Related
Hi,
I've been searching through posts for help. But I might have run into a combination of bad luck and noobness, and I can't perform any suggested recovery procedure that I've found smoothly. If you think my problem can be solve by another answered post please link.
My phone was rooted (from the HTCDev tool) and sim unlocked. This morning I started the Update pushed from HTC (that should be the ICS update???). The update last more than 40 minutes (I wasn't watching) and stuck on the HTC boot screen. I thought it's problem hanged, unplugged the battery (maybe I noobed out here? shouldn've waited 4 hours? or do a hard reset instead?).
Anyway, from that point onward it's hang on boot.
I boot it up the the hboot menu. Go to recovery, tried wiping the cache, tried the factory reset. No luck.
Here is what I have on HBOOT
*** UNLOCKED ***
SHOOTER_U PVT SHIP S-ON RL
HBOOT_1.49.0008
eMMC-boot
Jul 15 2011, 14:39:25
When I tried to run the "update from SD card" in the recovery mode I always get the
E:can't open /cache/recovery/command
no matter what I've put in the SD card
When I try to use 4EXTRecovery, it always says error: device not found
I also tried to use revolutionary to turn S-OFF but it always stuck on waiting for device
the fastboot command line from HTC Dev however, can talk to the phone slightly...
fastboot devices
HT17WV302432 fastboot
fastboot oem unlock
...
(bootloader) [ERR] Command error !!!
fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.142s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.007s]
finished. total time: 0.150s
But the phone doesn't turn to the unlock agreement page, phone remains S-ON.
I don't have CWM installed on my phone yet. And I don't know how to get it onto my phone with market place. Putting update.zip in SD card doesn't seem to trigger the phone in any way.
At this point, I think I should?
S-OFF my phone?
See if I can use fastboot to flash any workable ROM / boot / Recovery onto the phone?
Any help would be great.
Thanks a lot.
Gil
If I remember correctly to update to the official OTA you need to put the stock recovery back on your phone and re-lock it.
I don't really care whether it is official OTA or not. I just want to get my phone back to work. Do you have any link to where I can get the OTA and how to do it?
Does it require turning S-OFF? I'm under the impression it is blocking me to do anything. And because my phone is already in a bad state a lot of the tools is not communicating with the phone right now...
No luck with the OTA. I was able to get CWM onto recovery through fastboot, and also tried flashing King Cobra. But the phone still won't be with King Cobra, I'm still on S-ON. Revolutionary still won't connect.
u dont need s-off with 4ext recovery
I had an unlocked EVO3D (htcdev method) and the problem you had happened to me too. The phone stuck at the initial splashscreen and iI had to pull the battery off.
To have my phone back it was enough to use 4ext to restore a saved backup I had
done previously.
If you dont have backups then installing KingCobra (1.5, I have issues with 1.6) should be enough to solve. Copy the rom to the sdcard and then install it via 4EXT.
If you want to go S-OFF i recommend to use the wire-trick method
unlimited.io/juopunutbear-public-beta-0-1/instructions
It's tricky indeed but works very well.
kernBeros said:
I had an unlocked EVO3D (htcdev method) and the problem you had happened to me too. The phone stuck at the initial splashscreen and iI had to pull the battery off.
To have my phone back it was enough to use 4ext to restore a saved backup I had
done previously.
If you dont have backups then installing KingCobra (1.5, I have issues with 1.6) should be enough to solve. Copy the rom to the sdcard and then install it via 4EXT.
If you want to go S-OFF i recommend to use the wire-trick method
unlimited.io/juopunutbear-public-beta-0-1/instructions
It's tricky indeed but works very well.
Click to expand...
Click to collapse
How do you get 4EXT onto the phone? Is there anyway to flash it to recovery? Or do you already have it flashed before? I was trying to find a 4EXT recovery flash but no luck.
I tried using CWM flashed to the recovery and installed King Cobra, it installed but still doesn't boot up. I also tried flashing boot.img onto boot (by using fastboot) but the phone still doesn't boot up. The firmware (PG86IMG.zip) wouldn't flash tho, so maybe I need either S-OFF or 4EXT to do that.
Thanks.
gyt2wong said:
How do you get 4EXT onto the phone? Is there anyway to flash it to recovery? Or do you already have it flashed before? I was trying to find a 4EXT recovery flash but no luck.
I tried using CWM flashed to the recovery and installed King Cobra, it installed but still doesn't boot up. I also tried flashing boot.img onto boot (by using fastboot) but the phone still doesn't boot up. The fireware (PG86IMG.zip) would flash tho, so maybe I need either S-OFF or 4EXT to do that.
Thanks.
Click to expand...
Click to collapse
=================================================================================
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU BRICK / RUIN YOUR PHONE IN ANY WAY.
=================================================================================
4Ext was already flashed. However what you did should be ok. Are you sure that the boot.img that you flashed is the correct one for the ROM that you installed?
The boot.img on the KingCobra main page belongs to the 1.6 version.
You can extract the correct one for the 1.5 version from the ROM zip file.
The path in the zip file is Custom/Kernels/Stock/boot.img
I used the 1.5 version with the original radio without problems.
Fixed this by:
1) Getting the official RUU on ICS.
2) Connect USB in HBOOT
3) Use fastboot to relock the bootloader
4) Run RUU on Windows and successfully flashed everything
So seems like S-ON pluse unlocked bootloader means no no to both official rom and custom rom.
First of all i've been searching for a way to fix this for hours now without a solution.
My problem is as follows:
i installed official miui beta and got stuck with a boot loop, i was running 4text recovery but i wanted to try something different so i flashed twrp recovery in fastboot. however whenever i try to go into recovery now it just reboots and goes into boot loop again, so i cannot access recovery or boot into my rom.
I have tried flashing several recoverys via fastboot but each time it just reboots and does not enter recovery.
i have also tried rebooting into recovery using fastboot reboot recovery and adb reboot recovery but still it didn't work.
i have flashed another boot.img but now it just gets stuck on miui screen instead of boot loop
is there any way i can get any recoverys to work? i have tried looking for a 4text recovery.img as 4text was the last recovery to work but i can only seem to find the app that flashes it.
i have also tried flashing a rom through fastboot by typing fasboot flash zip rom.zip but it just says failure.
i am now downloading RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_radio_11.77.3504.00U_11.25.3504. and am going to try rename it to PG86IMG and update through bootloader after relocking it and then unlocking it again but i am not sure that will work.
in short i flashed a new recovery but it just reboots device when i try and enter it and the rom i am on happens to be stuck on boot loop so i cannot get in rom or recovery and flashing a new recovery does not work.
BTW i am S-ON HBOOT-1.49.0018
sorry for the lengthy post and also any grammatical errors as i am tired
Comments withdrawn
zcink said:
The whole problem, which is always the problem is you are S-ON. The MIUI rom will NOT run unless you install the newest firmware. You cannot install the newest firmware with S-ON because it is locked up in a partition that you cannot access unless you go s-off.
Has nothing to do with the recovery. I've been using 4ext recovery pretty much the whole time I've owned my EVO 3d and never had one single problem with it.
There are roms you can run with s-on but not the MIUI one.
Click to expand...
Click to collapse
cool, didn't know that, my problem now then is how can i reflash a different rom, bearing in mind that i cannot access recovery? do you think putting the pg86img stock ruu thingy on my sd and letting bootloader install that will work?
powellyable said:
cool, didn't know that, my problem now then is how can i reflash a different rom, bearing in mind that i cannot access recovery? do you think putting the pg86img stock ruu thingy on my sd and letting bootloader install that will work?
Click to expand...
Click to collapse
I do believe that if you are s-on, you should be able to relock the phone and then run the rru from your computer.
sonza said:
I do believe that if you are s-on, you should be able to relock the phone and then run the rru from your computer.
Click to expand...
Click to collapse
My next step was to relock it and run the ruu through bootloader, can you do it through computer/fastboot?
Sorry, I haven't been on the forum for a while.
Read the following link,
http://forum.xda-developers.com/showthread.php?t=1194053&highlight=relock
It should help you with the process.
The rru file you have should be an executable file that the name ends with "signed.exe" if memory serves. I do believe you can run this from your windows desktop if you are using windows. The link above has the adb command to use to relock the phone.
Once you are up and running again, you can install an ics rom even if you have s-on. I am running one but there are a few steps you need to do in the correct order so you don't end up where you are.
Good luck and have a great weekend!
Here is another good link to do what you are wanting to do.
http://forum.xda-developers.com/showthread.php?t=1578977
This might be even easier for you.
Comments withdrawn
i was previously running Meanrom 6.4 rooted S-ON and i decided to S-OFF my phone
i have RUU my phone and unlock the bootloader through dirtyracun s-off but when i was about to run the final step which is RabiesShot.exe(to S-OFF), my laptop have barely any battery left so i decided to not do that for the time being.
after that, I am still running the RUU 2.13.651.1 - HBOOT 1.19 without Root or any mods.
I decided to flash the "PJ75IMG - Stock Kernel". i renamed it to PJ75IMG and put it on my sdcard and it did successfully flash.
the problem is that my phone wont boot past Sprint Logo(it would suddenly black screen of death).
also, since i have no way of removing the PJ75IMG on the SD card, everytime i try to access recovery, it automatically tries to flash that file then it would exit and reboot automatically.
the only way for me to skip that part is to remove the sdcard.
my TWRP is also gone so i cannot flash any roms.
i have no card reader so i cannot place any stuff on my micro sd. :crying:
i though about downgrading the kernel to the previous working version through fastboot but when i looked for the files, they say downgrading would result in a brick.
is there any way i can maybe fastboot jellybean or ics or the kernel to make my phone work again?
edit:
if i did flash the Jellybean with my current kernel, is there a way to achieve S-OFF?
i also havent found stock jellybean rom that isnt rooted
Just...
raclimja said:
i was previously running Meanrom 6.4 rooted S-ON and i decided to S-OFF my phone
i have RUU my phone and unlock the bootloader through dirtyracun s-off but when i was about to run the final step which is RabiesShot.exe(to S-OFF), my laptop have barely any battery left so i decided to not do that for the time being.
after that, I am still running the RUU 2.13.651.1 - HBOOT 1.19 without Root or any mods.
I decided to flash the "PJ75IMG - Stock Kernel". i renamed it to PJ75IMG and put it on my sdcard and it did successfully flash.
the problem is that my phone wont boot past Sprint Logo(it would suddenly black screen of death).
also, since i have no way of removing the PJ75IMG on the SD card, everytime i try to access recovery, it automatically tries to flash that file then it would exit and reboot automatically.
the only way for me to skip that part is to remove the sdcard.
my TWRP is also gone so i cannot flash any roms.
i have no card reader so i cannot place any stuff on my micro sd. :crying:
i though about downgrading the kernel to the previous working version through fastboot but when i looked for the files, they say downgrading would result in a brick.
is there any way i can maybe fastboot jellybean or ics or the kernel to make my phone work again?
edit:
if i did flash the Jellybean with my current kernel, is there a way to achieve S-OFF?
i also havent found stock jellybean rom that isnt rooted
Click to expand...
Click to collapse
If i were you, i would go back through the s-off process if you can, that will get you back to stock and s-off, then install latest twrp, and then instal OMJ's custom release of the new JB update, it will give you root and the new update, Install the radios since you are s-off and you are good to go.
You need to finish that last step to gain s-off though lol. You should have waited.
Also, im not sure if that is just the kernel, but if it is, just the kernel and nothing else. Then you should be able to do s-off fine still.
Someone correct me if im wrong, i just learned this whole s-off process today so i could do the update.
igotlostintampa said:
If i were you, i would go back through the s-off process if you can, that will get you back to stock and s-off, then install latest twrp, and then instal OMJ's custom release of the new JB update, it will give you root and the new update, Install the radios since you are s-off and you are good to go.
You need to finish that last step to gain s-off though lol. You should have waited.
Also, im not sure if that is just the kernel, but if it is, just the kernel and nothing else. Then you should be able to do s-off fine still.
Someone correct me if im wrong, i just learned this whole s-off process today so i could do the update.
Click to expand...
Click to collapse
the thing is the phone wont even boot past the HTC Logo then it would display black screen of death
edit: i found through google saying the error is rekated to the kernel version and i should downgrade first.
is there any safe/reliable method of downgrading the latest kernel from ota (i did not flash the one with the latest hboot but i am still s-on)
i tried to Fastboot RUU but i got an error saying FAILED (remote: 43 main version check fail)
Fix boot loop after jellybean firmware update via bootloader
raclimja said:
the thing is the phone wont even boot past the HTC Logo then it would display black screen of death
edit: i found through google saying the error is rekated to the kernel version and i should downgrade first.
is there any safe/reliable method of downgrading the latest kernel from ota (i did not flash the one with the latest hboot but i am still s-on)
i tried to Fastboot RUU but i got an error saying FAILED (remote: 43 main version check fail)
Click to expand...
Click to collapse
I had the same problem.
1.remove the PJ75IMG file from exrtenal sd card.
2.reboot to fastboot pres factory reset
3. immidietly press and hold volume down, this should get you to recovery.
4. wipe
5. restore a backup rom
6.reboot
It worked for me after hours of trying other methods.
I just went through a bootloop mess. What i did to get my phone back was to use fastboot and use commands (on my pc) like
fastboot flash recovery recovery.img (for TWRP)
fastboot flash boot boot.img (for Kernel)
That got my phone back up and working.
Have you tried this?
raclimja said:
the thing is the phone wont even boot past the HTC Logo then it would display black screen of death
edit: i found through google saying the error is rekated to the kernel version and i should downgrade first.
is there any safe/reliable method of downgrading the latest kernel from ota (i did not flash the one with the latest hboot but i am still s-on)
i tried to Fastboot RUU but i got an error saying FAILED (remote: 43 main version check fail)
Click to expand...
Click to collapse
ok i believe, fastboot should get you twrp. As will it get you the boot flash.
Fastboot flash zip (latest twrp)
Fastboot flash boot (ICS sense rom's boot.img extracted from zip) (this will get you the kernel)
Reboot hold vol down and power to get to bootloader
select recovery
Twrp wipe and flash ICS rom you got the boot img from. (this will take a bit because it wont install kernel, but you already have it from step 2)
you should boot into the rom. then re-do Dirty Raccoon installation, go all the way through, and you should now be s-off
re-install twrp
Flash radios in bootloader (fastboot flash zip (.zip for radios) (link one from Original android development jelly bean flashables post) (optional)
Go to twrp, factory reset, wipe cache, wipe dalvic, wipe syste.
Twrp Flash OMJ's custom JB release of this update, or stock with goodies, or jewel-swag.
Wipe cache/Dalvic
reboot.
I think this should work but i would immagine you've tried it already. Im running the new kernel and am experiencing no problems with it.
If you're s-off just use fastboot to flash a new kernel, no need to do a factory reset or anything else.
The kernel and ROM must be installed as a pair, just upgrading one isn't going to work.
[FIX] & [DOWNGRADE HBOOT] - Stupid Bootloop with HBOOT 1.58 EVO 3D - UPDATED 1-7-13
My friend's phone had the annoying bootloop problem. I'm posting this because after a lot of searching, I found nothing to fix the bootloop, just people asking about it. Here's a simply fix.
BOOTLOOP FIX:
If you already tried unlocking/ and you're still S-On, then set everything back to stock:
Flash the attached stock recovery,
fastboot oem lock to be locked again.
Use the latest RUU to update the phone.
At this point the stock, locked phone should function normally.
I have busted this phone a ton of times trying to get different recoveries and roms to work, and this method has always fixed the bootloop.
At this point you can try whatever tutorial you like to downgrade or customize the phone...and if it breaks, hopefully this method will still work for you. If it doesn't work the first time, try running the RUU a second time. Or third.
CUSTOM RECOVERY:
If you want to unlock and install custom stuff:
Use the HTC Dev unlock method.
Fastboot install CWM Recovery v5.8.0.1 from their website -
The ONLY recovery that I've found to be compatible with HBOOT 1.58 is CWM v5.8.0.1. Everything else leaves the phone in an infinite bootloop. Maybe others have had different experiences.
To fastboot install the CWM recovery, rename the file to recovery.img (for simplicity) and type in a command prompt (same directory as fastboot and recovery.img):
fastboot flash recovery recovery.img
Then, to enter into recovery, either pull the battery and enter recovery through the bootloader menu, or type in:
fastboot boot recovery.img
This should get you into the working CWM recovery. If it doesn't, it's because HTC hates people that buy their phones.
If you feel like giving up and running stock, all you need to do is reflash the stock recovery, and relock the phone using fastboot oem lock - and now it should run the stock rom...and if it doesn't, then rerun the RUU. Tedious.
HBOOT Downgrade & S-Off:
If you have: Stock 2.89 RUU / Locked / S-On
Unlocked with HTC Dev method
Flash CWM 5.8.0.1 from the CWM website:
fastboot flash recovery recovery.img - then
fastboot boot recovery.img (to enter recovery)
Flash the SetMainVersionLOW.zip file attached (thanks ramjet73)
Relock the phone with: fastboot oem lock
Use the Unknownforce/closeone hboot downgrade with live CD using the 2.89 RUU's rom.zip (from windows temp folder) renamed to PG86IMG.zip - go to the Unknownforce/closeone thread for this part: http://forum.xda-developers.com/showthread.php?t=1563342
Then flash the standard 1.13 RUU on your windows system (may also work with the PG86IMG.zip method, have not tested)
Then use revolutionary 0.4pre4 to S-Off
Finally, you need to flash a custom recovery which you can do from revolutionary, or from fastboot as listed above. Once the recovery is installed, you should be able to install a compatible custom rom and kernel.
You bootloader screen should now say REVOLUTIONARY on top instead of UNLOCKED or RELOCKED etc... and show HBOOT 1.40.1100.
Thanks to Unkownforce, closeone, and ramjet73 for making this possible.
PS. Screw up your phone at your own risk.
In case anybody was wondering, the RUU I've been using is the latest one at the time of this post: RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe
If by "reset s-on" you mean to switch s-off to s-on using the "write secureflag 3" command, then there is no need to do that., you can directly run RUU.exe on S-OFF and any recovery (hboot needs to be one of the stock versions I guess, I dont know for sure).
And I dont know if theres any relation with hboot version and recovery but TWRP and 4ext recovery works for every hboot. And if you are s-on, you dont always have to flash boot.img seperately using fastboot if you turn smartflash on.
mnomaanw said:
If by "reset s-on" you mean to switch s-off to s-on using the "write secureflag 3" command, then there is no need to do that., you can directly run RUU.exe on S-OFF and any recovery (hboot needs to one of the stock versions, I dont know for sure).
And I dont know if theres any relation with hboot version and recovery but TWRP and 4ext recovery works for every hboot. And if you are s-on, you dont always have to flash boot.img seperately using fastboot if you turn smartflash on.
Click to expand...
Click to collapse
Yeah, don't ever do the write secure flag command. That's bad news. Running a ruu will not s- on, and you're better staying s-off
Sent from my PG86100 using xda app-developers app
Reset s-on, and
fastboot oem lock to be locked again.
Click to expand...
Click to collapse
As others have mentioned, this is completely unnecessary. Once you're s-off htc's unlock is a non-issue and you can run any RUU you wish to at any time.
I know of no reason whatsoever where someone would need to set S-ON once it's off.
xHausx said:
As others have mentioned, this is completely unnecessary. Once you're s-off htc's unlock is a non-issue and you can run any RUU you wish to at any time.
I know of no reason whatsoever where someone would need to set S-ON once it's off.
Click to expand...
Click to collapse
@xHausX
Totally agree. The only reason to set S-ON once S-OFF is achieved is to return to 100% stock for warranty service or to sell the phone.
Nice to see you in these parts again and Happy New Year!
@joshdv
The CWM recovery version (6.0.1.4) you attached to the OP gives an error about accessing mmcblk0p34 when used with the engineering (ENG) bootloader, which a lot of Evo 3D users have installed to run GB or AOSP based ROM's. The current version of TWRP2 (2.3.3.0) has a similar error about the misc partition and I don't know if those errors will affect anything else or not. Apparently those errors are caused by variations in the emmc partition layouts with different bootloaders.
I prefer to use 4EXT which doesn't show any errors once cache+dalvik are formatted.
ramjet73
I updated the OP. I read somewhere else that it was necessary, this phone was never S-Off, so I wasn't sure.
Thanks
Everytime i run the ruu for my 3d it will finish as it has completed and boot. But whenever i remove my battery to switch it with a secondary, i used to do this before bed every night, i get a bootloop and cant boot untill i boot into bootloader and select the recovery option which wipes the phone and boots untill then next time i remove the battery. Why wont the RUU fix this? ive ran it multiple times. And also whenever im in the stock recovery and i select factory reset or any of the options i get "invalid option" "sucess rebooting by reason oem-00" what does this mean!?! can this be my sd? cause i cant mount cache recovery command or mount anything in recovery for that matter. if i need an sd ill buy one. just dont wanna find out its not my sd. and ive run the RUU about 7 times in total and nothing helps. thanks
ramjet73 said:
@joshdv
The CWM recovery version (6.0.1.4) you attached to the OP gives an error about accessing mmcblk0p34 when used with the engineering (ENG) bootloader, which a lot of Evo 3D users have installed to run GB or AOSP based ROM's. The current version of TWRP2 (2.3.3.0) has a similar error about the misc partition and I don't know if those errors will affect anything else or not. Apparently those errors are caused by variations in the emmc partition layouts with different bootloaders.
I prefer to use 4EXT which doesn't show any errors once cache+dalvik are formatted.
ramjet73
Click to expand...
Click to collapse
Yeah, I put WIP because it still never worked right, it was just the only one that ever actually loaded. I still hate this phone, I wish HTC was as nice as Samsung. It's so easy to work with Samsung, I always get mad trying to work around HTC's crippling B.S. Still better than Motorola though.
bootloop in my Htc Evo 3D hboot 1.53.007
How do you flash the stock recovery?
jcthelight said:
How do you flash the stock recovery?
Click to expand...
Click to collapse
put your phone into the bootloader by holding the volume down key while turning it on.
Assuming you have the sdk tools, or some basic set like QADERSO.zip:
select fastboot from the bootloader menu, then connect it to your computer with a usb cable (should change to fastboot usb)
in a command prompt (or terminal window, depending on your OS)
Go into the folder containing both fastboot and the recovery.
Type in: fastboot flash recovery recovery.img (rename the stock recovery included in the OP to just recovery.img)
Once that is complete, you will have the stock recovery.
joshdv said:
put your phone into the bootloader by holding the volume down key while turning it on.
Assuming you have the sdk tools, or some basic set like QADERSO.zip:
select fastboot from the bootloader menu, then connect it to your computer with a usb cable (should change to fastboot usb)
in a command prompt (or terminal window, depending on your OS)
Go into the folder containing both fastboot and the recovery.
Type in: fastboot flash recovery recovery.img (rename the stock recovery included in the OP to just recovery.img)
Once that is complete, you will have the stock recovery.
Click to expand...
Click to collapse
i have hboot 1.53 with s-on stuck on bootloop and i did as u said i flashed stocked recovery from temp folder from ruu-ics-35-ara.exe still my phone is in boot loop. Even i tried oem lock and run ruu.exe file upto 65% process goes fine then suddenly shows 100% process complete and reboot device(still stuck on bootloop).... plz give me suggestion to get rid of this thing.....
"RUU_SHOOTER_U_ICS_35_S_HTC_ARA_3.28.415.2_Radio_11.77.3504.00U_11.25.3504.06_M_release_264795_signed.exe"
joshdv said:
put your phone into the bootloader by holding the volume down key while turning it on.
Assuming you have the sdk tools, or some basic set like QADERSO.zip:
select fastboot from the bootloader menu, then connect it to your computer with a usb cable (should change to fastboot usb)
in a command prompt (or terminal window, depending on your OS)
Go into the folder containing both fastboot and the recovery.
Type in: fastboot flash recovery recovery.img (rename the stock recovery included in the OP to just recovery.img)
Once that is complete, you will have the stock recovery.
Click to expand...
Click to collapse
I'm a little confused. I've never rooted this phone so it's completely stock. My phone keeps powercycling. When I type in "fastboot flash recovery recovery.img" my cmd prompt tells me FAILED (remote: signature verify fail).
Any suggestions?
Re: [FIX] & [DOWNGRADE HBOOT] - Stupid Bootloop with HBOOT 1.58 EVO 3D - UPDATED 1-7-
Dang it! Why does it seem like developers have quit developing fully functioning roms for this phone? I live in a good 4g area so those roms without it are out of the question for me. And the others are having major issues with cameras, video playing, text messaging that keep it from being a daily....
And after using jellybean these ICS roms feel very incomplete even though they're more functional. I know you developers are busy people but please, can ICS get freshened up. Or just ignore me if y'all think the camera/text thing will be resolved very soon.
Sent from my PG86100 using xda premium
SOLVED
Hey, I have htc evo 3d gsm (shooteru). I unlocked the bootloader using htcdev.com and installed clockworkmod recovery. Then I changed cid to HTC__001 and tried to flash a gingerbread ROM in preparation for using the flashmaniac tool to downgrade my hboot (1.53.0007 -> 1.49.0007).
But when I tried to flash the gb rom the recovery said that installation finished but the phone did nothing after reboot. So I took out the battery and went into bootloader and everything looked the same as before the flash attempt. So I tried once again with same result. Then I powered off the phone and now when I turned it on again it only shows the HTC logo for a few seconds and then nothing (the buttons at the bottom have their lights turned on though).
Any ideas?
Yes, hboot version not compatible with gb rom, and or boot partition didn't get flashed. Unlocked but s-on doesn't let boot partition have write if booted into recovery in a normal way.
So yoy can get boot.img from install zip and flash with fastboot
fastboot flash boot boot.img
Or you can reinstall from recovery if booted from fastboot command.
fastboot boot recovery.img
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
jcfunk said:
Yes, hboot version not compatible with gb rom, and or boot partition didn't get flashed. Unlocked but s-on doesn't let boot partition have write if booted into recovery in a normal way.
So yoy can get boot.img from install zip and flash with fastboot
fastboot flash boot boot.img
Or you can reinstall from recovery if booted from fastboot command.
fastboot boot recovery.img
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Click to expand...
Click to collapse
Somehow got it at least to bootloader, no idea how, just tried taking out battery a few times and charging it a bit and it worked.
Thanks for the advice, didn't realize there was a difference between these flashing methods.
randomguyhtc said:
Somehow got it at least to bootloader, no idea how, just tried taking out battery a few times and charging it a bit and it worked.
Thanks for the advice, didn't realize there was a difference between these flashing methods.
Click to expand...
Click to collapse
Power + volume down when turning on will get you into bootloader
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
jcfunk said:
Power + volume down when turning on will get you into bootloader
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Click to expand...
Click to collapse
I know , it just didn't work for some reason before.
So I flashed the boot.img and now it's stuck in a boot loop. Tried going to cwm recovery and wiping various caches etc and flashing again, and flashing boot.img again but it still goes into boot loop.
I would just use the flashmaniac's tool anyway because I don't care about any data on the phone or anything, but it seems that it requires the phone to be booted before it can start the downgrade.
What should I do? Try to flash other roms maybe? The one that I have now is EU_Shooter_U-1.20.401.8_ROOTED.
So I extracted a rom.zip from a RUU but it won't flash from cwm "Can't open /sdcard/rom.zip (bad)", should I try to flash it with adb/fastboot? I'm worried that the zip may be broken (even though archive manager integrity check says its fine).
Would this work with shooteru/GSM?
[TOOL] Ultimate Recovery Tool 3.1 (Unbrick, Downgrade, VM Radio Fix/Reset)
I'm thinking it might be a way to sidestep the boot loop problem that I have now, just relock the bootloader and follow the instructions until I get HBoot 1.40.something like the guy in the video?
Do I need some special drivers when using the RUU executables on Windows?
So I've got it to work. The problem was what jcfunk said (both of the things he mentioned, actually), I was trying to flash a GB rom when I should have tried an ICS rom instead (lol). After going to ICS RUU, I did the wire trick (unlimited.io) and now everything works nicely and I can get the latest roms.
Glad to hear.