[Edited][Tweak][11-06-12] Supercharger V6 For Stock ICS 4.0.4, 431/587 - Sony Ericsson Xperia Neo, Pro

* Read this to supercharge 587 *
Download of the V6_SuperCharger_for_Android-Update9_RC11_Test_6.sh
in attechment and save as
1st of all, I did this to get 100% Supercharged on 587 !!
I installed scriptmanager from the playstore
Open the file and give it root acces so run as root
Then i download the starterskit RC12 from Wraithdu!
Also here: http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Alright here we GO !!
* Extract the zip and put the folder SuperCharger_Starter_Kit
on your sd card called ROOT
* With Script Manager, just run StartMeUp.sh to install everything at once.
* So now you have installed the new Busybox 1.19.4 by Wraithdu.
* Then run the V6_SuperCharger_for_Android-Update9_RC11_Test_6.sh again
With scriptmanager
*It will ask for your service.jar: Download (A) Automatic or (M) Manuel?
Choose A(Automatic)
* After that your device will reboot and install the apps again
* No worries you will get nothing to lose !! ^^
* Put the V6_SuperCharger_for_Android-Update9_RC11_Test_6.sh in a folder called ROOT on your sdcard
* Then run the V6_SuperCharger_for_Android-Update9_RC11_Test_6.sh again
* Now it will ask set you speed (1, 2, or 3)
* Choose 1 fast
* Then is ask questions with Yes or No
* Choose all Y (Yes)
* Almost Done
* Then you get choises from 1 t/m 33
* Choose 6 (Ledded)
* when that is done
* Exit (33)
* Then go the scriptmanager again and go then to
* data
* scroll down under till you see:
99supercharge.sh
* Tick on the green Icon(superuser with bones SU)
And tick On Boot and then tick on > 99supercharge.sh
* Done !!
You have now Supercharged you 587 !!
* Dont Forgot !!! *
to make quickwidgets on your homescreen from:
V6 supercharger and 99supercharge.sh with SM
New changelog of upcoming 9 RC11:
Updated Sept 4, 2012: - V6 SuperCharger Update 9 RC11 Test 6
- Fixed - a bug/error in /data/99SuperCharger.sh
- Tweaked - launcher detection
Updated Sept 2, 2012: - V6 SuperCharger Update 9 RC11 Test 5
- Added - Calculation for Dalvik Cache (based on device's RAM)
- Disabled - Misc/3G tweaks by default
- Fixed - a couple of small bugs
- Tweaked - root testing code for all generated scripts
- Tweaked - Interface/Messages and some code
Updated Aug 4, 2012: - V6 SuperCharger Update 9 RC11 Test 4
.................. - Added - Messages for Jelly Bean in ICS Service Centre (webapp needs updating blah blah)
.................. - Tweaked - Launcher Detection
.................. - Tweaked -Interface/Messages
.................. - Fixed - Loop that rookies had.
Updated Aug 4, 2012: - SuperCharger Starter Kit RC12
.................. - Fixed - Will no longer install su binary on JB either... ONLY INSTALLS ON ICS! (Jelly Bean doesn't have the segfault issue anyway)
.................. - Fixed - Previous sqlite3/zipalign installer didn't install zipalign either if sqlite3 was skipped
Updated Aug 1, 2012: - SuperCharger Starter Kit RC11
.................. - Options - Choose what you want to install - one at a time.
.................. - Tweaked - Code for all scripts (more stock rom friendly)
.................. - Tweaked - BusyBox installer (won't interfere with busybox built into some kernels)
.................. - Tweaked - su binary will only install on ICS or Jelly Bean
.................. - Tweaked - sqlite3 script installs a different binary on Jelly Bean.
Updated July 29, 2012: - V6 SuperCharger Update 9 RC11 Test 3
.................. - Tweaked - SuperClean - shouldn't cause isssues anymore
.................. - Tweaked - init.rc search - smarter rc file search.
Updated July 28, 2012: - V6 SuperCharger Update 9 RC11 Test 2
.................. - Fixed - A couple of wheel alignment bugs.
Updated [/U]July 27, 2012: - V6 SuperCharger Update 9 RC11 Test 1
.................................. - Removed - UnKernelizer from menu.
.................................. - Added - 3 Kernel/VM Tweak Options! (Rock Hard, Rock & Roll, Soft Rock)
.................................. - Tweaked - Re-SuperCharger behaviour on startup
.................................. - Added - SD Card Read Speed Tweak (sd card cache) entry to init.rc
.................................. - Improved - Wheel Alignment script.
.................................. - Tweaked - ALOT of code - more efficient and smarter than ever
*That is the change log of 9 RC11, i put the final version here if it is released
Older Changelogs:
Updated July 15, 2012: - V6 SuperCharger Update 9 RC10
.................................. - Improved - Jelly Bean compatibility!
.................................. - Added - BootLoop detection for 99SuperCharger - If it thinks that it's bootlooping, it won't run again until you enable it by deleting /data/!!SuperChargerBootLoopMessage.log
.................................. - Added - Calculated dalvik heap size which is based on devices RAM - found in Miscellaneous Tweaks)
.................................. - Added - SD Card Read Speed Tweak (sd card cache) which is based on devices RAM (you really DON'T need it higher than 1MB - do the tests ) - found in Miscellaneous Tweaks
.................................. - Added - Counter to Wheel Alignment log along with improved statistics and logging.
.................................. - Improved - logging for Detailing script.
.................................. - Improved - logging for Fix Emissions script.
.................................. - Tweaked - Alot of code - should find external storage no matter what (removed SD Card references and put in the system's actual external storage path)
.................................. - Tweaked - Interface (Driving Test PASS/FAIL notification, Boot Loop notification, Tasker warning when bulletproofing launcher, among various other things)
.................................. - Improved - Root check along with the root checks in all generated scripts.
.................................. - Removed - su binary check since updating Superuser and it's su binary fixes the segfaults.
Very Old, Its not so important:
Supercharged services.jar and .odex For ICS 4.0.4 !!
Thanks to: shardul_seth
*Before do this, make a back-up !!
Now you can run v6 supercharger by zeppelinrox and get 100% supercharged ROM..
Original Thread here:
http://forum.xda-developers.com/showpost.php?p=12058585&postcount=1
*Important*
I Copied this files from my own System so i dont know if you get 100% supercharged, so try and let me know, and if it dont work, i pm some members !
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Download the zipfile from services.jar and .odex here (For 587):
http://www.mediafire.com/?d7agnnllf3qt85c
** Otherwise Extract the zip file, and copy Services.jar with right permissions:
Read-Wright
Read
Read
To System/Framework
Reboot
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Download the zipfile from services.jar and .odex here (For 431):
http://www.mediafire.com/?5u65dy88ecbd6mb
Downloadfile Supercharger V6 > 9 RC10 Here:
http://www.mediafire.com/view/?xvit888ceq4ao58
*Dropbox Download Added*
https://dl.dropbox.com/u/94931524/V6_SuperCharger_for_Android-Update9_RC10.sh.pdf
these are the steps to do:
* put the zipfile on your sd card !!
* put the V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf
on your sd card in a new map called root.
* Download Scriptmanager from the playstore
* Open scriptmanager and run as root !!
* flas the zipfile with cwm (that one from mediafire)
* Download Busybox Installer also from the playstore
* install then with busybox v1.19.4 (working with the new 9 RC10)
* then open the scriptmanager and run is as root
* scroll the map ROOT with scriptmanager and tick on the root Icon with the bones
* Tick then on the v6 supercharger and run it
* do what it says and if you must choose 1-31 tick then 6
* He ask now restart your phone, Tick Y
* phone restarts and install the apps again (there will be nothing lost or added)
* Then go the scriptmanager again and go then to
* data
* scroll down under till you see:
99supercharge.sh
* Tick on the green Icon(superuser with bones SU)
And tick On Boot and then tick on > 99supercharge.sh
* Done !!
My Xperia Neo V 100% Supercharged ICS 4.0.4 !!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
#> Dont Mirror Our Files !! <#
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-​

so we should first run the script , then flash the zip , right ?

nv8110 said:
so we should first run the script , then flash the zip , right ?
Click to expand...
Click to collapse
NO !! flash the script then run it with scriptmanager, but make a back up 1st

Pandemic said:
NO !! flash the script then run it with scriptmanager, but make a back up 1st
Click to expand...
Click to collapse
flash the zip file then run the script ?
I've tried that before and I got bootloop .....

nv8110 said:
flash the zip file then run the script ?
I've tried that before and I got bootloop .....
Click to expand...
Click to collapse
what rom you have?
this is for ICS 4.0.4 stock !

Pandemic said:
what rom you have?
this is for ICS 4.0.4 stock !
Click to expand...
Click to collapse
yes I am on 4.0.4

nv8110 said:
yes I am on 4.0.4
Click to expand...
Click to collapse
what you ave done tell me the steps?

Pandemic said:
what you ave done tell me the steps?
Click to expand...
Click to collapse
it's ok now ....
maybe I've been using the wrong files

nv8110 said:
it's ok now ....
maybe I've been using the wrong files
Click to expand...
Click to collapse
alright mate
i edit this now, todo the right steps, im busy with it

Thanks for the guide and links, but I have a question, do I need to keep Script Manager installed after I have Supercharged, or can I remove it?
I'm not sure because S-manager is supposed to run that file in the data-directory every time I boot the phone, right?

Eh my's only 75% supercharged, they state that ics launcher can't be charged....

K4L said:
Thanks for the guide and links, but I have a question, do I need to keep Script Manager installed after I have Supercharged, or can I remove it?
I'm not sure because S-manager is supposed to run that file in the data-directory every time I boot the phone, right?
Click to expand...
Click to collapse
yes mate you must keep it

simplyjustkids said:
Eh my's only 75% supercharged, they state that ics launcher can't be charged....
Click to expand...
Click to collapse
then you ave an app that needs root acces, you must delete that, i had that to with ram manager pro and after delete that app it was working

* put the zipfile on your sd card !!
where is that zip

max_r said:
* put the zipfile on your sd card !!
where is that zip
Click to expand...
Click to collapse
do you see this:
Download < text ?
press on it

And press the thanks peeps ;0
i appriciate it

Pandemic said:
do you see this:
Download < text ?
press on it
Click to expand...
Click to collapse
oh
ok i got it

if I have already run the script before flash the zip, can I just flash it now or do I have to do something else
and one more thing, do i have to use busy box 1.18.2 or can i use newer version like 1.19 or 1.20, i'm now on 1.20

palkia171993 said:
if I have already run the script before flash the zip, can I just flash it now or do I have to do something else
and one more thing, do i have to use busy box 1.18.2 or can i use newer version like 1.19 or 1.20, i'm now on 1.20
Click to expand...
Click to collapse
thats not possible then you will get no supercharge 100%
so you must flash the zip file on 4.0.4 before run the script
and no i advice 1.18.2 because a newer version give some errors, and that stands in the orginal thread to from Zep, i thought you have read that.

Pandemic said:
thats not possible then you will get no supercharge 100%
so you must flash the zip file on 4.0.4 before run the script
and no i advice 1.18.2 because a newer version give some errors, and that stands in the orginal thread to from Zep, i thought you have read that.
Click to expand...
Click to collapse
I'm pretty noob at this, i have read the original thread before but i'm still only understand part of it. And because it's a very long thread I may have missed that part about busybox. After your answer I read it again and found that part but in the thread they have also updated the busybox attachment to v1.19.4 so i'm still a little confused.
In the original thread they said for ICS user u will install the script first then patch the service.jar so I followed and was waiting for someone to successfully patch it.
Now as I've already installed the script, what should I do to reverse it or do I have to flash new firmware again and start from the beginning

Related

[ROM] AndroidLab.it v1.0 - You'll be assimilated!A2sd+720p support+advanced install

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
- FRF91 deodex'ed (thx Paul'O'Brien)
- CyanogenMod Kernel 2.6.34.1
- rooted + busybox (su from Cyanogen + Superuser2.2.2.apk from ChainsDD)
- stock app2sd - FAT 32(from Google )
- optional ext a2sd method with all goodies from darktremor ( see How-to's)
- screen calibration by storm999999
- Advanced install (From djmcnz)
- All important apps (thx djmcnz)
- Hosts file blank [ Hosts.huge contains ad-blocker]
- All APN's names
- Latest ADW-Launcher From Anderwebs ( Mod in arrival)
- fully support Trackball Alert (thx lilHermit)
- tweaked internal auto-killer (thx to androcheck) - better battery life and performance
- my SparePartsMod MOD with some options
- zipaligned (optionnaly at boot)
- custom bootanimation (Nexus One Holiday)
- Trackball wake / Trackball wake & unlock / Trackball Skip (from crimsondr)
- Optional Dalvik2sd
- Optional Dalvik2Cache
- Samsung Galaxy S Live Wallpapers
- Droid X Live Wallpaper
- Customizable Nexus one Live Wallpaper
- Latest Music Mod
- Switch between Black and White bar with my SpareParts!
- Terminal Emulator installed by default
- SIM Toolkit (stk.apk)
- Full adb support
- Wysie contacts MOD
- Modded Updater-script
- Astro file manager
Download Links
I'm Not Responsable for brick devices!
If you like my work and the time that it tooks me, consider buy me a coffee!
AndroidLab.it ROM V1.1 @ AndroidLab Repository
Code:
MD5 Androidlab.it ROM v1.1-signed.zip
7dc9d453a60997f03123c089fbc2e435
AndroidLab.it ROM V1.0 @ AndroidLab Repository
Code:
MD5 AndroidLab.it ROM r1.0 - NoRadio
189721e2c30af8eaf1a19b18137ea987
RADIO Froyo 4.06 Froyo_Radio_Update_Radio_32.36.00.28U_4.06.00.12_7.zip
Code:
MD5 Froyo_Radio_Update_Radio_32.36.00.28U_4.06.00.12_7.zip
180e11abe9cc415ba4df0db10460b5c2
*** Radio 5.08: http://forum.xda-developers.com/showthread.php?t=723839
Installation Guide
Prerequisites:
- Froyo Radio 32.36.00.28U_4.06.00.12_7_PASSION
Installation Guide:
0. Enter in recovery
1. Flash Froyo Radio, if you don't have it yer
2. Do a NANDROID Backup
3. Wipe Data +cache
4. Flash ROM
5. Reboot
How-To
Move Apps to SD card:
Open Spare Parts , click on App2sd and select:
- SDcard (/sdcard )
- Internal ( data/app )
- Auto
This will also have effect on installations from the Market.
To move apps from phone-to-sdcard/sdcard-to-phone, goto Settings/Applications/Manage, select an app and click "Move" button.
Important: Do not put keyboards, launchers, widgets or root apps on the sdcard!
Move Apps to SD card {Ext way} :
a2sd check <- A2sd diagnostic, to see possible problems and config
a2sd install <- Install App2sd and move all apps to SD
a2sd remove <- Remove Apps2sd and move all App to Internal Storage
a2sd nocache <- Move Dalvik Cache to /data
a2sd cachepart <- Move Dalvik Cache to /cache Sposta Dalvik-cache in /cache
a2sd cachesd <- Move dalvik cache to /sd
a2sd zipalign <- run zipalign on boot
a2sd sysinfo < -this will give you a complete overview of your phone. Lots of good information
a2sd swapspace <- this will give you information about your swap space.
a2sd help <- all commands (includind minfree manager)
Mount /System Rw or RO
Open Spare Parts, click on Remount System and choose:
- RO
- RW
Change BootAnimation:
Open Spare Parts and click on BootAnimation:
You can choose Normal BootAnimation or AndroidLab bootanimation!
Change Status Bar Color:
Open Spare Parts and click on StatusBar Color,
Choose BlackBar or WhiteBar ( Vending Process might crash - just ignore it))
Reboot Required!
Use Advanced install (thx to djmcnz thx):
If you create a text file called install.cfg in /sdcard/android/androidlab/ it will be checked during install for the following flags.
Simply type any combination of these flags, each flag on a new line, into the install.cfg file and save it.
noapps - do not install additional Kang-o-rama apps, limit Google apps to basics (see this helpful post by fiftyclick).
launcher2 - will replace ADW.Launcher with Google Launcher2
stockdialer - will replace the phone and contacts mod with the stock apps
nocar - will not install the Car Dock applications
sysapps - will install any apks you leave in /sdcard/android/androidlab/system/ to the /system partition
Release Numbers
1.2.x - Basata sui Sorgenti Android AOSP 2.2 + Modifiche ai source + SpareParts MegaMod
1.1.x - 720p recording + advanced installer
1.0.x - Based on FRF91 - Stable Build
0.5.x - Based on FRF85B
0.4.x – Based on FRF83
0.3.x - Based on FRF72 + Modified Kernel
0.2.x – Based on Froyo FRF50 + deodex
0.1.x – Initial Release
== Credits: ==
- Micho, the bootanimation-maker
- Tshine, for modding Spare PArts
- dsixda for kitchen
- Paul
- leonnib4
-djmcnz
-storm99999
- ChainsDD
anyother that i forgot
== ChangeLog ==
Release 1.1.1
Updated Apps2sd with new options [From Darktremor 2.7.5
Removed 720p recording due instabilty
Added screen calibration
Release 1.1
Fully 720p support!!
Added Samsung Live Wallpapers
Added advanced install (thanks to djmcnz)
Updated Kernel
Updated the apps
Various minor bug fixes
Customizable Nexus Wallpaper
Removed LauncherPRO
Release 1.0
Now Based on FRF91 :
- Added Trackball Wake
- Now based on Paul´s Brand New MCR FRF91 r21 FroYo Release
- ASE + Scripts (Android Script Engine (ASE) + MoDaCo scripts, including @ratson's market speedup fix.)
- New Network Settings for faster 3g switch & better Signal
- Faster Download & Upload Speed
- all Mods Ported to MCR FRF91
-LauncherPro Updated to v0.6.5
-added music mod
-Removed flash player
-added chrome to phone
-updated adw launcher
-updated Launcher Pro
- Media profile set to 800x480
- updated su and busybox
- Holiday Nexus One Bootanimation as default
- Removed battery notify
- Now % is showed in battery icon
- deleted setcpu
- New BlackBar
- updated MusicMod to latest 1.7.5.2
- added nano
- added bash
- added touchwiz launcher
- themed calendar
- deleted netmeter+led
Release 0.3
Now based on MCr r18 FRF72
1)Removed Linpack
2)Updated Maps to 4.3.0
3)Removed Battery Graph
4)Removed Ad-Blocking Hosts file
5)- Better GPS/3G/UMTS/HSDPA & HQ Video Playback values in the build.prop
6)Dalvik-cache head restored to 24MB
7)Added netmeter for led notifications
Here are the colors used:
CPU%-COLOR
<3 - Off
3-15 - blue
16-40 - green
41-75 - amber
>=76 - red
8)Removed OC Pershoot Kernel, it drains battery faster: IntersectR Kernel is now default
9)Added Wireless theter // So much more tweakble!
turned up lock/unlock sound volume
10) 2.6.34 InterSectRaven 800mW BFS 2010_0619_1122 as deafult
11)Tweaked internal autokiller for better performance and better battery life
12)Updated ADW-Launcher to 0.8.7
13) Updated LauncherPro to 0.6.2
Release 0.2 :
- ADW- Launcher 0.8.6
- Launcher Pro 0.6.0
- Black Bar ( like kang-o-rama , not desire black bar)
- Modifyed Hosts file for built-in Ad-Blocking
- /system/app & framework De-odexed
- Su and busybox from cyanogen
- Pershoot Kernel 2.6.34 OC/UV/21MB/XTRA) //
- Included TrackBall Alert and fully working!
- Updated Flash Player to beta 3
- Updated SetCpu to 1.6.0
- Added Battery Notify // IT says to you the battery percent
- Removed Autokiller, it is useless
- Custom Bootanimation
- Quick Boot Removed // Its Functions are included in modded spare parts
- Removed PDF Viewer // It crashes
- Modded Spare Parts
- Updated lib/hw/lights.mahimahi.so for better trackball colors support (from chaindd)
- Browser Icon changed to Chrome Icon
Release 0.1 :
- All tweaks from PAul
- Rodriguezstyle Video Driver V2a
- ADW Launcher 0.7.8
- Updated Market and Flash Player tot the latest version
- Added ASTRO File Manager
- Added AutoKiller
- Added LinPack
- Added Visualizzatore PDF
- Added Quick Boot
- Added setcpu 1.54
- Added Music Mod
- Removed Amazan Mp3 Store,twitter,facebook
- Added HTC_IME
== Screenshoots: ==​
Reserved for future use...
shouldn't you swap the optional kernel step and the rom flash?
kernel then rom == using the kernel in the rom
also, nervous people like me like md5sums for stuff (since you asked for suggestions).
anyhow looks nice...cheers!
any other suggestion for the rom ?
edit: i put md5 string
its 2.1 or 2.2 ?????????
victor711 said:
its 2.1 or 2.2 ?????????
Click to expand...
Click to collapse
2.2 ... I think
Best regards
yes, it is froyo 2.2
very very nice work!
its working great 4 me. but Rarely freezing on d first boot screen.
LauncherPro
Gille1 said:
LauncherPro
Click to expand...
Click to collapse
Sucks compared to the latest ADW.
Part Four said:
Sucks compared to the latest ADW.
Click to expand...
Click to collapse
Disagree.... I say launcherpro
all these froyo mods are the same kind
this one is a close copy of rodriguez style...stop copying them and make one nice froyo rom with all devs combined.
code isnt going to be released soon so might as well work together.
there arent any big framework changes in this or kernal changes
so why bother?
+1 couldn't say it better my self. Maybe except for he shouldn't be making a themed Rom and calling it it's own. IMO
bigballa said:
all these froyo mods are the same kind
this one is a close copy of rodriguez style...stop copying them and make one nice froyo rom with all devs combined.
code isnt going to be released soon so might as well work together.
there arent any big framework changes in this or kernal changes
so why bother?
Click to expand...
Click to collapse
i planned r 0.2, what other things do you suggest ?
b9nez said:
To not continue and just give up
Click to expand...
Click to collapse
Quiet b9nez, the OP is trying to add to the community instead of take away from it with that sort of negativity.
I see your point....I just dont think you had to be so harsh about it.
Just continue....
the codes will seperate all these ROMS soon...
everyone will go their own way of doing things and some will like the route you are going with your ROM.
Keep it up.
v0.2 is arriving!
MrNameless said:
v0.2 is arriving!
Click to expand...
Click to collapse
Does it have to or can it just stay hidden since all your doing is using someone else copy/pasted "rom" and just adding apps. Plus isn't quick office a warez or doesn't XDA care any more?

[GUIDE][UPDATE 22/9] Get a faster optimus one by just using this tweaks!!!

Hi, welcome...
Feeling laggy on your phone? Feeling want to make it fast? Follow this guide and i can proof you that this members create this stuff to make your phone flying or make like a new phone!!! Follow this steps and you will be like ... Enjoy!
This is not my work, I am just giving some cool guides... So.. If you got questions, comment here or go to the following thread below...
Firstly I am going credits to: And also downloads here! For more details, please check their thread and thank them for their work...
-zeppelinrox for the V6 Supercharger Click here to go his thread!
-eoghan2t7 and also Loopy for the Loopy Smoothness Tweaks Click here to go his thread!
-franciscofranco for the best kernel evar!
Secondly, If you want to follow my guide (With every steps pictures) download the files and come back here... If not, go there n stay there!!
Requirements:
-An Optimus One Rooted
-Busybox installed (v1.19.2 or lower!)
-Script Manager (Available in Market) or Terminal Emulator to run the scripts (Script Manager is better though )
-Terminal Emulator
Step 1
Download the following stuffs...
1. The v6 Supercharger scripts...
Go to this thread and go to attachments and download this stuffs which are highlighted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Loopy Smoothness Tweaks
Click here!
Step 2
The SUPERCHARGER (The SEVEN easy steps!)
1.Firstly make sure you had Script Manager on your before starting...
2.The Script which you downloaded, place it in the the root of the sdcard (/sdcard)
3.Open Script Manager
4.Load the script and Run as Root...
5.Touch the screen to bring up the soft keyboard.
6.Then, wait till loading, now you gotta choose which minfrees you want...
7.Once setup, reboot your phone!
~Poof!~ U will see the differences!
Press thanks if i helped(for the picture guide)... And press thanks (or donate) to zeppelinrox, eoghan2t7 and loopy for the stuffs they created and guides...
Which ROM is working with this tweaks?
Android 2.2​-MegaTron
-Devoid
-Void.Final
-OpenOptimus
Android 2.3.3​*Need extra stuff to get this tweaks working
-OpenOptimus v2
-AGA-ROM v1.4
-GB_v20g_v2
(And many more Custom 2.3.3)
Android 2.3.4​-Void.Forever
-CyanogenMod 7 for Optimus T
-Andy's GB 2.3.4 (Phoenix)
Android 2.3.5​-CyanogenMod 7.1 by mik
~v6.5.7
~v6.6.1
-CyanogenMMatt v1.1
-SonyGenMod v1.1 (Coming Soon)
>> Changelogs of V6 SuperCharger & Links / Guide to LS Tweaks >> On Second Post​
Changelogs & Loopy Smoothness Tweaks
Changelogs of V6 SuperCharger Update 9
zeppelinrox said:
Before Updating, Wipe Caches!
Updated September 19: - V6 SuperCharger Update 9 Beta 6.1
Enhanced - Menu. Easier to understand what Ledded and UnLedded means lol
Improved - The automatic backup to SD Card and restore (Re-SuperCharger) from SD Card. I had missed a couple of files
Fixed - A couple of bugs. Mainly the busybox and device memory checks.
Fixed - Issue where in some cases, settings got put in build.prop when local.prop was selected and vice versa.
Added - A check where build.prop will be used if there is no local.prop
Added - Support for devices that use S*(not numbered) boot scripts so S99SuperCharger is created instead of 99SuperCharger
Updated September 14: - V6 SuperCharger Update 9 Beta6
Fixed - Update 5 coding error... SuperCharger build.prop settings got wiped by 99SuperCharger script... lol
Added - Check to see if the launcher sticks!
Back - To using local.prop!
Added - Using build.prop as an option but only if launcher isn't supercharged when using local.prop
Enhanced - User prompts and interface
More - Lenient error checking.... it lets you continue... using the script...
Many - little tweaks...
Updated September 14: - V6 SuperCharger Update 9 Beta5
Added - Alternate REBOOT Method! (Maybe it will work? lol)
Added - OOM Grouping Fix notification under Launcher Status (This is actually a test to see if 99SuperCharger ran on boot!)
Enhanced - Root check. If there is an error, the Help file opens up.
Enhanced - Busybox check. If there is an error, market opens up to BusyBox installer
Many - Bug fixes - Mostly due to finicky busybox versions which would lead to bootloops
Updated September 12: - V6 SuperCharger Update 9 Beta4
Massive - Changes lol
Changed - All the names/presets. More options for higher ram devices.
Added - Help Menu Item (launches help file on sd card)
Added - Help Online - Opens up XDA thread in the browser!
Added - Re-SuperCharger! Restore Prior V6 Settings from SD Card
Added - Saftey nets - Checks for BusyBox, it's version (and if it's too high), an error check, and if running as root
Checks RAM - And recommends which horsepower settings to use
Build.prop - is now used. No more local.prop. This enhances stickiness.
Extra - build.prop integration in case you have /system/bin/build.prop
Milestones - More stickiness - init.d script and build.prop are now used as well as the *rc file
Tweaked - some user prompts/information
Numerous - enhancements
Code:
\\\\\\\\ V 6 S U P E R C H A R G E R - M E N U ////
==============================================
1. SuperCharger & Launcher Status for Update 9
==============================================
2. 256HP Ledded {6,8,22,24,26,28 mb}
3. 256HP UnLedded {6,8,26,28,30,32 mb}
4. 256HP Super UnLedded {6,8,28,30,35,50 mb}
==============================================
5. 512HP Ledded {6,12,40,60,80,100}
6. 512HP UnLedded {6,12,55,75,95,125}
7. 512HP Super UnLedded {6,12,75,100,125,150}
==============================================
8. 768HP Super UnLedded{6,12,150,175,200,250}
9. 1000HP Super UnLedded{6,12,200,225,250,300}
===============================================
10. Cust-OOMizer Settings {Create Or Restore!}
===============================================
11. OOM Grouping Fixes + Hard To Kill Launcher
12. OOM Grouping Fixes + BulletProof Launcher
===============================================
13. UnKernelizer - UnDo Kernel/Memory Tweaks
14. UnSuperCharger
===============================================
15. BulletProof App! {Hit or Miss}
16. Engine Flush - Quick Boost & Eliminate Lag!
17. Nitro Lag Nullifier {Experimental}
18. Use V6 SuperCharger with Terminal Emulator!
===============================================
19. Help File!
20. Help Online!
21. Options
22. Re-SuperCharger!{Restore Prior V6 Settings}
23. REBOOT! (WARNING - There is NO Warning!)
24. Exit
Updated September 3: - V6 SuperCharger Update9 Beta3
Fixed - Cleaning of local.prop. It was leaving a mess behind.
Enhanced - User notification of events a little more
Updated September 1: - V6 SuperCharger Update9 Beta2
Fixed - A couple of bugs some people experienced
Tweaked - Nitro Lag Nullifier (caused connection issues for some)
Menu - Tells you if it's working or not
Added - A new tip to help file (you can make a SM widget for 99SuperCharger - easy application if all else fails lol)
Updated August 21: - V6 SuperCharger Update9 Beta1
Remembers - scrolling speed. You can change it under Options (#19)
Added - BulletProof App!
Added - Engine Flush - Quick Boost & Eliminate Lag!
Added - Nitro Lag Nullifier (Experimental)
Added - Options (Change scrolling speed)
More Compatible - Backs up build.prop and cleans ADJ and MEM values from it - some roms are pesky that way
Click to expand...
Click to collapse
Changelogs of KickAssKernelizer
zeppelinrox said:
Updated September 12: - Kick Ass Kernelizer Installer Update 3 test5
All-In-One - io scheduling tweaks are optional
Data Foler - is now used for stock roms
Errors - are now hidden so no need to worry about unknown keys showing up
Enhanced - user interface greatly
Tweaked - some io scheduler commands - should be safer than before
Updated September 4: - 98KickAssKernelTweaksInstallerUpdate3 test4
Tweaked - io scheduling tweaks some more so that it is even more selective and safer
Updated September 3: - 98KickAssKernelTweaksInstallerUpdate3 test3
Fixed - A big error (I doubt the io scheduling tweaks were being applied in Update 3 test 2)
Improved - Application of io scheduling tweaks so that it is much more selective and safer
Runs - 98kickasskernel after creating 98kickasskernel!
Notifies - You of the I/O Scheduler in use - Before AND After running 98kickasskernel
Defaults - To using Deadline (of available) instead of Noop io schedular.
Updated August 1: Added Kick Ass Kernel Tweak Installer but without io scheduler tweaks. Use this new script if you try the regular Kick Ass Kernel Tweak Installer and get a boot loop! (My apologies to those that got the boot loops )
Updated July 26: Both are more user friendly with information being given along with an "All done" message
....................... Hopefully fixed the syntax error in 98kickass kernel for some people
Click to expand...
Click to collapse
Well i dont need to copy n paste type, just go to this thread and follow every instructions...
You never see the 97loopysmoothnesstweak in your /system/etc/init.d? Do this!
1. Get a Root Explorer (Get it somewhere, or PM me!)
2. Download the script above...
3. Copy it to ur sdcard...
4. Open root explorer
5. Extract the zip file
6. Copy the '97loopy_smoothness_tweak'
7. to /system/etc/init.d
8. Set permission to '777'
Done!!! The rest, please go to the thread.... Press thanks if i helped and press thanks to zeppelinrox, loopy and eoghan2t7...
thanks... i was about to throw ma laggy phone LG optimus one... after using above script... Ma phone is now having super fast i really love this now... thanks allot...
you gave a nice tuto
nice tutorial , mate
these 2 scripts makes our phone flyin
samcad said:
thanks... i was about to throw ma laggy phone LG optimus one... after using above script... Ma phone is now having super fast i really love this now... thanks allot...
you gave a nice tuto
Click to expand...
Click to collapse
Ur welcome...
Sent using LGE Xda Secret phone
arielxarg said:
nice tutorial , mate
these 2 scripts makes our phone flyin
Click to expand...
Click to collapse
Thanks... I will find more to make our phone faster...
Sent using LGE Xda Secret phone
Can this work on void#forever+Franco 19.2kernel?
My phone is pretty stable and fast(neocore 68fps). What lags will it prevent?
anand.k.s said:
Can this work on void#forever+Franco 19.2kernel?
My phone is pretty stable and fast(neocore 68fps). What lags will it prevent?
Click to expand...
Click to collapse
Meh, is jus increasing performance...
Sent using LGE Xda Secret phone
what's next after setting scrolling speed? it seems like nothing is happening or loading?or am i missing something,.i typed 2 on the setting,.and then??? how to get to step 7? thanks!
how can i undo this thing??
gurpreet9080 said:
how can i undo this thing??
Click to expand...
Click to collapse
i believe you just need to reflash your rom
Sent from my LG-P500 using XDA Premium App
sweetnsour said:
i believe you just need to reflash your rom
Click to expand...
Click to collapse
Would not it be a whole lot simpler to simply delete the /system/etc/init.d/97zomgthiswillmakemyphoneflyandcrashlikehell script?
dr.notor said:
Would not it be a whole lot simpler to simply delete the /system/etc/init.d/97zomgthiswillmakemyphoneflyandcrashlikehell script?
Click to expand...
Click to collapse
all this time I've been reflashing my rom just to find out that there was an easier way to do it...what a great waste of time
sweetnsour said:
all this time I've been reflashing my rom just to find out that there was an easier way to do it...what a great waste of time
Click to expand...
Click to collapse
LOL... Well, for the SuperCharger! thing, the self-destruct mode seems to be running the thing and choosing options 13, 14 and 15 in this order. The other one, did not check yet. EDIT: And will not check until someone uploads it to a less idiotic filehosting site than mediafire.com. Tired of their "Processing download request..." loop. Ktnxbye.
Does this really help????
dr.notor said:
LOL... Well, for the SuperCharger! thing, the self-destruct mode seems to be running the thing and choosing options 13, 14 and 15 in this order. The other one, did not check yet. EDIT: And will not check until someone uploads it to a less idiotic filehosting site than mediafire.com. Tired of their "Processing download request..." loop. Ktnxbye.
Click to expand...
Click to collapse
Well something wrong wit mediafire.... I will attach using dropbox...
Sent using LGE Xda Secret phone
ashishv said:
Does this really help????
Click to expand...
Click to collapse
Truely ya...
Sent using LGE Xda Secret phone
roi14 said:
what's next after setting scrolling speed? it seems like nothing is happening or loading?or am i missing something,.i typed 2 on the setting,.and then??? how to get to step 7? thanks!
Click to expand...
Click to collapse
Wich rom r u in?
Sent using LGE Xda Secret phone
Battery
Does this improve battery life
Pstrain561 said:
Does this improve battery life
Click to expand...
Click to collapse
I highly doubt it.

[Tutorial][24/5][U9T11][ICS]V6 SUPERCHARGER And ICS OOM Priority Changer PATCH UPDATE

Mika Dee said:
Hi farhan can you please guide me how to install supercharger on nAa ICS? Thanks
Click to expand...
Click to collapse
Yeah sure
PLEASE READ EVERYTHING CAREFULLY BEFORE ASKING QUESTIONS
All Credits go to zeppelinrox for his magnificent script
*1st go look at this thread and the 2nd post: Original thread & 2nd post
*Follow these steps to Patch your service.jar file for OOM Priority change:
1. via root browser go to /system/framework/
2. copy the services.jar to the sdcard and then copy it to ur PC
3. go here http://android.mimic.ca/
4. upload ur services.jar file
5. a new page will appear... select the CWM flashable zip and download..
6. copy the zip to sd card and read below
**Patched "services.jar" CWM Flashable Zip for MiniCM9-3.0.2 available for download. See attachments
Download supercharger from the link at the end and save this in the root of your SD card.
zeppelinrox said:
IMPORTANT....Note: You will probably get Segmentation Fault errors running the V6 SuperCharger script on ICS due to some funky stuff going on with the su (superuser) binary. Go HERE for a fixed su binary. No more fugly segfaults! - Thanks to wraithdu
Click to expand...
Click to collapse
Now follow this steps:
0. Download Script manager from the market.
1. Run the script via Script manager as ROOT
2. Recommended Options for RAM management 256HP--> Ledded(3), Unledded(2), Super Unledded(4)
3. Recommended Options for LAG kIlling: Engine Flash(18), Detailing databases(19)
For SOME reason U cant run script manager.... THEN LETS IMPROVISE:
0. via file manager find the supercharger script file and copy the whole name (with extension)
1. go to terminal emulator
2. write:
Code:
su
{press enter}
3. write:
Code:
cd /sdcard/
{press enter}
4. write:
Code:
sh V6_SuperCharger_for_Android-Update9_RC7.sh.pdf
[u have pasted the name]{press enter}
NOW:
# After applying RAM minfree values you'll be asked to Wipe delvik cache and reboot. and YES u need that...
# U said YES ... Now your delvik cache is wiped and it rebooted.
# ITS TIME TO MAKE UR LAUNCHER DIE-HARD! So Enter CWM Recovery and Flash the previously prepaired zip. REBOOT.
# This time it will take some time to boot as Delvik cache has been wiped and has to be rebuild.
NOW Dealing with Stickiness of your applied Minfree values:IMPORTANT
#Run the Script again.
#U will see that it says about a percentage of supercahged-ness...
#If ur applied minfree values has not sticked a file will open which will say what to do to make these values fixed.
{For this u'll need script manager}
0. open script manager
1. go to /system/etc/init.d/
2. u'll see a file named "99supercharge" click on it...
3. give it the permission for ROOT and RUN AT BOOT and run.
4. script manager will run at every boot and fix ur minfree values.
WARNING: IF Script manager Can Not Run at boot for some reason minfree values will not be applied.
LAG KILLING:
Two options i use to kill lag. : 1. Engine Flush (18)
2. Detailing A.K.A Vaccuming (19)
# If u Run these from the main script a terminal emulator shortcut will be created
# after days of use if u feel choppy and laggy u can apply them via terminal emulator
Detailing/Vaccuming:
[info: this will re-index ur databases to make ur phone faster]
Open terminal emulator
Code:
su
{press enter}
Code:
vac
{press enter}
DONE!!
Engine Flush:
Open terminal emulator
Code:
su
{press enter}
Code:
flush
{press enter}
DONE!!!
Enjoy it... like a boss!
zeppelinrox said:
Updated April 10, 2012: - V6 SuperCharger Update 9 RC8.2
.................................... - Fixed - Bug when trying to apply calculated values automatically on rookies' first run - it would just loop back to menu
.................................... - Fixed - Bug regarding fix emissions option when resupercharging.
.................................... - Fixed - Bug regarding the installation marker in build.prop.unsuper.
.................................... - Improved - Has proper rounding of decimals instead of just truncating them. This was a royal pain in the ass.
.................................... - Enhanced - User prompts. No more confusion regarding the "applet not found" note
.................................... - Tweaked - Method by which /init.d/*97BulletProof_Apps is launched.
.................................... - Tweaked - Code a bit
Updated April 03, 2012: - V6 SuperCharger Update 9 RC8.1
.................................... - Fixed - Bug where the script appied all 0s for the minfrees
.................................... - Fixed - Bug where the script would crash when supercharging current minfrees that had a decimal value (ie. 32.532 MB was bad)
Updated April 02, 2012: - V6 SuperCharger Update 9 RC8
.................................... - Added - Fix Emissions Script! (Fix Permissions)
.................................... - Added - Option to run Fix Emissions on boot! (Does NOT slow down boot time!)
.................................... - Removed - Market links to BusyBox Installer (suddenly half assed busybox builds are running rampant ;p)
.................................... - Added - Link to my OP to get BusyBox builds compiled by wraithdu instead (So There! smali ass busybox builds!)
.................................... - Added - Automatic direction to use calculated values for Rookies! (after selecting Driver Options)
.................................... - Added - Support for a couple of more launchers
.................................... - Tweaked - Delay time in *97BulletProof_Apps - reduced to 30 seconds from 60 seconds. Shouldn't effect battery life since it still goes to deep sleep as it always does.
.................................... - Tweaked - Method by which /init.d/*97BulletProof_Apps is launched.
.................................... - Tweaked - Interface and user prompts.
.................................... - Changed - "Help File" to "Owner's Guide"
.................................... - Removed - Most DNS Tweaks (too many weird connection issues started happening)
.................................... - Tweaked - net.tcp.buffersize.* settings
.................................... - Changed - "Market" to "Google Play"
Click to expand...
Click to collapse
Downloads:
Mirrors are discoraged
V6 supercharger Updates (the latest are at the last of the post)
This thread will be updated with each update of of the original thread
THIS IS EXACTLY WHAT IM WAITING FROM YOU ![Coz im read at Minicm9 thread you Talking About this] LOL
Thanks dude, [Thanks overlimit, Hit Soon ]
Shimizux said:
THIS IS EXACTLY WHAT IM WAITING FROM YOU ![Coz im read at Minicm9 thread you Talking About this] LOL
Thanks dude, [Thanks overlimit, Hit Soon ]
Click to expand...
Click to collapse
no prob. dude! enjoy!
Cannot download the attached .pdf file.
Dude,
IF, I change, flash a new rom [ICS ROM]
Do i need Upload my service.jar again?
Or i can use same service.jar file and Just Flash via CWM in New Costum ICS Rom ? Just in case.
virajt said:
Cannot download the attached .pdf file.
Click to expand...
Click to collapse
Yep, Failed to Load PDF Document.
why it is in .pdf not .sh?
can you also upload the patch service.jar you used in nAa ICS.
Thanks
working on it... i can download the files btw!
and its in .sh.pdf
it is recognized as script anyway!
Shimizux said:
Dude,
IF, I change, flash a new rom [ICS ROM]
Do i need Upload my service.jar again?
Or i can use same service.jar file and Just Flash via CWM in New Costum ICS Rom ? Just in case.
Yep, Failed to Load PDF Document.
Click to expand...
Click to collapse
yes u hav to patch it again...
mediafire mirror updated!
Dude,
I run Script with Terminal Emulator,
But it Always Need for me to choose Option [1-30]
Idk, What option should i choose,
Then yeah i choose option 30,
Some Command appear,
And "Buh Bye :")"
LOL! No Command for to Wipe Dalvik Cache. =.=
Shimizux said:
Dude,
I run Script with Terminal Emulator,
But it Always Need for me to choose Option [1-30]
Idk, What option should i choose,
Then yeah i choose option 30,
Some Command appear,
And "Buh Bye :")"
LOL! No Command for to Wipe Dalvik Cache. =.=
Click to expand...
Click to collapse
that command is "super clean" on the list. "29"
and i've written the options recommended in OP with number!
farhanzahinfj said:
that command is "super clean" on the list. "29"
and i've written the options recommended in OP with number!
Click to expand...
Click to collapse
Then i Should Run Script Again,
Thanks.
Edit : Should i choose unleaded? or choose 3 of them?
to download just right click on the first link and save as option.
Trying
Shimizux said:
Then i Should Run Script Again,
Thanks.
Edit : Should i choose unleaded? or choose 3 of them?
Click to expand...
Click to collapse
Only one will work... its like 3 options one answer... chose super unledded for more free memory... read the things the script is saying... u'll understand!
Sent from my E15i using XDA
farhanzahinfj said:
Only one will work... its like 3 options one answer... chose super unledded for more free memory... read the things the script is saying... u'll understand!
Sent from my E15i using XDA
Click to expand...
Click to collapse
Yezza ! i already choose Option 4
Works great !
Thanks Again Man
I'm not on ICS, but I don't understand the playful options in the v6 supercharger and what each of them does (in layman please). If you have any link for help, please share it=). thanks
wakoko79 said:
I'm not on ICS, but I don't understand the playful options in the v6 supercharger and what each of them does (in layman please). If you have any link for help, please share it=). thanks
Click to expand...
Click to collapse
go to the original thread... link in the OP
Thread Updated! new script update9 RC8.... changelog added... fixes for superuser binary !!
Updated V6 U9RC8.1
I got syntax error on line 5555! In both 8.1 and 8 scripts.

[Edited][Tweak][11-06-12]Supercharger V6 For Stock ICS 4.0.4, For 587

* Read this to supercharge 587 *
Download of the V6_SuperCharger_for_Android-Update9_RC11_Test_6.sh
in attechment and save as
1st of all, I did this to get 100% Supercharged on 587 !!
I installed scriptmanager from the playstore
Open the file and give it root acces so run as root
Then i download the starterskit RC12 from Wraithdu!
Also here: http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Alright here we GO !!
* Extract the zip and put the folder SuperCharger_Starter_Kit
on your sd card called ROOT
* With Script Manager, just run StartMeUp.sh to install everything at once.
* So now you have installed the new Busybox 1.19.4 by Wraithdu.
* Then run the V6_SuperCharger_for_Android-Update9_RC11_Test_6.sh again
With scriptmanager
*It will ask for your service.jar: Download (A) Automatic or (M) Manuel?
Choose A(Automatic)
* After that your device will reboot and install the apps again
* No worries you will get nothing to lose !! ^^
* Put the V6_SuperCharger_for_Android-Update9_RC11_Test_6.sh in a folder called ROOT on your sdcard
* Then run the V6_SuperCharger_for_Android-Update9_RC11_Test_6.sh again
* Now it will ask set you speed (1, 2, or 3)
* Choose 1 fast
* Then is ask questions with Yes or No
* Choose all Y (Yes)
* Almost Done
* Then you get choises from 1 t/m 33
* Choose 6 (Ledded)
* when that is done
* Exit (33)
* Then go the scriptmanager again and go then to
* data
* scroll down under till you see:
99supercharge.sh
* Tick on the green Icon(superuser with bones SU)
And tick On Boot and then tick on > 99supercharge.sh
* Done !!
You have now Supercharged you 587 !!
* Dont Forgot !!! *
to make quickwidgets on your homescreen from:
V6 supercharger and 99supercharge.sh with SM
New changelog of upcoming 9 RC11:
Updated Sept 4, 2012: - V6 SuperCharger Update 9 RC11 Test 6
- Fixed - a bug/error in /data/99SuperCharger.sh
- Tweaked - launcher detection
Updated Sept 2, 2012: - V6 SuperCharger Update 9 RC11 Test 5
- Added - Calculation for Dalvik Cache (based on device's RAM)
- Disabled - Misc/3G tweaks by default
- Fixed - a couple of small bugs
- Tweaked - root testing code for all generated scripts
- Tweaked - Interface/Messages and some code
Updated Aug 4, 2012: - V6 SuperCharger Update 9 RC11 Test 4
.................. - Added - Messages for Jelly Bean in ICS Service Centre (webapp needs updating blah blah)
.................. - Tweaked - Launcher Detection
.................. - Tweaked -Interface/Messages
.................. - Fixed - Loop that rookies had.
Updated Aug 4, 2012: - SuperCharger Starter Kit RC12
.................. - Fixed - Will no longer install su binary on JB either... ONLY INSTALLS ON ICS! (Jelly Bean doesn't have the segfault issue anyway)
.................. - Fixed - Previous sqlite3/zipalign installer didn't install zipalign either if sqlite3 was skipped
Updated Aug 1, 2012: - SuperCharger Starter Kit RC11
.................. - Options - Choose what you want to install - one at a time.
.................. - Tweaked - Code for all scripts (more stock rom friendly)
.................. - Tweaked - BusyBox installer (won't interfere with busybox built into some kernels)
.................. - Tweaked - su binary will only install on ICS or Jelly Bean
.................. - Tweaked - sqlite3 script installs a different binary on Jelly Bean.
Updated July 29, 2012: - V6 SuperCharger Update 9 RC11 Test 3
.................. - Tweaked - SuperClean - shouldn't cause isssues anymore
.................. - Tweaked - init.rc search - smarter rc file search.
Updated July 28, 2012: - V6 SuperCharger Update 9 RC11 Test 2
.................. - Fixed - A couple of wheel alignment bugs.
Updated [/U]July 27, 2012: - V6 SuperCharger Update 9 RC11 Test 1
.................................. - Removed - UnKernelizer from menu.
.................................. - Added - 3 Kernel/VM Tweak Options! (Rock Hard, Rock & Roll, Soft Rock)
.................................. - Tweaked - Re-SuperCharger behaviour on startup
.................................. - Added - SD Card Read Speed Tweak (sd card cache) entry to init.rc
.................................. - Improved - Wheel Alignment script.
.................................. - Tweaked - ALOT of code - more efficient and smarter than ever
*That is the change log of 9 RC11, i put the final version here if it is released
Older Changelogs:
Updated July 15, 2012: - V6 SuperCharger Update 9 RC10
.................................. - Improved - Jelly Bean compatibility!
.................................. - Added - BootLoop detection for 99SuperCharger - If it thinks that it's bootlooping, it won't run again until you enable it by deleting /data/!!SuperChargerBootLoopMessage.log
.................................. - Added - Calculated dalvik heap size which is based on devices RAM - found in Miscellaneous Tweaks)
.................................. - Added - SD Card Read Speed Tweak (sd card cache) which is based on devices RAM (you really DON'T need it higher than 1MB - do the tests ) - found in Miscellaneous Tweaks
.................................. - Added - Counter to Wheel Alignment log along with improved statistics and logging.
.................................. - Improved - logging for Detailing script.
.................................. - Improved - logging for Fix Emissions script.
.................................. - Tweaked - Alot of code - should find external storage no matter what (removed SD Card references and put in the system's actual external storage path)
.................................. - Tweaked - Interface (Driving Test PASS/FAIL notification, Boot Loop notification, Tasker warning when bulletproofing launcher, among various other things)
.................................. - Improved - Root check along with the root checks in all generated scripts.
.................................. - Removed - su binary check since updating Superuser and it's su binary fixes the segfaults.
Very Old, Its not so important:
Supercharged services.jar and .odex For ICS 4.0.4 !!
Thanks to: shardul_seth
*Before do this, make a back-up !!
Now you can run v6 supercharger by zeppelinrox and get 100% supercharged ROM..
Original Thread here:
http://forum.xda-developers.com/showpost.php?p=12058585&postcount=1
*Important*
I Copied this files from my own System so i dont know if you get 100% supercharged, so try and let me know, and if it dont work, i pm some members !
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Download the zipfile from services.jar and .odex here (For 587):
http://www.mediafire.com/?d7agnnllf3qt85c
** Otherwise Extract the zip file, and copy Services.jar with right permissions:
Read-Wright
Read
Read
To System/Framework
Reboot
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Download the zipfile from services.jar and .odex here (For 431):
http://www.mediafire.com/?5u65dy88ecbd6mb
Downloadfile Supercharger V6 > 9 RC10 Here:
http://www.mediafire.com/view/?xvit888ceq4ao58
*Dropbox Download Added*
https://dl.dropbox.com/u/94931524/V6_SuperCharger_for_Android-Update9_RC10.sh.pdf
these are the steps to do:
* put the zipfile on your sd card !!
* put the V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf
on your sd card in a new map called root.
* Download Scriptmanager from the playstore
* Open scriptmanager and run as root !!
* flas the zipfile with cwm (that one from mediafire)
* Download Busybox Installer also from the playstore
* install then with busybox v1.19.4 (working with the new 9 RC10)
* then open the scriptmanager and run is as root
* scroll the map ROOT with scriptmanager and tick on the root Icon with the bones
* Tick then on the v6 supercharger and run it
* do what it says and if you must choose 1-31 tick then 6
* He ask now restart your phone, Tick Y
* phone restarts and install the apps again (there will be nothing lost or added)
* Then go the scriptmanager again and go then to
* data
* scroll down under till you see:
99supercharge.sh
* Tick on the green Icon(superuser with bones SU)
And tick On Boot and then tick on > 99supercharge.sh
* Done !!
My Xperia Neo V 100% Supercharged ICS 4.0.4 !!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
#> Dont Mirror Our Files !! <#
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-​
hey
for:
"put the V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf on your sd card in a new map called root."
what do yo mean by new map
and i dont quite understand what you mean with:
"scroll the map ROOT with scriptmanager and tick on the root Icon with the bones"
one more question, are we suppose to keep the file as a pdf?
Where's the flashable zip?
I missed the link. Sorry!
Is this already with patched Services.jar and .odex for ICS or no need?
And where is the flashable zip file?
.
piggybomb said:
hey
for:
"put the V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf on your sd card in a new map called root."
what do yo mean by new map
and i dont quite understand what you mean with:
"scroll the map ROOT with scriptmanager and tick on the root Icon with the bones"
one more question, are we suppose to keep the file as a pdf?
Click to expand...
Click to collapse
creating a new map and call it in root and what i mean that is the SU so click on that mate,
save as pdf not so hard to understand mate
i edit the OP
datagubben said:
Is this already with patched Services.jar and .odex for ICS or no need?
And where is the flashable zip file?
.
Click to expand...
Click to collapse
yes just download the the zip file and i edit the OP !!!!
It says "Your Busybox is an epic fail" in script manager (and I installed busybox 1.18.2)
Not working on LT15i with ICS .431 firmware.
datagubben said:
It says "Your Busybox is an epic fail" in script manager (and I installed busybox 1.18.2)
Not working on LT15i with ICS .431 firmware.
Click to expand...
Click to collapse
Hmm thats very weird, maybe another knows it, i gonna now to sleep, sorry mate.
datagubben said:
It says "Your Busybox is an epic fail" in script manager (and I installed busybox 1.18.2)
Not working on LT15i with ICS .431 firmware.
Click to expand...
Click to collapse
It's missing applets/functions like awk or sed or pgrep.
And the script actually TELLS YOU THIS... so why you suprised?
And where did you get that version?
From one of the market apps?
can this be used with xperia mini pro
Sent from my SK17i using XDA
I get a different problem
My minfrees are apparently all set to 1 (1, 1, 1, 1, 1, 1), and I can't change them, the supercharger closes when it tries to change the minfrees.
Why?
Sent from my LT15a using XDA
Pandemic said:
creating a new map and call it in root and what i mean that is the SU so click on that mate,
save as pdf not so hard to understand mate
i edit the OP
Click to expand...
Click to collapse
by map do you mean folder?
piggybomb said:
by map do you mean folder?
Click to expand...
Click to collapse
Yes, and peeps this is for STOCK ICS 4.0.4 !, i dont know if it run on modified roms
Thank you very much! It works perfect for me using .431 stock kernel.
is it working in all versions of android ? or just in ics ?
NICE... successfully supercharge 100% my LT15i official 4.0.4
slinkyzone said:
NICE... successfully supercharge 100% my LT15i official 4.0.4
Click to expand...
Click to collapse
good to hear mate
so i see it works on Arc
amintox said:
is it working in all versions of android ? or just in ics ?
Click to expand...
Click to collapse
Read the OP please !!
Only for ICS 4.0 4 !!
Sent from my Neo V with Supercharged ICS 4.0.4
amintox said:
is it working in all versions of android ? or just in ics ?
Click to expand...
Click to collapse
On non ICS, it's easier - all you need to run is the script itself to supercharge 100%.
Patching services.jar or services.odex is not needed.
I tried using the procedure and is very similar to gingerbread but I do not understand this step:
* Flas the zipfile with cwm (that one from mediafire) need? What does it mean? you can make a more detailed guide?

[FIX'D][GSM ][MULTIBOOT]AtoMic Doge 7.1 B2 Preview[Very Improve, Much Amaze, Wow]

-----------------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-----------------------------------------------------------------------------------------
This Rom works for Locked and Unlocked Bootloaders!
This Rom is Multiboot-Aware
-----------------------------------------------------------------------------------------
Very Improve. Much Xposed.
App Settings. Themes. Wow
-----------------------------------------------------------------------------------------
Introduction
Welcome to Custom Atomic GB
The aim of this thread is to enhance the older ROM of Atomic GB and improve
it with new tweaks, settings and enhancements to provide an ultimate stock
themed experience.
Warning : This is a one off release until I get hold
of my Nexus 5 back from Repair,
but any bugs or somewhat major problems
I will fix if necessary.
For right now this is B2 / Beta 2 or simply pre release, there are still more things I need to
amend add and change.
This is the real thing.
But the next thing will be even more real.
It is highly recommended you use Extreme Kernel :good:
-----------------------------------------------------------------------------------------
Recommendations
1. If you use Extreme kernel use the Market Fix app provided if you have any play store Issues.
2. After first boot allow the device to be on for about 5 minutes then reboot (this is so init.d scripts can do their jobs).
3. Upon boot go to Settings>Applications>Running Services and Force Stop/Kill everything apart from settings and keyboard,
this is to remove the unnecessary background processes and is safe as the killed processes.
are cached and will resume when necessary i.e This will not kill your lockscreen, neither will it stop its notifications from functioning. (don't do it with an Task Killer)
-----------------------------------------------------------------------------------------
Credits
XtremeSilencer
Jader 13254
Flameno
Sammisayshello
Lambgx02
Limeunlimited
johnnzey
and more in the changelogs...
-----------------------------------------------------------------------------------------
Atomic GB 7.1 B2 Prerelease
-----------------------------------------------------------------------------------------
Features
BASE
(I sorta need to update this section, there's even MORE stuff...)
xLOUD
Rooted
Deodexed
ClockWorkMod
Performance Tweaks
Ram Tweaks
Kernel Tweaks
Network and 3G Tweaks
Stock Icons
Stock Layouts
Improved Stock Status Bar
Stock Widgets
Mobile Bravia Engine
Swipe-to-Remove Notifications
Multi-Boot Aware
Compatible with CWM
Compatible with TWRP
Compatible with DoomLord Kernel
Compatible with Extreme Kernel
Compatible with Turbo Kernel
Compatible with Lupus GB Kernel (Recommended)
Compatible with Lupus Stock ICS/GB Kernel
Compatible with AdrenoBooster
EXTENDED
This isn't my Gin2Jellybean 1.9.9 Custom.
In other words.
(sssh everything's already in the ROM - for now)
ADDONS
Maybe Later.
-----------------------------------------------------------------------------------------
Changelog
Code:
Changelog :
[U]Original[/U]
[hide]
AtoMic GB 1.0
initial release
AtoMic GB 1.5
Custom boot animation - thanks limeunlimited
new transparent system ui with quickpanel settngs
full xperia t and xperia s icons
themed a bit settings
new 7 screen home launcher
new xperia s default themes
fixed smart dialer
fixed rotation
zip alligned apps
wallpapers included into rom
hdmi fixed
xperia s theme included
updated some tweaks
minor bug fixes
AtoMic GB 2.0
5 screen launcher
added preferences
debloated more
removed bugs
system ui fix included
3g tweak
4*5 launcher
smoothness tweaks
no lag
ram fully optimized
AtoMic GB 3.0
based on 1.0
re-tweaked
updated tweaks
fully tweaked build.prop
smoothness to max
camera mod
music libs
i am sure this is better than 1.0! :P
some 3g network tweaks
new framework! thanks emannxperia! i will add you in credits
video playback smoother
minor bug fixed
AtoMic GB 3.5
new circle battery mod
new cool blue system UI thanks emannxperia
all new tweaks for ram and performance
removed battery eating tweaks
fixed build.prop
fixed all redraws
now no redraws 100%
AtoMic GB 4.0
new themes
new framework fully modded
removed ugly system UI
added new system UI with 2g/3g toggle add it from quick panel
removed ugly battery mod and added simple battery mod
added kill app back button mod
added xperia s lockscreen
added music control from lockscreen
also added fully working quick panel settings
fixed import from simcard
some fc fixed
added build.prop tweaks for camera
new beautifull live wallpapers!!
AtoMic GB 5.0
all icons have been changed to xperia S icons
removed the launcher lags
fixed the alarm and added the app in drawer
New camera drivers
enhanced deep sleep
new power management tweaks..
tried to fix timescape
xperia z themes!
AtoMic GB 7.0
Built From Scratch
Rubbish tweaks cleaned
Included all optimized tweaks
Changed Icons [ See Screenshots ]
Rethemed
New smoothness Tweaks
Framework.jar changed a bit
fixed bugs
New Adreno Tweaks
Makes your xperia a dual core device
Ported to the PLAY by johnnzey
Multiboot aware
AtoMic GB 7.0 - PLAY r2
Optimized for the PLAY
AdrenoBooster v0.6 (Should fix blackscreen problem)
Fixed lockscreen
Various bug fixes
Removed a little bit of bloatware
Possibly final version[/hide]
[U]Custom :[/U]
[B]Atomic GB 7.1B1[/B]
-Added AdrenalineBoost ('su' then 'boost' in terminal to use it)
-Optimized all PNGs and JPGs within the ROM. (More RAM and less Space used)
-ROM is now smaller (11MB) and about (15MB) when decompressed. (Nothing was removed in the process of this)
-Hopefully freed up a good amount of RAM
-General Tweaks & Changes
-General additions such as Zipalign Libs and other scripts.
[B]File / Structure Changes :[/B]
[U]Build.prop[/U]
Additions/Amendments
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
debug.sf.hw = 1
logcat.live=disable
dalvik.vm.heapsize=64m
dalvik.vm.heapgrowthlimit=40m
dalvik.vm.heapstartsize=5m
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
debug.overlayui.enable=1
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
ro.config.hw_fast_dormancy=1
persist.sys.ui.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
ro.kernel.checkjni=0
--------------------------------------------------------------
[U]Init.d[/U]
Added
-ReadAheadandLMK (01) @NiLiMAhOnA (Taken from IcEdBean)
-VMTweaks (02)
-RamBooster (03) (Part of AdrenalineBoost Engine) All credit to @Imbawind
-LogCleaner (04) @Slaid480
-SystemZipAlign (05) @Slaid480
-ZipAlignData (06) @Slaid480
-SQLiteVacuumandReindex (07)
-AggresiveEntropy (08) @Exit_Only
--------------------------------------------------------------
System/xbin
+entro
+rngd
+zipalign
--------------------------------------------------------------
Any other changes done I probably forgot by now :/
[U]Atomic GB 7.1 B2 Pre Release[/U]
-More build.prop additions.
-ROM is now bigger (to fill up the useless free space in /system
-Custom Themes (Ported from my old Gin2JbExtended)
-Updated Gapps (Ones in previous releases were old)
-Replacing Settings App.
-Hopefully "different" framework Animations
-Fixed broken Superuser from original ROM
-Added Jellybean Sounds.
-Optimized APKs further.
-Integrated Apps into /System to free up space in /data.
-Edit update-binary (sou you could flash in TWRP now - prevents status 0 errors).
-Remove Setup Guide.
-Remove Youtube.
-Lowered Compression level slightly (People with fast micro SDCards may find this quicker to flash)
-Credits to @Tungstwenty, @sak-venom1997, @M66B and @liudongmiao (Why? - It's a secret :sssh:)
-Xposé (d) Framework, App Settings and XPrivacy added.
-Updated Most Preinstalled Apps.
[STRIKE]-ODEXed ROM (About 10-20mb bigger but will boot quicker and will save /data space - for more apps to be stored).[/STRIKE]
[strike]-Replacing Gallery w/ QuickPic, (not changed name or icon because it would revert after update)[/strike]
[STRIKE]-Currently at 117mb due to cuts in apps.[/STRIKE]
[STRIKE]-Moved Few Apps To /data so they could be removed.[/STRIKE]
[STRIKE][U]Apps[/U]
Removed Most Live Wallpapers
Removed Most Widgets
Removed Radio[/STRIKE]
Why waste all the empty space in /system?
Adding more...
-----------------------------------------------------------------------------------------
Instructions
Instructions For Unlocked Bootloader:
1- Download [Firmware] [GSM] R800i 4.0.2.A.0.58 EnhancedV2.
http://www.mediafire.com/?s93d99wisca54es
1b- Download R800i_4.0.2.A.0.62_PhoenixVendor (If you plan on using Custom Kernel)
https://docs.google.com/open?id=0B3UZttldr317Zm4xRnQ2WkRFbHM
2 - Flash it using Flashtool.
3 - Enter Recovery.
4 - Download Atomic GB 7.1B1 And Flash it with ClockWorkMod (Make sure to wipe cache, data and system).
5 - Reboot and allow cache/dalvik to build up.
5b - If you are using this with Turbo Kernel not in the internal partition the first boot will a long time (Be Patient)
6 - Reboot a second time and Enjoy!
-----------------------------------------------------------------------------------------
Instructions For Locked Bootloader:
1- Download [Firmware] [GSM] R800i 4.0.2.A.0.58 EnhancedV2.
http://www.mediafire.com/?s93d99wisca54es
2 - Flash it using Flashtool.
3 - Root it using Flashtool.
4 - Install X-Parts.
http://forum.xda-developers.com/showthread.php?t=1437840
5 - Enter Recovery.
6 - Download Atomic GB B1 And Flash it with ClockWorkMod. (Make sure to wipe cache, data and system)
7 - Reboot and allow Dalvik/Cache to build up.
8 - Reboot a second time and Enjoy!
-----------------------------------------------------------------------------------------
Downloads
Drive
https://drive.google.com/folderview?id=0B1ETt4ABW8Qza3MzSEd5b2RyNGM&usp=sharing
Mediafire
https://www.mediafire.com/folder/gn5mo4w5ucn7n/Atomic_GB
As it is in early stage please report any bugs abnormalities, give suggestions and thanks.
Mega
Because Mediafire is having speed issues and Google Drive isn't perfect for everybody.
https://mega.co.nz/#!fsoTHZ7S!Fp-vwrqBB41N6g0tIWhYs7-j_UOw2_4ezqWeuBKs1o8
-----------------------------------------------------------------------------------------
Addons
Wait for the future
-----------------------------------------------------------------------------------------
Frequently Asked Questions
1. Where can I get Adobe Flash Player?
Get it from Adobe's flash player repository. Or you can simply go here. http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
2 .Are all zips multi boot-aware?
Yes
(This section will be updated each time someone asks a question that may be important to note)
-----------------------------------------------------------------------------------------
Screenshots
From B2 Preview
-----------------------------------------------------------------------------------------​
Nice ROM, downloading :good:
Edit: Getting Status 0 error...
Psst. Check the changelog, there's more in the queue for next release...
Wow!
I will instant install this ROM when my Xperia will back from RMA!
PauloKP69 said:
Nice ROM, downloading :good:
Edit: Getting Status 0 error...
Click to expand...
Click to collapse
Using TWRP or CWM?
Any prerequisites, recovery logs e.t.c?
Edit :
Could you try replacing your update binary with this one here?, (file goes to Meta-Inf/com/google/android folder of the flashable zip)
@PauloKP69
sewer56lol said:
Using TWRP or CWM?
Any prerequisites, recovery logs e.t.c?
Edit :
Could you try replacing your update binary with this one here?, (file goes to Meta-Inf/com/google/android folder of the flashable zip)
@PauloKP69
Click to expand...
Click to collapse
Its working
Frutak said:
Its working
Click to expand...
Click to collapse
Yeah I thought that would be the case, because original binaries (from ROM) were in the zip and these had issues :/
I have universal binary for next release, I tested it aswell.
For now I'm reinstalling windows.
Sent from my R800i
Yes, now it is working :good:
I might release B2 today if windows decides to install quicker because I'm reinstalling OS.
Edit: if anyone has issues with short battery life then it is useful to say that this Rom Is constantly seeding to dev/urandom.
To stop this you can remove the init.d script which begins with 08, named AggressiveEntropy.
Sent from my R800i
sewer56lol said:
I might release B2 today if windows decides to install quicker because I'm reinstalling OS.
Edit: if anyone has issues with short battery life then it is useful to say that this Rom Is constantly seeding to dev/urandom.
To stop this you can remove the init.d script which begins with 08, named AggressiveEntropy.
Sent from my R800i
Click to expand...
Click to collapse
Actually forget about it, I found a new compression method which maybe could combine with one I'm currently using, I dunno, it will take long to optimize but I might cut another 12-15mb without removing anything again.
Edit : Cancelling it - compression goes well and apps are smaller but RAM usage is quite bad after this.
+ODEXED to save space in /data
Edit 2 : Have to rebuild next update due to many issues I'm having such as no lockscreen and voice recorder FC. (as well as mysterious lag and lack of RAM.)
Test build for Atomic GB 7.1 B2 released (may not have full changes from changelog). Check the folders in downloads.
Market fix is for Extremekernel users (recommended).
Report any abnormalities/bugs please.
Edit : Haven't tested with TWRP yet due that I just fixed an urgent error (had a SU binary error which I posted in Q&A section, fixed by changing updater-binary).
Someone please report with TWRP.
Edit 2 : Seems like no lockscreen - possibly an ODEX issue since I reoptimized apps after ODEXing.
Edit 3 : Fixed all the minor bugs occuring, ROM is probably STABLE now - will upload fixed version soon.
Releasing the next build probably now unless I find any bugs - been lightly tested and should work fine.
Recommended Kernel (Extreme Kernel r3 (480p)
Market fix included if you have problems with Extreme Kernel (it has a small cache size and refuses to download big apps from play store).
Screenshots:
Edit : Updated and Dogefied thread.
Now on updated version I'm getting error Status 6 with CWM
PauloKP69 said:
Now on updated version I'm getting error Status 6 with CWM
Click to expand...
Click to collapse
That's an update-script error.
The thing I did before uploading was changing the update-script, but didn't test it since it was the only thing and the ui-print or simply text you get in recovery was the only difference.
I must've forgot a comma or made a line too long or something of this sort.
I'm gonna check tomorrow after I get back from school but you can just use the old update-script, sorry for that.
I guess I need to wait more, I tend to release before fully testing.
Sent from my R800i
Sorry for the inconvenience. Since I have a version on my phone before I changed the last thing (the updater script) where I changed text I am uploading now.
Mediafire is already uploaded.
Sorry for any problems and Status 6s.
Google drive upload tomorrow
Sent from my R800i
Now it's working good :good:
One small bug - Settings icon looks like LowRes
PauloKP69 said:
Now it's working good :good:
One small bug - Settings icon looks like LowRes
Click to expand...
Click to collapse
Yeah that's intended until I replace it.
I didn't have time to edit my Settings.apk I ported from my old Gin2JB extended.
The case is that all the icons in settings and the actual app icon itself is much smaller than it should be as I took them from a LDPI device back when editing the settings couple of months ago. The launcher simply tries to resize the icon so it would be the correct size for its grid.
I never intended to fix it as what I originally aimed for was a "Like Jellybean" (this is because I didn't know how to amend sizes of buttons/bars in the main screen) experience but @vokal1992 was making his own settings mod (I didn't know about that) and released it in Gin2JellyBean official which was basically going to do exactly for what I intended so I scrapped this app back in that day I was developing it.
But now I brought it back as I wanted to keep a close to stock experience for AtoMic GB to keep it's purpose still there.
This is one of the things I intend to edit next but for now I'll be very busy this week (school, tests, sport e.t.c) so it's something I will only have time to do at the weekend.
I will aim though to finish this upgraded ROM even if I receive my Nexus back at any point of the week.
Sent from my R800i
Remembered AtomicGB 7 as my Fav rom back in the XP Days and wanted it to continue, glad you have continued it, sadly i have no XP to test it on, lol,
Pizza_Dox said:
Remembered AtomicGB 7 as my Fav rom back in the XP Days and wanted it to continue, glad you have continued it, sadly i have no XP to test it on, lol,
Click to expand...
Click to collapse
It's just a "one off update" since original AtoMic GB became quite dated. I'll be returning to my N5 soon but will make sure to finish the rom.
Sent from my R800i
Added mirrors. Google Drive and MEGA.

Categories

Resources