Won't connect to network - Optimus One, P500, V General

I got an Optimus One from a friend. I flashed CyanogenMod on it and Im not sure if I did it correctly. I dont know much about it. This is the file I used:
update-cm-7.2.0-RC1-p500-signed.zip
Everything seems to be working fine except I cant connect to any network. I am trying to unlock my phone (its locked to KOODO right now) and I enter the "2945#*500#" code in it says "Mobile Network Not Available"
If I manually try to choose any network in the settings it just says unable to connect to network, please try again later.
Are my settings just wrong, or maybe I forgot to install something when I flashed it?

Are you on the wrong baseband?
Sent from my LG-P500 using xda premium

ThaDraGun said:
I got an Optimus One from a friend. I flashed CyanogenMod on it and Im not sure if I did it correctly. I dont know much about it. This is the file I used:
update-cm-7.2.0-RC1-p500-signed.zip
Everything seems to be working fine except I cant connect to any network. I am trying to unlock my phone (its locked to KOODO right now) and I enter the "2945#*500#" code in it says "Mobile Network Not Available"
If I manually try to choose any network in the settings it just says unable to connect to network, please try again later.
Are my settings just wrong, or maybe I forgot to install something when I flashed it?
Click to expand...
Click to collapse
U got new baseband?
Sent from my LG-P500 using xda premium

I have no idea if Im on the right baseband. I really dont know what it means other then it has something to do with the networks.
When I go to about Phone and Baseband version it doesnt really say anything. Im sure it said something different before when I looked at it the other day. Right now it says:
Baseband version
$n(Backwards R)(box)(box)(box)(chinese symbol?)(box)
So that has got to be the issue. How do I fix it tho? flash a different rom? I do want to try something different. I find the phone is usually really slow after I wake it up and unlock it.

Basebands!
http://forum.xda-developers.com/showthread.php?t=1149530

download basebandfix.zip(by Adfad666) and install it from recovery as you flashed your rom, this will fix your network problem
download it from attachment

Sohaard said:
download basebandfix.zip(by Adfad666) and install it from recovery as you flashed your rom, this will fix your network problem
download it from attachment
Click to expand...
Click to collapse
So I did this and it installed the zip just fine. A few differences now:
In lock screen it now says "NO SERVICE"
About Phone > Baseband Version > "UNKNOWN"
Mobile Network Settings > Network Operators >
"ERROR WHILE SEARCHING FOR NETWORKS"
Before it found the networks, just couldnt connect to them.

After fooling around with it more I got a baseband version in there. Here is my info:
BASEBAND: LGP500AT-00-V20g-OPEN-COM-JUN-14-2011+0
Android Version: 2.3.7
Kernel Version: 2.6.35.10-cyanogenmod [email protected]))
Mod Version: CyanogenMod-7-20120527-NIGHTLY-p500
Is this the right Baseband? SHould I just try a differnet mod?
It now sees the networks again, but has the connection error like before.
BTW The icon at the top that is a sim card with an exclamation mark on it. What does that mean? Its always been there but I didnt know what it meant. Does it mean that the phone is locked and the sim is incompatable, or does it mean that there is no sim in the phone?

Try to reinsert your sim card if problem not solved then proceed to next
First you need to unlock your sim. To unlock sim first flash stock firmware using kdz updater, follow this guide http://forum.xda-developers.com/showthread.php?t=1060121
Download stock firmware from here(select any v20 version) http://lg-phone-firmware.com/firmware-Lg+Optimus+One-Tutti-4.html
After flashing firmware do a factory reset(settings -->privacy settings -->factory data reset)
After factory reset type 2945#*500# then type unlock code
After unlocking flash any rom of your choice

Sohaard said:
Try to reinsert your sim card if problem not solved then proceed to next
First you need to unlock your sim. To unlock sim first flash stock firmware using kdz updater, follow this guide http://forum.xda-developers.com/showthread.php?t=1060121
Download stock firmware from here(select any v20 version) http://lg-phone-firmware.com/firmware-Lg+Optimus+One-Tutti-4.html
After flashing firmware do a factory reset(settings -->privacy settings -->factory data reset)
After factory reset type 2945#*500# then type unlock code
After unlocking flash any rom of your choice
Click to expand...
Click to collapse
Yes it is locked. Thats how I figured out somthing was wrong in the first place. I was trying to unlock it (entered 2945#*500#) and it said "Mobile Network Not Available"
I didnt realize that it had to be unlocked in stock firmware to work. That might have been the problem all along then.
I dont see any v20 version. On the page there is
LG official firmware android version v2.2.2 build v10E created by VIjayKumar
Click to expand...
Click to collapse

I dont see any v20 version. On the page there is[/QUOTE said:
i already given link in my last post(second link)
here it is again http://lg-phone-firmware.com/firmware-Lg+Optimus+One-Tutti-4.html
Click to expand...
Click to collapse

Before following tutorial install "LGUnitedMobileDriver" from attachment, now you don't need to install "LG PC Suite" and Disable 'LGE Virtual Modem'

Sohaard said:
i already given link in my last post(second link)
here it is again http://lg-phone-firmware.com/firmware-Lg+Optimus+One-Tutti-4.html
Click to expand...
Click to collapse
Sorry totally missed that.
So I tried the tutorial. I downloaded this one:
18 KDO/KOODO_MADISON(CANADA) V20A LGP500H 32
Click to expand...
Click to collapse
I used KDZ_FW_UPD.exe to flash it, Waited until it said finished and now I'm semibricked. Stuck at the android boot screen. Ive tried it 3 times and I can never get past that screen.
I attached the log
EDIT
After rebooting numerous times, and waiting and waiting.. I figured out none of that will do anything. Gotta press three button combo for HW reset of device (volume up + home + power button)
Its all fixed now.

Thanks guys everything works now. My phone is now unlocked.
Any suggestions what custom rom I should flash?
Should I Stick with CM7?

Deleted

Congatulations!
Why u don't try neko's Rom .Its great

Related

[q] nv_fail_s on lgmdp

Well i have no mobile data....i ran lgmdp, followed the tutorial to the t, waited for the emergency reboot-recovery-etc....and now on lg tool im getting a nv_fail_s and have no working mobile data ? It's obviously not bricked but under about phone it still shows v07u, i tried using v10e (for all other roms) there's an option for ok and cancel, what should i click ? Because i saw or read nothing on the tutorial about this situation ?
jrhodes85 said:
well i have no mobile data....i ran lgmdp, followed the tutorial to the t, waited for the emergency reboot-recovery-etc....and now on lg tool im getting a nv_fail_s and have no working mobile data ? It's obviously not bricked but under about phone it still shows v07u, i tried using v10e (for all other roms) there's an option for ok and cancel, what should i click ? Because i saw or read nothing on the tutorial about this situation ?
Click to expand...
Click to collapse
after reboot, phone now has working mobile data, but im pretty sure the whole process did not work
I was helping someone flash the new baseband (through remote control) and I ran into the same error. I hit ok and all went well
Sent from my LG-P509 using xda premium
sweetnsour said:
i was helping someone flash the new baseband (through remote control) and i ran into the same error. I hit ok and all went well
sent from my lg-p509 using xda premium
Click to expand...
Click to collapse
ohh really ? I guess i should of done that right away, b/c for a few moments i sat around thinking god i just messed up somewhere.....so do you believe i should go thru the whole process again ? It did create a nv file in the directory of the unpacked files....what i did once i saw that fail status, i ended up rebooting my phone, than working mobile data i than hit ok, only after reboot...so my question ? Do you think it's safe to restart the process ?
When you were flashing the baseband, did it say "download complete" at the end of the process? If it did, and you have working gsm/data, I'd say you are pretty set for now.
If you do find that later on, you have gsm/data problems (that are not rom-related), I would redo the process. If you want to be on the safe side, you can always reflash the baseband of course, but again, if everything seems to be working, I would just leave everything as it is.
By the way, I was just rereading all of the posts, and I just want to point out that unless you are on CM7 nightlies, your baseband will always read as V07u-000-000-MAR-23-2009 under settings>about phone
I actually think i might have new baseband check out the pic
I think you have the old baseband, since v10(insert letter here) is the old baseband, and v20(insert letter here) is the new baseband.
Oh no buddy it worked i was on v10e, i just flashed v20g to try and use with blackbird, but after seeing all the bugs in the rom i decided to switch back to V10E, i have to say im impressed...i do see a difference...i didnt think there would be a difference but there is

[Q]So is there a Legit answer to the crashing problem??

I've searched this thread, and google with no clear answer as to what to do to solve this problem, a similar thread exists but it looks just like troll answers so here is my issue! I've rooted and installed the CWM but now my Jetstream seems to crash everytime I press the power button to lock the screen, also when the screen locks itself. I've tried resetting to factory settings, nothing works. Any help would be greatly appreciated
Mitchface said:
I've searched this thread, and google with no clear answer as to what to do to solve this problem, a similar thread exists but it looks just like troll answers so here is my issue! I've rooted and installed the CWM but now my Jetstream seems to crash everytime I press the power button to lock the screen, also when the screen locks itself. I've tried resetting to factory settings, nothing works. Any help would be greatly appreciated
Click to expand...
Click to collapse
Are you still on the factory kernel or did you upgrade to the DoomKernel? I found the reboots happened with the DoomKernel but have not had a single reboot since I went back to the factory kernel.
ATT Intruder said:
Are you still on the factory kernel or did you upgrade to the DoomKernel? I found the reboots happened with the DoomKernel but have not had a single reboot since I went back to the factory kernel.
Click to expand...
Click to collapse
Im still on doomkernel, I don't know how to go back to normal, this is my first Android device haha I only got it because it was 169.99 on a one year term since I work for Rogers in Canada. I could fix my iPhone easily but this is proving to be a little more challenging
here's what you need to do:
backup whatever you can
Re-lock the bootloader. (using the instructiones at htcdev.com/bootloader)
download and run the RUU file from htc.com/us
it will update the version of the device and will clear all the data from it, including root access and kernels
now that the device is like new again - root it if you wish to, but do not flash the kernel by doomlord. its not stable.
Okay so to relock bootloader do I just plug it in and go to fastboot and use the command fastboot oem lock? I will try when I get home from work, I tried this before but got an error when I tried to use the RUU installer I cant remember what it was exactly, but ill post results when I have them
Mitchface said:
Okay so to relock bootloader do I just plug it in and go to fastboot and use the command fastboot oem lock? I will try when I get home from work, I tried this before but got an error when I tried to use the RUU installer I cant remember what it was exactly, but ill post results when I have them
Click to expand...
Click to collapse
Correct. Relock, run the Ruu and then root and install the doom recovery. I've done everything but put his kernel back on (not the insecure kernel, that gives you root) and am very pleased with how my Jetstream functions. Still needs a good custom ROM though.
Sent from my SAMSUNG-SGH-I777 using XDA App
Alrighty thanks! Will try it as soon as filefactory lets me download my ROM -.- are there any other download links available because the trouble I have trying to download this is ridiculous I've been trying for 2 hours and I keep getting All free download slots on this server are currently in use.
For immediate access, upgrade to FileFactory Premium. Alternatively, you can try again shortly.
Retry download
it says the rom update utility cannot update your phone please get the correct rom update utility and try again
there is a chance that there are two different RUUs. one for Rogers and one for at&t.
try searching rogers for an RUU..
Mitchface said:
it says the rom update utility cannot update your phone please get the correct rom update utility and try again
Click to expand...
Click to collapse
If you look through the forum you will find a link for the Rogers ROM.
Sent from my SAMSUNG-SGH-I777 using XDA
Ive tried all three roms found in the dev section! The first two were exes and didnt work and when i tried to flash the zip i get an error that says FAILED Remote: 12 signature verify fail -sigh
if u'r having crashes you need to flash the RUU from Rogers. RUU means Rom Upgrade Utility. it's an exe file published by htc/rogers.
you need to d/l the file, connect the device to the computer and run it, after relocking the bootloader.
the ROMs that are in the development section are very raw and pretty much neglacted by now. do not try to flash them, it will probably only make things worse.
Okay, so where would I find the Rom from HTC. I work for Rogers and we do not provide them.
try searching the forum for a rogers version.
if you can't find one - i'd try resetting the device first.
long press the power button.(20 sec).
than turning it on while holding Vol. down. there you can find the factory reset.
if that takes you to the recovery try wiping all the data (cach,data,delvik whatever)
if nothing works, try the link below. maybe it'll work on your version.
http://www.htc.com/us/support/jetstream-att/downloads/
Booo nothing works I give up my jetstream is a brick (((

Unlocked MetroPCS LG L9 won't recognise any SIM

Hi! Well, I'm trying to "revive" this L9-P769, it wont recognise any SIM, its unlocked, I went into the menu to put the unlock code and everything says "Phone not personalized", I've even installed a T-Mobile kdz, nothing, just won't recognise any SIM, I did a hard reset too. Any help is appreciated.
More info:
1.-The phone just says "No SIM card".
2.-In the " Network" section of "About phone" says "Searching for service", signal strength "0 dBm 0 asu" and mobile network type "Unknown".
3.-The phone "has" signal bars.
3.-Baseband is: "L6260_MODEM_SIC_01.1305.00".
EDIT: I've just noticed the phone has 4 pins for the SIM, instead of the 3 the other ones here have, that's kinda weird (I would post a Photo with a comparison but I can't post images yet, but I hope you guys understand that)
See my post in UltraROM thread. As a last resort, try the emergency recovery option in the LG Tool, which will install the latest stock ROM.
When you say unlocked, do you mean BL, or NAM?
Sent from my SM-G920W8 using Tapatalk
Let's keep posts over here, instead of cluttering up the other thread.
ajbiz11 said:
Radio/SIM works fine on p769 ROMs. I need proper radio firmware blobs for a p760 ROM, though. Also, I don't know if V20C can be unlocked.
Click to expand...
Click to collapse
I'm confused. Your OP says SIM not recognized, and now you say it works fine on p769 ROMs. Details...
There's a KDZ extract tool floating around, extract any needed BINs directly.
I'm unsure if V20C can be unlocked, never tried. I'll see what I can do about finding a download link for V20B.
Sent from my SM-G920W8 using Tapatalk
DarryDoo said:
Let's keep posts over here, instead of cluttering up the other thread.
I'm confused. Your OP says SIM not recognized, and now you say it works fine on p769 ROMs. Details...
There's a KDZ extract tool floating around, extract any needed BINs directly.
I'm unsure if V20C can be unlocked, never tried. I'll see what I can do about finding a download link for V20B.
Sent from my SM-G920W8 using Tapatalk
Click to expand...
Click to collapse
Under a p769 ROM, everything works
Under a p760 ROM, I have no SIM.
I flashed the Radio.zip provided in the unlock thread, and it did nothing.
So if you now put a 769 ROM on it, the SIM card is once again recognized?
Sent from my SM-G920W8 using Tapatalk
DarryDoo said:
See my post in UltraROM thread. As a last resort, try the emergency recovery option in the LG Tool, which will install the latest stock ROM.
When you say unlocked, do you mean BL, or NAM?
Sent from my SM-G920W8 using Tapatalk
Click to expand...
Click to collapse
NAM, already tried flashing with LG Tool, I'll just give up, I can't find anything and that means its possibly a hardware problem.

Z9 Max NX510J - No SIM Card/ SIM Card deactivated after upgrading

Hi All,
Hoping for some support.. I have tried upgrading my phones ROM recently and I have issues. My phone now will not see any sim card or if I take the card out and put it back in the sim card says deactivated.
I have tried flashing with with multiple roms and it is not bringing my phone back to life any ideas how I can get it working again?
Which Rom have you used for the upgrade? The latest official one, 3.78? And how did you perform the upgrade? I did it with TWRP and placed the rom on the micro SD, once finished, reset factory values.
Try to do the upgrade without the nano sim inside, not sure though if this does the trick. Once you've reset to factory values do not reboot, first shut down the device, place the sim inside and start the phone.
Sent from my NX510J using Tapatalk
K3nshiro said:
Which Rom have you used for the upgrade? The latest official one, 3.78? And how did you perform the upgrade? I did it with TWRP and placed the rom on the micro SD, once finished, reset factory values.
Try to do the upgrade without the nano sim inside, not sure though if this does the trick. Once you've reset to factory values do not reboot, first shut down the device, place the sim inside and start the phone.
Sent from my NX510J using Tapatalk
Click to expand...
Click to collapse
I will give it a go.
I tried using emergency recovery and 3.78 stock rom..
Lets see what happens if I use TWRP with 3.78 without the sim
TWRP
http://forum.xda-developers.com/showthread.php?t=3154895
You will need to install Android SDK and push recovery through adb.
Sent from my NX510J using Tapatalk
sainsbup said:
I will give it a go.
I tried using emergency recovery and 3.78 stock rom..
Lets see what happens if I use TWRP with 3.78 without the sim
Click to expand...
Click to collapse
So what's the outcome ? Any luck ?
Please have a look at some solutions here...from the Nexus Forum, but it should be doable as well on our device...
http://forum.xda-developers.com/google-nexus-5/help/sim-card-recognized-upgrade-to-nexus-5-t3054267
Cheers
sainsbup said:
Hi All,
Hoping for some support.. I have tried upgrading my phones ROM recently and I have issues. My phone now will not see any sim card or if I take the card out and put it back in the sim card says deactivated.
I have tried flashing with with multiple roms and it is not bringing my phone back to life any ideas how I can get it working again?
Click to expand...
Click to collapse
try to type *#06# if imei's are null there is your problem.. got the same with Z7 (
@sainsbup
Mate, how did it work out ? Have you been able to get things straight again ? Did you lose EMEI or is everything still in place?
Cheers
No luck
K3nshiro said:
@sainsbup
Mate, how did it work out ? Have you been able to get things straight again ? Did you lose EMEI or is everything still in place?
Cheers
Click to expand...
Click to collapse
tried all kinds still no joy - IMEI is null! is it possible to recover this at all?
Nubia updater should save your IMEI in C:\nubia backup\ or simmilar. You can recover IMEI by the same nubia updater clicking on left upper corner on application and clicking position under Close. You'll open Nubia Restorer and you can restore your both IMEIs and MEID
If you update by ther way you have a big problem (then you have to edit nv file - try youtube)
best regards
@sainsbup
If DarkseederZ7´s method does not work, try everything manually...this implies (back up your apps first):
1. Getting unrooted, just go to SuperSU/Settings and check "Full unroot"
2. Reboot
3. Extract stock recovery from official 3.78 stock rom (recovery.img) in your pc
4. Place the recovery.img in the platform-tools folder of your Android SDK
5. Enter ADB (developper mode and USD Debugging must be enabled)
6. Type : adb devices -> you should see then a line saying "NX510J device"...
7. Type then : adb reboot bootloader -> your sending your device to fastboot through ADB
8. Type now exactly this : fastboot -i 0x19d2 flash recovery recovery.img -> you now have stock recovery
9. Reboot
10. Go to system update, on top right corner click on the dots "System Upgrade by Disk", find your stock rom, click Ok.
11. Let it install, once done check if everything is in place. A factory reset is recommended after a rom installation.
12. Let us know your progress
Cheers

ANE-AL00 no 3G/4G in US

Hi,
I'm using GSI-treble CAOS 11. I recently moved to the US and I don't seem to get 3G/4G in the US. 3G/4G worked when tried on another phone with the same sim.
I'm using a ANE-AL00. Is it a baseband issue? Any thoughts?
And I'm getting connected to 2.4Ghz wifi only, not sure if it's a bug.
Thanks
balamu96m said:
Is it a baseband issue?
Click to expand...
Click to collapse
Hello, it's very likely...
Look here
-Alf- said:
Hello, it's very likely...
Look here
Click to expand...
Click to collapse
I checked for the phone for which data is working and it also has similar support levels for the bands.
I'm trying flash stock ROM to see if it helps.
Thanks
balamu96m said:
I'm trying flash stock ROM to see if
Click to expand...
Click to collapse
Try eRecovery, using option "Download latest version and recovery".
https://forum.xda-developers.com/t/...ndroid-11-stable-so-far.4222155/post-84460297
The second method is flashing Service ROM aka fullStock ROM via dload method, but this process will erase all your data and lock bootloader again.
-Alf- said:
Try eRecovery, using option "Download latest version and recovery".
https://forum.xda-developers.com/t/...ndroid-11-stable-so-far.4222155/post-84460297
The second method is flashing Service ROM aka fullStock ROM via dload method, but this process will erase all your data and lock bootloader again.
Click to expand...
Click to collapse
I tried the eRecovery auto update but it always fails to get update details for me after connecting to WiFi.
With the load method, although the bootloader gets locked, I can unlock using the same unlock code right?
balamu96m said:
the same unlock code right?
Click to expand...
Click to collapse
Right, each bootloader code is permanent, it wont expire.
What is your model and build number? (for example, 9.1.0.257(C432E6R1P7) )
-Alf- said:
Right, each bootloader code is permanent, it wont expire.
What is your model and build number? (for example, 9.1.0.257(C432E6R1P7) )
Click to expand...
Click to collapse
Mine is 9.1.0.314(C675E9R1P3)
Will flashing a different modem.img work?
balamu96m said:
Will flashing a different modem.img work?
Click to expand...
Click to collapse
I don't know, I've never tried it .
Maybe this will help you:
https://forum.xda-developers.com/t/full-network-mode-preferences-on-gsi.4342225/
Or try this solution:
In SetEdit app:
1. + 'Add new setting' at the top.
2. Key in:
hw_add_4g_only
3.Tap Save.
4. In 'Edit setting', enter your mobile country code , can be found in your current APN Accses Point -> MCC . (or look for your mobile country code here )
5. Tap Save changes, close app and restart your phone.
-Alf- said:
I don't know, I've never tried it .
Maybe this will help you:
https://forum.xda-developers.com/t/full-network-mode-preferences-on-gsi.4342225/
Or try this solution:
In SetEdit app:
1. + 'Add new setting' at the top.
2. Key in:
hw_add_4g_only
3.Tap Save.
4. In 'Edit setting', enter your mobile country code , can be found in your current APN Accses Point -> MCC . (or look for your mobile country code here )
5. Tap Save changes, close app and restart your phone.
Click to expand...
Click to collapse
Thanks! I'll look into it. But I flashed stock EMUI9.1 and still, the network works only on EDGE. So, I guess it has something with hardware/firmware. I don't know the difference between LX1 and ANE-AL00 in terms of hw...wondering if I should try LX1/LX2 stock rom..
balamu96m said:
wondering if I should try LX1/LX2 stock rom..
Click to expand...
Click to collapse
I would not recommend ...
You can install only firmware for your regional variant - Al00 (C675), for example this one .
(Cxxx) is very important in determining the correct firmware to download.
-Alf- said:
I would not recommend ...
You can install only firmware for your regional variant - Al00 (C675), for example this one .
(Cxxx) is very important in determining the correct firmware to download.
Click to expand...
Click to collapse
JFYI - https://forum.xda-developers.com/t/changing-lte-bands.3769176/
-Alf- said:
JFYI - https://forum.xda-developers.com/t/changing-lte-bands.3769176/
Click to expand...
Click to collapse
Thanks again!
So, based on that, I flashed LX3 oeminfo and LX3 stock from. My phone is now rebranded to LX3 but still, I'm getting only EDGE! Probably that's all I can do I guess. I'll check with the operator once but then I don't have much hope too!
Anyway it was an interesting exercise (also consumed a lot of time)
Cheers!

Categories

Resources