i recently flash the ginger dx rom, but when i hit the reboot option on the recovery after flashing it, the phone won't start :S it keeps showing me an screen after the letter "sony ericsson" where only shows four distortioned orange androids, and after that the phone reboot itself and never start, is it brick or what? what can i do?? please help me! i don't have the bootloader unlock, and that rom says it work with the stock kernel, so i don't know whats going on
sorry, the problem was that i flash an x8 rom on my x10 mini pro :S i didn't see that when i was doing that :O..is the phone bricked? what can i do then?
try going to flash mode. mount your sd card copy the right rom and flash the right one.
demoniacs said:
try going to flash mode. mount your sd card copy the right rom and flash the right one.
Click to expand...
Click to collapse
but the problem is that i can't can enter recovery, or flash mode is other way? how can i enter flash mode?..because went i turn on the phone, and the letter sony ericsson appears, you suppose to hit the back key repeaditly, but nothing happens when i do that, it just appears the orange android i mentioned before
oh and sorry for the english XD
When you turn on the phone hold the back button
Sent from my U20i using XDA
Connect the phone on the PC when. You connect it press the power the home and the back buttons the same time when the phone is rebooting release the power and the home buttons but still pressing the back button and you can enter in the flash mode and use the flash tool to get your phone normally
Sent from my E10i using xda premium
Related
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
jakadewantara said:
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
Click to expand...
Click to collapse
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
try thread from DoomLORD : [DEV][How-To] Get Back to Stock Even With Broken / Damaged USB Port in http://forum.xda-developers.com/showthread.php?t=1054818
tarzerixx said:
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
Click to expand...
Click to collapse
Likely the USB port is dead and you have to send it in for repair.
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
pccobra said:
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
Click to expand...
Click to collapse
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
RedAxe said:
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
Click to expand...
Click to collapse
Hapenned the same to me...
I try to follow the steps, but i can't pass step 4 (it's unavaiable the "clean cache" bottom...)
Please help...
Restore original firmware with SEUS
RedAxe said:
...then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen...
Click to expand...
Click to collapse
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
do u have trick for my problem here forum.xda-developers.com/showthread.php?t=1388476
my x10 just vibrate once and stack on blank screen.
Sent from my X10i using Tapatalk
When I use SEUS It keep saying "You have the newest software available"
I tried the hard reset and all. The phone now just won't start at all
Hi,
i got the same problem what you describe ive stuck at the SE logo and cant get into recovery and i cant use flashtool. i tried to do what you say in the first post, but when i press the shell root button, it says "wait for device" then its not responding, and i cant moce on to the next step... what should i do now?
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
u totally saved me =D
X10 mini revived!
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
cruzstar said:
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
Click to expand...
Click to collapse
Update phone using SEUS....
Just google SUES
Definitely it will work....
Sent from my X10i using xda premium
yea i have use the SEUS..by pressing the back button..but it dont work..plz help me
Dear sir i already done that procedures but no use in seus shown u already updater software. plz help me
Cannot unbrick xperia mini E10i
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
Hello Guys,
I need your urgent help.
I cannot restore phone with SEUS or Companion. It says I already have the soft.
Getting fatal errors in Flashtool, I am stuck with SE logo and bootloader relocked.
I have the stock kernel but CM7 ROM.
Do you have any other ideas?
Tanks a lot!
deBelch said:
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
Click to expand...
Click to collapse
nope...didnt work...there is NO Install beneath...wonder why? is it i am using the latest SEUS?
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few seconds it boot automatically. and when i try to flash anything it boot automatically. please help me
---------- Post added at 12:21 AM ---------- Previous post was at 12:16 AM ----------
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few minutes it boot automatically. and when i try to flash anything it boot automatically. please help me
i use xrecovery to upgrade my x10 mini but it fails and my cell only showing logo and not turning of.tell me what can i do to ok my cell
Rajat46100 said:
i use xrecovery to upgrade my x10 mini but it fails and my cell only showing logo and not turning of.tell me what can i do to ok my cell
Click to expand...
Click to collapse
have u backed up your previous stock rom using recovery.
if yes try hot reboot (i.e., holding the middle button and simltaneously press the power button on the top) u will be able to reboot ur phone and restore the image of the back up using recovery. and ur done.
this is the problem with x recovery,next time you should use CWM recovery which doesnt show such problem
if you havent back up use seus to restore.
I tried to flash nAa kernel(unlocked bootloader successfully before) with flashtool and flastool said it succeed. When i reboot my phone it comes up with nAa kernel screen and reboots again. It goes into an infinite loop within rebooting phone, only showing nAa kernel splash screen, nothing more and reboot. I can reach to cwm recovery. I flashed the latest MiniCM7-2.2.0 custom rom and wiped user data/cache. Same problem remained.
I decided to go back the original stock kernel and rom via flashtool. You know the rest; you select the stock files then press ok then it says "oh, ungplug usb, power off, hold back button and plug in usb again". I did this steps several times but flashtool cant recognize my phone. Not even a blink. The weird thing is, when i power off my phone and plugin usb(not doing the holding back button thing) the green light is on(it is not offline charging i know it) same as it goes into flashmode. I tried flashtool again with hope but couldnt recognized phone again. Even S1 tool cant recognize my phone. It seems completly lost!
I tried hopelessly with Pc Companion and get the same result. I found a post about "Gordons Gate Driver" but couldnt get any result with that. No tool can recognize my phone in flashmode, in normal mode(talking about the infinite rebooting state, not even a blink from flashtool).
Im out of ideas, even out of google . Is there someone to provide me with new idea? Or is there something im missing? Please help.
Thank you for reading my adventure hope someone helps.
mertmr said:
I tried to flash nAa kernel(unlocked bootloader successfully before) with flashtool and flastool said it succeed. When i reboot my phone it comes up with nAa kernel screen and reboots again. It goes into an infinite loop within rebooting phone, only showing nAa kernel splash screen, nothing more and reboot. I can reach to cwm recovery. I flashed the latest MiniCM7-2.2.0 custom rom and wiped user data/cache. Same problem remained.
I decided to go back the original stock kernel and rom via flashtool. You know the rest; you select the stock files then press ok then it says "oh, ungplug usb, power off, hold back button and plug in usb again". I did this steps several times but flashtool cant recognize my phone. Not even a blink. The weird thing is, when i power off my phone and plugin usb(not doing the holding back button thing) the green light is on(it is not offline charging i know it) same as it goes into flashmode. I tried flashtool again with hope but couldnt recognized phone again. Even S1 tool cant recognize my phone. It seems completly lost!
I tried hopelessly with Pc Companion and get the same result. I found a post about "Gordons Gate Driver" but couldnt get any result with that. No tool can recognize my phone in flashmode, in normal mode(talking about the infinite rebooting state, not even a blink from flashtool).
Im out of ideas, even out of google . Is there someone to provide me with new idea? Or is there something im missing? Please help.
Thank you for reading my adventure hope someone helps.
Click to expand...
Click to collapse
back button is for x10 mini pro,
for my LWW and also mini it is volume down button to connect to flashtool.. try that
gandhar said:
back button is for x10 mini pro,
for my LWW and also mini it is volume down button to connect to flashtool.. try that
Click to expand...
Click to collapse
I even saw and tried that
You did not mention the model of your phone.
Always mention the model when posting.
In 2011 devices:
Press Volume DOWN key for flashmode(for flashing firmware via flashtool)
Press Volume UP key for fastboot mode(for flashing kernel)
mertmr said:
I even saw and tried that
Click to expand...
Click to collapse
does fastboot work?
singh_dd93 said:
You did not mention the model of your phone.
Always mention the model when posting.
In 2011 devices:
Press Volume DOWN key for flashmode(for flashing firmware via flashtool)
Press Volume UP key for fastboot mode(for flashing kernel)
Click to expand...
Click to collapse
I did mention that it is a mini pro in the title. Is there any other model info other than "mini pro", i dont know? I only know that it is a x10 mini pro.
I only know about back button thing, now trying the volume down key. Thanks for the tips.
gandhar said:
does fastboot work?
Click to expand...
Click to collapse
Nope, it didnt work too. I will give another shot, i guess.
--------------------
Edit: Nothing happens. When i plug my phone with holding button(back, volume up or down) green led turns on. But flashtool(or others) says nothing. By the way, computer cant detect my phone too.
mertmr said:
Nothing happens. When i plug my phone with holding button(back, volume up or down) green led turns on. But flashtool(or others) says nothing. By the way, computer cant detect my phone too.
Click to expand...
Click to collapse
this is the same computer that you used to flash the kernel right?
gandhar said:
this is the same computer that you used to flash the kernel right?
Click to expand...
Click to collapse
Yes, it is.
By the way the weird thing happened. I changed the usb port i connect my phone and suddenly flashtool detected my phone! I flashed the orginal firmware and now it is working! Thanks for the efforts you gave.
mertmr said:
Yes, it is.
By the way the weird thing happened. I changed the usb port i connect my phone and suddenly flashtool detected my phone! I flashed the orginal firmware and now it is working! Thanks for the efforts you gave.
Click to expand...
Click to collapse
yeah someone else too had a similar problem.. something about usb3.0
anyway congrats now
Congrats for your phone
There are 2 mini pro thats the reason i asked
1) x10 mini pro - released in 2010
2) xperia mini pro - released in 11
X10 series have a different forum
Sent from my Xperia Mini using XDA
singh_dd93 said:
Congrats for your phone
There are 2 mini pro thats the reason i asked
1) x10 mini pro - released in 2010
2) xperia mini pro - released in 11
X10 series have a different forum
Click to expand...
Click to collapse
Ok, thanks for the info. I will be carefull about that.
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
which firmware you are wrong installed. ROM or kernel.
ramimos said:
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
Click to expand...
Click to collapse
In flashtool...... select correct firmware and press flash button..then connect it phone and press and hold power+vol down+menu button until the green light on top flashes...then you firmware will be flashed...
Sent from my HTC One X using xda premium
nothing happens
when i use the POWER+VOL DOWN+MENU buttons....
So
I managed to hold together the HOME+BACK button and then pushed the POWER button and flashed the E10i 2.1.1 A.0.6 firmware!!!!
while doing it, i noticed for a meesage that the phone is not rooted.
upon finishing the flashing, the phone doesnt boot up, i managed to see the green light and thats all.
i also downloaded the S1 tool in order to root the phone but it says that it can not detect the phone....
what should i do now?
update #2
phone doesnt boot up.
when i connect the flashtool i get the message "Device connected in flash mode".
how to continue from that point ?
ramimos said:
phone doesnt boot up.
when i connect the flashtool i get the message "Device connected in flash mode".
how to continue from that point ?
Click to expand...
Click to collapse
Use Sony Ericsson Update Service Repair function! That will work....
ramimos said:
I managed to hold together the HOME+BACK button and then pushed the POWER button and flashed the E10i 2.1.1 A.0.6 firmware!!!!
while doing it, i noticed for a meesage that the phone is not rooted.
upon finishing the flashing, the phone doesnt boot up, i managed to see the green light and thats all.
i also downloaded the S1 tool in order to root the phone but it says that it can not detect the phone....
what should i do now?
Click to expand...
Click to collapse
There is no need for rooting to flash firmware using flashtool....make sure u r flashing correct firmware
Sent from my HTC One X using xda premium
Hi, i just unlocked the bootloader on my Sony Xperia S, installed ClockworkMod recovery and now I am getting a boot loop. I cant turn off the phone, it only gives me an option to reboot CWM.
(I am currently downloading CM9 to flash it). It says on the tutorial to transfer the zip files to the SD card of my phone, But how can I do that, I cant access the internal storage of my phone using a USB cord. The PC cannot detect the phone.)
I need your help badly! I dont want to brick my phone! Thanks!
Download advanced stock kernel from the development forum and fastboot it from your pc and see what happens
Sent from my LT26i using Tapatalk 2
How can i fastboot, there's no option to turn off the phone, im stuck on CWM logo! with small texts/configuration settings above it
cybrkada said:
Hi, i just unlocked the bootloader on my Sony Xperia S, installed ClockworkMod recovery and now I am getting a boot loop. I cant turn off the phone, it only gives me an option to reboot CWM.
(I am currently downloading CM9 to flash it). It says on the tutorial to transfer the zip files to the SD card of my phone, But how can I do that, I cant access the internal storage of my phone using a USB cord. The PC cannot detect the phone.)
I need your help badly! I dont want to brick my phone! Thanks!
Click to expand...
Click to collapse
Already replied in ur post pls check der!!
Both how to switch off and to flash with custom kernel with CMW..
yeah i downloaded ICS custom kernel but i cant boot to fastboot, i cant turn off the phone, im stuck with CWM, it will only reboot CWM, no option to shutdown phone
cybrkada said:
yeah i downloaded ICS custom kernel but i cant boot to fastboot, i cant turn off the phone, im stuck with CWM, it will only reboot CWM, no option to shutdown phone
Click to expand...
Click to collapse
If the battery is removable then remove it orelse hold and press volume + and power button till the phone vibrates once and switches off or
Keep pressing till it vibrates 3 times and the phone switches off
soulhackereborn said:
If the battery is removable then remove it orelse hold and press volume + and power button till the phone vibrates once and switches off or
Keep pressing till it vibrates 3 times and the phone switches off
Click to expand...
Click to collapse
It worked, case solved! kernel issue resolved too! i owe you many LOL!
cybrkada said:
It worked, case solved! kernel issue resolved too! i owe you many LOL!
Click to expand...
Click to collapse
Lol enjoi!!