RIP Samsung S2 - Galaxy S II Q&A, Help & Troubleshooting

I screwed up my S2 when testing different ROM:s
Now it is dead ... can't power it on - only download mode works.
I tried to install the original Samsung ROM ... but it didn't work.
Is there a way to kick it alive ?

zkab said:
I screwed up my S2 when testing different ROM:s
Now it is dead ... can't power it on - only download mode works.
I tried to install the original Samsung ROM ... but it didn't work.
Is there a way to kick it alive ?
Click to expand...
Click to collapse
Wipe it and then install rom from odin and after install wipe again

Thanks ... now the sun is starting to shine again.
Just some questions.
1) How do I wipe it out ... there is no option in Odin
2) Which ROM should I take:
CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.tar
Kernel_I9100XWLPG.tar.md5
My S2 was I9100XWLPG befor it died.

It never died!
Learn how to use Odin
Get stock rom from www.sammobile.com
Or use checkfus down loader.

zkab said:
Thanks ... now the sun is starting to shine again.
Just some questions.
1) How do I wipe it out ... there is no option in Odin
2) Which ROM should I take:
CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.tar
Kernel_I9100XWLPG.tar.md5
My S2 was I9100XWLPG befor it died.
Click to expand...
Click to collapse
Never get scared if anything happens to ur s2

the best way to resurrect a s2 is to flash cm9 resurrection edition via odin on heimdall

What do u mean with "cannot install" a new rom ? If it can go to download mode then I bet u can use Odin to flash a new rom
Sent from my GT-I9100 using XDA

randomseasons said:
What do u mean with "cannot install" a new rom ? If it can go to download mode then I bet u can use Odin to flash a new rom
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Somehow he was not able to boot it up , that's why he just got scared .!

zkab said:
Thanks ... now the sun is starting to shine again.
Just some questions.
1) How do I wipe it out ... there is no option in Odin
2) Which ROM should I take:
--------->CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.tar
Kernel_I9100XWLPG.tar.md5<---------------
Click to expand...
Click to collapse
this is not a rom its a kernel thats why you cant boot up after flashing

Thanks guys ... here is what I did:
1) Booted S2 into recovery mode.
2) Chose wipe data / factory reset
3) Auto rebooted
4) Booted into download mode
5) started Odin 1.85 (tried also 3.04, same result)
6) for PDA I took CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.tar which worked fine before I messed up
7) Odin went OK telling me kernel loaded & passed
8) now when I power on I only get Samsung logo and it powers off
So where did I go wrong ?
Should I use Heimdall instead of Odin ?

If i am not wrong you are flashing kernel not the whole rom.Remember till the time download mode is accessible your s2 is alive.Dont panic and mess up more.Just download a stock rom from sammobile and flash using odin.
Sent from my GT-I9100 using Tapatalk 2

zkab said:
Thanks guys ... here is what I did:
1) Booted S2 into recovery mode.
2) Chose wipe data / factory reset
3) Auto rebooted
4) Booted into download mode
5) started Odin 1.85 (tried also 3.04, same result)
6) for PDA I took CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.tar which worked fine before I messed up
7) Odin went OK telling me kernel loaded & passed
8) now when I power on I only get Samsung logo and it powers off
So where did I go wrong ?
Should I use Heimdall instead of Odin ?
Click to expand...
Click to collapse
If you were able to get into recovery just flash a rom. You don't have to go as far as a stock Rom if you don't want to. In download mode flash a recovery with Odin and then boot up into the recovery and flash the rom you want. That's it
Sent from my PG86100 using xda premium

I have a problem to see the difference between a ROM and kernel when it comes to file names.
That's why I flashed the kernel in stead of the ROM ...
In 'sammobile' I can't find a ROM corresponding to I9100 XWLPG.
So where do I find the stock ROM for S2 I9100 XWLPG

zkab said:
Thanks guys ... here is what I did:
1) Booted S2 into recovery mode.
2) Chose wipe data / factory reset
3) Auto rebooted
4) Booted into download mode
5) started Odin 1.85 (tried also 3.04, same result)
6) for PDA I took CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.tar which worked fine before I messed up
7) Odin went OK telling me kernel loaded & passed
8) now when I power on I only get Samsung logo and it powers off
So where did I go wrong ?
Should I use Heimdall instead of Odin ?
Click to expand...
Click to collapse
Your flashing kernel not the rom ..!!
---------- Post added at 11:39 PM ---------- Previous post was at 11:37 PM ----------
Mate should i give you a stable S2 gingerbread rom link ?
---------- Post added at 11:40 PM ---------- Previous post was at 11:39 PM ----------
zkab said:
I have a problem to see the difference between a ROM and kernel when it comes to file names.
That's why I flashed the kernel in stead of the ROM ...
In 'sammobile' I can't find a ROM corresponding to I9100 XWLPG.
So where do I find the stock ROM for S2 I9100 XWLPG
Click to expand...
Click to collapse
Here you go LPG firmware http://www.filefactory.com/file/5x6pex7dhia5/n/I9100XWLPG_I9100XXLPX_I9100NEELP4_NEE.rar

Thanks

Fail xD least its a easy fix
Sent from my GT-I9100 using xda premium

Sh1t happens for an reason, nobody's perfect, but some come pretty close
Good to hear that the proper solution to your problem is being done. I had mine in an boot loop, while testing various roms. It wouldn't go pass the boot animation, just kept loading it over and over again. Then I did an "wipe data" and reinstalled rom and voila, my problem was solved as well

Yup all is not lost until download mode is lost.
Once got scared on kernel panic mode but reflashed and BAM
Sent from my GT-I9100 using XDA

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9100 using XDA

Dude, you should take a look here
http://forum.xda-developers.com/showthread.php?t=1449771
It has everything for you, inclusive if u cannot go on recovery mode PERHAAPS you will have to re-partition if u already tryied everything with flashing new ROMs and kernels and nothing else worked...
Read that thread and you will have your SGS2 back for sure ! All download links are there too =D
Thank me if it help you !

Related

[Q] SAMSUN Galaxy S3 unrootable what so ever

Hello Gentlemen,
Last time I managed to root my device Samsun galaxy S III (GT-I9300) via CF-Root 6.4 and it was successfully rooted,
This was the last time it has been rooted, afterwards, I upgraded and flashed a Jelly Bean 4.1.1 via Odin and found out that Root has GONE !!!
That's okay, but the most amazing problem is, the device does never get rooted no matter how many times I try to root it via the same method mentioned above (CF-Root 6.4),
I though afterwards that this is because CF-Root needs to be updated or something, so I reverted back to ICS 4.0.4 by flashing a stock md5 ROM over.
I tried the CF-Root 6.4 and found out it does not work anymore, please help me gentlemen as I spent the last night trial & error, never succeeded.
I am doing all of this just because I want to flash the HD 14 Android Revolution ROM made by Mike here:
http://forum.xda-developers.com/showthread.php?t=1797334
I hope there was an md5 or tar file (Odin flashable) so that it could be much easier to flash for people who are stuck with this situation.
can you post the exact file name you are trying to use to root
slaphead20 said:
can you post the exact file name you are trying to use to root
Click to expand...
Click to collapse
It is Chainfire CF-Root 6.4 (Latest one)
you many find it here
http://forum.xda-developers.com/showthread.php?t=1695238
Thank you
cfroot is Odin flashable... extract the .tar from the zip you downloaded.
Sent from my GT-I9300 using Tapatalk 2
beaver2233 said:
cfroot is Odin flashable... extract the .tar from the zip you downloaded.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I did extract it and end up with tar file, I flashed it, I know the procedure very well, the point is, the device is not welling to get rooted what so ever.
Engineering Support said:
I did extract it and end up with tar file, I flashed it, I know the procedure very well, the point is, the device is not welling to get rooted what so ever.
Click to expand...
Click to collapse
Can you see the su app? If not try installing it
similar problem
Hi, Im having a similar problem, I was rooted, upgraded to 4.1.1 through kies and it was rooted no more. I rooted it again and no problem. I tried a custom rom and it had an issue with wifi so I went back to stock. Now Ive loaded the stock back on and after wiping/factory reset and clear cache it still says Im running a custom binary, system status is custom also, so trying to root it again so I can reset the flash counter and load my backup but it keeps getting stuck on set up connection on odin and eventually fails.
Ive been at this all afternooon with out much luck, can anyone provide me with some guidance on this?
Hi
I have the same problem
slaphead20 said:
Can you see the su app? If not try installing it
Click to expand...
Click to collapse
I can't see anything like SU or CWM or anything else, besides, I use root checker and it tells me that I am not rooted yet.
Any idea why this is happening?
Also I noticed that upgrading to Jelly Bean changes the SDCard name to Sdcard0
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Mopral said:
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Click to expand...
Click to collapse
I am happy to read this different answer. I will try your recommendations today,
and if it does succeed, I'm gonna fly to the moon
:good:
have you tried flashing a custom kernel which autoroots?
Sent from my GT-I9300 using Tapatalk 2
Must be having a brain dead day today! Totally forgot about the rebooting recovery to trigger installation....my bad! That will fix it
Finally
Mopral said:
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Click to expand...
Click to collapse
I finally got it to flash the .tar file in odin, in odin I unpluged the phone after hitting start ( it was just in SetUpConnection doing nothing ) and when I plugged in straight away it started doing its thing. However it didnt go through and load the SU etc. So I did it over again using the above method and it worked:good:. So thanks to you Mopral!!:laugh:
Engineering Support said:
I am happy to read this different answer. I will try your recommendations today,
and if it does succeed, I'm gonna fly to the moon
:good:
Click to expand...
Click to collapse
You Shiny Star,
You did it, you saved my days and nights
many thanks man
many thanks
Mopral said:
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Click to expand...
Click to collapse
You Shiny Star,
You did it, you saved my days and nights
many thanks man
many thanks
By following the above simple steps, I got what I want and resolved this puzzle which really pissed me off for 3 nights already,
Many thanks XDA
Does not work for me
My stats
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I9300 XELLA How to Root?

Hi fellows,
I read that chainfire has not yet released cf-root for XELLA rom.
and my question is how can i root my device without installing custom rom?
if that's not possible, is there a kernel that i can flash that roots my phone without so much tweaks.
Rooting
Download CF-Root-SGS3-v6.4.zip on your computer and extract the file.
from h**p://download.chainfire.eu/196/CF-Root/SGS3/CF-Root-SGS3-v6.4.zip
Open ODIN
Switch off your phone and enter into download mode.
(To enter into download mode you need to press Volume down button and Home button simultaneously while turning the phone on.)
Hope you have your device’s USB drivers installed on your computer if not install it.
Now open ODIN on your computer and connect your device to computer while your phone is on download mode.
When your device will be connected to your computer, one ID:COM boxes will turn yellow/Blue after some time.
Select the files that you have to flash or install on your device from the extracted files in first download.
Now in ODIN, check for Auto Reboot and F. Reset Time options.and for the Re-partition option, check only if you have selected .PIT file above.
Click start in ODIN and the flashing will begin.
This flashing might take some time.As soon as the installation ends your device will restart.
Unplug your device from computer.
Switch it off again after it turns on completely and boots to home screen.
Now you need to enter into recovery mode,to enter into recovery switch on the phone while pressing Volume up,Home and Power buttons together.
Navigate with volume buttons to and select wipe data/factory reset from the recovery menu.
Select reboot system now and wait for device to boot again.
You are done, you rooted your Samsung Galaxy S3 I9300 to 4.1.2 Jelly Bean I9300XXELLA Final Firmware.
dimi22 said:
Hi fellows,
I read that chainfire has not yet released cf-root for XELLA rom.
and my question is how can i root my device without installing custom rom?
if that's not possible, is there a kernel that i can flash that roots my phone without so much tweaks.
Click to expand...
Click to collapse
i rooted stock xxellc yesterday using chainfire. no probs.
use google or the above helpful post for method.
Is XELLA the latest firmware or is it just an OTA?
ToonTonic said:
Is XELLA the latest firmware or is it just an OTA?
Click to expand...
Click to collapse
Firmware
Questions go in the QA section, not general
arinrizk said:
Download CF-Root-SGS3-v6.4.zip on your computer and extract the file.
from h**p://download.chainfire.eu/196/CF-Root/SGS3/CF-Root-SGS3-v6.4.zip
Open ODIN
Switch off your phone and enter into download mode.
(To enter into download mode you need to press Volume down button and Home button simultaneously while turning the phone on.)
Hope you have your device’s USB drivers installed on your computer if not install it.
Now open ODIN on your computer and connect your device to computer while your phone is on download mode.
When your device will be connected to your computer, one ID:COM boxes will turn yellow/Blue after some time.
Select the files that you have to flash or install on your device from the extracted files in first download.
Now in ODIN, check for Auto Reboot and F. Reset Time options.and for the Re-partition option, check only if you have selected .PIT file above.
Click start in ODIN and the flashing will begin.
This flashing might take some time.As soon as the installation ends your device will restart.
Unplug your device from computer.
Switch it off again after it turns on completely and boots to home screen.
Now you need to enter into recovery mode,to enter into recovery switch on the phone while pressing Volume up,Home and Power buttons together.
Navigate with volume buttons to and select wipe data/factory reset from the recovery menu.
Select reboot system now and wait for device to boot again.
You are done, you rooted your Samsung Galaxy S3 I9300 to 4.1.2 Jelly Bean I9300XXELLA Final Firmware.
Click to expand...
Click to collapse
I think this method will flash the kernel and the sudden death fix will not stay is that true? and are there risks because of the locked bootloader.
Read a topic where someone bricked his phone because he flashed another stock firmware on xella update.
dimi22 said:
Read a topic where someone bricked his phone because he flashed another stock firmware on xella update.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dimi22 said:
I think this method will flash the kernel and the sudden death fix will not stay is that true? and are there risks because of the locked bootloader.
Read a topic where someone bricked his phone because he flashed another stock firmware on xella update.
Click to expand...
Click to collapse
Why are people referring to the ELLA bootloader as locked? It's not locked because you can root/flash to your heart's content, the only difference is a custom kernel or recovery will set the flash counter back to 1 after TA, simple to get round. Flash a stock kernel, run TA, flash stock rom (without entering recovery), wipe data in stock recovery. How is that so hard for people to get round?
Oke guys,,,, my point is i always thought that flashing CF ROOT is flashing kernel!!
SO if i flash latest CF ROOT my safe XELLA kernel is gone..... is that not right ???
dimi22 said:
Oke guys,,,, my point is i always thought that flashing CF ROOT is flashing kernel!!
SO if i flash latest CF ROOT my safe XELLA kernel is gone..... is that not right ???
Click to expand...
Click to collapse
Yes thats right so there is no way to root XELLA with keeping STOCK kernel and STOCK recovery for safety of SDS.
I used CF-auto root which worked like a charm!
robertreyez said:
I used CF-auto root which worked like a charm!
Click to expand...
Click to collapse
and do you have the same kernel i think CF root flashed an older kernel??
dimi22 said:
Oke guys,,,, my point is i always thought that flashing CF ROOT is flashing kernel!!
SO if i flash latest CF ROOT my safe XELLA kernel is gone..... is that not right ???
Click to expand...
Click to collapse
to be safe or not , I myself 100% sure that XELLA don't contain the fix . why ?! I installed the XELLA and my device died two days ago.
as long as Samsung didn't announce that "a certain rom" got the fix , No one is safe.
I communicated with STOMAX please find his posts " specially the Post where he introduced his custom ROM Stomax v13"
final words (My opinion)
Samsung didn't officially announce the fix (even the bug) == No one is safe.
Good Luck
Flashing cf root does not flash a kernel. If you flash cf root then flash one of the protected recoveries, you should be fine on XXELLA
slaphead20 said:
Flashing cf root does not flash a kernel. If you flash cf root then flash one of the protected recoveries, you should be fine on XXELLA
Click to expand...
Click to collapse
oke and how do i flash the xella recovery then?
If you are flashing via Odin you will have stock recovery, if you then want a custom/protected recovery flash with mobile Odin/cwm depending on format it comes in

[Q] [HELP] i9300 stuck on Galaxy S3 Logo

Hi friends I need help!!.
My Galaxy SIII i9300 stuck on initial Logo.
***Since march 19 was the last time that I install the FoxHound Custom ROM But NEVER has fault, Today when an incoming SMS to the smartphone it restarts and stuck on initial logo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can enter on recovery mode but I think that I have a problem here, because in the recovery says that:
And when I try to do anything in the recovery the smartphone restarts automatically and don´t do anything, and when I can install another custom ROM from ext-SDcard all goes good, but when I restart it stuck on initial logo again.
I flash with Odin
(Odin3 v1.85 y Odin3 v3.04)
2 officials firmwares from "samfirmware.com"
and also the: CF-Auto-Root-m0-m0xx-gti9300.tar
and the CF-SGS3-CWM-v5.5-v1.5
and the CF-Root-SGS3-v6.4
and none of it worked, all give me the same error.
The kies doesn´t detects it....
(I close all the kies process when I use odin....)
Any suggestion?
Obviously it lost the warranty because the flash counter says 2 and I can not delete it because it does not start :S
Other info:
Last ROM: Foxhound 2.4
Kernel: Siyah
Recovery: Siyah
julio_ton said:
Hi friends I need help!!.
My Galaxy SIII i9300 stuck on initial Logo.
***Since march 19 was the last time that I install the FoxHound Custom ROM But NEVER has fault, Today when an incoming SMS to the smartphone it restarts and stuck on initial logo.
I can enter on recovery mode but I think that I have a problem here, because in the recovery says that:
And when I try to do anything in the recovery the smartphone restarts automatically and don´t do anything, and when I can install another custom ROM from ext-SDcard all goes good, but when I restart it stuck on initial logo again.
I flash with Odin
(Odin3 v1.85 y Odin3 v3.04)
2 officials firmwares from "samfirmware.com"
and also the: CF-Auto-Root-m0-m0xx-gti9300.tar
and the CF-SGS3-CWM-v5.5-v1.5
and the CF-Root-SGS3-v6.4
and none of it worked, all give me the same error.
The kies doesn´t detects it....
(I close all the kies process when I use odin....)
Any suggestion?
Obviously it lost the warranty because the flash counter says 2 and I can not delete it because it does not start :S
Other info:
Last ROM: Foxhound 2.4
Kernel: Siyah
Recovery: Siyah
Click to expand...
Click to collapse
go get a jig or search here how to make one by yourself. it will reset the counter from 2 to 0. after that just go to service center and give your device.
hit thanks if I helped.
amit34521 said:
go get a jig or search here how to make one by yourself. it will reset the counter from 2 to 0. after that just go to service center and give your device.
hit thanks if I helped.
Click to expand...
Click to collapse
Some people says that USB JIG on SGS3 does not remove the rom count only access download mode. I search on google
julio_ton said:
Some people says that USB JIG on SGS3 does not remove the rom count only access download mode. I search on google
Click to expand...
Click to collapse
cant say coz worked for my frnd. he made that one. or try to use any other odin package from here or from live.samsung-updates.com and use. well dont give up hope coz i know about read that jig doesnt work on sgs3 but i saw so u can try it too. your phone is worth it.
hit thanks if I helped.
Download the pills recovery file from pills thread pace it on ur extsd card and then install via he recovery u r booting into
Then finally once pills recovery installation finishes go to Phills recovery and change ur kernel
please use a normal font.
usb jig has no effect on the counter on this phone
SDS
Sorry to say it buddy but your phone has died from SDS
The only way to fix it is to replace the motherboard..
pricey2009 said:
Sorry to say it buddy but your phone has died from SDS
The only way to fix it is to replace the motherboard..
Click to expand...
Click to collapse
Really!!!! no way
How can I make to never turn-on it again??
invinciblecc said:
Download the pills recovery file from pills thread pace it on ur extsd card and then install via he recovery u r booting into
Then finally once pills recovery installation finishes go to Phills recovery and change ur kernel
Click to expand...
Click to collapse
Doesn´t work
Glebun said:
please use a normal font.
usb jig has no effect on the counter on this phone
Click to expand...
Click to collapse
Sorry, editing now
That sure is not sds, sds means no reaction at all, just black screen...
Did you try flashing philz recovery, then going into mounts and storage and formatting all partitions, after that flash a stock rom with odin
_________________________
tapatalked from GalaxyS3
FadeFx said:
That sure is not sds, sds means no reaction at all, just black screen...
Did you try flashing philz recovery, then going into mounts and storage and formatting all partitions, after that flash a stock rom with odin
_________________________
tapatalked from GalaxyS3
Click to expand...
Click to collapse
Yes I try to flash Philz recovery and the recovery says it´s successfull the installation but doesn´t work, when I try to format anythig I got this error on recovery:
"E: format_volume: make_extf4fs failed on /dev/block/mmcblk0p8"
FadeFx said:
That sure is not sds, sds means no reaction at all, just black screen...
Click to expand...
Click to collapse
no, not necessarily
Glebun said:
no, not necessarily
Click to expand...
Click to collapse
Exactly so.....you can have no screen or anything at all, or you can have no recovery but d/l mode still shows (worst case scenario)
Try flashing pit files with repartition ticked,to reformat partitions and then flash a Sammy stock rom(not deodexed or with root).worked on gs2 and should work on gs3 too..
slaphead20 said:
Exactly so.....you can have no screen or anything at all, or you can have no recovery but d/l mode still shows (worst case scenario)
Click to expand...
Click to collapse
I had SDS but the phone still booted.. just completely unusable with black squares all over the screen.. Samsung gave me a new phone saying it was the SDS issue..
Sent from my GT-I9300 using xda app-developers app

YP-G70 help

I'm terribly sorry is this is the wrong place to post this, but I'm new to the whole 'forums' in general thing.
A while ago, a friend came to me and said his android was growing buggy, so I told him how to factory reset it and such. Then I rooted it for him to clear it of any stock apps he didn't want. Now I've currently got the device next to me, and I've tried installing a custom rom onto it for him, to help make his device a bit faster and less buggy. I tried installing PAC-ROM ( http://forum.xda-developers.com/showthread.php?t=2235446 ), but I got the same error in CWM that I got when I tried to flash my HTC Glacier, which was remedied by updating to the latest CWM. I tried updating CWM from its current 5.0.2.7 to something 6.0+, but the 5.0 version sticks, which might be due to the fact that I used ODIN to flash the CWM according to a different XDA forum, which I cannot locate right now. Now, after attempting to flash PAC-ROM, and getting said errors, I seem to be unable to remount anything from CWM (/system, /data, etc), so the device cannot boot.
Is the device bricked for good, or is there something that can help me? I'm not totally inexperienced with flashing/customizing android, but I'm not great at it either.
Thanks for the help in advanced.
uhhh, what exactly did you flash to upgrade CWM? Did you use something for another device? Because you arent supposed to do that.
I would reboot into download mode, and then flash the stock firmware. Then you can flash a either RJ's kernel (for INTL) or Entropy's kernel (US) depending on what device you have. To flash PAC, you have to first flash a cm9 rom, reboot into recovery, and then flash PAC
iurnait said:
uhhh, what exactly did you flash to upgrade CWM? Did you use something for another device? Because you arent supposed to do that.
I would reboot into download mode, and then flash the stock firmware. Then you can flash a either RJ's kernel (for INTL) or Entropy's kernel (US) depending on what device you have. To flash PAC, you have to first flash a cm9 rom, reboot into recovery, and then flash PAC
Click to expand...
Click to collapse
I've reflashed stock through ODIN, and this showed up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do a wipe data and see if your errors are resolved
iurnait said:
Do a wipe data and see if your errors are resolved
Click to expand...
Click to collapse
I did, it gave me the 'error can't mount /system, /data, etcetc' thing, and then rebooted, and now it's stuck in CWM.
you probably need to find the pit file and flash that via odin. just keep holding the power and volume down keys until you are in recovery. then put the pit file in odin along with the stock firmware and flash.
Pits:
http://forum.xda-developers.com/showthread.php?t=1389873
iurnait said:
you probably need to find the pit file and flash that via odin. just keep holding the power and volume down keys until you are in recovery. then put the pit file in odin along with the stock firmware and flash.
Pits:
http://forum.xda-developers.com/showthread.php?t=1389873
Click to expand...
Click to collapse
Found the stock here http://forum.xda-developers.com/showthread.php?t=2192488 , but I get errors when trying to flash everything.
TacoSeeker said:
Found the stock here http://forum.xda-developers.com/showthread.php?t=2192488 , but I get errors when trying to flash everything.
Click to expand...
Click to collapse
After trying a few more times, I end up with the same screen as I posted before, the android recovery screen.
try downloading and extracting this: http://forum.xda-developers.com/attachment.php?attachmentid=812772&d=1323614740
this contains odin version 1.81, which has always worked for me.
TacoSeeker said:
Found the stock here http://forum.xda-developers.com/showthread.php?t=2192488 , but I get errors when trying to flash everything.
Click to expand...
Click to collapse
That PIT file is invalid. It has never worked and never will. If you need the pit file then get it from Adam Outler's post that has all the PIT files for the all players 5.0.
I didn't know what I was doing when I made it. I just dumped the partition that has the pit file on it and that is what that is. NO ONE SHOULD EVER USE ueki8.pit FROM YP-G70_UEKI8_MIN !!!
Try using Heimdall.
TheKryptonite said:
Try using Heimdall.
Click to expand...
Click to collapse
Heimdall says it can't connect to the devices, libusb error -12
iurnait said:
try downloading and extracting this: http://forum.xda-developers.com/attachment.php?attachmentid=812772&d=1323614740
this contains odin version 1.81, which has always worked for me.
Click to expand...
Click to collapse
Even after flashing using that, it still returns me to either the download screen, or the recovery screen.
Now the devices is stuck in a state where it won't exit download mode.
TacoSeeker said:
Heimdall says it can't connect to the devices, libusb error -12
Click to expand...
Click to collapse
Are you drivers installed? Did you install the drivers on Zadig?
TheKryptonite said:
Are you drivers installed? Did you install the drivers on Zadig?
Click to expand...
Click to collapse
Yes, I always stay updated on drivers on my PC.
TacoSeeker said:
Yes, I always stay updated on drivers on my PC.
Click to expand...
Click to collapse
Try uninstalling the Samsung drivers and Kies. Try to find the Samsung device and replacing/installing all drivers.
TheKryptonite said:
Try uninstalling the Samsung drivers and Kies. Try to find the Samsung device and replacing/installing all drivers.
Click to expand...
Click to collapse
Same result as before.
Try the instructions here. http://forum.xda-developers.com/showthread.php?p=44192192
Meticulus said:
Try the instructions here. http://forum.xda-developers.com/showthread.php?p=44192192
Click to expand...
Click to collapse
After all that, I still get the screen showed in my previous comment,

my i9300 is having a mysterious issue :/

Hello everyone!
I was previously running custom rom (C-rom 4.4.4) and yesterday i wanted to shift to stock, so i downloaded the latest I9300 file from sammobile (Jellybean 4.3) and flashed it directly using odin in download mode (i opened the download mode from power menu)
the device rebooted twice after which it is stuck on the samsung logo and not proceeding at all, tried going to recovery it booted into recovery but showing this symbol at the center of the screen, i noticed that i cant go down and the vol down button is dead for me, and this means i cant wipe data nor go to download mode anymore
anyone here knows any solution for this issue? i wanna go back to stock rom
ahmed bahaa said:
Hello everyone!
I was previously running custom rom (C-rom 4.4.4) and yesterday i wanted to shift to stock, so i downloaded the latest I9300 file from sammobile (Jellybean 4.3) and flashed it directly using odin in download mode (i opened the download mode from power menu)
the device rebooted twice after which it is stuck on the samsung logo and not proceeding at all, tried going to recovery it booted into recovery but showing this symbol at the center of the screen, i noticed that i cant go down and the vol down button is dead for me, and this means i cant wipe data nor go to download mode anymore
anyone here knows any solution for this issue? i wanna go back to stock rom
Click to expand...
Click to collapse
AFAIK that is the logo for stock recovery...try press the power button and it should appear the options to wipe etc, or try to install TWRP recovery and download ArchiDroid 1.7.18 is the best stock rom out there
Sent from my GT-I9300 powered by ArchiDroid+ArchiKernel
ahmed bahaa said:
Hello everyone!
I was previously running custom rom (C-rom 4.4.4) and yesterday i wanted to shift to stock, so i downloaded the latest I9300 file from sammobile (Jellybean 4.3) and flashed it directly using odin in download mode (i opened the download mode from power menu)
the device rebooted twice after which it is stuck on the samsung logo and not proceeding at all, tried going to recovery it booted into recovery but showing this symbol at the center of the screen, i noticed that i cant go down and the vol down button is dead for me, and this means i cant wipe data nor go to download mode anymore
anyone here knows any solution for this issue? i wanna go back to stock rom
Click to expand...
Click to collapse
Sounds like you didn't wipe data/factory reset before flashing via Odin. Try flashing cwm or twrp via Odin, go into recovery, wipe all data and cache, and then reflash stock ROM via odin.
Sent from my GT-I9300 using Tapatalk
gabyif said:
AFAIK that is the logo for stock recovery...try press the power button and it should appear the options to wipe etc, or try to install TWRP recovery and download ArchiDroid 1.7.18 is the best stock rom out there
Sent from my GT-I9300 powered by ArchiDroid+ArchiKernel
Click to expand...
Click to collapse
where to press the power button?
how to flash TWRP when i cant open download mode?
am2012 said:
Sounds like you didn't wipe data/factory reset before flashing via Odin. Try flashing cwm or twrp via Odin, go into recovery, wipe all data and cache, and then reflash stock ROM via odin.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
dude how can i do that when i cant open download mode? and how to wipe the data when my vol down button not working?
ahmed bahaa said:
where to press the power button?
how to flash TWRP when i cant open download mode?
dude how can i do that when i cant open download mode? and how to wipe the data when my vol down button not working?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just trying to help mate. Good luck.
Sent from my GT-I9300 using Tapatalk
am2012 said:
Just trying to help mate. Good luck.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
lol...it is okay man, no prob at all and thanks

Categories

Resources