[Q] How to flash KA02 SSpeed rom to Sola - Sony Xperia P, U, Sola, Go

Can someone post step by step tutorial how to flash SSpeed rom to Xperia Sola via fastboot.
I dont understand where to but the zip file? What comman to write in CMD and so on
HELP needed!

just put the zip file on your sd card, boot into recovery, select instal zip frim sd card, navigate to your zip file, select it, tap install it!, then the aroma installer will guide you trough the process
Sent from my LT26i using xda app-developers app

JoelChrist_ said:
just put the zip file on your sd card, boot into recovery, select instal zip frim sd card, navigate to your zip file, select it, tap install it!, then the aroma installer will guide you trough the process
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
??? there is no recovery (CWM) for the Sola!
stalvekio said:
Can someone post step by step tutorial how to flash SSpeed rom to Xperia Sola via fastboot.
I dont understand where to but the zip file? What comman to write in CMD and so on
HELP needed!
Click to expand...
Click to collapse
Everthing you need is here ;-)
http://forum.xda-developers.com/showthread.php?t=1526866

I have managed to flash the kernel and the SSpeed ROM. But now its often rebooting and my internal memrory is some how 100% full (.
What next?

Related

[SOLVED] Can anyone please explain this ROM?

I have problems in installing part of **FeraLab*** ICS v1 heres the thread http://forum.xda-developers.com/showpost.php?p=25331067&postcount=2452
Please help...
i did was:
-flash the kernel *done
-go to CWM 5.5 and format all partitions and mount all partitions...install it and reboot ***problem part..
-Installing ROM **not done
-Reboot and done **not done
the problem part is what id dont know how to do...its messed up.. or something.. please help
did the rom download properly. check again if its downloaded fully.
Yes it downloaded fully.. I dont know why it does not show up in CMW?
When I check the downloaded fule its a .tar not a .zip.. I tried to get to zip but it just takes erroe
Sent from my X10S using my hand
Gooperz06 said:
Yes it downloaded fully.. I dont know why it does not show up in CMW?
When I check the downloaded fule its a .tar not a .zip.. I tried to get to zip but it just takes erroe
Sent from my X10S using my hand
Click to expand...
Click to collapse
so the rom doesnt show up in cwm?
make sure the extension is .zip
also check if its inside some folder and not directly in root directory of sdcard
On the computer open up the .tar file and see if the .zip file of the rom is in there the TAR extension is a compressed file which has other files in it
Sent from my X10i using xda premium
dunc4n88 said:
On the computer open up the .tar file and see if the .zip file of the rom is in there the TAR extension is a compressed file which has other files in it
Sent from my X10i using xda premium
Click to expand...
Click to collapse
yeah theres a zip file in there but theres a kernel in the .tar too..
THeLogiC said:
so the rom doesnt show up in cwm?
make sure the extension is .zip
also check if its inside some folder and not directly in root directory of sdcard
Click to expand...
Click to collapse
inside the .tar theres a .zip called update_es209ra_ICS_alpha1_CWM5 and a kernel wich is a SIN file thats it..maybe i need to flash the .zip... and what will i do to tha kernel?
Gooperz06 said:
inside the .tar theres a .zip called update_es209ra_ICS_alpha1_CWM5 and a kernel wich is a SIN file thats it..maybe i need to flash the .zip... and what will i do to tha kernel?
Click to expand...
Click to collapse
you need to flash zip file
THeLogiC said:
you need to flash zip file
Click to expand...
Click to collapse
and what will i do to the kernel.sin?
ignore that.
just flash ferakernel
boot into cwm and install the zip file.
THeLogiC said:
ignore that.
just flash ferakernel
boot into cwm and install the zip file.
Click to expand...
Click to collapse
ok..tnx again for ur continues help...
will my current ROM will affect the new ROM... my current is X10S ROM
Gooperz06 said:
will my current ROM will affect the new ROM... my current is X10S ROM
Click to expand...
Click to collapse
not really.
make sure to wipe data before installing feraICS

[Q] How To Root Samsung Galaxy Ace II (2) i8160P ?

i need to root my phone cuz i cant use it almost not at all .. like Storage using is very impossible with the system applications , the phone came with .. so Please someone help me ??
once again Model is : GT-i8160P ...
I have the same problem here
I have I8160p that i need to root because it seems the only way to unlock it.
How to root this phone ????
1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Downloads:
CWM Custom Recovery (Choose either Touch Recovery or Recovery for your device.):
http://clockworkmod.com/rommanager
SU Installer:
http://www.mediafire.com/?0r9dx4t1utvvuj0
SU Uninstaller:
http://www.mediafire.com/?c469p1nu64e92gf
Be sure to click dat THANKS button if I helped!
Sent from my GT-I9100 using xda premium
i8160P successfully rooted
thanks allot dude i own u big time ..
Didnt worked for me
Hey There,
first: thanks for the Tut.
It seems that it doesn't work on my Mobile. I also have Android 4.1 (via Kies) ans followed your HowTo. Unfortunatley I didn't found any Clockwork Mod For the Android 4 Version.. May you specify your Tutorial?
Cheers
Ghost
ronny927 said:
1.dowoad the file from the link below.
2. Then download clockwork mod custom recovery.
3. Then boot into recovery mode, and choose "install from sd card".
4. Choose clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from sd card and choose su installer.zip.
Note:to unroot just flash su uninstaller.zip the same way you did to flash installer.zip.
Downloads:
Cwm custom recovery (choose either touch recovery or recovery for your device.):
http://clockworkmod.com/rommanager
su installer:
http://www.mediafire.com/?0r9dx4t1utvvuj0
su uninstaller:
http://www.mediafire.com/?c469p1nu64e92gf
be sure to click dat thanks button if i helped!
Sent from my gt-i9100 using xda premium
Click to expand...
Click to collapse
i updated my phone to jelly bean .
im gonna need the files for jelly bean XXME1 (german) i8160p NFC brah'???
First some infos about rooting. For rooting you only need a superuser app and its binary. In most of the time it is SuperSU. Here is a introfuction for I8160 witch works perfect. It should also work on I8160P because for rooting you only need the superuser.
Download the file here: rooting File
How to :
1. Download the zip and place it on your SD Card.
PS : SD Card is a must.
2. Reboot to the stock recovery.
3. Select install update from external storage.
4. Select the root.zip file.
5. Voila
Enjoy your rooted JB.
Hope i could help you
Sent from my GT-I8160 using xda premium
thnx brah I will try it .. den let u know ..
yesss it works just fine .. now if u could help me with vold fstab jelly bean xxme1 please
thanks athousand times
made.believe said:
yesss it works just fine .. now if u could help me with vold fstab jelly bean xxme1 please
thanks athousand times
Click to expand...
Click to collapse
I will take a look. Maybe i can help you
Sent from my GT-I8160 using xda premium
thnx
Here is an Link for vold.fstab. it contains original and modified one. Pls try it. And set right permissions!
it works nice man .. thnx alot ...
Do you have any other question?
Sent from my GT-I8160 using xda premium
actually i do , most games lagy after jb update ...
made.believe said:
actually i do , most games lagy after jb update ...
Click to expand...
Click to collapse
Thats because of jb. There you cant do anything. Maybe supercharger will change a little bit
Sent from my GT-I8160 using xda premium
how can I get supercharger
made.believe said:
how can I get supercharger
Click to expand...
Click to collapse
You can also see full tutorial HERE
or
simplified tutorial HERE !
Sent from my GT-I8160 using xda premium
cant download zips
for some reason my phone the galaxy ace 2 has stopped downloading zips frim the internet or anywhere for that fact does anybody know what could be causeing this

[Q] How to update CWM on tablet

Hi
I just bought a second hand nook tablet and it was flashed the CM10.2, I'm preparing to flash CM11 on it, but it seems the recovery is a bit older.
I download the latest recovery.img from this post http://forum.xda-developers.com/showthread.php?t=2585175.
But I've no idea about how to update the recovery, could anyone give some help? Thanks in advance.
See http://forum.xda-developers.com/showpost.php?p=47680141&postcount=2.
Oops.
droople said:
Hi
I just bought a second hand nook tablet and it was flashed the CM10.2, I'm preparing to flash CM11 on it, but it seems the recovery is a bit older.
I download the latest recovery.img from this post http://forum.xda-developers.com/showthread.php?t=2585175.
But I've no idea about how to update the recovery, could anyone give some help? Thanks in advance.
Click to expand...
Click to collapse
download the zip file i provided in that same thread u showed. its the second post. not the recovery.img. do the img file only if u know wut ur doing. put the zip i gave into a sd card. reboot into cyanoboot. open internal recovery. choose zip from sd card. choose the zip file i gave u. which means flashing it......reboot into cyanoboot. open internal recovery and now u have the newest cwm....lmk if u are confused.
newbtrigger69 said:
download the zip file i provided in that same thread u showed. its the second post. not the recovery.img. do the img file only if u know wut ur doing. put the zip i gave into a sd card. reboot into cyanoboot. open internal recovery. choose zip from sd card. choose the zip file i gave u. which means flashing it......reboot into cyanoboot. open internal recovery and now u have the newest cwm....lmk if u are confused.
Click to expand...
Click to collapse
thank you newbtrigger69
droople said:
thank you newbtrigger69
Click to expand...
Click to collapse
anytime i can help a fellow xda member
and if u can. remember to thank me on the tab
dont want to fall behind on those
<-----------------------------------------------------
How do u update TWRP?
Sent from my SGH-T889 using XDA Premium 4 mobile app
jpelagio11 said:
How do u update TWRP?
Click to expand...
Click to collapse
Here's how:
Download any flashable internal recovery zip file (e.g., flashable_CWM_6.0.2.9.zip from Succulent's repo http://goo.im/devs/succulent/acclaim/recovery).
Use an archive file manager such as 7-zip to delete and replace the recovery.img inside the flashable zip file with your choice of TWRP (internal recovery) file from http://techerrata.com/browse/twrp2/acclaim (e.g., openrecovery-twrp-2.6.3.1-acclaim.img); remember to rename the downloaded TWRP .img file to recovery.img before inserting it into the zip file.
Flash the resulting flashable recovery zip file using current EMMC recovery or SD-based recovery.

Someone who helps me with the installation of cyanogenmode 11 in my xperia p?

Hi,can someone explain step by step method to install this ROM? I also would like to know what version of recovery you advise me to install. Thanks to all
Sent from my ME173X using xda app-developers app
hello frnd!!
steps
1. download cm11 and open d zip n find boot.img file n place it somewer on d desktop and copy d cm11 downloaded zip to phone storage.
2.now open flashtool and press d flash button and select fastboot and browse for boot.img file in d desktop(change file type to .img in the bottom right corner) den only u wil be able to see d boot.img file) and flash
3.now power on phone n go inside cwm recovery and delete data,cache,dalvik and also go into mounts and storage and format system.
4.now select cm11 zip n flash in cwm.
----------------------press thanks if it helped------------------------------

[Q] Replace recovery.img with cwm recovery

This is my first time trying to root my Micromax Canvas HD.
I am trying to install CWM recovery using this http://forum.xda-developers.com/showthread.php?t=2167621
However I am stuck in the second step itself. I have extracted the "Kernel Source" SouceCode(IQ451_4.1).zip file. But I am not able to find any recovery.img file to replace. What is the problem here? Have I downloaded the wrong file? Should I download something else?
While trying to extract the zip file, Winrar asked me if I want to rename the duplicate files, because there were a few files with the same name but different size. I asked Winrar to rename the files. Is this a problem?
I am completely new to this field, so I am not exactly sure what I am doing wrong.
Any help regarding this problem would be of great help to me. Please tell me of the things that need to be taken care of before rooting my phone.
Thanks a lot.
sudhingr8 said:
This is my first time trying to root my Micromax Canvas HD.
I am trying to install CWM recovery using this http://forum.xda-developers.com/showthread.php?t=2167621
However I am stuck in the second step itself. I have extracted the "Kernel Source" SouceCode(IQ451_4.1).zip file. But I am not able to find any recovery.img file to replace. What is the problem here? Have I downloaded the wrong file? Should I download something else?
While trying to extract the zip file, Winrar asked me if I want to rename the duplicate files, because there were a few files with the same name but different size. I asked Winrar to rename the files. Is this a problem?
I am completely new to this field, so I am not exactly sure what I am doing wrong.
Any help regarding this problem would be of great help to me. Please tell me of the things that need to be taken care of before rooting my phone.
Thanks a lot.
Click to expand...
Click to collapse
Use mobile uncle tools instead of the above method.. Download recovery... Rename it to recovery.img... Place it in sd card... Not in any folder.. Just inside sd card.. Open mobile uncle tools... Update recovery.. It automatically detects the file in sd card... Select... Flash...reboot.. Done...
Hit thanks if this helped..
Sent from my Nexus 4 using XDA Premium 4 mobile app
$hino said:
Use mobile uncle tools instead of the above method.. Download recovery... Rename it to recovery.img... Place it in sd card... Not in any folder.. Just inside sd card.. Open mobile uncle tools... Update recovery.. It automatically detects the file in sd card... Select... Flash...reboot.. Done...
Hit thanks if this helped..
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is there no other solution? Will I be able to use the files that I have already downloaded?
I have tried loading the recovery.img file through the Flash tool, but it asks me to select the path for the PRELOADER..
How do I find the preloader file?
You can use the downloaded file... Why do you want to use the flash tools method when the thing can be done in 2 clicks..
Sent from my Nexus 4 using XDA Premium 4 mobile app
just use Framaroot app and then Rashr app
sudhingr8 said:
Is there no other solution? Will I be able to use the files that I have already downloaded?
I have tried loading the recovery.img file through the Flash tool, but it asks me to select the path for the PRELOADER..
How do I find the preloader file?
Click to expand...
Click to collapse
U need to root chd to install custom recovery. To do so download framaroot app from framaroot.net . Then to install custom recovery just use Rashr (search it in google play)

Categories

Resources