Related
is it possible to reinstall the latest firmware with kies?
I update twice as it advised me to do but since then i seem to be getting problems. phone is heating up badly and whenever it has been turned off and i switch it back on i get an error message saying 'com.android could not be started etc and then it asks me to force close the app.
I want to re run the latest firmware but dont know how to.
ps. i have tried a master reset already and still has the same problem.
advice please
hpsauce37 said:
is it possible to reinstall the latest firmware with kies?
I update twice as it advised me to do but since then i seem to be getting problems. phone is heating up badly and whenever it has been turned off and i switch it back on i get an error message saying 'com.android could not be started etc and then it asks me to force close the app.
I want to re run the latest firmware but dont know how to.
ps. i have tried a master reset already and still has the same problem.
advice please
Click to expand...
Click to collapse
Don't use Kies, use Odin, it's far less temperamental. Just download th XWKE2 firmware from samfirmware.com and flash in the PDA section of Odin
101matt101 said:
Don't use Kies, use Odin, it's far less temperamental. Just download th XWKE2 firmware from samfirmware.com and flash in the PDA section of Odin
Click to expand...
Click to collapse
i have downloaded odin but using the links for latest firmware it says its going to take a day lol!
anyone got anywhere else i can get it from
hpsauce37 said:
i have downloaded odin but using the links for latest firmware it says its going to take a day lol!
anyone got anywhere else i can get it from
Click to expand...
Click to collapse
Wow, that's a hell of a long time, leave it to download overnight? Mine took a while but only because it's a big file and it certainly didn't take a day! I'm sorry I don't know anywhere else to get stock firmware from apart from Samfirmware.com and the god awful Kies...
Its not posted on here by any chance using a different upload service .
jje
I have installed an unsecure kernel in my galaxy s2 (GT I9100G) but since I cannot find the original stock kernel, I wanted to roll back to the stock android version that came with s2 and thus wanted to know how could I re-install the firmware from KIES.
Thanks
Perryb said:
I have installed an unsecure kernel in my galaxy s2 (GT I9100G) but since I cannot find the original stock kernel, I wanted to roll back to the stock android version that came with s2 and thus wanted to know how could I re-install the firmware from KIES.
Thanks
Click to expand...
Click to collapse
You need to reflash stock using ODIN before you can use kies, as Kies doesn't recognise custom kernels.
Ricey
ricey1986 said:
You need to reflash stock using ODIN before you can use kies, as Kies doesn't recognise custom kernels.
Ricey
Click to expand...
Click to collapse
Will reflashing bring back the stock kernel and make the phone unrooted in short make it the way Samsung sold it to me?
Also, I am using Galaxy S2 I9100G build number GINGERBREAD.XWKJ2 and for it only 1 unsecured kernel was available at this thread - http://forum.xda-developers.com/showthread.php?t=1327509
I rooted my phone without any problem but since there's no way to get back the stock kernel, I am afraid that if need be, how am I gonna claim warranty for my device.
Perryb said:
Will reflashing bring back the stock kernel and make the phone unrooted in short make it the way Samsung sold it to me?
Also, I am using Galaxy S2 I9100G build number GINGERBREAD.XWKJ2 and for it only 1 unsecured kernel was available at this thread - http://forum.xda-developers.com/showthread.php?t=1327509
I rooted my phone without any problem but since there's no way to get back the stock kernel, I am afraid that if need be, how am I gonna claim warranty for my device.
Click to expand...
Click to collapse
Yes aslong as you flash the firmware that came with it t will be like as samsung sold it. Have a look at intratech's thread he may just have the kernel if you still have the original firmware on it already.
Ricey
ricey1986 said:
Yes aslong as you flash the firmware that came with it t will be like as samsung sold it. Have a look at intratech's thread he may just have the kernel if you still have the original firmware on it already.
Ricey
Click to expand...
Click to collapse
Yes, I do have the original firmware on it. Didn't have enough guts to play with custom ROM :/
I did check intratech's thread and found stock kernel for XWKJ2 but the thread titles says "Official i9100 Firmwares" whereas my phone shows i9100G. I guess this won't work.
And, when flashing to original firmware, will the kernel's be replaced to the original one's as well?
Thanks for suck quick replies Am just a n00b diving into Android
You can extract the original kernel yourself if you want it http://www.hotfile.com/dl/136857418/c144909/I9100GXWKJ2_I9100GODDKJ2_INU.zip.html
oinkylicious said:
You can extract the original kernel yourself if you want it [Link]
Click to expand...
Click to collapse
Downloaded it. Now what do I do? Flash s2 with this, backup using titanium, root device and then use the stock to get rid of yellow triangle? Am I missing anything?
Thanks for your help
BTW, is there a way to get the latest available firmware in my country/region via KIES so that I can be 100% sure of being in right place
i cant post the link right now but you can google
"How to goback/use Kies update after using ODIN,Rooting or Custom Firmware : Video Guide"
and go the the dialandroid website they have a way to make it like original again
Hi guys,
I got my orange samsung galaxy s2 less than a week. Yesterday after rooting, flashing villianrom, i like an idiot, installed Clearglass 1.6 Theme zip via CWM. After rebooting, the phone has now gone into a boot loop. But since i had a nandroid backup (NOT A ZIP FILE!), i thought i'll simply restore...but i can't! The sdcard won't mount. So then i found THIS THREAD.
After following the instructions, i still can't mount the SD Card, yet it's fine in windows 7.
I also thought i'd try to use the ODIN method to reflash my stock fw, but i can't find the correct kernel version . FYI, i'm from uk and the details of my phone are below:-
MODEL: GT-I9100P
ANDROID VERSION: 2.3.4
BASEBAND VERSION: I9100PBVKI2
KERNEL: [email protected] #2
BUILD NO: GINGERBREAD.BVKI3
PLEASE PLEASE HELP ME! I can't be without my phone
Not sure what you are asking .
Firmware is not kernel whatever your correct firmware is that includes the kernel .
You have a 1900P whatever the P is .
Find the firmware not the kernel here .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Alternative
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Still problems use usb jig to set rom counter to zero .
Return to service centre .
jje
Thanks for your fast reply JJEgan. Could you please tell me which stock fw/rom i need to download as the only one that looks close to mine (KI3) is a poland one and i'm in UK.
wowandroid said:
Thanks for your fast reply JJEgan. Could you please tell me which stock fw/rom i need to download as the only one that looks close to mine (KI3) is a poland one and i'm in UK.
Click to expand...
Click to collapse
No idea what your firmware is as you have fl;ashed it .
Based on OP KI3
Then use KI4 CPW UK firmware is what i would do to get back to a working phone ,
CPW (UK): http://www.multiupload.com/QROGHPRZVK
jje
Many thanks for showing me the correct version. I wasn't too sure as i didn't want to mess up the phone permanently. So i simply follow the ODIN boot loop guide?
The way it looks to me is that CWM/Phone is corrupted as i've tried everything - mount/format/unmount/re-mount sd, but it won't detect.
OH BTW! Can you please clarify something for me. I thought that since my orange stock rom said "KI3", i must always get a "KI3"....have i got that wrong? if so how can a KI4 work on a KI3 and why is it not necessary to stick with KI3?
Hey there wowandroid, the KI* is, in my humble opinion just a revision number, higher could mean better reliability in terms of signal and perhaps even battery drain
Sent from my GT-I9100 using XDA App
thanks AJ. It's just that my i9100 is P model (i9100P) and has NFC capabilities. I've managed to flash the phone back with the ki4 rom, so big thank you to JJEgan. I just thought that because i have a p model, i might end up removing features once i flash with a ki4.
Anyway, now that i've got it working, can i go ahead and use odin to flash villianrom/checkrom back again?
wowandroid said:
Hi guys,
I got my orange samsung galaxy s2 less than a week. Yesterday after rooting, flashing villianrom, i like an idiot, installed Clearglass 1.6 Theme zip via CWM. After rebooting, the phone has now gone into a boot loop. But since i had a nandroid backup (NOT A ZIP FILE!), i thought i'll simply restore...but i can't! The sdcard won't mount. So then i found THIS THREAD.
After following the instructions, i still can't mount the SD Card, yet it's fine in windows 7.
I also thought i'd try to use the ODIN method to reflash my stock fw, but i can't find the correct kernel version . FYI, i'm from uk and the details of my phone are below:-
MODEL: GT-I9100P
ANDROID VERSION: 2.3.4
BASEBAND VERSION: I9100PBVKI2
KERNEL: [email protected] #2
BUILD NO: GINGERBREAD.BVKI3
PLEASE PLEASE HELP ME! I can't be without my phone
Click to expand...
Click to collapse
Should help you http://forum.xda-developers.com/showthread.php?t=1108499
hi checkrom, nice way of upping ur post count, lol. if you hadn't noticed, i have already managed to get the phone working...i now want to know if its safe to reflash villian, since i've lost CWM.
wowandroid said:
hi checkrom, nice way of upping ur post count, lol. if you hadn't noticed, i have already managed to get the phone working...i now want to know if its safe to reflash villian, since i've lost CWM.
Click to expand...
Click to collapse
Ok sure!
Best would be just flash a suitable CF Root
And then u will get CWM after that baam install Villan
(LOL 5 min wate took me so long)
cheers mate. I assume from your nick on forum that you've got checkrom? If so, could you tell me how you get a great looking theme installed after checkrom has been flashed? The last time i tried it, i messed up and none of the kitchen apps themes ever changed the looks (just boring samsung looks)
wowandroid said:
cheers mate. I assume from your nick on forum that you've got checkrom? If so, could you tell me how you get a great looking theme installed after checkrom has been flashed? The last time i tried it, i messed up and none of the kitchen apps themes ever changed the looks (just boring samsung looks)
Click to expand...
Click to collapse
checkrom is compactable with every Theme out there if its built for the latest XWKK5 version which checkrom is on!
So first
1)Install ROM
2)Use there Kitchen Download only any one of the themes, and hit apply and then install (Obviously)
OR
You can Download manually from the Forums any theme or any thing for stock XWKK5
3)After a theme install u will reboot.
4)Then use there Kitchen to flash any mods etc u want
Personally i use this via Kitchen http://forum.xda-developers.com/showthread.php?t=1310527
thanks checkrom. I don't suppose we can chat on skype/msn/yahoo? I just need some help, and could do with instant answers if i get stuck. If you can, pls PM me.
Thank You
wowandroid said:
thanks checkrom. I don't suppose we can chat on skype/msn/yahoo? I just need some help, and could do with instant answers if i get stuck. If you can, pls PM me.
Thank You
Click to expand...
Click to collapse
just post here if u get suck i am available for an hour haha
thanks...the problem is that i'm fixing a DSi for the kids...i'm going to be at least an hour or two.
wowandroid said:
thanks...the problem is that i'm fixing a DSi for the kids...i'm going to be at least an hour or two.
Click to expand...
Click to collapse
Just pm me i will reply asap i gt the pm
thats kool, thanks!
wowandroid said:
thats kool, thanks!
Click to expand...
Click to collapse
My pleasure
hi guys,
i'm about to get started with the update. couple of questions though:-
1. What kernel do you recommend? I need a kernel which gives it the longest battery life if possible.
2. What theme do you recommend? I need a theme which is good eyecandy, but isn't too bloated. Something like this for the villianrom:- http://forum.xda-developers.com/showthread.php?t=1229723
3. Is there a rom posted that has already been customised and tweaked with popular kernels/themes? Saves me messing around.
wowandroid said:
hi guys,
i'm about to get started with the update. couple of questions though:-
3. Is there a rom posted that has already been customised and tweaked with popular kernels/themes? Saves me messing around.
Click to expand...
Click to collapse
Yep look in development section .
jje
Hi all, I have a brand new galaxy SII bought in Belgium. I wanted to root it but something went wrong. I used this guide:
http://galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/
Now I think I know what went wrong, the guide is only for a device already on ICS (i think) which was not the case. Trouble is that I do not know which kernel version was on the device before the flash and now he doesn't boot anymore. I just see the galaxy S2 logo with triangle and that's it.
Can you please help me? I'm sorry, I know I was really not careful enough...
If you can get into download mode, follow the guide here to root your phone & consider yourself lucky.
If you can't get into download or recovery mode, you're probably boned. Try a jig before you send it to a service center or have it JTAG repaired by a 3rd party.
MistahBungle said:
If you can get into download mode, follow the guide here to root your phone & consider yourself lucky.
If you can't get into download or recovery mode, you're probably boned. Try a jig before you send it to a service center or have it JTAG repaired by a 3rd party.
Click to expand...
Click to collapse
Thank you for the very quick answer I can get to the download mode without a problem so I think its repairable. Also thank you for the link, problem is that I do not know which version of the insecure kernel i need since the phone doen't boot anymore and I can't see the about phone page... Any tips on that? Or will it be a trial and error game to see with which kernel the phone boots?
Thank you very much for your help!
OK. Being able to get into download mode is good. Now, finding the kernel that came with the phone...
I probably wouldn't go down the trial & error route, have a look at this thread . Don't worry about the links, what you need to do is find the matching kernel for your carrier & country. Then you can look for the matching insecure kernel in the CFRoot thread I linked you to in the previous post.
Edit to add - Linked to wrong thread in first instance, OP, make sure the link you click on takes you to 'Official I9100 Carrier Branded Firmwares'.
Thank you very much. You really are a great help I will try it tommorow morning when I have a bit more time (I don't want to screw it up again ).
No probs ;-) If you have any dramas, post in this thread again. Important thing is to make sure you find the right kernel in that carrier branded firmware thread in the 2nd post, then in the CFRoot kernel thread find the closest match.
For example, if your original kernel is --KF2, you would try and find a matching CFRoot kernel. If there is a KF2 CFRoot kernel, good. You use that. But, if there wasn't a KF2 CFRoot kernel but there was a KF1 or KF3, you could use either of those. Again, this is just an example but should give you an idea of what to look for.
I just booted succesfully. No data lost, everything just fine I did exactly what you said and it worked like a charm. I cannot thank you enough Just wanted to let you know
Really ? Got the phone rooted & all working well ? Very good No probs, glad it worked out well for you/no data loss & most importantly no borked phone
Yep all working fine now. I even put ressurection ics on it without a single problem very glad you were so helpful!
It was so unfortunate that I'm now in this position, a stuck galaxy s 2 logo with triangle on it.
Earlier today, I rooted an SGS2 of my friend on 2.3.4 using XW_NEE_KI4-42: 2.3.4, CF-Root v4.2, SU 3.0, "insecure" to correspond with the 'KI4' code. After that I flashed it with CM9 and all went well.
Seeing the success, another friend wanted me to do the same to his device. I gladly picked up the phone (which was using an official ICS ROM) and simply rooted it using the same file as above via Odin. That is the part where I did wrong. So this phone won't boot and now I have no idea what the 'code' was. Still, odin mode is accessible.
So, where do I go from here?
Should I make new thread for this? Or is the solution provided here is applicable?
The sgs2 was unbranded aka international version.
Thanks in advance.
Flash a stock rom via Odin. That will give you a 'clean slate'. Search Intratech's firmware thread, if the links don't work search Samfirmware.com for the stock firmware you need.
Alternatively, you can get the latest firmware for the phone model/carrier/country with the PC version of Checkfus (search for it on here/Google). The firmware package you download can be flashed in Odin following the instructions in Intratech's thread.
you were the one who solved OP problems n now here you are again to help me out. Seriously, thanks.. I'll definitely will give it a try soon when i got back n I'll report back.
Thanks man.
ethanmars said:
It was so unfortunate that I'm now in this position, a stuck galaxy s 2 logo with triangle on it.
Earlier today, I rooted an SGS2 of my friend on 2.3.4 using XW_NEE_KI4-42: 2.3.4, CF-Root v4.2, SU 3.0, "insecure" to correspond with the 'KI4' code. After that I flashed it with CM9 and all went well.
Seeing the success, another friend wanted me to do the same to his device. I gladly picked up the phone (which was using an official ICS ROM) and simply rooted it using the same file as above via Odin. That is the part where I did wrong. So this phone won't boot and now I have no idea what the 'code' was. Still, odin mode is accessible.
So, where do I go from here?
Should I make new thread for this? Or is the solution provided here is applicable?
The sgs2 was unbranded aka international version.
Thanks in advance.
Click to expand...
Click to collapse
1. Don't panic!!
Well if your unsure which version it is you may have to try them all
download them here from chainfires post .. i'd probably start at lpq ??
http://forum.xda-developers.com/showpost.php?p=20075898&postcount=8
---------- Post added at 09:38 PM ---------- Previous post was at 09:34 PM ----------
MistahBungle said:
Flash a stock rom via Odin. That will give you a 'clean slate'. Search Intratech's firmware thread, if the links don't work search Samfirmware.com for the stock firmware you need.
Alternatively, you can get the latest firmware for the phone model/carrier/country with the PC version of Checkfus (search for it on here/Google). The firmware package you download can be flashed in Odin following the instructions in Intratech's thread.
Click to expand...
Click to collapse
I seem to be following you around lol not on purpose
I'd wouldn't flash a stock rom "straight off the bat" .. Only I would do that as a last resort!
Flashing the correct kernel will make the phone boot up with NO LOSS of data and all will be back to normal
Flashing a stock ROM will mean you have to start all over again.. (like we do anyway when we flash different custom roms)
So I'm not saying your wrong, just saying try a different kernel first!
Thanks Eudemony, I'll try kernel first. So it seems like there are 2 LPBs and 2 LPQs and all of them about 17 different kernels for ICS. Alright, I'll try LPQ first. But, is it okay to keep on flashing/Odin-ing each and every single of it? Any bad consequences of that? Or side effects? hehe, sounded like i'm trying out new drugs.
ethanmars said:
Thanks Eudemony, I'll try kernel first. So it seems like there are 2 LPBs and 2 LPQs and all of them about 17 different kernels for ICS. Alright, I'll try LPQ first. But, is it okay to keep on flashing/Odin-ing each and every single of it? Any bad consequences of that? Or side effects? hehe, sounded like i'm trying out new drugs.
Click to expand...
Click to collapse
If it is the wrong kernel .. you know the result as you have just done that..
and thats what you are trying to fix
If its the right kernel .. everything should "magically" load back up
ethanmars said:
It was so unfortunate that I'm now in this position, a stuck galaxy s 2 logo with triangle on it.
Earlier today, I rooted an SGS2 of my friend on 2.3.4 using XW_NEE_KI4-42: 2.3.4, CF-Root v4.2, SU 3.0, "insecure" to correspond with the 'KI4' code. After that I flashed it with CM9 and all went well.
Seeing the success, another friend wanted me to do the same to his device. I gladly picked up the phone (which was using an official ICS ROM) and simply rooted it using the same file as above via Odin. That is the part where I did wrong. So this phone won't boot and now I have no idea what the 'code' was. Still, odin mode is accessible.
So, where do I go from here?
Should I make new thread for this? Or is the solution provided here is applicable?
The sgs2 was unbranded aka international version.
Thanks in advance.
Click to expand...
Click to collapse
Seems like you're 'downgrade' your friend's S2... If AP unit then take a look at your friend's S2 box any IMEI or Warranty Card which can identified the phone origin region.. My phone AP unit no problem flashing latest open europe firmware from samfirmware website... Already rooted and no annoying yellow triangle... flash counter zero... thanks triangle away.. In your case once your friend's phone region is identified then download accordingly.. flash the correct firmware via odin... deal with triangle later.. most important ensure your friend's phone working and please avoid softbrick..
IMEI will identify aprox build date and area of release .
Try this checker
http://www.numberingplans.com/?page=analysis&sub=imeinr
jje
Lol.. succeed on the first try.. its LPQ.. phew!! thanks a bunch to both of you for helping me out of this panic attack mode. hehe
ethanmars said:
Lol.. succeed on the first try.. its LPQ.. phew!! thanks a bunch to both of you for helping me out of this panic attack mode. hehe
Click to expand...
Click to collapse
Told ya not to panic!
Not a Problem m8 .. thought it would be LPQ as Malaysia was one of the first countries to get Official ICS and LPQ was the first official one released
Eudemony said:
Told ya not to panic!
Not a Problem m8 .. thought it would be LPQ as Malaysia was one of the first countries to get Official ICS and LPQ was the first official one released
Click to expand...
Click to collapse
Seriously? I didnt know that. Actually, before upgrading his phone (lets call him Z), Y asked me to flash CM9 but then since his phone wasn't yet rooted with 2.3.4 on top, I decided to update using kies to see whats it like to have an official ics (youtube isnt enough, hehe) but to no avail. Kies told me the phones having the latest firmware even though I've updated kies to latest version.. hmmm..
Eudemony said:
Told ya not to panic!
Not a Problem m8 .. thought it would be LPQ as Malaysia was one of the first countries to get Official ICS and LPQ was the first official one released
Click to expand...
Click to collapse
That, yes, that's what I thought too. =)
Stock UK BTU Rom Only no leaked ones or custom Roms
Ok Guys I no there is alot on here at the moment on how to Roll Back to 4.1.2 but that seems to be custom roms (pleas point me in the right direction if wroung)
Now I no a Single file Flash will not work so it needs to be a three file
But Here in the UK as you may or may not no 4.3 was rolled out and well its a mess so we need to help people roll back to stock BTU
Battery drain connection issues and others are the main problems
so we need a way to Help UK BTU users a way Back that works and does not brick there phones
I no the custom Guys Have managed this but that involves rooting and saving the EFS fold
that is all to complicated to get a Normal user to do
I no back in the days of Flashing we used three files and a pit file and re partition the phone
Back in the day we had to do this on the Galaxy S so no worries
we just need to know How and has it worked
So can you Guys Help Here ??????
Northern.dj said:
Stock UK BTU Rom Only no leaked ones or custom Roms
Ok Guys I no there is alot on here at the moment on how to Roll Back to 4.1.2 but that seems to be custom roms (pleas point me in the right direction if wroung)
Now I no a Single file Flash will not work so it needs to be a three file
But Here in the UK as you may or may not no 4.3 was rolled out and well its a mess so we need to help people roll back to stock BTU
Battery drain connection issues and others are the main problems
so we need a way to Help UK BTU users a way Back that works and does not brick there phones
I no the custom Guys Have managed this but that involves rooting and saving the EFS fold
that is all to complicated to get a Normal user to do
I no back in the days of Flashing we used three files and a pit file and re partition the phone
Back in the day we had to do this on the Galaxy S so no worries
we just need to know How and has it worked
So can you Guys Help Here ??????
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/2/?page=3&download=21565
flash this using odin on your pc
tomosh22 said:
http://www.sammobile.com/firmwares/2/?page=3&download=21565
flash this using odin on your pc
Click to expand...
Click to collapse
why would he do that?
he wants to go back to 4.1.2 and u give him a link for 4.3
Raulinho7 said:
why would he do that?
he wants to go back to 4.1.2 and u give him a link for 4.3
Click to expand...
Click to collapse
I agree I don't want 4.3 as its a mess the clue is in the tittle !!!!
Firmware on sammobile Good as it is are single file and its well documented that as this has a partition change to go back you need to do a re partition that can not be done with a single file flash
Northern.dj said:
I agree I don't want 4.3 as its a mess the clue is in the tittle !!!!
Firmware on sammobile Good as it is are single file and its well documented that as this has a partition change to go back you need to do a re partition that can not be done with a single file flash
Click to expand...
Click to collapse
Here is my exp....from 4.3 to 4.1 BTU
i did a manual flash of 4.3 from odin as my s3 is branded and i wanted the 4.3 update ..but then due to all the issue i wanted to go back to 4.1.2 BTU..
so i downloaded the MG4 BTU from sammobile and flashed it using ODIN on top of the 4.3, this of course landed me in a boot loop. I had not backed up my phone so i then re-flashed 4.3 back and that worked fine, i didnt lose any apps etc. So did my back up and the did a full wipe via the custom recovery and flashed MG4 this worked ok....
I dont know why i was in a bootloop after going back to MG4, i guess it was because i needed to wipe data etc before flashing the file?
Anyway this processed worked me...
ive been only flashing Stock rooms from day one...all of them being BTU as my phone is tmob branded and they dont seem to release any updates.
Basic Faqs and Guides its all posted .
If you want to roll back stock but do not want to backup your EFS folder then its your risk .Likewise if you fail to understand EFSv2 etc .
Anyone looking to repartition or mess with PIT on a I9300 is asking for a brick .
JJEgan said:
Basic Faqs and Guides its all posted .
If you want to roll back stock but do not want to backup your EFS folder then its your risk .Likewise if you fail to understand EFSv2 etc .
Anyone looking to repartition or mess with PIT on a I9300 is asking for a brick .
Click to expand...
Click to collapse
Like I said in the original post No firmware from Sammobile will work as the Bootloader has changed hence the boot loop
Samsung has pulled this with no Fix for the users that now have this
They need a way back to 4.1.2 with out rooting involved
Northern.dj said:
Like I said in the original post No firmware from Sammobile will work as the Bootloader has changed hence the boot loop
Samsung has pulled this with no Fix for the users that now have this
They need a way back to 4.1.2 with out rooting involved
Click to expand...
Click to collapse
Contact Samsung .
JJEgan said:
Contact Samsung .
Click to expand...
Click to collapse
:silly: I would of thought XDA would of taken this challenge on i hope some one can come up with a fIx for this
or has XDA given up on doing this
Raulinho7 said:
why would he do that?
he wants to go back to 4.1.2 and u give him a link for 4.3
Click to expand...
Click to collapse
no thats a 4.1.2 rom, i have it as my secondary rom and in settings\about device\ it syas Android Version: 4.1.2
---------- Post added at 10:21 PM ---------- Previous post was at 10:16 PM ----------
No thats a 4.1.2 rom, i have it as my secondary rom and in settings\about device\ it syas Android Version: 4.1.2
EDIT: Hmm, i checked the download page again and it turns out you were right and it does say 4.3. Maybe because of were i live the phone reverted back or something. Sorry for the inconvenience.
Northern.dj said:
Stock UK BTU Rom Only no leaked ones or custom Roms
Ok Guys I no there is alot on here at the moment on how to Roll Back to 4.1.2 but that seems to be custom roms (pleas point me in the right direction if wroung)
Now I no a Single file Flash will not work so it needs to be a three file
But Here in the UK as you may or may not no 4.3 was rolled out and well its a mess so we need to help people roll back to stock BTU
Battery drain connection issues and others are the main problems
so we need a way to Help UK BTU users a way Back that works and does not brick there phones
I no the custom Guys Have managed this but that involves rooting and saving the EFS fold
that is all to complicated to get a Normal user to do
I no back in the days of Flashing we used three files and a pit file and re partition the phone
Back in the day we had to do this on the Galaxy S so no worries
we just need to know How and has it worked
So can you Guys Help Here ??????
Click to expand...
Click to collapse
Man, I am now consider myself a victim to Samsung's trick- JB 4.3 leaked vodafone test files [no matter whether it xxxx.vdi/vdf/btu [thanks to faryaab] they all have same thing- change log/apps etc. too... I tested first two releases on top of my xxemh4. Both turned out during first boot "Deustchland" as primary language and felt something wrong on contrary Ireland/swisscom tags...However I kept on trying and voila...i found both as emulated version. However, i liked battety backup[w.r.t. me], camera, connecting to pc with previews of images and some other features. Then I saw this samsung's latest 4.3 Chinese version with different changelog. I tried flashing it but failed. Then I thought it might be a problem of that emulated ireland/swisscom version of 4.3. Just thought, back to original 4.1.2 may get me flashed this this Chinese 4.3. So thus did data flash/factory reset/ cache wipe etc from stock recovery mode and flashed this 4.1.2... it worked fine[downgrade method]. Then tried to get installed the Chinese 4.3. But failed still. Now, suddenly today I found that my s3 i9300 suffering from two problems with this stable rom 4.1.2 xxemh4 [upgraded through kies from previous another version of 4.1.2 which was kept on my pc for any eventuality]:
1. Bluetooth button does not get turned on
2. Phone shuts down when idle
My next method is to flash with pit, bootloader etc as given inhttp://forum.xda-developers.com/showthread.php?t=2535367
Lemme see whether it helps myself
IT DIDN'T HELP! Though my network is ok, and so thus wi-fi, I just checked *#1234* and says CSC: UNKNOWN!!!
I am now trying to patched CSC with this one from " this as suggested featherknox]
Hi I was trying to flash my i9100 4.1.2 with 4.4.2 folowing
http://www.ibtimes.co.uk/galaxy-s2-...4-4-2-kitkat-via-omnirom-1433850#.UwJLn85A3iX
when flashed the rom restared the handset to flash the Gapps file it got stuck on the starting samsung screen. I attached the screen shot to this post.
I tried to take the battery out for 10 mins & put it back on its still stuck on this screen.
I am able to go to in download mood & its showing on Odin when connected the handset.
PLease kindly someone help me with it.
Regards,
Hash
will leave the battery out for long & see if it works !!!
Try going into recovery and formatting data? Can you get into recovery? If not flash stock with Odin and try again
At least if I can go back to stock ROM which is 4.1.2 at least Please help
Thanks allot for your respond. No I am not able to go into the recovery unfortunately. only can go into download mood
What do you want help with? Flashing with Odin? First go to Sammobile.com and get 4.1.2 firmware from there. I'll give you a link for flashing with Odin if you can't find a good one.
andrewwright said:
What do you want help with? Flashing with Odin? First go to Sammobile.com and get 4.1.2 firmware from there. I'll give you a link for flashing with Odin if you can't find a good one.
Click to expand...
Click to collapse
I looked it shows GT-I9100 United Kingdom (Vodafone) 2014 January 4.1.2 I9100XWMS2 I9100VODLSF it shows kies symbol
mine is unlocked.
andrewwright said:
What do you want help with? Flashing with Odin? First go to Sammobile.com and get 4.1.2 firmware from there. I'll give you a link for flashing with Odin if you can't find a good one.
Click to expand...
Click to collapse
yes want to flash with Odin or any way as long as it works. I am not done these things before
banu_hashem said:
yes want to flash with Odin or any way as long as it works. I am not done these things before
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1671969
This link is for the S3 but flashing with Odin is the same as with the s2. I link you to this as its a good guide but do remember that's it's for the S3 so don't be silly and flash i9300 firmware on you're i9100. Hope you understand if not tell me and i'll delete the link. Read it and understand what you need to do before you flash with Odin.
Reading is easy, fixing is not. :screwy:
andrewwright said:
http://forum.xda-developers.com/showthread.php?t=1671969
This link is for the S3 but flashing with Odin is the same as with the s2. I link you to this as its a good guide but do remember that's it's for the S3 so don't be silly and flash i9300 firmware on you're i9100. Hope you understand if not tell me and i'll delete the link. Read it and understand what you need to do before you flash with Odin.
Reading is easy, fixing is not. :screwy:
Click to expand...
Click to collapse
Thank you I found the firmware for uk. BUt mine is unlocked i9100 but I found the vodafone version on Sammobile.com. Do you have a link for unbranded 4.1.2 firmware? sorry if I am troubling you & thank you for your valuable time
We're did you find the unlocked firmware
andrewwright said:
We're did you find the unlocked firmware
Click to expand...
Click to collapse
I meant my phone is unlocked but on sammobile.com I found this
GT-I9100 United Kingdom (Vodafone) 2014 January 4.1.2 I9100XWMS2 I9100VODLSF kies
at the end was Kies icon
Pick a carrier free one.
But i can't see the option of choosing carrier
X.......e.......u
If you're planning on rooting and installing a custom ROM again you may as well just go with the Vodaphone one then go from there. I do have a copy of the unbranded one (can't remember where from) so it is out there if you really need it, only downloaded it last week.
I rooted using Philz kernel, if you search XDA for that you will find the info on how to do it and it seemed the easiest way to go...
Dom
theunderling said:
X.......e.......u
Click to expand...
Click to collapse
sorry didn't get what you meant.
Its working!!!
i JUST FLASHED THE STOCK ROM & ITS WORKING!!!
banu_hashem said:
i JUST FLASHED THE STOCK ROM & ITS WORKING!!!
Click to expand...
Click to collapse
Congrats :thumbup:
Well my happiness short lived
the phone started but now it keep coming up error message
Unfortunately, the process com.android.phone has stopped.