Dear All,
Please help to root my clone Galaxy Note i9220 Pad, may be call star i9220 or star Pad, I cannot sure what is the model.
I try many root tools SuperOneClick2.3.3, TPSparkyRoot, DooMLoRD_v4_ROOT-zergRush-busybox-su and Moblie Uncle all cannot root the phone.
Please I just want to root the phone and not the flash a rooted rom, because I want to keep the original rom. Thank you.
By the way if any one have the offical rom of this phone, kindly give it too me too. The boot screen is on the third graph.
The phone comes with specs as below:
- Phone Model : star i9220 or i9220 or A9220
- Model number : Agold_6573 / e1108_v73_jbaol1g18
- Android version : 2.3.6
- Baseband version : MAUI.11AMD.W11.37.SP.V17.F1, 2012/03/14 16:45
- Kernel version : 2.6.35.7 Mon Mar 19 14:50:16 CST 2012
- Build number : ALPS.GB.FDD2.MP.V4.5
- CPU: MTK 6573
You help is very much appreciated.
Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the same phone
And I would like to root it too, and flash it with something else...
I've seen the same phone with an android looking like the android 4 version in cm9, but i don't know how/where the person got it.
I tried to ask, but he could only speak thai... And, I'm not very good in thai yet.
Hope someone english speaking have the answers
Russian and chinese solutions are out there...
sayan67 said:
And I would like to root it too, and flash it with something else...
I've seen the same phone with an android looking like the android 4 version in cm9, but i don't know how/where the person got it.
I tried to ask, but he could only speak thai... And, I'm not very good in thai yet.
Hope someone english speaking have the answers
Click to expand...
Click to collapse
I goodled a bit, and foud this: http://forum.china-iphone.ru/viewtopic.php?f=46&t=19264&start=660
Found some chinese pages too..
But i cannot read any of them, or understand googles translation...
Hope some english speaking come up with a solution soon!
sayan67 said:
I goodled a bit, and foud this: http://forum.china-iphone.ru/viewtopic.php?f=46&t=19264&start=660
Found some chinese pages too..
But i cannot read any of them, or understand googles translation...
Hope some english speaking come up with a solution soon!
Click to expand...
Click to collapse
Google translate: http://translate.google.com/transla...phone.ru/viewtopic.php?f=46&t=19264&start=660
Rooted Eggpadz Junior
Fisrt you download file Superuser-3.1.3-arm-signed.zip in http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
Copy file Superuser-3.1.3-arm-signed.zip to SDCARD-Phone
Turn off the Phone
Go into Recovery mode by pressing Power button and Volume UP button
You can download the instruction
cepi2110 said:
Fisrt you download file Superuser-3.1.3-arm-signed.zip in http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
Copy file Superuser-3.1.3-arm-signed.zip to SDCARD-Phone
Turn off the Phone
Go into Recovery mode by pressing Power button and Volume UP button
You can download the instruction
Click to expand...
Click to collapse
Where about Custom Rom ? or ROM to apply ?
Dricos said:
Where about Custom Rom ? or ROM to apply ?
Click to expand...
Click to collapse
That is just Rooted to Original ROM
It didn't work and i have no luck to root my MTK6573 phone, any more solutions to root original rom without flashing? Please reply ASAP please?
brewhoxs said:
It didn't work and i have no luck to root my MTK6573 phone, any more solutions to root original rom without flashing? Please reply ASAP please?
Click to expand...
Click to collapse
try this method..... http://forum.xda-developers.com/showthread.php?t=1847136
to root this phone with original rom / firmware
To root this phone with originial rom / firmware you can follow this instruction in website tokomuhe*com/treq-a10-pocket-2.html#comment-502 ( replace * with . )
if there are any questions please contact me directly on my Whatsapp +6285733298222
Regards,
Sabillio
Sabillio said:
To root this phone with originial rom / firmware you can follow this instruction in website tokomuhe*com/treq-a10-pocket-2.html#comment-502 ( replace * with . )
if there are any questions please contact me directly on my Whatsapp +6285733298222
Regards,
Sabillio
Click to expand...
Click to collapse
Still no luck bro, but still trying...
brewhoxs said:
Still no luck bro, but still trying...
Click to expand...
Click to collapse
You can follow the instructions contained in my website
Sabillio said:
To root this phone with originial rom / firmware you can follow this instruction in website tokomuhe*com/treq-a10-pocket-2.html#comment-502 ( replace * with . )
if there are any questions please contact me directly on my Whatsapp +6285733298222
Regards,
Sabillio
Click to expand...
Click to collapse
thats the correct link
http**//tokomuhe*com/blog/root-mtk6573-i9220-android-2-3-6-gingerbread-treq-pocket-1-without-flashing
---------- Post added at 11:05 PM ---------- Previous post was at 10:55 PM ----------
how to flash the newest firmware to this phone? which version is the latest at the moment 4.0.x or 4.1.x or only 2.3.xxx ???
---------- Post added at 11:12 PM ---------- Previous post was at 11:05 PM ----------
Sabillio said:
You can follow the instructions contained in my website
Click to expand...
Click to collapse
where on your site can i download Saya Menggunakan Zhuodashi Versi 2.2.17 ???
but my biggest problem is: i had try to root it with this Jacquelyn Reed-Haipai I9220 MTK6575-20130112-254a --> but not work. and then try it with this MTKdroidTools 2.0.1.exe --> but also not work.
and after restart sd card is no more recognise!!! on this card was my backups of mybackup pro!!!!!
and if no newer firmware, where can i download the old firmware to make a completly new install????????????
nowhere????
model no.: e1108_v73_jbaol1g18flash8p4
upgrade to 4.1.1.
were the same Phone i want to upgrade also to 4.1.1 version. hope someone here can help.
thanks
w to Root the phone galaxy note II I9220? can someone help me
good afternoon
I have friend notte I9200 Galaxy Pad, and would make Root on my phone, but do not know which program to use.
and that there will be compatible?
he and a replica of galasy II Replica note.
can someone help me?
please
this configuration and it
C5b
I PAD 9220
Model: A520
android 4.0.3
kernel 2.6.32.9
the version number 20120926
cepi2110 said:
Fisrt you download file Superuser-3.1.3-arm-signed.zip in http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
Copy file Superuser-3.1.3-arm-signed.zip to SDCARD-Phone
Turn off the Phone
Go into Recovery mode by pressing Power button and Volume UP button
You can download the instruction
Click to expand...
Click to collapse
how to Root the phone galaxy note II I9220
good morning
in doing so I do not run the risk of losing my phone?
thank you
beto2051 said:
good afternoon
I have friend notte I9200 Galaxy Pad, and would make Root on my phone, but do not know which program to use.
and that there will be compatible?
he and a replica of galasy II Replica note.
can someone help me?
please
this configuration and it
C5b
I PAD 9220
Model: A520
android 4.0.3
kernel 2.6.32.9
the version number 20120926
Click to expand...
Click to collapse
Related
Hi,
Ive created a simple tool, which tries to find correct
full url of update zip for Sony Tablet S/P.
The process should take from 1s to 7min max.
There are two functions:
get URL+download - by manually typing update zip filename,
get URL+download [AUTOMATICALLY] - of current device firmware.
In order to successfully use auto function you must have proper region matching devices firmware.
Please post results, and very important!
- please post your new found zips urls here!
If you cant post in dev section, then feel free to send me a PM
with found urls
A BIG REQUEST TO ALL WHO WILL FLASH STOCK ICS
COMING SOON TO EUROPE REGIONS - PLEASE USE NO.2
FUNCTION AND PLEASE POST ICS URLS!
IT DOESN'T NEED ROOT, ITS 100% SAFE,
IT WILL HELP US ALL TO GET AS MUCH URLS AS WE CAN!
Changelog:
v1.3: fixed option no.2 for ICS devices!
v1.2: fixed for non-rooted devices!
v1.1: added auto function, few bugfixes, deleted.
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
br
condi
Updates.txt etc
Moved to http://forum.xda-developers.com/showthread.php?p=26882207#post26882207.
Thanks again to Condi for this great tool.
Chur
Hi condi, testing is ok, found US update lol.
Can I ask why ST is set to a max of ST004?
As I changed this higher and my updates were in ST006.
I could not find my ICS but oribably not there yet, but did find 0035.002 and 0042.002 in the ST006 folder.
Also noticed that 0035 was in 0005 folder
and 0042 was in 0006 folder
does this mean ICS should be in 0007 folder???
Or is that to logical
Anyway good work
Chur
stifilz said:
Hi condi, testing is ok, found US update lol.
Can I ask why ST is set to a max of ST004?
As I changed this higher and my updates were in ST006.
I could not find my ICS but oribably not there yet, but did find 0035.002 and 0042.002 in the ST006 folder.
Also noticed that 0035 was in 0005 folder
and 0042 was in 0006 folder
does this mean ICS should be in 0007 folder???
Or is that to logical
Anyway good work
Chur
Click to expand...
Click to collapse
ST004 is (I think last) one for Japan region.
About your update - propably it would be in next content dir,
maybe 0007, but if not found, then propably you have wrong filename.
Thanks for testing, I'm glad it works
PS. I'm thinking about next version, with new function, which will get current devices update zip, maybe even without root, and no filename needed
br
condi
found this, is italian 3.2.1 (at least for now) wifi +3g model (kernel 10)
http://info.update.sony.net/ST003/nbx03_010/contents/0002/signed-nbx03_010-ota-0042.004.zip
I found a new one but this was the german 3.2.R2
View attachment 1084559
http://info.update.sony.net/ST003/nbx03_007/contents/0007/signed-nbx03_007-ota-0042.017.zip
Didnt work!
Didnt work on indian 3.2.1 (r2) build5. (Before update it was build10). Filename is signed-nbx03_026-ota-0042.002.zip
xyancompgeek said:
Didnt work on indian 3.2.1 (r2) build5. (Before update it was build10). Filename is signed-nbx03_026-ota-0042.002.zip
Click to expand...
Click to collapse
Found here http://info.update.sony.net/ST006/nbx03_026/contents/0006/signed-nbx03_026-ota-0042.002.zip.
Once again ST006.
Same folder as New Zealand therefore http://info.update.sony.net/ST006/nbx03_026/contents/0005/signed-nbx03_026-ota-0035.002.zip is older 0035 aka 3.2 update.
Hmmm i see a patern here.
v1.1 released
Now we just wait for eu ICS
condi said:
v1.1 released
Now we just wait for eu ICS
Click to expand...
Click to collapse
Hi again, not sure if incr is working as expected for me.
This is the incr file:
awk: permission denied
grep: permission denied
rev: permission denied
rev: permission denied
cut: permission denied
write: Broken pipe
Thanks again condi for the great work
Chur
stifilz said:
Hi again, not sure if incr is working as expected for me.
This is the incr file:
awk: permission denied
grep: permission denied
rev: permission denied
rev: permission denied
cut: permission denied
write: Broken pipe
Thanks again condi for the great work
Chur
Click to expand...
Click to collapse
many thanks, for testing, and reporting
i forgot about missing busybox in non-rooted devices.
fixed version is up. please test it now
br
condi
Really stupid question: I used your tool (I live in nz) and got a url and it downloaded signed-nbx03_033-ota-0042.002.zip file.
Here is the stupid question----now what do I do.
My device is unrooted. Will this give me the ICS udate for New Zealand.
Regards
Colin
Condi, I am truly impressed. the amount of time and effort spent on the tab is definitely worthwhile. why not add this feature into the aio tool? also, is there any further breakthrough with cwm or custom roms?
thanks
xyan
colint3 said:
Really stupid question: I used your tool (I live in nz) and got a url and it downloaded signed-nbx03_033-ota-0042.002.zip file.
Here is the stupid question----now what do I do.
My device is unrooted. Will this give me the ICS udate for New Zealand.
Regards
Colin
Click to expand...
Click to collapse
It finds the URL for current firmware. The one you found is 3.2.1R2 (kernel 10)
This is what I have
ICS will be something like signed-nbx03_033-ota-120510001.zip
Which uses incremental number instead of 0042.002 etc.
Year=12 Month=05 Day=10 001=Incremental
Please note that is NOT correct file name.
ICS is not out for NZ yet, but should be by the end of month, guessing 31.05.12
Will add to my list (updates.txt, on first page) when it is av
Chur
---------- Post added at 05:51 PM ---------- Previous post was at 05:42 PM ----------
condi said:
many thanks, for testing, and reporting
i forgot about missing busybox in non-rooted devices.
fixed version is up. please test it now
br
condi
Click to expand...
Click to collapse
WORKS NOW, thanks from all non-root users .
Now every1 can do this, it is SIMPLE then post the URL and we can create a MASTER list for everyone on XDA
Chur
Thank you.
xyancompgeek said:
Condi, I am truly impressed. the amount of time and effort spent on the tab is definitely worthwhile. why not add this feature into the aio tool? also, is there any further breakthrough with cwm or custom roms?
thanks
xyan
Click to expand...
Click to collapse
The feature will be added to AiO, after 31. may. For now I want it to be separate module, easy to use, and get as much of ICS EU update urls as I can Dont know what will future bring to us
stifilz said:
WORKS NOW, thanks from all non-root users .
Now every1 can do this, it is SIMPLE then post the URL and we can create a MASTER list for everyone on XDA
Chur
Click to expand...
Click to collapse
Yeah thats what I wanted to achieve
few more days, and EU ICS will arrive ..
got this for indian tablet users
SGPT113IN/S
wifi+3g
3.2.1
kernal version build 9
http://info.update.sony.net/ST006/nbx03_027/contents/0002/signed-nbx03_027-ota-0042.004.zip
samyukta88 said:
got this for indian tablet users
SGPT113IN/S
wifi+3g
3.2.1
kernal version build 9
http://info.update.sony.net/ST006/nbx03_027/contents/0002/signed-nbx03_027-ota-0042.004.zip
Click to expand...
Click to collapse
Just added when I updated "updates.txt" on page one lol. List is now huge
Chur
---------- Post added at 02:24 AM ---------- Previous post was at 02:21 AM ----------
Here is the list so far. All links are one page one post 2, attached 'updates.txt'. All of these have some updates i.e 3.2.1 or 3.2. Not many have ICS. Please help to fill in any X's or add ICS links. This has taken a wee bit of time
Edit. Removed list please find on page 1 post 2.
Chur
i have unrooted ICS, I am getting this file: http://info.update.sony.net/ST002/nbx03_001/contents/0014/signed-nbx03_001-ota-120410004.zip
Two questions?
is this ICS? if it isn´t can I try to downgrade and then preroot before ICS again?
Is this flashable via recovery?
Thank you very much condi, you make all this things great!!
rfreeman said:
i have unrooted ICS, I am getting this file: http://info.update.sony.net/ST002/nbx03_001/contents/0014/signed-nbx03_001-ota-120410004.zip
Two questions?
is this ICS? if it isn´t can I try to downgrade and then preroot before ICS again?
Is this flashable via recovery?
Thank you very much condi, you make all this things great!!
Click to expand...
Click to collapse
That is US ics, if you are allready unrooted ics, then for now, you wont be able to root. That includes downgrading then rooting. You are on tbe waiting list like many others and similar to ne with kernel 10.
That rom is flashable also but for you it will fail as you allready have that version
Chur
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG isai LGL22 is a Japanese water-resistant G2 variant which has a microSD card slot, a IR port, Osaifu-Keitai and TV.
References
au: http://www.au.kddi.com/english/mobile/product/smartphone/lgl22/
LG: http://www.lg.com/jp/mobile-phone/lg-LGL22
pdadb: http://pdadb.net/index.php?m=specs&id=4958&view=1&c=lg_ks1204_g2_au_isai_lgl22
Hidden Menu
3845#*22#
Touch Firmware Upgrade: HW Device Test > Touch Test > Touch Firmware Upgrade
Firmwares Courtesy of Fairy Tale, wan8_kln, anonymous members and QQ group 263639652.
removed
Firmware Flash Instruction
tot instruction
kdz instruction
Android 4.2.2 JellyBean Root and Recovery
G2 Support Tool
Get a cwm_v*_lgl22.img from here and put it in ...\files\recovery then run "runme.bat".
Otherwise get a lokified TWRP or PhilZ Touch Recovery from here instead of CWM.
Android 4.4.2 KitKat Root
English: http://forum.xda-developers.com/showpost.php?p=53249488&postcount=308
日本語: https://sites.google.com/site/ma34ssss/lge/tools/g2_support_tool/how-to-use-for-kk
中文: http://bbs.gfan.com/android-7483086-1-1.html
Vietnam: http://lgviet.com/forum/threads/huóng-dãn-root-isai-tren-4-4-2.21058/
Android 4.4.2 KitKat Recovery
TWRP
CyanogenMod 11
cm-11-20140721-UNOFFICIAL-lgl22.zip
Any SIM card won't be recognized
还不能识别SIM卡
SIMカード認識しないです
CyanogenMod 12
Tekcafe
Any SIM card won't be recognized
还不能识别SIM卡
SIMカード認識しないです
Other ROMs
MIUI
CloudyG3
SphinX Isai
AOJP - Any SIM card won't be recognized so far
eXT for G2 series Mobile flash tool and tweaks by ma34s
Free
Donation
When your phone has got stuck after OTA with CWM installed (CWM flashable)
Zero_Fota_fix_ota_auto_recovery.zip
4G/LTE stabilize patch for docomo/SoftBank users (CWM flashable) Only for Android 4.2.2 JellyBean. This problem has been fixed on Android 4.4.2 KitKat.
LGL22_LTE_PATCH.zip
Original post: 2ちゃんねる 【root】 au isai LGL22 【sim unlock】 vol.2 #112
CloudyG2 NFC patch
L22_NFC.zip
Original post: #612 by A Sornchai
CyanogenMod project is pending due to the SIM card problem :\
CyanogenMod 11 still working in progress
Not Avaialble
Known issues of CyanogenMod 11
Baseband [Solved by ma34S]
microSD card mount [Solved by ma34S]
Wi-Fi [Solved by ma34S]
LED flash light [Solved by ma34S]
SIM card recognition (and also phone call and mobile network)
Camera focus
GPS [Solved by ma34S]
NFC
Osaifu-Keitai
We need your pull request
LG isai LGL22 [Water-resistant and microSD slot available Japanese G2 variant]
General Q&A
Q. Is this a G2 variant though called isai?
A. Yes. Search LG OpenSource Code Distribution for "LGL22" and you can see it's classified as G2.
Q. What are the differences with original G2?
A. This device has a microSD card slot, a IR port, Osaifu-Keitai and TV. In addition, it's IPX5 / IPX7 water-resistant but water submersion can cause damage. The battery capacity is 2500mAh and it's reduced more than original G2's.
Q. Can I use this phone on GSM network?
A. Yes. A number of XDA members unlocked their phone and they are using in their countries. A unlock code for international LG G2 works on this phone.
Development Q&A
Q. Can I root by using IORoot?
A. No. IORoot exploit has been patched in all Japanese G2 variants. You need to use g2_support_tool in OP.
Q. Has Loki exploit been patched?
A. Loki is executable on JellyBean firmwares. On KitKat firmwares it has been patched, however, Bump! vulnerability hasn't been patched.
KDZ flash instruction by @hoangthuong266
KDZ flash instruction by @hoangthuong266
If you have rooted or installed a ROM or a recovery, flash 10b tot before flashing 20b kdz so as to restore the firmware to factory condition.
English
hoangthuong266 said:
Download: http://www.mediafire.com/download/oz6r6cddxc1c09n/KDZ_flash_kit.zip
First, install B2Cappsetup.exe.
Second, delete C:\ProgramData\LGMOBILEAX folder and replace by LGMOBILEAX folder.
Third, run ScriptByMe.cmd in LG_Mobile_offline_mode folder, after that we enter to show this and select each dialog as below.
Select Upgrade Start and do the same as this image below
Make LG Isai phone to Download Mode and Press OK.
Click to expand...
Click to collapse
日本語
blackzigong said:
ダウンロード: http://www.mediafire.com/download/oz6r6cddxc1c09n/KDZ_flash_kit.zip
まずB2Cappsetup.exeをインストールします。
次にC:\ProgramData\LGMOBILEAXフォルダの中身をすべて削除し、ダウンロードしたLGMOBILEAXフォルダの中身で置き換えます。
そうしたらLG_Mobile_offline_modeにあるScriptByMe.cmdを実行するとこのような画面が表示されますので、以下のように選択して進めてください。
Upgrade Startを選択して画像と同じように設定してください。
isaiをダウンロードモードにしてOKを押してください。
Click to expand...
Click to collapse
Root and CWM Utility is now available in the OP.
CyanogenMod 11 for debugging
Updated g2_cwm_install_tool in the OP.
And also released CyanogenMod 11 for debugging in the OP.
We need your feedback and pull request.
The link is temporarily disabled to fix the kernel issue.
blackzigong said:
Updated g2_cwm_install_tool in the OP.
And also released CyanogenMod 11 for debugging in the OP.
We need your feedback and pull request.
The link is temporarily disabled to fix the kernel issue.
Click to expand...
Click to collapse
HI @blackzigong
LED flash light is fixed too.(it depend on camera fix)
ma34S said:
HI @blackzigong
LED flash light is fixed too.(it depend on camera fix)
Click to expand...
Click to collapse
Thanks, updated OP.
And I'm just uploading a new CM11 for debugging which includes @ma34S' changes.
blackzigong said:
Thanks, updated OP.
And I'm just uploading a new CM11 for debugging which includes @ma34S' changes.
Click to expand...
Click to collapse
thankyou^^
after i flashed •ma34S' CM based ROM called AOJP rom
baseband & MEID comes out
but the phone say "NO SIM"
how can i make the signal comes out?
thankyou^^
and the phone always in sleep mode
that can't wake up while press the power button.
i only can reboot it.
wan8_kln said:
thankyou^^
after i flashed •ma34S' CM based ROM called AOJP rom
baseband & MEID comes out
but the phone say "NO SIM"
how can i make the signal comes out?
thankyou^^
and the phone always in sleep mode
that can't wake up while press the power button.
i only can reboot it.
Click to expand...
Click to collapse
Thank you for your feedback.
It seems that the baseband is recognized but it can't recognize a SIM card yet due to a bug.
I heard about a sleep mode issue for the first time.
Issues is added in OP.
well I got a L22 today, would u plz tell me where I can download the latesr firmware V10b?
nicemblem said:
well I got a L22 today, would u plz tell me where I can download the latesr firmware V10b?
Click to expand...
Click to collapse
I don't have that firmware image. Update via FOTA.
ma34S posted a new AOJP rom for LGL22 on his website.
We need your feedback of a sim recognition and GPS.
If it helps lastest firmware is
LGL22AT-01-V10b-440-50-FEB-18-2014+0.zip
BigBoyPL said:
If it helps lastest firmware is
LGL22AT-01-V10b-440-50-FEB-18-2014+0.zip
Click to expand...
Click to collapse
ye and did u know where we can download it？
Yes I know where but I don't have B2B account so I can't download.
I posted my cm11 build in OP.
nicemblem said:
well I got a L22 today, would u plz tell me where I can download the latesr firmware V10b?
Click to expand...
Click to collapse
i have download firmware V10b but i forgot where got it, is there any way i can send it to u?
tolves said:
i have download firmware V10b but i forgot where got it, is there any way i can send it to u?
Click to expand...
Click to collapse
Would you share it here by using Dropbox or copy.com or something else?
blackzigong said:
Would you share it here by using Dropbox or copy.com or something else?
Click to expand...
Click to collapse
i have a TEST version of this phone
KDZ : V08d_00
do u need it???
v08d's baseband(1.9.10059) is different between v10a(1.9.10061)
v08d can use ONE CLICK ROOT
v08d building up seems like D80X
=======================================================
also i have full read of V10A phone block 1-38
if anyone needs, i can share.
wan8_kln said:
i have a TEST version of this phone
KDZ : V08d_00
do u need it???
v08d's baseband(1.9.10059) is different between v10a(1.9.10061)
v08d can use ONE CLICK ROOT
v08d building up seems like D80X
=======================================================
also i have full read of V10A phone block 1-38
if anyone needs, i can share.
Click to expand...
Click to collapse
That's cool!
Would you upload v08d_00 kdz firmware here?
Hi,
A thread has been created and was deleted.. so, as I tried it out, here are the steps..
Disclaimer : I m not responsible and report what has been working for my case which was as well leading to no data lost, no wipe so far.
Note : Having an alternate recovery (TWRP instead of 3e) would avoid a successfull any future phone update done through the menu. Updates will then have to be pushed with SP_Flash_Tool
Thanks : doogeemobile.com / original xda thread by gramolitero
What could be needed : -> Same tools and steps as the Doogee X5, except the Scatted for MT6735 and recovery.img files.
SP_Flash_Tools and Doogee X5 procedure
TWRP Recovery file, in English
+ Attached Scatter for Mediatek MT6735
- Optional- Doogee X5Pro Rom
Steps :
- Download/Unpack FlashTools, run Flash_tool.exe as an Administrator
- Select "Download Agent" and input MKT_AllInOne_DA.bin
- Select "scatter-Loading" and search MT6735_Android_scatter.txt
- Select "Download Only"
- Uncheck all boxes
- Checkmark and change the path of recovery file to be replaced.
- Make sure the connection is made through USB in the options (See screenshot)
- Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles in a new window is then displayed.. -> OK
- Finish !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once this recovery has been done.
- Boot the phone with Power and Vol+ simultaneously.
- Select "Recovery" with VolUp key, validate with VolDown key.
- Plug the phone to the PC, and drop the BETA-SuperSu.v220 on the SD Card
- Install SuperSU then reboot.
The phone is now rooted.. place to Xposed, or any apps through the TWRP recovery.
Regards
Pierrick
hi,
can you please post all files here because i can't download it from that link you posted here ( 01-Android_CDC_Driver.zip, 02-SP Flash Tool+Scatter File.rar, 03-TWRP Recovery for DoogeeX5.rar )
thx
found all files, but when i try instaling su i got error in recovery, my phone have R08 rom and idk if that is problem?
i rooted my phone, only i was using older version super su 2.46 i think, and i changed name to update, after that phone was rooted
finally someone recreate the thread:victory:
can it be an official dev thread of x5/x5pro? following the russian thread is really hard even with gTrans
days ago they released r09 firmware...hv anyone try it?
im still on r08 modded
lucaviend said:
finally someone recreate the thread:victory:
can it be an official dev thread of x5/x5pro? following the russian thread is really hard even with gTrans
days ago they released r09 firmware...hv anyone try it?
im still on r08 modded
Click to expand...
Click to collapse
i have 09 but didn't root again, i don't see any difference from 08
i just tried r09 today...yes i can felt the different from r08
i hope someone can make a cusom rom for this phone
Thanks a lot
i'm on R09 and I'm rooted already - it was easy as a breeze - it's time for LSpeed Optimizer.
TiA
nanotech17 said:
i'm on R09 and I'm rooted already - it was easy as a breeze - it's time for LSpeed Optimizer.
TiA
Click to expand...
Click to collapse
yup the root process is still same as before...
i'v flash L speed and bravia 4
Sooo, im from Canada and it won't work over here cause the Band Frequencies are not selected. I can see the right one I need to select, but they are blacked out. Will rooting the phone unlock those bands so I can choose the right frequency for Canada?
Love the phone, just whish I could use it here
rooting will not change phone's band freq
why is no custom rom for this phone. . .so sad -_-
Hold your horses boys. It's a new phone so it will take some time until there is a custom ROM.
Hopefully someone will port the CyanogenMod to this nice mobile.
Something else, has anyone tried the OTG functions? Can it read a thumb drive properly? I hope it has V4L2 drivers when I receive mine.
Does the twrp recovery actually work. I've flashed it to my phone and it doesn't work. Has anybody got any other links. Also the website where the recovery file is linked is blocked by windows
Worked perfectly, thank you!
If this helps anyone, I had issues getting the drivers installed, I followed this thread here; http://forum.xda-developers.com/showthread.php?t=2180436
It kept appearing and disappearing in Device manager, just click it as soon as it appear and then install the drivers. If it disappears it does not matter at that point
get a good good news veryone...
http://www.gizmochina.com/2015/12/23/oukitel-k6000-cm12-1-rom/
CM12.1 mt6735 link
https://mega.nz/#!GN0lWI7A!M0ZSROTp7c1gAP7B930vRj7m3blh0tF79gpuMff4-pk
edit: my wrong...it's cm12.1
my first read i thought it was cm13 marshmallow LOL
but...it's cool if CM rom can be ported for us
Hi
I need some help, the Doogee SW "SP_Flash_Tools and Doogee X5 procedure" is not available anylonger on thir server.
Anybody an idea how to get it?
Or can somebody upload, please.
Thanks and Merry X-MAS
linolino
~~~
Update I used the Names on the Doogee website to google for files.
-Found suiting USB Drivers
-found flash tool
With the OPs description and cross checking Doogees (non Pro) description
I was able to root - Thanks.
lucaviend said:
get a good good news veryone...
http://www.gizmochina.com/2015/12/23/oukitel-k6000-cm12-1-rom/
CM12.1 mt6735 link
https://mega.nz/#!GN0lWI7A!M0ZSROTp7c1gAP7B930vRj7m3blh0tF79gpuMff4-pk
edit: my wrong...it's cm12.1
my first read i thought it was cm13 marshmallow LOL
but...it's cool if CM rom can be ported for us
Click to expand...
Click to collapse
want to flash a rom of doogee x5 pro from twrp.
does anyone got the zip file to upload[COLOR="Silve[COLOR="Silver"]
---------- Post added at 01:13 AM ---------- Previous post was at 01:05 AM ----------
[/COLOR]i need the zip file to flash doogee x5 pro from twrp recovery
can anyone upload the file please
linolino said:
Hi
I need some help, the Doogee SW "SP_Flash_Tools and Doogee X5 procedure" is not available anylonger on thir server.
Anybody an idea how to get it?
Or can somebody upload, please.
Thanks and Merry X-MAS
linolino
~~~
Update I used the Names on the Doogee website to google for files.
-Found suiting USB Drivers
-found flash tool
With the OPs description and cross checking Doogees (non Pro) description
I was able to root - Thanks.
Click to expand...
Click to collapse
u can check here...doogee x5pro russian forum
http://4pda.ru/forum/index.php?showtopic=699029
use gTrans
reisrm said:
want to flash a rom of doogee x5 pro from twrp.
does anyone got the zip file to upload[COLOR="Silve[COLOR="Silver"]
---------- Post added at 01:13 AM ---------- Previous post was at 01:05 AM ----------
[/COLOR]i need the zip file to flash doogee x5 pro from twrp recovery
can anyone upload the file please
Click to expand...
Click to collapse
what zip? cm12.1?
it's there via mega but i dont if it work for x5pro because it's originally for oukitel k6000 (same processor)
Most of the files are missing/Links broken at doogeemobile.com/blog/doogee-x5-phone-root-guide.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi there my firends,
Here some help for every Meizu M5 owner who wants the latest Flyme 6 beta version now!
Youtube video here
Installation instructions :
Prepare your phone for update and back up what you need beacuse you will have to wipe some data.
GET ROOT ACCES -> log in to Flyme account and activate root from your Settings > Fingerprint & security > Root permission
Install the following apps Open them and make sure that each whone has root permission.
SuperSu 2.79 (from http://www.supersu.com/download not the latest version)
BusyBox (Playstore link) - open the app and install the system files also
Flashify (Playstore link)
Download the Flyme 6 system image to computer, unpack the system.img file and copy it to the phone, anywhere
Follow the Flashify instructions from the picture
Good to know: I tried and succed this on my Meziu M5 global version.
In this firmware, Flyme 6.7.6.13 beta , is only English and Chinese language
Credits :http://4pda.ru/
[FONT="]I am not responsible for anything , so you better know what you're doing.
[/FONT]
:victory: Enjoy your new firmware and have a nice day!
Change img m5 global
How to change img meizu m5 versi global? Help me pliss
joldisadrian said:
Hi there my firends,
Here some help for every Meizu M5 owner who wants the latest Flyme 6 beta version now!
Installation instructions :
Prepare your phone for update and back up what you need beacuse you will have to wipe some data.
GET ROOT ACCES -> log in to Flyme account and activate root from your Settings > Fingerprint & security > Root permission
Install the following apps Open them and make sure that each whone has root permission.
SuperSu 2.79 (from http://www.supersu.com/download not the latest version)
BusyBox (Playstore link) - open the app and install the system files also
Flashify (Playstore link)
Download the Flyme 6 system image to computer, unpack the system.img file and copy it to the phone, anywhere
Follow the Flashify instructions from the picture
Good to know: I tried and succed this on my Meziu M5 global version.
In this firmware, Flyme 6.7.6.13 beta , is only English and Chinese language
Credits :http://4pda.ru/
[FONT="]I am not responsible for anything , so you better know what you're doing.
[/FONT]
:victory: Enjoy your new firmware and have a nice day!
Click to expand...
Click to collapse
Dojoe si said:
How to change img meizu m5 versi global? Help me pliss
Click to expand...
Click to collapse
I dont understand what you want bro'
If you have a global version (G) firmware then you only have to proceed my instalation instructions.
If you have a chinese version (Y) firmare then you dont need to nothing what i wrote , just download the update.zip from Flyme page
Clear ?
Dojoe si said:
How to change img meizu m5 versi global? Help me pliss
Click to expand...
Click to collapse
Please don't quote whole OP next time
how to back Global?..
Why i can't update to Flyme 6.7.6.27 beta..when i try to instal update.zip always corrupt..
Mr frodo said:
Why i can't update to Flyme 6.7.6.27 beta..when i try to instal update.zip always corrupt..
Click to expand...
Click to collapse
Neither i couldn't instal the update.zip. but with the trick i described upper by installing only the system.img with Flashify you can update to Flyme 6 beta
Whats the password to unzip the file？
---------- Post added at 11:09 AM ---------- Previous post was at 11:07 AM ----------
joldisadrian said:
Hi there my firends,
Here some help for every Meizu M5 owner who wants the latest Flyme 6 beta version now!
Installation instructions :
Prepare your phone for update and back up what you need beacuse you will have to wipe some data.
GET ROOT ACCES -> log in to Flyme account and activate root from your Settings > Fingerprint & security > Root permission
Install the following apps Open them and make sure that each whone has root permission.
SuperSu 2.79 (from http://www.supersu.com/download not the latest version)
BusyBox (Playstore link) - open the app and install the system files also
Flashify (Playstore link)
Download the Flyme 6 system image to computer, unpack the system.img file and copy it to the phone, anywhere
Follow the Flashify instructions from the picture
Good to know: I tried and succed this on my Meziu M5 global version.
In this firmware, Flyme 6.7.6.13 beta , is only English and Chinese language
Credits :http://4pda.ru/
[FONT="]I am not responsible for anything , so you better know what you're doing.
[/FONT]
:victory: Enjoy your new firmware and have a nice day!
Click to expand...
Click to collapse
I cant open the zip file...it has a password. Can you help me？
jubeilecu said:
Whats the password to unzip the file？
---------- Post added at 11:09 AM ---------- Previous post was at 11:07 AM ----------
I cant open the zip file...it has a password. Can you help me？
Click to expand...
Click to collapse
For some reason it ask for password if you try to unzip from the phone. Copy the file to your PC and you'll see that no password is required.:good:
matt_axc said:
how to back Global?..
Click to expand...
Click to collapse
Why?
There are a lot of bugs? Which?
Heating problem is still present?
Thanks
Question about firmware
Is this a port? Because there's no beta build on the Flyme official site.
My device:
Meizu M5 32GB
Thanks!
Thanks for providing this!
Everything works fine and even better than in Flyme 5.2. Even the mobile-ID works fine with this, which I use a lot to log into sites. Didn't work with 5.2. That is a huge plus for me.
Ps! The app to flash the firmware with, is FlashFire, not Flashify. Little mistake in instructions, but can be understood, when looking at the screenshots.
the link to download the system file is no more availble
the link to download the system file is no more availble
zUnEm said:
the link to download the system file is no more availble
Click to expand...
Click to collapse
The link is live again.
Is it for M5 global?
Will gaining root access voids warranty?
Is Flyme 6 really working ?
rohanghawghawe said:
Will gaining root access voids warranty?
Is Flyme 6 really working ?
Click to expand...
Click to collapse
Gaining Root won't really void warranty as you can revert it back to normal afterwards, and yes Flyme 6 is actually working
The rom is great very smooth. But sim2 cant use 4g. And i have to lock 4g manualy on sim1 from #*#*4636#*#*. Are there a way to fix this or can i switch to f6.1.0.0y stable use recovery or update to latest beta version?
New version Flyme 6.7.8.8G beta with Full update.zip
Hi everybody !
I got great news for you.
New version Flyme 6.7.8.8G beta with Full update.zip It's much more easier than ever to update to Flyme 6 . No root or any modification required.
Sadly we still have to wait for Flyme 6 Nougat version
Here is my Youtube video about this update.
I got it and it works fine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is file.
Do you have OTA file?
Thanks so much!
Bhushantushar said:
Do you have OTA file?
Click to expand...
Click to collapse
read end of this thread(Here<- is file.)
It's for Black Shark Skywalker global? Can you tell me the procedure plz
carlosmara said:
It's for Black Shark Skywalker global? Can you tell me the procedure plz
Click to expand...
Click to collapse
1. Download and update the file with the name update.zip.
2. Place that file in storage/emulated/0/ota/update.zip
3. Dial *#*#1027#*#* and do accordingly.
Is anyone facing any issues after the update?
Does it void warranty or does it need any type of rooting and other stuff? Before installing or is ther any issues faced during update?
++++++ ota error(20) ++++++
Hi, I'm having an error, please help.
I already renamed the file to update.zip, and moved to "storage/emulated/0/ota/" folder.
when I hit "Local Update", it will have a note below my screen in red font: ++++++ OTA ERROR(20) ++++++
and when I hit "Pressure test switch", it will have a pop-up that says: The upgrade pakage list update_package_list or update_package_list_next does not exist.
I'm using BS2 Global.
my current version is: SKYW2005101OS01MQ0
do I need to update in another version before I can apply this OTA (MQ01)?
Thank you.
murcDF said:
Hi, I'm having an error, please help.
I already renamed the file to update.zip, and moved to "storage/emulated/0/ota/" folder.
when I hit "Local Update", it will have a note below my screen in red font: ++++++ OTA ERROR(20) ++++++
and when I hit "Pressure test switch", it will have a pop-up that says: The upgrade pakage list update_package_list or update_package_list_next does not exist.
I'm using BS2 Global.
my current version is: SKYW2005101OS01MQ0
do I need to update in another version before I can apply this OTA (MQ01)?
Thank you.
Click to expand...
Click to collapse
Hi. The ROM you're trying to flash is for the Global variant (S00). Your device is Global EEA variant (S01).
batuken said:
Hi. The ROM you're trying to flash is for the Global variant (S00). Your device is Global EEA variant (S01).
Click to expand...
Click to collapse
Ok bro, so hindi pala sya compatible.. sige, antay-antay nlng muna ako, sana maglabas din ng para variant ko..hehe salamatz!
murcDF said:
Ok bro, so hindi pala sya compatible.. sige, antay-antay nlng muna ako, sana maglabas din ng para variant ko..hehe salamatz!
Click to expand...
Click to collapse
Yep. Just wait for the official update. Kahit yung sakin S00, hindi ko to flinash. May tendency kasi talaga na nabrebreak yung OTA. And pansin ko rin sa updater, nag-iba sila ng server para sa updates.
All works great. Thanks
do I need to be root to make the upgrade?
I don't have rooted my bs2 and I can't access to the directory that you mention to store the update.zip file.
How much time is going to take the the phone download the upgrade automatically from the network.... I want to upgrade because I having problems with the mic is muted into the call when I plug or unplug a headphone or connect or disconect a bluetooth headphone....or if I change the audio source in any way the mic stop working and the person in the other side of the call can't hear me anymore.....
so please any sugestion to make the upgrade without root.....or how much to wait for the upgrade....
I don't want to root my phone....
You posted a thread previously where we can downgrade to Android 9. We can downgrade from this version also or need to go to MQ0 first?
alexdiaz73 said:
I don't have rooted my bs2 and I can't access to the directory that you mention to store the update.zip file.
How much time is going to take the the phone download the upgrade automatically from the network.... I want to upgrade because I having problems with the mic is muted into the call when I plug or unplug a headphone or connect or disconect a bluetooth headphone....or if I change the audio source in any way the mic stop working and the person in the other side of the call can't hear me anymore.....
so please any sugestion to make the upgrade without root.....or how much to wait for the upgrade....
I don't want to root my phone....
Click to expand...
Click to collapse
If your device doesn't have a folder named ota, there's no problem because you can just create it manually.
---------- Post added at 02:24 AM ---------- Previous post was at 02:24 AM ----------
Venus567 said:
You posted a thread previously where we can downgrade to Android 9. We can downgrade from this version also or need to go to MQ0 first?
Click to expand...
Click to collapse
Yes, you still can downgrade to Android Pie coming from this update. I have already tried it.
batuken said:
Yes, you still can downgrade to Android Pie coming from this update. I have already tried it.
Click to expand...
Click to collapse
Where is the setting to disable dual open application? I can't update to MP6. It shows some chinese words and Google translate says disable dual open application in setting but I can't find it. Can't post picture since it says need 10 post. Ok I decided to reset my phone, now the update succeeds. But new problem the update stuck at 0%. Tried waiting and restart but still always 0%. Nvm now it's working.
Overall, How is the update??
Is it better than Android 9??
I wanna try but don't know somewhere I am feeling I will go back to Android 9...Should I definitely give it a try?
ripiad said:
read end of this thread(Here<- is file.)
Click to expand...
Click to collapse
Can you please re-upload file! can't find it in thread.
ok..I do it
reporting.....I upgraded the phone and I have to report that all was ok, and yes the problem with the mic muted was fixed with this.... so I am happy with that....
The only thing that I would like is that the developers include the option to record the calls native.... I had this feature in my last xiaomi note, and I really miss it.... maybe is the only thing in the software that I don't like.... In hardware what I hate is the fact that don't have a 3.5mm audio output (I think that is a very bad decision in a GAMER phone)... I use the adapter with my headphones but is sad because I can't charge the phone or made a capture with hdmi because I using the port for the audio...
for hermanth
Overall, How is the update??
Is it better than Android 9??
I wanna try but don't know somewhere I am feeling I will go back to Android 9...Should I definitely give it a try?
Click to expand...
Click to collapse
I personally was lost with the android 9 (because I used a miui 11 with my last xiaomi so the upgrade make feel very confortable again I will recommend this upgrade).
for nijaardez
Can you please re-upload file! can't find it in thread.
Click to expand...
Click to collapse
I have troubles finding the file too.... the file link is in the first post of this thread just below the black image of Joy UI (there is a line of text that said HERE is file....just click in the word HERE is in orange color)
thanks to batuken for the help....in fact you can create manually a ota directory in the memory of the phone and then use de code to enter to upgrade menu (I use the steps of this link ( https://forum.xda-developers.com/black-shark-2/how-to/ota-update-a10-joyui-11-cn-version-t4039643 ) ... need to be patient i take about 10 mins or more all the upgrade .....sometimes take a lot of seconds in one determinated percent (like is freeze)...but just wait and let the phone upgrade ..... the first reboot after the update take a lot of time too....
best regards
Alex
batuken said:
Yep. Just wait for the official update. Kahit yung sakin S00, hindi ko to flinash. May tendency kasi talaga na nabrebreak yung OTA. And pansin ko rin sa updater, nag-iba sila ng server para sa updates.
Click to expand...
Click to collapse
Sir, safe po ba mag update via OTA. OS00MP6 to OS00MQ1, may officical rom na po na? Broken link kasi yung post ni wga0.