Android market problem with incompatibile with device or with density - Android Q&A, Help & Troubleshooting

I had problem with compatibile density in my phone (HTC DHD), I use IceColdSandwich - 7.4 - AOKP and I change the density from 240 to 190, then I get issue with download app form Google Play/ Android market, soo I've read many helps forum to fix it!
So now I want to help You:
What You need:
LCD Density Modder Pro works excelent!
(in download section)
in option of program:
- set the LCD Density to Your favourite
- click - 'Fix Market Compatibilty Issues'
OPTION 1
Read this, If You don't know what You do:
- go to 'Temp Fix' bookmark:
- 'Clear Market Data'
- Choose the DPI value to cheat the market/google store
- click 'Temp'
- reboot
- check in google play that can You already download the apk, which one You can't download before
OPTION 2
Do this if You know what You do and known the risk
- in 'Permanent Mod'
- look on option '2' and change the DPI value to lower than You have (example, I have 190 DPI, so I changed it to MDPI-160)
- use option '3' Download Modded Play Store
- use option '4', Download Modded GSF
- reboot & enjoy
Other option
FIX only for ISC
Download the pack GPlay-DPI-Fix-3519.zip and flash it by 4EXT or CWM.
It's a googlePlay app, but it's moddified for all density.
I'm not responsibble for damage or crash

No longer a solution
zomer331 said:
I had problem with compatibile density in my phone (HTC DHD), I use IceColdSandwich - 7.4 - AOKP and I change the density from 240 to 190, then I get issue with download app form Google Play/ Android market, soo I've read many helps forum to fix it!
So now I want to help You:
What You need:
LCD Density Modder Pro works excelent!
for example:
Download the program from somewhere (4shared or else)
in option of program:
- set the LCD Density to Your favourite
- click - 'Fix Market Compatibilty Issues'
OPTION 1
Read this, If You don't know what You do:
- go to 'Temp Fix' bookmark:
- 'Clear Market Data'
- Choose the DPI value to cheat the market/google store
- click 'Temp'
- reboot
- check in google play that can You already download the apk, which one You can't download before
OPTION 2
Do this if You know what You do and known the risk
- in 'Permanent Mod'
- look on option '2' and change the DPI value to lower than You have (example, I have 190 DPI, so I changed it to MDPI-160)
- use option '3' Download Modded Play Store
- use option '4', Download Modded GSF
- reboot & enjoy
I'm not responsibble for damage or crash
Click to expand...
Click to collapse
This app is no longer a solution as they BirdAPI has not updated their modded PLAY app post version 3.15 in March 2012. Current Google PLAY version is 3.19 hence modded app doesn't work anymore.
The developer doesn't respond to emails anymore.

uploaded

Related

[UTIL] | 2.1 Customizer v0.99.1 (Nov18 Root, Backup, NoJunk, Fonts, ToggleJITv002)

The README File. Important Read:
Code:
################################################################################
# #
# x10 After-Root Optimiser #
# by ttxdragon #
# README FIRST! #
# #
################################################################################
Index:
1. WARNINGS!!
2. Configuration
-> Important Info
a. JITv002
b. Density Changer
3. How-To Use This.
4. Credits
1. WARNINGS!!
a. I'm not reponsible for any damage to your device. You should always be
able to just re-flash your device, but who knows wth can go wrong.
This is provided as is without any guarantees.
b. DO NOT EDIT THE DEFAULT CONFIGURATION FILES MANUALLY UNLESS YOU KNOW
WHAT YOU'RE DOING! Everything that the config files contain is easily
edited by using the default-configuration as base in the task-editor.
2. Configuration
Follow the steps on screen in the task. It'll ask you a lot of stuff, but
don't worry, it should be extremely clear what you are selecting on.
Important info:
JITv002:
Users of x10a firmware have reported issues with JIT more often than
those using x10i. x10 SO-01B firmware doesn't work with JIT at all.
Furthermore, JIT is only useful to be enabled on SE Roms. Custom ROMs
will have JIT already enabled.
Density Changer:
The default configuration changes the Density to 200, down from 240.
It basically makes everything smaller on screen. Some applications
might not work properly with the new size (because the developers
thought it'd be a great idea to not code the program flexibly
enough to scale nicely)
You can always just set it back to 240 if you decide that's better
for you.
3. How-To: Use This
Requirements: a. Windows or Linux PC,
Ubuntu Linux 10.10 Recommended
@MAC Folks: Don't have one, can't test. feel free to
submit patches/make own version
Usage: 1. Enable USB Debuggin in
Settings -> Applications -> Development
2. Plug in USB Cable
3. On Windows: Run RunMeWindows.bat
On Linux : Run RunMeLinux.sh
4. Follow On-screen instructions.
4. Credits
x10dev-team for tirelessly working to free our x10's
z4mod team for z4root
Cygwin team for developing this GPL'd port of unix utilities to Windows.
( For License and Source-code of Cygwin visit http://www.cygwin.com/ )
CHANGELOG:
Code:
v0.99.1 [2010-11-18]
- Fix JIT installation/un-installation bug
- Fix Config Selection bug
- Add "Install extra System Applications" Option
- Add "AppWidgetPicker 1.2.1" to extra system apps
- Add "Wallpaper Set and Save" to replacement apps
v0.99 [2010-11-17]
- Almost complete Rewrite
- Better output
- Add Root-method
- Allow for custom configurations
- Allow for multiple configurations
- More flexible for easy feature-addons
- Configuration now inside program.
v0.2 [2010-11-10]
- Fix "Space in Path" Bug
- Fix "OS Detection" Bug
- Add "cancel" option before running script on phone
- Move backup folder from /sdcard/post-root/backup to /sdcard/prbackup
- Always push fresh configuration to phone (deletes old config on phone)
- Updated AlarmClock Plus to LCD Density friendly version
v0.1 [2010-11-09]
- Fix Busybox installation
- Add LCD Density Changing Option
v0.0 [2010-11-09]
- Initial Release
To-do List:
- Make Cygwin a Windows-Only Download happening at runtime
- Make useful for Custom Roms -- if possible/wanted.
Download Links:
v0.99.1
Multiupload || DepositFiles
(Please use Multiupload where possible, so that I can have some stats )
Extra Information on what system programs can be removed/replaced from a SE ROM
ttxdragon said:
Directly Replaced by Other apps
Alarm Clock -> Alarm Clock Plus v2
apk: AlarmClock
Browser -> Dolphin HD
apk: SemcBrowser
Drawbacks:
Some Applications are hardcoded to use the browser and won't work without it.
Example: DoCoMo Market
Calculator -> RealCalc
apk: Calculator
Email, Gmail -> K-9Mail
apk: Gmail GmailProvider SemcEmailLargeui
Drawbacks:
Gmail: Some applications don't support K-9Mail for pulling email-info
Examples are Executive Assistant, Pure Messenger Widget
Email: In the Phonebook Email Tab "Write New" doesn't work anymore.
Workaround -> Clicking mail-address in main-view works.
SE Launcher -> ADWLauncher
apk: SemcHomeL
Bloatware
Nordic Apps (Only in Generic Nordic ROM)
/system/etc/customization/applications/Supernytt.apk
/system/app/Telenor_Wrapper.apk
/data/app/com.apegroup.aftonbladet.supernytt.zip
/data/app-private/com.apegroup.aftonbladet.supernytt.apk
Backup And Restore
apk: backupandrestore
Documentation
apk: EManualLauncher EManual usersupport
Creatouch (SE)
apk: creatouch
DebugHelper (Service)
apk: CrashSMS
Digital Clock (Widget)
apk: DigitalClockWidget
Facebook (Client)
apk: facebook
Face Recognition (Service for Camera)
apk: FaceRecognition
Drawbacks:
Face Recognition doesn't work anymore
Learning Client (Service)
apk: LearningClient
Drawbacks:
Word-Learning for the default keyboards is removed.
Live Wallpapers (Wallpapers only)
apk: LiveWallpapers MagicSmokeWallpapers VisualizationWallpapers
Drawbacks:
Only Google Maps Live-wallpaper left
but market live-wallpapers still work
MediaScape
apk: mediascape MediaScapePluginManager
Drawbacks:
Camera App is hard-coded to use Mediascape for Gallery/Share.
Vignette Does well but doesn't help in Video mode.
Means: No easy sharing/viewing for taken videos
No easy way to create a wallpaper from taken pictures.
No way to set contact picture from phonebook. Need to go through Gallery3D instead.
MoxierMail
apk: moxiermail
Music Player (Hidden)
apk: Music.apk
OfficeSuite
apk: officesuite
PC Companion (PC-Sync Service)
apk: PcCompanion
PlayNow
apk: playnow*
Quadrapop (Game)
apk: quadrapop
Recent Calls (Widget)
apk: RecentCalls
Status Switch (Widget)
apk: StatusSwitch
Sony Ericsson Synchronisation
apk: Sync SyncWizard OmaDatasyncService
Search (Widget)
apk: SearchWidget
SetupWizard
apk: SEMCSetupWizard
TimeScape
apk: Timescape* TimeScape*
TrackID
apk: trackid
Voice Dialer
apk: VoiceDialer
Wallpaper Chooser (Selector in Titanium)
apk: Wallpaper Chooser
standard wallpapers: /etc/customization/content/com/sonyericsson/android/wallpaperchooser/wallpaper/
Drawbacks:
No Standard Wallpapers available anymore
Workaround: Get "Wallpaper Set and Save" from Market
Wisepilot
apk: wisepilot
YouTube
apk: YouTube
Excess Keyboards
Note: Keep one of these around, so you can type Or install some Keyboard from the Market before you remove these.
SE Default English
apk: textinput-tng
Chinese
apk: chinesetextinput
Danish
apk: Danish_Keyboard
English
apk: LatinIME
Korean
apk: SEMCTouchPalKoreanQWERTY
Japanese
apk: JapaneseIME
Click to expand...
Click to collapse
Thank you very much but why deleting all the keyboards ?
Not everybody wants to keep any of them. I personally only keep the JP one (and install swype per custom-folder) because I haven't looked for a better JP one yet. And as a little hurdle for those that don't care to read. This is supposed to be configured to everyone's own needs, not to what I dictate, else it would just be scripts without a config-folder
So if i don't want ie the english keyboard to be removed i just remove the English file from the Clean Keyboards ?
Indeed.
It only removes those that have files in the folders.
If you want to keep all, remove the whole directory.
If you want to keep only english, just remove the English file.
It's kinda weird because the .bat went fine, closed and my phone rebooted but the fonts didn't change ,there were no amelioration of Quadrant's score and it's a bit laggy. But the replacements apps ect... are here so I don't know what went wrong :/
Can you pull the log files from your phone? (in /sdcard/post-root/logs) and post then zipped or pastebin them?
My phone went up to almost 700 on second quadrant-run after another reboot (I had one run with 400 before that reboot, one with 620 or so after it)
And that's with a lot of other junk installed.
Well I ran it a second time and same, I can't seem to mount my SD Card, I click on mount and it does nothing... I had this a problem a long long time ago and had to reflash the phone...
EDIT : it just mounted without me touching anything.
Here is the log
can you do adb pull /sdcard/post-root/logs in a cmd in the program folder from the extracted zip?
I zipped all the files there was in logs is it ok ?
Thanks =)
Seems I might've overlooked something simple.
I'm reflashing my phone again, atm.
As a quick fix for now:
install busybox from market, install the git-version and then run the scripts again
that *should* fix it, unless I overlooked something.
What do you mean by git-version ?
EDIT : Nevermind. I'm re-doing the .bat
Well it worked like a charm ! Thank you ttxdragon, the installation was way faster than before and the fonts worked.
Quadrant score : 575 at the first boot, i'm rebooting atm
698 after !
i cant do it :S
it always says that any device had been found
Jonika21 said:
i cant do it :S
it always says that any device had been found
Click to expand...
Click to collapse
You need your phone to be turned on and USB Debugging also with of course the usb wire plugged to your phone.
If all of those things are done it should not display that.
debug mode... xD
problem solved
zyryck said:
What do you mean by git-version ?
EDIT : Nevermind. I'm re-doing the .bat
Well it worked like a charm ! Thank you ttxdragon, the installation was way faster than before and the fonts worked.
Quadrant score : 575 at the first boot, i'm rebooting atm
Click to expand...
Click to collapse
Glad it worked.
Uploaded v0.1 -- Now it should work even without installing busybox from market first.
I was being an idiot...
Thank you very much for this optimizer, works like a charm
Quadrant score - 699.
One question though. I used the v0.0, and I'm not a fun on the LCD Change, so I'd like to know if I just remove the file as stated in v0.1, will it make it 240 as before?
quadrant score - 673
nice work !
Yes, it would change the Density back. It'll do everything over again, including the JIT (in which step the density gets changed, too)
Glad it worked for you =)
you can simply download from market lcd density. you will find 3 programs, choose the free one, and change to 240..
i've done that, it worked
sorry my bad english xp

StreakDroid 1.7.0 ( aka HD7 Edition ) Release Post

StreakDroid 1.7.0 ( aka HD7 Edition ) Release Post
Official StreakDroid Website:StreakDroid.comhttp://streakdroid.com​
I HAVE REMOVED FRING SUPPORT FROM THIS BUILD FROM NOW ON, IM SICK OF WASTING 2 DAYS FIXING THE FRAMEWORKS TO ALLOW FRING TO WORK, IF YOU WANT FRING SUPPORT GO COMPLAIN TO THEM (@FRING ON TWITTER ALSO)
This Release Version incorporates changes in the INSTALLATION PROCESS, please read the options available to you and the correct method of applying them before proceeding to flash the 1.7 Zip File!
( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)
PERFMOD IS NOT enabled by default in this version, had some reports of stabily problems but their is now an installer option to reenable it if you wish, if you choose not to enable the installer will automaticly trasfer your data back to save a reset
also lots of other little tweaks been added
1.0 > INSTALLATION CHANGES :
With 1.7, several choices must be made before flashing the Zip file via StreakMod or Clockwork Recovery. These choices are made with very simple edits to a Text file ( explained in section 1.2 below )
Important Options Available ( other options are listed below in Section 1.1 ) -
A.Rebel SIM Compatibility : Users who previously downloaded the NOBB version of the file may now simply select the option by typing it into the text file before flashing the Zip. Please note that Rebel SIM users are still required to manually Fastboot flash the 2.1 8105 Baseband for compatibility.
B.Launcher Option : Users may now select their default Launcher of choice before installation. The options available are LauncherPro, ADW, Stage UI and GingerBread Launcher. GingerBread launcher is installed by default if nothing is chosen.
C.Pixel/LCD Density : Default LCD Density can be set during Installation. Values available for selection are : 120,140,180,200 and 240 DPI.
D.Other Settings : Other settings available include -
•Volume Boost
( flashes the A Modified kernel with louder volume hack ),
•Tabmail
( installs the Galaxy Tab Email Client port beta 2 instead of stock email client ),
•Teetermod
( installs Teetermod edit to get HTC Teeter working, installs the app and a modified build prop with 240dpi lcd density )
•us120/140/180/200/240 -
(installs build.prop with USA related Region Settings and an LCD Density of 120140/180/200/240)
•bios
( installs the Streak BIOS Bootanimation )
•noapps
(this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher)
1.1 > INSTALLATION HOW TO
A. You will need to create a text file on your Streak's MicroSD Card. The file can be created in your Text Editor of choice ( such as Notepad ).
B.This file will be called 'install.txt' - Ensure that this is the exact syntax and that the file is saved with a '.txt' suffix.
C.This file must be saved in the root of the sd card.
E.Inside this text file, you may type each option that you select on a separate line. All the options available to you are listed below. Here is an example :
Code:
adwlauncher
volboost
tabmail
bios
That is it. You can save this text file as install.cfg
You will then boot into recovery ( StreakMod or Clockwork ) and begin the Zip file installation process as usual.
! The full list of Options available are as follows :
Code:
noapps - this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher
adwlauncher - this installs adw launcher and removes the default gingerbread launcher
launcherpro - this installs launcherpro and removes gingerbread launcher
stageui - this installs dells Stage UI and removes the gb launcher
density120 - sets lcd_density to 120 by default
density140 - sets lcd_density to 140 by default
density180 - sets lcd_density to 180 by default
density200 - sets lcd_density to 200 by default
density240 - sets lcd_density to 240 by default
transparent - restores the 1.5.3 transparent statusbar, which is partially disabled by default
nobaseband - installs the required libs for using a rebelsim
volboost - flashes a new super volume boost kernel
tabmail - installs the Galaxy Tab Email Client port beta 2 instead of stock email client
teetermod - installs teetermod edit to get htc teeter working, installs the app and a modified build prop with 240dpi lcd density
us120 - installs build.prop with usa related region settings (LCD Density of 120)
us140 - installs build.prop with usa related region settings (LCD Density of 140)
us160 - installs build.prop with usa related region settings (LCD Density of 160)
us180 - installs build.prop with usa related region settings (LCD Density of 180)
us200 - installs build.prop with usa related region settings (LCD Density of 200)
us240 - installs build.prop with usa related region settings (LCD Density of 240)
bios - installs the Streak BIOS Bootanimation thanks to Fone_Fanatic and Frysee
noswype - removes the preinstalled swype install to allow swype beta to work
zeam - installs the zeam launcher, a free open source launcher designed to be small and fast.
gbkb - installs Gingerbread keyboard instead of stock keyboard, this will cause force close in dictionary settings
perfmod - Enables the 1.6.1 Perfmod Option, disabled by default due to possible problems
stockphone - restores the stock phone/contacts apps rather than the new streak 7 versions
2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS
1.Download Update-1.7.0.zip from the links below
2.Place Zip file into Root of SD Card
3.Make a text file and type in the options you would like to chose as shown above.
4.Save file under SDCard>install.txt
5.Boot into StreakMod or Clockwork Recovery
6.Select Update from Zip File > Select Zip File From SD Card > StreakDroid_1-7.Zip
7.Wait for installation.
8.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
9.Enjoy.
Most Recent Version: v1.7.0
Known Issues:
Accelerometer is dodgy at times but I cant pin down the issue - usually going into Settings > Display and toggling Auto Rotate on and off fixes
-----------------
Changelogs
-----------------
UPDATE 05/02/2011
Version 1.7.0 AKA HD7 Edition
• Replaced some aging libs and frameworks with new ones from dell 322 offical, probably fix some audio issues
• Fixed HDMI output (see note below)
• Added GScript
• Removed Perfmod by default due to some instability discovered
• Added New Keyboard and Langs from official 322 build
• Updated all apps to latest
• Fixed transparent notification bar to new icons etc
• Fixed kang-o-rama live wallpapers
• Updated stageui to version from streak 7 (no huge changes though)
• Slackerradio from streak 7 added
• Removed live wallpapers that are not full screen
• FRING FRONT FACING CAMERA SUPPORT HAS BEEN REMOVED PERMANENTLY, START ARGUING WITH FRINGS DEV IF YOU HAVE A PROBLEM WITH THIS
• Rebuilt theme from scratch, works better now, removed borked batt percentage,
• Changed fonts to much nicer looking one
• Added microbes live wallpaper
• Added fards tweaked libskia libs to fix some websites dying
• Hopefully vplayer is now fixed
• Facebook sync confirmed working
• Tweaked the browser and phone icons to match gb theme .
• Finally managed to fix the phone app in lcd densitys other than 160 - thanks to the dell streak 7 dump for this
• Added an auto transfer feature to move from 1.6.1 with perfmod to stock 170 without
• Reverted Some 3D Tweaks made in 1.6.x causing Gameloft games to fail
UPDATE 22/1/2011
Version 1.6.1 AKA ITS OVER 3 THOUSAND
• Updated libs to fix oovoo
• Updated volboost kernel to new version
• Fixed some installer issues
• Added gopus battery icon, modified colors
• Made settings > about > System Update work for updating streakdroid roms (yes you can check for updates direct from your streak
• Added a Noswype installer option to remove the preinstalled swype
• Added zeam launcher
• Fixed fc's in settings
• Added HEAVILY Tweaked Performance Mod data2ext Tweak, using just the streaks internal sd card now no need for changing things on external sd
• Added an option to install gingerbread keyboard instead of stock keyboard - dictionary settings force closes with gingerbread keyboard installed
• Added Live Wallpaper From Nexus S
UPDATE 10/1/2011
Version 1.6.0 AKA Install-o-Rama
• Added heavily modified advanced installer thanks to kang-o-rama mod for nexus one.
• Changed theme to add black statusbar due to transparancy issues
• Fring support available through installer
• Transparancy available through installer
• Changing lcd density available via installer
• Baseband/nobaseband via installer
• Re-enable old louder volume kernel
• Teetermod via installer
• Enable galaxy tab email client via installer
• USA region settings in build prop via installer
• New kernel with some perf changes, cfq reenabled
• Bios animation bootscreen chooseable via installer
NOTE: for HDMI to work you must run gscript and load the 2 files from your memory card (the rom will of created a gscript folder containingthem) then run the hdmi output on script before trying video, once you are done either reboot or run the hdmi off script
this is due to one of the performance tweaks interfering with hdmi
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
[/quote]
Rom Download Links:
Primary Download Site: http://mirror2.streakdroid.com/update-1.7.0.zip
Mirror 1: http://www.android-roms.com/downloads/upda...pdate-1.7.0.zip
Mirror 2: http://downloads.streakdroid.com/djsteve/update-1.7.0.zip
IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+
Baseband File Download:
Primary Download Site: http://downloads.streakdroid.com/djsteve/amss.mbn
Mirror 1: http://www.android-roms.com/downloads/updates/amss.mbn
Mirror 2: http://mirror2.streakdroid.com/amss.mbn
VPN USERS: TUN.KO IS INCLUDED IN THE ROM ALREADY - LOOK IN /SYSTEM/LIB/MODULES.
if you have NOT already flashed the dell 2.2 pkg or my 720p fix you need this to fix 720p video - otherwise ignore
http://downloads.streakdroid.com/testing/dsp1.mbn
flash this using the fastboot command fastboot -i 0x413c flash dsp1 dsp1.mbn
Thanks to:
Everyone for suggesting things they want adding
Kang-O-Rama Rom Maker for nexus one for allowing me to use his advanced installer
omca & xplanet hosting for providing additional mirrors
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
android-roms for the mirror
Vinokirk for helping diagnose and sort out 2.1 baseband ril support and gps
Andycap & fards for providing modified Gps.conf
homeiss forthe excellent upgrade/downgrade guide
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
If a different density is selected, will we still got FCs like we do now? Meaning, has the ui been modified and scaled for different densitys?
Sent from my Dell Streak using XDA App
no, ive been looking at changing the dialer but any change kills the phone modem for some reason, still investigating
There is a folder named android already on my sd card do I use that one to put streakdroid?
Sent from the Iphone Killer
yea you can put folder into that
Why do I keep getting no download directory found? Nevermind I had the streak connected to the USB of my PC. DUH!
Sent from the Iphone Killer
if i leave out the lcd density will i get default settings?
I feel kindof stupid asking this but how do you turn on auto rotate with the gingerbread launcher? It seems to be stuck in landscape for me (everything else auto rotates).
Ok I installed 1.6.0 but I did not get the options to change anything. I created the folder android>streakdroid>install.cfg with text options. Nothing happened when does the option suppose to pop up? This is what I put in the text file below. Do I need to put code box?
adwlauncher
volboost
tabmail
bios
borijess said:
Ok I installed 1.6.0 but I did not get the options to change anything. I created the folder android>streakdroid>install.cfg with text options. Nothing happened when does the option suppose to pop up?
Click to expand...
Click to collapse
Those are your options...
I am so excited to try out all of the OPTIONS! Thank you DJ Steve! US local customization has never been easier. We are all so grateful of your releases. Kang-o-rama was always a fun mod on the Nexus One. Would like to see ADW EX installer as an option maybe in the future
Haz anyone ran through this install for 1.6 with the White BestBuy Dell Streak that originally started with the 6601 build? Or does that not matter anymore? I am currently on StreakDroid 1.4.6 with StreakMod 3.2.6-beta.
thanks i just used stageui in the txt & everything seems to work fine
Wow quadrant scores have increased without overclocking. I am getting 1700 was getting 1400 with 1.5.3
Nevermind for some reason the text file did not save in the folder.
I’m thoroughly confused. I set 240 density but everything is absolutely massive in size using the Gingerbread launcher. >.>
Shouldn’t higher density = more stuff on screen?
no you have it backwards, lower=higher resolution
Stupid question but is it possible to backport the Gingerbread sip stack to use the built in sip function in Gingerbread?
I get my streak tomorrow but I don't think that is likely with this snow storm on the east coast.
Well then, time for another reinstall.
Wow quadrant scores have increased without overclocking. I am getting 1700 was getting 1400 with 1.5.3
Click to expand...
Click to collapse
ive tryed a few times & im just getting 1560s not overclocked
I tried to load it, but when i choose what i want and select zip, nothing happened, ROM loaded, but in default settings, but thank you, great ROM.

StreakDroid 1.8.1 ( aka Bug Extermination Edition ) Release Post

StreakDroid 1.8.1 ( aka Bug Extermination Edition ) Release Post
Official StreakDroid Website:StreakDroid.comhttp://streakdroid.com​
I HAVE REMOVED FRING SUPPORT FROM THIS BUILD FROM NOW ON, IM SICK OF WASTING 2 DAYS FIXING THE FRAMEWORKS TO ALLOW FRING TO WORK, IF YOU WANT FRING SUPPORT GO COMPLAIN TO THEM (@FRING ON TWITTER ALSO)
This Release Version incorporates changes in the INSTALLATION PROCESS, please read the options available to you and the correct method of applying them before proceeding to flash the 1.7 Zip File!
( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)
PERFMOD IS NOT enabled by default in this version, had some reports of stabily problems but their is now an installer option to reenable it if you wish, if you choose not to enable the installer will automaticly trasfer your data back to save a reset
also lots of other little tweaks been added
1.0 > INSTALLATION CHANGES :
With 1.8, several choices must be made before flashing the Zip file via StreakMod or Clockwork Recovery. These choices are made with very simple edits to a Text file ( explained in section 1.2 below )
Important Options Available ( other options are listed below in Section 1.1 ) -
A.Rebel SIM Compatibility : Users who previously downloaded the NOBB version of the file may now simply select the option by typing it into the text file before flashing the Zip. Please note that Rebel SIM users are still required to manually Fastboot flash the 2.1 8105 Baseband for compatibility.
B.Launcher Option : Users may now select their default Launcher of choice before installation. The options available are LauncherPro, ADW, Stage UI and GingerBread Launcher. GingerBread launcher is installed by default if nothing is chosen.
C.Pixel/LCD Density : Default LCD Density can be set during Installation. Values available for selection are : 120,140,180,200 and 240 DPI.
D.Other Settings : Other settings available include -
•Volume Boost
( flashes the A Modified kernel with louder volume hack ),
•Tabmail
( installs the Galaxy Tab Email Client port beta 2 instead of stock email client ),
•Teetermod
( installs Teetermod edit to get HTC Teeter working, installs the app and a modified build prop with 240dpi lcd density )
•us120/140/180/200/240 -
(installs build.prop with USA related Region Settings and an LCD Density of 120140/180/200/240)
•bios
( installs the Streak BIOS Bootanimation )
•noapps
(this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher)
1.1 > INSTALLATION HOW TO
A. You will need to create a text file on your Streak's MicroSD Card. The file can be created in your Text Editor of choice ( such as Notepad ).
B.This file will be called 'install.txt' - Ensure that this is the exact syntax and that the file is saved with a '.txt' suffix.
C.This file must be saved in the root of the sd card.
E.Inside this text file, you may type each option that you select on a separate line. All the options available to you are listed below. Here is an example :
Code:
adwlauncher
volboost
tabmail
bios
That is it. You can save this text file as install.txt
You will then boot into recovery ( StreakMod or Clockwork ) and begin the Zip file installation process as usual.
! The full list of Options available are as follows :
Code:
noapps - this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher
adwlauncher - this installs adw launcher and removes the default gingerbread launcher
launcherpro - this installs launcherpro and removes gingerbread launcher
stageui - this installs dells Stage UI and removes the gb launcher
density120 - sets lcd_density to 120 by default
density140 - sets lcd_density to 140 by default
density180 - sets lcd_density to 180 by default
density200 - sets lcd_density to 200 by default
density240 - sets lcd_density to 240 by default
transparent - restores the 1.5.3 transparent statusbar, which is partially disabled by default
nobaseband - installs the required libs for using a rebelsim
volboost - flashes a new super volume boost kernel - now with per page tables kgsl(3d) tweaks, may break gameloft games)
tabmail - installs the Galaxy Tab Email Client port beta 2 instead of stock email client
teetermod - installs teetermod edit to get htc teeter working, installs the app and a modified build prop with 240dpi lcd density
us120 - installs build.prop with usa related region settings (LCD Density of 120)
us140 - installs build.prop with usa related region settings (LCD Density of 140)
us160 - installs build.prop with usa related region settings (LCD Density of 160)
us180 - installs build.prop with usa related region settings (LCD Density of 180)
us200 - installs build.prop with usa related region settings (LCD Density of 200)
us240 - installs build.prop with usa related region settings (LCD Density of 240)
bios - installs the Streak BIOS Bootanimation thanks to Fone_Fanatic and Frysee
noswype - removes the preinstalled swype install to allow swype beta to work
zeam - installs the zeam launcher, a free open source launcher designed to be small and fast.
gbkb - installs Gingerbread keyboard instead of stock keyboard, this will cause force close in dictionary settings
perfmod - Enables the 1.6.1 Perfmod Option, disabled by default due to possible problems
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
tabletphone - installs the modified dellstreak7 dialer, this causes a graphical bug in recent calls list but works fine
161font - restores the fonts from 1.6.1
2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS
1.Download update-1.8.1.zip from the links below
2.Place Zip file into Root of SD Card
3.Make a text file and type in the options you would like to chose as shown above.
4.Save file under SDCard>install.txt
5.Boot into StreakMod or Clockwork Recovery
6.Select Update from Zip File > Select Zip File From SD Card > update-1.8.0.Zip
7.Wait for installation.
8.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
9.Enjoy.
Most Recent Version: v1.8.0
Known Issues:
Accelerometer is dodgy at times but I cant pin down the issue - usually going into Settings > Display and toggling Auto Rotate on and off fixes
-----------------
Changelogs
-----------------
UPDATE 23/02/2011
Version 1.8.1 AKA Bug Extermination Edition
• Reverted Some changes due to stability
• Reverted the 1.5ghz kernel due to issues with wifi.
UPDATE 23/02/2011
Version 1.8.0 AKA Chernobyl Meltdown Edition
• Reverted back to some of the older libs due to the random bugs
• Added honeycomb music player as default
• Tablet Phone App looks much nicer
• Updated honeycomb music
• Added new kernels and install options
• Added adhoc wifi support
• Added slight changes to statusbar
• Reverted to stock phone app due to issues with streak7 one, moved streak7 dialer to installer option instead, this has some graphical bugs but works fine
• Added new kernel with 1.5GHz Overclocking Ability !!!! - this may prove unstable so dont use permanently, 3d may also not work at full clock speed - not certain if it is actually overclocking to that speed either
• Added option to restore the fonts from 161 in installer
• Fixed the huge settings icons
UPDATE 05/02/2011
Version 1.7.0 AKA HD7 Edition
• Replaced some aging libs and frameworks with new ones from dell 322 offical, probably fix some audio issues
• Fixed HDMI output (see note below)
• Added GScript
• Removed Perfmod by default due to some instability discovered
• Added New Keyboard and Langs from official 322 build
• Updated all apps to latest
• Fixed transparent notification bar to new icons etc
• Fixed kang-o-rama live wallpapers
• Updated stageui to version from streak 7 (no huge changes though)
• Slackerradio from streak 7 added
• Removed live wallpapers that are not full screen
• FRING FRONT FACING CAMERA SUPPORT HAS BEEN REMOVED PERMANENTLY, START ARGUING WITH FRINGS DEV IF YOU HAVE A PROBLEM WITH THIS
• Rebuilt theme from scratch, works better now, removed borked batt percentage,
• Changed fonts to much nicer looking one
• Added microbes live wallpaper
• Added fards tweaked libskia libs to fix some websites dying
• Hopefully vplayer is now fixed
• Facebook sync confirmed working
• Tweaked the browser and phone icons to match gb theme .
• Finally managed to fix the phone app in lcd densitys other than 160 - thanks to the dell streak 7 dump for this
• Added an auto transfer feature to move from 1.6.1 with perfmod to stock 170 without
• Reverted Some 3D Tweaks made in 1.6.x causing Gameloft games to fail
UPDATE 22/1/2011
Version 1.6.1 AKA ITS OVER 3 THOUSAND
• Updated libs to fix oovoo
• Updated volboost kernel to new version
• Fixed some installer issues
• Added gopus battery icon, modified colors
• Made settings > about > System Update work for updating streakdroid roms (yes you can check for updates direct from your streak
• Added a Noswype installer option to remove the preinstalled swype
• Added zeam launcher
• Fixed fc's in settings
• Added HEAVILY Tweaked Performance Mod data2ext Tweak, using just the streaks internal sd card now no need for changing things on external sd
• Added an option to install gingerbread keyboard instead of stock keyboard - dictionary settings force closes with gingerbread keyboard installed
• Added Live Wallpaper From Nexus S
UPDATE 10/1/2011
Version 1.6.0 AKA Install-o-Rama
• Added heavily modified advanced installer thanks to kang-o-rama mod for nexus one.
• Changed theme to add black statusbar due to transparancy issues
• Fring support available through installer
• Transparancy available through installer
• Changing lcd density available via installer
• Baseband/nobaseband via installer
• Re-enable old louder volume kernel
• Teetermod via installer
• Enable galaxy tab email client via installer
• USA region settings in build prop via installer
• New kernel with some perf changes, cfq reenabled
• Bios animation bootscreen chooseable via installer
NOTE: for HDMI to work you must run gscript and load the 2 files from your memory card (the rom will of created a gscript folder containingthem) then run the hdmi output on script before trying video, once you are done either reboot or run the hdmi off script
this is due to one of the performance tweaks interfering with hdmi
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
[/quote]
Rom Download Links:
Primary Download Site: http://mirror2.streakdroid.com/update-1.8.1.zip
Mirror 1: http://downloads.streakdroid.com/djsteve/update-1.8.1.zip
IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+
Baseband File Download:
Primary Download Site: http://downloads.streakdroid.com/djsteve/amss.mbn
Mirror 1: http://mirror2.streakdroid.com/amss.mbn
VPN USERS: TUN.KO IS INCLUDED IN THE ROM ALREADY - LOOK IN /SYSTEM/LIB/MODULES.
if you have NOT already flashed the dell 2.2 pkg or my 720p fix you need this to fix 720p video - otherwise ignore
http://downloads.streakdroid.com/testing/dsp1.mbn
flash this using the fastboot command fastboot -i 0x413c flash dsp1 dsp1.mbn
Thanks to:
Everyone for suggesting things they want adding
Kang-O-Rama Rom Maker for nexus one for allowing me to use his advanced installer
omca & xplanet hosting for providing additional mirrors
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
android-roms for the mirror
Vinokirk for helping diagnose and sort out 2.1 baseband ril support and gps
Andycap & fards for providing modified Gps.conf
homeiss forthe excellent upgrade/downgrade guide
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
ALL THE TESTERS DESERVE HUGE THANKS FOR THEIR HELP EVERYONE !!
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
Currently on 1.7.1 Beta ver6. Downloading 1.8.0 FINAL right now.
DJ Steve you are a star. Downloading right now. When are we getting the honey comb that you have been teasing us about
wen i get sources, no point releasing a build that has nothing useful working
GiRARDsays said:
Currently on 1.7.1 Beta ver6. Downloading 1.8.0 FINAL right now.
Click to expand...
Click to collapse
Just flashed 1.8.0. Haven't noticed much difference between this final release and the beta I was on prior.
good job steve.i wont flash 1.8.0 yet because i just finished installing my apps on 1.7.0. but i'm sure is same as good as 1.7.0.cheers!
Thanks Steve.
What happened to 1.7Ghz performance?
Sent from my Dell Streak using XDA App
just so you know steve the build number says 1.7.0 when installing through streakmod
jvc.silence said:
good job steve.i wont flash 1.8.0 yet because i just finished installing my apps on 1.7.0. but i'm sure is same as good as 1.7.0.cheers!
Click to expand...
Click to collapse
You can flash it right over 1.7.0. No need to factory reset, therefore you won't lose apps or settings.
GiRARDsays said:
You can flash it right over 1.7.0. No need to factory reset, therefore you won't lose apps or settings.
Click to expand...
Click to collapse
How would i do this?
raymando said:
How would i do this?
Click to expand...
Click to collapse
I just flashed over 1.7. Just go into clockwork or streakmod and flash the zip. I wont erase your settings or apps.
raymando said:
How would i do this?
Click to expand...
Click to collapse
Download the new zip for 1.8.0 and save it to your SD card. Read the new install options and update your "install.txt" file if necessary. Then go into recovery, either StreakMod or Clockwork, then flash it just like how you did 1.7.0.
Dumb question but what do these exactly do? In english terms please. Will all of us need this? How will it help me?
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
borijess said:
Dumb question but what do these exactly do? In english terms please. Will all of us need this? How will it help me?
novolnoppt - flashes a kernel without the new kgsl(3d) per page table support and normal volume levels - fixes some gameloft games
volnoppt - flashes a kernel without the new kgsl(3d) per page table support AND VOLUME BOOST - fixes some gameloft games
Click to expand...
Click to collapse
It's really only relevant if you play Gameloft Games on your phone. If you do, choose the 1st one if you want volboost. If you don't play Gameloft games, don't worry about it.
i cant get this too load for the life of me. I wipe everything. had the install.txt file on the root of the sd. Im now trying with out the install.txt file. I get to the lock screen and it freezes.
Hellzya said:
i cant get this too load for the life of me. I wipe everything. had the install.txt file on the root of the sd. Im now trying with out the install.txt file. I get to the lock screen and it freezes.
Click to expand...
Click to collapse
Hmmm. Are you doing a fresh install or are you flashing over an older version? If you're flashing over an older version, which one is it?
Im doing a fresh install coming from 318 with perf mod. Ive tryed it without the install.txt and without.
My icons are really small, Why?
1.8.0 won't boot
1.7.0==>1.8.0 Stayed at stopped boot screen (Android Scribble Red) 30 minutes. Rebooted and now it wont get more than 1/3 through the boot screen before it locks. Cleared Cache and Dalvik. Still won't go.
Heading back to a very stable 1.7.0 till tonight. Hope it will go back!
I flashed 1.8 over 1.7 no problems.
Sent from the Almighty Streak 1.7.0

[ROM][RK3066][SD] Custom KitKat 4.4.2 by 4pad.ru (RK3066)

Below is a link to some custom firmware form 4pda.ru
https://yadi.sk/d/AzvtZZSkcn8RC
And a translation of the description of the changes :
Just want to warn that this is only a BETA VERSION, so to me very much not happy.
For those who are not satisfied with a set of programs or unhappy that you have something not working, You're not forced to use this firmware and you can install an alternative firmware. And whatever you do, you do so at your own risk.
The basis from firmware Android parts for KLD version of Android part 4.4.2
What added,changed remotely:
1. In the firmware embedded ROOT,is Manager for ROOTа SuperUser (SU) (excellent updated from Play Marketa), busybox.
2. After installing the firmware, the default is English,time zone GMT +4 (Moscow),you can put a third-party application.
3. Section for program installations with 1 GB increased to 2 GB
4. Removed icons when the reverse speed, because personally to me they only interfered with.
5. Added in the Settings Menu Startup folder.
6. Fixed the inaccessibility of some programs in Play Markete (Yandex Navigator,Radar Arrow and others)
7. Added Google services ,CHROME updated to the latest stable version
8. Added file Manager ES File Explorer
9. Added file Manager Root Explorer
10. Added Titanium Backup Pro full
11. Added ® Xposed. You will need to log in and activate Xposed framework (be sure to restart your device)
12. Added XposedMTC. You will need to first run the program Xposed Installer framework itself(see paragraph 11) and activate it XposedMTC the Modules section (be sure to restart your device)
13. Removed standard Musik.apk (system MTCMusic)
14. Removed Chinese and Japanese keyboard.
15.Added in Settings-Screen-traffic Management. Where you can enable,disable,change the display color of traffic in the door notifications.
16.Added in Settings-System-screen Density. Where you will be able to install the appropriate density of the screen. My advice, install 200-220 dpi
17.Added in Settings-Screen-enable the application bar in the dummy notifications.
18 Changed the style of the watch and blinds notifications.
19. Other fixes and additions.
On the photos there is a button to shut down and Restart, I did not add...it made.
And a link to the pre-rooted 1024x600 that Estimilo wanted, done on 4pda.ru (he went on there and got someone to do it !):
https://yadi.sk/d/cEUejmyfcnGdL
Do you still have it?
I have tried to download this file but it is no longer up, can you post it again please?
Regards
Anderson
I have tried to download this file but it is no longer up, can you post it again please?
Regards
Fabio Nicolas

MTCB/MTCC rk3188 (5.1.1) Firmware with an xposed set of MTC apps

Based on latest LOLLIPOP with MICRO GAPS and OPEN GAPS 1024 x 600 and 800 x 480 from @dsa8310.
Sharing with you my custom modified rom with LP image.
UPDATE 29.8.2017:
MicroG version: 1024 x 600 and 800 x 480
- added screen saver with speed, clock and apps shortcut ported from well known developer @Malaysk (null null still present)
(if someone need: screen saver in the attachement - replace with root explorer: system - app - mtcscreenclock
MTCScreenClock (round)
- 1024 x 600 resolutions has different radio and bluetooth apk
- included all xposed modules and fast google maps
- remember to enable all xposed modules and copy folder contents to external gps card!!!
Enjoy
UPDATE: 3.9.2017 LINKS UP 2019
microGaps version:
Lite 1024x600 microG version.
openGaps version:
Lite 1024 x 600 openG version.
Lite 800 x 480 openG version.
___________________________________________________________________________________
- LITE version of system
- added xposed status bar module for remove status bar items (copy mtc-status bar to external GPS Card)
- new screen saver without null null text (if doesn't show install it manually from: system/app/mtcscreensaver)
- removed all the bloatware callendar, calculator etc...
- added a lot of tweaks to speed the units with 1gb ram
- added new car launcher AG (trial) for me the best - full version 1€
- new xposed mtc manager 2.5 module
LITE VERSION OPTIMIZATIONS:
- kernel tweaks (changed parameters of dalvik vm etc,...)
- better ram management
- faster scrolling
- faster boot
- better responsiveness
- increased performance and app ram management
- better video acceleration
- disable sending android logging stuff
- force gpu&cpu rendering
System now uses less than 470 Mb of ram
BEFORE YOU START:
1. With disable service app find google play store and disable the first 5 services from top including DailyHygiene.
2. Login to MicroG
3. In microG settings enable google device registration
4. Clear data on Google playstore or clear from recents
5. Enjoy fast 5.1.11. playstore (if not showing paid apps just restart HU)
MTCB MCU USERS
- DSA's mtcxp xposed module has to be enabled before the status bar will show.
PREINSTALLED APPS and MODULES:
All these apps and xposed modules are preinstalled and you just have to activate xposed modules you need:
- disable_service
- google-maps-9.2 (you can update it just install as normal apk)
- mtcservice-2.60
- mtcsound-2.0.5 (remove from xposed if you don't have sound mod for better performance)
- mtcxp-1.0
- quickreboot
- RootExplorer
- Titanium_Backup
- xposed-disablefullscreenkeyboard
- xposed-mtc-bt-2.3
- xposed-mtc-keys-5.2 (custom keys for harware buttons)
- xposed-mtc-manager-2.5 (mode button mod and no closing apps when starting the car, etc.)
- xposed-mtc-music-2.8
- xposed-mtc-poweramp-1.4 (working media keys and stopping power amp when mtc app is started)
- xposed-mtc-radio-1.11
- xposed-VolumeBar (replaces original volume bar)
- 7th floor sound mod preinstalled and working
OTHER ADDITIONS: (included in download to copy on external SD (GPS card)
There is also file to copy on SD card (GPS card) that has features for MTCManager:
- hardware mode button can be configured (included in download) as well to switch between apps and auto play them (radio, poweramp, music, pcradio etc)
- mtc screen clock
- mtc status bar
DISABLING THE SCREEN SAVER OR CHANGING TIME:
Edit on external SD/ GPS-Card : Mtc.Manager/settings.ini
# the inclusion of an alternative screen saver, when you specify false will work full-time mechanism:
screenClock=false or true to activate
# Time off the screen if you do not set out full-time settings will be used in sec:
screenTimeout=300
# The name of the screensaver program package
screenPackage=com.microntek.screenclock
# Name Activiti screensaver
screenClass=MainActivity
# If the name of the package and Activiti is not specified, it will use a standard screensaver
MTC MANAGER CAPABILITIES:
capabilities
All configuration files must be on the external map in the mtc-manager directory.
1. The module carries the functionality of xposed-mcu , which does not allow the radio to go to sleep during the scrolling of the starter.
- when receiving a signal to turn off the module delays for 5 seconds, if at that moment the power reappears, nothing happens, in the absence of power, the radio recovers into sleep.
Due to the features of the implementation of the inclusion in our MCU, the screen goes out for the time of voltage failure.
This functionality can be disabled in settings.ini:
Settings.ini
Mcu_power = false
2. The module has a white list of applications that does not allow the system to close necessary services and applications when going to sleep and when pressing the "Acceleration" button in the blind. Thus, the module allows to refuse from using mtc-wakeup-service .
Filename with exceptions whitelist.ini
The file name of the white list application packages must be listed.
#
example
3. Accelerated start of user services. The services are started when the system kernel is loaded.
The list of services should be on the external map in the mtc-manager directory, the file name start_services.ini
each line should contain the service name in the format package name / full service name,
#
example
4. An alternative screensaver with a list of exceptions, running in any (even a non-standard application). The standard screen saver mechanism is activated.
It may not work on all firmware.
Settings in the settings.ini file.
Settings.ini
# Inclusion of an alternative screensaver, if false, the standard mechanism will work:
screenClock = true
# screen off time, if not specified, the value from the
default settings will be used: screenTimeout = 60
# screen saver program name
screenPackage = com.microntek.screenclock
# screen saver activation name
ScreenClass = MainActivity
# if the package name and activations are not specified, then the standard screensaver will be used
The exception list is located in the ss_exceptions.ini file - the package names must be listed, for example:
Ss_exceptions.ini
com.microntek.music
ru.yandex.yandexmaps
Also the screensaver will not start when talking on the phone, the rear view camera, navigation and turning off the radio.
If instead of a beautiful clock MTCSreenClock.apk a screensaver with a standard digital clock on a black background is called, you need to make sure that the MTCScreenClock application is installed.
If the application is installed, you can try setting screenPackage and screenClass parameters in settings.ini
5. Also in the module there is a "backup" for correct sound adjustment in MTC-Volume and MTC-Service .
#
The adjustment of sound in firmware on Android 4.4.4
6. Re-designation of OBD-device bluetooth.
Device names must be listed in the settings.ini file in obd_device parameter, separated by commas, in the form in which they are visible in the standard hands-free application. You can specify not names, but parts of names, for example:
Settings.ini
Obd_device = OBD, DUAL-SPP
7. Set the list of programs that are switched by the MODE button,
In settings.ini, set
Settings.ini
ModeSwitch = true
Programs are switched sequentially one after the other.
For correct sound switching, the applications used must be managed (play / pause) programmatically via intents. If the player does not support the start and stop playback of external intents, then you have to manually switch the sound.
When you click on the MODE button, the active application is searched for in the running list. Next, the application is sent a command (configurable in mode.ini) to close or pause the audio stream. After that, the default activation for the next application is launched and the application is sent a command to start playback (also configured in mode.ini)
#
Mode.ini
8. Disable the launch of the last running program.
Settings.ini
Clear_last_app = true
9. GPS time synchronization.
Settings.ini
Sync_gps_time = true
10. Turn on w-fi at startup.
Settings.ini
Wifi.on = true
Paypal:
https://paypal.me/johnydj?locale.x=en_US
Hello,
Please help me a little, it was a more than one year since I updated my fw.
How do I update to this firmware, I forgot the procedure?
Is it clean install, all apps/data are going to be wiped and must be installed again?
Is there a way to backup current firmware/apps, like twrp image or something (in case something goes wrong)?
Thank you
grgart said:
Hello,
Please help me a little, it was a more than one year since I updated my fw.
How do I update to this firmware, I forgot the procedure?
Is it clean install, all apps/data are going to be wiped and must be installed again?
Is there a way to backup current firmware/apps, like twrp image or something (in case something goes wrong)?
Thank you
Click to expand...
Click to collapse
Backup with titanium backup all your apps you want.
wipe data/factory reset from recovery, then flash the image with clear all
With titanium backup restore your apps back, thats it.
hi johnny,
would like to check if u manage to solve these issues of
1. xposed volume bar in the center of screen instead of bottom
2. misaligned apps buttons in mtcbluetooth mtcwheelstudy etc.
thank you in advance
jun81 said:
hi johnny,
would like to check if u manage to solve these issues of
1. xposed volume bar in the center of screen instead of bottom
2. misaligned apps buttons in mtcbluetooth mtcwheelstudy etc.
thank you in advance
Click to expand...
Click to collapse
1. Did you activate xposed mtc manager module in xposed app ?
2. Can you post picture, I didn't experienced this issue on my unit using the same image...
3. Please note this is 1024 x 600 resolution image...flashing on 800 x 480 can couse this issues you have...
Will post pic once I get a chance. Had no problem with gui using the dsa's last dec 5.1.1 rom.
jun81 said:
Will post pic once I get a chance. Had no problem with gui using the dsa's last dec 5.1.1 rom.
Click to expand...
Click to collapse
I added screen saver in latest version. But still don't know why you have problems with resolution. I can upload stock apps and you can try if there is also problem or not...
What are the performance benefits from the dsa8310 rom on a 1gb ram headunit?
I'm currently running dsa8310 latest 5.1.1. on my 1gb headunit. What sort of advantages will I see if I flash to your rom?
iselfdevi said:
What are the performance benefits from the dsa8310 rom on a 1gb ram headunit?
I'm currently running dsa8310 latest 5.1.1. on my 1gb headunit. What sort of advantages will I see if I flash to your rom?
Click to expand...
Click to collapse
Hard to say without knowing the exact version of his ROM youre running currently, but generally its a good idea to update the software as it is on any computer/smartphone/tablet. You shouldnt have to wipe data if youre already using it.
Read the thread to see the improvements that have been made recently - he lists them all.
Waiting for the 800 x 480 version !
champikasam said:
Waiting for the 800 x 480 version !
Click to expand...
Click to collapse
Done, check it out
Johny DJ said:
Done, check it out
Click to expand...
Click to collapse
Awesome ! Will check and let you know
---------- Post added at 04:39 PM ---------- Previous post was at 04:06 PM ----------
Johny DJ said:
Done, check it out
Click to expand...
Click to collapse
Could you check whether 800 x 480 img file is properly formatted ? I'm unable to mount or extract it. Getting an error saying the img file is corrupted. Will try to download again and try.
champikasam said:
Awesome ! Will check and let you know
---------- Post added at 04:39 PM ---------- Previous post was at 04:06 PM ----------
Could you check whether 800 x 480 img file is properly formatted ? I'm unable to mount or extract it. Getting an error saying the img file is corrupted. Will try to download again and try.
Click to expand...
Click to collapse
Full dropbox, check again...
Johny DJ said:
Full dropbox, check again...
Click to expand...
Click to collapse
Downloaded again. Same error
champikasam said:
Downloaded again. Same error
Click to expand...
Click to collapse
I extracted microg_preinstalled_800x480LP5.1.1rk3188.MTCB-C(20.8.2017) without problems ??
Try to rename it to some short name: update or something...
New link .rar
https://www.dropbox.com/s/95j1iqvqv...0x480LP5.1.1rk3188.MTCB-C(20.8.2017).rar?dl=0
Johny DJ said:
I extracted microg_preinstalled_800x480LP5.1.1rk3188.MTCB-C(20.8.2017) without problems ??
Try to rename it to some short name: update or something...
New link .rar
https://www.dropbox.com/s/95j1iqvqv...0x480LP5.1.1rk3188.MTCB-C(20.8.2017).rar?dl=0
Click to expand...
Click to collapse
Thanks ! i was able to download using the rar file. Most of the functions are working great ! It's fast and responsive. Please check on the following:
1) I'm unable to see the task bar/notification drawer at the top. I'm on the default launcher. Do i need to enable it anywhere ? Check the photos below:
https://ibb.co/hiJM1k
https://ibb.co/f24GZ5
2) I couldn't find google maps installed by default. So i installed the latest version from the play store. Its working fine (fast and responsive), but it doesn't show up in the selection list when i press the navi button on the player (to set it as the default navigation app). I only see the following nav apps in the list:
https://ibb.co/gG4YE5
Thanks !
champikasam said:
Thanks ! i was able to download using the rar file. Most of the functions are working great ! It's fast and responsive. Please check on the following:
1) I'm unable to see the task bar/notification drawer at the top. I'm on the default launcher. Do i need to enable it anywhere ? Check the photos below:
https://ibb.co/hiJM1k
https://ibb.co/f24GZ5
2) I couldn't find google maps installed by default. So i installed the latest version from the play store. Its working fine (fast and responsive), but it doesn't show up in the selection list when i press the navi button on the player (to set it as the default navigation app). I only see the following nav apps in the list:
https://ibb.co/gG4YE5
Thanks !
Click to expand...
Click to collapse
1. Hm...really don't know what happend to statusbar... try to disable / untick all xposed modules and reboot to see if some of xposed modules is cousing problems... I hope you did wipe all data / factory reset and then clear all and install from usb/sd and after that you can try wipe all data again and reboot, but everything should work because it's the same image from dsa's just added all the xposed modules...,
2. Yes, I forgot it, I updated image again and here: just copy folder in the rar with root explorer to system/app and change permisions just Maps.apk to r-r-w (664) reboot.
Try just to find your launcher in the android settings - apps and clear data.
Maps: https://www.dropbox.com/s/m44hv1189is36fr/Maps.rar?dl=0
Hello !
First I have to thank you @Johny DJ for this beautiful firmware. It's faster than i ever had on my MTCC-KLD6-V2.97 1024*600.
Also I take this opportunity to thank @dsa8310 and @Malaysk for their brilliant work in this adventure.
I love you guys, all as you are.
This said, i have a question : What's the difference between the first firmware (released 14/08 i think) that works really good on my unit RK 3188 (1024*600) and the release of today ?
Also my only "problem" is the text "null null" (like here : https://ibb.co/dL3dU5) on the screensaver which i think it correspond normally to the weather in Malaysk's rom. So i tried to install the weather app provided by Malaysk called "MTCWeather.apk" but it does not work. I have to precise that the display of the speed works OK.
Does this new release correct this little issue ?
Again thanks for all and have a nice day.
Cheers !
airlink75 said:
Hello !
First I have to thank you @Johny DJ for this beautiful firmware. It's faster than i ever had on my MTCC-KLD6-V2.97 1024*600.
Also I take this opportunity to thank @dsa8310 and @Malaysk for their brilliant work in this adventure.
I love you guys, all as you are.
This said, i have a question : What's the difference between the first firmware (released 14/08 i think) that works really good on my unit RK 3188 (1024*600) and the release of today ?
Also my only "problem" is the text "null null" (like here : https://ibb.co/dL3dU5) on the screensaver which i think it correspond normally to the weather in Malaysk's rom. So i tried to install the weather app provided by Malaysk called "MTCWeather.apk" but it does not work. I have to precise that the display of the speed works OK.
Does this new release correct this little issue ?
Again thanks for all and have a nice day.
Cheers !
Click to expand...
Click to collapse
Thank you!
There is no so much difference, just added new screen clock, but there will be still null null. It won't work because it's settings are part of android settings from Malaysk.
You should try lockclock apk (its related to weather app)
If you find a solution I can update system image to get weather fully working, but I was not bothering with that, because then system will also use more ram etc...I will try to remove the null null item...
here are the apps you can try:
https://www.dropbox.com/s/sukxg16l2z4ygbr/apps.rar?dl=0
Johny DJ said:
Thank you!
There is no so much difference, just added new screen clock, but there will be still null null. It won't work because it's settings are part of android settings from Malaysk.
You should try lockclock apk (its related to weather app)
If you find a solution I can update system image to get weather fully working, but I was not bothering with that, because then system will also use more ram etc...I will try to remove the null null item...
here are the apps you can try:
https://www.dropbox.com/s/sukxg16l2z4ygbr/apps.rar?dl=0
Click to expand...
Click to collapse
@Hal9k_'s MTCD ROM has a screen lock, I asked him how he did it and he said he just added back the original Android code.
EDIT : Lol, stupid me you said "lockclock" not screen lock ! Doh !

Categories

Resources