As a "proof of concept" I "ported" a firmware from Galaxy S (AOKP). You can experiment with it, just replace the polisblood_Nightly1.img (and preferably replace data.img and cache.img with the original ones from Mike.)
Of course, there's no modem, and SD Card access, all the previous limitations are in place.
Here you are:
http://www.4shared.com/file/CrYasSiT/polishblood_Nightly1.html
you can use the original kernel, or this one:
http://data.hu/get/5299614/zImage (Chose the "Lassú letöltés" button!)
I will not provide support, it's just an example!
Of course all the credits goes to the AOKP team, Slim ICS team, Mike, Rebellos, oleg_k, nbates66, etc.
Update 07.10: disabling the bootanimation in settings resolve the bootloop problem at second boot (thanks m90ultimate!). I'll try to add the google apps to the firmware, but it's 43 MB...)
Update 07.11: new version uploaded (updated the links). Major changes:
- now it works with empty data.img and cache.img
- bootanimation removed (this fixed the bootloop)
- Google apps added (Google Play)
- brightness setting works
- identifies itself as i9000 (Galaxy S)
Update 07.12: uploaded another rom, this one based on Slim ROM For Galaxy S. Here you are:
http://www.4shared.com/zip/WCKtsykT/slim.html
Update 07.26: deeps_17 created some videos about this ROM, you can find them in post 127 It worth checking it out!
Experiment with it!
Update 07.31.2012: I traded my Wave, there will be no more updates from me... Keep up the good work!
I'll leave the topic open, and the download links will stay, of course.
Why this rom boots so slow? i'm waiting about 5 min and nothing, just aokp bgoot screen :/
Could you try it with previously used cache.img and data.img ? Start Mike's ICS, set it up and then change the polishblood_Nightly1.img. Unfortunately I can not check it until tomorrow...
SD card good working?
anghelyi said:
Could you try it with previously used cache.img and data.img ? Start Mike's ICS, set it up and then change the polishblood_Nightly1.img. Unfortunately I can not check it until tomorrow...
Click to expand...
Click to collapse
It worked, but when I reboot phone (turn it off then turn on) same problem...
Hello, I get an error page when I tried to download the first link, can you check it?
mfernandopf said:
Hello, I get an error page when I tried to download the first link, can you check it?
Click to expand...
Click to collapse
Code:
http://dl.dropbox.com/u/27419363/polishblood_Nightly1.img
bootloop
anghelyi said:
As a "proof of concept" I "ported" a firmware from Galaxy S (AOKP). You can experiment with it, just replace the polisblood_Nightly1.img (and preferably replace data.img and cache.img with the original ones from Mike.)
Of course, there's no modem, all the previous limitations are in place.
Here you are:
http://dl.dropbox.com/u/27419363/pol...d_Nightly1.img
you can use the original kernel, or this one:
http://data.hu/get/5299614/zImage (Chose the "Lassú letöltés" button!)
I will not provide support, it's just an example!
Of course all the credits goes to the AOKP team, Mike, Rebellos, oleg_k, nbates66, etc.
Click to expand...
Click to collapse
could you please have a look at this one .
android.sztupy.hu/usbhub.html
usbhost would be much useful since microsd is not working
Thank you
I'm already downloading the file, i will try it...
anghelyi said:
Could you try it with previously used cache.img and data.img ? Start Mike's ICS, set it up and then change the polishblood_Nightly1.img. Unfortunately I can not check it until tomorrow...
Click to expand...
Click to collapse
works like charm.
much smoother and customizable as compared to polishblood aosp.
no FC or hang or lag yet.
i just replaced the older *.img with this newer one and the older cachr data and zimage as it is.
no boot loops .only first boot is longer
Works very fast, but play store don't exist.I Try to install it manually (very complicate without a file explorer) and crash when open.
The second time i try to boot has block in aosp logo.
Sorry for my poor english.
stay on logo
i only replace new polishblood_Nightly with older
please help me
hello
I have instaled de img. but it get stuck on boot logo, sometimes I can get trough, and works very good, stable and fast.
m90ultimate said:
works like charm.
much smoother and customizable as compared to polishblood aosp.
no FC or hang or lag yet.
i just replaced the older *.img with this newer one and the older cachr data and zimage as it is.
no boot loops .only first boot is longer
Click to expand...
Click to collapse
which kernel you use? with sd card?
AurimasZ said:
which kernel you use? with sd card?
Click to expand...
Click to collapse
use the original zimage with screen caliberated for aosp.
after first boot of aokp go to setting and then rom setting there disable boot animation .
Finally I managed to boot.Really Like a charm.Very fast working.I liked it.But I can't find Google Play Store to download File manager
zmajster01 said:
bootloop
Click to expand...
Click to collapse
All hail to the most helpful post ever.
hero355 said:
Finally I managed to boot.Really Like a charm.Very fast working.I liked it.But I can't find Google Play Store to download File manager
Click to expand...
Click to collapse
It's not included by default. Look for "Google Apps" or "Gapps" package. You might need to apply it manually as it's usually CWM package.
Rebellos said:
It's not included by default. Look for "Google Apps" or "Gapps" package. You might need to apply it manually as it's usually CWM package.
Click to expand...
Click to collapse
Really My knowledge on Linux/Android is limited.Is it possible to add it manually ?
Edit : Found.Thanks
Best Regards
m90ultimate said:
use the original zimage with screen caliberated for aosp.
after first boot of aokp go to setting and then rom setting there disable boot animation .
Click to expand...
Click to collapse
Thanks man
Related
Hi guys !
I present the continuation of the thread started by Darkstone.
http://forum.xda-developers.com/showthread.php?t=777120
Try to do compilations updated whenever time permits me.
After several tests on various android roms I concluded to leave it at your choice.
The steps necessary to adjust to your version of Android are:
- Download: http://www.multiupload.com/LTJVZKCOLG
- Extract in your Android folder
- Edit startup.txt. Line: set KERNEL XXXXXX -> set KERNEL zImage
- Run Android
- Open GScriptLite (The scripts in http://www.multiupload.com/4XZXFBMGSS)
- Choose the payload and Ps3 FW
- Enjoy
Update 28-Oct:
Update to latest commits from kakaroto git
http://github.com/kakaroto/PSFreedom/commit/a61ec1ebf08ccd826f7565ac2f34eb609028ad8f
Kernel updated to Hastarin 7.7
Download: http://www.multiupload.com/Z2NNU54JPF
Extract in your favorite Android Rom
I recommend this -> http://forum.xda-developers.com/showthread.php?t=735532 (Fast and stable)
Click to expand...
Click to collapse
Update 9-Dec:
Dan1j3l has released a new version for ps3 downgrade (jig mode)
View in post http://forum.xda-developers.com/showpost.php?p=9700033&postcount=515
I haven't tested yet because I haven't time, sorry.
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------
Thanks to:
Kakaroto & Hermes for Psfreedom + Payload
Hastarin & Alephzain & Darkstone &Klutsh & Axionkt & other users of #psfreedom for support
InVisibleGoD & Corp1 for testing
Awesome news mangahoteles!
Are you using latest 4b payload?
Will test it right now...
Info Warning
Be sure that when your using different ROMS be sure to uninstall previous versions of Gscript -Lite then reinstall with apk included with rar then do a reboot before pl3 and Hv4 will show up in you gscript..
thank again - Mang
Thanks mangahoteles .
I'm downloading now.
anyone tested?
this psfreedom is with pl3 or Hv4? or both?
poczesaniec1 said:
anyone tested?
this psfreedom is with pl3 or Hv4? or both?
Click to expand...
Click to collapse
It have both!
Only tested with Hermes payload and it's working great.
wow...great news..both payload included.....
its like dream come true...
thanx mangahotels..hope you can continue wit this as long as u can...we will support you to the end...
keep up the great work!!!!
how have both, patch mode in open manager does not work?
where I can choose the payload?in gscript don't see the option
Excellent work mangahoteles!!!
Thanx mangahoteles!!!
Good job
Thanks for keeping the project updated
where I can choose the playload please help?
poczesaniec1 said:
where I can choose the playload please help?
Click to expand...
Click to collapse
Did you do what clayboy said?
clayboy said:
Be sure that when your using different ROMS be sure to uninstall previous versions of Gscript -Lite then reinstall with apk included with rar then do a reboot before pl3 and Hv4 will show up in you gscript..
thank again - Mang
Click to expand...
Click to collapse
I have old psjandroid,and new gscript put on directky to sd card,and if i have run first gscript without rebot,what I have do now?all from firs step?
ALL works, I have reinstaled GScript and without reboot all it's ok
thank's for all
hi mangahotels...
when u said any android...can u b specific which...
i used froyo sense by darkstone..latest one...will this works...tq
@ mangahoteles
Is there any way you can upload a full android rom with this built in like you did before?
@Biz there is already one this if to give you the option to load on other roms
clayboy said:
@Biz there is already one this if to give you the option to load on other roms
Click to expand...
Click to collapse
I just didn't want to add it to a rom I use all the time. I have a extra hd2 and was using that just for psfreedom. So do I need to set up a new android on that hd2 and then copy these folders over? I'm just a bit confused with that. Sorry.
Just did it and it seems to work the way I asked above. Hopefully I can figure out the difference between pl3 and hermes, cause I still don't know wtf they do. Idk what one I should activate with gscript?.
Thanks clayboy.
The_Biz said:
I just didn't want to add it to a rom I use all the time. I have a extra hd2 and was using that just for psfreedom. So do I need to set up a new android on that hd2 and then copy these folders over? I'm just a bit confused with that. Sorry.
Click to expand...
Click to collapse
I think Thats what this is meant for, you just extract these files to your main Android Build then you wont have to switch between 2 different builds.
Dont Quote me on this though.
Hey guys!!
I'm here to introduce you the first Dual ROM for this device!!
Haven't you ever wanted to have the speed and awesomeness of AOSP ROM but without missing the special features of Stocks ROM (Tv OUT and so on.)?!?
This prebuild flashable zips I made allows you to install and boot into 2 different OSes according to the way you start the phone.
I wanted to start telling you that nothing would have been possible without the inventor of the special kernel inside the ROMs HellcatDroid and this is the kernel's thread if you need more info about it!
How this works?
There's a special kernel inside the ROM which is the same both for Sammy and for AOSP ROM which boot into a os (primary) just booting up the phone as we normally do. The secondary OS boots when you press the Recovery Combo. The recovery starts if you power off the phone and attach the charger.
here's a video explaining how it works :
VIDEO
Downloads and new procedure
I completely changed the procedure and the way you should dualboot...so this is the NEW procedure :
1)Go to recovery, make a nandroid backup and then wipe all your data (strongly suggested)
2)Install the ROM you want for PRIMARY OS (you can choose the one you mostly like here on xda!)
3)Then and only then choose between these beautiful ROMs for your SECONDARY OS :
CheckROM v4
MIUI 9.12
CM7
4)Enjoy!
IF YOU WANT TO RESTORE EVERYTHING BACK :
Install via CWM this package : RESTORE OS
This will delete your secondary OS permanently and leave just your primary with Siyah kernel
Changelog
-Brand NEW procedure!
-Restore Primary OS option
-CheckROM v4
OLD Downloads
Here's the most sweet part...
each ROM has a primary OS (more space and boots as you normally do) and a secondary OS (less space and boots with recovery combo)...
It depends on your preferences...however here it is :
http://www.multiupload.com/Y357LP81T9 > Clean Sammy (primary) MIUI (secondary)
http://www.multiupload.com/ZWGKORKUC4 > Clean Sammy (primary) CM7 (secondary)
http://www.multiupload.com/OCAVFNEL0N > MIUI (primary) Clean Sammy (secondary)
http://www.multiupload.com/RO00M8UC7P > CM7 (primary) Clean Sammy (secondary)
Final notes and instruction
Please just boot into ROMs and Recovery as it's shown in the video!!
DONT USE REBOOT TO RECOVERY or similar command because it can make you to be stucked in a single ROM!!!
The most stable ROMs are the one with Sammy ROM as primary just because it requires more space than AOSP but the others runs good as well.
THE SECONDARY OS HAS NOT SO MUCH SPACE!!! So you can't install many apps on it.
This thread is for development only. so if you have a suggestion send me a PM.
If you want me to create other ROMs just ask me and if you have technical problems write here in the thread and I'll try to answer to most of you.
I'll make further development just if I see that it is interesting for you as I am a very busy person!
If you want to edit your preference you can use lolboot app on the market here :
https://market.android.com/details?id=net.hellcat.droiddev.lolboot
Credits
-HellcatDroid for his kernel and his precious instructions
-Siyah for the base of this kernel which is able to run on every ROM!!
-CM7 team and MIUI for their beautiful ROMs
-Samsung for his good stock ROM
-LeoMar75 and GadgetCheck (visit CheckROM's thread here)
Enjoy and IF you want to contribute look at my signature and DONATE
Gonna try this!!!:d
To get the TV Out feature, can I use CM7 as primary and Sammy as secondary?
This would be just great for testing out beta/experimental ROMs on one partition without hampering your primary driver.
Good work mate!
Willl try awesome dude
Jibreil said:
This would be just great for testing out beta/experimental ROMs on one partition without hampering your primary driver.
Good work mate!
Click to expand...
Click to collapse
Or you can just do a nandroid...
pcboyy said:
To get the TV Out feature, can I use CM7 as primary and Sammy as secondary?
Click to expand...
Click to collapse
Thank you for the interest guys!!
However sure you can!!
It's uploading...that's what I do...I leave Stock ROM as secondary just for TV out and enjoy the awesomeness of AOSP as primary...
PS More has to come...slighter Stock ROM and better optimized AOSP...if you have any questions or suggestions please let me know!!
EDIT : New ROM Added!!
This seems to be one of the best things happened to SGS II in recent times, awesome!
Sent from my GT-I9000 using XDA App
what if battery complitly dies ? then can we charge it or it would go to recovery without charge???
and can we change the files inside preload folder with new MIUI (For example change it with the latest update for next week) ( if it's already MIUI ) or not ???
or can we change the main file(Primary files) with new weekly MIUI ( IF it's already miui as primary ) ?
Can this samsung one change to checkrom v4??
Sent from my GT-I9100 using XDA Premium App
Henrywcy81 said:
Can this samsung one change to checkrom v4??
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Yes...it could...but you should ask the permission to the ROM's dev first...and only then I'll start to make a double ROM with it...
If the battery dies you can attach the charger and it will charge your battery even if it's in recovery...wait some minutes and then reboot...and it's done...
If MIUI or CM7 is PRIMARY you can directly update it with the weekly package provided by the ROM team...it's fair...
if you have MIUI or CM7 as SECONDARY you should change the updater script of the secondary or change the preload dir as you said...
however if there'll be a great interest I'm gonna update it very very frequently...so there'll be no need to do this...
I'm going to make the Samsung ROM much lighter...MIUI or CM7 ROM as PRIMARY is however the best choise if you want to stay up to date with these ROMs...
Cheers dude!
And thank you for the interest shown...
thank you alot...
yes
miui would be a great idea as a primary and sammy as second ...
now...
i'm going to flash this amazing ROM/KERNEL/ ( don't know what should we call it ... but it's great ... )
but one last question ....
if we update through rom updater in the miui what would happend to kernel ???
---------- Post added at 03:47 PM ---------- Previous post was at 03:22 PM ----------
WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOW...
it's VERY CLEAN... FAST... Without ANY Problem ...
just i should test the Battery/wifi/Bluetooth and ... just because of new kernel ...
thank you so much
keep UP the GOOD and Amazing work...
Quick question: the Japanese SGS2 (the sc-02c) is a bit kernel needy, and thus really only responds to siyah kernel and stock. If I install this rom, but then reflash siyah's kernel, am I just wasting time?
I cant get it work. I am stuck at boot screen.
1 Problem :
for the first time i flashe sammy+miui and every thing goes well
but then i flashed miui+sammy and it's not going to recover as you mentioned at OP
please help...
i don't know what to do...
i want Flash RTL Patch on my miui ( Which is the primary rom for me )
What version of Siyah is being used to power this? Thx.
Also why not link to hellcat's app?
Doesn't work for me either. Installed Sammy as primary as miui as secondary. Phone now only boots into miui whether I hold recovery buttons or not. Also phone does not boot into recovery so I now need to flash back via ODIN.
Lolboot
If anybody has it working could you install lolboot from market and check if it works with it?
nilsido said:
I cant get it work. I am stuck at boot screen.
Click to expand...
Click to collapse
jimhaddon said:
Doesn't work for me either. Installed Sammy as primary as miui as secondary. Phone now only boots into miui whether I hold recovery buttons or not. Also phone does not boot into recovery so I now need to flash back via ODIN.
Click to expand...
Click to collapse
Please keep in mind that it's still under development and I need some time to make it work properly...I'm going to put fast link to boot into a OS using a simple command in the other ROM...
Probably you used command like "boot in recovery" or something similar...the kernel made by HellcatDroid is still under dev and need some fixes...
You could just install another normal kernel and go back to recovery with the classic combo...
bclark said:
What version of Siyah is being used to power this? Thx.
Also why not link to hellcat's app?
Click to expand...
Click to collapse
It's 2.0 however the first thing I made is to link everybody to HellcatDroid thread in which there's a section for his app...
NO OTHER KERNEL ARE SUPPORTED FOR THE MOMENT!
I'm sorry...
I'll continue my development to make it much stabler...for the time being it do need some fixes...I totally agree with you...
Hey there folks,
I'm a global moderator from MadTeam and working on the development of the ICS, first specialized just for Galaxy 5 and now is a great site for news and other cells and tabs development.
So, cutting the crap, this is the new page for the ICS for galaxy 5 on this site, and all the latest releases will be shared here. And here we go:
Thread Updated For Latest Release:
Alpha 3 released
Gapps revised by MadTeam
What is working:
. Audio
. SMS, MMS etc...
. Wifi
. Keyboard
In progress:
Camera and the good rest
How to Install ROM:
. Back Up your current stable ROM.
. Perform data wipe/factory reset.
. Go to Advanced and perform wipe dalvik cache
. Install the CM9 release.
. Install hotfix.
. Wait 5-10 minutes for first boot to complete (odexing).
Hotfix
UPDATE:
I fixed the issues with alpha 3 fixed and,
No orange flashs on the screen anymore, I've added a new kernel, framework and other things, so no need to install alpha 1 now
FOLLOW THE INSTALL GUIDE STEP BY STEP,
THIS IS AN ALPHA VERSION AND CAN EXPLODE YOUR PHONE
hy there. i download allmost all packages less then ics root package. i cannot access the file. can u reupload and paste the links. please.
DjSylvester said:
hy there. i download allmost all packages less then ics root package. i cannot access the file. can u reupload and paste the links. please.
Click to expand...
Click to collapse
Updated,
thx.
great! will glad to flash cm9 on my little brother's galaxy 5!
keep up the great job.
i have downloaded all the stuff except the root because of the fbi taking down megaupload. if it is possible to reupload to different site tnx
patsplantes said:
i have downloaded all the stuff except the root because of the fbi taking down megaupload. if it is possible to reupload to different site tnx
Click to expand...
Click to collapse
I would like that also
Thanks for this!
If you need help with testing the rom then send me a message whenever, my G5 is just collecting dust so I might as well get some use out of it, I honestly don't care if it breaks as the warranty has ran out anyway.
MrBC said:
I would like that also
Click to expand...
Click to collapse
patsplantes said:
i have downloaded all the stuff except the root because of the fbi taking down megaupload. if it is possible to reupload to different site tnx
Click to expand...
Click to collapse
Just click on the Wupload link
Thread update.
thanks for the update
but your download link at the end of first post is not working can you pls fix that
Tested
I didn't read the part about the exploding phone correctly or i would never have done it!
Startup was just the screen flashing bright yellow rapidly for about 30 seconds and then going dark. If you touched the screen or buttons then the display would activate and you can see it for a moment. I managed to get through the setup wizard to the main screen, the app drawer and access the rom manager app. Then rebooted into recovery from the home screen and restored my phone to cm7 1.9.
Amazing that i (on some level) had ics running on my phone Well done guys!
cmw was different too, it had a ***go back*** option at the bottom of each additional screen.
Exactly same here.
It have the *go back* button cuz is a cwm 5.2.7 based.
You must follow the guide correctly.
Chucky-PT said:
Exactly same here.
Click to expand...
Click to collapse
Does data not work for anyone else?
EoinSheehy said:
Does data not work for anyone else?
Click to expand...
Click to collapse
Data doesn't work in this version due to incompatibility with some European chips so mota disabled it
Sent from my GT-I5500 using Tapatalk
derrend said:
I didn't read the part about the exploding phone correctly or i would never have done it!
Startup was just the screen flashing bright yellow rapidly for about 30 seconds and then going dark. If you touched the screen or buttons then the display would activate and you can see it for a moment. I managed to get through the setup wizard to the main screen, the app drawer and access the rom manager app. Then rebooted into recovery from the home screen and restored my phone to cm7 1.9.
Amazing that i (on some level) had ics running on my phone Well done guys!
cmw was different too, it had a ***go back*** option at the bottom of each additional screen.
Click to expand...
Click to collapse
Thread updated no orange screen anymore.
installation problems
Installed the fix fine but clockworkmod displays an error when flashing mad rom apps. Had no problem with gapps previously so suspect fix.
derrend said:
Installed the fix fine but clockworkmod displays an error when flashing mad rom apps. Had no problem with gapps previously so suspect fix.
Click to expand...
Click to collapse
Definitive and tested Alpha 3 for Galaxy 5,
Storage access and new yellow boot animation included(New CM9 3d boot animation)
Permission to install Gapps working.
hyztname said:
Definitive and tested Alpha 3 for Galaxy 5,
Storage access and new yellow boot animation included(New CM9 3d boot animation)
Permission to install Gapps working.
Click to expand...
Click to collapse
It works but is no more usable than previous version of alpha.
We do all appreciate the hard work though hyztname so keep at it
What i want is to play with some new features and show off to my friends but i suppose that's what beta is for
Too impatient.
derrend said:
It works but is no more usable than previous version of alpha.
We do all appreciate the hard work though hyztname so keep at it
What i want is to play with some new features and show off to my friends but i suppose that's what beta is for
Too impatient.
Click to expand...
Click to collapse
Yeah you are right,
But we all have to start from the small part.
Thx for the appreciation.
CM11 for WAVE and WAVE 2
Android Kitkat 4.4.4
Hi All,
in this Topic i am making android 4.4.3-4
LionDroid=Nima.yavari
features
Android 4.4.4
base cm
kernel of badadroid
Odexed Rom
change Some app
Downloads
ROM
V3.1
http://opizo.com/jVoDB
new kernel 310mb [thanks to hero]
http://opizo.com/zc6Al
Known Bugs
Same badadroid
No video recording & playback totally (Use MX player f.e) [bug for kernel]
Installation
Bada 2.0 is required
Warning! It will remove Bada!
SD Card is required. (fat32 format!!!)
- Download BOOTFILES, SD FOTA for your device:
for 8500:
https://yadi.sk/d/Yz7_dfpkC6TkC
http://dl.mobilestan.net/index.php/files/get/-9T69jPHYB/armlinux-boot.rar
for 8530
https://yadi.sk/d/cBPD41VEbP2od
http://www.mediafire.com/download/otya5kz2bios3go/armlinux_boot_NAND_S8530.fota
Download ROM and kernel
kernel: rename boot.img to zImage and copy tu sdcard
rom: copy to sdcard
flash boot and fota
- After reboot it will open android recovery
** Wipe -> Advanced wipe -> Check "every thing Without sdcard" -> Repair or change File Sytem -> Change File System -> Ext4 -> Swipe
now->Back -> Back >Back -> Back -> install -> rom.zip -> swipe to install -> reboot system
For activation Performance and Developer Options categories in Settings you need Settings->About Phone and tap 7 times on Build number
GAPPS
GAPPS make our ROM slowler, because also slim GAPPS take about 15-20 MB RAM permanently
SLIM GAPPS: http://d-h.st/users/ZordanKV/?fld_id=28623#files
HOW TO UNINSTALL
Follow the steps there: http://forum.xda-developers.com/showpost.php?p=35107469&postcount=393
changelog ROM
CM update 2015/01/18
new kernel
Increase smoother
Better Battery Life
more stable
more ram
some the problems correct
other....
changelog KERNEL
Optimization
THANKS TO
volk204
Rebellos
blue59
hero355
Tigrouzen
alberto96
and other Badadroid devs
archive
nand & sd rom
rom android 4.4.4
V2.1
http://www.mediafire.com/download/5i925lajqs1lcv7/CM11_4.4.4_LionDroid_V2.1.zip
kernel
V1.3
nand
http://filemoney.com/qkp04sq8jgep.html
V1.2
sd
https://mega.co.nz/#!b9gRHLjL!H-OfleDutvCd5-wOEvQ8lI8X2BTQlNfJNOMbq0XIc8o
Installation
dual boot
Bada 2.0 is required
Enter Bada Settings->General->Memory and make sure you have at least:
370MB of free "System" memory
160MB of free "User" memory
400MB of free "Applications" memory
Download BOOTFILES, armlinux_boot for your device:
for 8500:
http://yadi.sk/d/W4RjnjQRC6TfP
http://yadi.sk/d/Yz7_dfpkC6TkC
for 8530
http://yadi.sk/d/kxJ0CZ20C7AKF
http://yadi.sk/d/zqzWZ9LmC7AJA
(please pay attention if it's S8500 or S8530 BOOTFILES and FOTA you're choosing!):
Download ROM from CHANGELOG section
Start Bada.
Extract zImage from zip and copy it to the Bada's User partition (the one about 390MB big).
Copy whole .zip to the Bada's User partition or SD Card.
Flash BOOTFILES and FOTA using Multiloader.
Reboot the phone holding Power and Call key.
FOTA set of red messages should appear, after about 15seconds Badadroid logo shows up.
Be patient, first bootup will keep unresponsible on Badadroid logo for up to 5 minutes.
CWM Recovery starts, pick:
- "install zip"
- "choose zip from from storage/sdcard1"(Bada's User partition) or "choose zip from storage/sdcard0"(SD Card)
- cm-11-wave-<release id>.zip
- Yes - install
Reboot holding the Power key
NAND
Bada 2.0 is required
copy zImage and rom.zip on memory card
Download and flash fota file
for s8500
http://dl.mobilestan.net/index.php/files/get/-9T69jPHYB/armlinux-boot.rar
for s8530
http://www.mediafire.com/download/otya5kz2bios3go/armlinux_boot_NAND_S8530.fota
Reboot the phone holding Power and home
CWM Recovery starts, pick:
install zip/choose zip from from storage/sdcard/name rom.zip/yes
Click to expand...
Click to collapse
V2
http://www.mediafire.com/download/ozcsehogvlf5yn4/CM11_4.4.4_LionDroid_V2.zip
V1
http://www.mediafire.com/download/hshvvh9hcvgt9cb/cm+4.4.4+[LionDroid].zip
Click to expand...
Click to collapse
android 4.4.3
V1.2
nand & sd
http://www.mediafire.com/download/0k7y8w8q1w04ebf/CM_11_4.4.3_V1.2_NAND_&_SD_LionDroid.zip
Dual boot
V1.2
http://www.mediafire.com/download/79puyw32z8ohd23/CM11+4.4.3++V1.2+[LionDroid]
V1.1
http://www.mediafire.com/download/3saah3nottm8eno/CM+4.4.3++v1.1+[LionDroid].zip
V1
http://www.mediafire.com/download/4em4qy3rv45oawn/cm_4.4.3_{LionDroid}.zip
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
patchs
camera and video player
http://www.mediafire.com/download/33qz1qy18ci03a7/filmbardari(cm11).zip
of topc for volk Source
http://forum.xda-developers.com/showthread.php?t=2609560
kernel
V1.2
nand
https://mega.co.nz/#!Xxh1iQaB!kp9Ix9pDPgPjMVfpWM2fbxhBbEM84p_vVrYF0tdtgXU
sd
https://mega.co.nz/#!b9gRHLjL!H-OfleDutvCd5-wOEvQ8lI8X2BTQlNfJNOMbq0XIc8o
V1.1
nand
https://mega.co.nz/#!fs4WBLzK!ODdqZohk_ASqfNe8vAwySyzZD2hVCt2Nt4UHIJdpVfk
sd
https://mega.co.nz/#!ewo2zJ6A!hp8KzeZdLZ-TxyXIkvDAK34GPP_deEdTQaLdPCytiUk
Click to expand...
Click to collapse
thank very much beznox for kernel
http://forum.xda-developers.com/showthread.php?t=2789721
changelog
CM update 2014/06/19
Reduced ROM size
Increase smoother
Better Battery Life
new kernel put on rom
Dada bug bara wave 2 chi dare
Sent from my HTC One X
elljeff021 said:
Dada bug bara wave 2 chi dare
Sent from my HTC One X
Click to expand...
Click to collapse
plz speak english
just wifi not work
next version for update and wifi coming soon
Great work and congrats for porting 4.4.3 on wave :good:
Please post few Screenshots of ur ROM.
Could you please compile it as NAND version and send me link as PM?
Thanks in advance!
Taxidriver05 said:
Could you please compile it as NAND version and send me link as PM?
Thanks in advance!
Click to expand...
Click to collapse
+1
wifi
Hi nima, glad to see you working on Badadroid
Could you share your sources somewhere, or, once every bug is solved, make a pull request to badadroid project ? Would be awesome.
About wifi, if it's not already done, you can try to reverse this commit : https://github.com/Badadroid/androi...mmit/3f5ad204b1746e997f144ef77b9fdbe567af5f44
Then build again (just kernel), it helped me with wifi some time ago.
new rom
update
I have used the CM11 v4.3 and v4.4 and can tell you without doubt that wifi works for normal and AdHoc version both without any problems. If you based your ROM on that, its really weird that WIFI is not working on yours. I think you should recheck bro.
By the way, nice work with the ROM!
Taxidriver05 said:
Could you please compile it as NAND version and send me link as PM?
Thanks in advance!
Click to expand...
Click to collapse
with kernel tigrouzen erorr fc com.phone
need new kernel nand for 4.4.3
TheBasterd said:
I have used the CM11 v4.3 and v4.4 and can tell you without doubt that wifi works for normal and AdHoc version both without any problems. If you based your ROM on that, its really weird that WIFI is not working on yours. I think you should recheck bro.
By the way, nice work with the ROM!
Click to expand...
Click to collapse
rom update and wifi worked
BenzoX said:
Hi nima, glad to see you working on Badadroid
Could you share your sources somewhere, or, once every bug is solved, make a pull request to badadroid project ? Would be awesome.
About wifi, if it's not already done, you can try to reverse this commit : https://github.com/Badadroid/androi...mmit/3f5ad204b1746e997f144ef77b9fdbe567af5f44
Then build again (just kernel), it helped me with wifi some time ago.
Click to expand...
Click to collapse
Sure
thanks for help
Taxidriver05 said:
Could you please compile it as NAND version and send me link as PM?
Thanks in advance!
Click to expand...
Click to collapse
+1
Sent from my Nexus 7 using XDA Free mobile app
Maybe BenzoX could compile...
Alternatively we should ask Tigrouzen...
Taxidriver05 said:
Maybe BenzoX could compile...
Alternatively we should ask Tigrouzen...
Click to expand...
Click to collapse
During nexts days i'll try to make a SD/nand version of Badadroid (thanks to Tigrouzen files). If i succeed, porting it to this rom should be easy.
BenzoX said:
During nexts days i'll try to make a SD/nand version of Badadroid (thanks to Tigrouzen files). If i succeed, porting it to this rom should be easy.
Click to expand...
Click to collapse
On Tigrouzen's facebook page, he said that he has released his ROM sources. Is this true ? Or I read it incorrectly?
It said something like 2.5 or 5 gb of compressed data....
If he has released his sources, why is his work still banned ? Sorry, am just curious.
OMG this things is FAST !!! :laugh: Tnx OP
TheBasterd said:
On Tigrouzen's facebook page, he said that he has released his ROM sources. Is this true ? Or I read it incorrectly?
It said something like 2.5 or 5 gb of compressed data....
If he has released his sources, why is his work still banned ? Sorry, am just curious.
Click to expand...
Click to collapse
It's not full sources, some files are missing but I don't know moderators opinion about it.
BenzoX said:
It's not full sources, some files are missing but I don't know moderators opinion about it.
Click to expand...
Click to collapse
why this app is not working here?
http://forum.xda-developers.com/showthread.php?t=1987032
can you release nand version?
thank yu very much
BenzoX said:
It's not full sources, some files are missing but I don't know moderators opinion about it.
Click to expand...
Click to collapse
badroid is awesome, my first love, because I flashed it the first time and tasted android on my wave, but it is a bit slow, laggy and I wish I could help with the dev, but since I cant, and volk204 is still continuing to support all the wave users, I respect his work and commitment. Hats off to that guy.
Just imagine, Rebellos, volk204 and Tigrouzen working together, all open sourced material, and all devs working, DAMN! that would be awesome.
I mean, a A9 Cortex CPU with a PowerVR SGX 540 GPU are considerably nice specs to toy around with.
PS: I just played Dead Trigger on High Settings in 4.0.4 the infamous "banned" CFW.
__________________________________________________________________________________________
TO OP
Click to expand...
Click to collapse
Hey, nice work with the ROM.
I have a request though. Can you make a ROM with Viper Sound FX ?
http://forum.xda-developers.com/showthread.php?t=2191223
This looks like a promising add on to your ROM. Also, is this ROM smoother than the current badroid, because after some days of use, WhatsApp took 9 mins to open! That was kind of scary. {Also one of the reason for me to migrate to 4.0.4 SD Rom}
Hello. Recently I recieved new xperia x10 and immediately started to cook sweet droid jellybeans for it from source.
This is first RAW build based on CMX10 sources with minor fixups.
Changelog:
Code:
*** v1 ***
- Sdcard daemon tune-up (R/W buffer tweak)
- Latest CM10.1.3 sources
- Removed chromium webview
- Disabled emulator build
- OMX video recording fix
- WiFi framework fix
- AR600 wpa_supplicant fix
- HWcomposer fix
- WiFi hostapd fix
- Unbloated
- Legacy SoftAP support
- O3 optimization
- Decreased debugging in system
Download zip..extract .ftf from it and flash using flashtool. then go to cwm.. make factory reset and flash zip.
Everything have to work fine.. please test and report.
Donwload HERE (kindly, don't make mirrors)
If you like this..feed me :good:
Peace out!
buddy this is great still after so much time our X10 is alive thanks to you
mate u did the inmpossible
in that honor if this build works i will make SOKP build for u guys and i will help fera make X10 run CM12
but still i am very suprised good work mate
glad we work together....
FIRST DEVELOPING SKILL GAINED BY WATCHING FERA WORK
Did it boot?
FeraVolt said:
Wusup guys. Me again. This time with some crazy thing - CM12 for x10. I don't have device on hands so I can't even tell you if it''s booting. Don't expect that anything will work on this build. Just be happy if it boots and provide logcat anyhow. I barely compiled this thing dealing with tonns of errors..starting over again and again..so this pre-alpha's main aim is - to boot. Please test and report.
Download here
no mirrors please..
Extract & flash .ftf from zip. then flash rom (if recovery is working ) but better flash rom first using CWM 6 then flash provided ftf..just in case nothing will work. make sure you will be able to restore your x10 from hell state UB only.
This is RAW build..mostly based on Tof's work..with 3.0.8 kernel.. (Thanks bud )
Finally..hit thanks button and feed me a juicy burger if this will boot :fingers-crossed: :good:
Peace out...
Click to expand...
Click to collapse
I will test and report you ASAP
flashed kernel. but cannot go to cwm. not even cwm lights.just showing feralab logo.
Wow Fera, you have excelled yourself here! I am so going to try this!!
Just tried flashing it and it only seems to flash the kernel (Flashtool flashes it really quickly, a couple of seconds, it would be much longer if it was the entire ROM flashing) Am I doing something wrong?
alex_ncfc said:
Wow Fera, you have excelled yourself here! I am so going to try this!!
Just tried flashing it and it only seems to flash the kernel (Flashtool flashes it really quickly, a couple of seconds, it would be much longer if it was the entire ROM flashing) Am I doing something wrong?
Click to expand...
Click to collapse
ok. cm12 kernel don't have recovery access..use any kernel with cwm6 to flash rom..then pull out battery and flash cm12 kernel to boot new rom.
Tried as you mentioned several times.
Downloaded rom file just provide ROM FILE WITHOUT ANY EXTENTION. just a file. When i rename it as zip, cwm says cannot open. When i rename as RAR, cwm cannot find file. Plz provide proper ROM.ZIP file if you can
reuploaded fixed zip and updated OP.
FeraVolt said:
reuploaded fixed zip and updated OP.
Click to expand...
Click to collapse
Hi Mate
I Hope this help's
doodownunda said:
Hi Mate
I Hope this help's
Click to expand...
Click to collapse
This is lovely..thanks... while installing cm12 x10 was simply out of space on system partiton... will delete some sht from .zip and reupload it...
EDIT:
http://ul.to/p8yjsnmt another try.
FeraVolt said:
This is lovely..thanks... while installing cm12 x10 was simply out of space on system partiton... will delete some sht from .zip and reupload it...
EDIT:
http://ul.to/p8yjsnmt another try.
Click to expand...
Click to collapse
Hi again Mate i keep getting error's trying to download.
It keeps redirecting to register and pay for download?
The free download is currently not available - Please try again later! Premium account users are not affected by this temporary limitation.
Ok I tried internet explore to download and it is now downloading. So it must of been my ad-blocker on chrome stopping it? It say's it will take approx 3 hour's. I'll try to reflash when it's finished.
Thank you
Tried to install this. Installed the rom first and then flashed the kernel. It gets stuck at the bootlogo. It doesn't spin like Kernel v27 does. I couldn't get logcat to connect to my phone so nog logs sadly
~Aeny
ROM and Kernel install without problems, however as above, the boot process hangs on the FeraLab logo. (waited over 10mins)
No dmesg available at this boot stage.
@FeraVolt maybe you should place /system on sd. Maybe you should check lx cm12 sources , they did the same. just an ext4 partition on sd must be made on user's side
TakisBeskos said:
@FeraVolt maybe you should place /system on sd. Maybe you should check lx cm12 sources , they did the same. just an ext4 partition on sd must be made on user's side
Click to expand...
Click to collapse
I don't have working x10 onhands and can't do amything more that this atm. I have an idea about system partition..dont worry... :good:
FeraVolt said:
I don't have working x10 onhands and can't do amything more that this atm. I have an idea about system partition..dont worry... :good:
Click to expand...
Click to collapse
Compiled cm10.1. Please test and report.
FeraVolt said:
Hello. Recently I recieved new xperia x10 and immediately started to cook sweet droid jellybeans for it from source.
This is first RAW build based on CMX10 sources with minor fixups.
Changelog:
Code:
*** v1 ***
- Sdcard daemon tune-up (R/W buffer tweak)
- Latest CM10.1.3 sources
- Removed chromium webview
- Disabled emulator build
- OMX video recording fix
- WiFi framework fix
- AR600 wpa_supplicant fix
- HWcomposer fix
- WiFi hostapd fix
- Unbloated
- Legacy SoftAP support
- O3 optimization
- Decreased debugging in system
Download zip..extract .ftf from it and flash using flashtool. then go to cwm.. make factory reset and flash zip.
Everything have to work fine.. please test and report.
Donwload HERE (kindly, don't make mirrors)
If you like this..feed me :good:
Peace out!
Click to expand...
Click to collapse
i installed rom by using gb kernel.Then i flashed jb kernel. rom booted. but when i move home screens, its always blur. cam worked,video record worked in law quality. ram usage is 192mb without any apps.i felt very slow and not much smooth when comparing with V40 gb. i couldn't take screenchots because there was no option. however happy with booting the rom.
tsyssampath said:
i installed rom by using gb kernel.Then i flashed jb kernel. rom booted. but when i move home screens, its always blur. cam worked,video record worked in law quality. ram usage is 192mb without any apps.i felt very slow and not much smooth when comparing with V40 gb. i couldn't take screenchots because there was no option. however happy with booting the rom.
Click to expand...
Click to collapse
Tried it today, if you install gapps the blur stops.
The rom is working quite well for what I was expecting.
It is a too laggy, process "com.android.phone" FC's and the notification bar freezes, you need to restart the phone. No reboots.
Wifi, bluetooth, gps, accelerometer, camera (8Mpx, video low), are all working.
This is a great first version of what could be a great rom for our old X10...
Thank you Fera!