372.8 MB
How to install video by TheRazrGuy:
www.youtube.com/watch?v=-TCgj5gbmf0
How to install from another ICS leak (same carrier, model, etc.):
Put the leak on your external SD card.
Fastboot a patched boot.img using the boot.img.p from this leak's /patch/ folder and the boot.img from the latest official version's fastboot files. (See my thread on patching boot images here: http://forum.xda-developers.com/showthread.php?p=27211509 )
NOTE: If someone posts a reply with a boot.img they patched, you can use that one as well. Only one person has to make one and post it.
Fastboot the system.img and preinstall.img from the latest official version
Boot to recovery and install the newer ICS leak.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mattlgroff's Notes:
Upgraded CDT.bin, so no going back to GB after this.
Android 4.0.4 ICS - "RTGB/XT910_RTGB/umts_spyder:4.0.4/6.7.2-180_SPU-19-TA-11.2/1339215326:user/release-keys"
HOW TO ROOT: http://goo.im/apps/mattlgroff/DroidRazrRoot404.zip ---- Run the batch file in this. Be connected via USB (MTP Mode recommended), and have USB Debugging Enabled (Settings>Developer Options)
Build date 9/6/2012
If you have Superuser left over and root is failing use this: http://rombot.droidhive.com/ROMs/spyder/ROOT/DroidRazrRoot404(IfYouAlreadyHaveSuperUser).zip
Must be on 651.167.26.XT910.Retail.en.EU stock rooted to install.
Updating post as more info comes along.
Download: http://goo.im/roms/mattlgroff/Blur_Version.651.167.26.XT910.Retail.en.EU.zip
MD5: CD65E827089384FB7D7FE1158E5E0AB3
[Guide] How to updrade from T-Mobile ICS to 672.180.17(33).XT910.Retail (UNBRICK) --- By HSD-Pilot
http://forum.xda-developers.com/showthread.php?t=1738769
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Be on STOCK 651.167.26.XT910.Retail.en.EU. No frozen apps. No custom recoveries, etc.
Install instructions are using ES File Manager and Rom Manager (free) from the Play Store download these and be rooted on 651.167.26.XT910.Retail.en.EU.
open rom manager free, hit OK, now press the home button.
open es file explorer, press YES, press menu, open settings, scroll down to Path settings and under Root settings: Enable
Up to Root (path settings)
Root Explorer (root settings)
Mount File System (root settings)
"DOWNLOAD THE ICS UPDATE ZIP AND PLACE INTO YOUR PHONES /CACHE DIRECTORY (not /system/cache, but in the root of the phone)"
open ES FILE EXPLORER, locate your /cache directory and then select the Blur_Version.651.167.26.XT910.Retail.en.EU.zip
(now choose Open With ROM MANAGER)
phone will restart, and begin installation of the ICS leak (takes 10-15minutes)
phone restarts, boot animation begins, Android is upgrading :: Profit success!! Celebrate!!!
----------------------------------------------------------------------------------------------------------------------------------------------------------------
LOL, Motorola server must be busy with your download activity..
I can foresee a need for offline patching tool.
Yes Whirleyes, offline patching tool would be great
I'll try to add it to my BootMenu Manager app
whirleyes said:
I'll try to add it to my BootMenu Manager app
Click to expand...
Click to collapse
Hi mate do it as an apart tool. Many doesn't know howto manually patch.
This sounds really usefull.
Cheers
Sent from my XT910 using xda premium
Passed as 100 names of Firmware for the RAZR, I hope you get them all lol
Sorry my bad english xD
pedrotorresfilho said:
Hi mate do it as an apart tool. Many doesn't know howto manually patch.
This sounds really usefull.
Cheers
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Indeed. Will call it MotoPatcher
Pzyduck said:
Passed as 100 names of Firmware for the RAZR, I hope you get them all lol
Sorry my bad english xD
Click to expand...
Click to collapse
You still missing XT909,XT910S&XT910K firmwares
Blur_Version.65.3.58.XT910K.KT.en.KR
65.88.12.XT910.ChinaRetail.en.CN
Blur_Version.651.167.3370.XT910.Movistar.en.01
Blur_Version.651.73.250.XT910.AmericaMovil.en.01
Blur_Version.651.167.3370.XT910.Brasil.en.BR.zip
:good:
lol
is it for 167.26 en.eu ?
sevenup30 said:
is it for 167.26 en.eu ?
Click to expand...
Click to collapse
Must be on 651.167.26.XT910.Retail.en.EU stock rooted to install.
Yup
whirleyes said:
LOL, Motorola server must be busy with your download activity..
I can foresee a need for offline patching tool.
Click to expand...
Click to collapse
Good foresight
I'll leave it to you XT910 folks to make that tool lol
sevenup30 said:
is it for 167.26 en.eu ?
Click to expand...
Click to collapse
exaclty. it's the new ics ota. and looks like the real thing.
cheers
so if we are already on the earlier stock en.eu leak, the .17 one, will we be able to install it? And if so, how? Thanks.
ales100i said:
so if we are already on the earlier stock en.eu leak, the .17 one, will we be able to install it? And if so, how? Thanks.
Click to expand...
Click to collapse
You have to patch the boot.img from previous gb and flash it with system_signed from the same gb version.
Sent from my XT910 using xda premium
Hi all guys.
I'm on ICS leak 672.152.27.Retail.en.EU.
Can I update using .26 patched file (2.3.6) from here, put new leak in my ext-sd and start update by stock recovery after a wipe cache?
Verifying current system...
assert failed: apply_patch_check("MTD:boot:8388608:0b5........
E:Error in /tmp/sideload/package.zip(status 7)
i flash boot_new.img then system_signed from right GB like i used to do with the previous EU leak.
sevenup30 said:
Verifying current system...
assert failed: apply_patch_check("MTD:boot:8388608:0b5........
E:Error in /tmp/sideload/package.zip(status 7)
i flash boot_new.img then system_signed from right GB like i used to do with the previous EU leak.
Click to expand...
Click to collapse
Reinstall preinstall of 2.3.6
Pzyduck said:
Reinstall preinstall of 2.3.6
Click to expand...
Click to collapse
that what i did, but no luck... i reflash the previous enEU leak and it passed great.
It seems that new ota dont only check system but also the boot partition.
Pzyduck said:
Reinstall preinstall of 2.3.6
Click to expand...
Click to collapse
Nah man thats a boot.img problem. He needs to flash the boot.img for THIS update. Which I am not sure if someone made it or not yet.
Related
Unlocked bootloader required.
First, you need to unlock the bootloader referred to [TUTORIAL] Sony Ericsson Xperia Arc bootloader unlocking by lollylost100.
Then, download the system image you needed:
[New 2011-05-27] R800i_3.0.1.A.0.145_UK_system.zip (155.9 MB)
http://www.multiupload.com/BFNXWME4QB
http://u.115.com/file/bh1yeh44
PS: It's highly recommand to flash the unrooted .145 UK tft ([ROM] R800i_3.0.1.A.0.145 - Generic UK Firmware by thomassafca) via flashtool and flash this rooted images becuase the Baseband version was updated.
Downlaod the Android SDK (android-sdk_r11-windows.zip) via http://developer.android.com/sdk/
Extract android-sdk_r11-windows.zip to C:\
Extract the system.zip file to C:\android-sdk-windows\tools and downloaded the SYSTEMFILE.img file. (Filename will get different)
Open "SDK Manager.exe" from C:\android-sdk-windows
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Press "Cancel" from the "Choose Packages to Install" box.
Go to "Available packages" and double click "Android Repositoey".
Choose "Android SDK Platform-tools, revision 4" and click "Install Selected".
Click "Install".
Installing...
Click "Yes" to restart the ADB.
Click "Close" and close the SDK Manager.
Go to "C:\android-sdk-windows\platform-tools" and copy AdbWinApi.dll AdbWinUsbApi.dll to "C:\android-sdk-windows\tools"
C:\android-sdk-windows\tools (Before)
C:\android-sdk-windows\tools (After)
Make sure that the .dll files in C:\android-sdk-windows\tools
Unplug the USB cable and power off the phone
Press the "Search" button and plug the USB cable.
After that you will see the BLUE Notification light.
Go to the Start menu and click Run. Type cmd and press enter.
Type
Code:
cd \android-sdk-windows\tools
fastboot devices
and press enter.
If you got XXXXXXXXXXXXXX fastboot that means your phone successfully connected.
Then, you can flash the system img to phone.
Type
Code:
fastboot flash system [B]SYSTEMFILE.img[/B]
and wait a few minutes. (Please change SYSTEMFILE.img to the file your have extracted)
After Flash operation complete, reboot the phone!
Regards,
Kan
Downloading now will report back when flashed and booted
can confirm success, works fine!
will now reflash my package so i can wipe, flash the img file and use titanium backup to restore back.
~Many thanks
thanks kanzone, it's really apreciated
so this is confirmed to work then
nukester84 said:
so this is confirmed to work then
Click to expand...
Click to collapse
yes its working
nukester84 said:
so this is confirmed to work then
Click to expand...
Click to collapse
waz000000 said:
Downloading now will report back when flashed and booted
can confirm success, works fine!
will now reflash my package so i can wipe, flash the img file and use titanium backup to restore back.
~Many thanks
Click to expand...
Click to collapse
FrAsErTaG said:
yes its working
Click to expand...
Click to collapse
Thanks all for testing and report.
Regards,
Kan
Sent from my LT15i using XDA Premium App
Thanks a lot
so does this completely wipe all your data? ill probably wait for an easier root method. Good going though
No this doesn't wipe your data
Could someone convert this to a .ftf for me please
Sent from my R800i using XDA App
Can someone reply REALLY quickly as i'm going out for the weekend in about 2 hours and want this done before i leave.....
Basically, all i need to do is:
1. flash the non-rooted rom
2. reboot handset
3. flash the rooted rom
4. reboot handset
5. enjoy the rooted fun of my play!!
EDIT:
OK, so i just went ahead and did it, and guess what, IT WORKED!!!!!
**** myself slightly after flashing the non-rooted ftf file, but it all went smoothly and i am now rooted on 2.3.3
nukester84 said:
Could someone convert this to a .ftf for me please
Sent from my R800i using XDA App
Click to expand...
Click to collapse
We are not able to create the .ftf becuase there were something encrypted.
Regards,
Kan
Just tried Pauls gtalk with video on this new update. And can confirm it now works. link is in another thread.
Sent from my R800i using XDA Premium App
Rooted and Booted Thanks very much Kan.
Something to note to others:
1. the sdk is now r11
2. the adbXXXX.dll file required has been moved from the default "tools" directory to "platform-tools" so you need to update the PATH system variable to ensure it is seen by windows when u run the fastboot command. Took me a while to figure that out, I don't read the readme files as a general rule
I'll write up more if needed, right now I'm tired and there is beer in the fridge & poker tourns about to start
Have a great weekend all...
Rixter757 said:
Rooted and Booted Thanks very much Kan.
2. the adbXXXX.dll file required has been moved from the default "tools" directory to "platform-tools" so you need to update the PATH system variable to ensure it is seen by windows when u run the fastboot command.
Click to expand...
Click to collapse
This was already so in the last version, I just copied all the content from platform-tools into the tools folder, problem solved
Rixter757 said:
Rooted and Booted Thanks very much Kan.
Something to note to others:
1. the sdk is now r11
2. the adbXXXX.dll file required has been moved from the default "tools" directory to "platform-tools" so you need to update the PATH system variable to ensure it is seen by windows when u run the fastboot command. Took me a while to figure that out, I don't read the readme files as a general rule
I'll write up more if needed, right now I'm tired and there is beer in the fridge & poker tourns about to start
Have a great weekend all...
Click to expand...
Click to collapse
Thanks for your information.
I'll update the step to r11 soon.
Regards,
Kan
Sent from my LT15i using XDA Premium App
this way (boot loader unlocked) will stop track ID right? Then the like button in music app wont work waiting for a locked root method
tried flashing the rooted image after the original image
Hi I tried to flash the rooted image over the unrooted image mentioned in the 1st post. But fastboot gave error message: FAILED (remote: The device must be rooted first).
Anyone encounters this problem?
thanks in advance
zceep24 said:
Hi I tried to flash the rooted image over the unrooted image mentioned in the 1st post. But fastboot gave error message: FAILED (remote: The device must be rooted first).
Anyone encounters this problem?
thanks in advance
Click to expand...
Click to collapse
to flash using fastboot you first need unlocked bootloader.
Sent from my R800i using XDA Premium App
NielDK said:
to flash using fastboot you first need unlocked bootloader.
Sent from my R800i using XDA Premium App
Click to expand...
Click to collapse
works perfectly. thanks for the info
Im trying to update to a new 2.2.2 update that bell just released for canadian users.
I download it, I press install, it reboots my phone into android recovery.
It begins to install the update, then it shows me this:
verifying current system...
assert failed: apply_patch_check ("/system/app/AccountAndSyncSettings.apk". "a bunch of numbers", "A bunch of numbers", E:Error in /cache/Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
(Status 7)
Installation Aborted.
Can anyone help? Its really frustrating not being able to update.
My phone was rooted, deodexed, and I flashed a few .zip's to it. I factory reset it before I attempted to do this update.
HELP WOULD BE GREATLY APPRECIATED
This is the menu I'm in when I talk about "android recovery"
However, this is not my phone. This picture is just to jog your memory if you dont know what im talking about.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just reboot El phone
Sent from my MB860 using XDA App
neer2005 said:
Just reboot El phone
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Remove my battery and reboot it? The update said it would reboot itself.
Also, what does the picture I'm describing mean?
Thanks.
are we talking about 2.3.4 or what kind of update?
It means your phone is rooted and you need to do an SBF flash
Pretty sure that is the recovery screen. If I remember correctly if you touch above the search button it should take you into the recovery menu
samcripp said:
are we talking about 2.3.4 or what kind of update?
Click to expand...
Click to collapse
He's talking about the update from Bell that came out today. Its similar to the 4.1.83 update from At&t
Sorry guys its the 2.2.2 update released for bell atrices (in canada)
There is no menu unfortunately.
It looks like the bottom portion of this image, there is no menu.
Try pressing the bottom left and right corners, should bring up that screen.
Cheers!
Since it's 43MB is size, I am guessing glad root or my util should be able to preserver root using frozenfish in /osh/sbin.
Downloading it now, Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip in /cache, I'll upload it to my dropbox for folks when it's done.
Cheers!
How can those who have flashed 2.1.1 get this update?
You would need stock Bell firmware for an update to apply I would think. Probably not much different that what you have anyway, I'll see if I can nab the radio from it though.
NFHimself said:
Try pressing the bottom left and right corners, should bring up that screen.
Cheers!
Since it's 43MB is size, I am guessing glad root or my util should be able to preserver root using frozenfish in /osh/sbin.
Downloading it now, Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip in /cache, I'll upload it to my dropbox for folks when it's done.
Cheers!
Click to expand...
Click to collapse
Thanks so much. That brought up the screen.
However, my update failed. I'll post the exact error or PM you if I can't figure it out for myself.
Will that update be flashable via CWM? And where can I find your dropbox.
Regards,
Mag
I'll post when I get it done.
Here you go:
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.crc
/cache/recovery/command = --update_package=CACHE:Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
Frozenfish works to get root access again, in fact your su and shsu binaries stay in the system folder, all you have to do is chmod 06755 /system/bin/shsu etc.
Cheers!
NFHimself said:
You would need stock Bell firmware for an update to apply I would think. Probably not much different that what you have anyway, I'll see if I can nab the radio from it though.
Click to expand...
Click to collapse
(n00b question) Why would the radio be useful and how would I install it?
DELETE POST NFHimself is too damn fast
My error log while updating in android recovery haas been posted on my original post!
Please help! Thanks!
IrshaadH said:
(n00b question) Why would the radio be useful and how would I install it?
Click to expand...
Click to collapse
Well, if you are using a Bell Atrix in Canada and it's working right, then why not? How is unknown to me right now, the files are in the zip, might be able to do a swap in an sbf, not sure.
Just got 1850 in a speed test for upload indoors, fastest I've had yet, previous was ~1780, that could be a good reason.
Cheers!
Magnetox said:
My error log while updating in android recovery haas been posted on my original post!
Please help! Thanks!
Click to expand...
Click to collapse
I had the same error, I odexed my system and copied the zip and crc back to cache, and did the update again, it asked me if I wanted to install it, and as it was doing that I grabbed the command file from /cache/recovery and put it on my sdcard. So really, all you need to do is have those 3 files in /cache and reboot into android recovery and you should be good to go.
I am thinking that it's the patch files that need to have the original files in order to work.
Cheers!
y2whisper said:
zip is here if for some reason you have a bell rom and have trouble downloading.
http://db.tt/eo1hyTK
Click to expand...
Click to collapse
So, with this zip, would I be able to install on a 2.1.1 sbf from recovery mode?
This thread doesn't belong here.
More info coming.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mattlgroff's Notes:
HOW TO ROOT: http://goo.im/apps/mattlgroff/DroidRazrRoot404.zip ---- Run the batch file in this. Be connected via USB (MTP Mode recommended), and have USB Debugging Enabled (Settings>Developer Options)
CDT.bin is upgraded so NO GOING BACK TO GINGERBREAD.
Android ICS 4.0.4 (PERAR/XT910_MOTO_PERAR/umts_spyder:4.0.4/6.7.2-180_SLC-34/1340683866:user/release-keys)
If you have Superuser left over and root is failing use this: http://rombot.droidhive.com/ROMs/spyder/ROOT/DroidRazrRoot404(IfYouAlreadyHaveSuperUser).zip
Download: http://goo.im/roms/mattlgroff/Blur_Version.651.73.250.XT910.Personal.en.AR.zip
MD5: 59A8835C03E4212F7CAA09EC3BE35C57
How to install from another ICS leak (same carrier, model, etc.):
Put the leak on your external SD card.
Fastboot a patched boot.img using the boot.img.p from this leak's /patch/ folder and the boot.img from the latest official version's fastboot files. (See my thread on patching boot images here: http://forum.xda-developers.com/showthread.php?p=27211509 )
NOTE: If someone posts a reply with a boot.img they patched, you can use that one as well. Only one person has to make one and post it.
Fastboot the system.img and preinstall.img from the latest official version
Boot to recovery and install the newer ICS leak.
Thanks andlaw for the adapted install instructions from your DR thread: http://www.droidrzr.com/index.php/topic/2871-how-to-upgrade-from-181-to-211-sideload/
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Be on STOCK 651.73.250.XT910.Personal.en.AR. No frozen apps. No custom recoveries, etc.
Install instructions are using ES File Manager and Rom Manager (free) from the Play Store download these and be rooted on 651.73.250.XT910.Personal.en.AR.
open rom manager free, hit OK, now press the home button.
open es file explorer, press YES, press menu, open settings, scroll down to Path settings and under Root settings: Enable
Up to Root (path settings)
Root Explorer (root settings)
Mount File System (root settings)
"DOWNLOAD THE ICS UPDATE ZIP AND PLACE INTO YOUR PHONES /CACHE DIRECTORY (not /system/cache, but in the root of the phone)"
open ES FILE EXPLORER, locate your /cache directory and then select the Blur_Version.651.73.250.XT910.Personal.en.AR.zip
(now choose Open With ROM MANAGER)
phone will restart, and begin installation of the ICS leak (takes 10-15minutes)
phone restarts, boot animation begins, Android is upgrading :: Profit success!! Celebrate!!!
----------------------------------------------------------------------------------------------------------------------------------------------------------------
mattlgroff said:
More info coming.
Click to expand...
Click to collapse
This one looks as a new build. .340
Can you try again the brasil retail? I can't run nothing till next weekend.
Cheers
Sent from my XT910 using xda premium
pedrotorresfilho said:
This one looks as a new build. .340
Can you try again the brasil retail? I can't run nothing till next weekend.
Cheers
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
I will try, its on my list lol
mattlgroff said:
I will try, its on my list lol
Click to expand...
Click to collapse
Can you check the build date of this? Really seems new stuff.
I'll send you a cold beer, you deserve it.
Good job
Sent from my XT910 using xda premium
Thanks you so much mattlgroff
And sorry for the long list of firmwares that will pass lol
pedrotorresfilho said:
Can you check the build date of this? Really seems new stuff.
I'll send you a cold beer, you deserve it.
Good job
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
I cannot without patching build.prop myself which I am a tad busy lol.
I have the BR file information setup, just have to finish uploading this newest leak and I can start a search.
Thanks for the cold beer
How to install this over the OTA 672.180.17.XT910.Retail.en.EU leak?
do I need to flash new boot.img first?
cheers.
pedrotorresfilho said:
Can you check the build date of this? Really seems new stuff.
I'll send you a cold beer, you deserve it.
Good job
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
ro.build.id=6.7.2-180_SLC-34
ro.build.display.id=6.7.2-180_SLC-34
ro.build.version.incremental=1340683866
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Mon Jun 25 23:44:09 BRT 2012
ro.build.date.utc=1340678649
ro.build.type=user
ro.build.user=hnvc47
ro.build.host=zbr05lnxdroid12
ro.build.tags=release-keys
ro.product.model=XT910
ro.product.brand=PERAR
ro.product.name=XT910_MOTO_PERAR
ro.product.device=umts_spyder
ro.product.board=spyder
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=es
ro.wifi.channels=
ro.board.platform=omap4
Enviado desde mi XT910 usando Tapatalk 2
It's fantastic, thanks man.
great! a favor, someone could upload it to another mirror because the only thing there is down.
Thank you very much matt!
rogerscrack said:
great! a favor, someone could upload it to another mirror because the only thing there is down.
Thank you very much matt!
Click to expand...
Click to collapse
Temporary Relief Mirror: http://dl.dropbox.com/u/15093625/Blur_Version.651.73.250.XT910.Personal.en.AR.zip
Good! thanks again
Sent from my XT910 using Tapatalk 2
As the rooted from the P700 (L7) is expensive since left the V10K ROM, I've been given turns the issue rooted, wanted that it would be easy for the uninitiated in the field, and at the end tube success. This is the result, A ROM in format KDZ!
This is the first Custom ROM I do format KDZ.
FEATURES
- ROOT
- Recovery ClockWorkMod
- Unlocked Bootloader
- Stock ROM
Click to expand...
Click to collapse
FLASHER
That do you at your own risk, neither I nor the Forum are responsible for if your phone breaks.
Click to expand...
Click to collapse
As in format KDZ installed as an official ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1- Run the program KDZ_FW_UPD.exe
2a- For an update (Does not delete anything)
-- We connect the phone to PC mode Software LG or PC Suit
2b- For a clean installation (It will erase everything, factory reset)
-- Remove the battery to the L7 and while holding the key Vol+ connect the USB to the PC
3- Find the ROM V10K_00-ROOT-CWM-NewBT-by_Homero.kdz.rar - 267.68 MB (updated) clicking KDZ file
4- Finally click Launch software update
Click to expand...
Click to collapse
That's all, I hope you serve.
Thank you
- To Copsfrance by DZCreate and DZDecrypt program and aDambi by modifying it for the L7.
- Miki89 and NormanD of XDA to discover and test the CWM and the modified Bootloader.
- To the author of these modifications of the 4PDA Forum, who is saying it and put your name here.
Extracted from www.todomovillg.es
Click to expand...
Click to collapse
- Reserved
Congrats! Very useful for noob users...!
R: [ROM KDZ] L7 - V10K_00 | ROOT | CWM | NewBT | by Homero
So I can flash the rom even without.having unlocked BL/CWM? Thanks!
Sent from my LG-P700 using xda app-developers app
greate..good work..
doesnt work, comes up with kdz decrypt error, extract file error
Wolf80 said:
So I can flash the rom even without.having unlocked BL/CWM? Thanks!
Click to expand...
Click to collapse
Correct, that is.
Joomlad said:
doesnt work, comes up with kdz decrypt error, extract file error
Click to expand...
Click to collapse
You are running everything as administrator
Joomlad said:
doesnt work, comes up with kdz decrypt error, extract file error
Click to expand...
Click to collapse
Use this program to Flash. test-version-upTest_EX.rar - 476.96 KB
Apologies for the error, it had duplicated the DLL.
I'm uploading the new corrected compilation.
To see if this can be Flash, I flashed without problems, (though another also did so without problems)
V10K_00.kdz - 266.99 MB
How did you create dz file ??? Have you config file for dzcreate ?
mlody95pl said:
How did you create dz file ??? Have you config file for dzcreate ?
Click to expand...
Click to collapse
If all that info that you ask for it you have in the works of Copsfrance, you'll find the link in acknowledgments, reads one of the last posts (aDambi)
Thank you
- To Copsfrance by DZCreate and DZDecrypt program and aDambi by modifying it for the L7.
- Miki89 and NormanD of XDA to discover and test the CWM and the modified Bootloader.
- To the author of these modifications of the 4PDA Forum, who is saying it and put your name here.
Click to expand...
Click to collapse
Thanks you. I will try to create kdz. I have one more question. Did you edit system image like this ? If not can you write tutorial or send me link ?
mlody95pl said:
Thanks you. I will try to create kdz. I have one more question. Did you edit system image like this ? If not can you write tutorial or send me link ?
Click to expand...
Click to collapse
Compile KDZ learned that some years ago, when it created firmwares for the LG KM900 ARENA
What happens is that each device has its particularity and a series of specific files.
I'm going to create a tutorial for compiling KDZ
mlody95pl said:
Thanks you. I will try to create kdz. I have one more question. Did you edit system image like this ? If not can you write tutorial or send me link ?
Click to expand...
Click to collapse
[TUTO] Create ROM formto KDZ for the L7 - L5 - L3
Hello.
I installed this rom but why LG weathered widget deleted!
maxomid said:
Hello.
I installed this rom but why LG weathered widget deleted!
Click to expand...
Click to collapse
OPS... Really!, I will create a new ROM including this APP
celica553 said:
i almost download ur v10K root ROM
if i install it i will can get on recovery mode or i have to do something else before?
Click to expand...
Click to collapse
Hi celica553
This ROM installed the LG Stock version rooted, unlocked bootloader, and the alternative recovery CWM.
Replying to your question, Yes, you can go to the recovery
how to go in cwm
leoncropro said:
how to go in cwm
Click to expand...
Click to collapse
Just Install Rom Manager and press Reboot In Recovery..
Pre-Rooted Stock Firmware
Goodevening everybody,
Many of us love root but want to stay stock (like me) well. By following this guide: link ©quetzalcoatl2435. I was able to pre-root Stock Central Europe 1.
This thread is made with only one purpose: To share it!
If you want me to make one of your own choosing (branded, unbranded, generic etc) give me a call + download link for your ftf file and I'm good to go. Or follow the guide I linked to!
Details of all the pre-rooted ROMS I've made:
Fully stock
No bloatware removed or added (you can do this yourself now)
Still Odex
No CWM after flashing but you should be able to install it again
REQUIREMENTS
CWM (downgrade to 4.1.2 root it and install CWM)
This SU zip Link
This Kernel File Link
Flashtool
Patience
STEPS:
Download the .zip file (see downloads)
Put the pre rooted firmware + SU zip into your internal SD
Flash both files and turn the phone off
Open flashtool into flashmode
Flash 266 kernel
Reboot device
Done
If you want to have a custom Recovery you could try to flash the following zip:
- Download: Dev Host
DOWNLOADS
Stock FirmWare CE 1 Pre-Rooted
- Download: Google Drive
Stock FirmWare Global Pre-Rooted
- Download: Google Drive
Stock Firmware Generic IN Pre Rooted (C5302)
- Download: Google Drive
SCREENS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you due to any reason want to go back to fully Stock without root and the lose of data:
Flash Stock ROM via Flashtool but uncheck DATA at WIPE this will keep your installed applications etc
~Credits:
Many thanks to quetzalcoatl2435 for his amazing guide
dssmex for the recovery zip
Chainfire for the SU
Sony for the firmware
Google for Android
Me for rooting and sharing (bit selfish not to put my own name here :angel: )
Thanks
I share Central Europe 1 .266
Mirrors will come in handy.. As Google Drive is slow and I dont have or use mediafire/devhost.
Has someone bootlop? I have "SONY" again and again...
No it is running fine here. You did flash the kernel after flashing the rom itself?
Yes i did. I followed the instriction. I'll try once again tomorrow. How log Xperia is starting after flash? Maybe I waited too short. I have logo SONY which is dissapearing and showing again.
Well it is weird actually since I have it fully booting etc.
You can try a few things:
- Redownload and reflash
- Reflash
- update to 266 downgrade and try again
Finaly i flashed rom. Everything was allright until I try use titanum backup.IT says theres no root access. I checked supersu (the same about no root) and root checker. I Think root dissapeared after flash 266 kernel only. I have no idea, IT is to much for me.
Everything works fine, SU too. Thanks.
wipe?
Do I have to wipe anything prior to installing?
---------- Post added at 08:38 AM ---------- Previous post was at 08:22 AM ----------
I have done everything according to the OP.
I don't have root after all. Titanium Backup says that and I have no SuperSU either.
Weird...
Any idea?
moolash said:
Do I have to wipe anything prior to installing?
---------- Post added at 08:38 AM ---------- Previous post was at 08:22 AM ----------
I have done everything according to the OP.
I don't have root after all. Titanium Backup says that and I have no SuperSU either.
Weird...
Any idea?
Click to expand...
Click to collapse
well done
good for a base
dipesh1502 said:
well done
good for a base
Click to expand...
Click to collapse
What do you mean? I don't get it
You flashed the Su zip? Because the program and a few needed files are in there If not then you have to start over since CWM is removed after installing the ROM.
mrjraider said:
You flashed the Su zip? Because the program and a few needed files are in there If not then you have to start over since CWM is removed after installing the ROM.
Click to expand...
Click to collapse
Yes, I have. I flashed the ROM, then SU.zip, power off, flash .266 kernel only.
Reboot. All is fine, except for no root.
To be honest, I am already back to the CWM backup of 4.1.2 with root and CWM and bloat removed.
Your job is appreciated, though.
moolash said:
Yes, I have. I flashed the ROM, then SU.zip, power off, flash .266 kernel only.
Reboot. All is fine, except for no root.
To be honest, I am already back to the CWM backup of 4.1.2 with root and CWM and bloat removed.
Your job is appreciated, though.
Click to expand...
Click to collapse
Haha, thanks!
I just dont know why you cant get it to work
Thanks. everything works
You're welcome
Is it ok to flash directly from Existenz 2.1.5 which is based .266? or Do i really need to downgrade to 4.1.2?
:good::good::good::good:
Great
Is it ok to flash directly from Existenz 2.1.5 which is based .266? or Do i really need to downgrade to 4.1.2?