[Q] Help with Flashing - Galaxy Ace S5830 General

Today i found my phone very slow and internal memory almost full with nothing really installed.
I decided to flash DDKQ5 (Indian Firmware). When i used Odin and flashed my device. All the process went through fine. Odin showed Green (pass) but when i checked my phone it wasnt flashed. I could see the old apps and contacts still. Where am i going wrong?
And yea i am flashing DDKQ5 over DDKQ5

Do
Wipe cache,
Wipe data/factory reset
Wipe dalvik cache
from recovery and reboot.
Hope it solves ur problem.

Install clockwork mod.
Flash custom rom
Sent from my GT-S5830 using XDA

Related

Cant flash custom rom

Hey,
I cannot install any custom rom on my phone even after rooting and installin cwm.I followed all the instructions to the T and still i always end up goin right upto the select language screen before it goes off or im stuck at the android logo.Please give me a solution as i am desperate to try a custom rom.Btw i tried installin over DDKQ5,DDKQ6 & XXKPH.Cannot install Cyanogenmod,my-ui or even sonygenmod.
Thanks so much
Im on kph & hv flashed all d above roms on my fone.
Sent from my GT-S5830 using xda premium
hey stuck on boot logo there are many questions like this ok consegregate........
now the answer before flashing any rom wipe factory resets ,wipe card partitions and wipe delvik cache using cwm and also keep your battery full .i installed cm7 rc1 by grif with this method.
and also use roms build for ace only hahahaha
Where's your phone from?
I had some problems flashing some roms for S5830 since mine is S5830B.
before installing any custom rom in recovery do a factory reset then wipe cache partiton and dalvik cache then flash the rom
My phones from India.I did do all the wipes and resets.Even tried flashing with sys and data mounted.Tried even after formatting system and data.But nothing works.The only rom which i successfully flashed through cwm is ginger real 1.4.
zane05 said:
My phones from India.I did do all the wipes and resets.Even tried flashing with sys and data mounted.Tried even after formatting system and data.But nothing works.The only rom which i successfully flashed through cwm is ginger real 1.4.
Click to expand...
Click to collapse
U said u wer not able to install cyanogenmod, right? Even my fone is frm india & i've tried many roms without any problems. Can u tell me in detail hw u tried to install cyanogenmod and on which firmware u tried it on? Maybe i can help u more.
Sent from my GT-S5830
I tried on ddkq5,ddkq6 and kph.I had grif's cyanogenmod on my sd.wiped cache ,dalvik cache and factory reseted the phone.Mounted the sys and data.Then installed the zip file.after this it boots till the select language screen and then goes off.if i restart it the same thing happens.Tried factory reseting and wiping caches even after flashing but it does not help.Facing the same problem for MY-UI as well as gingercruzt.I even tried format the system before flashing.Tried with cwm v4 as well as v5.

[Q] How to remove a ROM so I can flash with a different ROM?

I flashed my S2 yesterday with CheckROM and I like it and everything but I'd like to try MIUI today but I'm not sure how I would go about this? I think I may have to wipe my phone (already have a backup from before I flashed with CheckROM) and then just install MIUI like I did CheckROM? Correct me if there is another way or I'm wrong.
Just go into clock work recovery, wipe data cache, flash miui.
Sent from my GT-I9100
MKULTRA- said:
I flashed my S2 yesterday with CheckROM and I like it and everything but I'd like to try MIUI today but I'm not sure how I would go about this? I think I may have to wipe my phone (already have a backup from before I flashed with CheckROM) and then just install MIUI like I did CheckROM? Correct me if there is another way or I'm wrong.
Click to expand...
Click to collapse
Wipe cache and Wipe Dalvik cache in recovery then flash your rom .
OR
...................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Miui formats system for you.
Sent from my GT-I9100
atifsh said:
Miui formats system for you.
Sent from my GT-I9100
Click to expand...
Click to collapse
By formats system do you mean wipes everything or just cache?
Let's see.......
You wipe data, cache but your phone can boot, because the OS remains.
You wipe system OS got removed, you can't boot phone.
Wiping system is the cleanest flash you can do.
Sent from my GT-I9100

[Q] Help with bootlooping Galaxy Player 4.0

Followed instructions to flash KlassicRom and am now bootlooping.
Installed Steve's Kernel and booted into CWM where I made a backup.
Then back to odin to install KlassicRom R5 - no errors but on reboot just bootlooped.
After waiting 15 minutes with bootlooping, I booted into CWM to restore. Restore indicated success but on reboot, now just get Samsung boot screen with Steve's android guy in the corner. Stuck on boot.
I can still reboot into CWM and Odin recognizes the player when in download mode, so I'm hoping it's recoverable.
Anyone available to guide?
Thanks in advance for any help!
DCoy
Boot into CWM and
wipe cache
Factory Reset
go to advance and Wipe Dalvick Cache
then exit CWM and reboot.
Tried the wipes before. Did so again.
No errors reported with Wipe Cache
No errors reported with Factory Reset
Wipe Dalvik Cache reports:
Dalvik Cache wiped.
E:unknown volume for path [/sd-ext]
Reboot hangs at Steve's Android guy and Samsung again.
R5 don't work with steve's kernel. It only works with klin kernel or terrasilent.
Sent from my YP-G1 using xda premium
zaclimon said:
R5 don't work with steve's kernel. It only works with klin kernel or terrasilent.
Sent from my YP-G1 using xda premium
Click to expand...
Click to collapse
Downloaded and Odin Flashed R3
Odin reported PASS
on reboot, bootlooping again.
Booted into CWM and Wiped Cache, Factory Reset, and Wiped Dalvik, then reboot.
Bootlooping still.
Same error messages as before when boot hung:
No errors reported with Wipe Cache
No errors reported with Factory Reset
Wipe Dalvik Cache reports:
Dalvik Cache wiped.
E:unknown volume for path [/sd-ext]
Then bootlooping.
US or international, if US there is a stock but rooted ROM on here somewhere (not the full restore using heimdall), i'll look for it later that you can use to flash back with odin then boot into STOCK recovery and wipe data and factory reset that is what got me out of the bootloops when I first started flashing.
here is the link if your running the US model http://forum.xda-developers.com/showthread.php?t=1512331&highlight=stock+rooted+4+0
Downloaded the stock rom. Odin flashed. Booted into stock recovery and did factory reset/wipe.
Rebooted to joy. Thanks!
Might wait a bit before trying to flash the custom rom again.
DavidCoy said:
Downloaded the stock rom. Odin flashed. Booted into stock recovery and did factory reset/wipe.
Rebooted to joy. Thanks!
Might wait a bit before trying to flash the custom rom again.
Click to expand...
Click to collapse
Flash the terrasilent kernel and use that version of CWM to make a backup, its a much newer version and backs up things the older misses, also don't have the USB cable connected to the player when your in CWM thats what seamed to throw me into the bootloop, As long as you stick to Klins ROMs only (not using any of those CM7's or anything based off CM7) what you just experienced and solved with the "stock" ROM flash is the worst case scenario when flashing only variations of Klin's ROM with Odin.

Soft bricked.. I guess :s

I had ICS.. backed with titanium and upgraded to JB with Liquidsmooth's rom... however I failed to read that titanium backedup contacts couldn't restore from ICS to JB... after reinstalling Liquidsmooth I thought the error might be with the ROM so I installed Omega's JB rom... nice bootscreen... pity it stayed in a bootloop... I then reinstalled it from cwm after removing the battery (a few times) and getting into recovery.... however it remained the same...
so.. I get into odin.. PDA -> ChainFire's "CF-SGS3-CWM-v5.5-v1.5.tar" worried that all I've don'e is put a ics kernal into a JB rom... I boot into recovery and install an old (possibly original root) ROM... now it boots past the animated logo just stays on the static -Samsung- logo... I can boot into odin.. not tried to boot into recovery...
but I don't have a recovery rom... (I have searched)...
could someone point me in the right direction please
Thanks
Have you tried wiping cache and dalvik, maybe try factory reset.
If all that fails this is what I do:
Boot into recovery
Go to mounts and storage
Format cache, System, data and internal sd card. (of course you will lose all data)
Then flash a full stock firmware package through Odin.
Done
Sent from my GT-I9300 using xda app-developers app
Obagleyfreer said:
Have you tried wiping cache and dalvik, maybe try factory reset.
If all that fails this is what I do:
Boot into recovery
Go to mounts and storage
Format cache, System, data and internal sd card. (of course you will lose all data)
Then flash a full stock firmware package through Odin.
Done
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I found a stock 4.04 (ICS) rom... still soft bricked... I'll wipe everything except internal SD card... see if that works.. else guess I got no other option :s... I am pretty much backed up so I'm not completely fussed.. but I know there will be something that was missed...
didn't have to do a full wipe... but when I power-off it still reboots... I have to remove battery to power off?
Just do a wipe from Recovery, often the problem then not.

[Q] Problem installing custom rom

Hi Guys
Im having some problems trying to install a custom rom into my new Galaxy SIII I9300.
The rom in question is OmegaRom V35
After roooting and all, yesterday i tryed installing the rom with mobile odin, following all the instructions.
The result was the phone rebooted after the instalation seemed to be ok, but got stuck on the booting animation, and never got out of there.
I Had then to inject cwm with odin desktop, wiped data, cache anda dalvik, and then proceed to install the stock rom with desktop odin. All went well and the phone worked great.
I thought that maybe the problem was with mobile odin pro. So today, i went and proceeded to install Omega V35 via CWM. I again put the file on internal sd card, wiped data, cache and dalvik, and the rom started flashing. It all started good but, with no warning, at the mniddle of the installation, when applications were being installed, the phone went automatically and wuickly back to CWM!
Of course the installation wasnt finished, so i was stuck with cwm on reboot. Again made wipe data, cache and Dalvik, tried again to flash Omega V35, and again, the same problem...
In the end, i had to flash the stock rom again.
I searched the forum, but i cant seem to find the problem for this. I followed all the instructions, and had no error messages besides CWM skiping the format of the card, and some message (that i've seen in videos as normal), when wiping Dalvik!
Any clue to what's happening?
A clue read the instructions for the rom .
<b>Installation:Install CWM Recovery with Odin - Get CWM Recovery here
Boot to CWM Recovery using volume up, power button and home key
Backup your device and make sure to keep a copy of the backup to your pc!
Wipe data / factory reset (Not needed if you already have Omega)
Install Omega
(Wipe cache will be done automatically during installation so you can skip this step
Wipe dalvik cache will be done automatically during installation so you can skip this step)​</b>
JJEgan said:
A clue read the instructions for the rom .
<b>Installation:Install CWM Recovery with Odin - Get CWM Recovery here
Boot to CWM Recovery using volume up, power button and home key
Backup your device and make sure to keep a copy of the backup to your pc!
Wipe data / factory reset (Not needed if you already have Omega)
Install Omega
(Wipe cache will be done automatically during installation so you can skip this step
Wipe dalvik cache will be done automatically during installation so you can skip this step)​</b>
Click to expand...
Click to collapse
Maybe i didn't expressed myself correctly, but today i followed those instructions twice, and, at each of these tries the
same thing happened. When the flashing was running apparently problemless it simply stoped and went to CWM without rebooting.
rebentador said:
Maybe i didn't expressed myself correctly, but today i followed those instructions twice, and, at each of these tries the
same thing happened. When the flashing was running apparently problemless it simply stoped and went to CWM without rebooting.
Click to expand...
Click to collapse
Maybe The File Is Damaged Try To Download Again, Check MD5 Before Flashing
THE.W!ZARD said:
Maybe The File Is Damaged Try To Download Again, Check MD5 Before Flashing
Click to expand...
Click to collapse
I had already checked the md5, and the file is ok...
When you try to flash it through cwm recovery what error do you get while flashing?
Sent from my GT-I9300 using xda premium
Amritttt said:
When you try to flash it through cwm recovery what error do you get while flashing?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
None whatsoever. The flashing process seems to be running ok, It starts, i select default instalation, after i can see the apps being installed and suddenly, it all stops and goes into cwm without any message or warning...

Categories

Resources