Hi everyone
2 weeks ago, when i was working with my gt-i9100 (with miui rom"gingerbread base version") it suddenly stopped working and i had to restart it.
After that, when it turned on, everything started to "Force close" and nothing worked correctly.
so i made a backup with Clockworkmod, but when i started to backup, after getting some backup, and i think in making something called MD5, it said that its not possible to complete the backup.
After that i upgraded my device to ICS 4.0.3.
now i want to restore my SMS to ICS and i didn't succeed. because when i copy MMSSMS.DB file to my device and after restarting that, Messaging won't work and i even tried to install miui on my device(ICS Based) and copying that file and even the whole database directory, but every time this caused my device to not working properly and messaging started to crash.
Now i have my old "data.ext4.tar" file which contains all previous data (Like "Data" folder) and i don't know how to deal with it anymore....
Does anyone have a solution for this problem?
currently ICS(NOT MIUI, Official one) is running on my device, and i want to restore my MIUI SMS Backup to ICS.....Has anyone faced with this problem and found a solution?
I will appreciate any help from you guys....
Thanks in advance...
Iman
even your Backup from MIUI failed at the end while creeating MD5 checksum, it is already made and written on the clockworkmode backup folder, you cant use it to restore with CWM because there is no MD5 created, but you can still extract apps and datas from that Nandroid backup using Titanium Pro.
MD5 checksum writing error is a known issue of CWMpacked in the MIUI roms, the solution
no.1 : flash Siyah kernel from CWM, then you will get a Redpill advanced recovery, make backup from that.
no2 : install rom manager and falsh touch recovery from there (you have to pay)and reboot into recovery and make backup, worked fine for me. touch recovery is only a temp recovery which is opened from update zip each time when you reboot to CWM only from ROM manager. from 3 botton combo and reboot from anywhere else will give you current recovery only...
Thanks a lot, but I'm trying to find an easier way to restore my sms, I mean is there any way for example to convert my old mmssms.db file to a file which can be replaced by my current file and see my previous messages? I guess it must be so...
yes there should be some solution...lets wait someone will share...
opening that file with any text editor, somehow you may be able to read your old messeges I hope...
Yes, i can open it with notepad+, but I want them on my device...
Any other ideas?
iman_mir200 said:
Thanks a lot, but I'm trying to find an easier way to restore my sms, I mean is there any way for example to convert my old mmssms.db file to a file which can be replaced by my current file and see my previous messages? I guess it must be so...
Click to expand...
Click to collapse
You have a solution that works very well here :
http://forum.xda-developers.com/showpost.php?p=24533276&postcount=1
Here's how I did it :
1. Download "yaffs-mmssmsdb-calls-extractor.zip" on the post I give above.
2. Unzip the file somewhere on your disk
3. Download and install Python v3.2.3 for Windows you can find here : http://www.python.org/download/releases/
4. you must put your mmssms.db file in the folder you extracted from "yaffs-mmssmsdb-calls-extractor.zip"
5. Open Dos prompt (Start Menu / Run / type "cmd")
6. Navigate to your folder (example : "cd c:\yaffs" if you extracted the files in c:\yaffs folder)
7. type "extract -s mmssms.db".
If everything is ok, you will see the following message : Read xxx messages (xxx is the number of sms found in your database)
8. Then you must put a name for the file that will extract (example : "sms_backup")
9. then you will see the "sms_backup" file in your folder. You have to manually add the extension ".xml" to your file (sms_backup.xml)
10. You can then use an Android application such as "SMS Backup & Restore" to import your sms via your xml file.
For me everything worked. Try and tell us if it worked for you.
And sorry for my english !!!
Thank you so much.....
Great solution with great result
iman_mir200 said:
Thank you so much.....
Great solution with great result
Click to expand...
Click to collapse
Glad it works for you too.
I invite you to thank abbot2, the creator of this script that saved me just like you.
rani2001 said:
Glad it works for you too.
I invite you to thank abbot2, the creator of this script that saved me just like you.
Click to expand...
Click to collapse
I did that, just as i read his solution...
Simple solution
iman_mir200 said:
Hi everyone
2 weeks ago, when i was working with my gt-i9100 (with miui rom"gingerbread base version") it suddenly stopped working and i had to restart it.
After that, when it turned on, everything started to "Force close" and nothing worked correctly.
so i made a backup with Clockworkmod, but when i started to backup, after getting some backup, and i think in making something called MD5, it said that its not possible to complete the backup.
After that i upgraded my device to ICS 4.0.3.
now i want to restore my SMS to ICS and i didn't succeed. because when i copy MMSSMS.DB file to my device and after restarting that, Messaging won't work and i even tried to install miui on my device(ICS Based) and copying that file and even the whole database directory, but every time this caused my device to not working properly and messaging started to crash.
Now i have my old "data.ext4.tar" file which contains all previous data (Like "Data" folder) and i don't know how to deal with it anymore....
Does anyone have a solution for this problem?
currently ICS(NOT MIUI, Official one) is running on my device, and i want to restore my MIUI SMS Backup to ICS.....Has anyone faced with this problem and found a solution?
I will appreciate any help from you guys....
Thanks in advance...
Iman
Click to expand...
Click to collapse
Simple solution: jeflab.net/2012/08/09/importare-gli-smsmms-da-un-database-miui/
Thanks so much, worked flawlessly
Really really appreciate your help, Perfect
Please help.
Please find attached my .db file. Can you help me convert it to .xml? I have tried the suggestions but I must be missing something. Please help.
DO NOT EXTRACT -
RENAME backp.ZIP to backup.DB
Thank you.
rani2001 said:
You have a solution that works very well here :
http://forum.xda-developers.com/showpost.php?p=24533276&postcount=1
Here's how I did it :
1. Download "yaffs-mmssmsdb-calls-extractor.zip" on the post I give above.
2. Unzip the file somewhere on your disk
3. Download and install Python v3.2.3 for Windows you can find here : http://www.python.org/download/releases/
4. you must put your mmssms.db file in the folder you extracted from "yaffs-mmssmsdb-calls-extractor.zip"
5. Open Dos prompt (Start Menu / Run / type "cmd")
6. Navigate to your folder (example : "cd c:\yaffs" if you extracted the files in c:\yaffs folder)
7. type "extract -s mmssms.db".
If everything is ok, you will see the following message : Read xxx messages (xxx is the number of sms found in your database)
8. Then you must put a name for the file that will extract (example : "sms_backup")
9. then you will see the "sms_backup" file in your folder. You have to manually add the extension ".xml" to your file (sms_backup.xml)
10. You can then use an Android application such as "SMS Backup & Restore" to import your sms via your xml file.
For me everything worked. Try and tell us if it worked for you.
And sorry for my english !!!
Click to expand...
Click to collapse
Related
i am using cynogenmod 7 on my sgs2 i backed up my rom via cwm recovery
i need to recover because all of my contacts were wipped and my pc crashed and had to format it so i lost the backup of my all contacts
so now i have this files in my backup folder
1- ".android_secure.vfat.tar " it is 605mb
2- "boot.img" it is 8mb
3- "data.ext4.tar" 887mb
4- "system.ext4.tar" 482mb
and wen i try to restore it shows md5 file missing and i have seen the posts which are there so i also tried it in terminal emulater i used the given commands but it did not work it said not found i tried adb shell it said not found
then at first su
it worked it gave me"#" this sign then again i did adb shell it showed again not found then i did the cd given codes in that also it said not found please help me
ps: i am new to all this so please help and please be as simple as u can
thank you in advance
CWM recovery should work if you have the exact same CWM recovery you used to backup with .
jje
Thanks but i already did that i used the same version of cwm recovery it is showing the missing files error
ralphrss said:
Thanks but i already did that i used the same version of cwm recovery it is showing the missing files error
Click to expand...
Click to collapse
Try creating a blank nandroid.md5 file with notepad and then place the same in the backup folder and then try restoring backup.
hope this helps!
ksantoshh said:
Try creating a blank nandroid.md5 file with notepad and then place the same in the backup folder and then try restoring backup.
hope this helps!
Click to expand...
Click to collapse
how do i do that exactly please give me some pointers and my note pad does not have the option of md5 files if u have it can u make me a copy of blank nandroid or tell me how to make it please and thankyou
Try Copy MD5 to desktop open with notepad delete contents and close and save . jje
JJEgan said:
Try Copy MD5 to desktop open with notepad delete contents and close and save . jje
Click to expand...
Click to collapse
i am missing the md5 file
i only have the four files which are given above which is in the first post
so can you please tell me how to make the new md5 file
ralphrss said:
how do i do that exactly please give me some pointers and my note pad does not have the option of md5 files if u have it can u make me a copy of blank nandroid or tell me how to make it please and thankyou
Click to expand...
Click to collapse
just save as .txt then change the extension to md5 using file explorer or similar.
if you long press on a file in file explorer it should popup with some options. Select rename and change the extension from txt to md5
ozzy lion said:
just save as .txt then change the extension to md5 using file explorer or similar.
if you long press on a file in file explorer it should popup with some options. Select rename and change the extension from txt to md5
Click to expand...
Click to collapse
i will try it will let you know if it worked or not
worked like a charm
For future, you realize your contacts auto sync to gmail.....
Sent from my GT-I9100 using Tapatalk 2
Today I wanted to see what the JellyBean for SGS III is like so I made a nandroid backup of my current setup. After playing with JB for a while, I wanted to restore the backup, but I was greeted with an error message.
I've been messing with this the entire F****** day and so far I've isolated the file that is corrupted (it's /system/app/Keystring_factory.apk).
So I need to delete that file from within the archive. The problem is how do I do that? When I try to copy the file to my computer, it hangs on it and says "corrupted file" (tried windows explorer but also total commander). I am able to open the archive on my SGS III using something like ZArchiver, but it doesn't have the option to delete the file from within the archive.
Help?
Deusdies said:
Today I wanted to see what the JellyBean for SGS III is like so I made a nandroid backup of my current setup. After playing with JB for a while, I wanted to restore the backup, but I was greeted with an error message.
I've been messing with this the entire F****** day and so far I've isolated the file that is corrupted (it's /system/app/Keystring_factory.apk).
So I need to delete that file from within the archive. The problem is how do I do that? When I try to copy the file to my computer, it hangs on it and says "corrupted file" (tried windows explorer but also total commander). I am able to open the archive on my SGS III using something like ZArchiver, but it doesn't have the option to delete the file from within the archive.
Help?
Click to expand...
Click to collapse
U can extract cwm with titanium backup or use a file explorer to extract the backup and delete the file then zip it.
But I would flash a new Rom and extract cwm with TB and restore the parts u need with TB.then when all is good make a new backup.
I don't think it's a good idea to restore a corrupted file even if u find the errors
Btw. Fayaab has tweeted that he is going to release a JB for gs3 tomorrow and this should be working
Tried that too, Titanium got stuck at the file. 7-Zip got stuck even when "Testing Archive". I'll write the file off as corrupt. Interestingly enough, the data.ext4.tar is also corrupt. Does this mean it's a time for a new microSD card? Or is it CWM that's writing corrupt files somehow?
Access system files from recovery any use .
http://forum.xda-developers.com/showthread.php?t=1646108
Works on SGS3
jje
Hi friends i would like to share the problem that i faced and solved with other's help.
This thread is only for the people who have the md5 mismatch error while restoring nandroid backups. I created this thread since there were no similar questioned thread.
This error comes usually due to renaming the nandroid backup folders.
Try any one of the following fixes to solve this,
1. Use a program editor like notepad++ to open the nandroid.md5 file and remove all lines except the first line which would have some hex values follwed by boot.img.
2. run the following commands in terminal emulator of ur android:
#cd /sdcard/clockworkmod/backup/(name of backup)
#rm nandroid.md5
#md5sum *img > nandroid.md5
Hit the thanks button if u think the post to be helpful!
I've tried, but didn't generate a new checksum?!?
Tedo said:
I've tried, but didn't generate a new checksum?!?
Click to expand...
Click to collapse
Are you sure u typed the commands correctly. The command surely creates a nandroid.md5 file in the nandroid backup folder with the checksum values.
parkourkarthik said:
Are you sure u typed the commands correctly. The command surely creates a nandroid.md5 file in the nandroid backup folder with the checksum values.
Click to expand...
Click to collapse
all good and well...why step one though? if you're just rm'ing it...seems a little unnecessary....? sorry i just performed step one then looked at step 2 and thought..wtf! lol unless theres something im clearly missing....?
sinner99 said:
all good and well...why step one though? if you're just rm'ing it...seems a little unnecessary....? sorry i just performed step one then looked at step 2 and thought..wtf! lol unless theres something im clearly missing....?
Click to expand...
Click to collapse
I am sorry did i miss saying that u can use any one of the fixes!! That means it's not a step by step it's either this or that, u can use whatever u wish that would be easy for u aong the two methods..
Sent from my GT-S6102 using XDA
Files not found
where to find these nandroid backup files
rjawan said:
where to find these nandroid backup files
Click to expand...
Click to collapse
Hi,
Look on your sd card/clockworkmod/backup.
Missing backup files
Have an AT&T Samsung Galaxy S4 (SGH-i337) Have made a couple of backups with CM and they show up in the Backup and Restore when in CM app. The path shows /mnt/shell/emulated/clockworkmod/backup but when I use ES File Explorer or Explorer they are not to be found. I can open /mnt/shell but the shell folder says 'Empty Folder'.
The reason I want to open the backups is to fix the MD5 checksum errors I always get when trying to restore.
It must be something simple but I can't figure it out.
parkourkarthik said:
Hi friends i would like to share the problem that i faced and solved with other's help.
This thread is only for the people who have the md5 mismatch error while restoring nandroid backups. I created this thread since there were no similar questioned thread.
This error comes usually due to renaming the nandroid backup folders.
Try any one of the following fixes to solve this,
1. Use a program editor like notepad++ to open the nandroid.md5 file and remove all lines except the first line which would have some hex values follwed by boot.img.
2. run the following commands in terminal emulator of ur android:
#cd /sdcard/clockworkmod/backup/(name of backup)
#rm nandroid.md5
#md5sum *img > nandroid.md5
Hit the thanks button if u think the post to be helpful!
Click to expand...
Click to collapse
ems_pilot said:
Have an AT&T Samsung Galaxy S4 (SGH-i337) Have made a couple of backups with CM and they show up in the Backup and Restore when in CM app. The path shows /mnt/shell/emulated/clockworkmod/backup but when I use ES File Explorer or Explorer they are not to be found. I can open /mnt/shell but the shell folder says 'Empty Folder'.
The reason I want to open the backups is to fix the MD5 checksum errors I always get when trying to restore.
It must be something simple but I can't figure it out.
Click to expand...
Click to collapse
Have you granted ES File Explorer Root permission ? Have you looked on both the Internal, and External SD ?
Have looked everywhere but don't know about granting ES File Explorer root permission....... Thanks for the quick reply.
prboy1969 said:
Have you granted ES File Explorer Root permission ? Have you looked on both the Internal, and External SD ?
Click to expand...
Click to collapse
---------- Post added at 11:02 PM ---------- Previous post was at 10:30 PM ----------
Granted Su to ES File Explorer, was able to see my nandroid.md5 files, edited and now restoring backup... Thank you very much for your expert help.
Now I have to figure out how to move my apps to my SD card. Thanks again!
ems_pilot said:
Granted Su to ES File Explorer, was able to see my nandroid.md5 files, edited and now restoring backup... Thank you very much for your expert help.
Now I have to figure out how to move my apps to my SD card. Thanks again!
Click to expand...
Click to collapse
You can move them with Titanium Backup.
TEAM MiK
MikROMs Since 3/13/11
cant access MD5
i installed CWM & made a rom backup, it said "Backup completed" & wiped data & &dalvik cache. now when tried to install custom rom, in recovery mode it doesnt opens ext sd card(where my custom rom is) & also when i try to restore backed up rom it says MD5 mismatch. As a result i am stucked up in recovery mode. now how to access that rom backup? my phone doesnt starts so i cant get it through ES explorer. also backup is in internal sd card so cant open it in computer also
parkourkarthik said:
Hi friends i would like to share the problem that i faced and solved with other's help.
This thread is only for the people who have the md5 mismatch error while restoring nandroid backups. I created this thread since there were no similar questioned thread.
This error comes usually due to renaming the nandroid backup folders.
Try any one of the following fixes to solve this,
1. Use a program editor like notepad++ to open the nandroid.md5 file and remove all lines except the first line which would have some hex values follwed by boot.img.
2. run the following commands in terminal emulator of ur android:
#cd /sdcard/clockworkmod/backup/(name of backup)
#rm nandroid.md5
#md5sum *img > nandroid.md5
Hit the thanks button if u think the post to be helpful!
Click to expand...
Click to collapse
atulbuddy said:
i installed CWM & made a rom backup, it said "Backup completed" & wiped data & &dalvik cache. now when tried to install custom rom, in recovery mode it doesnt opens ext sd card(where my custom rom is) & also when i try to restore backed up rom it says MD5 mismatch. As a result i am stucked up in recovery mode. now how to access that rom backup? my phone doesnt starts so i cant get it through ES explorer. also backup is in internal sd card so cant open it in computer also
Click to expand...
Click to collapse
You can find any other ways to Mount the SD card in recovery, with the help of adb shell or any other methods to access the backup file.
Else with the help of externel sdcard flash any stable ROMs and then try the restore thing.
Else try flashing the stock firmware available for your model.
Hit thanks rather than typing it
Thanks for the info!! Still working in android 4.4. Just saved me, thank you.
hi guys. i tried all your steps but no success. when i try with android emulator i get /system/bin/sh:cd/sdcard..... not found
and i try to edit the file and i install notepad but i get just some symbols inside the file so i have no ideea where the first line ends
I dont have PC or ADB. any other way to fix the problem?
Hi friends i would like to share the problem that i faced and solved with other's help.
This thread is only for the people who have the md5 mismatch error while restoring nandroid backups. I created this thread since there were no similar questioned thread.
This error comes usually due to renaming the nandroid backup folders.
Try any one of the following fixes to solve this,
1. Use a program editor like notepad++ to open the nandroid.md5 file and remove all lines except the first line which would have some hex values follwed by boot.img.
2. run the following commands in terminal emulator of ur android:
#cd /sdcard/clockworkmod/backup/(name of backup)
#rm nandroid.md5
#md5sum *img > nandroid.md5
Hit the thanks button if u think the post to be helpful![/QUOTE]
I dont have PC or ADB. any other way to fix the problem?
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?
Hi,
I'm new with this, and tried to update my Lenovo Vibe X2 to the most recent rom that I found... it is a custom rom, basicly the latest version without the chinese applications.
I read a little and saw some videos, to update it using the sp flash tool. And I made it... using the option Format+download :cyclops:
Now I have it updated, but my phone has invalid IMEI , MAC, etc... Reading a little more, I found some indications to restore the IMEI, but I would like some help to avoid be worst that it is.
I have an online Nandroid backup, that I make before the flash, I can see the files in Nandroid Manager...
boot.img, cache.ext4.tar, data.ext4.tar, nandroid.md5, recovery.img, recovery.log, system.ext4.tar
So, is it possible restore the original NVRAM from my backup and apply it using the sp flash tool?
Thank's in advance for any kind of help.
Regards,
Cristiano.
Any help?
solved
cocarvalho said:
Any help?
Click to expand...
Click to collapse
Thanks everyone! I found an solution. Regards.
Hi
Can you explain how you did or point me to the right direction?
Ihave the same problem
thanks
Tectudo8 said:
Hi
Can you explain how you did or point me to the right direction?
Ihave the same problem
thanks
Click to expand...
Click to collapse
Hi!
Let me try explain...
First of all, I install the FX explorer and the ROOT add on for it. I used it to explore my backups and copy the files to the root directories.
- Copy your backup to your phone (if you don't have yet)
- Enter in the FX explorer and navigate in the MAIN STORAGE and go to your backup directory (in my case the clockworkmod)
- In this directory, enter in the data.ext4.tar file
- And after that, go to DATA
- And access NVRAM directory
- MD directory
- NVRAM directory
- NVD_IMEI directory
- hold at MP0B_001 file, and select COPY option
- back into the first menu and select the option SYSTEM (ROOT)
- Go to /data/NVRAM/MD/NVRAM/NVD_IMEI directory and paste the file...
Now the IMEI was restored.
After that, you can do the same, going to /DATA/NVRAM/APCFG/APRDEB directory of you backup and copy all files
Go to the SYSTEM ROOT enter in the same directory /DATA/NVRAM/APCFG/APRDEB and paste all files.
Now you can reboot you phone and the magic comes true... The IMEI, MAC_Address was restored and NVRAM Wifi removed.
Good luck.
Let me know if you have any question.
Regards,
Hi again and thanks for asnwer
I have a problem
When I go to /data/NVRAM/MD/ with root and fx nothing appears...
Itried creating the next directories and paste the file but that way it didnt work
Do you know what could be the problem?
Do I have to make a phone call to do this?
cocarvalho said:
Hi!
Let me try explain...
First of all, I install the FX explorer and the ROOT add on for it. I used it to explore my backups and copy the files to the root directories.
- Copy your backup to your phone (if you don't have yet)
- Enter in the FX explorer and navigate in the MAIN STORAGE and go to your backup directory (in my case the clockworkmod)
- In this directory, enter in the data.ext4.tar file
- And after that, go to DATA
- And access NVRAM directory
- MD directory
- NVRAM directory
- NVD_IMEI directory
- hold at MP0B_001 file, and select COPY option
- back into the first menu and select the option SYSTEM (ROOT)
- Go to /data/NVRAM/MD/NVRAM/NVD_IMEI directory and paste the file...
Now the IMEI was restored.
After that, you can do the same, going to /DATA/NVRAM/APCFG/APRDEB directory of you backup and copy all files
Go to the SYSTEM ROOT enter in the same directory /DATA/NVRAM/APCFG/APRDEB and paste all files.
Now you can reboot you phone and the magic comes true... The IMEI, MAC_Address was restored and NVRAM Wifi removed.
Good luck.
Let me know if you have any question.
Regards,
Click to expand...
Click to collapse
Do I have to make a phone call to do this?