Question Regarding WiFi Calling on AT&T Galay Note... if its possible Or NOT - AT&T Samsung Galaxy Note I717

What the Glob am I talking about?
Alright so due too my ****ty signal at home I am very curious if there is a way we can make a mod too enable us AT&T Galaxy note users to make internet calls without the use of a 3rd party app such as Google voice or GrooVe IP.
So Lets begin, Im aware of how T-mobile users have the feature of making calls through wifi, but recently I ran into a thread that posted that states how to"Add native android SIP stack for Wifi & 3G calls in ICS " Link > http://forum.xda-developers.com/showthread.php?t=1674592.
We know it used to work on the international galaxy note until samsung pulled the feature out when upgrading to ICS. we also know the old method does not work for ICS ROMs. Yet I believe here in xda we can make it happen wether we use some other sort of method to achieve this mod.I was looking around xda forums & other users are saying it has too do with the kernel yet others say you have too mod the framework-res.apk ..im a bit lost.
Here is an article from techsilver.com too back up my post of this thread.
Restore Wi-Fi Calling On The International Galaxy Note Running ICS [How-To]
A new method from XDA Developer’s forum member ‘mrcasmir’ for ICS users restores Wi-Fi calling.
It basically works by modifying theframework-res.apk to allow SIP. This in result allows Wi-Fi calling. In addition to enabling internet calls (Wi-Fi and 3G) the mod has other useful features too; it enables all orientations on your phone which means that your phone’s screen can rotate all around, a rotating lockscreen when in landscape and portrait orientations, your phone screen staying dark when you connect USB/charger as well as tablet like dialogue boxes.
Your device needs to be rooted for this method to work on it. Follow the steps below to be able to use your mobile for internet calls:
Please perform a backup before you begin, just to be on the safe side. TechSliver is not to be blamed for any accidental loss in data or in case your device gets bricked. Proceed at your own risk.
Step 1: Download android.software.sip.voip.zip—> (courtesy of mobilegalaxy).
Step 2: Extract and copy the .xml file to /etc/permissions using ES file explorer, Root Explorer or any other root browsing app. The file can also be pushed via ADB but you must be rooted in order to do any of these.
Step 3: Download the framework-res.zip, then extract the content and copy it to /system/framework. Alternatively you can also push this. This framework-res.apk has been tested on the following ROMs:
LPY
LPF
LP8
LP9
LQ2
Kingdroid 2.0
Use it on any other ROM at your own risk.
Your phone will freeze for a bit and then quickly reboot. If it does not do so, reboot manually after giving it some time to copy the files. Your Galaxy Note should now have internet calling enabled. Enjoy!
If unfortunately something goes wrong whilst you follow these steps or it doesn’t work for you, just push back Stock framework-res.apk or re-flash Non-wipe ICS ROM.
For additional information, head over to XDA Developers Forum.
Click to expand...
Click to collapse
What's my point ?
Well for one I would love too see the day I can make wifi calls using my AT&T Galaxy Note and second It seems too me that some IF not most everyone is a bit thirsty too know if the method used on the international verison of the GNote works on their device/Rom & I myself am guilty of that. On the original thread by mrcasmir i posted my framework-res.apk to see if mrcasmir would reply and test my framework to see if the mod works but nothing has happend yet...
Why dont I try this out my self you say?
We all have a life and beside here on xda we less gifted non developer "noobs" ask alot of questions too those highly ranked, Sometimes we are scared to mess something up or we just dont know where too begin. I respect all developers and non-developers such as my self & I appreciate the OP mrcasmir for taking the time to make the mod availble for the international GNote. But i will not lie I am a little intimidated too edit my framework and screw some ish up but I will take pride and proceed too see if this works on my Rom and my Galaxy Note so stay updated and i will check if it works or not.
If ANYONE or if some recognized developer has any insight on this please shed some light & help us/ME out. Any help or clarification would be useful. Im not sure if its possible but yet nothing should be impossible.
(if that makes any sense) Lol
UPDATE!! THESE ARE INSTRUCTIONS DIRECTLY FROM THE OP FROM THE ORIGINAL FRAMEWORK GIVING YOU WIFI CALLING OPTION ON YOUR GNOTE GIVE THANKS TO HIM AND ME IF YOU WANT xD
Just a little changelog of what the modified framework-res.apk can do
Enables internet call (Wifi & 3G)
Enables all orientations (your phone rotates all round)
Rotating Lockscreen (Landscape + Portrait)
Screen stays off on USB/Charger disconnect
Just download one of the .zip files below extract and copy android.software.sip.voip.xml (its in this folder \system\etc\permissions) file to /etc/permissions using ES file explorer, Root explorer or any root browsing app. You can also push this file via ADB but you must be rooted in order to do any of these. After copy framework-res.apk (its in this folder \system\framework) to /system/framework, you can also push this. Your phone will freeze and quickly reboot, if not reboot manually but give it enough time to copy the files.
You should have internet calling now and all the other extras.
NOTE: Always backup incase something goes wrong, I am not to be held responsible for any bricks.
However, if anything goes wrong, just push back Stock framework-res.apk or if not reflash Non-wipe ICS ROM.
This framework-res.apk is specifically tested on the GNote ICS ROMs listed above, use it in any other ROM at your own risk.
--------------------------EASIER STEP FOR NON-ROOTED ROMS--------------------------
To simplify these steps, I have made a flashable zip. Download one of the .zip files and put it in your sdcard (external)---Do not extract pls.
Boot into recovery (Vol up + Power button + Home button all together)
-------ALREADY HAVE CWM DO THIS-------
Scroll down to 'Install zip from sdcard'
Then 'Select zip from Internal/External sd'
Find the zip where you saved it and select it
Select Yes to install.
NOTE: CWM uses Vol up & down to scroll and Home button to select
----------STOCK RECOVERY DO THIS---------
Download CWM Touch
Copy to External sdcard
Boot into recovery
Scroll down to 'Apply update from external sdcard'
Locate CWM and select it
Select Yes to install
CWM Touch will load automatically
Click 'Install zip from sdcard'
Click 'Select zip from Internal/External sd'
Locate the zip where you saved it scrolling with your finger or with volume button
Click on it and select yes to install.
NOTE: Stock recovery uses volume up & down to scroll and Power button to select while CWM Touch uses hand + Vol up & down for scrolling and Touch and Home button to select.
When all is done, go back and select Reboot system.
If you have any questions post it here.
THERE ARE FOUR DIFFERENT WAYS TO GET THIS DONE
1. Copy using root explorer
2. Push using ADB
3. Install using CWM Touch temporary
4. Install using CWM kernel installed on your phone.
FOR STEP
1. You must have root and root explorer app, just download the file, extract and copy each to their respective directories (refer to the step above).
2. Push the two files using ADB but you need root in order to do this.
3. Install temporary CWM Touch via stock recovery and flash the zip. This does not install CWM in your phone, it disappears as soon as you reboot.
4. Install CWM kernel for your ROM and use it to flash the zip.
if your looking for the download go to the original thread and scroll till you see the downloads.. (sorry i couldnt past them here)
ORIGINAL THREAD http://forum.xda-developers.com/showthread.php?t=1674592
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

there are a few roms that have SIP as one of their main features. I recall one rom-maker even talking about it in his Youtube video. I'd check out the ROMs with youtube videos.
Sorry i don't remember exactly which one it is.

Jamesyboy said:
there are a few roms that have SIP as one of their main features. I recall one rom-maker even talking about it in his Youtube video. I'd check out the ROMs with youtube videos.
Sorry i don't remember exactly which one it is.
Click to expand...
Click to collapse
Don't worry buddy thanks anyways ill look into it. At least you wrote a post ..220+ views later Lmao

This post deserves some actiooon.
Buuuummmmp.
Sent from my awfsum One V using Xda preem.

Please let's make this happen. I feel handicapped coming from a phone with wificalling (g2x)
Sent from my SAMSUNG-SGH-I717 using xda premium

jghidalgo307 said:
Please let's make this happen. I feel handicapped coming from a phone with wificalling (g2x)
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
tranceph0rmer said:
This post deserves some actiooon.
Buuuummmmp.
Sent from my awfsum One V using Xda preem.
Click to expand...
Click to collapse
Alright guys so good news remember that thread I listed above about the framwork mod? Well I spoke to the OP of the thread and I sent him my framework and he managed to incorporate the "wifi calling" option into the phones settings..
do this after you flash the .zip file go to Settings---> Call----> Internet Account Settings. That is what it adds to your phone where you can setup your Internet calling accounts like SIP in order to use them to make calls instead of your mobile network. You still need a SIP provider but you can just google (android SIP client or i think you can configure google voice as well) I personally havent gone any further and gotten an SIP client but i found a forum that tells you how to use google voice > > >
http://androidforums.com/android-ap...voip-calling-using-google-voice-sipdroid.html
Anyways below is the link to the thread I was talking about and all the files are there needed to flash it. You can either flash it in cwm or just do it manually. Good luck!
http://forum.xda-developers.com/showthread.php?t=1674592

nevermind

mejori said:
nevermind
Click to expand...
Click to collapse
What were you gonna say?

download GrooveIP, and make all the wi fi calls you want...works like a charm...
you need a google voice account to use it
easy peasy

SystemErrorOne said:
What were you gonna say?
Click to expand...
Click to collapse
i was about to comment without reading your entire post..rendering my post absolutely useless!!! :laugh:

wase4711 said:
download GrooveIP, and make all the wi fi calls you want...works like a charm...
you need a google voice account to use it
easy peasy
Click to expand...
Click to collapse
wase Sounds good ill look into that and update the thread!
mejori said:
i was about to comment without reading your entire post..rendering my post absolutely useless!!! :laugh:
Click to expand...
Click to collapse
haha mejori well ahora tu sabes (;

Ayoayaoayaoauao!!

tranceph0rmer said:
Ayoayaoayaoauao!!
Click to expand...
Click to collapse
Lol wtf someones happy :laugh:

tranceph0rmer said:
Ayoayaoayaoauao!!
Click to expand...
Click to collapse
'TA MECLAO!!!:laugh:
he must have stubbed his toe!!!

Anybody tried this on CM9
Also is there anyway to do this without google voice??

I looked at the other thread, and the framework-res.apk that he has is about 18.7mb, however the Goldie ICS rom which I'm using has the framework-res apk at 12.6mb, so I'm sure its not compatible with the one on the other thread, has that apk worked for you? If yes which rom are you on right now?
EDIT: nvm, I'm editing the framework-res.apk from my goldie and I'll see if it works, if it does I'll post, and on success I could edit the apk from other roms as well.., lets see.
I just uploaded the goldie modded file,
http://dl.dropbox.com/u/27597907/modded-framework-res.apk
rename to framework-res.apk and put it in \system\framework
do make a backup of your original framework-res.apk
Also add the xml file to the respective directory from the original thread, please note this is for the SGS3 TW Goldie Rom ONLY.

i_max2k2 said:
I looked at the other thread, and the framework-res.apk that he has is about 18.7mb, however the Goldie ICS rom which I'm using has the framework-res apk at 12.6mb, so I'm sure its not compatible with the one on the other thread, has that apk worked for you? If yes which rom are you on right now?
EDIT: nvm, I'm editing the framework-res.apk from my goldie and I'll see if it works, if it does I'll post, and on success I could edit the apk from other roms as well.., lets see.
I just uploaded the goldie modded file,
http://dl.dropbox.com/u/27597907/modded-framework-res.apk
rename to framework-res.apk and put it in \system\framework
do make a backup of your original framework-res.apk
Also add the xml file to the respective directory from the original thread, please note this is for the SGS3 TW Goldie Rom ONLY.
Click to expand...
Click to collapse
Thanks dude. I installed this and I see the options. Now if you don't mind answering me, what else is needed for me to be able to use wifi calling? I've only done this so far what else do I need to download or install?
Sent from my SAMSUNG-SGH-I717 using xda premium

Oh and btw the post above mine also works for unofficial rom. Fjmod6 with phmod
Sent from my SAMSUNG-SGH-I717 using xda premium

jghidalgo307 said:
Thanks dude. I installed this and I see the options. Now if you don't mind answering me, what else is needed for me to be able to use wifi calling? I've only done this so far what else do I need to download or install?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
This mod just allows you so you can setup your Internet calling accounts with SIP in order to use them to make calls instead of your mobile network.
here are a few link i found useful:
http://ifdefined.com/blog/post/How-...ee-calls-over-the-internet-using-Android.aspx
http://www.androidauthority.com/bes...p-calls-wi-fi-calling-internet-calling-87396/
http://www.getonsip.com/instructions/free-sip-clients-for-android
http://www.youtube.com/watch?v=jS50Fld3y8w
I do not know of how to set it up using another client and not google voice but like i said a quick google search will solve your problems. I personally use google voice i dont see why not.
i_max2k2 said:
I looked at the other thread, and the framework-res.apk that he has is about 18.7mb, however the Goldie ICS rom which I'm using has the framework-res apk at 12.6mb, so I'm sure its not compatible with the one on the other thread, has that apk worked for you? If yes which rom are you on right now?
EDIT: nvm, I'm editing the framework-res.apk from my goldie and I'll see if it works, if it does I'll post, and on success I could edit the apk from other roms as well.., lets see.
I just uploaded the goldie modded file,
http://dl.dropbox.com/u/27597907/modded-framework-res.apk
rename to framework-res.apk and put it in \system\framework
do make a backup of your original framework-res.apk
Also add the xml file to the respective directory from the original thread, please note this is for the SGS3 TW Goldie Rom ONLY.
Click to expand...
Click to collapse
Yes I agree, do a nandroid back up and or manual back up of your framework just in case. This is my Modified framework thanks to mrcasmir
..im running Team Perfection ICS UCLE2 Rom
https://hotfile.com/dl/159639386/07d523a/GNote-i717-TEAM-PERFECTION-UCLE2.zip.html
jshinn1 said:
Anybody tried this on CM9
Also is there anyway to do this without google voice??
Click to expand...
Click to collapse
Yes There is..do a quick search on Google and you will find many sites. I will try and do it and post it I just haven't had the time to do some research lately.
jghidalgo307 said:
Oh and btw the post above mine also works for unofficial rom. Fjmod6 with phmod
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Im taking a guess that this mod of the framework will work with many roms but i suggest if you do more than one mod too your framework you keep a back up of original and each and every time you do modify it make sure you edit it properly and always back up every time you do insert a new mod. Get me?

jghidalgo307 said:
Thanks dude. I installed this and I see the options. Now if you don't mind answering me, what else is needed for me to be able to use wifi calling? I've only done this so far what else do I need to download or install?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
jghidalgo307 said:
Oh and btw the post above mine also works for unofficial rom. Fjmod6 with phmod
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I'm glad it works! And if someone has a framework file that is significantly different from the file size of the one I posted, please do not overwrite yours, instead post it here, and I can mod and re-post the file.
I'm also looking at setting this up, I have very poor signal at home too, and this would be useful. :good: Once I have something working, I'll post what I did

Related

[MOD][COG-4][UnNamed] Over-scroll Glow!

Discontinued. The latest versions of all previously supported ROMs have this functionality built in.
This gives you an over-scroll glow when you reach the end of a list.
I really hope you knew that before clicking on this thread.
Example if you don't know what I'm talking about
It's just a modified framework.jar with modified files allowing the over-scroll to work and the correct glow images assigned to it. Theming is very easy, just colorize the over-scroll glow pngs in framework-res.apk. The default is orange.
What I want to do with this thread is sort of have a place where you can find the over-scroll enabling mod for every popular ROM for our phones. If you think I should support a ROM that I currently don't, then please post in the forums because I read every post! Ask to put a ROM on the wishlist. Upload the ROM's framework-res.apk and framework.jar files and I'll work on it when I'm not busy with school.
Currently, the wish list is:
Stock KH7
[Update on 10/15/11] UnNamed v1.0.1 compatible files uploaded. Give them a try. Honorable mention to quarlow
Installation:
BACK UP YOUR OLD FRAMEWORK.JAR
Because I'll just laugh at you if you complain that your phone won't boot up.
>>>ADB:
Code:
Extract the CWM package to get the framework.jar
adb remount
adb shell
su
cd /system/framework/
cp framework.jar framework.jar.backup
exit
exit
adb push framework.jar /system/framework/
adb reboot
>>>ROOT EXPLORER:
Extract the CWM package to get the framework.jar
Okay, now you can theoretically do this, but why would you want to? You'll get lots of crashes and might mess something important up.
Go to: /system/framework/ and rename framework.jar to something else. Go back to where-ever you saved my modified framework.jar and copy it over to /system/framework/ and change the permissions of the new framework.jar to match the old one. I'm pretty sure it's rw-r--r--, but don't quote me on that. + Restart your phone.
Simba501 has a more indepth tutorial on how to install this mod through Root Explorer here
>>>RECOVERY (preferred):
Flash the one specific to the ROM you're running
Whatever method you choose, know that it will take a stupidly long time for your phone to boot-up. Don't worry though, it'll be worth the wait.
Yoderk created some cool themes for the over-scroll glow for Cognition Beta-4 which you can find HERE.
UnNamed 1.0.1 works with 1.0.2 and 1.0.3 as well.
Also, please remember to say THANKS if I helped you!
cwm please!!
<3
diabolicalangle said:
cwm please!!
<3
Click to expand...
Click to collapse
It's there if you REALLY need it. I haven't tested it and to be honest, it's been a very very long time since I made my last CWM compatible file. Maybe it works though, try it out. If not, then use one of the other methods.
Fine work sir! Works well on Cog Beta 4.
yoderk said:
Fine work sir! Works well on Cog Beta 4.
Click to expand...
Click to collapse
That's awesome! Someone test it on stock w/ root, because if it works there, I'll be amazed.
Confirming that the cwm flashable zip works on cog beta 3!
Working fine here. I'm technically on Beta 1, but I've manually added the components I wanted from each Beta update because there were things I didn't want.
I have a suggestion. I don't know why everyone repeats that method for using root explorer. That's a terrible way to do it. I always use root explorer to manually replace my files and have never experienced any issues. Here is the correct way to use root explorer for manually replacing modded files:
1. Navigate to the file that you plan to replace (in this case, system/framework/framework.jar).
2. Copy (not move) the file and paste it somewhere on your SD card (internal or external, doesn't matter - as long as you can locate it in case you need to put it back). Rename the file you just pasted, but very subtly. For example, when renaming framework.jar, I would only throw something in front of the file name, such as "Backup - framework.jar", so I can easily distinguish it from the new file if I put them in the same spot.
3. NANDROID BACKUP!
4. Download/put on your sd card (whatever you do) the new file that you want to replace the old one with.
5. Move the new file to /system (not in a subfolder yet). Here you will change the permissions, which is crucial to avoid FCs and problems. In root explorer, you would long press the file, press permissions, and set them to whatever the old file's permissions are. This may require going to verify what they are before starting this step. In this case, the permissions are RW-R-R, which in root explorer, means that the first two boxes on the first line are checked and only the first box on the next two lines are checked.
6. Ensure that your new file is correctly named to exactly what it is replacing (case actually matters) and that the permissions also match what it is replacing.
7. Move your new file to the folder, root explorer will ask if you want to replace the file. Confirm.
8. Back out of root explorer and immediately reboot.
No force closes, no problems .
Cwm file worked great on cog beta 4. Thnkz!!
Sent from my SAMSUNG-SGH-I777 Cognition
Simba501 said:
Working fine here. I'm technically on Beta 1, but I've manually added the components I wanted from each Beta update because there were things I didn't want.
I have a suggestion. I don't know why everyone repeats that method for using root explorer. That's a terrible way to do it. I always use root explorer to manually replace my files and have never experienced any issues. Here is the correct way to use root explorer for manually replacing modded files:
...
No force closes, no problems .
Click to expand...
Click to collapse
Thanks! I added your tutorial to the OP.
Well if your like me and hate orange! Then here are two framework-res.apk with a blue and green overscroll color. Just rename them to framework-res.apk and overwrite the original file in system/framework.
Do not forget to back up original file! I claim no responsibility to problems.
Very subtle but a very nice touch...kudos...came zip worked great!!!
Sent from my SAMSUNG-SGH-I777 using XDA App
stock with root, i've got nothing. tried root explorer method and cwm
Does this still have the problem of not changing the Contacts or other Samsung apps?
illathanyours said:
stock with root, i've got nothing. tried root explorer method and cwm
Click to expand...
Click to collapse
Alright this may be Cog4 only... if you want, upload your framework.jar and framework-res.apk and I'll mod it for you and let me know if that works.
MikeyMike01 said:
Does this still have the problem of not changing the Contacts or other Samsung apps?
Click to expand...
Click to collapse
Yes. Those need the tw-framework to be modified and I haven't taken a look at those yet since I'm trying out Perception for a couple of days and that already has it coded in? But it isn't a problem per-say, it's just how Samsung decided to code those specific apps and there isn't a way to implement them in 2.3.4 without breaking the slide left to call, slide right to message, feature. 2.3.5 Roms have that built in on Samsung apps.
Problem probably isn't the best word.
Thanks for answering though. I always wanted the overscroll but having mixed bothered me.
Sent from my SGH-i777
shishir95 said:
Alright this may be Cog4 only... if you want, upload your framework.jar and framework-res.apk and I'll mod it for you and let me know if that works.
Well it's not that pressing of an issue, but maybe I'll send it to you later but right now I'm Dealing with insane iPhone customers, makes me want to hang myself... If 2.3.5 is gonna be coming sometime soon I wouldn't care about the wait.
Anyone know about 2.3.5 ota eta?
Sent from illaphone.
Click to expand...
Click to collapse
illathanyours said:
shishir95 said:
Alright this may be Cog4 only... if you want, upload your framework.jar and framework-res.apk and I'll mod it for you and let me know if that works.
Well it's not that pressing of an issue, but maybe I'll send it to you later but right now I'm Dealing with insane iPhone customers, makes me want to hang myself... If 2.3.5 is gonna be coming sometime soon I wouldn't care about the wait.
Anyone know about 2.3.5 ota eta?
Sent from illaphone.
Click to expand...
Click to collapse
There's a leaked 2.3.5 ROM for the i777 but personally I'm using designgear's Perception which is a port of a i9100 ROM and it works perfectly. I'd recommend the latter since leaked ROMs tend to have problems.
Click to expand...
Click to collapse
could you modify the framework.jar for UnNamed v1.0.1 - First ever well documented and open source stock derived rom? It has the extended power menu and if I overwrite the framework.jar using this it will break that extended power menu. Much thanks for getting the overscroll glow!!
Skyler2Dope said:
could you modify the framework.jar for UnNamed v1.0.1 - First ever well documented and open source stock derived rom? It has the extended power menu and if I overwrite the framework.jar using this it will break that extended power menu. Much thanks for getting the overscroll glow!!
Click to expand...
Click to collapse
I'll give it a try if there's enough demand for it.
shishir95 said:
I'll give it a try if there's enough demand for it.
Click to expand...
Click to collapse
+1 here

[In-Call Volume] **FIX** (Finally)

So after using the Samsung Galaxy S II for over a month now I've had one complaint. In-Call Volume using the handset ear piece. It was "OK" in quiet places but anywhere else...way below par.
So, after looking around for several weeks trying to find a fix I finally got help from a well know dev (Entropy512) as well as using system/lib audio files from Designgears ROM 'Perception'.
So...how do you finally get your in-call volume increased?
First and foremost...Always backup whatever you're changing. Better safe than sorry. Just make a copy of your current system/lib folder, rename it something like 'backup_lib' and place on your sd card somewhere.
Option 1
Download this flashable zip, flash it in CWM, Reboot, Enjoy. (This zip includes some audio files from the Perception ROM, if for any reason DesignGears has an issue with this PM me and I will remove the zip. I'm only using the files to help others solve their in-call volume issue)
MAKE A BACKUP BEFORE FLASHING
Download the Flashable Update Here
I have tested this on three different SGSII's and all seems well! This is a NO WIPE flash, I do reccomend clearing your Dalvik Cache and Cache Partition though.
-Reboot into Recovery
-Scroll down to 'Advanced' and select
-Select "clear Dalvik Cache"
-Flash this update
-Reboot your phone and enjoy!
Option 2 (Incase the flash doesn't work or I am asked to remove the the zip file)
1) Download Designgears ROM 'Perception' Found Here
2) Open the zip file of your current ROM (doesn't matter what ROM)
3) Open the system folder and then open the system/lib folder (of your current ROM)
4) Next, Open the same folder in the Perception ROM
5) Copy the files listed below from the Perception ROM and paste them over the files in your ROM:
- lib_Samsung_Acoustic_Module_Llite.so
- lib_Samsung_Resampler.so
- lib_Samsung_Sound_Booster.so
- libaudio.so
- libaudioeffect_jni.so
- libaudioflinger.so
- libaudiohw_op.so
- libaudiohw_sf.so
- libaudiopolicy.so
- liblvvefs.so
- libmediayamaha.so
- libmediayamaha_jni.so
- libmediayamaha_tuning_jni.so
- libmediayamahaservice.so
- libsamsungAcousticeq.so
- libsamsungSoundbooster.so
- libsoundalive.so
- libsoundpool.so
- libSR_AudioIn.so
- libyamahasrc.so
*Only copy/replace the files listed above as they are only audio files. DO NOT COPY/REPLACE all system/lib files... You'll have unwanted consequences and you'll probably kill a puppy.
6) Now go to the Perception ROM and open system\app and find phone.apk. (Save a copy of your current phone.apk...Just in case)
-Copy (Perception's) phone.apk and replace the phone.apk on your current ROM.
7) After you replace the files listed above on your ROM, reflash your ROM and enjoy your increased call volume.
Note: If you don't want to reflash your ROM and risk losing any settings, you should be able to copy the files and replace them with Root Access and a file explorer, then Reboot your device immediately after. I haven't tried this yet so if someone wants to try and leave feedback, please feel free.
EDIT: Copying the files using a root explorer does work but may cause your phone to crash/reboot afterwards. I'd still recommend just re-flashing the ROM to avoid potential issues. Once again, make sure and make a back up so you can revert any changes if something doen't work properly.
I will try uploading a zip file with appropriate files so you can download but currently I do not have Designgears permission. This is their code and I don't want to step on any toes.
EDIT: I have tried reaching out to DG for permission but had no luck, if he asks that I remove the zip file, I will do so.
Known Potential Issues:
- When flashing over a stock/rooted ROM this update may cause the phone application to crash/force close. I have tried this update personally on every ROM I could flash and haven't had any issues. However, I have not tried it on the stock ROM. If you're on stock/rooted, please make a backup so if it does cause issues you can simply revert the changes.
Much thanks goes to Entropy512 for the help with solving this issue and Designgears ROM 'Perception'. Using Perception showed me that increasing the in-call volume was possible! (it's a very stable and awesome ROM as well )
***UPDATE***
Due to some people being a worried about flashing the update I have taken the liberty of making the backup files for you and making them flashable!
- I have made revert files for all of the major ROM's we currently have for our device. I did not include Perception because that ROM is where the audio files originated from. Below is the download links for the backups.
IF my volume fix does NOT work, simply download the backup for your ROM and flash it. It will revert all the changes my fix made.
- Revert_CM7.1_Stable
- Revert_H8s2_1.2.2
- Revert_Serendipity_8.2
- Revert_Stock_UCKH7
- Revert_UnNamed_1.2
- Revert_MIUI 1.11.4 v1
- If you are using Perception ROM you do NOT need the volume fix as this ROM has the files built in
As a side note, I have tried this on several I9100 ROM's as well and had luck with them all.
If this thread helps, please click the thanks button for me, I'm new to the XDA community.
Any I9100 ROM should work here for the libs - however:
Your mic will be screwed up for outgoing audio unless you change the Samsung Noise Reduction settings. (DG forced this in Perception, I believe he did it in an APK somewhere and not in the libs.)
Entropy512 said:
Any I9100 ROM should work here for the libs - however:
Your mic will be screwed up for outgoing audio unless you change the Samsung Noise Reduction settings. (DG forced this in Perception, I believe he did it in an APK somewhere and not in the libs.)
Click to expand...
Click to collapse
I just tried a call and you're correct, the mic isn't working properly. Do I need to find the APK or do you know what changes I need to make? This is a popular issue and I'm hoping this thread can help.
Edit: I found some APK's....any idea which one would deal with the mic?
-CallSetting.apk
-Phone_Util.apk
-Phone.apk
-Settings.apk
Ahahaha, good thing I made a backup before pasting, but pasting the files in root explorer does work, however your phone will crash and reboot, but it is louder.
Doesn't work on the apk :v
penguinlogik said:
Ahahaha, good thing I made a backup before pasting, but pasting the files in root explorer does work, however your phone will crash and reboot, but it is louder.
Click to expand...
Click to collapse
I'm testing different apk's right now. As soon as I figure out which apk the fix is located in I'll edit the post.
Maybe DG can drop a hint to me
Hmm does this enable the AUDIO part of the Samsung Service mode?
penguinlogik said:
Hmm does this enable the AUDIO part of the Samsung Service mode?
Click to expand...
Click to collapse
I haven't tried the audio menu yet, feel free to try if you'd like and let me know. 2 birds 1 stone.
Nope... ATT WHY YOU DISABLE THE MOST IMPORTANT MENU.
penguinlogik said:
Nope... ATT WHY YOU DISABLE THE MOST IMPORTANT MENU.
Click to expand...
Click to collapse
I figured out which apk fixes the mic issue it's the phone.apk. I updated the original post. Sorry for the set back. Let me know if you experience any issues
Just posting another screenshot to show the phone.apk.
penguinlogik said:
Ahahaha, good thing I made a backup before pasting, but pasting the files in root explorer does work, however your phone will crash and reboot, but it is louder.
Doesn't work on the apk :v
Click to expand...
Click to collapse
Try copying the CallSetting.apk as well (use both). If you still don't have any luck with fixing the mic issue and you're using a file manager to make the switch, try re-flashing your ROM with the apk changes instead.
Make a backup before doing it so you can restore all your settings if it doesn't work for some reason.
It works after I replaced it in my ROM zip
Sent from my SAMSUNG-SGH-I777 using xda premium
penguinlogik said:
It works after I replaced it in my ROM zip
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Did you have to re-flash? Just trying to make sure my instructions are correct.
Did you need to add both apk's as well?
No, I just added replaced the files in the Unnamed 1.1.0 full update zip, ran an update via CWM, with only the phone.apk and microphone works.
penguinlogik said:
No, I just added replaced the files in the Unnamed 1.1.0 full update zip, ran an update via CWM, with only the phone.apk and microphone works.
Click to expand...
Click to collapse
Ok, glad it works and the kinks are worked out thanks for you patience and tests.
Thats awesome news. Low mic has always been an issue for me. Just wondering if someone can create a flash able zip that automates everything, if possible.
Great work guys.
daraj said:
Thats awesome news. Low mic has always been an issue for me. Just wondering if someone can create a flash able zip that automates everything, if possible.
Great work guys.
Click to expand...
Click to collapse
IF I can get approval from Designgears to use some sources from his ROM I shouldn't have any issues putting this into a zip file for everyone. I've reached out to DG, just awaiting a response
Great keep us posted please. It will make a big difference to many people
Sent from my SAMSUNG-SGH-I777 using XDA App
crazyagg said:
IF I can get approval from Designgears to use some sources from his ROM I shouldn't have any issues putting this into a zip file for everyone. I've reached out to DG, just awaiting a response
Click to expand...
Click to collapse
Excellent! Been looking for something like this, because I also noticed that the volume was really horrible... Keep us posted on a zip file. Rather be "SAFER" than sorry with doing something that does it automagically for me
Knowing my patience, I'll probably manually do it once I get home from school... lol
SpectraDawn said:
Knowing my patience, I'll probably manually do it once I get home from school... lol
Click to expand...
Click to collapse
LOL! Me too! I all over this!

[SUPPORT THREAD] JT Inverted Productions JB4.2 Aroma + Quickflash

This is the support thread for JT Inverted Productions JB 4.2 Gapps+ mod. If you have questions, ask them here. Do not ask for help in the other thread.
Main thread for downloads:
[APPS]JT Inverted Productions JB 4.2 Gapps+ Aroma & Quickflash
How to flash:
1. Backup your current ROM, if needed
2. Perform a full wipe - format /system, /data, /cache, and /dalvik-cache
3. Flash your ROM
4. Flash the gapps package you want
5. Reboot
6. If you need to restore any data, DO NOT restore data to any inverted apps
How to post a question:
1. Did you perform a full wipe before having this problem?
- Yes. There is no other correct answer to this question. If you answered no, correct that first by backing up your device, then doing a full wipe. This means that you should wipe /system, /data, /cache, and dalvick-cache before you even think about continuing with your report. Do not restore data. If you don't fully wipe, you will not receive help. Doing a full wipe allows you to check to see if the problem is there without any of your modifications.
2. Which file are you having trouble with?
- Please make sure to type or copy/paste out the entire file name.
3. Which device are you using?
- HTC One X/Samsung Galaxy S3/Motorola RAZR
4. Which ROM are you using, and which UI type is it?
- Post a link to the ROM you're using and also mention the type of UI (AOSP/CM10/AOKP). List your kernel as well, if you don't use the ROM's built in kernel.
5. Which recovery version are you using?
- CWM/TWRP/4EXT
6. State your problem with as much detail as possible.
- We aren't standing over your shoulder watching you mess up your phone. Describe in great and excruciating detail what you did to arrive at your problem.
1. I'm going to post my question without doing a search.
Fine, but you'll just get made fun of, or infracted by one of the mods who use this mod. Searching is the first rule of XDA.http://forum.xda-developers.com/announcement.php?f=263
1. Search before posting.
Use one of our search functions before posting, whether you have a question or something new to share, it's very likely someone already asked that question or shared that news.​
2. Do I really have to do a full wipe?
No one is going to stand over your shoulder and make sure you do, but don't expect help if you don't.​
3. Why doesn't the zip file flash properly/Why is the zip file password protected?
Too many people don't bother reading the directions, so the zips are now password protected. The password is located in the OP (post #1) of the main thread. You have to read to find it. It only changes on occasion, so keep using the same password until it stops working, then look for the new one. Make sure to read for the changes when you grab the new password. The flashable zip is always hidden inside the password protected zip.
For more information on the password system, please read this helpful post by KidCarter93.​
4. My recovery freezes, gives me some other weird error, or the gapps package just didn't flash properly and force closes a lot.
You probably don't have enough /system space. You need around 160MB of free /system space for the full package.​
5. Gmail (or some other app) is not inverted after flashing this.
You forgot about FAQ #3. Always do a full wipe. Make sure you don't have duplicate apps in /data/app/ and /system/app/. All AOSP-based ROMs should NOT include Google Apps. Some of them might, so you may need to do some manual house cleaning to get this to work. If your chef includes Google Apps in a CM, AOKP, or AOSP ROM, remind them that Google does not allow this.​
6. People app is not inverted/Phone.apk is missing.
Either restore your backup, or reflash aroma and deselect the people app from the menu. Do not use the inverted people app, as this tells us that it is not working on your device. There is no fix, so don't ask.​
7. MMS.apk is not inverted.
Theme it yourself. Open MMS app, then go to Settings > theme and set it however you like. The included themes from TUN_D will automatically invert them, however.​
8. When using Quick Reply pop up, the message displayed is not always the actual message that I just got. Sometimes it is an older message.
That's an issue with the MMS.apk provided by the CM team. It happens when you do not reply to a message from within the quickreply pop up, but instead bypass it to reply within the app. To get around that, you can disable the pop up, but leave the quickreply option and simply tap the "Quick Reply option from the notification bar. This will trigger the pop up and allow you to reply each time to the correct message.​
9. I have problems with ghost inputs, or the touch screen is buggy, in aroma.
Follow the instructions in this post by Wechy77.​
10. I don't want this boot animation anymore, or it was installed by mistake.
Delete /data/local/bootanimation.zip if it's there, or, if it's not there, extract your original boot animation from your ROM's zip file at /system/media/bootanimation.zip and move it to the same location in your ROM.​
11. Instagram has a problem connecting to Facebook.
Before flashing the inverted Instagram, download the latest Instagram from the market, and log in to give it permission to access your Facebook profile. After that, flash the inverted Instagram, and it will work like normal. An updated version of Instagram is being worked on.​
12. I read this whole FAQ and my issue isn't addressed.
Make a post with the following information, and state your problem clearly and in excruciating detail.
1. Did you perform a full wipe before having this problem?
- Yes. There is no other correct answer to this question. If you answered no, correct that first by backing up your device, then doing a full wipe. This means that you should wipe /system, /data, /cache, and dalvick-cachebefore you even think about continuing with your report. If you don't fully wipe, you will not receive help.
2. Which file are you having trouble with?
- Please make sure to type or copy/paste out the entire file name.
3. Which device are you using?
- HTC One X/Samsung Galaxy S3/Motorola RAZR
4. Which ROM are you using, and which UI type is it?
- Post a link to the ROM you're using and also mention the type of UI (AOSP/CM10/AOKP). List your kernel as well, if you don't use the ROM's built in kernel.
5. Which recovery version are you using?
- CWM/TWRP/4EXT
6. State your problem with as much detail as possible.
- We aren't standing over your shoulder watching you mess up your phone. Describe in great and excruciating detail what you did to arrive at your problem.​
This one is mine too.
hopefully the new thread won't get so cluttered
why is the new gallery named differently?
GTDarthYoda said:
hopefully the new thread won't get so cluttered
why is the new gallery named differently?
Click to expand...
Click to collapse
Is there a pool on how many posts before the first profoundly retarded question surfaces?
How do I make my phone black this looks way cool! I'm a super dark person and white is not my friend. Haha I kid l kid great job here guys!
Sent from my SCH-R530U using Tapatalk 2
Perhaps mine will be the first dumb question...
Here goes nothing - hope this isn't too dumb.
I see that the new download is jusTunbean_aroma.v4.0b.zip and what I downloaded yesterday was jusTunbean_aroma.v4.0.zip. I checked the changelog and didn't see an update. What's the difference between the 11/10 and the 11/11 version?
Thanks in advance. Let me know if this is a dumb question - don't want to flash for nothing, but also don't want to be one of those annoying noobs.
Brandimc said:
Here goes nothing - hope this isn't too dumb.
I see that the new download is jusTunbean_aroma.v4.0b.zip and what I downloaded yesterday was jusTunbean_aroma.v4.0.zip. I checked the changelog and didn't see an update. What's the difference between the 11/10 and the 11/11 version?
Thanks in advance. Let me know if this is a dumb question - don't want to flash for nothing, but also don't want to be one of those annoying noobs.
Click to expand...
Click to collapse
Some sort of bug fix, can't hurt flashing it.
GTDarthYoda said:
hopefully the new thread won't get so cluttered
why is the new gallery named differently?
Click to expand...
Click to collapse
Google changed the name
Mac of York said:
Some sort of bug fix, can't hurt flashing it.
Click to expand...
Click to collapse
Thanks for the help! I think this support thread is a great solution. This way, noobs like me don't get nervous posting. Though, trust me - I always read the OP and FAQ, and try googling before I post. It's amazing how lazy people can be.
Brandimc said:
Here goes nothing - hope this isn't too dumb.
I see that the new download is jusTunbean_aroma.v4.0b.zip and what I downloaded yesterday was jusTunbean_aroma.v4.0.zip. I checked the changelog and didn't see an update. What's the difference between the 11/10 and the 11/11 version?
Thanks in advance. Let me know if this is a dumb question - don't want to flash for nothing, but also don't want to be one of those annoying noobs.
Click to expand...
Click to collapse
As far as I know, gallery and some other 4.2 stuff was removed due to errors. Also, CM file manager was changed. If 4.0 is working without any problems for you, then don't worry about updating to 4.0b. If you have issues, then update.
Aroma 4.0/Gapps 4.2a/b/c working with CM10 4.1.2 (i9000) , or not?
The new (4.2) cam/gallery and keyboard are working fine ... (other sources)
second the password was a goal on the wrong side my opinion, because the spamming goes on ...
thx for advanced
MfG
If someone has trouble with ghost inputs, and doesn't know, what to do, here is my little guidance:
There is a little work with it before you can make it work with touchscreen:
1. download "JusTunBean Aroma 4.x..."
2. download "update-binary" from here
3. copy "aroma-config" from JusTunBean.zip (It is in META-INF/com/google/android folder) Edit with notepad++ add calibrate("0.9718","4","1.0176","-9"); to first line. (This calibrate values are for Xperia ray)
If you use another phone and has trouble with ghost inputs then serach a rom in your phone thread with aroma install and find calibrate values.
It should look like this:
Code:
calibrate("0.9718","4","1.0176","-9");
### LICENSE:
#
(if you are on other phone, search for your calibrate numbers)
4. copy modded "aroma-config" and downloaded "update-binary" into the zip (META-INF/com/google/android folder) and overwrite old ones.
5. copy zip to sd card and go into cwm.
6. choose install zip from sd card, and it works with touchscreen.
Thats it.
p.s.: You must do it with every new release of course.
warhead1978 said:
Aroma 4.0/Gapps 4.2a/b/c working with CM10 4.1.2 (i9000) , or not?
The new (4.2) cam/gallery and keyboard are working fine ... (other sources)
second the password was a goal on the wrong side my opinion, because the spamming goes on ...
thx for advanced
MfG
Click to expand...
Click to collapse
Stop whining about it.
Wechy77 said:
If someone has trouble with ghost inputs, and doesn't know, what to do, here is my little guidance:
There is a little work with it before you can make it work with touchscreen:
1. download "JusTunBean Aroma 4.x..."
2. download "update-binary" from here
3. copy "aroma-config" from JusTunBean.zip (It is in META-INF/com/google/android folder) Edit with notepad++ add calibrate("0.9718","4","1.0176","-9"); to first line. (This calibrate values are for Xperia ray)
If you use another phone and has trouble with ghost inputs then serach a rom in your phone thread with aroma install and find calibrate values.
It should look like this:
Code:
calibrate("0.9718","4","1.0176","-9");
### LICENSE:
#
(if you are on other phone, search for your calibrate numbers)
4. copy modded "aroma-config" and downloaded "update-binary" into the zip (META-INF/com/google/android folder) and overwrite old ones.
5. copy zip to sd card and go into cwm.
6. choose install zip from sd card, and it works with touchscreen.
Thats it.
p.s.: You must do it with every new release of course.
Click to expand...
Click to collapse
Adding this to the FAQ.
cajunflavoredbob said:
Stop whining about it.
Click to expand...
Click to collapse
thx for the answer ...
nice support thread... and the flamming goes on...My third post for JT and the last one ... you musn't reply, I will try it like every time when I install any modifications on my phone ... I hate to read the thread because there is 99,8 % nonsense, I will not do the same ****!
So have fun with your non reading community asking all the time for the same things ... happy days ...I will be a read only user like the last 2 Years ...
MfG
Could someone help me out. I've read the op a hundred times. I'm pretty sure i have the password. I've downloaded Zarchiver but now I'm lost. the directions that are given are once you find the password DL Zarchiver and type the password in that application. I can't DL the aroma zip to my phone in order to use Zarchiver to unzip it. All I get is a bunch of crazy text and the DL kicks me back to the xda post.If you could tell me what I'm doing wrong I'd really appreciate it. This is by far the best invert mod out there. Thanks
Sent from my SCH-I535 using xda premium
bbrannack said:
Could someone help me out. I've read the op a hundred times. I'm pretty sure i have the password. I've downloaded Zarchiver but now I'm lost. the directions that are given are once you find the password DL Zarchiver and type the password in that application. I can't DL the aroma zip to my phone in order to use Zarchiver to unzip it. All I get is a bunch of crazy text and the DL kicks me back to the xda post.If you could tell me what I'm doing wrong I'd really appreciate it. This is by far the best invert mod out there. Thanks
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
You can download in pc, and extract using password with 7zip or winzip or winrar. The Zarchiver is for that users mentioned, who wants download direct to phone. (I don't use Zarchiver, so i don't know, how it works)
bbrannack said:
Could someone help me out. I've read the op a hundred times. I'm pretty sure i have the password. I've downloaded Zarchiver but now I'm lost. the directions that are given are once you find the password DL Zarchiver and type the password in that application. I can't DL the aroma zip to my phone in order to use Zarchiver to unzip it. All I get is a bunch of crazy text and the DL kicks me back to the xda post.If you could tell me what I'm doing wrong I'd really appreciate it. This is by far the best invert mod out there. Thanks
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Try to use Chrome -- it works.
This is a question about the theming:
I suppose this is to TUN, I don't use any of the custom themes, and I am on a Note using CM10:
when I am in Instagram, the words for "more comments" I assume is black on the black theme. I mean that when a person has more than 5-6 comments and you want to click it to see more.
Then the other thing I saw is in Facebook, when writing a message, I couldn't see what words were being typed, was just black on black.
Does anyone else see this?

[PATCH] [ROOT] [DE-ODEX] Working Google Wallet on AT&T S4!

So I managed to get Google Wallet working on the AT&T Galaxy S4 using what has become common place now - using files from Sprint's phone. Since they have an MDL release, our files are actually very similar making this easy to do. Of course, that also means you should be on MDL to use this. It may work on older releases, but I haven't tested that.
Since we don't have a recovery, I've attached a zip containing the files you need in the directories they should go in. If someone wants to write a batch file to install it, feel free - but I'm a Linux user I don't use batch files. You will need to install Xposed framework to use this. You may be able to use a region / device patched Wallet APK directly, but I haven't tested that.
Steps:
0) Root is required. A de-odexed system is required.
1) Install the files from the wallet.zip on to your phone, placing the files from the zip in the same directory layout on your phone. Reboot.
2) Install Xposed framework. Run the App, install the modified app_process and reboot.
3) Install the Google Wallet Xposed mod. Run the Xposed Installer App and enable this from the modules tab. Reboot again.
3) Install Google Wallet from the Play Store (I pushed it from play.google.com but whatever works).
4) Run Google Wallet. It should sit as "Setting up Google Wallet" for a few minutes (mine took 2 or 3 minutes) and you should be able to configure Wallet from there.
5) Optional: Restore the AT&T build.prop if you wish. I haven't noticed any side effects from not doing and I like the "4G" icon.
build.prop changes:
Code:
ro.product.model=SAMSUNG-SGH-I337
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.build.product=jflteatt
This is not for inexperienced users. You assume all risk by attempting the above procedure.
I would highly recommend you make a backup of the Google Wallet app and data using Titanium Backup after setup. If you wipe data down the road, it may be impossible to reset your Secure Element without doing this. You have been warned!
Edit: My initial upload missed feature.xml in the csc folder in the wallet.zip. Re-download if your does not include a csc folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here are some more detailed instructions provided by @_Dennis_ quoted from here. Edited for clarity.
_Dennis_ said:
Sent ti someone in a PM. Hope this helps those who are not able to figure it out:
Follow the following steps at your own risk, neither Romracer nor I will take responsibility for what YOU choose to do to YOUR phone.
Its simple.
Download the three files in this thread.
http://forum.xda-developers.com/showthread.php?p=41404463
Ensure you have deodexed ROM from here:
http://forum.xda-developers.com/showthread.php?p=40909863
1) Install the 2 apk files (XposedInstaller and XposedWalletPatcher).
2) Extract the zip file to a folder called wallet_sgs4_att_tw.
3) Copy each file into the right place following the folder structure in the zip as an example:
Things in
wallet_sgs4_att_tw/system/app
Goes to
/system/app
4) Go to xposed installer app (installed in step 1)
5) Go to modules tab
6) select the module xposed wallet patcher
7) go to framework tab
8) install/update
8.5) Connect with adb. "adb shell", "su", "stop", "rm -rf /data/dalvik-cache/*", "exit", "exit"
9) adb reboot
10) Install and run google wallet
11) donate to romracer not me since he is the one who did all the hard work.
Im putting a copy of this in the thread to to help others if they get stuck.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
Not that you have to but would you be able to post a quick video tutorial? I got Google Wallet working on my note 2 which took some modifications that could have been detrimental so I feel confident doing your method but visuals are always helpful. Thanks for the method too.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
mickeywdw1254 said:
Not that you have to but would you be able to post a quick video tutorial? I got Google Wallet working on my note 2 which took some modifications that could have been detrimental so I feel confident doing your method but visuals are always helpful. Thanks for the method too.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
I don't do videos, but I would be happy to link to one if someone else provided it. I'd also be happy to attach one of those "copy it to your SD card and run run.bat" if someone provided it. I'm just here to provide the groundwork and foundation
romracer said:
I don't do videos, but I would be happy to link to one if someone else provided it. I'd also be happy to attach one of those "copy it to your SD card and run run.bat" if someone provided it. I'm just here to provide the groundwork and foundation
Click to expand...
Click to collapse
So I copied the wallet.zip files on to my system dir. Rebooted my phone and now it's a blank screen with just the blue LED pulsating. I"m sure I did something wrong here, not sure what it was. Still at the 1st step.
Thanks,
t
t00fan said:
So I copied the wallet.zip files on to my system dir. Rebooted my phone and now it's a blank screen with just the blue LED pulsating. I"m sure I did something wrong here, not sure what it was. Still at the 1st step.
Thanks,
t
Click to expand...
Click to collapse
Is your system de-odexed? That's the only thing I can think. Forgot to mention that in the OP. Updated.
romracer said:
Is your system de-odexed? That's the only thing I can think. Forgot to mention that in the OP. Updated.
Click to expand...
Click to collapse
Nop. It was Odexed. Any recourse here or is it Kies restore for me? Serves me right for jumping in with both feet
Thanks,
t
where do we put the zip file and do we ust extract
it since we cant flash it with out a recovery
if my internet ever decides to speed up so i can actually complete the dl of odin I may take the plunge and try this
t00fan said:
Nop. It was Odexed. Any recourse here or is it Kies restore for me? Serves me right for jumping in with both feet
Thanks,
t
Click to expand...
Click to collapse
Sorry, I feel bad for missing that. I'd use Odin to restore if I were you. It will preserve your data, so you will just need to re-root (and re-OTA if you want it).
So if I'm on AT&T there's no way to get this working yet?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Dallenn said:
So if I'm on AT&T there's no way to get this working yet?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I'm on AT&T and it works.
That being said you have to change build.prop modoco's xposed hack to kill the device check did not work.
Not sure why.
Thanks romracer
The only changes in features.xml were in the NFC section yea?
Sent from my SPH-L720 using Tapatalk 2
Dallenn said:
So if I'm on AT&T there's no way to get this working yet?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
It works on AT&T; there's just no recovery to install an easy to use zip for you yet. It has to be done by hand. I'll repack this once an unlocked bootloader is available.
_Dennis_ said:
I'm on AT&T and it works.
That being said you have to change build.prop modoco's xposed hack to kill the device check did not work.
Not sure why.
Thanks romracer
The only changes in features.xml were in the NFC section yea?
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
I attached the Google Wallet Xposed patch I use; it works. You do have to edit build.prop (or use the included one) for initial Wallet setup. This is because this information is used in initial provisioning and there's no way around it (this is required for the SGS3 / Note2 / using with AOSP / etc).
Yes, the only changes to feature.xml was in the NFC section.
romracer said:
It works on AT&T; there's just no recovery to install an easy to use zip for you yet. It has to be done by hand. I'll repack this once an unlocked bootloader is available.
I attached the Google Wallet Xposed patch I use; it works. You do have to edit build.prop (or use the included one) for initial Wallet setup. This is because this information is used in initial provisioning and there's no way around it (this is required for the SGS3 / Note2 / using with AOSP / etc).
Yes, the only changes to feature.xml was in the NFC section.
Click to expand...
Click to collapse
Aye I changed my build.prop back to AT&T, I modded systemui to show AT&T as eupoean for signal icons/ signal bars set to 6 so I did not want to lose that lol.
Thank you for confirmation on the features.xml I use a few mods in there and was easier to copy NFC the each mod.
Hopefully I dont kill my phone like ive been doing messing with /system hacks. I dont want to go through it all again lol.
I thought a deodexed system wasnot available for AT&T users...
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Dallenn said:
I thought a deodexed system wasnot available for AT&T users...
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Look at development section Nottach has a p-rom
Can verify wallet works at McDonald's. Went for lunch to check lol
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
romracer said:
Sorry, I feel bad for missing that. I'd use Odin to restore if I were you. It will preserve your data, so you will just need to re-root (and re-OTA if you want it).
Click to expand...
Click to collapse
no worries bud. up & running again. Would love to try this when there is a de-odexed rom out.
is there a way do get around not being deoxed, and what exactly do we have to deox is there a system file to replace or can we just rename the systemUI.odex file
Sent ti someone in a PM. Hope this helps those who are not able to figure it out:
Follow the following steps at your own risk, neither Romracer nor I will take responsibility for what YOU choose to do to YOUR phone.
Its simple.
Download the three files in this thread.
http://forum.xda-developers.com/showthread.php?p=41404463
Ensure you have deodexed ROM from here:
http://forum.xda-developers.com/showthread.php?p=40909863
1) Install the 2 apk files.
2) Extract the zip file
3) Copy each file into the right place following the folder structure in the zip as an example:
Things in
wallet_sgs4_att_tw/system/app
Goes to
/system/app
4) Go to xposed installer app (installed in step 1)
5) Go to modules tab
6) select the module xposed wallet patcher
7) go to framework tab
8) install/update
9) Reboot
10) Install and run google wallet
11) donate to romracer not me since he is the one who did all the hard work.
Im putting a copy of this in the thread to to help others if they get stuck.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
---------- Post added at 12:05 PM ---------- Previous post was at 12:03 PM ----------
djmouse said:
is there a way do get around not being deoxed, and what exactly do we have to deox is there a system file to replace or can we just rename the systemUI.odex file
Click to expand...
Click to collapse
You MIGHT be able to rename the odex files, but im not sure.
Why stay odexed? You can use Nottach's p-ROM from here
http://forum.xda-developers.com/showthread.php?p=40909863
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
_Dennis_ said:
Sent ti someone in a PM. Hope this helps those who are not able to figure it out:
Follow the following steps at your own risk, neither Romracer nor I will take responsibility for what YOU choose to do to YOUR phone.
Its simple.
Download the three files in this thread.
http://forum.xda-developers.com/showthread.php?p=41404463
Ensure you have deodexed ROM from here:
http://forum.xda-developers.com/showthread.php?p=40909863
1) Install the 2 apk files.
2) Extract the zip file
3) Copy each file into the right place following the folder structure in the zip as an example:
Things in
wallet_sgs4_att_tw/system/app
Goes to
/system/app
4) Go to xposed installer app (installed in step 1)
5) Go to modules tab
6) select the module xposed wallet patcher
7) go to framework tab
8) install/update
9) Reboot
10) Install and run google wallet
11) donate to romracer not me since he is the one who did all the hard work.
Im putting a copy of this in the thread to to help others if they get stuck.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
---------- Post added at 12:05 PM ---------- Previous post was at 12:03 PM ----------
You MIGHT be able to rename the odex files, but im not sure.
Why stay odexed? You can use Nottach's p-ROM from here
http://forum.xda-developers.com/showthread.php?p=40909863
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
not that i wanna stay oxed im just happy with everything thats on my phone right now i dont really want to run a custom rom i dont wanna lose any of the samsung features or anything they actually work very well for me all the gestures people complain there gimicy but they all work perfect for me, but i really need wallet, to be honest ive been flashing roms for a while im not sure what the deox is gonna do exactly,but if theres a way to just make my phone think its oxed just for wallet id rather do that you know what im saying?

[MODS][GUIDE]Custom sounds/Ports/Build prop tweaks(Update)

Ok guys and gals this thread started as custom lock screen on/off sounds but since then i have found in my opinion another cool mod from the s4 forum that is compatible on our devices that i think you may enjoy as well. These are not my mods in anyway i just found,tried and confirmed these working on the Note3. Please give credit where it is due if you use these mods/ports.
.........ALWAYS MAKE YOUR BACKUPS BEFORE MODDING ANYTHING!........
First up is the custom on/off lock screen sounds by a guy over on the Sprint S4 forum by the name of dav3wash so don't forget to hit that thanks button when you get over there.
1)Pick and download any of the Lock/unlock sounds you wish from the link below.
2)Extract the Lock.ogg and unlock.ogg from the zip and place on sd card in a new folder named whatever you wish.
3)With any file explorer with root access Navigate to [System / system / Media / audio / ui]
4)Scoll down til you see Lock.ogg and unlock.ogg
5)Delete or move stock sounds to the folder you made in step (2) (Incase you want to go back to stock).
6)Place custom Lock.ogg/unlock.ogg where the stock ones were shown in step (3)
7)Back out of file explorer and reboot your device.
8)After reboot Navigate to [Settings / device / lock screen / unlock effect / and set to ripple/ink] and your good to go!!!!!
http://forum.xda-developers.com/showthread.php?t=2304198
Hope you enjoy these sounds!!!
If for any reason you would like to go back to stock the link below is the stock lock.ogg/unlock.ogg zip. This zip is non-flashable and must be pushed the same way you pushed the custom sounds. https://www.dropbox.com/sh/iw4u1ak89vl233g/AADXINdF3qBGr65eWPOLNfJ5a?dl=0
Next on the list is the Penguin ROM N7 Animations Port.(Sadly not working on NH7 or Nk4) I think this might be one of the coolest animations I've seen. Ive used this port on the s4 and now here on the Note3. CPA Poke's install method uses TWRP but i used Philz Touch and it worked fine .This ported animation originally came from a developer by the name of Skyfall007(Maker of the Penguin Rom1.1 / 4.2.2) on the Nexus 7 forum found here http://forum.xda-developers.com/showthread.php?p=41820147 and seshmaru found here http://forum.xda-developers.com/showthread.php?p=16420559 for technical reasons i can barely comprehend and was ported over by CPA Poke. You can find him in the s4 forums and probably the Nexus 7 forums .Thank all these guys for their hard work. All the downloads and install/uninstall instruction for this animation port can be found in the link below.
HAPPY MODDING!!!!!! Penguin ROM N7 Animations Port http://forum.xda-developers.com/showthread.php?p=42424224
How can I get the stock sound
Jocutz1987 said:
How can I get the stock sound
Click to expand...
Click to collapse
Thats a good question. You dnt have them saved in your phone?
It's OK I back up my rom be for I did it
Jocutz1987 said:
It's OK I back up my rom be for I did it
Click to expand...
Click to collapse
Posted a link up top .
So I was poking around and came acorss these in my travels. typically these would fall under the themes and apps section but beings they are listed for Note 4 apps I thought I'd post them here incase anyone was interested. Please give albe95 thanks for posting these over at the Galaxy s4 forum. (Note 4 apps.) Enjoy!!! http://forum.xda-developers.com/galaxy-s4/themes-apps/exclusive-note-4-apps-collection-t2882577
Got another mod here for all you guys and gals. Are you sick of that annoying droplet sound that you get everything you touch in app or menu? I know I sure was! So here's an alternative. The it will be a zip file you download THEY ARE NOT FLASHABLE!!!! They must be installed manually.
1)Use any root file manager and navigate to root system/media/audio/ui
2)Pull the TW_Touch.ogg and S_HW_Touch.ogg and save them to a new folder incase you wanna go back to stock sounds
3)Extract the content in the zip file that you downloaded from the link below.
3Copy the extracted files and paste them in there rightful places that you previously pulled your stock sounds from.
4) Back out of your file manager and reboot.
All done!!! Enjoy!
Just so you know the TW_Touch.ogg is for anything on screen that is touched and the S_WH_Touch.ogg is for your (Back) and (Menu)
Im gonna upload a few more options here shortly but for now check out the one I linked. Hope you like.
https://www.dropbox.com/s/eybkqkhce1w0htu/Droplet touch replacement.zip?dl=0
So I was going to upload more touch sounds which I am still going to do. The link below is my current setup which I find the sounds to match perfectly with the screen transitions mod that I'm running which would be the N7 posted above. However I thought I'd just throw this out there.
Assuming your already rooted and have a root file manger. (I use FX root manager)
If you go to root system/system/media/audio/ui theres a list of all the sounds for this device.
Just check out all the sounds available and find one you like for a touch sound.
Long press the sound you wish and a menu should appear.
Copy the sound and store it by press paste somewhere that is easy for you to access.
Now just rename the sound.
TW_Touch.ogg for screen touch and S_HW_Touch.ogg for (Back) and(Menu)
After you've renamed them go back into ui sounds and find the stock sounds I just listed and move them to a file incase you wanna return back to stock.
Now take the sounds you renamed and put them in the stock sounds place.
Back out and reboot. And there you go. (My touch sounds) https://www.androidfilehost.com/?fid=95784891001609348 This is a NON-FLASHABLE zip
And as always have a back up just in case!!! If you've found this useful… Hit that thank you button!!!
Ok guys and gals I got something new for you. Are you a fan of S-finder and Quick Connect in your notification drop down but running a rom that doesn't have this included in the package? Well today is your lucky day my friends. I've tested and confirm working on fre3 rom 2.25b only so if you try with other roms please drop by to list the rom you've got it running on so that others may know. And incase you was wondering (tbltespr) is for the Sprint Note Edge. I was wondering if I would get some edge feature but S-finder and Quick Connect is all that popped up. Ok ok here are the steps to get this little tweak working.
Oh and I AM NOT RESPONSIBLE IF YOU DESTROY YOUR DEVICE SO TRY AT YOUR OWN RISK!!!
1) Have a back up or make a back up from the recovery of your choice of your current set up incase anything goes wrong in the process.
2) This is a build prop tweak so you will need to download a build prop editor from the playstore. I use this one but any will probaby work just as well. "Build Prop Editor"
https://play.google.com/store/apps/details?id=com.joeykrim.buildpropeditor
3)You will need to download and install the Quick Connect apk non-flashable zip from this link here.
https://www.androidfilehost.com/?fid=95897840722645991
Theres 2 apk's in the download zip folder.
4)With your file manager navigate to your download folder find the zip you downloaded and tap to open then copy the 2 apk's then navigate to rooted system/systen/apps and paste the 2 files you copied and back out.
5)Once thats done open up the build prop editor you downloaded from the playstore.
6)Scroll over til you see where you do the editing now scroll down til you see
ro. product.name =hltespr and change it to tbltespr
ro.product.device = hltespr and change it to tbltespr
ro.build.product = hltespr and change it to tbltespr
7)When your done scroll back up and save your edit.
8)Now just reboot your device and profit.
If for any reason you wish to go back you can:
Restore your back up or change the tbltespr back to hltespr and delete the apk's and reboot.
Here's some screenshots if it helps. Hope you liked and happy modding!
Goat1378 said:
Ok guys and gals I got something new for you. Are you a fan of S-finder and Quick Connect in your notification drop down but running a rom that doesn't have this included in the package? Well today is your lucky day my friends. I've ...
Click to expand...
Click to collapse
Hi, may I know what theme you used? Thanks
Sent from my iPad using Tapatalk
This_Guyse said:
Hi, may I know what theme you used? Thanks
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Sure thing!!! Its KromeX 4.4.4
http://forum.xda-developers.com/not...theme-kk-4-4-4-nh7-x-themes-11-27-14-t2955214 enjoy. Its explain really well but if you need any help let me know!
Odin Update Zips
So I came across these Odin updates in my travels and wanted to share incase anyone was interested. I didn't see anything said anywhere really. Hope I'm not reposting something that is already on here.
Odin v3.09.3 https://www.androidfilehost.com/?fid=24052804347763515
Odin v3.10.6 https://www.androidfilehost.com/?fid=24052804347763513
Hope this helps someone!

Categories

Resources