I flashed my S2 yesterday with CheckROM and I like it and everything but I'd like to try MIUI today but I'm not sure how I would go about this? I think I may have to wipe my phone (already have a backup from before I flashed with CheckROM) and then just install MIUI like I did CheckROM? Correct me if there is another way or I'm wrong.
Just go into clock work recovery, wipe data cache, flash miui.
Sent from my GT-I9100
MKULTRA- said:
I flashed my S2 yesterday with CheckROM and I like it and everything but I'd like to try MIUI today but I'm not sure how I would go about this? I think I may have to wipe my phone (already have a backup from before I flashed with CheckROM) and then just install MIUI like I did CheckROM? Correct me if there is another way or I'm wrong.
Click to expand...
Click to collapse
Wipe cache and Wipe Dalvik cache in recovery then flash your rom .
OR
...................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Miui formats system for you.
Sent from my GT-I9100
atifsh said:
Miui formats system for you.
Sent from my GT-I9100
Click to expand...
Click to collapse
By formats system do you mean wipes everything or just cache?
Let's see.......
You wipe data, cache but your phone can boot, because the OS remains.
You wipe system OS got removed, you can't boot phone.
Wiping system is the cleanest flash you can do.
Sent from my GT-I9100
Related
Hi,
I just flash the Rom Batista70 3.6, after flashed, I found that it is not the ROM I want, so I flashed my S2 to other ROM. However, The boot logo have been changed to "Batista70" and I am unable to restore it to original one, can someone show me how can I change the bootup logo back to the original?
Ir you flashed vía cwm then you will have a copy of the old Rom on your internal SD card.wipe it.then do a full wipe again and factory reset from recovery and re-install the new Rom.once done don't forget to wipe stats.
Do a full wipe before doing anything (flashing ROM, restoring backup and so on), and trust me, you will forget half of problems that you're experiencing now. I always see here people complaining here on that or that and most of these problems can be solved by doing full wipe (cache, data, system, Dalvik cache)
I already wipe everything before flash MIUI1.8.12, seems the previous rom replace default logo files that other roms seldom replace
Sent from my GT-I9100 using XDA App
andylcm said:
I already wipe everything before flash MIUI1.8.12, seems the previous rom replace default logo files that other roms seldom replace
Click to expand...
Click to collapse
Have you tried to re-flash kernel?
Thx. I just try to refresh kernel, the orginal logo with yellow triangle come back. But when I use my jib to reset refresh count, the modified logo come again, any ideas?
Sent from my GT-I9100 using XDA App
Have you wiped phone as instructed and flashed a full stock rom . If not do that .
jje
Hey all so after I update my firmware to XWKK5 do I have to wipe everything while in recovery mode is it really necessary?
What do you want to achieve with deleting all from recovery?
If you've upgraded, then the phone is in the version upgraded. If you delete all from recovery, you have to reinstall the entire ROM or the phone wont boot...
Thought I had to Wipe Data / factory reset and Wipe Cache Partition?
RoRo1990 said:
Thought I had to Wipe Data / factory reset and Wipe Cache Partition?
Click to expand...
Click to collapse
Instructions are to be followed .
Custom roms usually ask for wipe but not stock roms .
jje
RoRo1990 said:
Hey all so after I update my firmware to XWKK5 do I have to wipe everything while in recovery mode is it really necessary?
Click to expand...
Click to collapse
You don't need to do that if you are upgrading from a Stock ROM. If you chose the wipe version of ROM for flashing then it'll automatically wipe you device. If you use non-wipe it'll upgrade and everything remains same.
Wipe is only recommended when you are switchin from Custom to Stock or vice-versa else after a version downgrade say KK5 to KJ3.
Hope it helped.
Trying to install themes on the S2 and everytime I keep getting bootloop no matter what theme it is. Tried an ICS and also the Ultratoxic themes
What I am thinking of doing is a wipe data/ factory reset in ClockworkMod mode then load up the Rom via Odin and then flash the theme
Will this work or does the wipe data also delete the back ups created with CWM?
Anything else that maybe causing boot loop?
On UltraToxic Rom and latest Siyah Kernel
The bootloop might be caused if you use a SystemUI.apk/Framework different than the one supported by the ROM.
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .Or even just to clear out old roms etc .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Still problems use usb jig to set rom counter to zero .
Return to service centre .
Or throw in the Liffey .
jje
If the theme is not made for you rom, then you get bootloops.
If the theme is made for you rom and you still get bootloops, wipe the cache and chances are it will boot.
Lennyz1988 said:
If the theme is not made for you rom, then you get bootloops.
If the theme is made for you rom and you still get bootloops, wipe the cache and chances are it will boot.
Click to expand...
Click to collapse
The theme is made for my Rom [ROM][2.3.6][XWKK5] UltraToxic Rom v8.0.1 - Lite'ning Themed
I have tried the themes and did the whole wipe cache etc and developer still does not know why I am getting bootloop?
If I do the below what odes the format cache do that is different than wipe it
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove batteryBoot to download mode
Open Odin
Install correct stock firmware
Will hold of on throwing it in the Liffey expensive phone and Ireland is broke
Hey guys!!!
New galaxy S2 owner. I have done some searching in these forums and the threads answered many of my questions. However, I still have some newbie questions that I found unanswered. Please excuse me if my questions have been answered before but I got tired of searching
Here is the deal:
Yesterday, I flashed a CF Root with Odin3. Then used CWM to flash a wanamlite firmware. The firmware was great but I didn't like that it still had TW. So I dl'ed another firmware to the internal SD card and flashed again using CWM. I then flashed a couple of other ROMS and I noticed that after the first wanamlite flash, the new ROMs were unstable with many error messages that some OS processes have stopped etc.
I got back home, flashed to stock with Odin3 and the phone got stuck at the second samsung logo. I followed some community steps (thanks XDA) like disabling all kies processes from TM, wiping data/cache, then boot in DL mode and flash the stock ROM using Odin3 which worked.
I then Flashed a CF Root again and used CWM to flash a Spike Pure ICS ROM v5 which was great but I get occasional error messages like 'gallery stopped' or some other error message when I try to set contact photos. It just lags, blackscreen then comes back with the 'Unfortunately, the process had stopped'.
My questions: is this because of the previously flashed firmware that this is happening or is it that those ICS ROMs have these issues commonly? Did anyone have this experience before? What do you advice before flashing to a new ROM going back to stock or going straight from the current? Doesn't Odin3 technically wipe everything back to stock?
WIPE WIPE WIPE.
Go into recovery. Data/factory reset.
Advanced, Wipe dalvic cache. Mounts and storage, format system. Its a standard procedure going from one OS to another OS. You can then either flash a firmware zip from recovery or an .tar file from Odin.
Then to be on the safe side factory reset once again.
Sent from my GT-I9100 using Tapatalk 2
Wich fw do you have?
Make a deep clean with odin an flash on the latest ics version (lp9 is a good one)..then flash (if you want) a custom rom..
My experience with custom roms: one of the best rom samsung based (ics 4.0.3) is the foxhound greyfox v2..if you want a pure ics rom flash the omega aokp rom (ics 4.0.4)..
Try then to change kernel..siyah is the best for both roms..
P.s. sorry for my bad english
Sent from my GT-I9100 using Tapatalk 2
After LP7 should be staple enough for daily use .However you are using custom roms and you should read carefully each roms thread before flashing .
You are probably suffering from flashing multiple roms and leaving bits behind as well = clean wipe .
jje.
Can someone give me a clear full wipe procedure? I always wiped data/factory rest/wiuped chaceh and dalvik... but what else? a step by step procedure would be helpful!!
I currently have Spike Pure ICS v 5.
What do you mean by Odin3 'deep clean'?
OJ77 said:
Can someone give me a clear full wipe procedure? I always wiped data/factory rest/wiuped chaceh and dalvik... but what else? a step by step procedure would be helpful!!
Click to expand...
Click to collapse
Read my last post..
Sent from my GT-I9100 using Tapatalk 2
so:
1. Recovery mode > format user data > wipe cache > clear dalvik > format system (from moutns and storage)
2. Download mode > flash stock ROM using odin 3
Did I get it right? Was there something i didn't wipe?
Before you flash a new rom, make sure you answer the requirements.Some ICS roms need to be flashed in specific way.
The way of doing a full wipe is you go in Clockwork mode, wipe data/factory reset, you wipe cache partition, then go to advanced wipe Dalvik and Battery stats, then go in mounts and storage ( i think ) and you wipe the cache from there, but nothing else in mounts and storage.If you wipe anything else there's a high percent of bricking your phone.If this doesnt help you, I doubt that anyone could give you any clearer instructions.
Good luck.
DONT FORMAT SYSTEM.
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Followed by root and custom rom if you so wish .
jje
OK im confused now... do I format system directory in mounts and storage or no?
OJ77 said:
OK im confused now... do I format system directory in mounts and storage or no?
Click to expand...
Click to collapse
i always do personally.
I got tempted and formatted system/cache/data but now i cannot flash from my internal sd card.. I get errors and 'installation aborted' if i try to do it from CWM... does that mean formatting those 3 means Odin3 is the only way? Cus I'm not home and I don't have odin3 on me.... LOL!
OJ77 said:
I got tempted and formatted system/cache/data but now i cannot flash from my internal sd card..
Did you format sd card and totally wipe the lot = nothing on the phone .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
At this point you have no OS on the phone nor kernel rooted nor CWM .
Hence
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Click to expand...
Click to collapse
JJ, you really need to learn how to quote you know, makes your posts so confusing to read sometimes
skimminstones said:
JJ, you really need to learn how to quote you know, makes your posts so confusing to read sometimes
Click to expand...
Click to collapse
Agree must try better .
Habit from replying to emails i guess .
jje
Thanks...
I did a 'full wipe' by doing t his:
1. Boot into CWM: wipe data, wipe cache, wipe dalvik, wipe battery stats, wipe system/data/cache from mounts.
2. Reboot into DL mode, flash stock ROM using Odin3.
3. Repeat step 1
4. flashed spike ICS v 7.3 using CWM. Stable so far.
Thank you!
imho: the most stable ics release is the stock official, but with some.battery issues, my suggestion: stay on gingerbread, find a custom kernel to suits your need,
GT-I9100, official 2.3.6, hardcore's Speedmod
budi.hermawan said:
imho: the most stable ics release is the stock official, but with some.battery issues, my suggestion: stay on gingerbread, find a custom kernel to suits your need,
GT-I9100, official 2.3.6, hardcore's Speedmod
Click to expand...
Click to collapse
I agree! I don't like ICS because is still unstable! My battery lasts very short with ICS and the phone overheats.
Moreover I hate the browser! I mean, The Galax S2 with GB still has the smoother browser of all the smartphones out there, and Samsung with ICS update messed it up! Now is laggy with micro stutters! Don't understand why!
OJ77 said:
The firmware was great but I didn't like that it still had TW.
Click to expand...
Click to collapse
You didn't need to go through all that trouble just because you didn't want TW (which I also hate, btw).
You could simply have installed another launcher (such as Go Launcher EX, ADW, etc) from Play Store and, since you were already rooted, uninstalled TW using Titanium Backup afterwards. It has to be in that sequence (install new then uninstall old).
this way you can have whatever ROM + kernel combination you like, and still use whatever launcher you prefer.
Hi,
I was using stock firmware up until yesterday I flashed to v5.2 successfully. Everything is working fine. But I just have a question, I remember that after the flash, and the phone rebooted and I connected to my wifi...the phone automatically started to download and install all the 4 apps that i had personnally installed on the stock firmware all by itself ..
I'm asking because I see that there a v6.0 available and would like to flash that. But before I flash, do I need to do the following wipes?
Wipe data/factory reset
Wipe Cache
Wipe Dalvik Cache
If so, do I need to do this for between EVERY Omega flashes to ensure it goes smoothly? Thanks
NocNoc9595 said:
Hi,
I was using stock firmware up until yesterday I flashed to v5.2 successfully. Everything is working fine. But I just have a question, I remember that after the flash, and the phone rebooted and I connected to my wifi...the phone automatically started to download and install all the 4 apps that i had personnally installed on the stock firmware all by itself ..
I'm asking because I see that there a v6.0 available and would like to flash that. But before I flash, do I need to do the following wipes?
Wipe data/factory reset
Wipe Cache
Wipe Dalvik Cache
If so, do I need to do this for between EVERY Omega flashes to ensure it goes smoothly? Thanks
Click to expand...
Click to collapse
You should only have to wipe cache and dalvik then flash the ROM. You'll be fine, I also always format cache and system in the mount and storage part of Cwm recovery BEFORE flashing the ROM, never had an issue.
bungknees said:
You should only have to wipe cache and dalvik then flash the ROM. You'll be fine, I also always format cache and system in the mount and storage part of Cwm recovery BEFORE flashing the ROM, never had an issue.
Click to expand...
Click to collapse
Is that considered a FULL wipe?
NocNoc9595 said:
Is that considered a FULL wipe?
Click to expand...
Click to collapse
No, full wipe is when you delete all user data as well.
bungknees said:
No, full wipe is when you delete all user data as well.
Click to expand...
Click to collapse
Ok I found the definitions of what a full wipe and no wipe is:
Full Wipe Install means:
- Wipe Data / Factory Reset
- Wipe Cache and Dalvik Cache
- Format System partition
- Install
No Wipe Install means:
- Wipe Cache and Dalvik Cache
- Install
Just a question, in the FULL WIPE listed above, where would I find "Format System Partition?" I don't recall seeing that..which category do I enter to do it?
CWM recovery mounts and storage format system .
jje
JJEgan said:
CWM recovery mounts and storage format system .
jje
Click to expand...
Click to collapse
Thanks, is there any harm if I do a full wipe EverytimeI upgrade an Omega ROM? I just want to stick to one way of things to minimize any issues.