Need some help here... - Mogul, XV6800 ROM Development

Please forgive me if there are other threads.. But this is an old phone and al ow-activity device...
I bought a Verizon Mogul from ebay. Was working just fine until I decided I wanted to flash a ROM onto it. The ONLY tool I could fine from any tutorial was some titan unlock tool... All it seemed to do was bring me to the bootloader. Well, now I'm stuck in the bootloader and can't get out. I tried this exit bootloader program for Windows, but it doesn't think my phone is actually plugged in (not compatible with Windows 7?)
Other threads have suggested using some kind of .nbh file, but there is no region of the internet of which this mysitcal file exists. What do I do?
And finally... can someone provide the files needed that every tutorial says you need to flash a rom on this phone? They don't seem to exist on the internet either.
I realize this phone is old. But I like it because I can use it without a data plan
Thank you to anyone who helps.

There are some tutorials - I'll look to see what I have later. I haven't used this phone in awhile

Dr. Hax said:
I realize this phone is old. But I like it because I can use it without a data plan
Thank you to anyone who helps.
Click to expand...
Click to collapse
Did you get it figured out there?

Related

New to rooting - Need help

I've been trying to root my HTC Hero for the past 2 days and since I'm COMPLETELY new to all of this, I found no easy method.
After a lot of research, I realized I need to patch my recovery screen so I can load new ROMs (correct me if I'm wrong). I've tried many methods, one where I install Flashrec onto my phone, but that didn't work. I also tried this method I found on android.modaco.com. I can't link outside of this site since I'm new, so I can't show you the method. I can tell you the problems I encountered when trying the two procedures and maybe you can tell me what to do from there.
I also tried the Goldcard method. I think it worked out and my memory card is good to go, but I don't know where to go from there. (Also, how can I test out my memory card to check if it really has the Goldcard?)
Please don't bash me for not knowing anything on this stuff. I'd love to learn about it, but I just don't know where to start.
Help would be very appreciated.
EDIT: Sorry if this is in the wrong section. I searched throughout the entire site and tried to find the most appropriate section for me to put this thread and thought this was the place.
MoeKz said:
I've been trying to root my HTC Hero for the past 2 days and since I'm COMPLETELY new to all of this, I found no easy method.
After a lot of research, I realized I need to patch my recovery screen so I can load new ROMs (correct me if I'm wrong). I've tried many methods, one where I install Flashrec onto my phone, but that didn't work. I also tried this method I found on android.modaco.com. I can't link outside of this site since I'm new, so I can't show you the method. I can tell you the problems I encountered when trying the two procedures and maybe you can tell me what to do from there.
I also tried the Goldcard method. I think it worked out and my memory card is good to go, but I don't know where to go from there. (Also, how can I test out my memory card to check if it really has the Goldcard?)
Please don't bash me for not knowing anything on this stuff. I'd love to learn about it, but I just don't know where to start.
Help would be very appreciated.
EDIT: Sorry if this is in the wrong section. I searched throughout the entire site and tried to find the most appropriate section for me to put this thread and thought this was the place.
Click to expand...
Click to collapse
try searching for the unlockr on google, helped me loads!! if i'm right the flashrec method has changed (throws up a error but still roots), dont count me on that one!!
5 reasons not to root your Android
Hello Moekz, I am more or less in your situation, may I ask you a question? are you usually developing? if yes.. you probably will need a root, if not then probably it's better to keep the device as it is. There are few problems with rooting the phone and if the reason is to update to the 2.1...forget it now! At the moment there is not the perfect ROM on Web, we need to wait until HTC comes out with the official ROM. If you decide to root the phone you have to be sure the bluetooth, wifi are ok and the battery life is good...then is tricky and maybe dangerous for your phone if you don't follow step by step and perfectly the tutorial of Unlocker.com and xda suggestion. Anyway there is a video even on youtube: How to root your Hero with one click..watch it and then decide. I would wait 3-4 weeks. Good luck!
francomur99 said:
Hello Moekz, I am more or less in your situation, may I ask you a question? are you usually developing? if yes.. you probably will need a root, if not then probably it's better to keep the device as it is. There are few problems with rooting the phone and if the reason is to update to the 2.1...forget it now! At the moment there is not the perfect ROM on Web, we need to wait until HTC comes out with the official ROM. If you decide to root the phone you have to be sure the bluetooth, wifi are ok and the battery life is good...then is tricky and maybe dangerous for your phone if you don't follow step by step and perfectly the tutorial of Unlocker.com and xda suggestion. Anyway there is a video even on youtube: How to root your Hero with one click..watch it and then decide. I would wait 3-4 weeks. Good luck!
Click to expand...
Click to collapse
Well, that's just it. I don't want to wait 3-4 weeks for the update. It's been a while since HTC released Android 2.1, and we still don't have it for the Hero.

[Q] Long Story Anyone to make it short???

I bought GT-I9000M, Froyo, 4 days ago, brand new unlocked from store. I had a problem getting GPS to work. Searching for a fix on the web, I got inundated with all kind of info,. Not only on GPS fixes, but on comparing, updating, rooting, flashing, unlocking, APP's and other issues with my Galaxy s. So, after reading quite a bit, I decided to update or flash my phone to the latest (assuming that will solve GPS problem and all other issues). As a newbie to Android software which I was about to temper with, I selected androidadvices.com to guide me. I had read very carefully and I followed instructions meticulously to flash 2.3.4 XXJVP. but it did not work. then the phone did not start and I got the little mobile and pc with triangle in between sign. I still could get to download mode. I tried to repeat the process many times, but got same results. it halted after it started to load bin file. I consulted the so called expert at androidadvices if the I9000M differs from I9000 and if could that be the reason for what happened. HE did replied promptly "YES" and advised to take it to service center. I searched a little more on the web with other language and I found a tip about omitting pit file (using Odin). Tip worked fine and flashed to XXJVP. Please do not congratulate me yet. Now the phone starts showing I9000. I did not only lose M, but it is network locked. Getting back to the so called expert to ask him if it's a good idea to upgrade or rooting (as he described in his instructions) to 2.3.4 XXJVQ to solve the problem. Also I meant to publish what happened on his site to save other newbies from believing what he writes. And his answer was "YES" again. Now I know the trick how to use Odin by omitting pit file, I did flashed to XXJVQ. Unfortunately, the galaxy s still locked. By that time, with no search, I already know that XDA forum from their tens of Youtube videos and links on every galaxy s site for their unlocking techniques. I'm sorry I'm trying to make this story short, but I can't for I won't feel well if someone trying to help asks me "did you do that?". However I tried everything I could, using Generate Unlock and SIM less methods, on XDA to unlock, yet no luck. I logged on a site I do not recall the address and up loaded the nv_data.bin.orig and entered 8 digits twice for unlock and unfreeze. I got back the message "the file is smaller than it should". the file was 4MB. I paid for unlock code from unlock-freedom.com 2 days ago, which promised to send code within 12-24Hrs. Yes the store I bought it from is finally open today. I went there and he plugged it to laptop hooked to USB unlocking device. He tried many time and ending with the message unlocking successful on the unlocking app. Yes you got it, the Galaxy s I9000 previously I9000M still locked. On the bright side.I have Gingerbread 2.3.4 XXJPQ installed and if I dismiss unlocking screen I can log in my email. Any help from a real Expert!!!!! will the unlock code, if I receive it, solve the problem. will I ever have my new phone working again????
theothman said:
I bought GT-I9000M, Froyo, 4 days ago, brand new unlocked from store. I had a problem getting GPS to work. Searching for a fix on the web, I got inundated with all kind of info,. Not only on GPS fixes, but on comparing, updating, rooting, flashing, unlocking, APP's and other issues with my Galaxy s. So, after reading quite a bit, I decided to update or flash my phone to the latest (assuming that will solve GPS problem and all other issues). As a newbie to Android software which I was about to temper with, I selected androidadvices.com to guide me. I had read very carefully and I followed instructions meticulously to flash 2.3.4 XXJVP. but it did not work. then the phone did not start and I got the little mobile and pc with triangle in between sign. I still could get to download mode. I tried to repeat the process many times, but got same results. it halted after it started to load bin file. I consulted the so called expert at androidadvices if the I9000M differs from I9000 and if could that be the reason for what happened. HE did replied promptly "YES" and advised to take it to service center. I searched a little more on the web with other language and I found a tip about omitting pit file (using Odin). Tip worked fine and flashed to XXJVP. Please do not congratulate me yet. Now the phone starts showing I9000. I did not only lose M, but it is network locked. Getting back to the so called expert to ask him if it's a good idea to upgrade or rooting (as he described in his instructions) to 2.3.4 XXJVQ to solve the problem. Also I meant to publish what happened on his site to save other newbies from believing what he writes. And his answer was "YES" again. Now I know the trick how to use Odin by omitting pit file, I did flashed to XXJVQ. Unfortunately, the galaxy s still locked. By that time, with no search, I already know that XDA forum from their tens of Youtube videos and links on every galaxy s site for their unlocking techniques. I'm sorry I'm trying to make this story short, but I can't for I won't feel well if someone trying to help asks me "did you do that?". However I tried everything I could, using Generate Unlock and SIM less methods, on XDA to unlock, yet no luck. I logged on a site I do not recall the address and up loaded the nv_data.bin.orig and entered 8 digits twice for unlock and unfreeze. I got back the message "the file is smaller than it should". the file was 4MB. I paid for unlock code from unlock-freedom.com 2 days ago, which promised to send code within 12-24Hrs. Yes the store I bought it from is finally open today. I went there and he plugged it to laptop hooked to USB unlocking device. He tried many time and ending with the message unlocking successful on the unlocking app. Yes you got it, the Galaxy s I9000 previously I9000M still locked. On the bright side.I have Gingerbread 2.3.4 XXJPQ installed and if I dismiss unlocking screen I can log in my email. Any help from a real Expert!!!!! will the unlock code, if I receive it, solve the problem. will I ever have my new phone working again????
Click to expand...
Click to collapse
Ok that was pretty long and slightly confusing. But I think you lost your unlock yes? Have you tried Helroz's Galaxy S Unlock app from the market?
Thank you for replying, I'll be more than delighted to clear your confusion. The answer I coulld not try Helroz's for it's like some other methods require to gain access to efs folder. I don't have folder named efs. and the only file I found browsing internal sdcard whether through PC or Myfiles icon on mobile was nv_data.bin.org with another file called devicefriendlyname.txt with rest of regular folders like sovx and android. all under: /mnt/sdcard as it shows in the phone.
theothman said:
Thank you for replying, I'll be more than delighted to clear your confusion. The answer I coulld not try Helroz's for it's like some other methods require to gain access to efs folder. I don't have folder named efs. and the only file I found browsing internal sdcard whether through PC or Myfiles icon on mobile was nv_data.bin.org with another file called devicefriendlyname.txt with rest of regular folders like sovx and android. all under: /mnt/sdcard as it shows in the phone.
Click to expand...
Click to collapse
need root explorer to see efs files
could you please through a download link to root explorer
.....................
RE: Helroz
Ok I feel like we have real experts here. I installed Helroz smoothly and run it but I got the following message:
It's possible you have problem with busybox, please install it or fix it.
So, what's next great guy's? I guess I need a root explorer and busybox !!!
theothman said:
Ok I feel like we have real experts here. I installed Helroz smoothly and run it but I got the following message:
It's possible you have problem with busybox, please install it or fix it.
So, what's next great guy's? I guess I need a root explorer and busybox !!!
Click to expand...
Click to collapse
dont know anything about unlocking phones lol
can get busybox from market for free though i think, try that
Dear Kyle51
Thank you
I download the .apk file but I can't open it. what to do next?
theothman said:
Dear Kyle51
Thank you
I download the .apk file but I can't open it. what to do next?
Click to expand...
Click to collapse
should be able to go on to the app and pick what version to install, 1.17 or 1.18 i think show up
i tried changing TW launcher through sgs tools on simply honey but it said i didnt have busybox installed so i installed it and picked the newer version but still said i didnt have it, so dont know if i did something wrong
kyle51 said:
should be able to go on to the app and pick what version to install, 1.17 or 1.18 i think show up
i tried changing TW launcher through sgs tools on simply honey but it said i didnt have busybox installed so i installed it and picked the newer version but still said i didnt have it, so dont know if i did something wrong
Click to expand...
Click to collapse
No Way I think you chould replace your TW launcher with your TV guide and look for the cable guy movie
I have a problem here installed busybox and ran it to get the following;
Root not found!
the su binary was not found on your phone. this application will not work since your phone is not rooted
Then I press OK to get:
Status: looking for Busybox....
Your phone is not rooted
you used root explorer ?? so you must be rooted
i tried restoring app with titanium and it said i wasnt rooted so i rebooted and then it worked
try that and if not then try the super one click root method
Ready to donate and hit many thanks
Yes it's me again. still trying.
can anyone write happy ending to this endless story. but please consider I'm A NOOB not anything less than that. meaning I'm not familiar with most of terms and expressions you are using here.
However, if you are following this annoying story from beginning, I'm facing a dead end again, but i know there is great hope considering the following:
I have decided to start clean so I followed instruction in this thread (NOOB GUIDE: HOW TO ROOT/ODIN/FLASH/RECOVER ** 04/28/11 W/ Videos **).
I did every thing as it should be I believe, but I'm stock half way. Phone now flashed to stock T959UJFD (I'm glad now I can say that since I know what stock means) but shuts down as soon as I plug USB cable???????
I have update.zip file on internal SD not the 2GB external.
Also have the Rom of my choice zip file (Trigger 3.2) on internal SD.
Oh I also have SuperOneClick. And Odin 1.7
tried too many things like flashing without reparation or without reboot. tried also to flash some 2.3 Rom versions. and they do work well as I saw. Only one main problem I can't root the phone (meaning I can't see efs folder to unlock phone) which what I have to do since I locked it while trying to fix GPS, in case you are not following from the start.
I also have a very light nice functional stable Arabic Persian Rom. as a matter of fact, I do not know how, but with this version of Rom the phone was able to receive calls and sms. half locked
Thank you Kyle for trying and I believe I have to hit the thanks button for you
I'd really appreciate any help to end this rather entertaining story.
dont know why it goes off when usb gets plugged in :s
you cant root rooting means you can flash custom roms which you've done ?? so you must be rooted ??
and you dont need odin or super one click on your sd (if thats what you meant)
but trying to fix gps locked it as in only open to 1 network/carrier ?? (whatever it's called where you are)
kyle51 said:
dont know why it goes off when usb gets plugged in :s
you cant root rooting means you can flash custom roms which you've done ?? so you must be rooted ??
and you dont need odin or super one click on your sd (if thats what you meant)
but trying to fix gps locked it as in only open to 1 network/carrier ?? (whatever it's called where you are)
Click to expand...
Click to collapse
Come on man.... You are confusing me more than I do !!!!! I hit your thanks button and I did PM you. thanks for trying to help
I think we are all cornfused..... You might have a little more luck finding help in the I9000 forums, try posting your issue there. Good luck!

[Q] Noobie question

I got an AT&T Galaxy Mega I think its the i527, but I'm using it with MetroPCS. I wanted to flash a custom ROM but I'm totally new to this world. :silly:
Hopefully somebody could help me.
1.- What would happen if I do a factory reset? (would I be able to use it on MetroPCS)
2.- Since MetroPCS and T-Mobile are compatible could I use a ROM like this one?
And by the way, when I plug my cell phone to my laptop it starts to charge but I can't open files its like not recognizing it does anybody know whats up?
btw2: I still have the unlocking code would I be able to use it again?
AlejandroBAAO said:
I got an AT&T Galaxy Mega I think its the i527, but I'm using it with MetroPCS. I wanted to flash a custom ROM but I'm totally new to this world. :silly:
Hopefully somebody could help me.
1.- What would happen if I do a factory reset? (would I be able to use it on MetroPCS)
2.- Since MetroPCS and T-Mobile are compatible could I use a ROM like this one?
And by the way, when I plug my cell phone to my laptop it starts to charge but I can't open files its like not recognizing it does anybody know whats up?
btw2: I still have the unlocking code would I be able to use it again?
Click to expand...
Click to collapse
You may need to install drivers for computer to recognize, but mine does that automatically. If rooted, you may need to re-install.
Factory reset is just going to erase everything.
If it is an ATT model i527, there is no recovery for it yet and I beleive that transends all unlocking.
Do the smart thing for a noobie. Dont flash a darn thing until you educate yourself. Read read read. Google your questions. Put yourself in a situation where you understand what your doing. Dont guess or follow someone else unless you are confident in there level of expertise. Nobody will replace your phone here.
Post all information.
Example......you did not say whether your phone is upgraded to 4.4 or still running 4.2 ?????
1 little detail can mean the biggest difference.
Good luck
As always, I will check back, because I am still learning too.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app

[Q] q)GALAXY LIGHT METRO pcs I BROKE MY Phone

Ok so I got the samsung galaxy light from metro running 4.4.2 and I decided to root my phone got myself rooted but I used some**** that changdd my phone from metro to tmobile and I guess my pho j e is locked now and its on 4.2.2 and im a iphone guy and dont really understandwhat I did but any help with gettjng my phone back would really be awesome
themilkboy08 said:
Ok so I got the samsung galaxy light from metro running 4.4.2 and I decided to root my phone got myself rooted but I used some**** that changdd my phone from metro to tmobile and I guess my pho j e is locked now and its on 4.2.2 and im a iphone guy and dont really understandwhat I did but any help with gettjng my phone back would really be awesome
Click to expand...
Click to collapse
What?
I have a Galaxy Light, and I'm fairly knowledgeable about the device. But I don't understand gibberish. You need to tell us exactly what you did, and try to speak in English without typos.
Ok
Lol sorry, I rooted my phone, well I put twrp on my phone the flashed it with I guess a flash for tmobile and on jellybean instead of kitkat. I tried to flash the radio but dont think it did anything. And now I reboot my phone and its asking for the sim pin
themilkboy08 said:
Lol sorry, I rooted my phone, well I put twrp on my phone the flashed it with I guess a flash for tmobile and on jellybean instead of kitkat. I tried to flash the radio but dont think it did anything. And now I reboot my phone and its asking for the sim pin
Click to expand...
Click to collapse
Which TWRP did you flash? Did you flash T-Mobile firmware? I need to know EXACTLY what you did.
Ok
I used twrp 2.7.0.0-gardaltetmo.tar. The flashed a supers u update -v 1.94.zip, then I wanted to know how to unroot incase I needed to know and used SGH-t399-stock-MJA.ZIP
themilkboy08 said:
I used twrp 2.7.0.0-gardaltetmo.tar. The flashed a supers u update -v 1.94.zip, then I wanted to know how to unroot incase I needed to know and used SGH-t399-stock-MJA.ZIP
Click to expand...
Click to collapse
Don't use T-Mobiles firmware on your MetroPCS phone.
This is what you need to do.
And for the love of all that is good in this world, next time DO A BACKUP before flashing things. You installed TWRP, which gives you the ability to make a complete backup of your system exactly as it is at that point in time. If you had done a back-up before you screwed up your phone, it would have taken you but a few minutes to unscrew it.
I apologize for being harsh, but it seems to me like you really need to read and research a lot more. I always (well, usually...almost bricked my tablet the other day) read everything I can find about something potentially risky before doing it. Let this be a learning experience for you. Read as much as you can, understand what it is you are actually doing rather than just following some guide, and if you don't understand, just ask. I and most of us here would rather you asked a noobish question instead of going blindly ahead and screwing your phone up. Playing around with root and recovery and flashing without understanding it is like thinking you can perform open heart surgery with a meat cleaver because you've seen every episode of ER, Scrubs, and Grey's Anatomy.
thanks
ok thanks alot btw. just now got the files downloaded but im in twrp and the files are on my pc how could i get them to my phone? and i dont have a sd card either
themilkboy08 said:
ok thanks alot btw. just now got the files downloaded but im in twrp and the files are on my pc how could i get them to my phone? and i dont have a sd card either
Click to expand...
Click to collapse
Hm. I didn't think about that. I think you might need to get an SD card. Go on Amazon or eBay and pick one up. An 8GB one can be had for literally a few bucks, but a 64GB class 10 one for $35 is an awesome thing too.
Ok
Ok, and with the back up download how do I get the in twrp. Should I put it in a zip file or leave it how it is
ok im a retard
Planterz said:
Hm. I didn't think about that. I think you might need to get an SD card. Go on Amazon or eBay and pick one up. An 8GB one can be had for literally a few bucks, but a 64GB class 10 one for $35 is an awesome thing too.
Click to expand...
Click to collapse
ok so i cannot figure out how to do this.
i have the sgh-t399n galaxy light- with no os installed, i have twrp on my phone. and i have a backup a sd card. but when i go to restore in twrp the backup isnt there, and ive tried going threw the file options to move it to where is it suposed to go but no such luck. i thought maybe a terminal command would work but i have no clue what command to use. if you could help one more time that would be awesome
You can always use Samsung Kies 3 to flash your phone back to stock. You need your serial number though, and for some reason it is not printed on the back of the device(at least for me). A call to tech support should get that sorted anyway.
Alternatively, you can do this with Odin to a very similar effect. Search Google for something like "T399NUVUANK3 tar" to get the file you need, my personal backup is corrupt so I can't share.
fddm said:
You can always use Samsung Kies 3 to flash your phone back to stock. You need your serial number though, and for some reason it is not printed on the back of the device(at least for me). A call to tech support should get that sorted anyway.
Alternatively, you can do this with Odin to a very similar effect. Search Google for something like "T399NUVUANK3 tar" to get the file you need, my personal backup is corrupt so I can't share.
Click to expand...
Click to collapse
Ugh... I own a t399n and I'm doing some real development on it. . I've made a stock odex and deodexed rooted zip files for the t399n and haven't posted them yet. . If you're in a bad way still hit me up and I'll have you up and running in no time. Fun things coming for metro users. Who says you have to pay for a high end device to have a high end device? He he he....
Do you have a backup I bicked my samsung galaxy light metropcs then I unbricked it by restoring a backup for the samsung galaxy light that I found online. Search fresh backup for samsung galaxy light sgh t399n.
Planterz said:
Which TWRP did you flash? Did you flash T-Mobile firmware? I need to know EXACTLY what you did.
Click to expand...
Click to collapse
You're quite uppity, aren't you? I had no trouble understanding exactly what he did.
reholli said:
You're quite uppity, aren't you? I had no trouble understanding exactly what he did.
Click to expand...
Click to collapse
Are you seriously giving me crap about a post from over a year ago? Nice contribution to the discussion.:good: I have no idea if the OP ever fixed his phone, but at least I tried to help.
Planterz said:
Are you seriously giving me crap about a post from over a year ago? Nice contribution to the discussion.:good: I have no idea if the OP ever fixed his phone, but at least I tried to help.
Click to expand...
Click to collapse
And the age of the post, with respect to your attitude, is relevant how?
reholli said:
And the age of the post, with respect to your attitude, is relevant how?
Click to expand...
Click to collapse
I just love getting an email alert at 4am because someone quoted me to post absolutely nothing of substance.
It's relevant because IT WAS A YEAR AGO! I don't remember why I was so cranky that day. I did apologize to him for it. Did you notice that I also still did my best to help him? Do you have a solution to his problem? Does he even still have this phone, given that it was a year ago? If you want to fixate on my posts, fixate on the hundreds of times I've been thanked for helping others, especially going above and beyond helping people find the perfect device for them. I'm not here to be grumpy, I'm here to help people, and get help when needed. Why are you here? To pester me? Look, I respect my elders, and you're clearly older, but at the same time don't presume to talk down to me. Try reflecting on yourself and your motive in making a useless post, bumping a thread dead for several months (a severe breach of netiquette), purely to insult another member.
Come to think of it, my email alert wasn't because I was quoted (I have that feature turned off). I got the alert because I'm still subscribed to this thread, having done so in case there were new posts that might enable me to help the OP. I suppose I should unsubscribe, giving the fact that nobody has posted anything of use or substance in 7 months or so.

[Q] Brick with bootloader and recovery

Hi
I read most of the threads here before about the internal memory can't be mounted issue, but nothing seems to work for me. I can't even figure out which ruu I should download, bacause i bought my phone used and unlocked. I saw it somewhere in android that it was telus, but I downloaded tons of ruu-s and nothing works.
The issue started like 2 years ago and I tried everything I could find online and now my other phone broke I pulled the amaze out again to try to bring it back to life. I took a photo when the battery died and I believe it was using the internal memory that time.
All the info I can get is what it says in the bootloader because I relocked it.
I tried ADB, Linux, and the RUU way and maybe I do something wrong... thats why I ask for help here
The device is S-On hboot is 1.93.0002 so its ICS
I used it on Wind Mobile (Canada) network, but I believe it came from Bell
Also I have some more info from Image CRC, but thats hexa decimal that doesn't mean me anything
So something must be wrong with the partitions, but there's no way I can reach it and partition it again at the second.
If anyone can help me than please do it.
Also I'm not really a pro in Adb and linux and stuff like that. The adb commands don't seem to work, but the fastboot ones do. adb devices doesn't print any connected devices.
kiskisboki said:
Hi
I read most of the threads
If anyone can help me than please do it.
Click to expand...
Click to collapse
Start here:
http://forum.xda-developers.com/amaze-4g/help/qa-htc-unbricking-project-t2966472
pbergonzi said:
Start here:
http://forum.xda-developers.com/amaze-4g/help/qa-htc-unbricking-project-t2966472
Click to expand...
Click to collapse
Thanks. I read that page before, but didn't see the link to the actual thread, so the whole thing didn't make sense... now it does.
Anyways, I believe I have the Linux live cd that they suggested not to use so I stuck at the brickdetect part. Im trying tho

Categories

Resources