Well I've just noticed the right side of my tablet has a creak to it. Seems a little loose and am not sure what to do. Am I correct in assuming that the creaking will just get worse in time and potentially come apart completely? Anyone else experiencing this?
Not sure what to do. I've got until Jan. 24th to return it to Best Buy but other than this issue, I love this thing and don't want to get rid of it since the chances of getting a replacement are extremely slim.
I have seen several people comment about the right side seems loose. The bottom right area in the black trim area has a little noise and creak in it when tapped or pressed on mine. My middle left screen area has a little clunk in it when tapped like the glass has a slight gap between in and the screen behind.
I have considered returning mine also because of this but if it is normal, I don't want to since I may get one that is worse. Everything else works fine with mine.
Mine Loose Too
Just got my gray prime 64 yesterday and I did notice the right side of the screen seems loose and protrudes up further than the rest of the display. It almost seems like there might be something too bulky below it preventing it from laying flat.
I have it to, but to the right of the charger slot. It seems like a common issue. You have months worth of repair warranty so if it gets worse you can always send it to ASUS and they'll likely repair it.
Moothead2 said:
I have it to, but to the right of the charger slot. It seems like a common issue. You have months worth of repair warranty so if it gets worse you can always send it to ASUS and they'll likely repair it.
Click to expand...
Click to collapse
Yeah - seems like they all have this defect.
Mine is on the upper left were the volume rocker is. Gets a little annoying.
Sent from my Transformer Prime TF201 using Tapatalk
TheKricket said:
Yeah - seems like they all have this defect.
Click to expand...
Click to collapse
Is it really all of them? I've been keeping a list of things to look out for once Amazon finally ships my Prime and I didn't think this is an unavoidable issue (as with GPS). Correct me if I'm wrong, please.
same
I am experiencing the same creaking on the right bezel, about 3/4 of the way up. It was not creaking right out of the box, it started after about 5 days of heavy usage. I am not too worried about it at the moment.
( note: this is my first complaint about my tfp, I love my prime.)
I have slight creaking near the volume rocker. its my only gripe with my device. I rarely if ever hear it, but I know its there and it bugs me.
Moothead2 said:
I have it to, but to the right of the charger slot. It seems like a common issue. You have months worth of repair warranty so if it gets worse you can always send it to ASUS and they'll likely repair it.
Click to expand...
Click to collapse
Does this come with the typical, one year warrenty? How do you even get in contact with them for a repair? This is only getting worse I've noticed and I also have 8 dead pixels. I really want a brand new one but doesn't look like any of my Best Buy's around me are going to get them anytime soon. How do I go about getting them to fix it?
Must be more an issue with the 64s. My two 32 models didn't have this issue.
I've tried out 3 Primes (Champagne 32GB, 2X Gray 32GB), and none have had this issue.
wynand32 said:
I've tried out 3 Primes (Champagne 32GB, 2X Gray 32GB), and none have had this issue.
Click to expand...
Click to collapse
I wish mine wasn't as bad as it is. It's to the point where I won't even hold it with my right hand because I'm afraid it'll break it.
Yes - mine creaks too in a few spots.
But it is not that bad....
Mine is on the top left. Feels like the front panel is loose. I emailed asus about it yesterday hopefully they respond soon.
Sent from my evo 3d running ViperROM redline
Not getting this on my Prime, FWIW.
Related
I was wondering if it is worth sending the touchpad in for light bleed. My upper left hand corner bleeds bad enough that any dark scene, item, picture it shows up. HP said they will do advanced replacement for it for this issue. However, not sure I want to toy around with getting a different unit with a different issue.
How common is light bleed on these and how severe is bad enough to get it repaired?
Mine has rather visible bleed. I won't get it repaired since TP has no service support in my country.
I would personally get it fixed since they will fix it free under warranty. That said, you don't really have to do it now if you don't want to, you could wait until after you have had it longer and get closer to the end of the one year warranty.
Aren't people STILL complaining about this with the iPad 2? Mine has some bleed, but I figure it just isn't worth the fuss for only a marginally better unit.
Is this a common problem or did I just get unlucky.
Mine had light bleed, I talked to HP, they said they will fix it, I sent it off Monday and got an email yesterday saying they were shipping my replacement back, which is cool I guess
Sent from my PG86100 using XDA Premium App
I will be curious what the results are. I wish my bleed didn't bother me.
Does anyone know if you do advanced replacement if you can keep which ever one you like better. I only ask because I could have them send me one, then try it and if it is not better send it back instead of my other one.
mine has light bleed too.
mine has some as well
my replacement was just delivered, however im stuck at work until 4pm, i'll update later if it doesnt get stolen off my front porch lol
phonetec said:
my replacement was just delivered, however im stuck at work until 4pm, i'll update later if it doesnt get stolen off my front porch lol
Click to expand...
Click to collapse
or a video of it being tossed on the porch hehe
So I got it, still has light bleed in the same spot......however the cracks are no longer present by the speakers, I don't know if I should contact HP again or just deal with it, it kinda sucked being without it for almost a week
How bad is the bleed. I mean mine is very visible even at 50% with anything dark in that corner.
Xarick said:
How bad is the bleed. I mean mine is very visible even at 50% with anything dark in that corner.
Click to expand...
Click to collapse
I would say the same, it's very noticeable to me, really bothers me now
I am thinking I will give advance replacement a whirl. well.. nm.. just called and advanced replacement program has been canceled.
Kind of strange to describe but here goes.
If you press the left side of the screen (horizontal under Asus logo) you can feel a click as the screen moves in even when not pushing hard. It is like the layers have separated, it's only the left side.
For example if I tap the left side, you can hear and feel it making contact (not my finger, if you make contact and press you can hear it clicking). I'm wondering if it is a fault and on its way out or something many of you have? It isn't right because it never used to do it.
I have cover from the store it was purchased at that covers accidental damage, just not theft. So if needs be I will bounce it off the way to get it replaced. But has anyone else had this?
Yep, screen separation. Mine started doing the same thing. Then one of the OTA updates bricked it so I had to RMA it anyway. I figure it will only get worse so your probably better off getting a new one. You'll probably get a replacement before I get mine back from RMA. Kind of worried about how the repair will turn out too.
Mcnia said:
Yep, screen separation. Mine started doing the same thing. Then one of the OTA updates bricked it so I had to RMA it anyway. I figure it will only get worse so your probably better off getting a new one. You'll probably get a replacement before I get mine back from RMA. Kind of worried about how the repair will turn out too.
Click to expand...
Click to collapse
Thanks,
I knew it isn't normal, but I just can't be bothered returning it. But I guess I should, the first Asus product I've ever had a problem with, shame.
I was just wondering if anybody else has an issue with loose glass panel towards the edges of your asus transformer prime? In particular folks who just purchased one. There is about a 1/4" of play mostly at the top/left side of the screen around the volume rocker and to a lesser extent on the right side. It's not a lot, but noticable since that's right where you normally hold it.
I already exchanged it for another one at Office Depot, and this new one has the exact same issue. I can't imagine this would be "normal." Maybe just a defective batch? In either case, I haven't noticed any other issues in the 2 days I had the first one.
They both started with S/N# C30KAS...
C1O from office depot reporting in. Have the exact same issue, right out of the box. My case does make it unnoticeable, though. I'd hate to have to rma it for this.
It is not normal. There are little hatches which hold glass to the frame. If they are broken (they are very thin, I guess they can easily be broken on assembly line) there is no way to fix it apart from taking it apart completely and putting some double sided tape. I would, and did, return it.
Sent from my HTC Sensation Z710e using xda premium
omegafiler said:
There is about a 1/4" of play mostly at the top/left side of the screen around the volume rocker
Click to expand...
Click to collapse
Do you realize how much that is? (I assume you mean a quarter inch)
I would just return it.
Yes, it's about a quarter inch. Unfortunately it seems as though these 2 were the last in stock... anywhere. But that's kind of what I thought; just seemed odd to have 2 in a row like that. I guess I'll play with it for a few more days to make sure I still like the TF201 in general and return it later (within the return window). Or maybe if they get a new batch in... exchange it again.
I like to see a picture of this. Quarter inch is really massive.
htcplussony said:
I like to see a picture of this. Quarter inch is really massive.
Click to expand...
Click to collapse
Yeah, it wasn't good, but it's returned now. Although this 2nd one isn't nearly as bad. In fact, it's only loose on the right side. This is probably closer to an 1/8". So it's doesn't go above the outter bezel.
But I guess the question is whether folks consider any play whatsoever acceptable, normal, or something they even care about. In particular if it's in a case. Not to mention the concern that it might get worse or seperate completely.
omegafiler said:
Yeah, it wasn't good, but it's returned now. Although this 2nd one isn't nearly as bad. In fact, it's only loose on the right side. This is probably closer to an 1/8". So it's doesn't go above the outter bezel.
But I guess the question is whether folks consider any play whatsoever acceptable, normal, or something they even care about. In particular if it's in a case. Not to mention the concern that it might get worse or seperate completely.
Click to expand...
Click to collapse
On a good unit there is no play. Actually, there is, but it's so small that you have to be looking for it and even then you'd struggle to find it.
Sent from my HTC Sensation Z710e using xda premium
Had it on a C0 along with light bleed and lint inside the glass...return it 2 days later. Talk about QC...
Sent from my GT-I9100 using XDA
Hmm, maybe I'm just being more picky given the much worse amount of seperation I had with the first device. So here is a quick video I just shot with my phone. Not the best quality, but maybe you guys with "good" primes can let me know what ya think.
Edit: Embed didn't work, so here is the private link.
http://youtu.be/xV6IE16Dj2o?hd=1
I'm having the exact same problem, mine also makes an audible "squeek" when pressed, and the compression is definitely visible. The difference though is that mine came back repaired from when I sent it out for RMA, not a replacement. I'll be getting on the phone tonight with them, as the screen is now also starting to display Mura (which it was sent in for the first time I RMA'd it.), and the screen bleed is getting notibly worse to the point where it is very annoying.
mine is also loose in the upper left hand corner area when held in landscape.
On mine there's still lots of areas I can press down but its under 1mm.
I'm more bummed about dust I now see under the screen. Doesn't Apple laminate the lcd to the screen? Wish Asus done it.
i have the same issue. My wife noticed it and I decided that I could live with it.
Sent from my Transformer Prime TF201 using XDA
To me, this is not a defect. It's definitely an imperfection, but it's not a defect.
goodintentions said:
To me, this is not a defect. It's definitely an imperfection, but it's not a defect.
Click to expand...
Click to collapse
I see it kinda the same way... I only notice it from time to time in landscape mode. But sometimes I have to test the whole side to find the spot again.
I'm having a really great time with the device, can't think about returning it for for this imperfection.
I've got the same problem albeit the flex is very small.
Well, I decided to at least order a MoKo folio cover case and see if that minor flex is still going to be an issue for me or not. I already don't like the way it feels carrying it around by itself. The edges make it feel somewhat awkward and uncomfortable. So maybe the case is all it needs. Because other than that, I haven't found any other issues, yet.
picked up my phone earlier this afternoon, (preorder 32gb) 1st im told that my wireless hdmi will arrive at a later date, when i open up my box once im home i see that the top speaker grill did not adhere properly. only half of it is sitting right (camera side) but the half with the sensors is floating ever-so slightly. i am in love with the phone but this is really bothering me. i can clearly see the red adhesive and some is even on the side of the phone. after a quick phone call to at&t i was told i can go back to the store i which i pre-ordered and recieve a new phone.
picture with the headphone port shows a normal adhered corner and the other shows the gap on the grill
Has anyone else had a problem like this?
so take it back get it replaced
ofcourseimnaked said:
picked up my phone earlier this afternoon, (preorder 32gb) 1st im told that my wireless hdmi will arrive at a later date, when i open up my box once im home i see that the top speaker grill did not adhere properly. only half of it is sitting right (camera side) but the half with the sensors is floating ever-so slightly. i am in love with the phone but this is really bothering me. i can clearly see the red adhesive and some is even on the side of the phone. after a quick phone call to at&t i was told i can go back to the store i which i pre-ordered and recieve a new phone.
picture with the headphone port shows a normal adhered corner and the other shows the gap on the grill
Has anyone else had a problem like this?
Click to expand...
Click to collapse
Very similar to mine but not quite as bad as what your pic shows. I decided not do anything because it is purely a cosmetic issue and you have to look really hard on mine to see it plus all my parts are aligned spot on so everything is flush with no over hang. If I had yours I would take it back to the store and demand another 32 GB asap. They should have em. 64 GB will take some time to reach stores so I may decide later to exchange.
You have a one year warranty so you could wait too. Remember iPhone 5 had similar quality issues at launch.
Lol, I'm just waiting for mine to come in. I presume I will get one that has a perfect body, but a dead pixel or two, I will then return it for one with a flawless screen, but screwed up body, and then be forced to live with it.
I went to a store to buy mine and made them open the box before I took it
Sent from my M7 using Tapatalk 2
ofcourseimnaked said:
picked up my phone earlier this afternoon, (preorder 32gb) 1st im told that my wireless hdmi will arrive at a later date, when i open up my box once im home i see that the top speaker grill did not adhere properly. only half of it is sitting right (camera side) but the half with the sensors is floating ever-so slightly. i am in love with the phone but this is really bothering me. i can clearly see the red adhesive and some is even on the side of the phone. after a quick phone call to at&t i was told i can go back to the store i which i pre-ordered and recieve a new phone.
picture with the headphone port shows a normal adhered corner and the other shows the gap on the grill
Has anyone else had a problem like this?
Click to expand...
Click to collapse
mine has a very slight gap, similar to yours on the right side, except mine is more uniform. I think it's the fact that it's glued on. personally I'm not worried, but yeah if it bothers you go demand another one. they promised you zero gap construction, if you don't thin theyve met that promise you go back till you get one that does bro.
Guys, anyone has dead pixels on their Ones? Got them on two of mine....any idea how many considered defective by HTCs standards?
Sent from my HTC One X+ using Tapatalk 2
I called AT&T and they told me to go to my nearest store and they would replace it, even if it were a minor cosmetic defect it would still worry me. Even the slightest bit of water could go in through a gap like that and damage anything or even worse activate a water strip forcing you to go through Insurance for such a new phone. They were pleasant and accommodating over the phone, I'm glad it was an easy fix.....
Now I'm just sitting here staring at the phone, it makes no sense to do anything software wise to it because I'm going to return it in the morning..... No fun for me today
Dottcent said:
Guys, anyone has dead pixels on their Ones? Got them on two of mine....any idea how many considered defective by HTCs standards?
Click to expand...
Click to collapse
Not sure about HTC but AT&T will exchange it for you..
Dead pixels is a definite return in my book.
Wow!!I was wondering it's only me or a wide spred issue. Now I know it's not just me. My phone looks perfect at the top but the bottom has imperfections. There is a very slight gap and I can feel the ups and downs when I move my finger around the edges. I think I should go to AT&T sore and see if the replace it.
Dottcent said:
Guys, anyone has dead pixels on their Ones? Got them on two of mine....any idea how many considered defective by HTCs standards?
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
I had the same issue with mine, and the store manager said he would only exchange it if it had three dead pixals. The phone had about five dead pixals but in two different clusters which made it seem like only two pixals, due to the high dpi. The store manager than called att and asked what he should do because he was only able to see two dead spots/pixals. They probably told him it was up to him and that the defective pixals should be clearly seen with the naked eye. He refused to exchange it because he felt uncomfortable not being able to see more than two dead spots/pixals. I tried a different store with much success. Probably because the store manager was so understanding of the issue.
I went to the store and replaced mine. The first one they showed me has the same issue (uneven flow of construction with the bottom speaker top) and pulled another one which still suffers with similar issue but not that evident. I took the second one and left. It looks like the bottom part of the phone is little complex and very wide spread build issue with these phones.
rajbsn said:
I went to the store and replaced mine. The first one they showed me has the same issue (uneven flow of construction with the bottom speaker top) and pulled another one which still suffers with similar issue but not that evident. I took the second one and left. It looks like the bottom part of the phone is little complex and very wide spread build issue with these phones.
Click to expand...
Click to collapse
I've looked at many phones. I have yet to seen one without the small gap. It seems that only some have smaller gaps than others. But make sure your speaker grills are at least align correctly.
Sent from my HTC One using Tapatalk 2
Dreadsteel said:
I've looked at many phones. I have yet to seen one without the small gap. It seems that only some have smaller gaps than others. But make sure your speaker grills are at least align correctly.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Their Display phone was perfect. It looks like they are displaying Apples and selling Oranges.
hey i was finally able to recieve a new phone, i walked into my local at&t and spoke to a rep. i was reffered to the assitant manager who looked at his own phone and refused me a replacement phone. i pressed him and gave my phone to the store manager who only agreed to give me a new unit once she saw the red adhesive showing on my top speaker grill. i went and looked at every display model they had, bottom grill on the phone shows a miniscule gap towards the center of the device. speaker grill on top also shows a gap that is more prominent towards the ir blaster. Not sure if this is normal but i will try to visit other locations even a sprint or t-mobile store and look at the build quality on their versions and take pictures to compare. im not too sure of why something like this should happen, but my 1st guess would be an unlevel surface underneath most likely from the injected plastic... i really hope it isnt, such a beautiful phone. something like this should not have a rushed manufacturing process.
About the gap, I got 3 Ones from Att and they all got tiny gaps, but seem to be glued tight, but I mostly looked at uneven speaker grills and screen, since all had some!
Ps, Double Dip is lovely case, got one with the purchase
Every single One we have sold at my store has has zero gap. I've made it a point to look at each one.
Sent from my HTC One X using xda premium
CraigP17 said:
Every single One we have sold at my store has has zero gap. I've made it a point to look at each one.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I just got my "baby" yesterday. And with trying to entertain a 1 year old with a slight head cold, plus do all the data transfers from my One X+ to this one, I never thought to actually look the thing over. But I'll be darned, after reading the first few posts just now, I took my case off and yep, there is an ever so slight defect as well. Their not gaps..but a slight "wavelike" unevenness all around. I have very sensitive tactile sensations in my fingers, so i can feel roughness on certain spots. Trying not to let it bother me, but my neuroticism is trying to kick in.
davidper said:
I had the same issue with mine, and the store manager said he would only exchange it if it had three dead pixals. The phone had about five dead pixals but in two different clusters which made it seem like only two pixals, due to the high dpi. The store manager than called att and asked what he should do because he was only able to see two dead spots/pixals. They probably told him it was up to him and that the defective pixals should be clearly seen with the naked eye. He refused to exchange it because he felt uncomfortable not being able to see more than two dead spots/pixals. I tried a different store with much success. Probably because the store manager was so understanding of the issue.
Click to expand...
Click to collapse
Really, they refused you an exchange? When I had my Optimus G, they exchanged it for me because it got too hot. If you get a new device and it has dead pixels, they should not be able to refuse service. Dead Pixels should not be a standard.
rajbsn said:
Wow!!I was wondering it's only me or a wide spred issue. Now I know it's not just me. My phone looks perfect at the top but the bottom has imperfections. There is a very slight gap and I can feel the ups and downs when I move my finger around the edges. I think I should go to AT&T sore and see if the replace it.
Click to expand...
Click to collapse
Mine is fine, I don't think this is WIDESPREAD issue.
The bezel on right side of the screen when holding the Tablet on landscape with 1hand from the right there's agap feeling on my thumb feels like pressing gaps with sound as in seems loose from right defected feeling compared to the left side feel
Is this a universal issue or my device is among the unlucky faulty of ones
Going to recieve mine soon and will let u know how mine feels on the right side.
Sent from my K00C using Tapatalk
Crozar said:
The bezel on right side of the screen when holding the Tablet on landscape with 1hand from the right there's agap feeling on my thumb feels like pressing gaps with sound as in seems loose from right defected feeling compared to the left side feel
Is this a universal issue or my device is among the unlucky faulty of ones
Click to expand...
Click to collapse
Mine does the same, it was one of the first things I noticed. Mine does it when pressing my thumb a bit over the midline, like 40% into the right bezel, measuring from the top right corner and going downwards. The left bezel feels the most solid but the others have creaking spots.
It is not a big deal imo.
brugobo said:
Mine does the same, it was one of the first things I noticed. Mine does it when pressing my thumb a bit over the midline, like 40% into the right bezel, measuring from the top right corner and going downwards. The left bezel feels the most solid but the others have creaking spots.
It is not a big deal imo.
Click to expand...
Click to collapse
since you've mentioned this , im going today to check Sony Electronics here in UAE and test their demo to see if this is a universal issue , its an issue of irritation from its solidity coming from sony this hurts their name. if people accept keeping the condition this way then handling the device will sway from the comfort level of slick solid feel by time.
I don't have that issue with my Xperia Z2 Tablet
I have this issue. Makes a creaking sound when I pinch the tablet on the right side. Did not do this when I first got the tablet but started a couple days ago. Did not seem to affect the water proofing but I only tried running it under a faucet.
Can we warranty this?
gigafast said:
I have this issue. Makes a creaking sound when I pinch the tablet on the right side. Did not do this when I first got the tablet but started a couple days ago. Did not seem to affect the water proofing but I only tried running it under a faucet.
Can we warranty this?
Click to expand...
Click to collapse
I'm getting a replacement
Crozar said:
I'm getting a replacement
Click to expand...
Click to collapse
I just returned my Z2 tablet and got a reinbursement.
My unit started to have very noticeable rippling artifacts and flashes on the right edge when I was holding the tablet landscape with my right hand. Not always, but far from subtle when it happened, and I do not think I was gripping unreasonably hard. Additionally, holding the tablet from the right edge would sometimes wake up the tablet as if I had double tapped the screen.
It could be my unit but it looked like a weakness in its design so I do not trust the build quality of this model for the long term though I liked everything else about it.
I received my z2 tab today and the right bezel seems fine. No clicking or Halloween feeling to it.
Sent from my SGP511 using Tapatalk
brugobo said:
I just returned my Z2 tablet and got a reinbursement.
My unit started to have very noticeable rippling artifacts and flashes on the right edge when I was holding the tablet landscape with my right hand. Not always, but far from subtle when it happened, and I do not think I was gripping unreasonably hard. Additionally, holding the tablet from the right edge would sometimes wake up the tablet as if I had double tapped the screen.
It could be my unit but it looked like a weakness in its design so I do not trust the build quality of this model for the long term though I liked everything else about it.
Click to expand...
Click to collapse
so did your reimbursed set have the same sound? I'm hearing it on mine now. =\
sebastiny said:
so did your reimbursed set have the same sound? I'm hearing it on mine now. =\
Click to expand...
Click to collapse
I got a refund. Got my money back and I no longer have a Z2.
I recomend that prospective buyers try it at several stores so they get a feeling of its average build quality and buy at one that allows refunds just in case.
I am disappointed by the build quality and I wish those 50 grams they saved from the first Z were used to reinforce the body instead. The original Z tablet was light enough already.
In all other regards, however, the tablet was the best Android tablet experience you can buy.
Crozar said:
I'm getting a replacement
Click to expand...
Click to collapse
How's your replacement? still have the sound??
sebastiny said:
How's your repla
cement? still have the sound??
Click to expand...
Click to collapse
im waiting for comtel to give me one since they sent it to sony asia and perhaps this week if not im getting the money back and find another retailer to buy a new one and give u guys feedback for sure
No other owners facing same issue?
ok I just got my new replacement I think this issue is from the production line or somehow its a design flow, this is the 2nd one im feeling and it feels diffrent then my first, the first that I had replaced had the issue from the right side and now this one has the issue from the left side but its diffrent, no more crackling sound under the bezel, but this is just like a loose feel more over then the one from the past, I guess the more tighter they make it the more crackling sound u will feel when handling device. I still didnt test the touch screen and water proof, im going to be using this daily on water and give a later feedback on touch screen and anything else, atleast its less frustrating then my previous one which kept sketching crackling sounds on the right side of the bezel whenever I pick it up with 1 hand from the right.
OK until now was under water for 15min lots of bubbles was coming out of it from the bezel where their was no port it was weird unlike the first one. Its not an iPad the gaps loose feeling from the design is the only problem. The back feels is not enforced proper to the whole build quality. It's like ablowfish,medium pressure presses can make you feel the sway of the build qualities loosness of the chassis /back. &screen
Water goes in the bezel feels heavier after its set under water and I am not sure please verify with your tablet
New update...
Yes water goes in just verified now the crackling sound is back when it used to be a gap of air is now a crackling sounds. The bezel body of this build design is not reinforced perfectly. This is an obvious glitch Sony please wake up.
If u guys want I can demonstrate what I mean and how I knew water goes in from the right side of this tablet.
Once I diped it in my bath tub theirs bubbles lots of little bubbles coming from the upper right edge of the bezel... Meaning air is released....
Their was no sound when I used to carry this tablet with ( one hand) from the (right side edge) on Landscape
But now that first issue still arises..
It's the same issue with the one I had replaced.
Sony is not aware of this issue please help shoutcast to people like Engadget and the review people to reach Sony since Sony support line and emails are dense to react to whom.
i have a same problem on my LTE version SGP521. feels like cheap poorly made device when I hear that cracking sound and I have a feeling that could compromise water tight seal. I talked to sony support and they gave me retarded respond saying give it a time. WTF Sony???
I'm gonna start calling them up until I get replacement I'm not waiting this will not get fixed itself magically.
Myne is same model tablet , the sgp is Singapore base and this issue is the same issue that z2 phone owners are experiencing in Singapore.
if u Google gap screen z2 Singapore, the results will show z2 phone owners 2months ago complaining about the gaps and water resistant.
Sony did not fix Singapore past problem with the z2 phone owners, if this issue is just Singapore I hope so then I'm returning my tablet and ordering one from UK or USA.