Bricked after sbf on OTA .629?
Now we found the way to unbrick your d2g, the main developer is the guy who found the way to root .629.
Follow the step now
# If your device bricked after flash .29/.33,please flash full .608 sbf at first
1.Download this sbf file and flash in RSDLite
db.tt/WCJQX72O
2. Reboot recovery ,wipe and apply .629 ota update.zip (www.mediafire.com/?591t5kzfmgcm4d5)
NOTE: Step 2. is VERY important, when you finished flash sbf in step 1. ,your device working on a UNSTABLE .608 & .629 hybrid rom
Now your device work
BTW. If you have any problem when using OTA .629 and want reset your phone, just flash full .608 sbf to brick your phone and unbrick again
Sent from my DROID2 GLOBAL using xda premium
zyy757 said:
Bricked after sbf on .629?
Now we found the way to unbrick your d2g, the main developer is the guy who found the way to root .629.
Follow the step now
# If your device bricked after flash .29/.33,please flash full .608 sbf at first
1.Download this sbf file and flash in RSDLite
http://db.tt/EVi6YJPy
2. Reboot recovery and apply .629 ota update.zip
Now your device work
Sent from my DROID2 GLOBAL using xda premium
Click to expand...
Click to collapse
the link is broke and i try before with sbf 608 and keep on the same screen message "bootloader"....
fulvi0 said:
the link is broke and i try before with sbf 608 and keep on the same screen message "bootloader"....
Click to expand...
Click to collapse
Sorry, the url has updated
Sent from my DROID2 GLOBAL using xda premium
thx
zyy757 said:
Sorry, the url has updated
Sent from my DROID2 GLOBAL using xda premium
Click to expand...
Click to collapse
don't worry thank you, i'm already did, and my phone is working, thank you very much.
My pleasure
thanks man , it worked for me, i unbreaked my d2g
thanksssssssssss
unbrick a softbrick
I tried to root my MD2G
and it gave me the following reply
Bootloader
DO.11
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery low
Cannot program
The last 2 lines keep flashing.
I try to charge the battery to no avail.
this has been going on for 2 days.
Please could some one help me out
I do not know what to do.
maceugene said:
I tried to root my MD2G
and it gave me the following reply
Bootloader
DO.11
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery low
Cannot program
The last 2 lines keep flashing.
I try to charge the battery to no avail.
this has been going on for 2 days.
Please could some one help me out
I do not know what to do.
Click to expand...
Click to collapse
Charge, or change another battery
Sent from my DROID2 GLOBAL using xda premium
buy a $5 spare battery charger from ebay or amazon
http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846
thanks alot.just bought one. will take about 11 days to get to me. after done all will keep you informed.thanks
Always Bootloader
My D2G always goes into Bootloader whatever i do adn shows
"Bootloader
D0.11"
I flashed it with VRZ_A956_4.5.608_1FF_01.sbf then BL=2 BOOT REC CDT.sbf but again the same problem. Couple of times phone got started but for only some time, after some time when i reboot the phone it goes into bootloader. i need immediate help guys...
One thing more i have another D2G which got bricked after .629 but when unbrick method was discovered it got fixed with no issues. the reason i am sharing this is that it was going into bootloader straightaway when i press power button BUT this new one shows M logo for some time and then goes into bootloader...
zyy757 said:
Charge, or change another battery
Sent from my DROID2 GLOBAL using xda premium
Click to expand...
Click to collapse
I got the charger and charged the battery.
Flashed as instructed but after it shows the motorola sign.It does not go futher. remains at 100% and nothing more
What do u advice i do?
it just got stuck, reboot phone should be good
edit: sorry, you may need to boot into recovery, and wipe data
Sent from my DROID X2 using xda premium
---------- Post added at 11:47 PM ---------- Previous post was at 11:41 PM ----------
wipe date in
Android Recovery
http://droid.koumakan.jp/wiki/Android_Recovery
did you get it?
Sent from my DROID X2 using xda premium
chetansaraf said:
My D2G always goes into Bootloader whatever i do adn shows
"Bootloader
D0.11"
I flashed it with VRZ_A956_4.5.608_1FF_01.sbf then BL=2 BOOT REC CDT.sbf but again the same problem. Couple of times phone got started but for only some time, after some time when i reboot the phone it goes into bootloader. i need immediate help guys...
One thing more i have another D2G which got bricked after .629 but when unbrick method was discovered it got fixed with no issues. the reason i am sharing this is that it was going into bootloader straightaway when i press power button BUT this new one shows M logo for some time and then goes into bootloader...
Click to expand...
Click to collapse
Plz somebody help me out on this
Downgrade .629
Hello,
I have updated the phone to .629 however I would like downgrade to .608
Is there method for this?
Thanks
no, once on 629, that's it, any other sbf will brick phone
---------- Post added at 11:19 PM ---------- Previous post was at 11:14 PM ----------
you can use ezSBF & Root 2.3.4/ 4.5.629 to root if that's what you want
:crying:
What are the problems with this version?
depends on what you mean, by problems?
it can be rooted, bootstrapped, and flash roms
what else do you want?
I thought there were more.
Thanks
Related
Atrix 2.3.4 - 4.5.91
First off, I've done like 10 hours of researching today so please bare with me.
I thought I had unlocked my bootloader and rooted my phone in the past. I'm able to tether so that was a sign I did it.
Today I attempted to install romracer cwm based recovery with rom manager. When i tried to install Rom from the sd. it restarted and said "failed to boot 2" after doing some research it said it was possible my bootloader was not unlocked. Now I think i did the right steps back when.
How do I find out for sure if my boot loader is unlocked.
I'm doing all this because Im attempting to get my phone back to stock as can be. I want to get it back to warranty for the following reasons
1) my video play back is all messed up on my recorder. (will a sbf fix this)?
2) when i insert a external sd card to my atrix, my screen sometimes turns black when it wants to).
So this is where i'm stuck. I read the newbie threads. Thanks for all the info. But man this "failed to boot 2" scared me. Luckily it didn't brick my phone. Took out battery and it started back up.
Help please
If your unlocked it will say unlocked in red letters at top of screen when turned on. If you aren't unlocked its possible you have just rooted your phone I think not positive that a factory reset would unroot your phone. Just go into recovery hold volume down when turning it on cycle down with volume down and choose with volume up in recovery both volume rockers are used to navigate and power is choose.
Sent from my MB860 using XDA App
freshbakd'
.tried what you told me. Got a android guy and “!” next to him. My phone doesn't say unlocked. I took out battery to restart it cause it froze with android guy. Any more info
So i did a factory reset. I guess there was more steps i need to take when I saw the android logo and "!". is my phone unrooted thanks for anyone who can help. As mentioned before. I don't think my phone was ever unlocked because I didn't see it when I started up my phone.
lambdaman4 said:
freshbakd'
.tried what you told me. Got a android guy and “!” next to him. My phone doesn't say unlocked. I took out battery to restart it cause it froze with android guy. Any more info
Click to expand...
Click to collapse
Use pudding thread to unlock your bootloader, install Rom Racers CWM via fastboot after you are unlocked. If you want to make sure you are rooted after that, use the Moto root, stuck at top of the General section.
Sent from my MB860 using xda premium
Actually man if yer trying to get back to stock for warranty stuff or whatever just flash the 2.3.4 sbf. And be done with it.
Sent from my MB860 using Tapatalk
Phalanx7621 said:
Actually man if yer trying to get back to stock for warranty stuff or whatever just flash the 2.3.4 sbf. And be done with it.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
i doubt I can flash without being bootloader being unlocked. I did a hard reset. wiped everything out. So thats why I was asking if that unrooted my phone.
lambdaman4 said:
i doubt I can flash without being bootloader being unlocked. I did a hard reset. wiped everything out. So thats why I was asking if that unrooted my phone.
Click to expand...
Click to collapse
You can flash to stock if your bootloader is locked. I did it and worked like a charm.
Sent from my MB300 using XDA App
pre4speed said:
You can flash to stock if your bootloader is locked. I did it and worked like a charm.
Sent from my MB300 using XDA App
Click to expand...
Click to collapse
+10 char. This. .sbf are flashed with rsd on your computer. Not with the phones recovery. That's why I mentioned this option for ya.
Sent from my MB860 using Tapatalk
O yeah forgot haven't used that in awhile when u get to the Droid with the I push in volume up and down at same then it enters stock recovery
Sent from my MB860 using XDA App
Im really scared. I have an atrix rooted and unlocked. I had neutrino 2.7gt on it and due to being buggy I chose to flash ee, but did so as an update. It worked but then I had to format my sd card and re flash the addons and when i did i got stuck in a bootloop. so i tried to get into android recovery mode and now I just have a blank screen please help me.
Try flash a SBF Rom via RSD Lite. Take care, you must be careful. This is not a hard brick, so there is a solution. Tell me when you do it
How do i do that
This exact same thing happened to me with the blank recovery screen and boot loop, what I did to fix it was wiping my recovery via fast boot then flashed neutrino2.7 again using rom racer. It turned out that notorious posted a bad link to the rom that resulted in this.
Sent from my MB860 using XDA
italosnt said:
Try flash a SBF Rom via RSD Lite. Take care, you must be careful. This is not a hard brick, so there is a solution. Tell me when you do it
Click to expand...
Click to collapse
Do not flash SBF after unlock. Ignore this post and 'unthank'!
Sent from my MB860 using xda premium
LOL
Of course you can flash a sbf after unlock. I got this SAME problem. Solved it flashing a SBF rom and got that problem that don't recognize soft buttons. Solved this new one with a fix found here, at XDA Forum!
CaelanT said:
Do not flash SBF after unlock. Ignore this post and 'unthank'!
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Its recommended not to sbf flash, but seeing as you offered no alternative method, perhaps you should delete your post. I also have used sbf flash to recover from a soft brick and confirm it works. You will need the last firmware you use for stock.
Sent from my MB860 using xda premium
Don't forget to wipe all you can . You can find Stock SBF Versions and how to do it easily here
If you're not comfortable with rsd you can use fastboot as well.
Sent from my MB860 using xda premium
The same thing happened to me. I used fast boot and erased the recovery in fast boot and then fast boot flashed cwm recovery using the zip. File from their website
I used the instructions from the second post on this thread.
http://forum.xda-developers.com/showthread.php?t=1564363
Sent from my MB860 using XDA
italosnt said:
Of course you can flash a sbf after unlock. I got this SAME problem. Solved it flashing a SBF rom and got that problem that don't recognize soft buttons. Solved this new one with a fix found here, at XDA Forum!
Click to expand...
Click to collapse
Sass86 said:
Its recommended not to sbf flash, but seeing as you offered no alternative method, perhaps you should delete your post. I also have used sbf flash to recover from a soft brick and confirm it works. You will need the last firmware you use for stock.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Both of you:
Just because you flashed a SBF after unlock and didn't hard brick does not mean it's OK to do it. There are warnings all over the forums about flashing a SBF after unlock. You should NOT flash a SBF, plain and simple.
I won't delete my post. My post stands, The post prior to it recommends flashing a SBF. I need offer no alternative to tell the OP that this is bad advice!
CaelanT said:
Both of you:
Just because you flashed a SBF after unlock and didn't hard brick does not mean it's OK to do it. There are warnings all over the forums about flashing a SBF after unlock. You should NOT flash a SBF, plain and simple.
I won't delete my post. My post stands, The post prior to it recommends flashing a SBF. I need offer no alternative to tell the OP that this is bad advice!
Click to expand...
Click to collapse
Warnings against unlocking bootloaders.. did you stop at those warnings? Warnings about flashing custom ROMs, did you heed to those warnings as well? The only reason they SUGGESTED not to use rsd is because it runs the most risk! Your phone loses connection from your computer, you get hard bricked. Phone loses power during flash, hard bricked. Cwm is the quickest and safest (as is fastbooting) but doesn't mean you can't use rsd. Stop being a troll.
Sent from my MB860 using xda premium
Sass86 said:
Warnings against unlocking bootloaders.. did you stop at those warnings? Warnings about flashing custom ROMs, did you heed to those warnings as well? The only reason they SUGGESTED not to use rsd is because it runs the most risk! Your phone loses connection from your computer, you get hard bricked. Phone loses power during flash, hard bricked. Cwm is the quickest and safest (as is fastbooting) but doesn't mean you can't use rsd. Stop being a troll.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I never said you can't use a SBF! They didn't suggest it is bad advice, I did! You basically agreed with me, so what's your point?
Sent from my MB860 using xda premium
CaelanT said:
I never said you can't use a SBF! They didn't suggest it is bad advice, I did! You basically agreed with me, so what's your point?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I said: "Try flash a SBF Rom via RSD Lite. Take care, you must be careful. This is not a hard brick, so there is a solution"
You said: "Do not flash SBF after unlock"
It's a bad advice, i know it. Do you see another way to solve it? Or do you prefer a phone soft bricked than try to solve it? If there is a better way to do.. i don't know it, so tell me. Sorry but we're trying to help him/her, he/she doesn't know what to do. Please stop say you're right or wrong, that i'm right or wrong... it doesn't matter . Please post a solution, we will thank you
Rooted and unlocked moto electrify.
i have been flashing roms on several phones for many years. i always rely on the devs here at xda to help me through and you guys never fail!!!
my electrify is unlocked and rooted, been running th3bills cm10 for several weeks, also tried miui aokp and others. all great roms and great work!!
i was changing my keyboard on my phone and ran into trebuchet stopped working and couldnt get it to do anything. i tried reflashing the rom without wiping hoping it would fix it but it did. i did a reset and wipe and reload of the rom and it still stopped working. i then decided to, while in recovery, partition the sd card mount just cause i like to learn and i do that by trying thing, anyway, when i did it hung up for like 5 mins. thought it was kinda long so i pulled the battery. At this point im not sure of all the steps i took to get cm10 on my phone but it took a lot. after i put the battery back in and started the phone the screen comes on, says unlocked up in the corner but no red dual core symbol, instead it has this on the screen.......................................
unlocked
PwrReason: SW_AP_RESET
OS will boot in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
----------------------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is mode:
Fastboot
.......................Not sure whats up and if there is any affects on the rom
If any devs or members have any info or want to try to fix this or can fix if it does cause problems please reply to the post. ill take any info available.
thanx to all the devs for all their hard work! i think i speak for everybody when i say how much your work is appreciated!!!
[email protected]
pm me on the xda app as well. rhewins2268
electrify rooted unlocked and running th3bills cm10
Its not erased. Your boot logo is erased and possibly your PDS partition is lost too. Just means you can't activate PR update your prl normally anymore.
Sent from my MB855 using xda premium
---------- Post added at 04:17 AM ---------- Previous post was at 04:15 AM ----------
To fix, restore your PDS through CWM, and also flash a boot logo through fastboot or cwm with a flashable zip.
Sent from my MB855 using xda premium
Looking into that now. In the meantime....is it going to have bad affects on my ROM. Also do you know where to get files needed to fix?
Sent from my MB855 using xda premium
No. I actually prefer it that way. Its just an issue whenever you sbf back to stock and your phone attempts to activate itself.
As far as files and such, search via Google or xda for PDS fix, it'll show either a thread for the atrix or photon.
And then search for boot logos to flash.
Sent from my MB855 using xda premium
So just to clarify.... when I sbf back to stock I will have to do what to activate?
Will I have to dial *228 or what will I run into for issues?
I have already done a lot of Google searches and found the file you spoke of last night for the atrix (does it matter?) and instruction on how to push it to my phone.
Just trying to be ahead of the game and have my info before moving forward. Phone is running great with no issues so far.
Basically picking your brain for knowledge and help before I soft brick or some sh** and have to lock my bootloader to get my phone back.
So....... thank you very much for your help and insight into this. Had never seen it before.
Sent from my MB855 using xda premium
http://forum.xda-developers.com/showthread.php?p=14888120
Follow that link and since your bootloader is unlocked, use fast boot to flash. download the PDS gingerbread zip and unzip.
Doing that will allow you to ota update in case you revert to stock.
For flashing a boot logo, follow this link and read a few posts into it to find a cwm-flashable zip to restore your boot logo: http://forum.xda-developers.com/showthread.php?t=1187337
***Don't sbf with the uscc sbf because it will lock your bootloader. ***
Sent from my MB855 using xda premium
I believe this is the question and then i'll leave you alone for a day or so lol
Do i have to be on a stock rom to do this or can i do it on th3bill's cm10 or other custom roms?
To you hoslayer13.... you have been a wealth of knowledge! I tip my hat to you sir!
To answer your question, yes you can be on a custom rom to do this but before you do check your PDS partition first. I am pretty sure there will be only a lost-found folder with nothing in it.
Sent from my MB855 using xda premium
Yes it is just an empty folder. Using file manager that comes with cm10 that comes with root access in the root directory I find a folder "PDS" and it is empty. I'm going to push the fix now and will update my results.
Sent from my MB855 using xda premium
I flashed the fix and have noticed to Ill affect on the ROM so far. Also flashed boot logo. Working great!
Thanks again hoslayer13!!
Thank you xda! Always there!
Sent from my MB855 using xda premium
Hey no problem. I'm glad I could help
Sent from my MB855 using xda premium
Needing some help again!!! Hoping you can help. dont know if you noticed but i started a new thread. reall did it this time. Fail to boot 1. only have fastboot. bootloader relocked while rsding 2.3.4 on the phone. it fail and never rebooted. hoping you can help. whem i type moto-fastboot oem unlock i get infooem not implemented or something. the bootloader has to be from 2.3.4 though cause that is what i flashed.
ANY THING AT ALL PLEASE
i can get to fastboot and flash the RDL3_unlocked.smg file and achieve temp unlock but no rsd so can go to the next step. Im trying everything i can and still nothing yet. Gonna keep trying but some help woyld really be great!! PLEASE!!
i tried downgrading 2.3.6.-4.5.145 and am stock on failed to boot 1 is there any 2.3.6-4.5.145 sbf
I don't think one is out only 4.5.141 I think
Sent from my HTC EVARE_UL using xda premium
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
Just wondering how u got that way
Sent from my HTC EVARE_UL using xda premium
genini87 said:
i tried downgrading 2.3.6.-4.5.145 and am stock on failed to boot 1 is there any 2.3.6-4.5.145 sbf
Click to expand...
Click to collapse
What you are going to need to do to fix this is to flash the unlocked bootloader. After that your phone should boot. If it doesn't you will need to get into recovery mode and do a factory reset. Here is a link to the unlock tool.
http://www.mediafire.com/?10f83rrqura05rg
Thanks!
Dark9781 said:
What you are going to need to do to fix this is to flash the unlocked bootloader. After that your phone should boot. If it doesn't you will need to get into recovery mode and do a factory reset. Here is a link to the unlock tool.
Thanks! Bro! working again my Atrix :good::good::good::laugh::laugh:
Click to expand...
Click to collapse
Spawn125 said:
Dark9781 said:
What you are going to need to do to fix this is to flash the unlocked bootloader. After that your phone should boot. If it doesn't you will need to get into recovery mode and do a factory reset. Here is a link to the unlock tool.
Thanks! Bro! working again my Atrix :good::good::good::laugh::laugh:
Click to expand...
Click to collapse
No problem. Good to hear.
Sent from my Atrix HD MAXX on JB
Click to expand...
Click to collapse
I've been searching all night for how to recover from this. I was trying to get upgraded to Jellybean, but ended up in this soft brick state after RSDLite. Read a lot of tricks, but this batch file made it about as easy as it could ever be! Thanks!
Unfortunately my phone is still hosed. Wifi/bluetooth goes in and out and sometimes crashes the phone all together. It's the exact same thing my last one did after about a year, and it's right at a year again. No warranty this time around though. Guess I'll upgrade to the Nexus 4 or something.
Dont give up
Paco103 said:
I've been searching all night for how to recover from this. I was trying to get upgraded to Jellybean, but ended up in this soft brick state after RSDLite. Read a lot of tricks, but this batch file made it about as easy as it could ever be! Thanks!
Unfortunately my phone is still hosed. Wifi/bluetooth goes in and out and sometimes crashes the phone all together. It's the exact same thing my last one did after about a year, and it's right at a year again. No warranty this time around though. Guess I'll upgrade to the Nexus 4 or something.
Click to expand...
Click to collapse
Bro dont give up
http://forum.xda-developers.com/showthread.php?p=41022427#post41022427
This can be fixed!!
Guys
Actually by mistake I install electrify rom in my motorola photon 4g and now my photon got restart again and again after 5 min
So I am unable ro use this. I install 2.3.5 version of electrify
Can anyone help me to back my photon
Pleae guys I need your help
Return to photon is nearly imposible, becouse 2.3.5 sbf for photon is not available. Try a full wipe from recovery.
It may help. If not then root your phone install bootstrap recovery and flash roms for locked bootloader like peetr hybrid rom
Sent from my MB855 using Tapatalk 2
pradeeppk said:
Return to photon is nearly imposible, becouse 2.3.5 sbf for photon is not available. Try a full wipe from recovery.
It may help. If not then root your phone install bootstrap recovery and flash roms for locked bootloader like peetr hybrid rom
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
I also tried full wipe from recovery, but no luck.
mayanksaini47 said:
I also tried full wipe from recovery, but no luck.
Click to expand...
Click to collapse
Then try to root it and install bootstrap.
Or flsh electrify sbf one more time. May be an incorrect flash lead to this
Sent from my MB855 using Tapatalk 2
---------- Post added at 05:53 PM ---------- Previous post was at 05:45 PM ----------
http://forum.xda-developers.com/showthread.php?t=1798145
Sent from my MB855 using Tapatalk 2
pradeeppk said:
Then try to root it and install bootstrap.
Or flsh electrify sbf one more time. May be an incorrect flash lead to this
Sent from my MB855 using Tapatalk 2
---------- Post added at 05:53 PM ---------- Previous post was at 05:45 PM ----------
http://forum.xda-developers.com/showthread.php?t=1798145
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
Actually I flash electrify sbf 2 times, its never completed. Its always stuck on middle of the flashing but electrify OS is on the photon.
Can you tell me I have to root via photon or electrify root ?
mayanksaini47 said:
Actually I flash electrify sbf 2 times, its never completed. Its always stuck on middle of the flashing but electrify OS is on the photon.
Can you tell me I have to root via photon or electrify root ?
Click to expand...
Click to collapse
Please read through the thread link provided.
Is your photon showed any trouble before flashing. What is the reason behind 2.3.5 sbf flashing
Sent from my MB855 using Tapatalk 2
Actually I was facing "RSD protocol support" error on my photon. So I thought that was bcoz of some software so I flashed this electrify sbf. After some time it was bcoz of volume up button was not working. Now my phone is rebooting again and again
mayanksaini47 said:
Actually I was facing "RSD protocol support" error on my photon. So I thought that was bcoz of some software so I flashed this electrify sbf. After some time it was bcoz of volume up button was not working. Now my phone is rebooting again and again
Click to expand...
Click to collapse
If you are getting starting rsd protocol message during booting is due to faulty vol up button. ( vol up+ power on = rsd protocol mod, vol down + power on = fastboot mod )
I think the initial problem was stucked vol up button .
Sent from my MB855 using Tapatalk 2
Ya that button problem was solved
Can you tell me how to flash rom from bootstrap. Id you know can you tell me the step by step for flash
Sent from my GT-N7100 using xda premium
mayanksaini47 said:
Ya that button problem was solved
Can you tell me how to flash rom from bootstrap. Id you know can you tell me the step by step for flash
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Various steps for different roms. Be carefull about selecting roms. Only flash roms for locked bootloader. Otherwise your phone will be bricked. I suggest peeters hybrid rom for locked bootloader.
Sent from my MB855 using Tapatalk 2
pradeeppk said:
Various steps for different roms. Be carefull about selecting roms. Only flash roms for locked bootloader. Otherwise your phone will be bricked. I suggest peeters hybrid rom for locked bootloader.
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
But I want to know the steps because I read lots of forms but I didn't find step
So please guys can you provide me steps
thanks in advance
Guys I performed these step for flash (http://forum.xda-developers.com/showthread.php?t=1798145)
Quote:
Originally Posted by yairku View Post
1)Flash this SBF. Now you'll have stock 2.3.5 for Electrify. But you need Sprint services (I assume), so you don't stop here.
2) Download bootstrap from DroidX2 forum, and get it working. Of course you need to root your photon first.
3) Flash this ROM from bootstrap. Please follow the instructions for this ROM carefully, you don't wanna flash the SBF again.
4) Flash 254_13 modules with bootstrap. you need them.
5) Flash 2.3.5_254_13 sv2 boot, recovery and cdrom image sbf with RSD Lite.
6) Flash 254_12 libmoto_ril.so with bootstrap. You don't need to flash the radio SBF.
4) and 6) is not needed, if you install rom 3)
Here is the problem Now I am facing
After step 1 my my photon rebooting again and again (may be stock are not stable in phone so thats why its rebooting )
Now on step 2 I root my phone via Photon-Torpedo Direct v1.1 and my phone is rooted
Now on 3rd step I am not able to flash rom via bootstrap (copy rom in SD card and open recovery mode and run "apply update from SD card" but getting error "E:signature verification failed, Installation aborted" ) I am stuck here
Please help me guys. I need it badly
Guys I got my photon back after 2 months
Yappeeeeeeee
Thank you so much guys for help:good::good::good::good::good::good::good::good:
can you please share what steps you taken to restore sprint from electrify?
Help
Hi,
I'm on the same position.
My photon have the electrify rom.
Now, i have succes install the super user and bootstrap recovery, but i can't install MOF 2.3.5 slim ROM or HybridGBv20locked ROM.
When i try, i have this message : (and for all rom)
Installing : SDCARD:Stock Photon 4.5.1A-1_SUN-254_13.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/Stock Photon 4.5.1A-1_SUN-254_13.zip
(bad)
Installation aborted.
If it possible, how ??
Could you tell me how do you win @mayanksaini47
Thanks for your help
-----
anybody ?? for help me ?
Can you please share your method
mayanksaini47 said:
Guys I got my photon back after 2 months
Yappeeeeeeee
Thank you so much guys for help:good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
Hello,
Can you please share your method that how you get your phone back.
Thank you
Sajid