Hi everyone, I've been lurking around here unregistered since I got my first Android device last year, namely the ZTE Blade.
Now however, I'd love to get help because somehow I've managed to make my brand-new tablet not to boot, and I seek expertise from the experts.
I've searched around both Google and here on XDA, but haven't found anything because I don't know how to search for it, due to the fact that the error is in Chinese.
So to make a story short I just arrived today from a trip in HongKong.
I was very pleased with my ZTE Blade so I decided I'd buy a cheap Android-running tablet during my stay, and so I did.
I got myself an "Acho C908", which I tested in the store first. May be an unknown brand, but it's a really nice tablet.
It sure has nice specifications and I was pleased with the performance for the price I payed, however I managed to make things worse.
Everything was going good except I couldn't install any apps in Playstore, I always got the “Error Processing Purchase DF-BPA-09″. So I searched this error up and found the guide: ...technipages.com/google-play-error-processing-purchase.html
I followed the guide and cleared the data from Google Services Framework. However, after doing so things got bad. My tablet began to freeze so I restarted it. After it booted the "explorer" (forgot the name in Android, refering to Windows-term) didn't answer and crashed and the tablet froze again.
So I rebooted it again and here's where I got stuck.
The thing is that I don't seem to have bricked my tablet, because I'm able to pass the boot logo, however I'm getting stuck at something else. The worse thing is that because of the tablet being a Chinese one, the text is in Chinese! However, this happened to me at the airport when I was heading back from HongKong so I managed to ask some Chinese people.
Here's the "error".
XXX.img692.imageshack.us/img692/4594/tableth.jpg
(please replace the XXX with WWW)
From what the Chinese people I asked told me, it says something about "Password Failure" and that I would need to "Reset to Default Settings"?
I have tried to enter some sort of Factory Settings/Hard Reset mode, but holding Volume+ or Volume- or both together during turn on of the device yielded nothing but getting stuck at the first logo during start-up, namely "ACHO".
So do you have any guesses on what to do?
I actually bought two of these tablets, one for me and one for my father. So if there's any information on the working tablet you would need to help me, I would be able to provide you with that.
I'd love to get my new tablet working.
Thank you very much in advance.
Best Regards
Nikkop
acho c98
nikkop said:
Hi everyone, I've been lurking around here unregistered since I got my first Android device last year, namely the ZTE Blade.
Now however, I'd love to get help because somehow I've managed to make my brand-new tablet not to boot, and I seek expertise from the experts.
I've searched around both Google and here on XDA, but haven't found anything because I don't know how to search for it, due to the fact that the error is in Chinese.
So to make a story short I just arrived today from a trip in HongKong.
I was very pleased with my ZTE Blade so I decided I'd buy a cheap Android-running tablet during my stay, and so I did.
I got myself an "Acho C908", which I tested in the store first. May be an unknown brand, but it's a really nice tablet.
It sure has nice specifications and I was pleased with the performance for the price I payed, however I managed to make things worse.
Everything was going good except I couldn't install any apps in Playstore, I always got the “Error Processing Purchase DF-BPA-09″. So I searched this error up and found the guide: ...technipages.com/google-play-error-processing-purchase.html
I followed the guide and cleared the data from Google Services Framework. However, after doing so things got bad. My tablet began to freeze so I restarted it. After it booted the "explorer" (forgot the name in Android, refering to Windows-term) didn't answer and crashed and the tablet froze again.
So I rebooted it again and here's where I got stuck.
The thing is that I don't seem to have bricked my tablet, because I'm able to pass the boot logo, however I'm getting stuck at something else. The worse thing is that because of the tablet being a Chinese one, the text is in Chinese! However, this happened to me at the airport when I was heading back from HongKong so I managed to ask some Chinese people.
Here's the "error".
XXX.img692.imageshack.us/img692/4594/tableth.jpg
(please replace the XXX with WWW)
From what the Chinese people I asked told me, it says something about "Password Failure" and that I would need to "Reset to Default Settings"?
I have tried to enter some sort of Factory Settings/Hard Reset mode, but holding Volume+ or Volume- or both together during turn on of the device yielded nothing but getting stuck at the first logo during start-up, namely "ACHO".
So do you have any guesses on what to do?
I actually bought two of these tablets, one for me and one for my father. So if there's any information on the working tablet you would need to help me, I would be able to provide you with that.
I'd love to get my new tablet working.
Thank you very much in advance.
Best Regards
Nikkop
Click to expand...
Click to collapse
try to download the new firmware here:
http://www.acho.com/downc.asp?ID=3476
put it in sd card
boot the tablet in recovery mode (vol- and on)
launch "update frome external card
reboot
I don' remember al the steps: please read the istruction on achos site too, at the same link above
bye
Related
I did a search for this issue, and I cant find a solution mentioned anywhere on this sire, or any other for that matter.
I just got my new HTC Magic 32A, and decided to root it. The reason I wanted to do this was simply to be able to access the pay applications, as Rogers in Canada blocks it.
I did the root following the 'theunlockr.com' procedure, using the flashrec-1.1.3-20091107-2.apk and recovery.RAv1.2.3H.
I typed in the following text into the empty box during the process " /sdcard/recovery-RAv1.2.3H.img ".
I tried loading few custom ROMs, but it refused each time, citing an error (different errors, as I recall).
The new ROM wasnt a big deal, so I decided to simply turn on the phone. The phone it stuck on the 'Rogers' logo, and after a while it turns into android letters on a black screen. Basically I am left without a phone, after spending pretty much everything I had on it.
At this point, all I want to do is revert it back to the original state and forget about it all. I tried doing the hard reset, to no avail. Tried doing the procedure with the sappimg.nbh file, but it turned out it only works for the mytouch in the states. The only other procedure they have on the website is through loading some sort of a file onto the phone, but I can't do that as the phone doesnt turn on! Kind of sucks, especially with Christmas coming up soon.
Guys, I am totally stuck and help would be really appreaciated.
Thanks to everyone in advance.
Bump.
Someone please help....
I am able to get into the phone by pressing "power + volume down" as well as "power plus home".
Is the phone dead?
Will giving you an spl and radio versions help? How do I get these numbers?
I am willing to up the ante, as I will donate $40 to the first person who fixes my phone, if possible.
Phone fixed.
Hello everyone, I have a two month old trio stealth pro tablet, and I have been having issues with it. For some reason it freezes on startup after the android logo. I have tried combinations of keys to try to get into a recovery mode, but have been unable to do so. I am not sure what other things
I could try to get this tablet back on its feet. I have looked at getting a different rom, however I do not know enough to feel comfortable taking the risk and possibly bricking my tablet. I wonder if I can use livesuite if the android system itself is not fully loading. Every once in a while ( once every few days) I am able to get past the screen and am able to do stuff on the tablet, but then I get constant errors, for example google maps has stopped responding, contacts has stopped responding, and other random programs. For now my goal is to at least get it to load, if anyone can help it would be greatly appreciated.
pancerny1 said:
Hello everyone, I have a two month old trio stealth pro tablet, and I have been having issues with it. For some reason it freezes on startup after the android logo. I have tried combinations of keys to try to get into a recovery mode, but have been unable to do so. I am not sure what other things
I could try to get this tablet back on its feet. I have looked at getting a different rom, however I do not know enough to feel comfortable taking the risk and possibly bricking my tablet. I wonder if I can use livesuite if the android system itself is not fully loading. Every once in a while ( once every few days) I am able to get past the screen and am able to do stuff on the tablet, but then I get constant errors, for example google maps has stopped responding, contacts has stopped responding, and other random programs. For now my goal is to at least get it to load, if anyone can help it would be greatly appreciated.
Click to expand...
Click to collapse
I am having the same problem. Luckily I took a dump of all of the partitions and have a lot of the info about it saved (partition info, boot layout, etc) while I was working on getting a working recovery for it, so maybe I'll be able to figure something out to bring it back to life.
FYI, it didn't break it doing the recovery mods... I was actually well on my way with that one. it happened after letting it sit for couple weeks. I'm hoping it's not a bad flash chip.
You can check out my Guide found on this Thread: Help for the TRIO STEALTH PRO 7C
This might be able to help you flash a fresh ROM and hopefully fix your device.
Hi Everyone!
This is my first post on the board, so at begin I wanna say that topics here are very helpful. Always when I've had a problem I could to find answer somewhere here. However, today I can't.
Some time ago my friend have bought a tablet Moonse N730 on CPU Allwinner A10.Sorry, I can't give you a link. Everything was ok, to the first battery discharge. After charging, she wanted to switch on the tablet. Screen lights up, but after few seconds device get frozen. My first thought was - factory reset will help. Unfortunately, there appeared the first problem. Chinese language in recovery mode. Somehow, someway I've done the reset after several attempts. But it doesn't fix problem. I mean device worked ok to the next discharged and then same story again.
My conclusion is - it need a new OS.
I've been tried few Android versions already, but always something wasn't good. Ones camera didn't work. Second time - touch screen. Right now when you trying turn camera on device is rebooting.
I have found on forum few topics from the past (2 years ago) but there was nothing useful.
If anyone can help me I'll appreciate it. Thanks.
P.S. Sorry about my poor English
Hello, all! I recently got a brand new Samsung Galaxy S7 Edge AT&T Model (SM-935A) from Best Buy, and I somehow decided to root it (Me being an iPhone user, I don't know anything about Android). Anyway, I ended up rooting the phone, and later, a Samsung Update popped up. Right after I denied it, my main apps (Caller ID Name, and Google Play Store) began to crash and fail to start up at all. Nothing was working as all apps were crashing. When I pushed restart on the phone, it booted through the 'custom' logo, then to the AT&T logo, where it stayed like that for hours. I noticed how hot the phone turned and put it in the refrigerator (After all, the phone is waterproof, right? ;_. I searched on the internet, and there I found that I could full-wipe the phone out, which seemed reasonable to me, as I had not completely decked out the phone, yet. So after full-resetting the phone, I still saw the 'custom' logo, and all of my content was gone. As usual, I downloaded, and put back all of my accounts, and soon enough, another update came round, and my phone broke down... Again. So I repeated that step of wiping out my phone again. This happened about 3 more times until I decided to flash-fix my phone, or something akin to that term. I downloaded the required files of ODIN and software from this website, but instead, it still failed with the 'ODIN protocol version failed!' error. I do not understand this issue nor do I know how to fix it. I hear that XDA is the world's best developers at Android or something so I have come here as a FINAL RESORT! Thank you for reading, and to whoever may know, please help! (If you need pictures, I will be happy to post them!)
Hi I downloaded the official mi flash tool, but I got an error when I tried to install the driver.
Error/ unhandled exception has occurred in your application.
So I looked for a solution and found a video on YouTube, if you add a folder with the name log it will install, mines didn't, it came up with some Chinese text, and a box underneath with the word OK, naturally I clicked on OK but nothing happened, have I missed something any help would be appreciated, Thanks.
Stevie said:
Hi I downloaded the official mi flash tool, but I got an error when I tried to install the driver.
Error/ unhandled exception has occurred in your application.
So I looked for a solution and found a video on YouTube, if you add a folder with the name log it will install, mines didn't, it came up with some Chinese text, and a box underneath with the word OK, naturally I clicked on OK but nothing happened, have I missed something any help would be appreciated, Thanks.
Click to expand...
Click to collapse
I don't actually understand what you trying to do.
Check my POCO F1 Ultimate Collection & Guides.
Retrial said:
I don't actually understand what you trying to do.
Check my POCO F1 Ultimate Collection & Guides.
Hi my pocophone f1 motherboard packed in, so I got a replacement from aliexpress, I got someone to fit it for me, the reviews for the board I got were quite good, the only complaint was the front facing camera, was not working, I later on learned that the operating system had developed a bug, and Xiaomi were trying to fix it I hope my information is correct maybe you can clear this up?
So I was keeping in touch by text, with the guy fitting my new motherboard, and he said all was going well and the phone was updating, about 20 mins later he mentioned the problem with the camera, I replied that I had already read something about it, so he told me he had firmware to fix it, two days later he told me the phone was ready come pick it up, I asked if everything was all good he said yes, however he then proceeded to tell me that the phone wasn't booting properly and the only way to boot it up was to hold down the power key, and volume down at the same time, my first thought was I won't turn it off much, however then he said when it was booted the screen was constantly on, however he said i think you've been unlucky and got a bad motherboard and he would keep his eye out to get me a better one, so i payed him and took the phone.
Later that night something else really annoying was happening, the volume button would not stay up, and sure enough the screen was constantly on, which i thought i could live with, but it started to bug me and to get the volume working properly i had to hold the power button to turn it off, but there was no option for a reboot, or shut down, and when I turned it on it went straight to fastboot, for two days I sent complaints to aliexpress but I got nowhere, they said it was fully tested and my installation must have been wrong I totally disagreed.
However the more I thought about it, I was thinking that maybe something did go wrong when the guy was installing the firmware but I trusted him, and he had been helpful and I thought he was being truthful, so that's why I'm trying to reflash it now in the Hope it can maybe fix the problem, cause I feel I've nothing to lose now as the phone is pretty much useless stuck in fastboot, and for me to boot it I have to mess with the power and volume, and sometimes it boots in safe mode as well really annoying, can you help please is there a fix?
Click to expand...
Click to collapse
@Stevie if you want to install the stock ROM again from scratch, check my guide "Clean Install Official Stock ROM".
If that doesn't help, maybe u got a bad motherboard as you said or the guy didn't changed it correctly.
Retrial said:
@Stevie if you want to install the stock ROM again from scratch, check my guide "Clean Install Official Stock ROM".
If that doesn't help, maybe u got a bad motherboard as you said or the guy didn't changed it correctly.
Click to expand...
Click to collapse
Thanks I'll give it a try, I also read somewhere that it has to have the (Qualcomm Adreno 630 GPU), or else it won't flash properly, they said the boards are original, but just wondering if maybe they had a cheaper GPU or something, but I'm second guessing because the buyer I bought from had decent reviews and people got their phones working again.