Loose glass around edges of TF201 - Asus Eee Pad Transformer Prime

I was just wondering if anybody else has an issue with loose glass panel towards the edges of your asus transformer prime? In particular folks who just purchased one. There is about a 1/4" of play mostly at the top/left side of the screen around the volume rocker and to a lesser extent on the right side. It's not a lot, but noticable since that's right where you normally hold it.
I already exchanged it for another one at Office Depot, and this new one has the exact same issue. I can't imagine this would be "normal." Maybe just a defective batch? In either case, I haven't noticed any other issues in the 2 days I had the first one.
They both started with S/N# C30KAS...

C1O from office depot reporting in. Have the exact same issue, right out of the box. My case does make it unnoticeable, though. I'd hate to have to rma it for this.

It is not normal. There are little hatches which hold glass to the frame. If they are broken (they are very thin, I guess they can easily be broken on assembly line) there is no way to fix it apart from taking it apart completely and putting some double sided tape. I would, and did, return it.
Sent from my HTC Sensation Z710e using xda premium

omegafiler said:
There is about a 1/4" of play mostly at the top/left side of the screen around the volume rocker
Click to expand...
Click to collapse
Do you realize how much that is? (I assume you mean a quarter inch)
I would just return it.

Yes, it's about a quarter inch. Unfortunately it seems as though these 2 were the last in stock... anywhere. But that's kind of what I thought; just seemed odd to have 2 in a row like that. I guess I'll play with it for a few more days to make sure I still like the TF201 in general and return it later (within the return window). Or maybe if they get a new batch in... exchange it again.

I like to see a picture of this. Quarter inch is really massive.

htcplussony said:
I like to see a picture of this. Quarter inch is really massive.
Click to expand...
Click to collapse
Yeah, it wasn't good, but it's returned now. Although this 2nd one isn't nearly as bad. In fact, it's only loose on the right side. This is probably closer to an 1/8". So it's doesn't go above the outter bezel.
But I guess the question is whether folks consider any play whatsoever acceptable, normal, or something they even care about. In particular if it's in a case. Not to mention the concern that it might get worse or seperate completely.

omegafiler said:
Yeah, it wasn't good, but it's returned now. Although this 2nd one isn't nearly as bad. In fact, it's only loose on the right side. This is probably closer to an 1/8". So it's doesn't go above the outter bezel.
But I guess the question is whether folks consider any play whatsoever acceptable, normal, or something they even care about. In particular if it's in a case. Not to mention the concern that it might get worse or seperate completely.
Click to expand...
Click to collapse
On a good unit there is no play. Actually, there is, but it's so small that you have to be looking for it and even then you'd struggle to find it.
Sent from my HTC Sensation Z710e using xda premium

Had it on a C0 along with light bleed and lint inside the glass...return it 2 days later. Talk about QC...
Sent from my GT-I9100 using XDA

Hmm, maybe I'm just being more picky given the much worse amount of seperation I had with the first device. So here is a quick video I just shot with my phone. Not the best quality, but maybe you guys with "good" primes can let me know what ya think.
Edit: Embed didn't work, so here is the private link.
http://youtu.be/xV6IE16Dj2o?hd=1

I'm having the exact same problem, mine also makes an audible "squeek" when pressed, and the compression is definitely visible. The difference though is that mine came back repaired from when I sent it out for RMA, not a replacement. I'll be getting on the phone tonight with them, as the screen is now also starting to display Mura (which it was sent in for the first time I RMA'd it.), and the screen bleed is getting notibly worse to the point where it is very annoying.

mine is also loose in the upper left hand corner area when held in landscape.

On mine there's still lots of areas I can press down but its under 1mm.
I'm more bummed about dust I now see under the screen. Doesn't Apple laminate the lcd to the screen? Wish Asus done it.

i have the same issue. My wife noticed it and I decided that I could live with it.
Sent from my Transformer Prime TF201 using XDA

To me, this is not a defect. It's definitely an imperfection, but it's not a defect.

goodintentions said:
To me, this is not a defect. It's definitely an imperfection, but it's not a defect.
Click to expand...
Click to collapse
I see it kinda the same way... I only notice it from time to time in landscape mode. But sometimes I have to test the whole side to find the spot again.
I'm having a really great time with the device, can't think about returning it for for this imperfection.

I've got the same problem albeit the flex is very small.

Well, I decided to at least order a MoKo folio cover case and see if that minor flex is still going to be an issue for me or not. I already don't like the way it feels carrying it around by itself. The edges make it feel somewhat awkward and uncomfortable. So maybe the case is all it needs. Because other than that, I haven't found any other issues, yet.

Related

Suggestions - Right side creaking

Well I've just noticed the right side of my tablet has a creak to it. Seems a little loose and am not sure what to do. Am I correct in assuming that the creaking will just get worse in time and potentially come apart completely? Anyone else experiencing this?
Not sure what to do. I've got until Jan. 24th to return it to Best Buy but other than this issue, I love this thing and don't want to get rid of it since the chances of getting a replacement are extremely slim.
I have seen several people comment about the right side seems loose. The bottom right area in the black trim area has a little noise and creak in it when tapped or pressed on mine. My middle left screen area has a little clunk in it when tapped like the glass has a slight gap between in and the screen behind.
I have considered returning mine also because of this but if it is normal, I don't want to since I may get one that is worse. Everything else works fine with mine.
Mine Loose Too
Just got my gray prime 64 yesterday and I did notice the right side of the screen seems loose and protrudes up further than the rest of the display. It almost seems like there might be something too bulky below it preventing it from laying flat.
I have it to, but to the right of the charger slot. It seems like a common issue. You have months worth of repair warranty so if it gets worse you can always send it to ASUS and they'll likely repair it.
Moothead2 said:
I have it to, but to the right of the charger slot. It seems like a common issue. You have months worth of repair warranty so if it gets worse you can always send it to ASUS and they'll likely repair it.
Click to expand...
Click to collapse
Yeah - seems like they all have this defect.
Mine is on the upper left were the volume rocker is. Gets a little annoying.
Sent from my Transformer Prime TF201 using Tapatalk
TheKricket said:
Yeah - seems like they all have this defect.
Click to expand...
Click to collapse
Is it really all of them? I've been keeping a list of things to look out for once Amazon finally ships my Prime and I didn't think this is an unavoidable issue (as with GPS). Correct me if I'm wrong, please.
same
I am experiencing the same creaking on the right bezel, about 3/4 of the way up. It was not creaking right out of the box, it started after about 5 days of heavy usage. I am not too worried about it at the moment.
( note: this is my first complaint about my tfp, I love my prime.)
I have slight creaking near the volume rocker. its my only gripe with my device. I rarely if ever hear it, but I know its there and it bugs me.
Moothead2 said:
I have it to, but to the right of the charger slot. It seems like a common issue. You have months worth of repair warranty so if it gets worse you can always send it to ASUS and they'll likely repair it.
Click to expand...
Click to collapse
Does this come with the typical, one year warrenty? How do you even get in contact with them for a repair? This is only getting worse I've noticed and I also have 8 dead pixels. I really want a brand new one but doesn't look like any of my Best Buy's around me are going to get them anytime soon. How do I go about getting them to fix it?
Must be more an issue with the 64s. My two 32 models didn't have this issue.
I've tried out 3 Primes (Champagne 32GB, 2X Gray 32GB), and none have had this issue.
wynand32 said:
I've tried out 3 Primes (Champagne 32GB, 2X Gray 32GB), and none have had this issue.
Click to expand...
Click to collapse
I wish mine wasn't as bad as it is. It's to the point where I won't even hold it with my right hand because I'm afraid it'll break it.
Yes - mine creaks too in a few spots.
But it is not that bad....
Mine is on the top left. Feels like the front panel is loose. I emailed asus about it yesterday hopefully they respond soon.
Sent from my evo 3d running ViperROM redline
Not getting this on my Prime, FWIW.

[Q] Dust or dead picel under the screen

There are 2 pieces little spot under screen recently and they are located around center of the screen.
I am not sure if it is dust or dead pixel. It is not totally black but it is kind of grey color and it looks like between screen and LED. One is darker than another. They are not close together. The shape of the spots are not really a pixel square. It is hard to take a photo as it is small.
It was prefect before. And i just found it recently.
Anybody have the same experience?
I would like to change a new one if i cannot fix it myself
Yeah, I have a speck of dust on my screen as well. I can tell that it is dust because it moves slightly when I change viewing angles. I am not bothering with getting it fixed because other than that issue, my tablet works great and I don't want to risk something worse showing up.
I've got one small speck by my recent apps button on screen. I'm using a skinomi skin and sometimes it looks like its between that and the screen and other times it looks like its between the glass and the screen.
Noticed it the first week and havent seen it getting any worse or more collecting.
I also have this. 2 doors of dust or whatever slightly under the very center of screen and in the middle.
I also notice my metal near my port keeps bending in.
I keep debating if I should take it apart and clean it.
Bugs me seeing these two specs.
Doubt Asus would do anything to help us.
Sent from my Galaxy Nexus using xda premium
I have also the same probelm but only one for the moment.
I also have dust but I am afraid that if I RMA that I will get something worse.
It sounds like i am not alone. I am not able to move it...but i would like the way to proof if it is not dead pixel
Any method to clean it or move it to the side? It is kind of bother me everytime when i was reading something on white background.
I have a grey spot about the size of a pixel or two, but I don't think it is a pixel because the edges are not crisp. If it were a pixel I would think it would have well defined edges. I have a dead pixel on my HDTV and it is quite easy to see the edges of that.
It's so small that it doesn't bother me in the least..well apart from knowing my screen isn't perfect.
Also I see no parallax when tilting my screen so if it is dust, it's sitting on the LCD and not the gorilla glass.
I also have that "pixels" in the center of the screen. I see that I am not the only... That's weird. I think it's dead pixel. But I'm not sure... What guys think?
I tested some applications that can wake locked pixels with no success.
Could it be only dust?
abcorp said:
I also have that "pixels" in the center of the screen. I see that I am not the only... That's weird. I think it's dead pixel. But I'm not sure... What guys think?
I tested some applications that can wake locked pixels with no success.
Could it be only dust?
Click to expand...
Click to collapse
Return if you have to option. I had the same problem with my first prime from gamestop. Took it back the next day and had a replacement. Things are great now.
Sent from my Transformer Prime TF201 using xda premium
I think i was one of the first to mention this before regarding any problems with my prime in another thread but yea i chose not to bother returning it and gettin one with bigger problems...its annoying sure but hardly affects usability and performance.
I'm OCD and my Prime I had gotten from Best Buy had some dead pixels, then another one I had gotten had a dead pixel AND a piece of dust or something under the screen... I ended up finally getting a good one w/o any problems so far. *crosses fingers*
MasterZen88 said:
Return if you have to option. I had the same problem with my first prime from gamestop. Took it back the next day and had a replacement. Things are great now.
Sent from my Transformer Prime TF201 using xda premium[/QUOTE
It already pass the return Window... Does the warranty covers this kind of problem?
Click to expand...
Click to collapse

Nexus 10 with different screens.

I ordered a replacement N10, because of back flex and got it today.
Not only is the back flex worse, the screen looks worse. Compared to my original N10 the replacement looks duller. My original N10 by far looks more vibrant while the replacement has a noticeable warmer and duller color temp.
Back the replacement goes... I will live with the back flex. I really don't want to play exchange roulette like I did with the nexus 7. Those of you considering exchanging your Nexus might want to consider you might get a worse one.
BamAlmighty said:
I ordered a replacement N10, because of back flex and got it today.
Not only is the back flex worse, the screen looks worse. Compared to my original N10 the replacement looks duller. My original N10 by far looks more vibrant while the replacement has a noticeable warmer and duller color temp.
Back the replacement goes... I will live with the back flex. I really don't want to play exchange roulette like I did with the nexus 7. Those of you considering exchanging your Nexus might want to consider you might get a worse one.
Click to expand...
Click to collapse
Samsung's the single source for the LCD panel. If there are big variations between them it's because the tolerances on the production line are off and their slipping through QC. Some deviation from panel-to-panel is normal. If you put three SGS3's side-by-side each will have a slight variation in temperature. But what you're describing doesn't sound slight.
BamAlmighty said:
I ordered a replacement N10, because of back flex and got it today.
Not only is the back flex worse, the screen looks worse. Compared to my original N10 the replacement looks duller. My original N10 by far looks more vibrant while the replacement has a noticeable warmer and duller color temp.
Back the replacement goes... I will live with the back flex. I really don't want to play exchange roulette like I did with the nexus 7. Those of you considering exchanging your Nexus might want to consider you might get a worse one.
Click to expand...
Click to collapse
I think I had a similar issue to you, but for the better.
My replacement arrived yesterday as my original device had bad back flexing
The new one has a much more vibrant and brighter screen than the old one (the autobrightness seems to react much faster and ramps the brightness more appropriately)
The replacement came shipped with build JVP15L, so I had to two updates, one to JOP20C and then again to JOP20D, weird huh?
Sent from my HTC Desire S using xda premium
so your telling me you got two devices without light bleed? I can't even get one out of them.
This is somewhat good news as I seem to have a warmer screen and also suffer from light bleed so I'm probably going to get it exchanged. Hoping I get a replacement with a neutral or cooler screen. neutral or cooler toned screens tend to have better contrast for some reason vs the warmer screens.
Sent from my Transformer Prime TF201 using Tapatalk 2
tcb4 said:
so your telling me you got two devices without light bleed? I can't even get one out of them.
Click to expand...
Click to collapse
Yeah my first device had quite severe bleed in 3 corners, but my replacement has ever the slightest amount in the bottom corner, but its really not noticeable, even on a black background, so I'm gonna keep this one
Sent from my Nexus 10 using Tapatalk HD
tcb4 said:
so your telling me you got two devices without light bleed? I can't even get one out of them.
Click to expand...
Click to collapse
First unit which I kept has very little light bleed, nothing significant. The replacement had horrible light bleed, there were light streaks coming from the lower right corner.
Other than back flex, I am happy with my N10's screen.
I thought the same about my device but then I turned my brightness up and took it off automatic brightness. I can hardly believe that the difference is that stark between the two units
Sent from my Nexus 10 using Tapatalk 2
Back flex????
Sent from my Nexus 10 using xda app-developers app
muyoso said:
Back flex????
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Yeah if you push hard enough on the back of your device it will dimple inward. I can't really see in my mind why this is considered even remotely a functional defect lol. This just in: plastic flexes when you push on it
Sent from my Nexus 10 using Tapatalk 2
TheEmpyre said:
Yeah if you push hard enough on the back of your device it will dimple inward. I can't really see in my mind why this is considered even remotely a functional defect lol. This just in: plastic flexes when you push on it
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
It is considered a defect because normally the internal components should touch the inside of the casing, so there is no cavity between the two and therefore no flexing when pressed .
In the case of the flexing units, the casing is bowed ever so slightly outwards, thus creating a cavity, so the casing flexes inwards up until it touches the components inside.
Sent from my Nexus 10 using Tapatalk HD
Hereisphilly said:
It is considered a defect because normally the internal components should touch the inside of the casing, so there is no cavity between the two and therefore no flexing when pressed .
In the case of the flexing units, the casing is bowed ever so slightly outwards, thus creating a cavity, so the casing flexes inwards up until it touches the components inside.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Is it actually a "bow" or is it just an air gap between the battery and the back? Mine flexes when I press it, and makes a "click" like glue forcibly coming unstuck when I release.
It's hardly the end of the world though. I'd never have realised it until it was mentioned on XDA because I'm not heavy handed enough to go squeezing it, nor would I have had cause to "press" hard on the back of it while it's lying face down.
alias_neo said:
Is it actually a "bow" or is it just an air gap between the battery and the back? Mine flexes when I press it, and makes a "click" like glue forcibly coming unstuck when I release.
It's hardly the end of the world though. I'd never have realised it until it was mentioned on XDA because I'm not heavy handed enough to go squeezing it, nor would I have had cause to "press" hard on the back of it while it's lying face down.
Click to expand...
Click to collapse
Mine was both, a bowing which caused an air gap. It didn't click at all, just flexed even when i was just holding it as the bowing was greatest directly underneath where you place your fingers. If i looked edge onto the tablet from the top, the bowing was apparent.
Figured seeing as i'm paying for it, wanted a perfect device and Google were happy to replace it, why not get it replaced?
Hereisphilly said:
Mine was both, a bowing which caused an air gap. It didn't click at all, just flexed even when i was just holding it as the bowing was greatest directly underneath where you place your fingers. If i looked edge onto the tablet from the top, the bowing was apparent.
Figured seeing as i'm paying for it, wanted a perfect device and Google were happy to replace it, why not get it replaced?
Click to expand...
Click to collapse
Indeed, why not. I would have done the same thing.
joke
Now all of you shut up, before I go poking around mine any more and realise I'm not happy with it and end up sending it back for replacement :laugh:
/joke
I feel bad for you people searching for the perfect device. Chances are, the people on their 3-4-5th return are never going to be satisfied, and the devices they returned would most likely have been perfect for someone else. Having OCD about a mechanically flawless techno-gadget is like a Heroin addict chasing the dragon.
Sent from my Nexus 7 using Tapatalk 2
TheEmpyre said:
Yeah if you push hard enough on the back of your device it will dimple inward. I can't really see in my mind why this is considered even remotely a functional defect lol. This just in: plastic flexes when you push on it
Click to expand...
Click to collapse
Shocking news. This flex thing is like that old joke -
Patient: Doc, it hurts when I do this. (Patient flexes a joint.)
Doctor: Then don't do that.
Semantics said:
I feel bad for you people searching for the perfect device. Chances are, the people on their 3-4-5th return are never going to be satisfied, and the devices they returned would most likely have been perfect for someone else. Having OCD about a mechanically flawless techno-gadget is like a Heroin addict chasing the dragon.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I wonder how much cheaper our gadgets would be if hordes of people on XDA didn't RMA 5-6 times because they go actively looking for defects they wouldn't notice otherwise?
I've been thinking about this all day. My N10 has some ripples around the detachable rear cover that I hadn't noticed until looking at the photos in this thread. Is it obvious when I show it to others? No. Does it affect operation in any way? No. Have my fingers ever felt the ripples as I use it or rotate viewing mode? No.
So why are the cosmetics such a big deal to some and not others? Obiously some rate the appearance of the device to be more important than what it does. I know I'm going to get flamed big-time for this, but worship of form over function seems to be a common trait of the Apple crowd. I truly appreciate beauty, but not so much in a tool. I used an iPad for a year and always felt like I was using a fine watch: attractive, but not adaptable to what I wanted to do. Those of us that value function more will probably never understand the other way of thinking.
tcb4 said:
so your telling me you got two devices without light bleed? I can't even get one out of them.
Click to expand...
Click to collapse
Mine has ZERO light bleed and I know all about that. I use to own 3 Infinity's and that's because the first two had intolerable light bleed the third I just lived with.
I'm guessing google sacrificed build quality so they could keep prices down -- Dont really understand why it is important for your device to "look" cool when the purpose of the device is media consumption / productivity. Besides, I would bet upwards of 60% of consumers get a case for their device...whats the point of that back-flex when you have a hard shell case?

Nexus 10 back loose/ creaky?

Hi guys,
My Nexus 10's back, on the left side when facing the screen, has a slight creak to it when pressed. Does anybody else's have this (it can be slightly hard to find at first)? I'm curious, as I'm not sure if there is a DIY way to fix it, and whether or not it is a common occurrence.
I get a click or two from the removable strip but I assume that is just it moving in its seating. Very minor and not a problem. I ignore it.
Yeah, I have that, too. Nothing seems to indicate that the cover is loose somehow, though. Seems to me that it's just the rubber. I wouldn't worry about it. Of course, I wouldn't go choking it there, either.
Sent from my Nexus 10 using XDA Premium HD app
I too get a "Crack Sound" or creak when I grab my tablet from the left side.
Mine is same although my removable strip actually has a probg yhat won't go it so it juts out... Very annoying but I have a case.
So, besides the creaking sound (which doesn't bother me too much), my back actually has two "bubbles" where the back material meets the dimpled strip, and when you look at the tablet top-down, you can actually see the two gaps where the rubbery material is lifted up higher than the dimpled strip. The "bubbles" are basically directly above the "N" and "S"...
I'm assuming this isn't normal and should probably go get an exchange at the store, right?
Sent from my Nexus 10 using xda premium
My left rear has a little more give than the right. Otherwise, the build is clean and sturdy. Did hear a noise once when i was gripping it at a funny angle. Of course if I grip my Vivid wrong the rear plate falls off and the battery even drops out at times. Overall I am very happy with the construction of my nexus10.
like this?
http://forum.xda-developers.com/showthread.php?t=1998388
I got my N10 yesterday and I found two problems.
1. The back is really loos. If I press in the middle of the back cover it wobbles and make click sound.
2. There is some light bleeding at the bottom right corner of the screen.
Are these things normal? Or should I exchange it.
shahidhussain said:
I got my N10 yesterday and I found two problems.
1. The back is really loos. If I press in the middle of the back cover it wobbles and make click sound.
2. There is some light bleeding at the bottom right corner of the screen.
Are these things normal? Or should I exchange it.
Click to expand...
Click to collapse
The back is fine. As far as light bleed, it's a common problem. How bad it is depends on how much it bothers you.
Sent from my EVO using XDA Premium HD app
falconoble said:
The back is fine. As far as light bleed, it's a common problem. How bad it is depends on how much it bothers you.
Sent from my EVO using XDA Premium HD app
Click to expand...
Click to collapse
I got exchange.
i get some slight play in the back but compared to the note 10.1, this thing is build like a rock
I received my Nexus 10 at the end of January and have just ordered a replacement...
The creaking and cracking from both sides of the back (directly behind the speakers) is horrendous when I gently squeeze the nexus, for example to lift it - I can usually just ignore these little things, but this is just too bad!
I have a Galaxy Nexus and I love it...the build quality is superb and the fact the Nexus 10 isn't up to the same standard is disappointing.
I will upload a YouTube video to demonstrate it...as I've not seen or heard anyone having creaking this bad...
When I receive my replacement, I'll update this topic. The only saving grace was the Google RMA process was flawless IMO.
CASES
I used to get it too but i figured out a way to fix it. Wanna know how? lol Get a nice smart case by Poetic or another brand you prefer. I know theres a thread designated for all the accessories for nexus 10.
but check out this website and pick what you like. - nexus 10 accessories . com

Is lightbleed still a problem?

So I'm asking this because I'm planning on returning my nexus 9 tomorrow and getting a replacement, because I have the following
Light bleed
Terrible battery life ( Max of 5 hours SOC )
crappy buttons on the side
The back creaks slightly
Is it worth returning or do you think I'll get the same issues again or maybe worse?
J
Sent from my Nexus 9 using XDA Free mobile app
JackHanAnLG said:
So I'm asking this because I'm planning on returning my nexus 9 tomorrow and getting a replacement, because I have the following
Light bleed
Terrible battery life ( Max of 5 hours SOC )
crappy buttons on the side
The back creaks slightly
Is it worth returning or do you think I'll get the same issues again or maybe worse?
J
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I suggest you to wait. As far as I know it's a matter of luck of getting a device with none of the known defects. Older and younger builds do have defects.
Sent from my Nexus 9
Although I brought my mine in December, I guess I got a crappy unit
Sent from my Nexus 9 using XDA Free mobile app
JackHanAnLG said:
Light bleed
Click to expand...
Click to collapse
LOL, characteristic of LCD. Get used to it -- they ALL do it. If you don't like it, your ONLY option is LED.
Terrible battery life ( Max of 5 hours SOC )
Click to expand...
Click to collapse
Turn down the brightness. Its a big screen, the brighter its set, the less the life. And 5 hours screen on is HUGE.
crappy buttons on the side
Click to expand...
Click to collapse
I quite like the buttons on these things, bit harder to press so you have to really mean it. Nexus 7 is a problem because it is too easy to accidentally bump the buttons.
The back creaks slightly
Click to expand...
Click to collapse
So quit twisting it.
Is it worth returning or do you think I'll get the same issues again or maybe worse?
Click to expand...
Click to collapse
Definitely not worth returning. All you do by returning, is make the next version more expensive for the rest of us by costing HTC and Google for your pointless warranty claim.
I did return it and got a decent unit
J
Sent from my Nexus 9 using XDA Free mobile app
doitright said:
LOL, characteristic of LCD. Get used to it -- they ALL do it. If you don't like it, your ONLY option is LED.
Turn down the brightness. Its a big screen, the brighter its set, the less the life. And 5 hours screen on is HUGE.
I quite like the buttons on these things, bit harder to press so you have to really mean it. Nexus 7 is a problem because it is too easy to accidentally bump the buttons.
So quit twisting it.
Definitely not worth returning. All you do by returning, is make the next version more expensive for the rest of us by costing HTC and Google for your pointless warranty claim.
Click to expand...
Click to collapse
Are you ****ing kidding me here? Ya let's let ALL these issues go, so the NEXT tablet that comes out is an even bigger piece of **** with more problems because people like you let them get away with it.
Let me ask you this, should we accept ALL light bleed as OK no matter how bad, or is there a cutoff at some point where its no longer acceptable? Right off the bat I'll tell you youre wrong because they don't ALL do it. I just returned a nexus 9 that had next to 0 light bleed. I've never, not once in my life exchanged a device for any reason. Never. But im on my 4th nexus 9, 2 of which had almost no light bleed at all. My last ones screen flickered so bad and the speakers froze and cut in and out so much I couldn't deal with it anymore, which was number 2 nexus 9. Open the new one tonight in the parking lot and boot it. Horrendous lightbleed and volume buttons that were literally ****ing recessed into the frame. I don't know about you, but I'm not a god damn woman so I don't have fingernails to reach a recessed button, and I for damn sure ain't carrying around a ****ing paperclip to adjust the volume on a tablet. So I exchange it. Get nexus 9 #4. Buttons stick out of frame perfectly. Completely different from the one i just had in my hands. But that's not a quality control issue to you. I should have kept the one that had unpressable volume buttons so you won't have to pay more for your next tablet. Too ****ing bad buddy. I'll return EVERY single piece of **** I get, and GLADY pay more for the next version if I don't need a paper clip to adjust the volume, Dramamine for the constant screen flicker, and a speaker that actually plays sound.
Yes or no is this acceptable light bleed?
And if I sounded pissy in that post, its because on nexus #4 I just noticed the entire upper left hand side of my screen is completely ****ing yellow/brown, it looks like absolute ****. So even this one has bad light bleed when the screen is dark, and when the screen is light, 1/4 of it is piss yellow. This tablet came from the store today, so much for issues being fixed.
di11igaf said:
And if I sounded pissy in that post, its because on nexus #4 I just noticed the entire upper left hand side of my screen is completely ****ing yellow/brown, it looks like absolute ****. So even this one has bad light bleed when the screen is dark, and when the screen is light, 1/4 of it is piss yellow. This tablet came from the store today, so much for issues being fixed.
Click to expand...
Click to collapse
I've got the same thing. Plus, the microphone seems to have issues (sensitivity is so low, that it won't hear any "okay google" unless i really scream at it, for instance)! I would return it, but i am too afraid i might get an even worse unit.
Turns out HTC and Google really messed everything up with this one. I guess i was lucky to end up with a yellow-tinted Nexus 9 because, according to all people's reports, that might just be the best hardware version of it! With that in mind, I've never been so unsatisfied about a purchase before. I've always accepted some minor issues as i don't believe there are perfect devices, but i've never heard about so many different and major issues, especially for a tablet of this price. Not even to mention about the software issues, so far. This is just rediculous!
Huh ...
My new Sand model arrived with no issues out of the box ... excellent build quality, no issues with colors in the screen, and no bleeding backlight.
Where are y'all buying these things with all these issues?
I ordered mine directly off the play store.
I bought mine from Expansys (Europe). It's a pretty late batch (HTC4CC, which I think means December) therefore no back bending, no deep volume buttons and normal lightbleed for an LCD. But the fact that there are still issues and the quality of such an expensive tablet is questionable enough to make you stick with a yellowish screen, is really depressing. Anyway, I am really glad yours is perfect and I hope next batches manage to be as good as this tablet should be, but that doesn't change the fact that HTC and Google really dropped the ball on this one.
di11igaf said:
And if I sounded pissy in that post, its because on nexus #4 I just noticed the entire upper left hand side of my screen is completely ****ing yellow/brown, it looks like absolute ****. So even this one has bad light bleed when the screen is dark, and when the screen is light, 1/4 of it is piss yellow. This tablet came from the store today, so much for issues being fixed.
Click to expand...
Click to collapse
Your image is designed to exaggerate a non-problem into a problem.
Dark ambient = long exposure.
Also your picture isn't taken straight on. Its at an angle with the "bad" corner closest to the camera.
doitright said:
Your image is designed to exaggerate a non-problem into a problem.
Dark ambient = long exposure.
Also your picture isn't taken straight on. Its at an angle with the "bad" corner closest to the camera.
Click to expand...
Click to collapse
OK, so you're telling ME, the one who had the tablet in front of my face it didn't have light bleed and I purposefully 'designed' this picture to exaggerate a problem? Here's the bottom line and I could not give 2 flying ****s what you think I did or didn't do. My tablet had horrible HORRIBLE light bleed. How it looks in that picture is pretty damn close to how it looked in person while in a dark room. Period, end of story. You can check my post history going back to 2010 and see how many times I've complained about devices or *****ed about light bleed. Good luck finding any.
Im a member here to gain knowledge and help people when i can. I have enough devices to damn near fill a small bathtub, and theyre all the the same ones i bought day one never exchanged. In case you werent aware, most of us here are not ****ing retards and know lcds will have a SMALL amount of light bleed.. This is not a small amount, its an unacceptable amount. If You think I'm suddenly trying make **** up or make unwarranted complaints about a screen for no reason, you're flat out wrong.
For someone with the name doitright, you for damn sure aren't holding HTC to that standard.
So if take a picture of all my older tablets next to the nexus 9, they should all basically look the same then correct? By your logic they should all look similiar(according to you, this is a normal, acceptable amount that should be exhibited by all of my older tablets- including 2 nexus 7's) and the nexus 9 should look no worse than the rest correct? 100$ says they don't. Willing to put your money where your mouth is?
di11igaf said:
OK, so you're telling ME, the one who had the tablet in front of my face it didn't have light bleed and I purposefully 'designed' this picture to exaggerate a problem? Here's the bottom line and I could not give 2 flying ****s what you think I did or didn't do. My tablet had horrible HORRIBLE light bleed. How it looks in that picture is pretty damn close to how it looked in person while in a dark room. Period, end of story. You can check my post history going back to 2010 and see how many times I've complained about devices or *****ed about light bleed. Good luck finding any.
Click to expand...
Click to collapse
No, what I'm saying is that you are too picky and expecting something unreasonable from your hardware, which is working perfectly well. People like you who repeatedly send your hardware back under warranty for imaginary "problems" that are perfectly within the design specifications of the device **AND NOT EVEN CORRECTED** by the warranty replacement, cause the price of hardware to increase for the rest of us, because the cost of that warranty replacement is distributed to EVERYONE who buys that hardware.
I suggest that you return it and buy yourself a ROCK AND A CHISEL. At least if you complain about that, it won't increase the price for the rest of us.
doitright said:
No, what I'm saying is that you are too picky and expecting something unreasonable from your hardware, which is working perfectly well. People like you who repeatedly send your hardware back under warranty for imaginary "problems" that are perfectly within the design specifications of the device **AND NOT EVEN CORRECTED** by the warranty replacement, cause the price of hardware to increase for the rest of us, because the cost of that warranty replacement is distributed to EVERYONE who buys that hardware.
I suggest that you return it and buy yourself a ROCK AND A CHISEL. At least if you complain about that, it won't increase the price for the rest of us.
Click to expand...
Click to collapse
Are you a ****ing moron? Let's try reading shall we?
1) I just said in the post you quoted I've NEVER in my life exchanged or returned any devices out of literally dozens. Obviously besides the nexus 9, but since you don't seem to fully read my previous comments in this thread I feel I need to point this out.
2) I haven't warrantied ONE nexus 9. I bought mine from best buy after launch and had until Jan 15 to exchange. So I did. If you actually READ my posts you'll see each one was returned for multiple issues, light bleed being at the back of my list of issues that concern me.
Would you keep a device that had speakers that didn't work? Yes or no? Would you keep a device that had volume buttons LITERALLY recessed inside the frame, making them completely unable to be pressed? Yes or no? Light bleed just happened to be another issue to top these major defects off.
So, since all these problems HAVE been noted in this thread, in fact I'm pretty sure they were in posts you quoted me on, you're telling me non-working speakers and unpressable buttons are both imaginary and within design specs?
Throw horrendous light bleed on top for icing on the cake.

Categories

Resources