q&A is written as Q are asked
something else that is useful to read before asking :
Here we (nearly all? XDA members, regardless of being devs or only users [like me], me at least ) don't care about your good/bad English the important is trying to be understood and to understand the content of the threads
only ask things you can't find, or you don't understand, please if you don't understand something in any process tell us exactly where is your problem : it will optimize the answer
sometime rephrasing things can make you understand better, feel free to help us for making the most understandable sentence for anybody
BUT if you don't make the effort to read, I won't make the effort to answer (ok, you can't read everything... but read the minimum )
Chatroom for support is now available (http://minicm.ie.tc/)
clic on the red text above
register, and then enjoy ​________________________________
clic here for : FAQ
this post will be updated with the very last Questions added to FAQ about the KERNEL for quick view
4/ why flastool doesn't flash the kernel i choose? (any version)
when there are lots of kernel builds in flashtool firmware folder, flashed kernel might not be the right one,
to void this, create a folder in it, cut/paste all your previous kernel there
and only keep the one you want to flash in the firmware folder
then, start flastool and process flashing operations
nobodyAtall said:
You should look into making kernel flashing via CWM work
Click to expand...
Click to collapse
Good idea! I hope you weren't trolling there where can i get mini cwm sources?oh. Theyre in naa kernel. Derp
Sent from my U20i using xda premium
x10man said:
Good idea! I hope you weren't trolling there where can i get mini cwm sources?oh. Theyre in naa kernel. Derp
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Is that even possible to do for our phones? It would be awesome because we wouldn't take risks when connecting to USB, like I've experienced before.
Tom.K said:
Is that even possible to do for our phones? It would be awesome because we wouldn't take risks when connecting to USB, like I've experienced before.
Click to expand...
Click to collapse
I think you can mount the partition that holds the kernel and make CWM write to it. I hope cos my phone deserves some working. ICS after what its been through
Sent from my U20i using xda premium
can anyone help me?
05/002/2012 16:02:42 - ERROR -
05/002/2012 16:02:42 - ERROR - Error flashing. Aborted
05/002/2012 16:02:43 - INFO - Device connected in flash mode
05/003/2012 16:03:01 - INFO - Device disconnected
05/003/2012 16:03:04 - INFO - Device connected with USB debugging off
05/003/2012 16:03:04 - INFO - For 2011 devices line, be sure you are not in MTP mode
USB debugging on
x10man said:
I think you can mount the partition that holds the kernel and make CWM write to it. I hope cos my phone deserves some working. ICS after what its been through
Sent from my U20i using xda premium
Click to expand...
Click to collapse
You need kernel modifications for it - probably no changes to CWM. flash_image is the tool for flashing an image, e.g. a kernel to the specified partition. Note that there is a -close to 100%- chance of bricking your phone when you try such kernel changes, so you'd better have a JTAG solution available.
If you use this kernel on a gingerbread ROM, I will laugh at your noobness
If you use this kernel on a stock ROM, it will cook you dinner
Click to expand...
Click to collapse
Thanks for the ROM+kernel dude! You are uber-awesome!
nobodyAtall said:
You need kernel modifications for it - probably no changes to CWM. flash_image is the tool for flashing an image, e.g. a kernel to the specified partition. Note that there is a -close to 100%- chance of bricking your phone when you try such kernel changes, so you'd better have a JTAG solution available.
Click to expand...
Click to collapse
I can dismantle my phone so i could get to jtag header just probably not use it. Worth a try, maybe in November after my upgrade
Sent from my U20i using xda premium
x10man said:
Amazing nAa! You did it again. Sadly my MP will never taste ICS as. Its USB port is broken and cannot be flashed... But still, thank you for taking the time and effort to get this working
Sent from my U20i using xda premium
Click to expand...
Click to collapse
This is how u fixed mine usb port. With first try I only fix charging but than I try once again annd now works charging and connecting with pc..
sent from x10mp
matthias1203 said:
This is how u fixed mine usb port. With first try I only fix charging but than I try once again annd now works charging and connecting with pc..
sent from x10mp
Click to expand...
Click to collapse
The soldering is gone on mine. And my soldering iron is a wedge tip so i cant re- solder it
Sent from my U20i using xda premium

[Kernel][ICS][Active|Mini|MiniPro|LWW] KernelPanic v1.25 | 11.09.12

Code:
Your warranty is now void.
Flashing Custom Kernels always bares a chance of radiation leading to infecting your cells with the zombie virus!
Hi there, I wanted a Kernel mostly close to stock which is easy to root and also has overclocking in it. So I decided to compile the newest SE Source and added in a few small changes within the config and the source code. I hope you guys have a use for it too.
Benchmarks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NenaMark 2 Result list
Info
Kernel 2.26.9
Latest sources from SE (4.1.B.0.587 released on August 22nd 2012)
Features
CWM 6 in Kernel
very light and very fast
improved 3D/2D snappiness
ro.secure=0 should ease your rooting
added Overclocking to 1.6GHz
added various CPU Govenors
compiled in Deadline,NOOP, CFQ and SIO I/O Schedulers
Additions to Netfilter
KSM Kernel Page Merging
Ext4, ZRAM, NTFS, SWAP
Init.d support
Improved SD Card Performance
Increased readahead DMA and VM
Tiny RCU
Requirements
4.1.B.0.431 ICS
open Bootloader
Flashtool to flash the Kernel
Installation
unzip the file to get Boot.img
open Flashtool
select Fastboot
flash the Boot.Img
Download
Mini ST15 v1.25 http://www.mediafire.com/?zl1rs71qdwbfo3d
Mini Pro SK17 v1.25 http://www.mediafire.com/?7vx272h06he1tp5
LWW WT19 v1.25 http://www.mediafire.com/?y94me1g2u9n0b33
Active ST17 v1.25 http://www.mediafire.com/?9bi95tndzz54k58
NEW v2 - Kernel Additions (Modules,3D) (for anybody not using Stock ROM)
http://www.mediafire.com/?i8oa56yuu1rz0o3
Need Root Files? Flash via CWM
http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
Need more 3D Performance Original Thread Here
Download 3D Drivers
Credits
Everybody contributing to CWM Recovery!
FreeXperia team for CPU available scaling frequency
DoomLord for CPU Govenors original thread for excellent DoomKernel: DoomKernel
The Linux Kernel Team
Gustavo RD78 for testing and all the other brave beta testers
Changelog v1.25
fixed color conversion on video
Changelog v1.24
built with linaro toolchain 4.7
patched genlock and msm-kgsl with CodeAurora Patches - 3D Performance increased alot on 1GHz, small increase on overclocking
added TINY RCU
patched per cpu function and KSM with Code Aurora
changed msm-kgsl to physical pages and increased PMEM
Increased Camera MEM -> now smooth as pie recording in 720p possible without stutter.
Changelog v1.23
greatly improved SD card performance (Test with SD Tools or another Programm like that, you will notice it also in everyday usage, Antutu doesnt seem to pick it up)
increased DMA for NAND (improved Database IO by a little bit)
less tearing due to vsync disabled and more steady FPS with less hickups
improved camera preview (less stutter on focus)
IP-Tunneling
CIFS support
Changelog v1.22
added SIO
added Release for Active
lots of small changes
Changelog v1.21
fixed issues on Mini and LWW
added Releases for Mini and LWW
fixed sdcard Mounting in CWM
Changelog v1.2
due to popular demand added CWM
Changelog v1.1
Increased GPU Mem
Increased VM Readahead to 512
enabled KSM
disabled HW VSync since it seems completely broken anyway
gained smooth Scrolling 2D speed, 3D Performance increase
gained faster IO (however this might not be ideal for very big apps)
Github.com/slade87
Good work! You could cover the appliances LWW / Active and Xperia Mini
Enviado do meu Smultron
nice work man waiting for this...
Gustavo RD78 said:
Good work! You could cover the appliances LWW / Active and Xperia Mini
Enviado do meu Smultron
Click to expand...
Click to collapse
+1.
anyway nice work.thanks a lot OP. :good:
Can someone tell if it works on fxp cm10 rom?
mauam said:
Can someone tell if it works on fxp cm10 rom?
Click to expand...
Click to collapse
Only works on ics
Sent from my SK17i using Xparent Purple Tapatalk 2
kernel panic
just like x10 mini pro's zombiepanic
nice slade
Great kernel slade, thanks for the effort. Nice to see you around, haven't seen you since my x10 mini pro days.
Great job,
Evil.
LOL great work!!!
Keep going!:laugh:
official ICS roms only? or will it work with CM9?
Gustavo RD78 said:
Good work! You could cover the appliances LWW / Active and Xperia Mini
Enviado do meu Smultron
Click to expand...
Click to collapse
+1
Good work slade.
We all miss you, Slade. Thank you!
Any ICS Rom should work.
Sent from my SK17i using xda premium
nice!!! I was waiting for a new kernel !!!!:good:
For which devices??
i hope you can add cwm recovery. thanx
afeeq said:
i hope you can add cwm recovery. thanx
Click to expand...
Click to collapse
+1
I wasnt sure myself if i should add cwm as i wanted it as stock as can be. But i'll add it in the Future. I am also working on a jb Version with a Rom as well.
Sent from my SK17i using xda premium
Gustavo RD78 said:
Good work! You could cover the appliances LWW / Active and Xperia Mini
Enviado do meu Smultron
Click to expand...
Click to collapse
+1
Yay you seem to have switched to the next-gen pocket phone with keyboard yay
Have fun!
Hi slade

[KERNEL][JB]Jelly Bean Mini Project | v04 | 26/10/2012 | Released

Jelly Bean Mini Project
Info:
This kernel is part of JB Mini Project
Team Members: Stelios97, Daveee10
Features:
Forked from nAa-ics-04 (all ICS features are already in there)
Built with linaro-4.7.1 toolchain
JBMini Recovery
Custom mtd partitioning scheme suitable for JB
Tracing support for JB
pmem: bring up2date with CAF 2.6.38
genlock/kgsl fixes
Triple buffering support for msm framebuffer
Much more RAM for improved multitasking experience (195MB)
Resized partitions (System:260MB, Data:200MB, Cache:8MB)
Install Instructions:
Unlock your bootloader
Download the kernel ftf file and move it to Flashtool\firmwares
Flash the kernel via Flashtool
(First time only) Get into recovery and format /system /cache and /data manually
Download:DON'T mirror kernel​
v04: E10i_JBMiniProject_v04
v03: E10i_JBMiniProject_v03 (Not Released for X10 Mini)
v02: E10i_JBMiniProject_v02
v01: E10i_JBMiniProject_v01
Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
https://github.com/JBMiniProject/semc-kernel-msm7x27-jb
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks:
NobodyAtall
Azuzu
Doixanh
Google
Daveee10
And all who posting patches to gerrit
Please don't ask ETA!​Press
button or
if you like and want to support this project!​
Changelog
Changelog:
2012.10.26 (v04) - Some improvements
-Added SLQB memory allocator
-Lowmemorykiller small fix
-Patch for ScreenOff (Electron Beam) Animation
-RWSEM update to 2.6.35
-Futex backport from 2.6.32
-lib-CRC32 & crypto-CRC32 updates
-update jHash to V3
-New recovery (JBMini Recovery 1.0)
2012.09.08 (v03) - Add some features (Not Released for X10 Mini)
-New CWM Recovery (JBMini CWM Recovery 6.0.1.1)
-Built in Aroma File Manager
-Triple buffering now working
-KGSL/genlock fix
-Some free memory (192MB) [thx to nAa]
-Resized partitions (System:260MB, Data:200MB, Cache:8MB)
2012.08.04 (v02) - Add some features
-Enabled vsync
-Enabled tripple buffering
-Lower gain value
2012.07.22 (v01) - First release
Development
Development: [in next release]
Stellios need some SMART testers !
HELLO guys ! I am a tester of JB mini project ! And Stellios still needed some testers ( but he need is a GOOD TESTER )
1) Tester must have mutch time to test the ROM
2) Tester must be smart
3) Tester must hear all Stellios commands
If someone wants to be a tester then wright down ur wish !
Kernel Released!
kernel 04 is release but rom seems not to be available for the moment hope we could test it as soon as possible ..
Thanks in advance.
I think JBMP Recovery is the best part of this kernel. Thanks Stelios 97!
ktg7777 said:
I think JBMP Recovery is the best part of this kernel. Thanks Stelios 97!
Click to expand...
Click to collapse
Yeah in nAa kernel, when I install zip from SD card, I have to press volume key one by one but this kernel only needs to press volume key long to browse things that ate way far in the bottom.
Sent from my E10i using Tapatalk 2
Just out of my curiosity, will this kernel work on all other JB Roms?
ktg7777 said:
Just out of my curiosity, will this kernel work on all other JB Roms?
Click to expand...
Click to collapse
Maybe. We don't decided how change things for other JB roms or not... We thinking on it now...
Maybe... Be patient and wait next release... That's include lot of performance tweaks and some backported things... The v06 version.. Stelios can release v05 if he mind and he's got time...
Daveee10 said:
Maybe. We don't decided how change things for other JB roms or not... We thinking on it now...
Maybe... Be patient and wait next release... That's include lot of performance tweaks and some backported things... The v06 version.. Stelios can release v05 if he mind and he's got time...
Click to expand...
Click to collapse
That sounds good. I will wait. That way we can have both kernel like [Rom] Aaaaaaaa | nAa and Jbmp | 2011 11 11
ktg7777 said:
That sounds good. I will wait. That way we can have both kernel like [Rom] Aaaaaaaa | nAa and Jbmp | 2011 11 11
Click to expand...
Click to collapse
maybe
v04: E10i_JBMiniProject_v04 link is dead
Gammapooka said:
v04: E10i_JBMiniProject_v04 link is dead
Click to expand...
Click to collapse
Use nAa JB kernel, it's good
Sent from my E10i using xda premium
It's so good that my sim isnt reconized (but it could be the rom to)
Gammapooka said:
It's so good that my sim isnt reconized (but it could be the rom to)
Click to expand...
Click to collapse
Is this the first thing you tried after unlocking your bootloader? Because that may be the cause of your sim not getting recognised.
After unlocking my bootloader i installed first the latest nAa JB kernel and after that i flashed Jelly Bean Mini Project | Android 4.1.2 JB-CM10.
Can not find any provider after booting up.
After that i did try the info under Common problems (http://forum.xda-developers.com/showthread.php?t=1254225)
1. My SIM Card is not recognised after unlocking phone with msm7227_setool2.cmd!
Ans: Redo unlocking procedure (step 5 onwards) using msm7227_semc.cmd.
Click to expand...
Click to collapse
But this isnt working for me.
I have root acess.
Putting back the original kernel and rom have the same problem
Gammapooka said:
After unlocking my bootloader i installed first the latest nAa JB kernel and after that i flashed Jelly Bean Mini Project | Android 4.1.2 JB-CM10.
Can not find any provider after booting up.
After that i did try the info under Common problems (http://forum.xda-developers.com/showthread.php?t=1254225)
But this isnt working for me.
I have root acess.
Putting back the original kernel and rom have the same problem
Click to expand...
Click to collapse
You need to go back to stock and relock the bootloader first, before you start again. (The ONLY safe way to relock the bootloader is using the Restore-button in S1Tool). Then boot up your phone and hope your signal comes back.
If your phone was simlocked to a provider you may need to get an IMEI-code in order to sim-unlock it and then unlock the booloader successfully.
SmG67 said:
You need to go back to stock and relock the bootloader first, before you start again. (The ONLY safe way to relock the bootloader is using the Restore-button in S1Tool). Then boot up your phone and hope your signal comes back.
If your phone was simlocked to a provider you may need to get an IMEI-code in order to sim-unlock it and then unlock the booloader successfully.
Click to expand...
Click to collapse
My phone was already unlocked when i did buy it
I'll try your info tomorrow. thnx !
Ok, i did go back to stock and relocked it.
I booted my phone and now it's hanging at "Sony Ericsson" and it keeps rebooting after 10 seconds.....
SEUS do not work also (before it did) it keeps saying i have the latest update
[edit]
Reflashed again with some spanish stock rom and everything is working.
But..... i dont know any spanish LOL !
At least it is working, but my battery is to low to flash another english stockrom i just found.
Will continue tomorrow.

[KERNEL][9.x]Infected Kernel R3[01-03-2019]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war or your phone gets derped. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Kernel features:-
Upstreamed to latest Linux 4.9.x
Upstreamed to latest changes by CAF and lineageOS
Compiled with latest DragonTc-9.0
Couple of new i/o -> maple,anxiety
Compatible with AOSP/MIUI Pie Roms
Sound Control
Dynamic stune boost
Simple gpu algorithmn
Spectrum Support
flar' Vibration Control
Upstreams from different sources
No OvErClOcK stuff here
Toggle for CRC check and fsync,for the antutu bois
Westwood as default TCP
lz4 as default compressor
Many other stuff which i forgot,have a look into kernel source.feel free to explore them
Click to expand...
Click to collapse
Recommended app for tuning: EX Kernel Manager/Kernel Adiutor/Spectrum/Smartpack Kernel Manager
HOW To FLASH?
Keep the kernel.zip in your ext sd/internal sd.
Boot to latest TWRP(recommended)
dirty flash your stock boot.img(if coming from another kernel)
Flash the Kernel.zip
Reboot!
Click to expand...
Click to collapse
BUGS:
idk,you tell me :v
Downloads----> AndroidFileHost/Google Drive
Telegram: Group/Telegram Channel
Credits: Well ofcourse to abhishek987,bgcngm,akhilnarang,franciscofranco,the lineageOS team,osm0sis,flar2 and all other developers for their contributions!
XDA:DevDB Information
Infected Kernel, Kernel for the Xiaomi Poco F1
Contributors
neonkat
Source Code: [url]https://github.com/neonkat/beryllium_kernel.git[/URL]
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R3
Stable Release Date: 2019-03-01
Created 2019-02-06
Last Updated 2019-03-01
Changelog
R2
*merged v4.9.158
*merged feb patch changes
*zram updates and uses lz4 as default compressor
*updated tc and using polly optimisations
*performance improvement
*hdr fix
*lineage and other upstreams
R3
*merged v4.9.161
*merged LA.UM.7.3.r1-06900-sdm845.0
*using 2.3 Ghz on big cluster as default Frequency
*some other cleanup and upstreams
Reserved
*thanks to devdb for getting derped and reserving so many posts*
noice kernal m8!
My comment was removed with no mention of the thread being cleaned, that's odd, the more kernels the better, thanks
Can i install this on pixel experience?
Derp kernel is already install..
Can i overclock my GPU???
great work thanks
Sarthok Pahan said:
Can i overclock my GPU???
Click to expand...
Click to collapse
Did you read the first post...
"No OvErClOcK stuff here"
Antutu score on custom roms??
Sarthok Pahan said:
Can i install this on pixel experience?
Derp kernel is already install..
Can i overclock my GPU???
Click to expand...
Click to collapse
no gpu "overclock" thing here,and that' meme.(are you thinking of doing "deep learning" stuff?)
Ujjayan said:
Antutu score on custom roms??
Click to expand...
Click to collapse
These scores are on default settings.you can make some hacks around with kernel tuner apps to get those scores for bragging.
One question. Is the kernel really Infected?
Rowdyy Ronnie said:
One question. Is the kernel really Infected?
Click to expand...
Click to collapse
???
it's not for nothing but a pile of plutonium is needed to get to the end of the day, but everything will go
Latest Beta v1.3 is very nice. Without any tweaks, the performance is so smooth and gives me good battery life. Thank you for your work on this. Please keep the updates coming :highfive:
Updates!
R2 is UP!
Changelog:
*merged v4.9.158
*merged feb patch changes
*zram updates and uses lz4 as default compressor
*updated tc and using polly optimisations
*performance improvement
*hdr fix
*lineage and other upstreams
Beta builds are pushed only on telegram. Download links are up in post #1.
R2 is smooth, great update. But micro sd not detected.
donijokay said:
R2 is smooth, great update. But micro sd not detected.
Click to expand...
Click to collapse
working fine for me on havoc 2.2
Michael Anish said:
Latest Beta v1.3 is very nice. Without any tweaks, the performance is so smooth and gives me good battery life. Thank you for your work on this. Please keep the updates coming :highfive:
Click to expand...
Click to collapse
any sot ?

Categories

Resources